Quality Assurance Inspector jobs at Wanzek Construction - 228 jobs

What you'll do: Requires knowledge of industry specific codes and standards. CWI-Certification Strongly Preferred. The inspector will be required to interpret and evaluate inspection results for welding fit-up and filler metal placement with respect to applicable codes, standards, and specifications, be able to set up and calibrate all testing equipment Use visual inspection techniques (VT) as well as Ultrasonic testing (UT) and Magnetic Particle Testing (MT) to perform non-destructive tests to identify errors or defects in product. Oversee welder qualification tests and evaluate welder performance. Accurately complete and maintain all required records. Follow all safety rules and practices. Perform other duties as assigned. Overtime is expected and required to meet production goals.

Job Title: Quality Control Inspector, Topeka, IN FLSA Status: Non-exempt Summary Inspect parts, products and/or processes to insure conformance with standards. Inspects materials or products using fixed or variable measuring instruments. Checks for irregularities and defects. Compares product with parts list to ensure completion of assembly. Verifies specified dimensions on product or material by performing the following duties. Essential Duties and Responsibilities Goal: Inspect homes to ensure that they are built to code, they are PFS approved, and have good quality. Responsibilities include the following: Inspect daily for quality, appearance, and code items. This is done on-line in varying stations. Mark areas of the home that need repair or additional work. Call supervisors to come repair any issues. Red Tag homes if they need fixed off-line before shipment. Re-inspect homes that need more serious repairs. Keep a daily LINE WALK log to help identify repeats for the plant manager and QC manager. Scan in the line walk sheet and email it out daily. Log in the CCI items from the PFS write ups and email the report out as needed. Copy RTS pictures over into the M: drive every week. Cover RTS as needed. Shingle inspections need done at least twice a week. Scan in the report and email it out. Mate line measurement needs done at least once a week. Scan and send report out on this. Monthly - Do the critical item check list every month. Scan and email it to the QC Manager. Monthly - Do the fastener chart report every month. Scan and email it out. Weekly - Do testing (gas, electric, and DWV) audits. Scan and email them to QC Manager. Check Foam rooms, truss inspection, product rotation/storage, etc on a weekly basis. Update DAPIA manuals in the plant and in the Foreman offices. PLANT A added responsibility below: Label Mods with PFS label, state labels, and data plates. File the EOM (end of month) reports for PFS and required States. Complete mod check requests for state labels. Order labels as needed. Update modular log with label #'s, approval #'s, run #, dates, and addresses. Use the modular cheat sheets and Mod Inspector Training Notes for a more detailed list of what needs done daily/weekly/monthly. Additional duties may be assigned or added. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High School degree or G.E.D. and one-year related experience and/or training; or equivalent combination of education and experience. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to walk; sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is required to stand; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work will be done in seasonal weather, warm and/or cold temperatures. The noise level in the work environment is usually moderate to loud. EEO Statement Champion Home Builders is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other legally protected characteristics. Champion Home Builders participates in the E-Verify Program. Background check and Drug Screen are required

Join America's premier steel bridge fabricator! Veritas Steel's employees have been building America's bridges with American-made steel for more than 100 years. We specialize in complex bridges and structures of all shapes and sizes, whether arches, cable-stayed, suspension, bascule, or plate girders, we build it. Veritas is committed to providing employees with opportunities for training and professional development. If being a part of Building America's Infrastructure is something that interests you, then apply now! Relocation Assistance is available. Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. * Perform visual inspection of material as required. * Perform layout checks as needed. * Perform rotational capacity tests on bolts prior to use in shop. * Work with outside inspectors to resolve quality issues on the floor. * Monitor welder qualification tests. * Monitor and record welding parameters to insure compliance to approved WPS. * Be able to read and understand the Welding code and Specifications. * Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed. * Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? * Conduct audits of Quality Management System * Perform in a manner that will assure quality work flowing through the shop. * Work with welders and leadmen to maintain quality. * Be available, by use of a radio, etc. to perform needed checks. * Maintain a log of work done, and complete required reports. * Interpret the Specifications and applicable Codes. * Ability to be flexible to work either early or late within assigned shift as needed. * Coordinate inspection of QC hold points between production and DOT Inspectors. * Use and encourage safe working habits. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: * Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules. * Ability to understand and interpret blueprints, use measurement tools and techniques to verify geometric tolerances of fabricated parts and assemblies. * Strong attention to detail and ability to make informed decisions based on project codes and specifications * Coordinate your work with shipping department to assure loads have been inspected and ready to ship. * Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop. * General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. * Positive attitude to promote team morale and ability to coach employees for improved quality of workmanship Measures of Success: Objective facts that demonstrate great performance. * Outstanding work record, great attendance record and always-on time. * No accidents. A safe worker is an asset to both their fellow worker and the company. * Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements. * Accept positive feedback from fellow workers and supervisors, on performance and competencies. Requirements - * Certified Welding Inspector Certification or ASNT VT Level II Preferred Qualifications - * ASNT MT Level II * ASNT UT Level II * NACE or SSPC BCI Level I * Fabrication Shop Background 2nd shift is 530pm to 530am M - Th, 4 day work week

Join America's premier steel bridge fabricator! Veritas Steel's employees have been building America's bridges with American-made steel for more than 100 years. We specialize in complex bridges and structures of all shapes and sizes, whether arches, cable-stayed, suspension, bascule, or plate girders, we build it. Veritas is committed to providing employees with opportunities for training and professional development. If being a part of Building America's Infrastructure is something that interests you, then apply now! Relocation Assistance is available. Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. • Perform visual inspection of material as required. • Perform layout checks as needed.• Perform rotational capacity tests on bolts prior to use in shop.• Work with outside inspectors to resolve quality issues on the floor.• Monitor welder qualification tests.• Monitor and record welding parameters to insure compliance to approved WPS.• Be able to read and understand the Welding code and Specifications.• Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed.• Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? • Conduct audits of Quality Management System• Perform in a manner that will assure quality work flowing through the shop.• Work with welders and leadmen to maintain quality.• Be available, by use of a radio, etc. to perform needed checks.• Maintain a log of work done, and complete required reports.• Interpret the Specifications and applicable Codes.• Ability to be flexible to work either early or late within assigned shift as needed.• Coordinate inspection of QC hold points between production and DOT Inspectors.• Use and encourage safe working habits. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: • Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules.• Ability to understand and interpret blueprints, use measurement tools and techniques to verify geometric tolerances of fabricated parts and assemblies. • Strong attention to detail and ability to make informed decisions based on project codes and specifications• Coordinate your work with shipping department to assure loads have been inspected and ready to ship.• Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop.• General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed.• Positive attitude to promote team morale and ability to coach employees for improved quality of workmanship Measures of Success: Objective facts that demonstrate great performance. • Outstanding work record, great attendance record and always-on time.• No accidents. A safe worker is an asset to both their fellow worker and the company.• Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements.• Accept positive feedback from fellow workers and supervisors, on performance and competencies. Requirements - Certified Welding Inspector Certification or ASNT VT Level II Preferred Qualifications - ASNT MT Level II ASNT UT Level II NACE or SSPC BCI Level I Fabrication Shop Background 2nd shift is 530pm to 530am M - Th, 4 day work week

Who We Are: Allied Steel Buildings is a global manufacturer of steel buildings and structural steel solutions, offering best\-in\-class design, engineering and project management seamlessly integrated into our clients' processes. Since 2003, we have successfully delivered over 5,500 metal building projects across 72 countries, delivering building solutions for diverse industries, from data centers, sports & recreational facilities, aviation, manufacturing, equestrian & agricultural to commercial buildings and warehousing worldwide. We have 5 locations including our two manufacturing facilities, located in Texas and Spain, utilize cutting\-edge technology, including robotics and automation, to ensure our manufactured materials set a new standard for quality in the industry. Allied Culture: At Allied, we believe great service matters from the start and finish of everything we do. Going the distance for our clients begins with taking care of our team members. They are our most important asset. We invest in their continuous development, and recognize their contribution to our success. Great work starts with creating great work environments, promoting collaboration for a team dedicated to creating value worldwide. The Allied Team is highly resourceful, innovative, and competent with extensive experience. Our culture is open, accessible, adaptive and flexible, offering work\-life balance, and empowering our people, because everyone’s voice matters. We promote “we” over “me” and solutions oriented creative thinking. It’s the Allied way. This is an internal position available only to current team members. If you are interested in this or other opportunities with Allied Steel Buildings or Allied Fabricators LLC , please email your resume and the position you are interested in to *************************** . ​ Job Summary: The Lead Quality Control Inspector oversees and performs inspections of structural steel components throughout the fabrication process to ensure adherence to Allied’s Quality Management System (QMS), engineering standards, and customer requirements. This position leads quality assurance efforts on the shop floor, provides guidance to other QC inspectors, and supports continuous improvement initiatives to uphold product integrity and production efficiency. Responsibilities: Inspection & Quality Oversight: Lead all QC inspection efforts across production shifts, ensuring compliance with project specs, welding standards, and QMS protocols. Perform visual and dimensional inspections on beams, columns, plates, clips, and other fabricated parts. Evaluate welds for conformance; identify and document non\-conformities requiring rework or further testing. Perform and guide others in Non\-Destructive Testing (NDT) techniques, such as dye penetrant inspections. Ensure parts are properly marked and traceable at all production stages. Leadership & Communication: Serve as the primary liaison between QC, production, and engineering for quality\-related matters. Mentor and train QC team members in inspection standards and procedures. Lead shift handovers, safety meetings, and quality huddles. Communicate inspection findings and support documentation to supervisors and management. Dimensional Accuracy & Traceability: Use micrometers, calipers, and tape measures to verify component dimensions against drawings. Validate mill certifications and material traceability (e.g., heat numbers) on incoming steel. Ensure proper tagging and tracking of non\-conforming materials for isolation or disposal. Documentation & Control: Maintain and update inspection records, logs, and final QC reports. Use handheld\/mobile devices to upload data and photos into facility software. Manage distribution of updated drawings and promptly remove outdated versions from production. Equipment & Continuous Improvement: Monitor calibration and condition of inspection tools; ensure team use of compliant equipment. Participate in quality reviews and suggest process improvements to increase accuracy and reduce rework. Support root cause analysis efforts in cases of recurring issues. Safety & Compliance: Enforce adherence to all company safety procedures and OSHA regulations. Wear required PPE at all times and model safe practices for the QC and production teams. Promptly report hazards, incidents, or unsafe behavior to the Production Foreman or EHS. Qualifications: Experience: Minimum of 4 years in quality control inspection within steel fabrication or related industries Supervisory or lead experience strongly preferred Familiarity with AISC, AWS, or CWB standards is a plus Certifications: NDT Level I or II required (or must be obtained within 6 months of hire) AWS or ISO certifications are preferred Education: Technical degree in welding, steel materials, quality inspection, or related field preferred Skills & Abilities: Attention to detail, good communication skills, and the ability to work well in a team environment. Ability to read and interpret technical drawings, and familiarity with quality control processes. Ability to work independently with minimal supervision and as part of a team. Ability to read, write, and understand basic English\/Spanish to interpret\/follow safety guidelines and work instructions. Good communication and interpersonal skills. Reliable and punctual with a strong work ethic. Work Schedule: Monday\-Friday, 1st Shift (6:00am \- 2:00pm), 2nd Shift (2:00pm \- 10:00pm), 3rd Shift (10:00pm \- 6:00am) Depending on production needs, some weekend work may be required. Requirements Qualifications: Experience: Minimum of 4 years in quality control inspection within steel fabrication or related industries Supervisory or lead experience strongly preferred Familiarity with AISC, AWS, or CWB standards is a plus Certifications: NDT Level I or II required (or must be obtained within 6 months of hire) AWS or ISO certifications are preferred Education: Technical degree in welding, steel materials, quality inspection, or related field preferred Skills & Abilities: Attention to detail, good communication skills, and the ability to work well in a team environment. Ability to read and interpret technical drawings, and familiarity with quality control processes. Ability to work independently with minimal supervision and as part of a team. Ability to read, write, and understand basic English\/Spanish to interpret\/follow safety guidelines and work instructions. Good communication and interpersonal skills. Reliable and punctual with a strong work ethic. Physical Requirements: Ability to stand, walk, bend, stoop, kneel, crouch, and climb for extended periods. Ability to lift, push, and pull objects weighing up to [e.g., 50 pounds] regularly. Ability to work in various environmental conditions common to a manufacturing facility (e.g., varying temperatures, noise levels, potential for dust\/debris, wet floors). Manual dexterity and hand\-eye coordination for operating equipment and handling supplies. Benefits Benefits: Allied employees will be eligible for the Allied benefit package 1st day of the month following 60 days. [Staffing Agency employees will be eligible for the Allied benefit package at the time of conversion. Benefit waiting period will be waived.] Allied Steel Buildings and Allied Fabricators L.L.C. is fully committed to Equal Employment Opportunity and to attracting, retaining, developing and promoting the most qualified employees without regard to their race, gender, color, religion, sexual orientation, national origin, age, physical or mental disability, citizenship status, veteran status, or any other characteristic prohibited by federal or state law. We are dedicated to providing a work environment free from discrimination and harassment, and where employees are treated with respect and dignity. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"654888392","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"Work Experience","uitype":2,"value":"3\-5 years"},{"field Label":"City","uitype":1,"value":"McGregor"},{"field Label":"State\/Province","uitype":1,"value":"Texas"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"76657"}],"header Name":"Lead Quality Control Inspector","widget Id":"**********00072311","awli IntegId":"urn:li:organization:1199371","is JobBoard":"false","user Id":"**********05813003","attach Arr":[],"awli ApiKey":"78sohkufytf6fn","custom Template":"3","awli HashKey":"ed57a4faa58425c862be211f8b090878fe81fde10c6e73e135e2fb62b18baec909e67ab0b99e4bc89afadfe7bfb4d25e6599785d2f5cd**********5646aea9e","is CandidateLoginEnabled":true,"job Id":"**********09134132","FontSize":"12","location":"McGregor","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"a4mvzbc0a728d4dd242c391b535719adca2ab"}

Imagine your career taking you to the depths of innovation and the heights of impact. Our people enable continuous progress. Their commitment, collective expertise, and unique capabilities are the engine room behind SBM Offshore's True. Blue. Transition. - shaping the future of energy, and beyond. About Us: SBM Offshore is the world's deepwater ocean-infrastructure expert. Our work is already resulting in cleaner, more efficient energy production. True. Blue. Transition. is our promise to enable that into the future while at the same time using our expertise to support new and existing markets in the blue economy. It starts with Advancing our Core: continuing to advance the decarbonization of traditional energy production. While Pioneering More: helping to enable the energy transition and using our unique capabilities in ocean infrastructure to support more industries to grow sustainably. Sharing our experience for a better blue tomorrow. Purpose * As Lead Inspection Coordinator, you lead activities to ensure that all equipment, materials, and processes meet industry standards and regulatory requirements. This involves planning, coordinating, and overseeing inspection activities to ensure compliance and safety. Responsibilities * · Inspection Planning: You develop and lead the implementation of inspection plans and schedules based on project requirements and regulatory standards. * · Coordination: You manage the coordination with internal teams, third-party inspectors, and regulatory bodies to facilitate inspection activities. * · Documentation: You maintain and lead the maintenance of comprehensive records of inspection reports, certificates, and non-conformance reports. * · Compliance Monitoring: You ensure all inspections comply with industry standards, company policies, projects requirements and regulatory requirements. * · Issue Resolution: You lead the identification, documentation, and facilitation of the resolution of non-conformances or quality issues. * · Communication: You provide regular updates to the project management team, quality assurance teams, and other stakeholders on inspection status and findings. * · Vendor Liaison: You work with suppliers and contractors to ensure their inspection processes meet project standards. * · Training: You conduct training sessions to the inspection teams on inspection protocols and quality standards' project specifics. * · Mentoring: you mentor and monitor the inspection coordinators' team and support their activities as needed. Education * Bachelor's degree in engineering, quality management, or a related technical field, along with relevant certifications in inspection or quality assurance. Experience * · Proven track-record in leading inspection coordination activities in the oil and gas or similar industry. * · Strong knowledge of industry standards and regulatory requirements. * · Excellent organizational and time-management skills. * · Excellent communication and interpersonal abilities. * · Knowledge of inspection management software and Microsoft Office Suite. * · Attention to detail and problem-solving skills. * · Ability to work under pressure and meet tight deadlines. Functional Competencies Expediting Analytics and reporting Quality Control Plans Regulatory Management Inspection, testing, commissioning and monitoring SBM Product Knowledge Purchasing Tools and Processes Package Management Third parties relation management GENERAL INFORMATION SBM Offshore N.V. is a listed holding company that is headquartered in Amsterdam. It holds direct and indirect interests in other companies that collectively with SBM Offshore N.V. form the SBM Offshore Group ("the Company"). For further information, please visit our website at ******************** The companies in which SBM Offshore N.V., directly and indirectly, owns investments are separate entities. SBM Offshore is proud to be an Equal Employment Opportunity and Affirmative Action employer. SBM Offshore does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

The Mechanical Quality Control Inspector conducts mechanical inspections, ensuring adherence to quality standards, reviewing and documenting quality procedures, identifying and addressing non-conformities, analyzing data to detect potential issues, and implementing corrective actions to maintain product quality throughout the manufacturing process, all while focusing on safety and regulatory compliance. Schedule: 4 weeks ON 2 weeks OFF * 6 days per week, 10 hours per day * 60 hour per week, opportunity for more * Flexibility for special occasions, family needs, or other accommodations is available. Work Location: Watford City, North Dakota Workplace Benefits: * Overtime Guaranteed * Medical Insurance (Individual and Family) * Dental Insurance * Vision Insurance * 401k with Company Match * Accidental Death and Dismemberment (Voluntary) * Life Insurance * Employee Assistance Program Licensing Information and Requirements: * Must hold a valid AWS "CWI" Certified Welding Inspector License Essential Job Functions: * On-site inspection of structural and mechanical welding practices * Maintaining detailed inspection reports, recording data, and documenting any non-conformances found during inspection. * Investigate and address non-conformities, discrepancies, or deficiencies promptly. * Identifying and reporting defects or deviations from specifications, initiating corrective actions, and following up to ensure issues are being resolved. * Inspect the production quality to establish requirements are being met. * Verify work is in place according to drawing and specifications. * Record and document all deviations from original scope. * Notify management of all discrepancies found. * Other duties as assigned. Required Minimum Qualifications: * High School Diploma, or Equivalent * Two (2) years' heavy mechanical industrial experience required. * Current and valid driver's license, with clean driving record * Proven fluency with computers, including ability to learn new software. Post Job Offer Requirements: * Take and pass a pre-employment drug test and background check. Knowledge, Skills & Abilities Required: * Strong understanding of mechanical principles, welding procedures, and engineering practices * Proficiency in reading and interpreting blueprints and technical drawings * Expertise in using various measuring tools and testing equipment. * Knowledge of quality control methodologies and documentation practices * Excellent attention to detail and ability to identify defects. * Effective communication skills to effectively report quality issues. * Ability to set and balance priorities to complete projects on time. * Ability to make decisions and recommend appropriate course of action in demanding situations. Physical Demand/Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the incumbent is required to talk, hear, and see. * The incumbent frequently is required to stand, stoop, kneel, crouch, climb, balance, walk, and sit. * The incumbent must frequently lift and/or move up to 25 pounds and push/pull up to 50 pounds. * Visual acuity must be adequate to perform all required tasks in a safe manner. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * The noise level in the work environment is usually loud and may require use of ear plugs on occasion. * Work is conducted outside at a job site/field site that may have inclement weather conditions. * The incumbent is exposed to moving mechanical parts, vehicles, and equipment. * The employee is required to work and stay on site during the work rotation and must comply with all Company and Client policies. Who Delta Is: * Delta Constructors provides comprehensive construction, maintenance, and project management services across North America, specializing in both brownfield and greenfield projects for industries such as oil and gas, mining, renewable energy, and infrastructure. Committed to safety, quality, and efficiency, the company fosters strong client relationships, continuously exceeding expectations through skilled teams, lean practices, and a culture of excellence. * To learn more visit: ********************************** Disclaimer: The above job description covers the principal duties and responsibilities of the job. The description shall not however, be construed as a complete job listing of all duties, which may be required from day-to-day. Compensation is dependent upon proven qualifications.

The Quality Completions Inspector is the person who conducts the systems completion walk downs and supports Completions on punch list items, walk downs, and engineering changes. This is a skilled position with detailed knowledge of their specific craft and job specifications. This person will be working with QC, document controls, and the craft to make sure items in the field are installed per drawing and specification. Essential Skills, Knowledge, and Abilities: Demonstrated Industrial Construction experience Organization and time management Good decision-making abilities Able to troubleshoot and come up with solutions Ability to work with others - team player Good communication skills with co-workers and subordinates Construction and commissioning knowledge Preferred Qualifications: Bachelor's degree in a construction or technology related field Prior turnover experience Prior commissioning experience #LI-KS1 Qualifications: 3+ years' experience as a journeyman 3 years industrial construction experience 2-3 years in Petrochemical or Oil & Gas Computer Competency (Microsoft Office), Completions Database experience General discipline competencies with Civil, Underground Work, Structural, and Buildings Discipline Specific Qualifications: Mechanical Piping Mechanical Stationary Equipment Rotating Equipment Welding I&E Instrumentation Electrical Job functions: Walk down systems and subsystems for completeness and identify any discrepancies Identify any field installed Vs. drawing differences Verify completed punch list items Participate in client and commissioning walk downs

Herzog Contracting Corp. is currently seeking a Quality Control Inspector in San Antonio, TX to join our team. Duties and Responsibilities: . * The candidate is responsible for controlling the quality of all construction works under the direction of the QC Manager. Dedicated full time to the construction project, with no other responsibilities other than quality related duties. Also responsible for the construction quality control documentation including reports, completed submittals and approved shop drawings in a controlled and secure documentation system. * Additionally, the candidate is expected to identify and implement quality management needs beyond ISO 9001:2015 on a project-specific basis as needed. * The candidate will be responsible for conducting daily inspections and surveillances of construction and testing activities and suppliers/manufacturers in accordance with contracts and specifications requirements. The candidate must provide examples of similar experiences and accomplishments and demonstrate effective communication skills.Regular and consistent engagement, participation and promotion of Herzog's Culture and its essential behaviors are a requirement for this position. * Regular and consistent engagement, participation and promotion of Herzog's Culture and its essential behaviors are a requirement for this position. * Regular and predictable attendance and punctuality are a requirement for this position. * Other duties as assigned. Qualifications: * Four-year college degree or equivalent field experience * 5 years of experience in heavy civil and/or track construction, in inspection is preferred. * Certified Construction Quality Control Manager (CQCM) with Corps of Engineers preferred. * Familiar with the Three-Phase Program of inspection. * Knowledge of company quality control program applicable to work. * Ability to determine acceptability and rejectability of work base on assigned criteria. * Previous quality control inspection experience. * Familiarity and knowledge of codes and standards applicable to specific construction activity is expected. QC inspection certifications from DOT, ASQ and other recognized training institutions are preferred * The candidate is also expected to be willing to travel and relocate to fulfill the position's requirements. * Ability to write detailed reports and demonstrated computer skills necessary to access, research, and document results in the electronic medium are expected. * Valid driver's license and favorable driving record. * Strong written and verbal communication skills. * Bilingual is a plus. Pre-Employment Requirements: * Subject to pre-employment background check and motor vehicle report review. * Maintain valid driver's license and endorsements as required per position. * Subject to pre-employment physical, medical evaluation, and drug screen due to the safety sensitive nature of this position. * Successfully complete and maintain any required safety certification and testing on an annual basis. Physical Requirements: The physical demands described below must be met by an employee to successfully perform the essential job functions of this role. This is a non-exhaustive overview of the physical requirements of this job. * Able to walk on uneven surfaces * Occasionally ascend/descend step ladders and/or stairs * Regularly sit and stand for an extended period of time. * Regularly kneel, bend, and squat * Must successfully pass color/vision examinations as required by the position. * Must be able to hear and distinguish auditory signals. * Able to work in conditions with loud noise; work on/around heavy/moving machinery. * Able to work outdoors in all weather conditions (hot, cold, rain, snow, and sleet). Safety: * Herzog is nationally recognized for its excellent corporate safety record which results from all employees at all levels, in all positions adhering to established policies and procedures. Reporting any and all safety violations to your immediate supervisor is a prerequisite for continued employment. Safety diligence by all results in a safe work environment for all. Benefits: * Herzog offers a robust benefits package including medical and dental coverage. The plans are specific to projects and locations. Why Herzog: Founded in 1969, Herzog is headquartered in St. Joseph, Missouri, with a satellite office in Fort Worth, Texas. Over the course of our 50+ year history, Herzog has become a national leader in the construction, operations and maintenance of commuter rail, light rail, streetcar, and freight rail projects. We believe our culture is at the heart of our existence. It is that belief which empowers every member of our professional family to act with purpose and passion as they advance their career throughout their personal pursuit of excellence. Backed by over five decades of experience, Herzog delivers exceptional customer service and elite results. Our success is the outcome of our relentless pursuit of excellence, our passion for our customers, safety without compromise, and a deep-rooted belief in the power of team. We invite you to join us on our journey to excellence as we work to be better today than yesterday and better tomorrow than today. It is the policy of Herzog Contracting Corp. to provide equal opportunity in employment for all qualified individuals regardless of race, color, religion, ethnicity, national origin, ancestry, disability, medical condition, age, citizenship, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, genetic information, military status, veteran status, and any other characteristic protected by law.

The Quality Completions Inspector is the person who conducts the systems completion walk downs and supports Completions on punch list items, walk downs, and engineering changes. This is a skilled position with detailed knowledge of their specific craft and job specifications. This person will be working with QC, document controls, and the craft to make sure items in the field are installed per drawing and specification.

ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Works in a safe manner following all safety policies while performing job duties. Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. Assists in maintaining and keeping tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS Must be 18 years of age. This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. Bilingual Spanish preferred. Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. Excellent written and oral communication skills required. Ability to handle multiple projects while maintaining attention to detail. Ability to work in a team, to be trained, and take direction. Flexible to work in a fast paced, changing environment. Not afraid to get dirty and handle tools/equipment daily. Must be able to pass a pre-employment drug screen.

ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES * Works in a safe manner following all safety policies while performing job duties. * Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. * Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. * Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. * Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. * Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. * Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. * Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. * Assists in maintaining and keeping tools, machinery, and work area clean and organized. * Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS * Must be 18 years of age. * This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. * High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. * Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. * Bilingual Spanish preferred. * Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. * Excellent written and oral communication skills required. * Ability to handle multiple projects while maintaining attention to detail. * Ability to work in a team, to be trained, and take direction. * Flexible to work in a fast paced, changing environment. * Not afraid to get dirty and handle tools/equipment daily. * Must be able to pass a pre-employment drug screen.

Who We Are: Allied Steel Buildings is a global manufacturer of steel buildings and structural steel solutions, offering best\-in\-class design, engineering and project management seamlessly integrated into our clients' processes. Since 2003, we have successfully delivered over 5,500 metal building projects across 72 countries, delivering building solutions for diverse industries, from data centers, sports & recreational facilities, aviation, manufacturing, equestrian & agricultural to commercial buildings and warehousing worldwide. We have 5 locations including our two manufacturing facilities, located in Texas and Spain, utilize cutting\-edge technology, including robotics and automation, to ensure our manufactured materials set a new standard for quality in the industry. Allied Culture: At Allied, we believe great service matters from the start and finish of everything we do. Going the distance for our clients begins with taking care of our team members. They are our most important asset. We invest in their continuous development, and recognize their contribution to our success. Great work starts with creating great work environments, promoting collaboration for a team dedicated to creating value worldwide. The Allied Team is highly resourceful, innovative, and competent with extensive experience. Our culture is open, accessible, adaptive and flexible, offering work\-life balance, and empowering our people, because everyone’s voice matters. We promote “we” over “me” and solutions oriented creative thinking. It’s the Allied way. Job Summary: This role ensures the integrity of steel fabrication processes and final products by adhering to the Quality Management System (QMS). This role is responsible for conducting inspections, maintaining document control, and verifying product quality. Ability to work full\-time onsite at the McGregor, TX facility, with a proactive mindset focused on efficiency and problem\-solving in a multinational setting. Responsibilities: Perform visual inspections of in\-process and finished structural steel components, such as beams, columns, plates, and clips, ensuring they meet quality standards and project specifications. Evaluate welds for compliance with Quality Management Systems (QMS) standards and identify any non\-conformities for rework or further testing. Use non\-destructive testing (NDT) methods, such as liquid penetration testing, when necessary to detect defects. Document inspection results, including corrections, and maintain logs for final QC reports and Quality Dossiers. Ensure that parts and assemblies are properly marked with legible identification at each stage of production. Use micrometers and tape measures to ensure that fabricated parts and assemblies conform to design specifications. Mark non\-conforming items and communicate necessary repairs. Oversee dimensional control processes that align with the production workflow. Verify that received materials meet procurement standards and that mill certifications with heat numbers are appropriately assigned. Ensure parts and assemblies are correctly identified throughout production. Manage and discard materials that do not comply with the QMS. Scan and upload documents into facility software systems. Use mobile wireless devices to track parts and products according to QMS protocols. Maintain updated drawings and distribute revisions to production stations, removing outdated versions. Record and communicate inspection data, including findings and photos, to management. Verify that the tools and equipment used in production are calibrated and in good working condition. Work with team members to identify quality improvement opportunities. Participate in meetings to discuss QC processes and contribute to continuous improvement efforts. Follow all safety protocols and ensure a safe working environment. Use personal protective equipment (PPE) as required. Attend safety meetings and stay compliant with workplace safety standards. Adhere strictly to all company safety policies, procedures, and government regulations (e.g., OSHA standards). Properly use all required Personal Protective Equipment (PPE) at all times. Promptly report any accidents, injuries, unsafe conditions, or potential hazards to a supervisor. Actively participate in all mandatory safety training, drills, and development programs to improve skills and knowledge. Work cooperatively with team members to achieve production goals and departmental objectives. Adhere to all company policies, procedures, and codes of conduct. Monitor own work to ensure it meets quality specifications. Perform other duties as assigned. Work Schedule: Monday\-Friday, 1st Shift (6:00am \- 2:00pm), 2nd Shift (2:00pm \- 10:00pm), 3rd Shift (10:00pm \- 6:00am) Depending on production needs, some weekend work may be required. Requirements Qualifications: Experience: Minimum of 4 years of experience in quality control inspection, ideally in structural steel fabrication. Experience with AISC, AWS, or CWB certifications is a plus. Certifications: AWS or ISO certifications are desirable. NDT certification (Level 1, 2, or 3) must be obtained within six months of hire. Education:A technical degree in welding, steel materials, or a related field is preferred. Attention to detail, good communication skills, and the ability to work well in a team environment. Ability to read and interpret technical drawings, and familiarity with quality control processes. Ability to work independently with minimal supervision and as part of a team. Ability to read, write, and understand basic English\/Spanish to interpret\/follow safety guidelines and work instructions. Good communication and interpersonal skills. Reliable and punctual with a strong work ethic. Physical Requirements: Ability to stand, walk, bend, stoop, kneel, crouch, and climb for extended periods. Ability to lift, push, and pull objects weighing up to [e.g., 50 pounds] regularly. Ability to work in various environmental conditions common to a manufacturing facility (e.g., varying temperatures, noise levels, potential for dust\/debris, wet floors). Manual dexterity and hand\-eye coordination for operating equipment and handling supplies. Benefits Allied employees will be eligible for the Allied benefit package 1st day of the month following 60 days. Staffing Agency employees will be eligible for the Allied benefit package at the time of conversion. Benefit waiting period will be waived. Allied Steel Buildings and Allied Fabricators L.L.C. is fully committed to Equal Employment Opportunity and to attracting, retaining, developing and promoting the most qualified employees without regard to their race, gender, color, religion, sexual orientation, national origin, age, physical or mental disability, citizenship status, veteran status, or any other characteristic prohibited by federal or state law. We are dedicated to providing a work environment free from drug, discrimination and harassment, and where employees are treated with respect and dignity. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"654888392","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"Work Experience","uitype":2,"value":"3\-5 years"},{"field Label":"City","uitype":1,"value":"McGregor"},{"field Label":"State\/Province","uitype":1,"value":"Texas"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"76657"}],"header Name":"Quality Control Inspector","widget Id":"**********00072311","awli IntegId":"urn:li:organization:1199371","is JobBoard":"false","user Id":"**********05813003","attach Arr":[],"awli ApiKey":"78sohkufytf6fn","custom Template":"3","awli HashKey":"ed57a4faa58425c862be211f8b09087887f5fd08066a0e30984a7ebbdbc6d83d72b0e92e208e953d4ce67e20176088e5c031544ff14fc34b36d18190a1a1ef9b","is CandidateLoginEnabled":true,"job Id":"**********09281005","FontSize":"12","location":"McGregor","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"a4mvzbc0a728d4dd242c391b535719adca2ab"}

Who We Are: Allied Steel Buildings is a global manufacturer of steel buildings and structural steel solutions, offering best\-in\-class design, engineering and project management seamlessly integrated into our clients' processes. Since 2003, we have successfully delivered over 5,500 metal building projects across 72 countries, delivering building solutions for diverse industries, from data centers, sports & recreational facilities, aviation, manufacturing, equestrian & agricultural to commercial buildings and warehousing worldwide. We have 5 locations including our two manufacturing facilities, located in Texas and Spain, utilize cutting\-edge technology, including robotics and automation, to ensure our manufactured materials set a new standard for quality in the industry. Allied Culture: At Allied, we believe great service matters from the start and finish of everything we do. Going the distance for our clients begins with taking care of our team members. They are our most important asset. We invest in their continuous development, and recognize their contribution to our success. Great work starts with creating great work environments, promoting collaboration for a team dedicated to creating value worldwide. The Allied Team is highly resourceful, innovative, and competent with extensive experience. Our culture is open, accessible, adaptive and flexible, offering work\-life balance, and empowering our people, because everyone’s voice matters. We promote “we” over “me” and solutions oriented creative thinking. It’s the Allied way. This is an internal position available only to current team members. If you are interested in this or other opportunities with Allied Steel Buildings or Allied Fabricators LLC , please email your resume and the position you are interested in to *************************** . Job Summary: This role ensures the integrity of steel fabrication processes and final products by adhering to the Quality Management System (QMS). This role is responsible for conducting inspections, maintaining document control, and verifying product quality. Responsibilities: Quality Control: Perform visual inspections of in\-process and finished structural steel components, such as beams, columns, plates, and clips, ensuring they meet quality standards and project specifications. Evaluate welds for compliance with QMS standards and identify any non\-conformities for rework or further testing. Use non\-destructive testing (NDT) methods, such as liquid penetration testing, when necessary to detect defects. Document inspection results, including corrections, and maintain logs for final QC reports and Quality Dossiers. Ensure that parts and assemblies are properly marked with legible identification at each stage of production. Dimensional Accuracy: Use micrometers and tape measures to ensure that fabricated parts and assemblies conform to design specifications. Mark non\-conforming items and communicate necessary repairs. Oversee dimensional control processes that align with the production workflow. Traceability: Verify that received materials meet procurement standards and that mill certifications with heat numbers are appropriately assigned. Ensure parts and assemblies are correctly identified throughout production. Manage and discard materials that do not comply with the QMS. Document Control: Scan and upload documents into facility software systems. Use mobile wireless devices to track parts and products according to QMS protocols. Maintain updated drawings and distribute revisions to production stations, removing outdated versions. Record and communicate inspection data, including findings and photos, to management. Ongoing Maintenance: Verify that the tools and equipment used in production are calibrated and in good working condition. Work with team members to identify quality improvement opportunities. Participate in meetings to discuss QC processes and contribute to continuous improvement efforts. Safety Compliance: Follow all safety protocols and ensure a safe working environment. Use personal protective equipment (PPE) as required. Attend safety meetings and stay compliant with workplace safety standards. Adhere strictly to all company safety policies, procedures, and government regulations (e.g., OSHA standards). Properly use all required Personal Protective Equipment (PPE) at all times. Promptly report any accidents, injuries, unsafe conditions, or potential hazards to a supervisor. Actively participate in all mandatory safety training, drills, and development programs to improve skills and knowledge. Work cooperatively with team members to achieve production goals and departmental objectives. Adhere to all company policies, procedures, and codes of conduct. Monitor own work to ensure it meets quality specifications. Perform other duties as assigned. Work Schedule: Monday\-Friday, 1st Shift (6:00am \- 2:00pm), 2nd Shift (2:00pm \- 10:00pm), 3rd Shift (10:00pm \- 6:00am) Depending on production needs, some weekend work may be required. Requirements Qualifications: Experience: Minimum of four years of experience in quality control inspection, ideally in structural steel fabrication. Experience with AISC, AWS, or CWB certifications is a plus. Certifications: AWS or ISO certifications are desirable. NDT certification (Level 1, 2, or 3) must be obtained within six months of hire. Education: A technical degree in welding, steel materials, or a related field is preferred. Attention to detail, good communication skills, and the ability to work well in a team environment. Ability to read and interpret technical drawings, and familiarity with quality control processes. Ability to work independently with minimal supervision and as part of a team. Ability to read, write, and understand basic English\/Spanish to interpret\/follow safety guidelines and work instructions. Good communication and interpersonal skills. Reliable and punctual with a strong work ethic. Physical Requirements: Ability to stand, walk, bend, stoop, kneel, crouch, and climb for extended periods. Ability to lift, push, and pull objects weighing up to [e.g., 50 pounds] regularly. Ability to work in various environmental conditions common to a manufacturing facility (e.g., varying temperatures, noise levels, potential for dust\/debris, wet floors). Manual dexterity and hand\-eye coordination for operating equipment and handling supplies. Benefits Allied employees will be eligible for the Allied benefit package 1st day of the month following 60 days. [Staffing Agency employees will be eligible for the Allied benefit package at the time of conversion. Benefit waiting period will be waived.] Allied Steel Buildings and Allied Fabricators L.L.C. is fully committed to Equal Employment Opportunity and to attracting, retaining, developing and promoting the most qualified employees without regard to their race, gender, color, religion, sexual orientation, national origin, age, physical or mental disability, citizenship status, veteran status, or any other characteristic prohibited by federal or state law. We are dedicated to providing a work environment free from drug, discrimination and harassment, and where employees are treated with respect and dignity.​ "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"654888392","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"Work Experience","uitype":2,"value":"3\-5 years"},{"field Label":"City","uitype":1,"value":"McGregor"},{"field Label":"State\/Province","uitype":1,"value":"Texas"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"76657"}],"header Name":"Quality Control Inspector","widget Id":"**********00072311","awli IntegId":"urn:li:organization:1199371","is JobBoard":"false","user Id":"**********05813003","attach Arr":[],"awli ApiKey":"78sohkufytf6fn","custom Template":"3","awli HashKey":"ed57a4faa58425c862be211f8b090878d5a2a85cfa04d5263dda8f16f4bc6f9493dec39fdaf59bbfb045ff203e200d3fa824ac1f93745a87b62fc6d30069ae3f","is CandidateLoginEnabled":true,"job Id":"**********09134192","FontSize":"12","location":"McGregor","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"a4mvzbc0a728d4dd242c391b535719adca2ab"}

**About M.C. Dean** M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. **Why Join Us?** Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. The **Quality Control Inspector 1** is responsible for following the M.C. Dean Quality Control (QC) Program to achieve and verify quality expectations for a durable and reliable installation. The Quality Control Officer is responsible for performing field inspections to ensure work is in compliance with all safety policies and procedures. Responsibilities + Conduct inspections to ensure compliance and conformance with project or contract specifications + Conduct inspections in accordance with Quality Control Plan + Conduct inspections to ensure adherence to applicable legal requirements + Confer with Quality Assurance, Manager as appropriate + Read blueprints and specifications + Monitor operations to ensure that they meet specifications + Recommend adjustments to the assembly or installation process + Inspect, identify, and submit material, components, or products for testing and measurement + Operate electronic inspection equipment and software + Document approval or rejection of inspected material, components, or products + Identify for removal all components, products and materials that fail to meet specifications + Report inspection and test data and quantities inspected + Participate in the Preparatory Meeting for each definable feature of work to review pertinent sections of the plans and specs requirements with the foreman supervising the work. + Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures + Participate in Follow-up Inspections continuously to insure professional workmanship, quality and safety in accordance with contract documents. + Perform inspections on all work performed in detail, efficiently, and in conjunction with Owner/QC. + Collect data, analyze for continuous improvement, and share with project team weekly. + Participate in the daily Operational Risk Management (ORM) meetings ensuring Quality items/issues for the scope of the work are discussed and present at least 2-3 quality tips of the day relevant to the scope of work. + Document daily QC reports + Understand and follow all applicable quality system procedures, performing all assigned responsibilities outlined in the QMS. + Perform Receiving (REC), First Article (FAI), In-Process (IP) and Final Inspections (FI) on electrical and mechanical assemblies visually and/or with inspection equipment. + Immediately notify operators, or supervision of any non-conformances in products + Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. + Assist in the training of operators and provide guidance. + Assist in the problem-solving process. + Participate in the Daily ORM work briefings to represent the Quality Portion. + Assist in root cause, corrective and preventive action development for systemic issues. + Advise appropriate party of any corrective action to be taken. + Coordinate with supervisor to ensure all shifts are covered appropriately in case of absence of an inspector. Qualifications **Experience / Education Required:** + Associates Degree in Technical Discipline (may be substituted for quality related experience) + At least 4 years hands-on experience in construction, estimation, and/or quality control activities. + To possess or have the ability to obtain a state issued Journeyman License within 6 months of hire + Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards + Experience with receiving, production, shipping and quality processes + Excellent communication skills (written, and verbal) + Strong attention to details, highly organized and computer literate + Ability to work well in a fast-paced manufacturing environment **We offer an excellent benefits package including:** + A competitive salary + Medical, dental, vision, life, and disability insurance + Paid-time off + Tuition reimbursement + 401k Retirement Plan + Military Reserve pay offset + Paid maternity leave **Abilities:** + Exposure to computer screens for an extended period of time + Sitting for extended periods of time + Reach by extending hands or arms in any direction + Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard + Listen to and understand information and ideas presented through spoken words and sentences + Communicate information and ideas in speaking so others will understand + Read and understand information and ideas presented in writing + Apply general rules to specific problems to produce answers that make sense + Identify and understand the speech of another person

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-IF1

ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES * Works in a safe manner following all safety policies while performing job duties. * Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. * Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. * Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. * Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. * Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. * Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. * Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. * Assists in maintaining and keeping tools, machinery, and work area clean and organized. * Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS * Must be 18 years of age. * This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. * High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. * Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. * Bilingual Spanish preferred. * Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. * Excellent written and oral communication skills required. * Ability to handle multiple projects while maintaining attention to detail. * Ability to work in a team, to be trained, and take direction. * Flexible to work in a fast paced, changing environment. * Not afraid to get dirty and handle tools/equipment daily. * Must be able to pass a pre-employment drug screen.

ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Works in a safe manner following all safety policies while performing job duties. Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. Assists in maintaining and keeping tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS Must be 18 years of age. This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. Bilingual Spanish preferred. Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. Excellent written and oral communication skills required. Ability to handle multiple projects while maintaining attention to detail. Ability to work in a team, to be trained, and take direction. Flexible to work in a fast paced, changing environment. Not afraid to get dirty and handle tools/equipment daily. Must be able to pass a pre-employment drug screen.

Job Posting Start Date 12-23-2025 Job Posting End Date 02-27-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Quality Control Inspector located in Dallas, Texas. Reporting to the Quality Assurance Manager, the Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process, with a focus on mechanical and wiring. Other phases include inspections of raw materials, in-process, and final products. Products and materials are related to switchgear, relay panels, substation enclosers, sheet metal, welding, paint and other components. Shift: 6:00 AM - 2:30 PM Responsibilities: * Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications * Verifies and documents the condition and count of all items unloaded from trucks and trailers; checks against suppliers count and immediately reports discrepancies. * Uses observation and testing to identify faults in materials and manufacturing process * Documents inspection results by completing inspection reports, logs, and checklists * Documents corrective action requests and inputs data into corrective action database. * Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products * Maintain quality records as needed * Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. * Perform other related duties as assigned Qualifications: * High School Diploma or equivalent * 1-3 years' experience of quality inspections in fabrication/manufacturing environment, particularly in welding * Thorough understanding of the product and/or process being inspected (welding) * Ability to read blueprints, specifications, and technical documents * Excellent written and verbal communication skills * Ability to handle multiple projects while maintaining attention to detail with the task at hand * Demonstrated proficiency with the ability to safely operate powered equipment (forklift, reach truck, etc.) * Proficient in Microsoft Physical Requirements: * Prolonged periods standing and performing repetitive tasks. * Must be able to lift push and/or pull up to 50 pounds at times. * Dexterity and accuracy as needed to operate testing equipment or gauges. * Must be able to bend, stretch, kneel, and squat to perform inspections. * Must be able to traverse production facility to conduct inspections. * Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: * Full range of medical, dental, and vision plans * Life Insurance * Short-term and Long-term Disability * Matching 401(k) Contributions * Vacation and Paid Sick Time * Tuition Reimbursement Job Category Quality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).