Wagner Spray Tech jobs in Albuquerque, NM - 69065 jobs

BECOME A US FOODS DRIVER! Ready to build a career with a company that's leading the foodservice industry? Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $27.90 and $30.90. As applicable, this role will also receive: overtime compensation, incentives (i.e., based on cases, mileage, stops). Schedule: 5-day work week between Monday and Saturday Start time between 3am-5am; End of shift is at completion of route 45+ hours/week Some travel may be required to domicile locations We help YOU make it! The starting pay is $27.90 per hour! Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods helps our customers Make It , with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $27.90 and $30.90.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift(s) Available: 2nd Compensation: $30.60-$41.80/h Sign-on Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information Shift Differential Weekly Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Troubleshoot mechanical and electrical issues independently Apply strong problem-solving and programming troubleshooting skills, preferably with Allen-Bradley Ensure reliability of manufacturing processes and compliance with standards Perform preventative and annual maintenance on equipment Safely operate hand tools, power tools, and electrical testing equipment Read and interpret mechanical, electrical, and control schematics Follow all safety procedures, including Lockout/Tagout (LOTO) Identify, plan, and execute follow-up maintenance work Prepare and maintain safe, organized work environments Respond to unplanned maintenance needs as directed Accurately complete and document work orders and maintenance records Communicate maintenance updates through written pass-downs Maintain and troubleshoot electronic controls and instrumentation Use diagnostic tools (e.g., oscilloscope, VOM) to test and repair systems Required Qualifications Electrical/Maintenance Journeyman License in the state of Michigan 3 years manufacturing maintenance experience Basic programming and advanced troubleshooting skills, preferably with Allen-Bradley High School or GED Equivalent Be able to troubleshoot PLCs and Ladder logic Be willing to be a part of the Hazmat team Strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, and wiring schematics Ability to work weekend and off shift hours as needed Preferred Qualifications Computer literacy and willingness to learn SAP/PPE systems Allen-Bradley programming and troubleshooting experience Maintenance experience in a food processing environment Proficient with test/calibration tools (RTD calibrators, multimeters, etc.) Ability to troubleshoot 480 VAC 3-phase, 120 VAC, and 24VDC circuits Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Values & Innovation At Under Armour, we are committed to empowering those who strive for more, and the company's values - Act Sustainably, Celebrate the Wins, Fight on Together, Love Athletes and Stand for Equality - serve as both a roadmap for our teams and the qualities expected of every teammate. Our Values define and unite us, the beliefs that are the red thread that connects everyone at Under Armour. Our values are rallying cries, reminding us why we're here, and fueling everything we do. Our pursuit of better begins with innovation and with our team's mission of being the best. With us, you get the freedom to go further - no matter your role. That means developing, delivering, and selling the state-of-the-art products and digital tools that make top performers even better. Purpose of Role Own the flow. Lead the stock room. As a Stock Keyholder, you're the go-to for keeping product moving and shelves stocked. You'll lead the charge on shipments, pricing, and stockroom standards - making sure everything's in place so customers get what they need, when they need it. Step up, take the lead, and make it happen. Your Impact We count on our Stock Keyholders to: Ensure store is fully stocked and easy to shop Implement visual merchandising standards within the store Oversee markdowns and re-ticketing, stock transfers and damaged goods Coach, train and support teammates in merchandise handling Oversee loss prevention, safety, and audit expectations and results Ensure adequate supplies to create an effective stockroom environment and continually maintain this (including all merchandise) within and around the vicinity Execute store operations with particular focus on product flow to/from the sales floor Maximize sales opportunities and communicate merchandising opportunities to store leadership Model the UA service culture and exceed customer expectations according to UA sales model Maintain brand productivity standards for shipment process, replenishment, markdowns, merchandising, and cycle counts through company tools and resources Maintain SOP/Retail Operations Manual Assume Sales Keyholder responsibilities in the absence of the role in store Assist as needed in operations - cash desk/ticketing Collaborate with teammates to achieve store goals Be accountable for self-development, while seizing growth opportunities to increase performance Perform other tasks as assigned by management Requirements To be considered for this role, you must meet these minimum requirements: At least 18 years old High school degree or equivalent 1+ year of retail/stock or freight experience Available to work a flexible schedule, including evenings, weekends, and holidays Local language fluency required; basic English is a plus Basic numeracy, literacy, listening, and communication skills Knowledgeable of stockroom, risk management & safety Demonstrated ability to work in a fast-paced and deadline-oriented environment Comfortable with or willingness to learn technology (such as hand-held and mobile devices) Strong communication skills Can stand, lift, walk, bend and lift cartons weighing up to 25 lbs./12 kgs during each work shift with or without accommodation Benefits & Perks Perks & benefits our Full-Time Stock Keyholders receive: Benefits will include, where applicable, statutory entitlements commensurate with local labor laws (such as social security, paid leave, and pension contributions), along with company-provided benefits which may include the following, depending on regional requirements and availability: Generous employee discount on Under Armour products Comprehensive well-being support, including access to health and wellness resources Retirement and insurance benefits tailored to your local market Employee Assistance Program for personal, family, or work-related support Opportunities for growth, learning, and career advancement across our global teams Monthly bonus incentive pay eligibility Paid time off and holiday pay benefits $18.75-$21.08 USD Our Commitment to Equal Opportunity At Under Armour, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion or belief, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, family or paternal status and any other characteristic protected by applicable law. Under Armour seeks to recruit, develop and retain the most talented people representing a wide variety of backgrounds and perspectives. If a reasonable accommodation is needed to participate in the job application or interview process, please contact our Human Resources team via candidateaccommodations@underarmour.com.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Pay Range: ($33,639.00 - $50,458.00) Target Bonus: % Req ID: 27317 Summary Responsible for pulling, weighing, preparing and completing documentation for customer orders which are to be delivered by commercial trucker. Load/unload truck shipments. Warehouse received material and finished product in proper location. Support other departments to retrieve and replace inaccessible stock as needed. Key Deliverables Correctly pulled/boxed/prepared customer orders Work environment cleanliness, and organization No safety incidents or accidents Well maintained packaging and shipping supplies Key Accountability Metrics Satisfactory ISO and QC audits Monthly Customer Complaint Report Performance appraisals Key Responsibilities and Essential Functions 20% Pick and Pack Customer Orders Picks orders which are to be delivered by commercial trucker based on customer order and completes required documentation. Prepares pulled orders and places in holding area for truck pick up. 40% Load/Unload Shipments - Warehouse Material and Product Loads and unloads truck shipments received through Distribution. Follows proper procedure to handle deliveries in order to facilitate entry into Harris inventory system. Warehouses received materials and finished product in proper Manufacturing or Distribution areas, recording location on appropriate documentation. 20%Other Departments Support Aids other departments by pulling and replacing inaccessible stock using forklift. 5% Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears PPE as required by safety regulations. 5% Maintain Quality Maintains quality by verifying that pulled product, packaged or not, meets Deliveries requirements and work procedures. 5% Complete Documentation Completes the following forms/reports as required by department procedures: • Deliveries • Returned Goods Authorization • Daily 5S Check Sheet • Daily Forklift Inspection • Packaging/Shipping Supplies Checklist • Packing List on incoming shipments 5% Support Department and Company Initiatives Works on cost saving projects, Six Sigma projects, and provides support for other team members and projects. Attends team meetings. Utilizes lean tools and techniques such as 5S and visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Education and/or Experience Required - 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Preferred - Experience related to distribution; some computer knowledge; forklift license. Core Competencies Required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Qualities and Skills Initiative, flexibility, responsibility and independence, ability to multi-task, goal-oriented, teamwork, excellent communication skills, ability to handle projects of varying scope, attention to detail, respectful of others, and willing to share expertise with others. Language Skills Ability to read and interpret documents such as safety rules, specific customer requirements, procedures. Ability to communicate effectively with coworkers Mathematical Skills Ability to work with basic mathematical concepts. Reasoning Ability Ability to define problems collects data, establish facts, and draw valid conclusions. Ability to interpret technical instructions. Physical Demands of Position - See Physical Demands Form Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

At UniFirst, we're a global leader in uniform rental and facility service solutions for businesses across industries - from manufacturing and food processing to healthcare and hospitality. With a reputation for superior service and long-term customer partnerships, every uniform, product, and service we offer comes with integrity, commitment, and hard work. Come join a team that always delivers! Why Join Us? Sell essential, recession-resistant services Represent a trusted brand with high customer retention Be part of a supportive sales team that offers consistent 1:1 coaching, ongoing sales learning, and real growth opportunities Position Summary We're seeking a high-performing B2B Sales Representative to drive new business growth in an assigned territory. The ideal candidate thrives on prospecting, closing complex contracts, and building long-term relationships with business clients. Key Responsibilities Prospect and qualify leads across a defined territory through cold calling, networking, referrals, and in-person visits Conduct on-site assessments and presentations for uniform rental, floor care, restroom, and facility service programs Develop tailored proposals and close multi-year service agreements Maintain and update CRM with accurate client information and activity Meet or exceed monthly and quarterly sales quotas Collaborate with service and operations teams to ensure seamless customer onboarding Compensation & Benefits Competitive base salary + monthly uncapped commissions and quarterly bonuses Monthly car allowance and fuel card Medical, dental, vision, 401(k) with match Paid time off and holidays Career advancement opportunities into Sales management or National Accounts Qualifications What We're Looking For: 0-2+ years of B2B sales experience (uniform rental, industrial supply, waste management, safety gear, or janitorial services preferred) Proven track record of exceeding sales targets and managing a full sales cycle Strong negotiation and closing skills Self-motivated and goal-oriented Willingness to take coaching and feedback Valid driver's license, clean driving record, and a reliable vehicle Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

We are seeking a Process Technician to support operations at a single manufacturing site and across customer locations. This role is critical in ensuring smooth onboarding of new jobs, validating processes handed off by R\&D, and maintaining sustainable production practices. Additionally, the Process Technician will provide technical support to ensure products remain in spec, lead quality and efficiency improvements, and assist with new product development initiatives. The ideal candidate will be highly organized, detail-oriented, and skilled at translating technical requirements into practical, repeatable processes while responding quickly to production challenges. Why work at MCC: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance, and 401(k) Paid Holidays: New Year's, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Key Responsibilities: Job Onboarding: Lead the introduction of new products or jobs into production, ensuring readiness and alignment with plant capabilities. Training & Support: Develop and deliver training for floor personnel on new processes, equipment, and best practices. Process Validation: Confirm that R\&D handoffs are feasible and sustainable for long-term production. Technical Support: Provide proactive and reactive support to operators, ensuring products remain in spec and resolving issues quickly. Documentation & Standards: Create and maintain detailed process documentation, SOPs, and quality standards. Trials & Testing: Plan and execute trials to validate processes, troubleshoot issues, and optimize performance; conduct lab evaluations and comparative analysis with competitive products. Continuous Improvement: Identify opportunities to streamline workflows and enhance efficiency in label manufacturing and related operations. Customer Interaction: Support customer and MCC-sponsored new product development projects; participate in coater trials and customer visits, occasionally requiring on-site work across shifts. Quality Oversight: Maintain lab/testing equipment and calibrations; initiate raw material complaints (SNAR), track corrective actions, and manage quality holds. Qualifications: Bachelor's degree in engineering or related field (or equivalent experience); 2- or 4-year degree or 2-4 years of related experience/training acceptable. Experience in manufacturing environments, preferably in labels or similar industries. Strong problem-solving skills and ability to manage multiple priorities. Math skills (including Algebra) and knowledge of printing/converting materials and technologies. Excellent communication and training skills; ability to write reports, business correspondence, and procedure manuals. Ability to travel for internal and customer visits and trials. Other Considerations: Occasional lifting of rolls/samples up to 40-45 lbs. Work around coating and slitting equipment; safety shoes may be required. Professional attire for customer visits; flexible hours for multi-shift coverage #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27763 Job Responsibilities Build Mechanical sub-assemblies, final assemblies and any other Mechanical task for the job. Follow safety procedures/ training as outlined and identified by Fori Automation management, MIOSHA, and OSHA. Complete as required in process QC check sheets. Complete as required QC audits. Assure good craftsmanship on jobs that are being built. Follow good housekeeping practices. Take direction from Leader and/or Supervisor Provide feedback on job status to Mechanical Assembly Leader. Know and understand due dates for jobs and schedule work accordingly. Follow-up with supervisor on daily basis to report progress of job(s) being worked on. Assist in disassembly, packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with receiving when required. Assist in start-up/de-bug of equipment. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Read and interpret build prints. Work with Mechanical Engineers and build Leaders to correct any problems with design of the machine/controls. Recommend, initiate, and follow-up as needed on engineering changes and document according to ECO procedures. Work on continuous improvement projects as needed. Support special assignments as needed. Provide training and assistance to new employees. Job Requirements High School Diploma required 5 years experience as a Machine Builder Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Route Service Manager UniFirst seeking a Route Service Manager to join our team! The Route Service Manager will recruit and lead a team of Route Service Supervisors and Route Service Representatives who deliver to multiple customers per day - ranging from small family owned businesses to major corporate locations. The ideal candidate will drive customer satisfaction, account growth, and profitability for their location. What's in it for you? Training: Our Team Partners get quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Mobility: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. The Route Service Manager role can lead to many other leadership opportunities in our Plants and across the organization. Culture: Our family culture is what makes UniFirst an organization that stands out from the rest. Did we mention no nights or weekends? Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Oversee the recruiting, training, and development of a team of Route Service Representatives and Route Service Supervisors Build strong relationships with your customers and elevate your team's level of achievement in customer satisfaction Collaborate closely with location management team to provide the best customer service and product programs Negotiate customer contract renewals Qualifications What we're looking for: An individual who is business savvy and enjoys figuring out innovative ways to help increase profit and grow the customer satisfaction within their UniFirst Location A results-driven, relationship manager who isn't afraid to roll up their sleeves and help the team and most importantly, the customer Someone who will enjoy working with your own team of Route Service Representatives and Route Service Supervisors that need your help and support as they develop in their own role Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards. High School Diploma or GED - bachelor's degree preferred. Prior customer service experience Ability problem solve and handle a variety customer service situations Ability to negotiate, train, coach and lead a team Strong computer proficiency (MS Office) Excellent verbal & written communication skills 21 years of age Valid non-commercial driver's license in the state of residence Must meet pre-employment DOT physical requirements Physically capable of lifting up to 50 pounds Benefits & Perks 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses The estimated base salary for this position ranges from $62,400 to $68,640 yearly, with additional management bonus eligibility. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Maintenance Mechanics 2nd and 3rd Shifts Starting Hourly Range : $29.55 - $32.36 + 0.75 shift differential. Based on qualifications and/or experience. Applicants must NOT now, or at any time in the future, require employer sponsorship for a work visa. Applicants must be authorized to work in the United States for any employer. MUST be 18 years of age or older. Rochelle Foods LLC has openings for Industrial Maintenance Mechanics. Successful candidates will work in our food processing production facility located in Rochelle, IL and enjoy competitive wages along with a competitive benefits package. Vacancies are typically on 2nd or 3rd shift with opportunities for overtime. Weekend work is required. Specific schedules will be discussed during the interview process. Rochelle Foods, LLC produces a variety of products for foodservice and retail consumers, including Hormel Bacon 1, Hormel Black Label bacon, precooked and microwaveable bacon, Hormel Compleats microwaveable meals and deli hams. Responsibilities: This position requires the ability to maintain, troubleshoot, and repair equipment in an industrial manufacturing environment. Perform proactive and reactive maintenance on all production equipment, buildings, and grounds. Use knowledge and skill to produce equipment and modify existing equipment to meet the needs of the production teams. Perform the necessary work with a minimum of direct supervision to identify and solve problems. Use communication skills to keep Supervisors, Maintenance Engineers and fellow team members informed of their progress. Performs other tasks as assigned by management. Follow food safety procedures in accordance with the food safety policies of Rochelle Foods, LLC. Preferred Qualifications: Qualified candidates will have either previous relevant experience as an Industrial Maintenance Mechanic, or related field, or training at an accredited technical school. · Strong problem solving and decision-making skills. · Ability to work in a team environment on a variety of complex projects. · Well-developed interpersonal, organizational, and analytical skills · Well-developed written and verbal communication skills. Preferred Experience · Prefer completion of technical training at an accredited technical school for industrial maintenance/mechanic · Prefer 6+ months experience working as an industrial maintenance mechanic, preferably in a food production facility Apply at ************************* Company Information: Thank you for your interest in becoming part of the Rochelle Foods Team! At the Rochelle Foods plant, Employee Safety and Food Safety are our top priorities! We believe every employee has the responsibility to maintain a safe working environment by closely following our safety policies and actively engaging in our safety policies and actively engaging in our safety culture. Also, by adhering to the highest food safety standards, our manufacturing facility is able to produce quality, wholesome foods to our consumers. Employee Food & Safety: At Rochelle Foods, Employee Safety and Food Safety are our top priorities! We believe every employee has the responsibility to maintain a safe working environment by closely following our safety policies and actively engaging in our safety culture. Also, by adhering to the highest food safety standards, our manufacturing facility is able to produce quality, wholesome foods to our consumers. Benefits: Our benefits package includes a comprehensive health insurance plan, prescription drug plan, dental and vision plan, 401(k) with company match, employee assistance and wellness plan, life insurance, short-term disability, long-term disability, vacation and holiday pay, and educational assistance for employees and their dependents. New Employees: New Employees at our facility are immediately place on a 3-month probationary period. During this time, employee attendance and performance are closely monitored. While on probation, management reserves the right to move and employee to a different open position anywhere in our facility to meet the needs of the business. We appreciate our consideration of our company as your next employer and look forward to hearing from you! If you need assistance completing the online application, please contact the HR office at ************. Rochelle Foods provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $22.51-$29.00 Target Bonus: 5.0% Req ID: 26396 Job Responsibilities Take direction from Leader and/or Supervisor Provide training and assistance to new employees. Provide feedback on job status to Electric/Pneumatic Assembly Supervisor. Assist in start-up/de-bug of equipment. Assure good craftsmanship on jobs that are being built. Follow and enforce good housekeeping practices with all department personnel. Know and understand due dates for jobs and schedule work accordingly. Work with Controls Engineers to correct any problems with design of the machine/controls. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Follow-up with supervisor on daily basis to report progress of job(s) being worked on.. Recommend, initiate, or follow-up on engineering changes and document according to procedure(s). Assist in packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with Receiving when required. Must know how to read and interpret build prints. Job Requirements Education: High School Diploma required. Journeyman's card or Journeyman status preferred Experience: 5 years minimum experience as industrial pipefitter Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $17.36-$28 Target Bonus: 5.0% Req ID: 26241 Job Responsibilities This is a NIGHT SHIFT Position Responsible for operating and maintaining assigned Machine to produce high-quality machined parts according to specifications. This role requires strong technical proficiency, attention to detail, and a commitment to safety and quality. - Set up assigned Machines according to job specifications and blueprints. - Operate Machines to perform machining operations such as milling, drilling, and tapping. - Monitor machine operations to ensure parts are produced within tolerance and meet quality standards. - Perform routine maintenance on machines to ensure optimal performance and minimize downtime. - Troubleshoot machine issues and make necessary adjustments to maintain production efficiency. - Inspect finished parts for defects and ensure compliance with quality standards. - Follow safety procedures and guidelines to prevent accidents and injuries in the workplace. - Maintain a clean and organized work environment. Job Requirements - High school diploma or equivalent; technical certification or vocational training is a plus. - Experience operating in a manufacturing environment. - Experience with Mazatrol or Mazak Smooth G controller is a must. - Must be experienced with setting up and qualifying weldments. - Strong understanding of machining principles and practices. - Proficiency in reading blueprints and technical drawings. - Ability to use precision measuring tools such as calipers, micrometers, and gauges. - Excellent problem-solving skills and attention to detail. - Ability to work independently and as part of a team. - Good communication skills and the ability to follow instructions. - Physical stamina and the ability to lift heavy objects. - Commitment to safety and quality. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Territory Manager to join our family. As a Territory Manager, you will be responsible for servicing and managing relationships with customers. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. Compensation: from $41,600 annual salary, dependent on experience and skills plus a base commission structure plan! What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: • Provide consistent and timely service to customers in your territory. • Service 10-15 customers per day in a company vehicle. • Accommodate a customer's needs with products that will help provide a safe, pleasant, and productive workplace. • Organize and implement a “work plan” for maximizing daily sales and decreasing mileage between calls. • Maintain an adequate supply of promotional materials, flyers, and business cards. • Maintain a call average that is consistent with current company objectives. • Maintain and turn in paperwork in a timely manner. • Mail or email work orders, call reports, and vehicle maintenance reports as required. • Keep handheld computer data updated and in compliance with company policy. • Keep abreast of all price changes and sell accordingly. • Maintain a consistent paper flow by avoiding errors on paperwork submitted. • Maintain adequate vehicle stock and rotate accordingly. • Adhere to the company vehicle maintenance schedule and policy. • Understand and comply with all company policies. • Have proper tools and supplies such as; anchors screws, screwdriver(s) Hammer and a charged drill on van in order to install equipment within a customer's facility. • Maintain a clean company vehicle inside and out to promote a good company image. • Manage your geographical territory and notify management of any territory problems. • Promote growth by continuously making cold calls and developing new businesses. • Keep up to date about competitive companies, their products and prices • Continuously gain knowledge of First Aid + Safety products. • Share pertinent information about pricing and products with other employees during sales meetings. Qualifications What we're looking for: • Must be at least 21 years or older. • Valid non-commercial driver's license and safe driving record is required. • 1-3 years of B2B sales experience or equivalent is preferred. • Must be knowledgeable in basic computer and tablet skills and be proficient with Microsoft Word and Excel. • Ability to lift and carry up to 40 lbs. About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Reliability Engineer is a key driver of MCC's Total Productive Maintenance (TPM) strategy-responsible for building equipment reliability and asset care systems that enable world-class manufacturing performance. This role leads the analysis, design, and execution of preventive and predictive maintenance programs, while embedding TPM principles across all facility and utility systems. The Reliability Engineer partners closely with Maintenance, Operations, and Continuous Improvement teams to establish a culture of autonomous maintenance, equipment ownership, and proactive problem prevention. By developing standard work, training, and data-driven reliability programs, this position ensures our plants operate safely, efficiently, and with minimal unplanned downtime-directly supporting MCC's operational excellence and lean transformation goals. Why Work at MCC Competitive compensation: $95,000 - $130,000 Comprehensive benefits package including medical, dental, vision, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to be part of a global leader in sustainable packaging and drive TPM excellence that transforms how our sites operate. Responsibilities Total Productive Maintenance (TPM) Leadership Serve as a TPM subject matter expert, driving implementation of MCC's TPM pillars (Focused Improvement, Autonomous Maintenance, Planned Maintenance, Early Equipment Management, and Skills Development). Partner with plant leadership to design and execute site-specific TPM deployment roadmaps and maturity assessments. Lead cross-functional kaizen events to identify equipment losses, eliminate chronic issues, and improve OEE (Overall Equipment Effectiveness). Coach maintenance and operations teams in root cause analysis, condition-based monitoring, and daily equipment care standards. Champion Autonomous Maintenance by training operators in basic inspection, cleaning, and lubrication activities to increase equipment ownership and engagement. Develop and track key performance indicators (KPIs) for reliability, including MTBF (Mean Time Between Failures), MTTR (Mean Time To Repair), and OEE. Preventive & Predictive Maintenance Ensure all equipment meets MCC safety, quality, and operational standards. Lead the development and execution of robust preventive and predictive maintenance programs. Audit and improve AssetEssentials (or other CMMS) data accuracy, utilization, and reporting to enable effective decision-making. Analyze failure modes, equipment histories, and maintenance data to identify improvement opportunities. Partner with engineering and operations to plan equipment upgrades or replacements to improve reliability. Mentor and coach Maintenance teams to build a proactive, data-driven reliability mindset. Training & Capability Building Design and facilitate training programs for maintenance and production personnel on TPM, equipment care, and reliability fundamentals. Develop standard work and visual controls to support consistent maintenance practices across MCC sites. Collaborate with Corporate Standards Committees to align training content with global TPM deployment and corporate best practices. Communicate training plans and progress to site leadership, ensuring accountability and alignment to TPM goals. Travel Travel may be required up to 75%, including daily, overnight, or extended stays based on business needs (e.g., 10 days on / 4 days off). Travel frequency will be determined by the supervisor based on TPM, preventive maintenance, and training priorities. Qualifications Bachelor's degree in Engineering, Maintenance Management, Facility Management, or a related technical field (or equivalent experience). Minimum 10 years of reliability, maintenance, or operations experience in a manufacturing environment. Demonstrated expertise implementing Total Productive Maintenance (TPM) or similar reliability-centered maintenance systems. Strong knowledge of mechanical, electrical, pneumatic, and hydraulic systems. Proven success leading maintenance teams and improving equipment performance in a lean manufacturing setting. Experience facilitating TPM kaizens, OEE improvement projects, or AM/PM pillar activities. Familiarity with CMMS (AssetEssentials or equivalent) and maintenance data analytics. Preferred Skills Proven ability to lead TPM deployment or coach site teams through TPM maturity stages. Strong analytical and problem-solving skills; able to identify patterns in maintenance data and drive systemic solutions. Excellent written and verbal communication skills; ability to train and engage employees at all levels. Advanced Excel or data visualization skills for performance tracking and analysis. Self-motivated, results-oriented, and capable of managing multiple priorities in a fast-paced environment. Demonstrated understanding of Lean tools such as 5S, Kaizen, SMED, and Standard Work. Confident decision-maker with a collaborative, hands-on approach to problem solving. Physical Requirements Regularly works in a manufacturing environment; must be comfortable standing for extended periods and navigating production areas. Must be able to lift up to 40 lbs. and wear required personal protective equipment (hearing, eye, and foot protection). Occasional work in an office environment, using computers and communication tools. Flexibility to work varying shifts or schedules as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Professional Sales Person to join our family. As a Team Partner in the Sales Department, you will be developing new business for UniFirst First Aid retail marketing through high-level selling skills. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Sell and promote First Aid products to new accounts with 75 employees or more and/or multiple locations. Develop new business and penetrate accounts further to sell additional lines with the priority as first aid, facility services, and safety products. Meet new customer needs with products that will help provide a safe, pleasant, and productive workplace. Lead 411 as another tool to grow your prospect hopper. Organize and implement a “work plan' for maximizing daily sales and decreasing mileage between calls. Maintain a call average that is consistent with current company objectives. Promote growth by continuously setting appointments, making cold calls, and gaining referrals for new business. Participate and execute information provided from sales meetings. Submit work orders, paperwork and expense reports as required. Keep paper-flow consistent by ensuring accuracy. Communicate with the local Sales Manager, Territory Manager and the Regional Sales Manager with all pertinent information for any new accounts. Keep abreast of all price changes and sell accordingly. Maintain a prospect database of all accounts being developed. Participate in periodic promotions. Ensure that personal vehicle used for company business is clean, organized, and properly maintained. Adhere to company policies as outlined in the UniFirst Employee handbook and the Green Guard Field Manual. Keep up to date about competitive companies, their products, and prices. Share pertinent information about pricing and products with other employees during sales meetings. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED equivalent is required. Must be 18 years of age or older. Valid driver's license and safe driving record are required. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards. Two years of business to business selling experience is required. High-level selling skill including strong prospecting and closing skills. Knowledge and exceptional sales experience. Ability to be resourceful. Ability to lift up to 30 lbs. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lee Company is looking for Commercial HVAC Technicians to join our growing team in Middle Tennessee. Commercial HVAC career opportunities are available in Maintenance, Service, or Install. We offer site-based and truck-based positions along with a competitive salary, comprehensive benefits package, and opportunities for growth and advancement. Our commercial HVAC positions provide our customers with exceptional service when installing, troubleshooting, repairing, and maintaining their commercial HVAC equipment, including: Boilers Chillers Commercial HVAC 1-25 tons Commercial HVAC 25-80 tons DOAS Equipment Water Source Equipment Commercial Refrigeration Cooling Towers VRF Equipment If you are a skilled and dedicated worker looking for a challenging and rewarding opportunity, we want to hear from you! Apply now to join our team! Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus free virtual primary care, mental health, and urgent care services for employees and their family members. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer . Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will play a crucial role in grocery stores nationwide, utilizing cutting-edge smartphone technology to capture and store essential data for our clients Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $15.00 per hour Growth opportunities abound - We promote from within No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 10 lbs. Have reliable transportation to and from work location Have 1-2 years of merchandising experience Have experience leading and training people Can use your smartphone or tablet to record work after each shift Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment Join us and see what's possible for you! Click here to get started.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $38.00/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc... Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Ensure compliance of our measuring devices (i.e. Packers and Stockyards and Nebraska Department of Weights and Measures) Responsible for department budget, including labor and operating expenses Required Qualifications Legal to work in the US without the need of a Visa sponsorship Must be 18 years or older 2 year degree or better in electrical or electromechanical technologies or 3 years of experience with industrial process controls and industrial networking Competency in basic electrical 24 and 120 volt AC and DC circuits Basic knowledge of Windows XP/7 operating systems Ability to read, write and speak English Preferred Qualifications Experience in food processing environment Proficient in Allen-Bradley PLC Programming and troubleshooting, RsLogix 500/Control Logix 5000, Factory Talk View Install and trouble shoot Industrial Networks- Ethernet base and components Ability to read and interpret schematics, general machine installation and repairs Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

This position is responsible for delivering products, including hazardous materials, to customers from Sherwin-Williams stores using box and flat-bed trucks. Drivers ensure deliveries are complete, packed correctly, and safely delivered to the correct customer. Drivers are accountable for customer satisfaction and for transporting items in a safe, timely manner. The individual selected for this role will be expected to work at Store #3490, located at: 8101 SW Frontage Rd Ste 200 Ft. Collins CO 80528 Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's customers, staff, employees, vendors, contractors, and the general public. At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 - Online Application Find the role(s) that interest you on our Careers page: ****************************** Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 - Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You'll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 - In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute-it matters to us. A general description of benefits offered can be found at ***************************** Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Ensure deliveries are prepared to meet customer requirements in the most efficient manner Load customer orders properly on the truck Ensure appropriate forms are completed Load, transport, and deliver items to customers in a safe, timely manner Maintain the store vehicle and alert the supervisor to repair and servicing needs Provide excellent customer service, answer questions, and handle complaints from customers Adhere to assigned routes and following time schedules Abide by all transportation laws and maintaining a safe driving record Prepare reports and other documents relating to deliveries Operate equipment and machines, such as cars, trucks, forklifts, etc. Perform other tasks in the store, including warehouse duties, tinting, and mixing customer orders and waiting on customers Minimum Requirements: Must be at least 21 years of age Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future Must have a valid, unrestricted Commercial Driver's License (CDL) with a hazardous materials endorsement Must have a valid Medical Examiner's Certificate (MEC) from a Department of Transportation (DOT) licensed "medical examiner" listed on the Federal Motor Carrier Safety Administration (FMCSA) National Registry or be willing to obtain one within five business days of receiving a conditional offer of employment Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion. Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation Must read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. Preferred Qualifications: Have at least a High School diploma or GED Have at least one (1) year experience working as a delivery driver Have at least one (1) year of work experience using material handling equipment (for example: forklifts (stand and sit), pallet jacks, hand trucks, order pickers, vacu-hoists, drum dollies, conveyor belts, etc.) Have previous work experience selling paint and paint related products Ability to read, write, comprehend, and communicate in more than one language Ability to read, write, comprehend, and communicate in Spanish #SWDSIII

Would you like to be part of a focused, dedicated team? Do you want to work and grow with other motivated, ambitious people? Wagner Equipment Co. offers challenging career opportunities, extensive training and employee development along with an opportunity to grow your career and thrive under Wagner's reputation for excellence. We offer excellent benefits and supply you with the tools you need to maximize your potential and grow within Wagner. Benefits include: * Paid Time Off (PTO) Plan - Up to 96 hours of PTO in your first year + 8 company paid holidays * Medical, dental, and vision insurance * Life and AD&D Insurance * Retirement Plans - 401K and Roth 401K , eligible employees can receive a company contribution up to 7% * Tuition Reimbursement * Employee Assistance Program (EAP) * CEFCU- Citizens Equity First Credit Union - Employees have access to services include payroll deductions savings, accounts, loans, VISA card, and more. * Additional Benefits include: Unum Supplemental life Insurance, Aflac Critical Illness + Accidental Insurance, ID WatchDog and discounted employee phone plans. The Field Service (Lube) Technician is responsible to safely performing basic preventative maintenance on customer earthmoving equipment in a manner that reflects the company's vision of working as "One Professional Team." Pay rate: $27.00 to $31.00 per hour Pay rate is dependent on education & experience. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. * Completes service reports, warranty reports, and inspection reports as needed * Communicates PM problems to direct supervisor as they occur * Operates heavy equipment safely * Recognizes safety related issues and notifies proper personnel * Obtains oil samples form machines * Drains and replaces oil * Replaces oil, fuel, air conditioning, and cab filters * Accurately locates parts and service information using SIS * Accurately orders and returns parts, following identified procedure * Removes and installs components as needed to adjust engine valves * Trains and guides the work of other PM Technicians * Operates a lube truck * Follows steps outlined in maintenance manual * Upon infrequent occasions, completes Revisits, PIP's, and/or PSP's * Performs and completes machine inspection reports * Performs the highest level of quality work that is expected * Other duties as assigned by manager Required Education and Experience: * High School Diploma or GED * 1+ years servicing machines * 1+ years administrative/clerical experience * 1+ years customer service experience Additional Eligibility Requirements: * Commercial Driver's License * Must pass all required pre-employment screenings which may include but are not limited to background checks, drug/alcohol testing, fit for duty testing, and any other job-related tests/screenings Physical Demands & Competencies: * Standing, walking, talking, sitting, use of hands & hearing * Ascending or descending ladders, stairs, etc. * Heavy work that includes lifting and/or moving objects up to 60 pounds or more * Data Entry, telephone, reading/writing, reasoning, organizational, communication & math skills * Safety & Product Knowledge * Basic Knowledge of DBS * Basic Knowledge of ET/SIS/SIS Web/STW Work Environment: * Noise: Loud * Indoors and Outdoors * Small and/or enclosed spaces Travel Requirements: * 50%- 75% Other Duties: Job Offers are contingent upon all required pre-employment screenings which may include but are not limited to background checks, drug/alcohol testing, fit for duty testing, and any other job-related tests/screenings. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Wagner Equipment Co. is an EEO/AA/Veterans/Disabled employer.