Helper jobs at Wanzek Construction

Top helper qualifications with pipefitting experience required. this is a no per diem job A pipefitting helper will assist with various manual needs of the maintenance work being performed including but not limited to moving equipment, digging, retrieving equipment, standing by for fire safety and any other work instructed by a supervisor or journeyman. Qualification Highlights * Must be able to meet all physical demands - see below. * Must have experience using industrial hand tools and power tools * Must have reliable transportation and be able to work 7 days as needed Position Responsibilities * Position may perform a large range of manual activities including but not limited to moving equipment, digging, retrieving equipment, standing by for fire safety, and any other work instructed by a supervisor or a journeyman. * Use fire extinguisher. * Climb on to structures and Scaffolding. * Uses rigging and hoisting devices such as chokers, chain falls and come along to move equipment / materials into place * Conducts preventative maintenance such as lubrication and fixing or repairing worn parts. * Follows direction from supervisor Required Knowledge, Skills, and Abilities * Basic knowledge of hand tools and power tools. * Good problem-solving abilities * Good aptitude and manual dexterity * Good reading comprehension * Ability to work with others - team player * Good communication skills with co-workers and supervisors * Commitment to Zachry values and safety rules and regulations Preferred Qualifications * Zachry ROF'ed employee. * Former Zachry Employee. * Basic mechanical knowledge. * Experience on an industrial construction site * Formal/technical education. Reports to Position * This position does not have any direct reports. Physical Requirements * Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. * Will talk and hear to communicate. * Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. * Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will occasionally work at heights, climb ladders and stairways and work off of platforms. * Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. * Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. #LI-SV1

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience. **Auto req ID:** 23407BR **Project Name:** Port Arthur LNG **Location:** Port Arthur, Texas **Shift:** Day Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience. **Auto req ID:** 23757BR **Project Name:** Port Arthur LNG **Location:** Port Arthur, Texas **Shift:** Night Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience. **Auto req ID:** 23321BR **Project Name:** Port Arthur LNG **Location:** Port Arthur, Texas **Shift:** Day Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience. **Auto req ID:** 23583BR **Project Name:** Port Arthur LNG **Location:** Port Arthur, Texas **Shift:** Day Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience.

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience. **Auto req ID:** 22866BR **Project Name:** Port Arthur LNG **Location:** Port Arthur, Texas **Shift:** Day Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

Prepares site for daily work, performs all housekeeping and duties necessary for daily activities. Responsibilities: Sets up and operates production equipment in accordance with established guidelines and procedures. Adjust machine settings to complete tasks according to specification, accurately and in a timely manner. Move hand and foot levers to control diesel, electric, gasoline or steam-powered operating equipment. Interprets hand signals to determine where materials are to be placed. May be required to manipulate equipment on unlevel working surface. May assist in lifting, positioning and securing our materials and work pieces during installation. May be responsible for routine maintenance or repairs. Observes load hook up and determines safety of load. Manipulates crane control to regulate speed and direction of crane and hoist movement according to written, verbal or signal instructions. Inspect crane for defective parts, documents and notify the supervisor of the defects or malfunctions. Loads, transport, and unloads materials, tools, equipment and supplies. Performs minor maintenance or cleaning activities on tools and equipment. May be required to interpret load charts. Rely on instructions and pre-established guidelines to perform the functions of the job. Works under minimum supervision. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Education and Experience: High school diploma or equivalent and previous experience. Physical Requirements: Ability to reach, stand, walk, use finger, grasp, feel, talk, hear, see and to perform repetitive motions. Sedentary work: Exerting up to 10 lbs. of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Prepares site for daily work, performs all housekeeping and duties necessary for daily activities. Responsibilities: * Sets up and operates production equipment in accordance with established guidelines and procedures. * Adjust machine settings to complete tasks according to specification, accurately and in a timely manner. * Move hand and foot levers to control diesel, electric, gasoline or steam-powered operating equipment. * Interprets hand signals to determine where materials are to be placed. * May be required to manipulate equipment on unlevel working surface. * May assist in lifting, positioning and securing our materials and work pieces during installation. * May be responsible for routine maintenance or repairs. * Observes load hook up and determines safety of load. * Manipulates crane control to regulate speed and direction of crane and hoist movement according to written, verbal or signal instructions. * Inspect crane for defective parts, documents and notify the supervisor of the defects or malfunctions. * Loads, transport, and unloads materials, tools, equipment and supplies. * Performs minor maintenance or cleaning activities on tools and equipment. * May be required to interpret load charts. * Rely on instructions and pre-established guidelines to perform the functions of the job. * Works under minimum supervision. * Has knowledge of commonly used concepts, practices, and procedures within a particular field. Education and Experience: * High school diploma or equivalent and previous experience. Physical Requirements: * Ability to reach, stand, walk, use finger, grasp, feel, talk, hear, see and to perform repetitive motions. * Sedentary work: Exerting up to 10 lbs. of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Prepares site for daily work, performs all housekeeping and duties necessary for daily activities. Responsibilities: Sets up and operates production equipment in accordance with established guidelines and procedures. Adjust machine settings to complete tasks according to specification, accurately and in a timely manner. Move hand and foot levers to control diesel, electric, gasoline or steam-powered operating equipment. Interprets hand signals to determine where materials are to be placed. May be required to manipulate equipment on unlevel working surface. May assist in lifting, positioning and securing our materials and work pieces during installation. May be responsible for routine maintenance or repairs. Observes load hook up and determines safety of load. Manipulates crane control to regulate speed and direction of crane and hoist movement according to written, verbal or signal instructions. Inspect crane for defective parts, documents and notify the supervisor of the defects or malfunctions. Loads, transport, and unloads materials, tools, equipment and supplies. Performs minor maintenance or cleaning activities on tools and equipment. May be required to interpret load charts. Rely on instructions and pre-established guidelines to perform the functions of the job. Works under minimum supervision. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Education and Experience: High school diploma or equivalent and previous experience. Physical Requirements: Ability to reach, stand, walk, use finger, grasp, feel, talk, hear, see and to perform repetitive motions. Sedentary work: Exerting up to 10 lbs. of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Graywolf is seeking Pipe Helpers at our Port Sulphur, LA project site Graywolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating a culture of Safety, Quality and Performance to deliver the best completed projects to our customers. Summary: A helper assists journeyman level craft by performing support tasks on construction projects such as erecting, wrecking, repairing, maintaining equipment and performing janitorial functions. Essential Duties Safety - work safely around the hazards associated with the Construction field. Tools - use hand, electric, pneumatic and hydraulic tools and in a safe manner. Construction Math - Demonstrates a basic level of competency in construction math as required in trade practice. Rigging Equipment - Safely and competently identify and use basic rigging procedures and equipment including chain hoists, come-along, jacks and tuggers. Dig, spread and level dirt and gravel using a pick and shovel. Lift, carry and hold building materials and supplies Clean tools, equipment, materials and work areas, including sweeping, mopping and other general clean-up activities. Join, wrap, align and seal sections of pipe. Assemble sections of dredge pipeline. Measure distance from grade stakes and drive stakes Stretch tight line Bolt, nail, align and block up under forms. Signal operators of construction equipment to facilitate alignment, movement and adjustment of machinery to conform to grade specifications. Mop, brush or spread paints or bituminous compounds over surfaces for protection. Spray materials such as water, sand, steam, vinyl, paint or stucco through hose to clean, coat or seal surfaces. Grind, sand or polish surfaces using abrasive tools or machines. Demolish buildings, saw lumber, dismantle forms, remove objects from concrete, mount hangars and cut and attach insulating material. Work within precise limits and standards of accuracy. Follow oral and written directions. Work within company policies (including Safety and Human Resources policies), client policy and OSHA safety requirements. Perform other duties as assigned by the supervisor as needed. Qualifications: At least 6-months experience as a Helper level construction worker in particular trade for entry level helper At least 2-years experience as a Helper level construction worker in particular trade for a top level helper Must be able to successfully complete all required pre-hire requirements. Physical/Site Requirements: Lift and carry heavy items weighing up to 45 pounds. Move in and around confined and cluttered places, and uneven areas. Full range of motion and flexibility consistent with age. Work up to a 12-hour shift in varying temperature extremes and other outside conditions. Climb and maintain balance on steel framework, stairs, ladders, and scaffolds. Work at heights with fall protection, work from manlifts, baskets, JLG's etc. PPE footwear/prescription safety glasses or eye shields required. Graywolf Integrated Construction Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

More information about this job The Pipefitter Helper will assist skilled craftsperson(s) by performing supportive duties as directed and will work under immediate supervision. Assist in planning, lay-out, installation, testing, and repair of all types of piping systems in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by supervision. Must learn and understand all safety hazards related to the work and learn to safely and effectively use or operate work related tools and equipment. Will be required to work in a plant operations or a construction jobsite setting. Responsibilities *The following are intended as general illustrations of the work in this job class and are not all-inclusive for this position. Clean work area and restock supplies and materials as necessary Assist Pipefitter in lifting, positioning, and securing of materials during installation Perform minor maintenance and cleaning activities Assist Pipefitter in installation of all types of piping by learning to use appropriate hand and power tools Cut or drill holes, mount pipe hangers and brackets, perform other routine duties as directed Load, transport, unload and furnish pipefitter with materials, tools, equipment and supplies Learn to read and understand plans and specifications Assist other craft workers as needed Qualifications Physical Must be able to push/pull, lift, or carry up to 50 lbs., but may occasionally push/pull, lift, or carry up to 100 lbs. Subject to repetitive use of hands/arms, and legs Hand/eye coordination Must be able to communicate (hear, comprehend, and speak) to safely perform work Will need to be able to perform sedentary to heavy work May operate hand and power tools (electric, gas, and pneumatic) of all types with proper training and authorization Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis Position may require prolonged bending/twisting, walking, crawling, kneeling, reaching overhead, squatting, pushing /pulling, or standing and lifting Must be able to walk on uneven surfaces, muddy conditions, loose rock, loose/soft sand, etc. May be required to work in confined spaces Will be exposed to adverse weather conditions (Heat, Cold, Rain, Etc.) Mental Must have the ability to communicate effectively with management/ supervision Work at various tempos, and concentrate amid distractions Decision making skills necessary Detail-oriented; must be able to remember, examine, and observe details

More information about this job MAINTENANCE CONTRACT WORKING 40 HOURS A WEEK. NO PER DIEM ACTIVE TWIC IS REQUIRED (NO RECEIPTS) The Pipefitter Helper will assist skilled craftsperson(s) by performing supportive duties as directed and will work under immediate supervision. Assist in planning, lay-out, installation, testing, and repair of all types of piping systems in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by supervision. Must learn and understand all safety hazards related to the work and learn to safely and effectively use or operate work related tools and equipment. Will be required to work in a plant operations or a construction jobsite setting. Responsibilities *The following are intended as general illustrations of the work in this job class and are not all-inclusive for this position. Clean work area and restock supplies and materials as necessary Assist Pipefitter in lifting, positioning, and securing of materials during installation Perform minor maintenance and cleaning activities Assist Pipefitter in installation of all types of piping by learning to use appropriate hand and power tools Cut or drill holes, mount pipe hangers and brackets, perform other routine duties as directed Load, transport, unload and furnish pipefitter with materials, tools, equipment and supplies Learn to read and understand plans and specifications Assist other craft workers as needed Qualifications Physical Must be able to push/pull, lift, or carry up to 50 lbs., but may occasionally push/pull, lift, or carry up to 100 lbs. Subject to repetitive use of hands/arms, and legs Hand/eye coordination Must be able to communicate (hear, comprehend, and speak) to safely perform work Will need to be able to perform sedentary to heavy work May operate hand and power tools (electric, gas, and pneumatic) of all types with proper training and authorization Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis Position may require prolonged bending/twisting, walking, crawling, kneeling, reaching overhead, squatting, pushing /pulling, or standing and lifting Must be able to walk on uneven surfaces, muddy conditions, loose rock, loose/soft sand, etc. May be required to work in confined spaces Will be exposed to adverse weather conditions (Heat, Cold, Rain, Etc.) Mental Must have the ability to communicate effectively with management/ supervision Work at various tempos, and concentrate amid distractions Decision making skills necessary Detail-oriented; must be able to remember, examine, and observe details

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience.

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience. **Auto req ID:** 23692BR **Project Name:** Rio Grande LNG **Location:** Brownsville, Texas **Shift:** Day Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience.

ESSENTIAL FUNCTIONS: Assists with all aspects of countertop installation process, including communicating with customer and staff Loads and unloads company vehicles with items necessary to complete installs Responsible for moving, setting, measuring, setting miters, onsite cutting and polishing and mounting stone countertops Assists with paperwork and ensures tools are loaded prior to leaving the warehouse Identifies any potential install issues and discusses with supervisor/lead prior to leaving for site Tears out old countertops prior to installation of new as required Maintains tools and ensures they are collected and returned to assigned vehicle at the end of each job Ensures jobsite is clean and left in an orderly fashion after installs are complete Reports safety issues immediately to their supervisor or manager. Follows all safety and OSHA standards and ensures a safe working environment Attends departmental meetings as required Performs other duties as assigned or required Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. QUALIFICATIONS (EDUCATION, CERTIFICATIONS, AND/OR TRAINING): Required Education High School diploma or equivalent (GED) Preferred Education: Trade School training/education Required Experience: 1+ year of previous construction experience Preferred Experience: 1+ years of solid surface countertop installation experience Drafting/ Auto-Cad experience is a plus Commercial truck driving experience Spanish-language fluency ESSENTIAL KNOWLEDGE, SKILLS, AND ABILITIES (KSA): Ability to accurately read architectural drawings and a measuring tape Ability to interact with customers and provide prompt and courteous customer service in a professional manner Able to use job-related tools effectively Detail-oriented and commitment to accurate work Self-motivated, responsible, and reliable with ability to work independently Possess an understanding of the fabrication process WORK ENVIRONMENT: This position will take place in active construction sites, as well as in a warehouse environment. PHYSICAL DEMANDS: This position will require regular, frequent lifting of countertop slabs and objects weighing 75 pounds or more, as well as regular frequent walking, standing, squatting, twisting, and other physical exertion. TRAVEL REQUIREMENTS: This position will travel daily to job sites around the greater DFW area as well as travel within a 200-mile radius of DFW to install countertops. Company vehicle and equipment will be provided to facilitate countertop installation.

General Supply is seeking an entry level, quick learning individual to join our team in the Indianapolis area. As part of our installation and services team, the HVAC Helper will install and service heating and cooling (HVAC) systems and products and ensure all work performed is done professionally, timely and accurately resulting in customer satisfaction. The ideal candidate should be detail-oriented, customer-focused, and eager to assist troubleshooting HVAC issues efficiently. Since its inception in January 1993, General Supply and Service has become the preferred supplier of accessories, parts, and services to the manufactured housing aftermarket. We have attained this status through our continued commitment to solve dilemmas for homeowners and contractors alike. Responsibilities: * Works safely when performing installations or servicing of HVAC equipment. * Follows all company policies and procedures for the type of installation and service being performed. * Follows directions provided by the Lead Installer Service Technician related to the scope of work. * Ensures that all work is completed according to manufacturer specification. * Has knowledge of the HVAC theory. * Has knowledge of the HVAC electrical theory. * Premeasures jobs to identify proper materials required for scope of work. * Performs the installation of household appliances as needed. * Receives, verifies, and loads all equipment and materials needed for each job and maintains stock levels on truck. * Maintains the company's vehicle and notifies management when maintenance is required. * Assists and trains associates as directed by management. * Completes all required paperwork prior to the end of the shift. * Performs all readings on test instruments and understands the importance of these readings. * Follows the national, state, and local mechanical, electrical and plumbing codes, and regulations. * Ensures office dispatcher/supervisor is aware of job status and any delays that may occur. * Maintains all company tools in good working order and ensures all tools are safe to use. * Always performs work in a professional manner. Ensures customers are always treated with respect. Reports any issues or problems to manager immediately. Requirements: * A High school diploma or GED is required. * Completion of a trade program is preferred. * Must be EPA 608 certified or willing to be certified within 90 days of employment * Must be mechanically inclined and be able to distinguish between different HVAC equipment. * Demonstrates strong organizational and customer service skills. * An honest and dependable person who is willing to learn new tasks and is a team player. * Demonstrates solid problem solving, judgment and decision-making skills. * Effective written and verbal communication skills with customers and co-workers. * Ability to work on-call and overtime hours require. * Maintains a valid driver's license and an acceptable MVR. * Follow rules and regulations as described in the company handbook. Benefits: * Health Care Plan (Medical, Dental & Vision) * Life Insurance (Basic, Voluntary & AD&D) * Vacation and Personal Time * Short Term & Long Term Disability * 401K with Company Match * Paid holidays General Supply, a Style Crest company, is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by applicable law. We ensure fair treatment in all aspects of employment, including recruitment, hiring, training, promotion, and compensation. Our commitment to diversity and inclusion fosters a workplace where every individual is valued and respected. This position is located on-site in Indianapolis, Indiana. Typical store hours are Monday through Friday 8am to 5pm.

Job DescriptionGeneral Supply is seeking an entry level, quick learning individual to join our team in the Indianapolis area. As part of our installation and services team, the HVAC Helper will install and service heating and cooling (HVAC) systems and products and ensure all work performed is done professionally, timely and accurately resulting in customer satisfaction. The ideal candidate should be detail-oriented, customer-focused, and eager to assist troubleshooting HVAC issues efficiently. Since its inception in January 1993, General Supply and Service has become the preferred supplier of accessories, parts, and services to the manufactured housing aftermarket. We have attained this status through our continued commitment to solve dilemmas for homeowners and contractors alike. Responsibilities: Works safely when performing installations or servicing of HVAC equipment. Follows all company policies and procedures for the type of installation and service being performed. Follows directions provided by the Lead Installer Service Technician related to the scope of work. Ensures that all work is completed according to manufacturer specification. Has knowledge of the HVAC theory. Has knowledge of the HVAC electrical theory. Premeasures jobs to identify proper materials required for scope of work. Performs the installation of household appliances as needed. Receives, verifies, and loads all equipment and materials needed for each job and maintains stock levels on truck. Maintains the company's vehicle and notifies management when maintenance is required. Assists and trains associates as directed by management. Completes all required paperwork prior to the end of the shift. Performs all readings on test instruments and understands the importance of these readings. Follows the national, state, and local mechanical, electrical and plumbing codes, and regulations. Ensures office dispatcher/supervisor is aware of job status and any delays that may occur. Maintains all company tools in good working order and ensures all tools are safe to use. Always performs work in a professional manner. Ensures customers are always treated with respect. Reports any issues or problems to manager immediately. Requirements: A High school diploma or GED is required. Completion of a trade program is preferred. Must be EPA 608 certified or willing to be certified within 90 days of employment Must be mechanically inclined and be able to distinguish between different HVAC equipment. Demonstrates strong organizational and customer service skills. An honest and dependable person who is willing to learn new tasks and is a team player. Demonstrates solid problem solving, judgment and decision-making skills. Effective written and verbal communication skills with customers and co-workers. Ability to work on-call and overtime hours require. Maintains a valid driver's license and an acceptable MVR. Follow rules and regulations as described in the company handbook. Benefits: Health Care Plan (Medical, Dental & Vision) Life Insurance (Basic, Voluntary & AD&D) Vacation and Personal Time Short Term & Long Term Disability 401K with Company Match Paid holidays General Supply, a Style Crest company, is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by applicable law. We ensure fair treatment in all aspects of employment, including recruitment, hiring, training, promotion, and compensation. Our commitment to diversity and inclusion fosters a workplace where every individual is valued and respected. This position is located on-site in Indianapolis, Indiana. Typical store hours are Monday through Friday 8am to 5pm.