Numerical Control Operator jobs at Wabtec Corporation

Full-time Description Shift: 3:00 PM to 1:30 AM / Monday to Thursday (Fridays off) 5% shift differential Sets up and operates numerically controlled horizontal/vertical lathe/mill to perform machining operations (turning, boring, facing, threading) using castings, billet, and bar stock. Reads process sheets/work instructions and blueprints to determine machining to be performed. Essential Functions Sets up, programs, and operates equipment as directed. Completes customer product requirements as associated with work orders. Determines appropriate tooling/gages for part production/inspection. Performs in-process inspections as required to ensure 100% quality product. Identifies discrepancies in estimated setup and run times and resolves with supervisor. Responsible for document and data control of programs, tool lists, and other related data with respect to job packets/travelers. Responsible for cleaning and performing general maintenance on equipment as scheduled or required. Responsible for maintaining a clean, organized work area in accordance with Company programs, policies, and procedures. Responsible for stopping production if a part or process problem is identified and notifying supervisor or Quality personnel. Initiates nonconforming product procedures when necessary. Responsible for mentoring and/or training of other personnel as assigned. Responsible for identification and elimination of any unnecessary waste. Responsible to ensure production time and quantities are accurately clocked to jobs, together with shift clock in and clock out times for payroll purposes. Responsible to review Daily Labor Reports for accuracy. Participates in corrective and preventative activities as required. Provides assistance to other Departments as necessary or required. Remains productive by seeking out tasks and assisting others when slow or idle. Participates in and supports the Company Quality System and all Environmental, Health, and Safety policies. Responsible to participate in continuous improvement and associated training. Responsible to adhere to the Company Quality Policy and to understand and follow all applicable Quality Work Instructions, Policies, and Procedures. Responsible to understand and adhere to all applicable Company Work Instructions, Policies, and Procedures. Performs other duties as assigned. This posting will close on 11/15/24 Requirements Education/Skills/Abilities High school diploma or G.E.D. Prefer at least 1 year of machining experience General programming skills. Basic shop math (addition, subtraction, trigonometry) . Blueprint reading and GD&T skills. Ability to perform part inspection using inspection equipment. Good understanding of gage calibration. Ability to perform own set-ups helpful. Basic understanding of Quality Systems. Technical trade certification or related experience. Solid communication and teamwork skills. A team player, willing to take on extra tasks as necessary and create/maintain healthy working relationships. Physical Demands & Work Environment Working conditions are normal for both the office and manufacturing environment. While performing duties of this position, the employee is frequently required to stand (for moderate to long periods of time), walk, use hands to finger/handle/feel objects, and reach with hands and arms. Other frequent activities include, but are not limited to, push/pull of objects, bending, climbing, balancing, stooping, and twisting (torso). Work may involve lifting of materials and products up to 50 pounds. Working in the manufacturing environment requires the use of safety equipment to include, but not limited to safety glasses, safety shoes/boots, and gloves. Loose fitting clothes and jewelry are not permitted. Long hair is required to be tied back. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This Job Description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee holding this position. Duties, responsibilities, and activities may change at any time with or without notice Salary Description $20-$40 hour

Job DescriptionSalary: DOE The Machine Operator/Warehouse Associate is responsible for the safe and efficient manufacturing of Misc. Metal goods utilizing multiple pieces of equipment. The Machine Operator is expected to produce quoted amounts of material as directed by the Plant Manager while putting safety, and quality at the highest regard. Core expectations: Exceed customer expectations by ensuring all quality standards are met, in accuracy, quality and timeliness. Operating various roll forming and CNC fabrication equipment in a safe and expeditious manner. Such As Plasma Table, Tube Plasma, Auto Saws. After certification, operates a forklift to load, unload and relocate materials and goods. Ensures a clean work environment by preventing clutter and debris by implementing 6S. Communicate clearly with supervisors and other team members. Continuously works to improve operations, decreases turnaround times, streamlines work processes, and works cooperatively and jointly to meet company and customer needs. Ensure that delivery tickets/packing lists are properly noted and turned in. Assisting maintenance of roll forming and break forming equipment Promotes a safe working environment and creates and enforces a safety culture to ensure that all he complies with plant and company safety procedures and policies. Possesses excellent listening and communication skills.

Manufacturing organization in Littlestown, PA is looking for a skilled and detail-oriented CNC Mill and Lathe Operator/Programmer to join its machining team. This role offers the opportunity to work with advanced CNC machines, including lathes, horizontal and vertical mills, and 5-axis mills, to produce high-quality components. The ideal candidate has a strong understanding of machining principles, excellent problem-solving skills, and a commitment to safety and precision. The CNC Mill and Lathe Operator/Programmer is responsible for setting up, operating, and programming CNC milling machines to produce precision components according to engineering drawings and specifications. This role requires a strong understanding of machining processes, programming using Mastercam software, and adherence to quality control standards. KEY RESPONSIBILITIES: Machine Setup & Operation Set up CNC milling machines (3-axis, 4-axis, or 5-axis) for production runs. Load tools, fixtures, and raw materials. Monitor machine operations and make adjustments as needed. Programming Create, edit, and optimize CNC programs using G-code or CAM software (e.g., Mastercam). Interpret technical drawings, blueprints, and CAD models. Select appropriate cutting tools, speeds, and feeds. Quality Assurance Inspect finished parts using calipers, micrometers, and CMMs. Ensure parts meet tight tolerances and surface finish requirements. Calibrate and maintain personal tools. Document inspection results and maintain quality records. Maintenance & Safety Perform routine maintenance on machines and tooling. Follow all safety protocols and maintain a clean, organized work environment. REQUIRED SKILLS & QUALIFICATIONS: Proven experience operating and programming CNC milling machines. Proficiency in reading blueprints and technical drawings. Strong knowledge of G-code and CAM software. Familiarity with machining various materials (aluminum, steel, plastics, etc.). Ability to use precision measuring tools. High attention to detail and problem-solving skills. Effective communication with co-workers and supervisors to coordinate activities. EDUCATION & EXPERIENCE: High school diploma or equivalent (technical school preferred). 2+ years of experience in CNC machining and programming. Mastercam training required. Certification in CNC machining or manufacturing technology is a plus

AMG, Inc., is an employee-owned company that was founded in 1977. We are a precision manufacturing company specializing in high-quality machining, fabrication, and assembly for a variety of industries. We take pride in our skilled workforce and our commitment to safety, quality, and continuous improvement. AMG, Inc. is seeking a skilled TRAK Lathe Operator to join our 1st shift machining team at our Cohen Place location. This role is responsible for setting up and operating TRAK lathes to machine precision components according to engineering drawings, specifications, and production standards. Key Responsibilities * Set up and operate TRAK CNC lathes to produce high-quality machined parts. * Read and interpret blueprints, shop drawings, and work instructions. * Select and install tooling, adjust offsets, and verify machine parameters. * Measure finished parts using micrometers, calipers, and other precision instruments. * Perform basic program edits and adjustments as required. * Monitor equipment and report mechanical or quality issues promptly. * Maintain accurate production documentation and adhere to quality standards. * Keep work area clean and follow all company safety policies. Qualifications & Skills * Minimum 3 years of machining experience, preferably with TRAK equipment. * Strong ability to read blueprints and interpret machining tolerances. * Familiarity with CNC controls and basic G-code adjustments. * Excellent mechanical aptitude and attention to detail. * Ability to lift up to 50 lbs and stand for extended periods. * Strong work ethic, reliability, and commitment to quality. Preferred Qualifications * Experience machining in a job-shop or custom manufacturing environment. * Knowledge of cutting speeds, feeds, and tooling selection. * Problem-solving and troubleshooting skills. * Must be at least 18 years of age and a U.S. Citizen. AMG, Inc. supports diversity and is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, gender, national origin, citizenship, age, disability or veteran status. ***************************************************************** ************************************************************************************************

Job Description Lathe Machinist **SIGN-ON BONUS AVAILABLE** About the Role We are seeking a detail-oriented and experienced Lathe Machinist to join our team. In this role, you will be responsible for setting up and operating lathe machines to produce precision components. This is an exciting opportunity to contribute to high-quality manufacturing processes and support continuous improvement in a modern, climate-controlled facility. Key Responsibilities Set up and operate lathe machines to produce precision components Interpret technical drawings, blueprints, and CAD models to develop machining strategies Select appropriate tools, speeds, and feeds for efficient and accurate machining Inspect finished products to ensure they meet quality standards Collaborate with CNC programmers and engineers to troubleshoot and improve processes Maintain documentation for setups and operations Ensure compliance with safety and quality standards Qualifications Required: High school diploma or equivalent 3+ years of experience in lathe machining and setup Proficiency with manual and CNC lathe machines Preferred: Experience with precision components and tight tolerances Familiarity with ISO quality standards and lean manufacturing principles Skills & Competencies Strong understanding of machining processes and materials Excellent problem-solving and analytical skills Attention to detail and commitment to quality Effective communication and teamwork abilities What We Offer Competitive salary Career Development and Cross-Training Opportunities Health Insurance (Medical, Dental, Vision) Simple IRA and Roth IRA options with company contributions Paid Time Off (Vacation, Sick Leave, Holidays) Paid Term Life and Long-Term Disability Insurance Modern, Climate-Controlled Facility Monday - Thursday 6:00am - 4:15pm 40 hours per week with overtime available

AMG, Inc., is an employee-owned company that was founded in 1977. We are a precision manufacturing company specializing in high-quality machining, fabrication, and assembly for a variety of industries. We take pride in our skilled workforce and our commitment to safety, quality, and continuous improvement. AMG, Inc. is seeking an experienced CNC Mill Machinist to join our 1st shift machining team at our Jefferson Ridge Parkway location. This role is responsible for setting up, operating, and inspecting CNC milling equipment to produce precision parts that meet engineering specifications and quality standards. Key Responsibilities * Set up and operate CNC milling machines to produce high-quality machined components. * Read and interpret blueprints, engineering drawings, and work instructions. * Select, install, and adjust tooling, fixtures, and machine offsets as needed. * Perform in-process inspection using micrometers, calipers, height gauges, and other precision measuring tools. * Make basic program edits or adjustments to ensure part accuracy. * Troubleshoot machining issues and maintain consistent part quality. * Document production activities in accordance with company standards. * Maintain a safe, organized, and clean work area, following all safety protocols. Qualifications & Skills * Minimum 3 years of CNC milling experience in a manufacturing or job-shop environment. * Strong blueprint reading skills and understanding of GD&T. * Proficiency with CNC controls (Fanuc, Haas, or similar). * Knowledge of cutting tools, speeds, feeds, and machining best practices. * Ability to lift up to 50 lbs and stand for extended periods. * Strong attention to detail, reliability, and commitment to producing quality parts. Preferred Qualifications * Experience with multi-axis milling equipment. * Ability to program or modify CNC programs (CAM or at the machine). * Familiarity with lean manufacturing concepts. * Must be 18 years of age and a U. S. Citizen. AMG, Inc. supports diversity and is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, gender, national origin, citizenship, age, disability or veteran status. ***************************************************************** ************************************************************************************************

Job Title: CNC Machinist Type: Direct Hire Compensation: $62400 annually Contractor Work Model: Onsite Hours: 2 nd shift is 3:00 pm-1:30 am Monday- Thursday Security Clearance: List security clearance requirements (delete if not needed) Responsibilities + Configure and operate computer numerical control equipment for various machining operations including turning, drilling, and milling processes + Interpret engineering drawings, blueprints, and technical specifications to produce components within required tolerances + Perform dimensional inspections and quality assurance using precision measurement instruments + Execute setup procedures for multi-axis turning centers and maintain optimal machine performance + Troubleshoot equipment malfunctions and perform routine maintenance tasks + Monitor production processes to ensure adherence to quality standards and delivery schedules Requirements + Demonstrated experience in CNC machining operations and programming + Proficiency in reading and understanding technical documentation and engineering drawings + Competency with precision measuring equipment and dimensional inspection techniques + Strong mathematical skills for performing calculations related to machining parameters + Technical aptitude for diagnosing and resolving mechanical issues + Experience with multi-axis lathe operations preferred + Ability to work effectively in a fast-paced manufacturing setting Compensation & Benefits Package Full-Time Position Financial Benefits: + Competitive base salary with overtime opportunities + Annual performance bonus + 401(k) retirement plan with 6% company matching contribution + Shift differential compensation + Double-time pay for extended hours + Overtime premium pay rates Health & Wellness: + Comprehensive medical insurance coverage + Dental insurance plan + Vision insurance benefits + Health Savings Account (HSA) options + Life insurance coverage + Employee Assistance Program Professional Development: + Paid time off policy + Professional development financial assistance + Tuition reimbursement program + Employee discount programs Work Schedule: + 10-hour shift structure + Evening shift timing + Regular overtime availability System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #282-Eng Pgh System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Job Description ENTRY LEVEL CNC MACHINIST Department: Manufacturing **SIGN-ON BONUS AVAILABLE** An Entry Level CNC Machinist at Rotary Systems will never face a boring day. You will gain experience operating 2-3 jobs per day, on one of our modern CNC Mills or Lathes utilizing Fanuc controls: Mori Seiki, OKK, Kitamura, or Kiwa. Every day you will enter a shop that is clean, climate controlled, and offering every resource necessary to help you be successful. Your work at Rotary systems will be comfortable, yet challenging. This entry level position provides a paid opportunity to obtain valuable skills and experience in a field with high demand and great earning potential. We also provide the opportunity for tuition reimbursement for technical college degree relating to Manufacturing Technologies. Responsibilities: • Operate CNC lathes and/or mills with guidance from a shop mentor • Learn to interpret machining symbols and procedures • Learn to read and interpret basic blue prints • Maintain work area and machines in safe working conditions • Participate in efforts for continuous improvement of processes Qualifications: • High degree of mechanical aptitude (are you good with your hands, mechanics, building things) • Able to lift up to 50 lbs. on a regular basis • Basic computer skills • Effective problem solving skills • Motivated - positive mental attitude and can accept constructive criticism • Ability to communicate and work with others • Adaptability - Ability to adapt to change in the workplace

Job Description Mill Machinist **SIGN-ON BONUS AVAILABLE** About the Role We are seeking a detail-oriented and experienced Mill Machinist to join our team. In this role, you will be responsible for setting up and operating milling machines to produce precision parts. This is an exciting opportunity to contribute to high-quality manufacturing processes and support continuous improvement in a modern, climate-controlled facility. Key Responsibilities Set up and operate milling machines to produce precision parts Interpret technical drawings, blueprints, and CAD models to develop machining strategies Select appropriate tools, speeds, and feeds for efficient and accurate machining Collaborate with CNC programmers and engineers to troubleshoot and improve processes Maintain documentation for setups and machining operations Ensure compliance with safety and quality standards Qualifications Required: High school diploma or equivalent 3+ years of experience in milling machine operation and setup Proficiency with G-code and CAM software (e.g., Mastercam, Fusion 360) Preferred: Experience with multi-axis machining and high-precision components Familiarity with ISO quality standards and lean manufacturing principles Skills & Competencies Strong understanding of machining processes and materials Excellent problem-solving and analytical skills Attention to detail and commitment to quality Effective communication and teamwork abilities What We Offer Competitive salary Career Development and Cross-Training Opportunities Health Insurance (Medical, Dental, Vision) Simple IRA and Roth IRA options with company contributions Paid Time Off (Vacation, Sick Leave, Holidays) Paid Term Life and Long-Term Disability Insurance Modern, Climate-Controlled Facility Monday - Thursday 6:00am - 4:15pm 40 hours per week with overtime available

Job Title: CNC Machinist Type: Direct Hire Contractor Work Model: Onsite Hours: + 1st shift (1 opening): 6:30am-3pm Mon-Fri + 2nd shift (2 openings): 3pm-1:30am Mon-Thur + 3rd shift (1 opening): 8pm-6:30am Mon-Thur + Weekend (3 openings): 6:30am-7pm Fri-Sun Candidate must have a minimum of 2 years of CNC experience and expert in precision machining. Machinist I / II Basic Purpose and Objective of the Position: The Machinist is responsible for machine setup, operation, and troubleshooting to ensure all parts meet required specifications and tolerances. This role performs advanced machining functions, leads process improvements, and mentors lower-level machinists and operators. The Machinist collaborates closely with Quality and Engineering teams to drive efficiency, precision, and continuous improvement in all manufacturing processes. Major Responsibilities Primary Operations: + Set up and troubleshoot a variety of precision machining processes, including: + Cylindrical Grinding + Wire EDM (WEDM) + Surface Grinding Additional Desired Operations: + Core Drill + CNC Slice + SPLAP + Centerless Grind + MWS Key Duties: + Perform advanced machine setup and process troubleshooting to achieve and maintain tolerances below .0005". + Collaborate with Quality and Engineering teams to identify and resolve mechanical, process, and quality issues. + Conduct root cause analyses and recommend corrective or preventive actions. + Document and refine setup procedures and standard work instructions for improved efficiency. + Train and mentor Machinist I and Operator-level employees, fostering skill development and adherence to best practices. + Assist with machine repair and preventive maintenance activities. + Maintain compliance with all safety, quality, and production standards. + Execute autonomous maintenance schedules and support continuous improvement initiatives. Qualifications + High school diploma or equivalent. + 1-2 years of machining experience (Machinist I) or 2+ years for advanced level (Machinist II). + Expert knowledge of precision machining with proven ability to hold tolerances below .0005". + Strong mechanical aptitude and analytical problem-solving skills. + Proficient in reading blueprints and interpreting GD&T. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #706-IT York System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **LEVEL 4 CNC MACHINIST TECHNICIAN - Multiple Positions Available - 2nd & 3rd Shift** **$2500 Sign On Bonus $29.40/hour starting pay + 6 % Shift Differential** **Location: Lafayette, Indiana** Medical/Dental/Vision/Life Insurance, Incentives/Bonus Opportunities, Matching 401k available day one. *************************** : Apply online and create a candidate account. **CATERPILLAR - BUILD WHAT MATTERS** What matters most to you? Is it being part of a strong team? Supporting your family? Solving global problems? You can do these and more at Caterpillar; where your work enables progress around the globe, and you contribute to meaningful work. Together, we can build what matters! This position description is for **Level 4 CNC Machinist** within the Large Power Systems Division located in our Lafayette, IN facility. Candidates must have a strong background with experience in boring milling, drilling and reaming. Must have knowledge of CNC programs and be able to make offset adjustments as required. **Actual shift availability varies week by week and successful candidates will be started as soon as a position becomes available on their requested shift. Please note that this could mean a sizable waiting period before starting.** **Job Duties/Responsibilities may include, but are not limited to:** + Responsible for production, quality, housekeeping and other related duties associated with the operation and set up of CNC and NC controlled machines, transport material, audit, operate wash tanks and operate some manual operations. + Interpret CNC programs Job Instruction Sheet, CMM data, Gageit (gage tracking) and accountable for processes by monitoring Infinity. + At times may be required to work overtime to support the manufacturing requirements. + Must have the ability to trouble shoot and solve problems dealing with machine, tooling, and program malfunction and solve everyday problems. + Must be able to manage time and work well in a team environment. **Basic Qualifications:** + Two or more years of experience in a manufacturing environment: multi-axis CNC machining experience, ability to program CNC machines with Fanuc, Siemens or other controllers. + Strong working knowledge of machining principles; basic SPC, blueprint reading; understanding of geometric tolerances; ability to interpret CMM reports; quality data; and work experience in a lean manufacturing environment. + Must pass CNC skills assessment in order to win position + Required to stay in section for 12 months except for a promotion or nights to days move **Physical Requirements:** + Candidates for all positions must have the ability to work in a fast pace, medium to heavy duty assembly, technical environment. + Work may involve frequent bending, stooping, and kneeling, twisting, turning, climbing, and standing on concrete for 8+ hours. + All positions also require the ability to lift **_40 pounds_** and withstand frequent repetitive movement of hands with a variety of tooling. + Some positions require the ability to perform tasks on a moving conveyor under time constraints + Some positions require the ability to climb ladders, stairs, work on platforms and work at heights + Some positions require the ability to work in confined spaces + Some positions require the ability to wear a respirator + Must be able to lift and manipulate engine components during the assembly process + Must be able to use hand and pneumatic tools as well as automatic torque equipment **Additional Information:** + Location of this position is in Lafayette, IN + Shift: **2nd Shift (3:30pm-11:30pm) & 3rd Shift (11:30pm-7:30am)** + Will train on **(1st shift 7:30am-3:30pm)** anywhere from 3 weeks to 3 months + Please Attach an Updated Resume + **Relocation assistance is available to eligible candidates** + 40-hour work weeks with potential for Overtime + 144 hours of paid Personal Time Off (PTO) - (Prorated based upon start date) + 11 Paid holidays + Climate controlled work environment - most areas + Clean/safe work environment **_Please ensure you frequently check the e-mail account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process._** **\#LI** **Summary Pay Range:** $29.40 - $37.40 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees **Posting Dates:** October 8, 2025 - January 6, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **LEVEL 4 CNC MACHINIST TECHNICIAN - Multiple Positions Available - 2nd & 3rd Shift** **$2500 Sign On Bonus $29.40/hour starting pay + 6 % Shift Differential** **Location: Lafayette, Indiana** Medical/Dental/Vision/Life Insurance, Incentives/Bonus Opportunities, Matching 401k available day one. *************************** : Apply online and create a candidate account. **CATERPILLAR - BUILD WHAT MATTERS** What matters most to you? Is it being part of a strong team? Supporting your family? Solving global problems? You can do these and more at Caterpillar; where your work enables progress around the globe, and you contribute to meaningful work. Together, we can build what matters! This position description is for **Level 4 CNC Machinist** within the Large Power Systems Division located in our Lafayette, IN facility. Candidates must have a strong background with experience in boring milling, drilling and reaming. Must have knowledge of CNC programs and be able to make offset adjustments as required. **Actual shift availability varies week by week and successful candidates will be started as soon as a position becomes available on their requested shift. Please note that this could mean a sizable waiting period before starting.** **Job Duties/Responsibilities may include, but are not limited to:** + Responsible for production, quality, housekeeping and other related duties associated with the operation and set up of CNC and NC controlled machines, transport material, audit, operate wash tanks and operate some manual operations. + Interpret CNC programs Job Instruction Sheet, CMM data, Gageit (gage tracking) and accountable for processes by monitoring Infinity. + At times may be required to work overtime to support the manufacturing requirements. + Must have the ability to trouble shoot and solve problems dealing with machine, tooling, and program malfunction and solve everyday problems. + Must be able to manage time and work well in a team environment. **Basic Qualifications:** + Two or more years of experience in a manufacturing environment: multi-axis CNC machining experience, ability to program CNC machines with Fanuc, Siemens or other controllers. + Strong working knowledge of machining principles; basic SPC, blueprint reading; understanding of geometric tolerances; ability to interpret CMM reports; quality data; and work experience in a lean manufacturing environment. + Must pass CNC skills assessment in order to win position + Required to stay in section for 12 months except for a promotion or nights to days move **Physical Requirements:** + Candidates for all positions must have the ability to work in a fast pace, medium to heavy duty assembly, technical environment. + Work may involve frequent bending, stooping, and kneeling, twisting, turning, climbing, and standing on concrete for 8+ hours. + All positions also require the ability to lift **_40 pounds_** and withstand frequent repetitive movement of hands with a variety of tooling. + Some positions require the ability to perform tasks on a moving conveyor under time constraints + Some positions require the ability to climb ladders, stairs, work on platforms and work at heights + Some positions require the ability to work in confined spaces + Some positions require the ability to wear a respirator + Must be able to lift and manipulate engine components during the assembly process + Must be able to use hand and pneumatic tools as well as automatic torque equipment **Additional Information:** + Location of this position is in Lafayette, IN + Shift: **2nd Shift (3:30pm-11:30pm) & 3rd Shift (11:30pm-7:30am)** + Will train on **(1st shift 7:30am-3:30pm)** anywhere from 3 weeks to 3 months + Please Attach an Updated Resume + **Relocation assistance is available to eligible candidates** + 40-hour work weeks with potential for Overtime + 144 hours of paid Personal Time Off (PTO) - (Prorated based upon start date) + 11 Paid holidays + Climate controlled work environment - most areas + Clean/safe work environment **_Please ensure you frequently check the e-mail account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process._** **\#LI** **Summary Pay Range:** $29.40 - $37.40 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees **Posting Dates:** October 8, 2025 - January 6, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **LEVEL 4 CNC MACHINIST TECHNICIAN - Multiple Positions Available - 2nd & 3rd Shift** **$2500 Sign On Bonus $29.40/hour starting pay + 6 % Shift Differential** **Location: Lafayette, Indiana** Medical/Dental/Vision/Life Insurance, Incentives/Bonus Opportunities, Matching 401k available day one. *************************** : Apply online and create a candidate account. **CATERPILLAR - BUILD WHAT MATTERS** What matters most to you? Is it being part of a strong team? Supporting your family? Solving global problems? You can do these and more at Caterpillar; where your work enables progress around the globe, and you contribute to meaningful work. Together, we can build what matters! This position description is for **Level 4 CNC Machinist** within the Large Power Systems Division located in our Lafayette, IN facility. Candidates must have a strong background with experience in boring milling, drilling and reaming. Must have knowledge of CNC programs and be able to make offset adjustments as required. **Actual shift availability varies week by week and successful candidates will be started as soon as a position becomes available on their requested shift. Please note that this could mean a sizable waiting period before starting.** **Job Duties/Responsibilities may include, but are not limited to:** + Responsible for production, quality, housekeeping and other related duties associated with the operation and set up of CNC and NC controlled machines, transport material, audit, operate wash tanks and operate some manual operations. + Interpret CNC programs Job Instruction Sheet, CMM data, Gageit (gage tracking) and accountable for processes by monitoring Infinity. + At times may be required to work overtime to support the manufacturing requirements. + Must have the ability to trouble shoot and solve problems dealing with machine, tooling, and program malfunction and solve everyday problems. + Must be able to manage time and work well in a team environment. **Basic Qualifications:** + Two or more years of experience in a manufacturing environment: multi-axis CNC machining experience, ability to program CNC machines with Fanuc, Siemens or other controllers. + Strong working knowledge of machining principles; basic SPC, blueprint reading; understanding of geometric tolerances; ability to interpret CMM reports; quality data; and work experience in a lean manufacturing environment. + Must pass CNC skills assessment in order to win position + Required to stay in section for 12 months except for a promotion or nights to days move **Physical Requirements:** + Candidates for all positions must have the ability to work in a fast pace, medium to heavy duty assembly, technical environment. + Work may involve frequent bending, stooping, and kneeling, twisting, turning, climbing, and standing on concrete for 8+ hours. + All positions also require the ability to lift **_40 pounds_** and withstand frequent repetitive movement of hands with a variety of tooling. + Some positions require the ability to perform tasks on a moving conveyor under time constraints + Some positions require the ability to climb ladders, stairs, work on platforms and work at heights + Some positions require the ability to work in confined spaces + Some positions require the ability to wear a respirator + Must be able to lift and manipulate engine components during the assembly process + Must be able to use hand and pneumatic tools as well as automatic torque equipment **Additional Information:** + Location of this position is in Lafayette, IN + Shift: **2nd Shift (3:30pm-11:30pm) & 3rd Shift (11:30pm-7:30am)** + Will train on **(1st shift 7:30am-3:30pm)** anywhere from 3 weeks to 3 months + Please Attach an Updated Resume + **Relocation assistance is available to eligible candidates** + 40-hour work weeks with potential for Overtime + 144 hours of paid Personal Time Off (PTO) - (Prorated based upon start date) + 11 Paid holidays + Climate controlled work environment - most areas + Clean/safe work environment **_Please ensure you frequently check the e-mail account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process._** **\#LI** **Summary Pay Range:** $29.40 - $37.40 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees **Posting Dates:** October 8, 2025 - January 6, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **LEVEL 4 CNC MACHINIST TECHNICIAN - Multiple Positions Available - 2nd & 3rd Shift** **$2500 Sign On Bonus $29.40/hour starting pay + 6 % Shift Differential** **Location: Lafayette, Indiana** Medical/Dental/Vision/Life Insurance, Incentives/Bonus Opportunities, Matching 401k available day one. *************************** : Apply online and create a candidate account. **CATERPILLAR - BUILD WHAT MATTERS** What matters most to you? Is it being part of a strong team? Supporting your family? Solving global problems? You can do these and more at Caterpillar; where your work enables progress around the globe, and you contribute to meaningful work. Together, we can build what matters! This position description is for **Level 4 CNC Machinist** within the Large Power Systems Division located in our Lafayette, IN facility. Candidates must have a strong background with experience in boring milling, drilling and reaming. Must have knowledge of CNC programs and be able to make offset adjustments as required. **Actual shift availability varies week by week and successful candidates will be started as soon as a position becomes available on their requested shift. Please note that this could mean a sizable waiting period before starting.** **Job Duties/Responsibilities may include, but are not limited to:** + Responsible for production, quality, housekeeping and other related duties associated with the operation and set up of CNC and NC controlled machines, transport material, audit, operate wash tanks and operate some manual operations. + Interpret CNC programs Job Instruction Sheet, CMM data, Gageit (gage tracking) and accountable for processes by monitoring Infinity. + At times may be required to work overtime to support the manufacturing requirements. + Must have the ability to trouble shoot and solve problems dealing with machine, tooling, and program malfunction and solve everyday problems. + Must be able to manage time and work well in a team environment. **Basic Qualifications:** + Two or more years of experience in a manufacturing environment: multi-axis CNC machining experience, ability to program CNC machines with Fanuc, Siemens or other controllers. + Strong working knowledge of machining principles; basic SPC, blueprint reading; understanding of geometric tolerances; ability to interpret CMM reports; quality data; and work experience in a lean manufacturing environment. + Must pass CNC skills assessment in order to win position + Required to stay in section for 12 months except for a promotion or nights to days move **Physical Requirements:** + Candidates for all positions must have the ability to work in a fast pace, medium to heavy duty assembly, technical environment. + Work may involve frequent bending, stooping, and kneeling, twisting, turning, climbing, and standing on concrete for 8+ hours. + All positions also require the ability to lift **_40 pounds_** and withstand frequent repetitive movement of hands with a variety of tooling. + Some positions require the ability to perform tasks on a moving conveyor under time constraints + Some positions require the ability to climb ladders, stairs, work on platforms and work at heights + Some positions require the ability to work in confined spaces + Some positions require the ability to wear a respirator + Must be able to lift and manipulate engine components during the assembly process + Must be able to use hand and pneumatic tools as well as automatic torque equipment **Additional Information:** + Location of this position is in Lafayette, IN + Shift: **2nd Shift (3:30pm-11:30pm) & 3rd Shift (11:30pm-7:30am)** + Will train on **(1st shift 7:30am-3:30pm)** anywhere from 3 weeks to 3 months + Please Attach an Updated Resume + **Relocation assistance is available to eligible candidates** + 40-hour work weeks with potential for Overtime + 144 hours of paid Personal Time Off (PTO) - (Prorated based upon start date) + 11 Paid holidays + Climate controlled work environment - most areas + Clean/safe work environment **_Please ensure you frequently check the e-mail account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process._** **\#LI** **Summary Pay Range:** $29.40 - $37.40 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. **Benefits:** Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. + Medical, dental, and vision benefits* + Paid time off plan (Vacation, Holidays, Volunteer, etc.)* + 401(k) savings plans* + Health Savings Account (HSA)* + Flexible Spending Accounts (FSAs)* + Health Lifestyle Programs* + Employee Assistance Program* + Voluntary Benefits and Employee Discounts* + Career Development* + Incentive bonus* + Disability benefits + Life Insurance + Parental leave + Adoption benefits + Tuition Reimbursement * These benefits also apply to part-time employees **Posting Dates:** October 8, 2025 - January 6, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. LEVEL 4 CNC MACHINIST TECHNICIAN - Multiple Positions Available - 2nd & 3rd Shift $2500 Sign On Bonus $29.40/hour starting pay + 6 % Shift Differential Location: Lafayette, Indiana Medical/Dental/Vision/Life Insurance, Incentives/Bonus Opportunities, Matching 401k available day one. *************************** : Apply online and create a candidate account. CATERPILLAR - BUILD WHAT MATTERS What matters most to you? Is it being part of a strong team? Supporting your family? Solving global problems? You can do these and more at Caterpillar; where your work enables progress around the globe, and you contribute to meaningful work. Together, we can build what matters! This position description is for Level 4 CNC Machinist within the Large Power Systems Division located in our Lafayette, IN facility. Candidates must have a strong background with experience in boring milling, drilling and reaming. Must have knowledge of CNC programs and be able to make offset adjustments as required. Actual shift availability varies week by week and successful candidates will be started as soon as a position becomes available on their requested shift. Please note that this could mean a sizable waiting period before starting. Job Duties/Responsibilities may include, but are not limited to: * Responsible for production, quality, housekeeping and other related duties associated with the operation and set up of CNC and NC controlled machines, transport material, audit, operate wash tanks and operate some manual operations. * Interpret CNC programs Job Instruction Sheet, CMM data, Gageit (gage tracking) and accountable for processes by monitoring Infinity. * At times may be required to work overtime to support the manufacturing requirements. * Must have the ability to trouble shoot and solve problems dealing with machine, tooling, and program malfunction and solve everyday problems. * Must be able to manage time and work well in a team environment. Basic Qualifications: * Two or more years of experience in a manufacturing environment: multi-axis CNC machining experience, ability to program CNC machines with Fanuc, Siemens or other controllers. * Strong working knowledge of machining principles; basic SPC, blueprint reading; understanding of geometric tolerances; ability to interpret CMM reports; quality data; and work experience in a lean manufacturing environment. * Must pass CNC skills assessment in order to win position * Required to stay in section for 12 months except for a promotion or nights to days move Physical Requirements: * Candidates for all positions must have the ability to work in a fast pace, medium to heavy duty assembly, technical environment. * Work may involve frequent bending, stooping, and kneeling, twisting, turning, climbing, and standing on concrete for 8+ hours. * All positions also require the ability to lift 40 pounds and withstand frequent repetitive movement of hands with a variety of tooling. * Some positions require the ability to perform tasks on a moving conveyor under time constraints * Some positions require the ability to climb ladders, stairs, work on platforms and work at heights * Some positions require the ability to work in confined spaces * Some positions require the ability to wear a respirator * Must be able to lift and manipulate engine components during the assembly process * Must be able to use hand and pneumatic tools as well as automatic torque equipment Additional Information: * Location of this position is in Lafayette, IN * Shift: 2nd Shift (3:30pm-11:30pm) & 3rd Shift (11:30pm-7:30am) * Will train on (1st shift 7:30am-3:30pm) anywhere from 3 weeks to 3 months * Please Attach an Updated Resume * Relocation assistance is available to eligible candidates * 40-hour work weeks with potential for Overtime * 144 hours of paid Personal Time Off (PTO) - (Prorated based upon start date) * 11 Paid holidays * Climate controlled work environment - most areas * Clean/safe work environment Please ensure you frequently check the e-mail account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. #LI Summary Pay Range: $29.40 - $37.40 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: October 8, 2025 - January 6, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job Title Machinist II Agency Texas A&M Engineering Department Mechanical Engineering Proposed Minimum Salary Commensurate Job Type Staff Job Description Why work for Texas A&M Engineering? Who we are Texas A&M Engineering is a large employer in the great and growing cities of Bryan/College Station, offering thousands of career opportunities in a wide variety of fields. We are deeply committed to recruiting and retaining a talented workforce that embraces our core values of respect, excellence, leadership, loyalty, integrity, and service. Texas A&M Engineering offers competitive salaries, full benefits, an extensive support network, and above all, an enriching and highly collaborative working community that is deeply passionate about our vision for higher education, research, and public service. Purpose: The Machinist II, under general supervision serves as the lead machinist for the mechanical engineering department in the joint machine shop shared with the physics department and the mechanical engineering rapid prototyping studio. Will instruct and supervise mechanical engineering students on safe use of equipment and will provide assistance to the staff and students regarding fabrication of parts. Fabricates, maintains, and repairs metal parts, tools, and equipment. Responsibilities: Leads training sessions on manual shop equipment, CNC machines, and related software. Provides technical assistance to students, staff, and faculty. Provides instructional support to undergraduate students in the machine shop and rapid prototyping studio. Performs semi-complex jobs of a mechanical nature. Manufactures parts from steel, aluminum, or other materials from drawings, prints, or from verbal instruction to a required tolerance. Manufactures parts consisting of gears, all makes of threads, shafts, adaptors, jigs, and fixtures to very close tolerances. Manufactures, fits, and assembles parts. Orders parts for machine shop use. Provides support to laboratories and performs necessary maintenance on lab equipment. Other duties as assigned What we need: High school diploma or equivalent combination of education and experience. Five years of related experience. Knowledge, Skills and Abilities: Knowledge of word processing and spreadsheet applications. Ability to multitask and work cooperatively with others. Ability to perform mathematical computations. Ability to read engineering drawings and sketches. Work Location: Main Campus - College Station, TX. About Mechanical Engineering Mechanical Engineering at Texas A&M University is a national and international leader in mechanical engineering education. Our scholarship, research, and service to our communities are supported by recruiting and nurturing top students, faculty, and staff passionate about learning, advancing human knowledge, and making high-impact contributions to society. Texas A&M Engineering provides an outstanding benefits package including but not limited to: Competitive health benefits. Generous paid vacation, sick time, and holidays. Vision, Dental, Life, and Long-Term Disability insurance options. Teachers Retirement System of Texas (TRS), a defined benefit retirement plan with 8.25% employer contribution. Additional Voluntary Retirement Programs: Tax Deferred Account 403(b) and a Deferred Compensation Program 457(b). Flexible spending account options for medical and childcare expenses Robust free training access through LinkedIn Learning plus professional development opportunities. Tuition assistance **************************************************************************************************** Wellness program release time offered to employees to promote work/life balance. Helpful Applicant Information Required Materials for Application: Resume/CV Three work references with their contact information; at least one reference should be from a supervisor/former supervisor. Letter of interest Compensation Philosophy: Recruit and retain a high-performing workforce through competitive compensation and career development including career pathing, coaching and skills development. Recognize and reward exceptional performance based on individual and team contributions to the growth and success of Texas A&M Engineering. Offer total rewards through flexible benefits, professional development, and work-life balance. Maintain an equitable and transparent process for compensation decisions. Support, reinforce, and align compensation decisions with budgetary and financial strategies to ensure growth and sustainability. Employment Eligibility Verification If hired, you will be required to complete the federal Employment Eligibility Verification I-9 form. You will be required to present acceptable and original documents to prove your identity and authorization to work in the United States. Documents need to be presented no later than the third day of employment. Failure to do so will result in delay of start date. All positions are security-sensitive. Applicants are subject to a criminal history investigation, and employment is contingent upon the institution's verification of credentials and/or other information required by the institution's procedures, including the completion of the criminal history check. Equal Opportunity/Veterans/Disability Employer.

Job Title: Machinists Type: Direct Hire Compensation: up to $62400 annually Contractor Work Model: Onsite Hours: 1st shift is 6AM-3PM, Monday- Friday The Machinist is responsible for setting up, operating, inspecting, and programming both CNC and manual milling equipment in a precision manufacturing environment. It is a first-shift role with two openings focused on vertical CNC mills, vertical tool room equipment, and manual milling machines. Responsibilities + Set up and operate vertical CNC mills and vertical tool room machines. + Modify, troubleshoot, and prove out CNC programs. + Perform manual milling operations. + Interpret blueprints, technical drawings, and sketches to fabricate components. + Configure machinery, optimize setups, and perform quality inspections using micrometers, calipers, bore gauges, and CMMs. + Maintain safe operation of machine tools and manage routine maintenance tasks such as coolant control and chip removal. + Mentor coworkers on setup and fixturing procedures and adhere to production documentation and safety standards. + Support continuous improvement efforts and track operational performance metrics. + Rotate between machine centers as needed to meet production demands. Requirements: + Proficiency in programming codes and manual machining (saws, lathes, mills). + Experience operating manual milling machines and reading blueprints. + Competency in shop math, measurement tools, and precision inspection instruments. + Minimum of one year machinist experience or equivalent technical education. + High school diploma or GED required. Preferred Qualifications + Associate degree in machining technology. + Experience with conversational or CAM programming. #M1 Ref: #282-Eng Pgh System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

AMG, Inc., is an employee owned company that was founded in 1977. We are a precision manufacturing company specializing in high-quality machining, fabrication, and assembly for a variety of industries. We take pride in our skilled workforce and our commitment to safety, quality, and continuous improvement. We are seeking an experienced Boring Mill Operator to set up and operate a horizontal boring mill to produce precision metal parts according to specifications. The ideal candidate will have a strong mechanical aptitude, attention to detail, and the ability to work independently in a fast-paced production environment. Key Responsibilities * Set up and operate horizontal or vertical boring mills to perform precision machining operations. * Read and interpret blueprints, engineering drawings, and work orders. * Measure, inspect, and verify dimensions of finished parts to ensure accuracy. * Adjust feeds, speeds, tooling, and machine settings to achieve required tolerances. * Maintain a clean and safe work area, following company safety policies and procedures. * Perform routine machine maintenance and report any mechanical issues. * Collaborate with supervisors and team members to meet production schedules and quality standards. Qualifications * High school diploma or GED required; technical or trade school training preferred. * 3+ years of experience operating boring mills or similar machining equipment. * Strong understanding of machining principles, tooling, and metal properties. * Ability to read and interpret blueprints and precision measuring instruments (micrometers, calipers, etc.). * Demonstrated commitment to quality and attention to detail. * CNC boring mill experience a plus but not required. * Must be at least 18 years of age and a U.S. Citizen AMG, Inc. supports diversity and is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, gender, national origin, citizenship, age, disability or veteran status. ***************************************************************** ************************************************************************************************

Job Title: Machinist Type: Direct Hire Compensation: $52000 annually Contractor Work Model: Onsite Hours: 1st, 2nd, 3rd Shifts Machinist We are seeking a skilled Machinist to join our production team. The ideal candidate will have hands-on experience operating manual and CNC machine tools to produce precision parts according to customer specifications and blueprints. This role requires attention to detail, technical proficiency, and a commitment to quality craftsmanship. Responsibilities: + Set up and operate conventional and CNC machine tools including lathes, mills, grinders, and drill presses + Read and interpret technical drawings, blueprints, and specifications to determine machining operations and sequences + Select appropriate tools, materials, and machining methods for each job + Perform precision measurements using micrometers, calipers, gauges, and other measuring instruments + Monitor machining operations to ensure parts meet quality standards and tolerances + Perform routine maintenance on machines and tooling + Inspect finished parts for defects and ensure conformance to specifications + Make adjustments to machine settings as needed to maintain accuracy + Maintain a clean and safe work environment + Document production activities and maintain accurate records + Collaborate with team members and management to improve processes and efficiency Requirements: + Minimum 1 year of experience as a Machinist in a manufacturing environment + Proficiency in reading blueprints and technical drawings + Hands-on experience with manual machining equipment (lathes, mills, etc.) + Working knowledge of precision measuring instruments + Understanding of machining processes, tooling, and materials + Strong attention to detail and commitment to quality + Good mathematical and problem-solving skills + Ability to work independently and as part of a team + High school diploma or equivalent Preferred Qualifications: + Experience with CNC programming and operation + Vocational or technical training in machining + Experience in custom or job shop manufacturing + Familiarity with CAD/CAM software + Knowledge of GD&T (Geometric Dimensioning and Tolerancing) System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M-1 Ref: #282-Eng Pgh System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.