Computer Numerical Controller Machinist jobs at Wabtec Corporation

Full-time Description Machinist Functions: Sets up, programs, and operates machinery and equipment as directed. Completes customer product requirements as associated with work orders. Determines appropriate tooling/gages for part production/inspection. Performs in-process inspections as required to ensure 100% quality product. Identifies discrepancies in estimated setup and run times and resolves with supervisor. Responsible for document and data control of programs, tool lists, and other related data with respect to job packets/travelers. Responsible for cleaning and performing general maintenance on equipment as scheduled or required. Responsible for maintaining a clean, organized work area in accordance with Company programs, policies, and procedures. Responsible for stopping production if a part or process problem is identified and notifying supervisor or Quality personnel. Initiates nonconforming product procedures when necessary. Programmer Functions: Prepares programs for EIA machines. Maintains organized files with appropriate part information. Works with production and engineering personnel to develop efficient work holding methods. Edits programs on the production floor using machine specific programming methods. Prepares/processes drawings to aid in manufacturing of product. Controls programs/process drawings (revision levels, etc.) . Prepares overlays for inspection of parts. Maintains open communication with production personnel to ensure accurate programming information is provided. Programs and ensures the Integrex is operating continuously, productively, and to customer schedules. Helps develop setups and workflow that will allow significant second shift up time on the Integrex. Programs for other 3, 4, and 5 axis machines. Assists other Employees with technical questions/issues. Shared Functions: May create, revise, or finalize Work Instructions. Responsible for stopping production if a part or process problem is identified and notifying Manager or Quality personnel. Responsible for mentoring and/or training of other personnel as assigned. Responsible for identification and elimination of any unnecessary waste. Participates in corrective and preventative activities as required. Responsible to ensure production time and quantities are accurately clocked to jobs, together with shift clock in and clock out times in M2M/Shop Floor Manager for payroll purposes. Responsible to review Daily Labor Reports for accuracy. Remains productive by seeking out tasks and assisting others when slow or idle. Maintains open communication and works with other Departments as required or necessary. Participates in and supports the Company Quality System and all Environmental, Health, and Safety policies. Responsible to participate in continuous improvement and associated training. Responsible to adhere to the Company Quality Policy and to understand and follow all applicable Quality Work Instructions, Policies, and Procedures. Responsible to understand and follow all applicable Company Work Instructions, Policies, and Procedures. Performs other duties as assigned. This posting has no deadline because we accept applications on an on-going basis. Requirements Preferred at least 3 years of aerospace CNC machining and programming experience, or a combination of education and related aerospace experience resulting in full knowledge of the practices, procedures, capabilities, and requirements of the position and machinery, but not less than 1 year. Proficient use of Mastercam v.10. Advanced computer skills. CAD/CAM proficiency. High level of blueprint reading and interpretation skills. Comprehensive knowledge and understanding of appropriate inspection techniques and GD&T. Ability to competently perform part inspection using inspection equipment. Knowledge of raw materials and properties. Full understanding of Quality Systems. Exceptional analytical and problem-solving skills. Solid decision-making skills. Strong communication and interpersonal skills. Results driven; stress tolerance. Committed to adhering to established work schedule with zero absences or tardy occurrences. Ability to perform work accurately and thoroughly with attention to detail. Ability to work well in a fast-paced environment with frequently changing dynamics. Ability to work with multiple deadlines and commitments with little or no supervision; strong organizational, planning, and time management skills. A team player, willing to take on extra tasks as necessary and create/maintain healthy working relationships. Salary Description $20-$40 hour

Description: Shift: 3:00 PM to 1:30 AM / Monday to Thursday (Fridays off) 5% shift differential Sets up and operates numerically controlled horizontal/vertical lathe/mill to perform machining operations (turning, boring, facing, threading) using castings, billet, and bar stock. Reads process sheets/work instructions and blueprints to determine machining to be performed. Essential Functions Sets up, programs, and operates equipment as directed. Completes customer product requirements as associated with work orders. Determines appropriate tooling/gages for part production/inspection. Performs in-process inspections as required to ensure 100% quality product. Identifies discrepancies in estimated setup and run times and resolves with supervisor. Responsible for document and data control of programs, tool lists, and other related data with respect to job packets/travelers. Responsible for cleaning and performing general maintenance on equipment as scheduled or required. Responsible for maintaining a clean, organized work area in accordance with Company programs, policies, and procedures. Responsible for stopping production if a part or process problem is identified and notifying supervisor or Quality personnel. Initiates nonconforming product procedures when necessary. Responsible for mentoring and/or training of other personnel as assigned. Responsible for identification and elimination of any unnecessary waste. Responsible to ensure production time and quantities are accurately clocked to jobs, together with shift clock in and clock out times for payroll purposes. Responsible to review Daily Labor Reports for accuracy. Participates in corrective and preventative activities as required. Provides assistance to other Departments as necessary or required. Remains productive by seeking out tasks and assisting others when slow or idle. Participates in and supports the Company Quality System and all Environmental, Health, and Safety policies. Responsible to participate in continuous improvement and associated training. Responsible to adhere to the Company Quality Policy and to understand and follow all applicable Quality Work Instructions, Policies, and Procedures. Responsible to understand and adhere to all applicable Company Work Instructions, Policies, and Procedures. Performs other duties as assigned. This posting will close on 11/15/24 Requirements: Education/Skills/Abilities High school diploma or G.E.D. Prefer at least 1 year of machining experience General programming skills. Basic shop math (addition, subtraction, trigonometry) . Blueprint reading and GD&T skills. Ability to perform part inspection using inspection equipment. Good understanding of gage calibration. Ability to perform own set-ups helpful. Basic understanding of Quality Systems. Technical trade certification or related experience. Solid communication and teamwork skills. A team player, willing to take on extra tasks as necessary and create/maintain healthy working relationships. Physical Demands & Work Environment Working conditions are normal for both the office and manufacturing environment. While performing duties of this position, the employee is frequently required to stand (for moderate to long periods of time), walk, use hands to finger/handle/feel objects, and reach with hands and arms. Other frequent activities include, but are not limited to, push/pull of objects, bending, climbing, balancing, stooping, and twisting (torso). Work may involve lifting of materials and products up to 50 pounds. Working in the manufacturing environment requires the use of safety equipment to include, but not limited to safety glasses, safety shoes/boots, and gloves. Loose fitting clothes and jewelry are not permitted. Long hair is required to be tied back. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This Job Description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee holding this position. Duties, responsibilities, and activities may change at any time with or without notice

Job DescriptionDescription: Machinist Functions: Sets up, programs, and operates machinery and equipment as directed. Completes customer product requirements as associated with work orders. Determines appropriate tooling/gages for part production/inspection. Performs in-process inspections as required to ensure 100% quality product. Identifies discrepancies in estimated setup and run times and resolves with supervisor. Responsible for document and data control of programs, tool lists, and other related data with respect to job packets/travelers. Responsible for cleaning and performing general maintenance on equipment as scheduled or required. Responsible for maintaining a clean, organized work area in accordance with Company programs, policies, and procedures. Responsible for stopping production if a part or process problem is identified and notifying supervisor or Quality personnel. Initiates nonconforming product procedures when necessary. Programmer Functions: Prepares programs for EIA machines. Maintains organized files with appropriate part information. Works with production and engineering personnel to develop efficient work holding methods. Edits programs on the production floor using machine specific programming methods. Prepares/processes drawings to aid in manufacturing of product. Controls programs/process drawings (revision levels, etc.) . Prepares overlays for inspection of parts. Maintains open communication with production personnel to ensure accurate programming information is provided. Programs and ensures the Integrex is operating continuously, productively, and to customer schedules. Helps develop setups and workflow that will allow significant second shift up time on the Integrex. Programs for other 3, 4, and 5 axis machines. Assists other Employees with technical questions/issues. Shared Functions: May create, revise, or finalize Work Instructions. Responsible for stopping production if a part or process problem is identified and notifying Manager or Quality personnel. Responsible for mentoring and/or training of other personnel as assigned. Responsible for identification and elimination of any unnecessary waste. Participates in corrective and preventative activities as required. Responsible to ensure production time and quantities are accurately clocked to jobs, together with shift clock in and clock out times in M2M/Shop Floor Manager for payroll purposes. Responsible to review Daily Labor Reports for accuracy. Remains productive by seeking out tasks and assisting others when slow or idle. Maintains open communication and works with other Departments as required or necessary. Participates in and supports the Company Quality System and all Environmental, Health, and Safety policies. Responsible to participate in continuous improvement and associated training. Responsible to adhere to the Company Quality Policy and to understand and follow all applicable Quality Work Instructions, Policies, and Procedures. Responsible to understand and follow all applicable Company Work Instructions, Policies, and Procedures. Performs other duties as assigned. Requirements: Preferred at least 3 years of aerospace CNC machining and programming experience, or a combination of education and related aerospace experience resulting in full knowledge of the practices, procedures, capabilities, and requirements of the position and machinery, but not less than 1 year. Proficient use of Mastercam v.10. Advanced computer skills. CAD/CAM proficiency. High level of blueprint reading and interpretation skills. Comprehensive knowledge and understanding of appropriate inspection techniques and GD&T. Ability to competently perform part inspection using inspection equipment. Knowledge of raw materials and properties. Full understanding of Quality Systems. Exceptional analytical and problem-solving skills. Solid decision-making skills. Strong communication and interpersonal skills. Results driven; stress tolerance. Committed to adhering to established work schedule with zero absences or tardy occurrences. Ability to perform work accurately and thoroughly with attention to detail. Ability to work well in a fast-paced environment with frequently changing dynamics. Ability to work with multiple deadlines and commitments with little or no supervision; strong organizational, planning, and time management skills. A team player, willing to take on extra tasks as necessary and create/maintain healthy working relationships.

Job DescriptionDescription: Machinist Functions: Sets up, programs, and operates machinery and equipment as directed. Completes customer product requirements as associated with work orders. Determines appropriate tooling/gages for part production/inspection. Performs in-process inspections as required to ensure 100% quality product. Identifies discrepancies in estimated setup and run times and resolves with supervisor. Responsible for document and data control of programs, tool lists, and other related data with respect to job packets/travelers. Responsible for cleaning and performing general maintenance on equipment as scheduled or required. Responsible for maintaining a clean, organized work area in accordance with Company programs, policies, and procedures. Responsible for stopping production if a part or process problem is identified and notifying supervisor or Quality personnel. Initiates nonconforming product procedures when necessary. Programmer Functions: Prepares programs for EIA machines. Maintains organized files with appropriate part information. Works with production and engineering personnel to develop efficient work holding methods. Edits programs on the production floor using machine specific programming methods. Prepares/processes drawings to aid in manufacturing of product. Controls programs/process drawings (revision levels, etc.) . Prepares overlays for inspection of parts. Maintains open communication with production personnel to ensure accurate programming information is provided. Programs and ensures the Integrex is operating continuously, productively, and to customer schedules. Helps develop setups and workflow that will allow significant second shift up time on the Integrex. Programs for other 3, 4, and 5 axis machines. Assists other Employees with technical questions/issues. Shared Functions: May create, revise, or finalize Work Instructions. Responsible for stopping production if a part or process problem is identified and notifying Manager or Quality personnel. Responsible for mentoring and/or training of other personnel as assigned. Responsible for identification and elimination of any unnecessary waste. Participates in corrective and preventative activities as required. Responsible to ensure production time and quantities are accurately clocked to jobs, together with shift clock in and clock out times in M2M/Shop Floor Manager for payroll purposes. Responsible to review Daily Labor Reports for accuracy. Remains productive by seeking out tasks and assisting others when slow or idle. Maintains open communication and works with other Departments as required or necessary. Participates in and supports the Company Quality System and all Environmental, Health, and Safety policies. Responsible to participate in continuous improvement and associated training. Responsible to adhere to the Company Quality Policy and to understand and follow all applicable Quality Work Instructions, Policies, and Procedures. Responsible to understand and follow all applicable Company Work Instructions, Policies, and Procedures. Performs other duties as assigned. This posting has no deadline because we accept applications on an on-going basis. Requirements: Preferred at least 3 years of aerospace CNC machining and programming experience, or a combination of education and related aerospace experience resulting in full knowledge of the practices, procedures, capabilities, and requirements of the position and machinery, but not less than 1 year. Proficient use of Mastercam v.10. Advanced computer skills. CAD/CAM proficiency. High level of blueprint reading and interpretation skills. Comprehensive knowledge and understanding of appropriate inspection techniques and GD&T. Ability to competently perform part inspection using inspection equipment. Knowledge of raw materials and properties. Full understanding of Quality Systems. Exceptional analytical and problem-solving skills. Solid decision-making skills. Strong communication and interpersonal skills. Results driven; stress tolerance. Committed to adhering to established work schedule with zero absences or tardy occurrences. Ability to perform work accurately and thoroughly with attention to detail. Ability to work well in a fast-paced environment with frequently changing dynamics. Ability to work with multiple deadlines and commitments with little or no supervision; strong organizational, planning, and time management skills. A team player, willing to take on extra tasks as necessary and create/maintain healthy working relationships.

We are hiring for a CNC machinist for day and night shift. Day available (6:00am- 2:30pm) Night available (3:30pm - 12:00am) Job Responsibilities: · Operate CNC Milling centers. · Inspect own work. · Follow Shop Traveler and Drawing Instructions · Follow instructions of supervisor. · Comply with all ISO and BHI standards. Job Requirements · Able to follow instruction of manager. · Above average blueprint reading. · Able to read inspection tools and gages. · Able to inspect own work. · Ability to be trained in the operation of other manufacturing equipment as designated by a supervisor. Education and/or Experience: High School Graduate or GED Language Skills English skills are required. Salary Range $20.00-$33.00 depending on experience. PTO Vacation / Holidays/ Health benefits & 401K package available. To apply please submit your resume via the APPLY NOW button Equal Opportunity Employer

AMG, Inc., is an employee-owned company that was founded in 1977. We are a precision manufacturing company specializing in high-quality machining, fabrication, and assembly for a variety of industries. We take pride in our skilled workforce and our commitment to safety, quality, and continuous improvement. AMG, Inc. is seeking an experienced CNC Mill Machinist to join our 1st shift machining team at our Jefferson Ridge Parkway location. This role is responsible for setting up, operating, and inspecting CNC milling equipment to produce precision parts that meet engineering specifications and quality standards. Key Responsibilities * Set up and operate CNC milling machines to produce high-quality machined components. * Read and interpret blueprints, engineering drawings, and work instructions. * Select, install, and adjust tooling, fixtures, and machine offsets as needed. * Perform in-process inspection using micrometers, calipers, height gauges, and other precision measuring tools. * Make basic program edits or adjustments to ensure part accuracy. * Troubleshoot machining issues and maintain consistent part quality. * Document production activities in accordance with company standards. * Maintain a safe, organized, and clean work area, following all safety protocols. Qualifications & Skills * Minimum 3 years of CNC milling experience in a manufacturing or job-shop environment. * Strong blueprint reading skills and understanding of GD&T. * Proficiency with CNC controls (Fanuc, Haas, or similar). * Knowledge of cutting tools, speeds, feeds, and machining best practices. * Ability to lift up to 50 lbs and stand for extended periods. * Strong attention to detail, reliability, and commitment to producing quality parts. Preferred Qualifications * Experience with multi-axis milling equipment. * Ability to program or modify CNC programs (CAM or at the machine). * Familiarity with lean manufacturing concepts. * Must be 18 years of age and a U. S. Citizen. AMG, Inc. supports diversity and is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, gender, national origin, citizenship, age, disability or veteran status. ***************************************************************** ************************************************************************************************

Job Title: CNC Machinist Type: Direct Hire Compensation: $62400 annually Contractor Work Model: Onsite Hours: 2 nd shift is 3:00 pm-1:30 am Monday- Thursday Security Clearance: List security clearance requirements (delete if not needed) Responsibilities + Configure and operate computer numerical control equipment for various machining operations including turning, drilling, and milling processes + Interpret engineering drawings, blueprints, and technical specifications to produce components within required tolerances + Perform dimensional inspections and quality assurance using precision measurement instruments + Execute setup procedures for multi-axis turning centers and maintain optimal machine performance + Troubleshoot equipment malfunctions and perform routine maintenance tasks + Monitor production processes to ensure adherence to quality standards and delivery schedules Requirements + Demonstrated experience in CNC machining operations and programming + Proficiency in reading and understanding technical documentation and engineering drawings + Competency with precision measuring equipment and dimensional inspection techniques + Strong mathematical skills for performing calculations related to machining parameters + Technical aptitude for diagnosing and resolving mechanical issues + Experience with multi-axis lathe operations preferred + Ability to work effectively in a fast-paced manufacturing setting Compensation & Benefits Package Full-Time Position Financial Benefits: + Competitive base salary with overtime opportunities + Annual performance bonus + 401(k) retirement plan with 6% company matching contribution + Shift differential compensation + Double-time pay for extended hours + Overtime premium pay rates Health & Wellness: + Comprehensive medical insurance coverage + Dental insurance plan + Vision insurance benefits + Health Savings Account (HSA) options + Life insurance coverage + Employee Assistance Program Professional Development: + Paid time off policy + Professional development financial assistance + Tuition reimbursement program + Employee discount programs Work Schedule: + 10-hour shift structure + Evening shift timing + Regular overtime availability System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #282-Eng Pgh System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

CNC LATHE MACHINIST Department: Manufacturing **SIGN-ON BONUS AVAILABLE** A CNC Lathe Setup Operator at Rotary Systems will never face a boring day. As a Level 2 machinist you will be responsible for setting up 2-3 jobs per day, for short runs, on one of our modern CNC Lathes utilizing Fanuc controls: Mori Seiki, Okuma, Haas, or Nakamura-Tome. Every day you will enter a shop that is clean, climate controlled, and offering every resource necessary to help you be successful. Your work at Rotary Systems will be comfortable, yet challenging. Responsibilities: • Prepare the machine for daily use, and perform basic machine maintenance • Utilize the Machinists Handbook as a reference guide for operation • Load programs from the network onto the machine • Perform first article setup • Read and interpret a Gibs Cam set-up sheet • Read and interpret G&M code program at the machine • Read and interpret prints in order to callout dimensional sizes of various part features • Locate or create proper work holding (boring jaws) and install • Set tool lengths using tool pre-setter / probe • Locate, install, setup, and touch off tooling • Set tool geometry offsets • Set work coordinates • Run the first article through the program tool by tool • Make minor program edits at the machine • Utilize industry standard measuring equipment - including but not limited to micrometers, bore gauges, height stands, thread gauges • Inspect your own parts during first article set-up, between cycles and prior to obtaining Quality Department inspections • Basic operation of a CNC Lathe: loading and unloading parts, starting and stopping cycle runs • Run 2 machines in one work center, as situation dictates • Check and change tooling between cycles Qualifications: • 2+ years' experience on a CNC Lathe or a 2-year degree in CNC Machining • Strong basic math skills to include shop math and trigonometry • 4+ years' experience on a CNC Lathe • Some knowledge of G&M codes • Capable of lifting 50lbs regularly • Other duties as required 6:00 AM - 4:15 PM Monday - Thursday 40 hours per week

Job Title: CNC Machinist Type: Direct Hire Contractor Work Model: Onsite Hours: + 1st shift (1 opening): 6:30am-3pm Mon-Fri + 2nd shift (2 openings): 3pm-1:30am Mon-Thur + 3rd shift (1 opening): 8pm-6:30am Mon-Thur + Weekend (3 openings): 6:30am-7pm Fri-Sun Candidate must have a minimum of 2 years of CNC experience and expert in precision machining. Machinist I / II Basic Purpose and Objective of the Position: The Machinist is responsible for machine setup, operation, and troubleshooting to ensure all parts meet required specifications and tolerances. This role performs advanced machining functions, leads process improvements, and mentors lower-level machinists and operators. The Machinist collaborates closely with Quality and Engineering teams to drive efficiency, precision, and continuous improvement in all manufacturing processes. Major Responsibilities Primary Operations: + Set up and troubleshoot a variety of precision machining processes, including: + Cylindrical Grinding + Wire EDM (WEDM) + Surface Grinding Additional Desired Operations: + Core Drill + CNC Slice + SPLAP + Centerless Grind + MWS Key Duties: + Perform advanced machine setup and process troubleshooting to achieve and maintain tolerances below .0005". + Collaborate with Quality and Engineering teams to identify and resolve mechanical, process, and quality issues. + Conduct root cause analyses and recommend corrective or preventive actions. + Document and refine setup procedures and standard work instructions for improved efficiency. + Train and mentor Machinist I and Operator-level employees, fostering skill development and adherence to best practices. + Assist with machine repair and preventive maintenance activities. + Maintain compliance with all safety, quality, and production standards. + Execute autonomous maintenance schedules and support continuous improvement initiatives. Qualifications + High school diploma or equivalent. + 1-2 years of machining experience (Machinist I) or 2+ years for advanced level (Machinist II). + Expert knowledge of precision machining with proven ability to hold tolerances below .0005". + Strong mechanical aptitude and analytical problem-solving skills. + Proficient in reading blueprints and interpreting GD&T. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #706-IT York System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Job Description Lathe Machinist **SIGN-ON BONUS AVAILABLE** About the Role We are seeking a detail-oriented and experienced Lathe Machinist to join our team. In this role, you will be responsible for setting up and operating lathe machines to produce precision components. This is an exciting opportunity to contribute to high-quality manufacturing processes and support continuous improvement in a modern, climate-controlled facility. Key Responsibilities Set up and operate lathe machines to produce precision components Interpret technical drawings, blueprints, and CAD models to develop machining strategies Select appropriate tools, speeds, and feeds for efficient and accurate machining Inspect finished products to ensure they meet quality standards Collaborate with CNC programmers and engineers to troubleshoot and improve processes Maintain documentation for setups and operations Ensure compliance with safety and quality standards Qualifications Required: High school diploma or equivalent 3+ years of experience in lathe machining and setup Proficiency with manual and CNC lathe machines Preferred: Experience with precision components and tight tolerances Familiarity with ISO quality standards and lean manufacturing principles Skills & Competencies Strong understanding of machining processes and materials Excellent problem-solving and analytical skills Attention to detail and commitment to quality Effective communication and teamwork abilities What We Offer Competitive salary Career Development and Cross-Training Opportunities Health Insurance (Medical, Dental, Vision) Simple IRA and Roth IRA options with company contributions Paid Time Off (Vacation, Sick Leave, Holidays) Paid Term Life and Long-Term Disability Insurance Modern, Climate-Controlled Facility Monday - Thursday 6:00am - 4:15pm 40 hours per week with overtime available

AMG, Inc., is an employee-owned company that was founded in 1977. We are a precision manufacturing company specializing in high-quality machining, fabrication, and assembly for a variety of industries. We take pride in our skilled workforce and our commitment to safety, quality, and continuous improvement. AMG, Inc. is seeking a skilled TRAK Lathe Operator to join our 1st shift machining team at our Cohen Place location. This role is responsible for setting up and operating TRAK lathes to machine precision components according to engineering drawings, specifications, and production standards. Key Responsibilities * Set up and operate TRAK CNC lathes to produce high-quality machined parts. * Read and interpret blueprints, shop drawings, and work instructions. * Select and install tooling, adjust offsets, and verify machine parameters. * Measure finished parts using micrometers, calipers, and other precision instruments. * Perform basic program edits and adjustments as required. * Monitor equipment and report mechanical or quality issues promptly. * Maintain accurate production documentation and adhere to quality standards. * Keep work area clean and follow all company safety policies. Qualifications & Skills * Minimum 3 years of machining experience, preferably with TRAK equipment. * Strong ability to read blueprints and interpret machining tolerances. * Familiarity with CNC controls and basic G-code adjustments. * Excellent mechanical aptitude and attention to detail. * Ability to lift up to 50 lbs and stand for extended periods. * Strong work ethic, reliability, and commitment to quality. Preferred Qualifications * Experience machining in a job-shop or custom manufacturing environment. * Knowledge of cutting speeds, feeds, and tooling selection. * Problem-solving and troubleshooting skills. * Must be at least 18 years of age and a U.S. Citizen. AMG, Inc. supports diversity and is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, gender, national origin, citizenship, age, disability or veteran status. ***************************************************************** ************************************************************************************************

Job DescriptionSalary: DOE The Machine Operator/Warehouse Associate is responsible for the safe and efficient manufacturing of Misc. Metal goods utilizing multiple pieces of equipment. The Machine Operator is expected to produce quoted amounts of material as directed by the Plant Manager while putting safety, and quality at the highest regard. Core expectations: Exceed customer expectations by ensuring all quality standards are met, in accuracy, quality and timeliness. Operating various roll forming and CNC fabrication equipment in a safe and expeditious manner. Such As Plasma Table, Tube Plasma, Auto Saws. After certification, operates a forklift to load, unload and relocate materials and goods. Ensures a clean work environment by preventing clutter and debris by implementing 6S. Communicate clearly with supervisors and other team members. Continuously works to improve operations, decreases turnaround times, streamlines work processes, and works cooperatively and jointly to meet company and customer needs. Ensure that delivery tickets/packing lists are properly noted and turned in. Assisting maintenance of roll forming and break forming equipment Promotes a safe working environment and creates and enforces a safety culture to ensure that all he complies with plant and company safety procedures and policies. Possesses excellent listening and communication skills.

ENTRY LEVEL CNC MACHINIST Department: Manufacturing **SIGN-ON BONUS AVAILABLE** An Entry Level CNC Machinist at Rotary Systems will never face a boring day. You will gain experience operating 2-3 jobs per day, on one of our modern CNC Mills or Lathes utilizing Fanuc controls: Mori Seiki, OKK, Kitamura, or Kiwa. Every day you will enter a shop that is clean, climate controlled, and offering every resource necessary to help you be successful. Your work at Rotary systems will be comfortable, yet challenging. This entry level position provides a paid opportunity to obtain valuable skills and experience in a field with high demand and great earning potential. We also provide the opportunity for tuition reimbursement for technical college degree relating to Manufacturing Technologies. Responsibilities: • Operate CNC lathes and/or mills with guidance from a shop mentor • Learn to interpret machining symbols and procedures • Learn to read and interpret basic blue prints • Maintain work area and machines in safe working conditions • Participate in efforts for continuous improvement of processes Qualifications: • High degree of mechanical aptitude (are you good with your hands, mechanics, building things) • Able to lift up to 50 lbs. on a regular basis • Basic computer skills • Effective problem solving skills • Motivated - positive mental attitude and can accept constructive criticism • Ability to communicate and work with others • Adaptability - Ability to adapt to change in the workplace 6:00 AM - 4:15 PM Monday - Thursday 40 hours per week

CNC MILL MACHINIST Department: Manufacturing **SIGN-ON BONUS AVAILABLE** A CNC Mill Setup Operator at Rotary Systems will never face a boring day. You will be responsible for setting up and completing 2-3 jobs per day, for short runs, on one of our modern CNC Mills utilizing Fanuc controls: Mori Seiki, OKK, Kitamura, or Kiwa. Every day you will enter a shop that is clean, climate controlled, and offering every resource necessary to help you be successful. Your work at Rotary Systems will be comfortable, yet challenging. Responsibilities: • Prepare the machine for daily use, and perform basic machine maintenance • Utilize the Machinists Handbook as a reference guide for operation • Load programs from the network onto the machine • Perform first article setup • Read and interpret a Gibs Cam set-up sheet • Read and interpret G&M code program at the machine • Read and interpret prints in order to callout dimensional sizes of various part features • Locate or create proper work holding (indicating fixtures) and install • Set tool lengths using tool pre-setter / probe • Locate, install, setup, and touch off tooling • Set tool geometry offsets • Set work coordinates • Run the first article through the program tool by tool • Make minor program edits at the machine • Utilize industry standard measuring equipment - including but not limited to micrometers, bore gauges, height stands, thread gauges • Inspect your own parts during first article setup, between cycles and prior to obtaining Quality Department inspections • Basic operation of a CNC Mill: loading and unloading parts, starting and stopping cycle runs • Run 2 machines in one work center, as situation dictates • Check and change tooling between cycles Qualifications: • 2+ years' experience on a CNC Mill or a 2-year degree in CNC Machining • Strong basic math skills to include shop math and trigonometry • 4+ years' experience on a CNC Mill • Some knowledge of G&M codes • Capable of lifting 50lbs regularly • Other duties as required Benefits: • 4-day work week, every week • IRA percentage match • PTO • Holidays • Catered lunches • Great coworkers • High quality work you can be proud of • Work in a clean & brightly lit facility 6:00 AM - 4:15PM Monday - Thursday 40 hours per week

Job Description Mill Machinist **SIGN-ON BONUS AVAILABLE** About the Role We are seeking a detail-oriented and experienced Mill Machinist to join our team. In this role, you will be responsible for setting up and operating milling machines to produce precision parts. This is an exciting opportunity to contribute to high-quality manufacturing processes and support continuous improvement in a modern, climate-controlled facility. Key Responsibilities Set up and operate milling machines to produce precision parts Interpret technical drawings, blueprints, and CAD models to develop machining strategies Select appropriate tools, speeds, and feeds for efficient and accurate machining Collaborate with CNC programmers and engineers to troubleshoot and improve processes Maintain documentation for setups and machining operations Ensure compliance with safety and quality standards Qualifications Required: High school diploma or equivalent 3+ years of experience in milling machine operation and setup Proficiency with G-code and CAM software (e.g., Mastercam, Fusion 360) Preferred: Experience with multi-axis machining and high-precision components Familiarity with ISO quality standards and lean manufacturing principles Skills & Competencies Strong understanding of machining processes and materials Excellent problem-solving and analytical skills Attention to detail and commitment to quality Effective communication and teamwork abilities What We Offer Competitive salary Career Development and Cross-Training Opportunities Health Insurance (Medical, Dental, Vision) Simple IRA and Roth IRA options with company contributions Paid Time Off (Vacation, Sick Leave, Holidays) Paid Term Life and Long-Term Disability Insurance Modern, Climate-Controlled Facility Monday - Thursday 6:00am - 4:15pm 40 hours per week with overtime available

Job Description ENTRY LEVEL CNC MACHINIST Department: Manufacturing **SIGN-ON BONUS AVAILABLE** An Entry Level CNC Machinist at Rotary Systems will never face a boring day. You will gain experience operating 2-3 jobs per day, on one of our modern CNC Mills or Lathes utilizing Fanuc controls: Mori Seiki, OKK, Kitamura, or Kiwa. Every day you will enter a shop that is clean, climate controlled, and offering every resource necessary to help you be successful. Your work at Rotary systems will be comfortable, yet challenging. This entry level position provides a paid opportunity to obtain valuable skills and experience in a field with high demand and great earning potential. We also provide the opportunity for tuition reimbursement for technical college degree relating to Manufacturing Technologies. Responsibilities: • Operate CNC lathes and/or mills with guidance from a shop mentor • Learn to interpret machining symbols and procedures • Learn to read and interpret basic blue prints • Maintain work area and machines in safe working conditions • Participate in efforts for continuous improvement of processes Qualifications: • High degree of mechanical aptitude (are you good with your hands, mechanics, building things) • Able to lift up to 50 lbs. on a regular basis • Basic computer skills • Effective problem solving skills • Motivated - positive mental attitude and can accept constructive criticism • Ability to communicate and work with others • Adaptability - Ability to adapt to change in the workplace

Department: Machining Summary: Plans, sets up, and operates typical machine shop equipment and tools to machine raw steel and castings to print into usable parts for Demco products Sets up and operate machines to create parts to print Accurately use a full range of precision measuring and gauging tools to perform inspection before and during production Ability to identify a problem and make adjustments accordingly Keep accurate counts on parts Be self motivated to meet order deadlines Communicate with employees in the department as well as with employees in other departments Performs other duties as required Machinist description is intended to define in general terms the most significant duties of a particular position and is not all inclusive of all duties or responsibilities of individual positions. Position descriptions are not intended to exclude the possibility of temporary assignments or the alteration of existing positions. Requirements Qualifications/Experience: Team player with good interpersonal skills Detail oriented for accuracy Basic math skills for accuracy in part count Knowledge of speeds and feeds rates Knowledge of the trade Degree in Machining or experience preferred Physical Job Demands: Ability to lift 50 pounds occasionally and push/pull 100 pounds occasionally Bending from the waist - 40% of the time Lifting from waist level - 5 to 50lb requirement Above shoulder reach - Minimal Pinch/grip - 100% of the time Twisting - Minimal Standing - 100% of the time This position requires use of heavy equipment and an overhead crane.

KMM Group offers rewarding opportunities to propel the world forward through mission critical components for air, space, life-saving equipment and more. You don't want to miss out on this opportunity! A few of our Company Culture Fundamentals: Paid to Think Make it Fun Choose Positive Support Each Other Strive for Excellence Inspire Passion Job requirements 5-Axis CNC Milling Machinist - Precision That Matters 📍 Hatboro, PA | Full-Time Do you take pride in mastering complex, tight-tolerance parts on a 5-axis mill? At KMM Group, Ltd., we craft mission-critical components that fuel life-saving medical devices and cutting-edge aerospace systems. We're searching for an elite 5-Axis CNC Milling Setup/Operator who thrives on craftsmanship, continuous improvement, and precision that makes an impact. 🔧 What You'll Do: Set up and operate advanced 5-axis CNC milling machines (such as DMU, DMC, or similar platforms). Read and interpret complex blueprints with GD&T to plan, set up, and machine high-precision parts. Modify and optimize programs (Fanuc & Siemens preferred) for top performance. Perform detailed inspections and in-process verifications to ensure specs are met. Collaborate with engineering and quality to troubleshoot and improve processes. ✅ What You Bring: 5+ years of 5-axis CNC milling experience in a high-precision environment…. Deep knowledge of high-performance materials (Stainless, Inconel, Titanium, etc.). Strong understanding of tool selection, speeds & feeds, and fixture design. Experience working within ISO 13485 or AS9100 environments. Experience working with GD&T, feature control frames like true position, parallelism, flatness, concentricity, and profile of a surface. 🚀 Why Join KMM Group? Mission-Driven Work - Your precision has purpose Culture of Innovation - “Paid to Think,” “Make it Fun,” and “Strive for Excellence” aren't just phrases-they're how we operate Career Growth - We support and challenge you to keep advancing Top-Tier Compensation & Benefits - Because your expertise deserves it 🎯 Apply now and take your 5-axis machining skills to the next level. At KMM, your craftsmanship builds a better, safer world. 🛡️Benefits & Perks Offered: Healthcare: Medical, Prescriptions, Dental Vision Insurance Life & Disability Insurance Supplemental: Health Insurances (Hospital Indemnity, Critical Illness Care, etc. - Paid by Employee) Total Wellbeing Programs & Mobile Mental Health Hub Financial Academy Paid Holidays and PTO 401k Plan w/Employer Match Employee Assistance Program (EAP) Professional Development Programs, Education Dedicated Manager of Training Dedicated HR staff to support your needs Benefits related Employee Advocacy Team ***All benefits listed herein are for information purposes and subject to change. NOTE: KMM is an ITAR Registered Facility and thus anyone applying for this role must be a US Citizen or have a valid Green Card. ***Offered Compensation is commensurate with experience. All done! Your application has been successfully submitted! Other jobs

Industrial pump reengineering company We have a fantastic full-time career opportunity for a qualified Manual Machinist to work in Aston, PA. An excellent compensation and benefits package is available for a qualified candidate. The Manual Machinist is responsible for the operation of large industrial machines while making various pump parts to precise specifications. You will use knowledge of metal properties, setups, layouts, and precision machining procedures to develop and maintain these parts. The successful candidate will be familiar with machining equipment such as a manual lathe machine. Job Responsibilities and Qualifications: ? Performing layouts, setting up and operating conventional machine tools such as ID / OD Grinders, Turret Lathes, Engine Lathes, a Horizontal Boring Mill, a Vertical Boring Mill, a Radial Drill, and a Planer Mill. ? Reading and understanding drawings, including geometric dimensioning and tolerancing ? Must be able to hold very close tolerances (+/- 0.001"). ? Can inspect parts using all micrometers for checking diameters, lengths and depths, and grooves, slots, and drill dimensions ? Experienced in machining pump components such as cases, impellers, wear-rings, bearing housings, and shafts. ? Follows instructions from a traveler/router and machining procedures to perform the machining process. ? Attention to detail with a results-driven background ? Excellent communication skills ? Willing to work overtime as required ? Journeyman machinist or 5-10 years of experience / or comparable experience within the aftermarket pump or rotating equipment industry preferred. ? High school diploma or equivalent ? Must be able to pass pre-employment Drug & Alcohol Testing Great team and work environment + Health Insurance + Paid Accrued Vacation + (9) Paid Holidays + 401(K) matching + Life Insurance + Overtime (as determined by facility workload/schedules) Salary: Based on Experience Join us! Ref: #553-Joule Industrial System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.