Watco jobs in Baton Rouge, LA

Start a Watco Career and Discover the Difference Keep the world's supply chain moving. That's what the Watco team does every day at our short line railroads, switching sites, terminals, ports, and logistics hubs. Whether you're at one of these locations or in a support-services role, there's one thread that ties everyone together. We're all on the same team. One Watco Here's what you can expect from Watco: Outstanding culture recognized by Forbes and Newsweek Competitive compensation and benefits Paid on-the-job training with peer trainers Leadership and development programs offered through Watco University Career advancement opportunities Starting Pay: $18.00 per hour Schedule: M-F 6:30 AM - 3:00 PM - Must be available for overtime and weekend work as needed General Purpose Watco moves any commodity, and at this site, we handle primarily petroleum coke products. As a Dock Hand, you will assist the Operators with removing and resetting barge covers, climbing in and out of barges, and assist with securing and moving barges as needed. This position also requires operating a skid steer to move materials. Position Description Must communicate to all crew members any special instructions for the day and ensure all Team Members complete the job safely. Must be flexible and able to work any shift. This is a full time outside job in all weather conditions. Operate in a manner where SAFETY and ENVIRONMENT are of the highest importance. Operate within Watco's Customer First Foundation Principals with the customer, safety and the team's goals always a priority. Ability to understand Watco Transload and Intermodal safety rules and regulations. Learn from directions, observations, and mistakes and apply procedures using good judgement. Perform structural inspections as required. Prepare equipment for product transfer. Complete all applicable documentation, inspections and recordkeeping. Ability to pass Safety Course administered by customer. Perform all work in compliance with Company standards, procedures, and regulatory requirements. Snow/weed removal as necessary. Other duties as assigned. Ability to use ladders to access barges. Ability to work near water. Remove and reset barge covers Secure and assist in moving barges as needed Communicate with other team members using two-way radio Ability to pass training and required testing A Valid Drivers License is preferred for this position Machines, Tools, Special Equipment, Personal Protective Equipment Used Forklift, power tools, hydraulic equipment, power drills, and basic hand tools (i.e., wrench, screwdriver, sockets, measuring tape, etc.) PPE: hard hat, safety glasses, splash goggles, face shield, gloves, steel-toed boots, fire retardant clothing, full face respirator.

Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Pennsauken, NJ For More Info Call Jason or Text "Pennsauken" to ************ Hear it from a Torque Mobile Mechanic Technician Here: ************************************ Technician Positions Pay Each Week Hourly Pay: $43.00 per hour Ability to earn additional monthly performance incentive Schedule: Flexible 40-hour work week (weekend premiums apply) Fuel Card and Company Cell Phone provided For mobile technicians, work site service vehicle will be provided Grow with Ryder: This position provides additional training to level up. We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. For More Info Call Jason or Text "Pennsauken" to ************ At Ryder, we offer outstanding benefits: Generous Paid Time Off Medical, Dental and Vision Insurance effective 30 days from hire date Life Insurance and Disability Insurance Options 401K Savings Plan with Ryder matching contributions Discount on purchase of Ryder Common Stock Employee Discounts on Automotive, Mobile plans, Travel and Hotels Accredited Tech School Tuition Reimbursement PPE & Uniforms provided at no cost Paid Job training and development Employee & Customer Referral Bonus program Apply today and see why a job with Ryder is what you've been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers:************************************************ EEO/AA/Female/Minority/Disabled/Veteran Requirements High school diploma or equivalent preferred Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred Basic tools, required Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including: Routine preventative maintenance, which should include oil changes, brake and tire work Diagnostics and repairs, including AC, electrical systems Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs Four (4) years or more Relevant work experience, preferred NonCommercial Driver License CLASS E, preferred Valid Commercial Driver License (CDL) CLASS A, preferred Other State driver's license, as required Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02 Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents Must be able to drive Ryder vehicles Ability to: Understand and adhere to Company policies in all areas Complete repair orders with the Company established systems Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors) Work independently and as a member of a team Prioritize workload Proven hands-on mechanic, customer service, and account management skills Demonstrates customer service skills Strong verbal and written communication skills Flexibility to operate and self-driven to excel in a fast-paced environment Self-starter and self-sufficient approach Capable of multi-tasking, highly organized, with excellent time management skills Detailed oriented with excellent follow-up practices Entrepreneurial spirit Preventive Maintenance (PM230&PM298) within 90 Days Brakes-Air (BA220&BA298) within 90 Days Brake mechanics/inspectors FMCS 396.25 Hydraulic Brake (BH220&BH298) where appropriate within 90 Days Tire & Wheel TW220 within 90 Days CF609 & A/C trained and qualified (AC220&AC298) within 180 Days HD electrical - DR208 within 90 Days Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix) This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must: Pass a Ryder Drug Test Pass a DOT physical Pass a Ryder road test Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns Performs facility maintenance duties Interacts with customers/drivers to properly determine nature of complaint once assigned a task Instructs and advises other technicians regarding maintenance repair procedures and diagnostics Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to: A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers Driveline: Lubricate drive line; Inspect components for wear or damage Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298) Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents Performs other duties as assigned. Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements. Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 2 months ago (10/21/2025 8:52 AM) Requisition ID 2025-190127 Location (Posting Location) : State/Province NJ Location (Posting Location) : City PENNSAUKEN Location (Posting Location) : Postal Code 08110 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Paramedic Full-Time 25K sign-on bonus with relocation assistance option FULL-TIME, 2-YR commitment Conditions Apply We're hiring Paramedics that are passionate about delivering compassionate, high-quality service and basic, as well as advanced, patient care to our customers. Responsibilities: Assess each call situation to determine the best course of action while working with progressive Paramedic protocols. Utilize your Paramedic skills on medical equipment and procedures including defibrillator, EKG monitor, oxygen and suction devices, and intravenous fluids to provide advanced medical care. Communicate with patients and loved ones to provide information and assurance that care is being given. Act as Paramedic team leader and take responsibility for the scene and unit management as needed. Drive the ambulance on 911 responses. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow Paramedics. Other Responsibilities: Participate in community programs to maintain AMR image and establish strong community relations. Minimum Required Qualifications: (Must have proper certifications) High school diploma or equivalent (GED) WA State Paramedic License or NREMT-P State Driver's License ACLS, PALS Driving record in compliance with company policy Pass Physical Agility Test Some work experience, preferably in healthcare Why Choose AMR? AMR is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Company Benefits: Check out our careers site benefits page to learn more about our benefit options. Pay Range: $77,238.41 - $93,794.55/yr DOE (Based on a Full Time, Non-Exempt position working normal schedule)

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Do you hold a Journeyman Electrician card? Are you licensed with the State of Michigan? Want to make $41.38 Per Hour Starting Out with an excellent benefit package? Come learn more about Smurfit Westrock Battle Creek MI Paper Mill! We are looking for Industrial Journeyman Electricians! Required Skills and Experience: Experienced with 480 VAC, 3 phase along with lower voltages. Able to trouble shoot and repair semi-automated production equipment. Experience with trouble shooting and preventive maintenance of large DC and AC motors. Able to effectively use standard electrical test equipment including volt meter, amprobe and megger Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures. Able to read and interpret facility blueprints and equipment technical manuals. Able to perform electrical construction projects and repair. Preferred Skills: Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs. Experience with AC and DC drives in fan, pump, and conveyor applications. Ability to set up AC and DC drives. Experience with HMI touch screens. AutoCAD. Additional Requirements: Able to lift up to 50 pounds. Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed. Willing to work in a tobacco free environment. Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Retirement plan Tuition reimbursement Vision insurance #CareersAtSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Immediate opening for a SOLO Class A CDL Truck Driver and we want the right Trucker to join us in Goodlettsville, TN ************************************* For More Info Call Candace or Text "Goodlettsville" to************ You might be wondering what your paycheck will look like. up to $2500 per week - And it gets better Driver Positions Pay Weekly Solo Miles Pay: $0.62 cents/mile with 2000+ Miles per Week Solo Stops Pay: $27.00 each Stop with 12 Stops per Week Safety Bonus: Pays You $300-$500 Four Times A Year (Every Quarter) Per Diem Pay: $60.00 per night with 1 - 3 nights per Week Paid Onsite training Schedule: Thursday - Monday Start Time: 9:00 PM - 5:00 AM Dispatch Apply Here Today For More Info Call Candace or Text "Goodlettsville" to************ Stop applying to companies that don't have your best interest in mind. We promise transparency and want you to have the actual pay and route details upfront making your decision to join our team easy. Deliver SOLO To: OH, TN, KY, WV, IN, IL, AL & GA Route: Regional, 1-3 nights out per week depending on how much you want to run. Home Every Other Night Tractor Type: Sleepers with APUs / Day Cabs Trailer Type: Reefer 48', 53' Equipment: Pallet Jack Ryder will Train you on all equipment needed to be successful Freight: Assist Palletized- Refrigerated Goods We have all the benefits other carriers do without the wait: UNIFORMS AND BOOT ALLOWANCE PROVIDED Paid Personal Time Off Starts at Day 1 - 80 hours accrued in First Year DO NOT LOSE Paid Personal Time Policy - We encourage you to use Vacation Time earned. Medical, Dental, Vision Start at 30 Days We love our Ryder babies and offer 12 weeks of PAID Maternity Leave Immediate 401k rollover and contributions with company match at one year QualityEmployee Discounts that actually save you Money on Tools, Cars, Hotels Worldwide, Electronics/Appliances, Cell Phones, Travel and more Ryder Drivers are the Captain of the Ship - OUR DRIVERS make decisions to keep themselves and others safe. We protect your job when you do. Click here to see all Ryder Driving Opportunities:*************************** We will buy your truck if you're looking to switch from Owner Operator to a Company Employee Driver, we will help make the switch even easier. For More Info Call Candace or Text "Goodlettsville" to************ We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday EEO/AA/Female/Minority/Disabled/Veteran \#DMW \#driverhbc Requirements Minimum 21 years of age Pass a Ryder Drug Test Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Pass a DOT physical Pass a Ryder road test Provide appropriate CDL and endorsements for the position Must have Class A verifiable experience in a tractor trailer or comparable vehicle: 9 months experience within the past 3 years, OR 2 years' experience within the last 5 years, OR 5 years' experience within the last 10 years Ability to follow written and/or oral instructions Ability to read, interpret and apply laws, rules, regulations policies and/or procedures Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities Ensuring compliance with applicable federal and/or state laws, regulations, and/or agency rules, standards and guidelines Detecting and eliminating or minimizing safety hazards Maintaining accurate records and logs Loading/Unloading freight or assisting in the loading/unloading of freight if required by customer Performs other duties as assigned Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 month ago (11/13/2025 3:37 PM) Requisition ID 2025-191423 Primary State/Province TN Primary City GOODLETTSVILLE Location (Posting Location) : Postal Code 37072 Category Drivers Regional/OTR Solo Employment Type Regular-Full time Travel Requirements Driver Position Code 1000994

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include: Competitive Wages. The anticipated starting pay range for the position is $25 to $30 but is commensurate with skills and related experience, Health/Dental/Vision/Prescription Drug Plan with a company contribution to each, Health Savings Accounts and Flexible Spending Accounts, 401K Retirement Savings Plan: Crown matches 100% of the first 4% of your eligible pay you contribute to the plan. You are always 100% vested in the company matching contributions. Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings, Paid Parental Leave, 9 Paid Holidays, Paid Vacation accrued at a rate based on length of service and position, Paid Sick Leave, Birthday Pay for Non-Exempt employees, Tuition Reimbursement up to $5,250 per calendar year, and much more. EOE Veterans/Disabilities

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Master Electrician Shift: 3rd (11pm-7am) Pay: $44- $50.22/hr Position Summary: Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How you will impact WestRock: Utilize electrical/mechanical skills to maintain machinery Contribute to a collaborative safety culture that drives results Provide rapid response to ensure seamless productivity. What you need to succeed: 2-3 years in trouble shooting industrial electrical control systems down to component level An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase-power, communication devices, industrial / electronic controls, and power transmission systems. A good understanding of hydraulic and pneumatic systems. Able to install and set up both A/C and D/C drives PLC trouble shooting and problem-solving ability with practical, mechanical & electrical aptitude. Must be able to read and interpret both electrical and mechanical drawings. Working knowledge of power transmission equipment and bearings. Basic welding skills preferred but not required. Familiar with pumps, both air and electric. Able to install and trouble shoot basic 3 phase motor control circuits Some knowledge of the various types of sensors and limit switches Familiar with computers and Microsoft software. Strong written and verbal communication skills. Ability to work independently in a mature and professional manner. Ability to work flexible hours, overtime High school diploma or equivalent Military training and or Technical School preferred What we offer: Comprehensive benefits package- including but not limited to medical, dental, vision, 401K, and short-term disability coverage. Corporate culture based on integrity, respect, accountability, and excellence Comprehensive training with numerous learning and development opportunities A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work. The starting range is $44/hr - $50.22h r, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by December 21 2025. #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here . Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

American Medical Response (AMR) Glenwood, IL Firefighter Paramedic Firefighter Paramedic Compensation: $70000 annual salary (based on local Full-time schedule) We're hiring a Firefighter Paramedic with a passion for firefighting and patient care combined with the drive to succeed and deliver high-quality care. Key Responsibilities: Firefighters respond to emergency fire scenes and assist in various fire suppression duties with the appropriate extinguishing agents to the source of the fire. Operates various pieces of fire equipment and gear for fire suppression and control; drives and operates fire apparatus; conducts search and rescue; ventilation and salvage operations. Conduct fire safety, home safety, fire extinguisher and pre-fire planning inspections. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow firefighters and government agencies. Other Responsibilities: Participate in community programs to maintain company image and establish strong community relations. Minimum Required Qualifications: High school diploma or equivalent (GED) State Driver's License State issued (IL) BOF certification State issued or National Registered EMT-P certification Current ACLS certification required if applicant is an EMT-P Current AHA CPR/AED certification Why Choose GMR? Global Medical Response (GMR) and its family of solutions are dedicated to delivering compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. Here you'll embark in meaningful work that will make an impact on you and the customers we serve. View our employees' stories on how we provide care to the world at ****************** EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Compensation: $70000 annual salary (based on local Full-time schedule). Check out our careers site benefits page to learn more about our benefit options.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust RESPONSIBILITIES: Work involves all shifts including weekends in company trucks, delivering orders to our customers and checking them for accuracy. Responsible for following all DOT regulations, including pre-trip and post-trip inspections, properly maintaining your log book and/or e-logs, and reporting any deficiencies in your equipment. BASIC QUALIFICATIONS: High school graduate or equivalent. Class A Commercial Driver's License and 2+ years of Tractor/Trailer driving experience. Must be at least 21 yrs. of age. Dependable and safety conscious. Consistent on-time performance and strong customer service skills. Excellent driving record. EOBR knowledge preferred. All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

Immediately hiring a Permanent Full Time Senior Level Diesel Technician to support our Truck Fleet at Ryder in Denver, Pennslyvania For More Info Call Jason or text "Denver" to************ Hear it from a Ryder Technician Employee Here: ******************************* Hourly Pay: $28.00 per hour Sign on Bonus: $3500 Ryder pays $1750 at 30 days and $1750 at 90 days Certification Bonus of $100 for each New ASE Certification Obtained up to $700 Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year Schedule: Monday-Friday Weekends OFF Hours: First Shift 7:00 am - 3:30 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles Apply Here with Ryder Today For More Info Call Jason or text "Denver" to************ We have all the benefits other shops do without the wait! Annual Merit Pay Increases Every Year On the Job Paid Training Medical, Dental, Vision, 401 K etc. Start at 30 Days We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply) Paid Time Off Starts Accruing at DAY ONE with 80 hours per year Additional Day Off for U.S. Military Veterans 401 K offers a company match HIGH VALUED Stock at 15 % Employee Discount PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000! Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today! For More Info Call Jason or text "Denver" to************ Click Here to See All Ryder Careers:************************************************ We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements High school diploma or equivalent preferred Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred Basic tools, required Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including: Routine preventative maintenance, which should include oil changes, brake and tire work Basic diagnostics and repairs, including AC and electrical systems, required Three (3) years or more relevant work experience, preferred Valid Commercial Driver License (CDL) CLASS A,preferred All other certification as required by location, required Valid Commercial Driver License (CDL) CLASS A,preferred All other certification as required by location, required ADDITIONAL REQUIREMENTS: Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc. This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must: Must be able to obtain CDL within 6 months after hire Pass a Ryder Drug Test Pass a DOT physical Pass a Ryder road test Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities Performs vehicle maintenance and repair duties including: Performs standard vehicle maintenance Performs preventive maintenance Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable Completes complex and detailed mechanical inspections & repairs with minimal supervision Replaces defective components as instructed Works unsupervised on most tasks Performs facility maintenance duties Interacts with customers/drivers to properly determine nature of complaint once assigned a task. Utilizes key functions of Shop Management System and electronic documentation available. Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT). Acts as mentor for Tech 1 and Tech 2 levels. Demonstrate the ability to access and use internal and external maintenance documents. Other support duties as required to support operations. These could include but are not limited to Service Island support SBTIII trained within 180 days (SBT220) Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days) Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 week ago (12/4/2025 10:59 AM) Requisition ID 2025-192403 Location (Posting Location) : State/Province PA Location (Posting Location) : City DENVER Location (Posting Location) : Postal Code 17517 Category Technicians/Service Employees5 Additional Locations (use this field to indicate if position can be domiciled in several areas) US-PA-LANCASTER | US-PA-READING Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000356 Min Pay USD $28.00/Hr. Max Pay USD $28.00/Hr.

Start a Watco Career and Discover the Difference Keep the world's supply chain moving. That's what the Watco team does every day at our short line railroads, switching sites, terminals, ports, and logistics hubs. Whether you're at one of these locations or in a support-services role, there's one thread that ties everyone together. We're all on the same team. One Watco. Here's what you can expect from Watco: Outstanding culture recognized by Forbes and Newsweek Competitive compensation and benefits Paid on-the-job training with peer trainers Operations training at the Safe Performance Center in Birmingham, Alabama Leadership and development programs offered through Watco University Career advancement opportunities Description Roadmaster is directly responsible for maintenance of a railroad and its track assets to ensure safe passage of trains. Qualifications High School Diploma or GED. Have 5 years of track maintenance experience. Have a valid Driver's License. Able to pass WATCO background check requirements Obtain a TWIC card for location entry access Pass drug and alcohol tests Possess great flexibility to adapt in a changing work environment. Proficient in computer-based record keeping, track charts, spreadsheets, Microsoft Word/Excel/PowerPoint, etc. Willing to work outdoors in all types of weather conditions Flexibility regarding working hours in case of call outs. Willingness to work independently without supervision Able to report to work location within a 90-minutes notice Available 24/7/365. Demonstrate in the field inspection test Understand FRA 213, 214, 219 standards Pass WATCO RWP/GCOR/RWIC Exam Pass WATCO Track System Safety Standards Exam Pass WATCO CWR Exam On-call responsibilities are an essential function of this job. Employees must have the ability and willingness to support operations of critically important systems and/or processes 24 hours per day/7 days per week. On-call assignments may include after-hours, weekends, and holidays.Physically inspect projects with direct reports to ensure quality work and accurate estimates. Responsibilities Ensure that safety policies and procedures are being followed and enforced based on WATCO/FRA regulations. Ensures FRA 213, FRA 214 and FRA 219 standards, testing, and inspection requirements are met. Develop strategic safety plans for improvement YOY through a reduction in incident severity, frequency, and type. Mentoring, teaching, training and surveillance of Inspectors, Foreman, and support personnel Provide overall management of Railroad & Capital projects in terms of labor requirements, material requirements, delivery of materials, scheduling, equipment utilization and work in progress. Develop and provide plans for future development of the track department. Manage the effective utilization of manpower, equipment, vehicles, and track materials to insure both quality and quantity of work being performed. Schedule and supervise all third-party activities including, but not limited to Watco tie and surfacing gangs, rail detection, bridge inspections, weed spray, signal maintenance etc. Maintain written procedures for all field personnel to use as guidelines for qualifications, wages, training, Track standards, inspection, maintenance and repair of all internal track, ties, rail, switches, frogs' crossovers, crossings, etc. that are based on sound and proven track maintenance methods in WATCO policies and applicable regulations. Meets with FRA as required to receive feedback regarding track conditions. Ensures compliance with all Federal, State, and Local regulations. Monitor Emaint to ensure FRA track inspection records & compliance are up to date and being followed as described in the regulation Track and monitor specified quantitative data points for weekly/monthly reporting meetings with Division Engineering Superintendent. Track material cost to ensure maintenance department follows set budgetary requirements Other duties may be assigned.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here . Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

Pay Rate: $69,899.83 - $110,171.00 depending on experience *Relocation Assistance potentially available for FULL TIME Paramedics. Inquire within* We're hiring Paramedics in Washington County that are passionate about delivering compassionate, high-quality service and basic, as well as advanced, patient care to our customers. RESPONSIBILITIES Assess each call situation to determine the best course of action while working with progressive Paramedic protocols. Utilize your Paramedic skills on medical equipment and procedures including defibrillator, EKG monitor, oxygen and suction devices, and intravenous fluids to provide advanced medical care. Communicate with patients and loved ones to provide information and assurance that care is being given. Act as Paramedic team leader and take responsibility for the scene and unit management as needed. Drive the ambulance on 911 responses. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow Paramedics. MINIMUM QUALIFICATIONS High school diploma or equivalent (GED) Oregon State Paramedic License State Driver's License BLS, ACLS, PALS, PHTLS ICS 100, 200, 700, 800 Driving record in compliance with company policy Pass Physical Agility Test Some work experience, preferably in healthcare INCLUDED BENEFITS Paid Shift Differentials Enhanced Holiday Pay Paid Training Paid Wellness Days Generous PTO Accruals Why Choose AMR? AMR is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care, and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page to learn more about our benefit options.

Immediate opening for a SOLO Class A CDL Truck Driver and we want the right Trucker to join us at Ryder in Smyrna, TN! For More Information Call Autumn or Text "Smyrna" to ************ See and Hear from a Ryder Employee who Drives for Us Here: *************************************** You might be wondering what your paycheck will look like. $1350 or more per week - And it gets better Driver Positions Pay Weekly Hourly Pay: $29.00 Per Hour Hours Per Week: 40 + hours per week Per Diem Pay: $50.00 per night with 3 nights per Week Overnights for Route in Ryder Booked Hotel Sign On Bonus: Pays you $1500 at 30 days and $1500 at 90 days Schedule: Varies Start Time: Dispatch between 11:15 PM - 5:00 AM Apply Here with Ryder Today Stop applying to companies that don't have your best interest in mind. At Ryder, we promise transparency and want you to have the actual pay and route details upfront making your decision to join our team easy. Deliver SOLO To: TN, MS, IL, KY, AR Route: Regional; Out Every Other Night Tractor Type: Day Cab Trailer Type: Dry Van 53' Equipment: Hand Cart Freight: Touch - Retail Goods Unload Only For More Information Call Autumn or Text "Smyrna" to ************ Trucks are 36 months or newer, include 24/7 Roadside Maintenance and Company Drivers fuel up the trucks at over 800 Maintenance Facilities Nationwide. We have all the benefits other carriers do without the wait: BOOT ALLOWANCE PROVIDED Paid Personal Time Off Starts at Day 1 - 80 hours accrued in First Year DO NOT LOSE Paid Personal Time Policy - We encourage you to use Vacation Time earned. If you decide not to use it - we pay you the remaining balance at your hourly pay rate. Medical, Dental, Vision Start at 30 Days We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply) Immediate 401k rollover and contributions with company match at one year Quality Employee Discounts that actually save you Money on Tools, Cars, Hotels Worldwide, Electronics/Appliances, Cell Phones, Travel and more Ryder Drivers are the Captain of the Ship - OUR DRIVERS make decisions to keep yourself and others safe and we protect your job when you do For More Information Call Autumn or Text "Smyrna" to ************ We will buy your truck if you're looking to switch from Owner Operator to a Company Employee Driver, we will help make the switch even easier. We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Let Ryder pay you more and Refer a Driver. We pay Unlimited Bonuses for Hired Drivers. Click here to see all Ryder Driving Opportunities:*************************** EEO/AA/Female/Minority/Disabled/Veteran \#driverhbc Requirements Minimum 21 years of age Pass a Ryder Drug Test Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Pass a DOT physical Pass a Ryder road test Provide appropriate CDL and endorsements for the position Must have Class A verifiable experience in a tractor trailer or comparable vehicle: 9 months experience within the past 3 years, OR 2 years' experience within the last 5 years, OR 5 years' experience within the last 10 years Ability to follow written and/or oral instructions Ability to read, interpret and apply laws, rules, regulations policies and/or procedures Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities Ensuring compliance with applicable federal and/or state laws, regulations, and/or agency rules, standards and guidelines Detecting and eliminating or minimizing safety hazards Maintaining accurate records and logs Loading/Unloading freight or assisting in the loading/unloading of freight if required by customer Performs other duties as assigned Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 month ago (11/6/2025 9:53 AM) Requisition ID 2025-191080 Primary State/Province TN Primary City SMYRNA Location (Posting Location) : Postal Code 37167 Category Drivers Regional/OTR Solo Employment Type Regular-Full time Travel Requirements Driver Position Code 1000599

Start a Watco Career and Discover the Difference Keep the world's supply chain moving. That's what the Watco team does every day at our short line railroads, switching sites, terminals, ports, and logistics hubs. Whether you're at one of these locations or in a support-services role, there's one thread that ties everyone together. We're all on the same team. One Watco. Here's what you can expect from Watco: Outstanding culture recognized by Forbes and Newsweek Competitive compensation and benefits Paid on-the-job training with peer trainers Operations training at the Safe Performance Center in Birmingham, Alabama Leadership and development programs offered through Watco University Career advancement opportunities Starting Pay: $19.00 per hour. Schedule: Monday - Thursday from 6:00am - 4:00pm with overtime as needed. Description The track laborer will be required to safely and efficiently inspect, repair, and maintain the railroad track infrastructure to ensure safe and efficient service to our customers. This is a manual labor position, which requires that the individual becomes proficient in the following skills, duties, and requirements within a prescribed training and introductory period. Essential Duties and Responsibilities include the following. Other duties may be assigned. Inspect, unload, load, distribute, pick-up, install cross ties, switch ties, other track material and ballast. Inspect, unload, distribute, load, pick-up, install, grind, and transpose rail. Inspect, load, unload, distribute, pick-up, remove, construct, maintain and repair turnouts. Inspect, patrol, construct, install, retire, remove, surface, gauge, line and shift track. Inspect, protect, flag, construct, install, maintain, and repair road crossings. Inspect, protect, flag, construct, install, maintain, repair, paint, renew and replace bridges. Inspect, protect, flag, maintain, repair and construct culverts and tunnels. Inspect, dismantle, remove, maintain, repair and paint station facilities. Inspect, test, maintain, repair, construct and install scales. Inspect, remove, maintain, repair, construct, and install right of way, sand and snow fences. Inspect, construct, install, maintain, clean and paint signs. Cut and dispose of vegetation. Clean debris from switches. Remove snow or other foreign materials from track infrastructure. Accurate and timely reporting as required Read and accurately interpret company documents such as safety rules, operating and maintenance instructions and federal and state regulations. Communicate professionally and effectively. Must acquire a comprehensive understanding of track authority. Comply with performance metrics measurements and deadlines. Practice safe work habits and follow company and industry policies, procedures and regulations. Respond promptly to any accident, incident or emergency call. Read gauges, precision measuring instruments, schematics and maintenance manuals 100% of the time. Operate equipment such as backhoe and trackhoe. Education and Experience: High school education or general education (GED) or 3 to 6 months job-related experience; or equivalent of education and experience. Must be 18 years or older. Certificates and Licenses: The team member must possess a valid driver's license with no restrictions. Class A CDL with no restrictions preferred. The team member must be able to pass Track Ground School, GCOR Written Test, Roadway Worker Protection Written Test, Fall Protection Written Test, Maintenance of Way Safety Written Test, MSHA/OSHA Training and Certification (if required on site). Knowledge, Skills, and Abilities: Must have the ability to apply common sense and understanding to carry out written and oral instructions. Must have the ability to write legibly. Must be able to perform duties that require heavy lifting. Must be willing to work outdoors in varying weather conditions. Must be able to have a flexible work schedule. Must have the ability to recognize problems. Must have knowledge of Roadway Protection Rules. Must have a broad understanding of railroad operations. Physical Demands: The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here . Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

Are you ready to build a rewarding career in the railroad industry? Join the Genesee & Wyoming Inc. (G&W) team - part of a legacy that is over 125 years old. With a network of 100+ individual freight railroads and 4,000 employees across North America, we provide transportation and logistics services to more than 2,000 customers. At G&W, we live by our Core Values: Safety, Service, Integrity, Respect, Transparency, Accountability, Innovation and Excellence. We offer competitive pay, a comprehensive benefits package, and paid training to help you succeed. Check out some of our great benefits below: * Medical, Dental, Vision & Telehealth * Life Insurance * Optional benefit coverages for Accident, Critical Illness, Hospital, ID Theft & Life Insurance * Flexible Spending & Health Savings account plans * Employee Assistance Program * 401(k) Retirement Plan * On the Job Training * Paid Time Off * Tuition Reimbursement * This position does NOT pay into Railroad Retirement * And more! Explore your future with G&W today and learn more about the opportunities to grow across our organization! Job Summary: As a Switchman, you'll play a key role in safely operating rail equipment to ensure that freight is delivered to our customers efficiently. We will provide you with hands-on and classroom training to set a strong foundation for a long-term career. You'll work outdoors in all weather conditions, tackling new challenges each day while ensuring we meet our customers' needs. This is a physically active position with real opportunities for growth and advancement in a complex and dynamic environment. See our employees in action to learn more at ****************************** Responsibilities: * Comply with all federal, state, and other applicable railroad safety and operational regulations * Follow instructions when working with a certified trainer, mentor, or supervisor * Communicate with customers and team members using oral, written, hand signals, lantern signals or radio instructions to coordinate train or railcar movement * Operate track switches to determine the route of the train or rail equipment * Evaluate, plan, and complete all assigned work safely and efficiently * Climb on and off equipment and walk the length of the train or rail yard to support train operations * Apply or release hand brakes on railcars multiple times a day to control movement * Read and understand the rule books and other written or printed material * Inspect the condition of railcars in movement and while stationary * Connect air hoses and electrical components between locomotives or railcars * Utilize basic computer skills proficiently for electronic reporting and train documentation * Perform other duties as assigned Working Conditions / Physical Requirements: * Full-time (40 plus hours weekly) * Varying schedule in a 24/7 work environment that includes nights, holidays, weekends, and on-call as needed * Outdoor work in all weather conditions working up to a 12-hour shift * Walking long distances on uneven surfaces and climbing ladders and equipment always ensuring three points of contact in varying environmental conditions * Able to lift up to 75 pounds from floor to waist and carry short distances * Able to squat, bend and lift overhead * Have good balance and coordination * Must meet vision requirements Skills and Experience: * 2+ years of related or relevant work experience is a plus * Effective communication skills both written and verbal * Experience working in a safety-sensitive environment is a plus * Possess situational awareness and decision-making abilities to respond effectively in a safety sensitive environment Required Education and Credentials: * High school diploma or GED; or an equivalent combination of education and/or work experience * Valid driver's license * At least eighteen years of age Employment Requirements: * Pre-employment physical, hearing, and vision medical review * May be subject to federally mandated drug and alcohol testing including pre-employment drug screening * Background screening including criminal and motor vehicle driving history Relocation: Must live within 50 miles of assigned location or be willing to relocate. Relocation assistance is not offered for this position. This position is employed by the specific entity set forth in the job posting. Equal Opportunity Employer Genesee & Wyoming Inc. and its subsidiary companies are Equal Opportunity Employers. All qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or any other protected status protected under federal, state or local laws.

Reference Number: 3748 Department: Engineering Rate of Pay: 33.41/hourly If you wish to solicit an employee referral for this position, please ensure the employee submits the referral prior to submitting your application. Description A Bridge Tender monitors maritime and railroad communication channels from vessels and railroad units indicating a desire to pass. Accountabilities * Ensure compliance with all railroad rules and regulations for safety, operations and Federal Railroad Administration (FRA) * Develop and maintain positive working relationships with coworkers, supervisors, contractors and/or customers and effectively handle conflict situations * Miscellaneous tasks as assigned by supervisor Qualifications - Required * Applicants must have reached the age of 18 or above. * Experience reading and understanding instructions (examples may include: operating and safety rules, bulletins, special instructions, and federal regulatory documents) Qualifications - Preferred Physical and Mental Job Requirements Work Conditions * Must be legally authorized to work in the United States without requiring company sponsorship. What we offer: * A strengths-based, engagement-focused, and performance-oriented culture * Ongoing learning, development, and Educational Assistance (including little to no out-of-pocket cost for online and in-person courses at the University of Nebraska at Omaha) * 401(k) retirement plan * Employee Stock Purchase Plan with 40% match up to 5% (contribute 5% and UP will contribute 2%) * Medical, dental and vision insurance, which are collectively bargained for through union membership * Wellness and Employee Assistance Programs