Water pump operator jobs near me

Gladiator Energy is on a mission to expand our team with individuals motivated in a fast-paced environment, eliminating inefficiencies on location, promoting personal and professional career growth, establishing safety protocols, coupled with high-level rewards. Gladiator Energy is dedicated to our core values: Communication, Responsiveness, Quality Work, and Respect. With relentless execution of teamwork between leadership and personnel, our mission to be a leading service provider against our competitors in the global energy industry is possible. We are seeking an experienced Cement Pump Specialist to support our Plug and Abandonment (P&A) operations. The ideal candidate will be responsible for operating and maintaining cement pumping equipment to safely and efficiently execute wellbore abandonment projects in compliance with regulatory and company standards.Key Responsibilities Operate cementing units, pumps, and mixing systems during well abandonment operations. Conduct pre- and post-job equipment inspections and routine maintenance. Calculate slurry volumes, displacement, and pressure requirements. Mix and pump cement slurries to set wellbore plugs per engineered designs. Collaborate with field engineers, wireline, and rig crews during P&A operations. Maintain accurate job logs and equipment performance reports. Ensure compliance with environmental, health, and safety standards. Requirements Minimum 2 years of experience in oilfield cementing; P&A experience preferred. Proficiency with high-pressure pumps, cement blending, and downhole displacement. Valid CDL (Class A with Hazmat/Tanker endorsements preferred). Strong understanding of cementing calculations and procedures. Ability to work in remote environments and on a rotational schedule (14/7). Physically fit to handle lifting, bending, and long shifts in field conditions. Preferred Qualifications: Experience with plug placement in onshore/offshore wellbores. Knowledge of regulatory requirements for well abandonment (RRC). Familiarity with cementing simulation software and digital data acquisition systems. Gladiator Energy is an equal opportunity employer and considers all applicants without regard to race, color, religion, national origin, ancestry, citizenship, sex, pregnancy, age, physical or mental disability, genetic information, services in the uniformed services, or any other basis protected by federal, state, or local law.

Subsidiary: KIRA Infrastructure Job Title: Water/Wastewater Operator I Labor Category: Full-Time | Non-Exempt | CBA (Union Represented) Clearance Level: N/A Travel Requirement: N/A Pay Rate: $42.42 At Tlingit Haida Tribal Business Corporation (THTBC), your work goes beyond the job description-it becomes part of a purpose-driven legacy. Our continuous commitment to growth directly contributes to the strength, resilience, and future of the communities we support. Our growth fuels programs, services, and lasting value for the Tribe, making every success a shared one. For over 35 years THTBC and its subsidiaries has delivered essential services to federal clients across the globe. Whether supporting logistics, information technology, cyber security, or facilities operations, we are united by a shared mission: to create meaningful economic opportunity and growth of the Tlingit & Haida Tribes of Alaska. Together We Grow - One Mission, One Team - With a Commitment to Serve Scope of Work: Provide operational support to the Water/Wastewater Treatment Plant. Responsibilities: Water Plant Operations * Operate and control treatment plant equipment to purify and clarify water for human or industrial use. * Regulate flow of raw water and dosage of treatment chemicals (e.g., chlorine, polymer, fluoride) using electric motors, valves, and automated systems (SCADA/HMI). * Monitor filtration and chemical mixing processes, adjust flow rates and pressure, and ensure proper water distribution. * Perform backwashing, equipment cleaning, and routine maintenance using hand and power tools. * Test water samples for acidity, turbidity, and chemical content using lab instruments. * Record operational data and chemical levels. May also operate portable water-purification systems and assist with wastewater treatment as needed. Wastewater Plant Operations * Operate and monitor sewage treatment and sludge processing equipment to manage flow and treatment of wastewater. * Adjust valves, gates, and controls (manual or remote) based on readings from gauges, meters, and test results. * Start/stop pumps, engines, and generators to support various treatment stages (screening, aeration, digestion). * Maintain logs of plant operations and meter readings. * Direct plant attendants in routine tasks and perform water quality testing using lab equipment. * Perform preventative, operational, and corrective maintenance as required. * Ensure work areas are cleaned and restored after maintenance tasks are completed. * Adhere to company policies, procedures, and safety regulations. * Perform other duties as assigned. Minimum Requirements: * Possess knowledge, skills, and experience to perform the job. * Must possess current certification per WAC 173-230, Certification of Operators of Wastewater Treatment Plants, and additional licensure/certifications as required by the position, state, contract. * Understanding safety procedures and ability to work in compliance with OSHA and workplace safety regulations. * Operators at Wastewater Treatment Plant may be required to undergo the series of Hepatitis vaccinations. * Must be able to satisfactorily complete a Tier 1 Public Trust background check, if required for the position. * Must be able to maintain the ability to access the government worksite. * Must possess and maintain a valid state driver's license and a safe driving record, in accordance with company policy, to operate vehicles or equipment as required for the position. Physical Demands / Work Environment: * Physical requirements include (but are not limited to) the ability to lift 50 pounds, pushing, pulling, carrying, stooping, bending, squatting, and reaching for long periods of time. * Work may be performed indoors or outdoors in varying weather conditions. Must be able to work in confined spaces, at heights, and around various hazards with appropriate PPE. * Must be able to work on-call, alternate, and extended shift schedules when necessary to meet the mission requirements, including weekends and holidays. * May be exposed to fumes, odors, dusts, gases, chemicals, oils, airborne particles or bloodborne pathogens, potential toxic or caustic chemicals, grease, smoke, gases, heat, cold, electrical currents, vibration, and other hazardous conditions including vehicular traffic and construction equipment All candidates must successfully complete pre-employment screening, which may include but is not limited to a criminal background check, motor vehicle record review, and a 5-panel drug test, in accordance with company policy and applicable laws. Benefits: We offer a flexible benefits package including medical, dental, and vision plans, TRICARE Supplemental, critical illness coverage, employee discounts, wellness seminars, company-paid life and short-term disability insurance, optional long-term disability, paid leave, a 401(k) plan, and identity theft protection to support your health and financial well-being. For represented positions, the benefits and leave offered will be as defined under the applicable Collective Bargaining Agreement. Equal Employment Opportunity: We are proud to be an equal opportunity employer and comply with all applicable federal, state, and local employment laws. All applicants will be considered for employment without regard to race, color, religion, creed, national origin, gender, gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy, parental status, or any other characteristic protected by law. Reasonable Accommodation: If you have a disability or medical condition and need reasonable accommodation, please inform the designated recruiter during the hiring process.

Job Purpose: The Mitigation Technician is responsible for performing water mitigation, content manipulation, fire and smoke cleaning of structure and contents, remediation of mold and microbial contamination within residential and commercial structures. You should be comfortable performing tasks independently, including paperwork completion and leading a crew. Duties and Responsibilities: • Construction of containment systems and critical barriers • Monitoring of environmental controls and negative pressure • Operation of air scrubbers and negative air machines • Monitoring moisture and humidity • Precision demolition • Removal of contaminated building materials • Post-remediation detailed cleaning and fire odor restoration • Perform dry-checks • Water damage emergency response and monitoring • Mold remediation • Biohazard cleanup • Set up and monitor drying equipment • Apply antimicrobial products • Proper use of PPE equipment including respirator, gloves, and goggles. • Leads a team of 1-2 personnel • Can work independently to complete jobs • Cross training in Cleaning, Contents, and CRU • Other duties as assigned • Work safely daily, and report unsafe work conditions or unsafe behaviors. Qualifications: • Must pass a respirator test and keep facial hair cut to meet the respirator fit standard. • Experience in mitigation and construction restoration minimum 1 year • Certification with the IICRC a plus • Completion of 6 basic Reet's Academy training or W.R.T certification • Proficient use of all mitigation equipment and tools • Ability to create moisture map in the field • Basic understanding of Xactimate and MICA is a plus • Ability to use Matterport for scans • Basic understanding and utilization of iCat is a plus • Mitigation chemical application knowledge • Maintains a good driving record • Equipment knowledge/troubleshooting • Available for overtime • Must participate in the on-call rotation for emergency response services, including nights, weekends, and holidays as needed. Work Environment: • Jobsites may vary from very clean environments to very dirty environments or other unsanitary conditions. Protective gear is available for use and is required on some heavily contaminated work sites. • The worker is subject to atmospheric conditions. One or more of the following conditions that affect the respiratory system of the skin: fumes, odors, dust, mists, gases, or poor ventilation. • Please note that this position could never be performed remotely. Physical Demands: • Medium work: exerting up to 50 pounds of force routinely, and/or 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. • Ascends/descends ladders, stairs, scaffoldings, and the like, using feet and legs and/or hands and arms. • Maintain balance in all situations. • Must be comfortable in confined spaces for long periods of time • Push, pull and frequently carry objects such as tools, materials and equipment. • Stoop, kneel, crouch and crawl. • Stand and walk for long periods of time. • Coordinate movement with eyes, hands, fingers, and feet. • See and hear well with or without correction to avoid safety hazards to themselves and others. • This position will never be remote. Mental and Cognitive Requirements: · Attention to Detail: Precision in following restoration protocols, and ensuring work meets safety and quality standards. · Time Management: Efficiently prioritizes tasks and manages time to stay on schedule, even in fast-paced environments. Must be able to meet deadline requirements. Must be able to arrive on time to jobs/office. · Adaptability and Resilience: Capacity to handle unexpected changes, such as additional damage discovered, and work under pressure in emergency or time-sensitive situations. · Communication Skills: Clear communication with team members, project managers, and sometimes clients, to relay progress, issues, or safety concerns. · Emotional Resilience: Ability to handle potentially challenging environments, including distressed clients and high-stakes projects, while maintaining professionalism.

The Cargill Agricultural Supply Chain (CASC) connects producers and users of grains and oilseeds around the globe through sourcing, storing, trading, processing, and distributing grains and oilseeds, as well as offering a range of financial, risk management and customized farmer services. Working at Cargill is an opportunity to thrive - a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! Job Type: Full Time Shift(s) Available: 1st. Compensation: $18.00 /hr. Sign-On Bonus: $2000 New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Benefits: Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities: Performing facility operations such as receiving and shipping products, which may include fertilizer, chemicals, seed, and grain Basic maintenance and operator care of equipment to ensure ongoing facility operations Providing excellent customer service and engaging with team members Understanding and adhering to all safety rules and regulations Maintaining a safe and clean work environment Other duties as assigned Basic Requirements: Must be eligible to work in the US without visa sponsorship Must be 18 years or older. Ability to perform physical job duties which may include bending, lifting up to 50lbs, kneeling, climbing, crawling, and twisting, with or without a reasonable accommodation Ability to understand and communicate in English (verbal/written) Basic use of a computer Must be able to work in various weather, industrial and agricultural settings Ability to work in elevated areas (4 feet and above) Ability to work overtime, weekends, and holidays with advance notice Preferred Qualifications: Basic mechanical aptitude Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

United Community Bank is seeking a Deposit Operations Floater to join our collaborative anddynamic team. This role offers a unique opportunity to support multiple departments within Deposit Operations, ensuring continuity of daily processes and providing coverage during peakperiods or staff absences What You'll Do * Perform daily tasks across various departments including ACH & Cash Ops, Balance Control, ATM & Card Operations, Deposit Account Maintenance, Documentation, Research Returns, Wire Transfers, and more. * Provide coverage and support during high-volume periods or when team members are unavailable. * Communicate effectively with internal teams and branch representatives. * Recommend process improvements to enhance efficiency and reduce risk. * Assist with training and special projects as needed Requirements For Success * Bachelor's degree in Business, Accounting, or Finance preferred. * 3-6 years of experience in banking operations or a related field. * Proficiency in Microsoft Office and ability to navigate computer systems with ease. * Strong understanding of banking regulations and operational procedures. * Excellent communication, time management, and organizational skills. * Ability to adapt quickly and work collaboratively across departments. * Willingness to work flexible hours and travel occasionally for training or conversions. Conditions of Employment * Must be able to pass a criminal background & credit check * This is a full-time, non-remote position; flexible scheduled required FLSA Status: * Non-Exempt We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state, or local protected class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Pay Range USD $38,769.00 - USD $57,876.00 /Yr.

Description Metropolitan Environmental Services Inc About Us: Metropolitan Environmental Services Inc., part of the Carylon Corporation, has continuously served industry and municipalities since 1948. We are a nationwide collection of 14 best-in-class companies. Our vast resources, expertise, and decades of experience get even the toughest jobs done right. We offer not just a job, but a long-term career, as many of our employees start and end their careers with us. We are proud of the many dedicated employees who we consider family. Job Description: Performing industrial maintenance cleaning work, including vacuuming industrial wastes/materials (solids, sludges and liquids) and hydro-blast cleaning various surfaces. Must read and write English; enabling employees to complete job related paperwork necessary for billing/payroll purposes, document truck inspections, read maps/ directions to job site, read safety warnings, etc. Job Details: Position: Water Blaster Technician Location: Columbus, OH Pay: $22.00-$24.00 per hour (Based on experience) Full Benefits: Health, Dental, Vision, 401K, PTO, ESOP Job Duties: The Technician is responsible for pre-tripping their company vehicle as assigned for the day and keeping the vehicle clean and fueled. Once at the customer's site, the technician is responsible in taking part of the job walkdown, safety briefings, orientation and assist in the set-up of the job. The projects consist of general labor breaking up various types of deposits, which routinely build up in the manufacturing processes of our customers, by use of hydro-blasting equipment. In addition, the tech is responsible for the removal of those deposits using high-suction industrial vacuum hoses, as well as manual shoveling. At times, the technician will be required to wear respiratory protection including self-contained breathing apparatuses (SAR/SCBA's) and must maintain no more than a day's facial hair growth to allow a proper seal of all respiratory protection. Technicians also perform other types of industrial cleaning as well such as sandblasting, cryogenics blasting and chemical cleaning. Secure and maintain a minimum Class D license, allowing the employee to drive the truck from the shop to job site and back to the shop again, operating industrial vacuum trucks, tankers, hydro-blasters, etc. Employees are directly responsible for assisting in the establishment/implementation of safety practices on a job basis Employees must be physically capable of instituting such practices, without posing a threat to the health and safety of themselves and/or co-workers. Requirements: Ability to work indoors and outdoors in varying conditions performing physical labor Strong communication and teamwork skills All candidates must complete and pass a DOT physical, company non-DOT physical, or a combination of both, which includes bloodwork, lift test, pulmonary function test (PFT), audiogram, and a company drug screen Must have a minimum of Class D driver's license Previous outdoor labor, driving, transportation, or construction experience preferred No OMVI/DUI/DWI or reckless driving convictions within the past 2 years No license suspensions or major violations in the past 3 years No more than 2 speeding tickets or 4 total moving violations in the past 3 years Willingness to comply with all company and client safety and operational policies Flexibility to work some weekends and occasional travel based on project needs Safety Job Functions: Comply with all aspects of client & company policies and procedures. Communicate effectively with the client and other employees and management. AA/EEO Statement Carylon Corporation and all its companies provide Equal Employment Opportunity for all individuals regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, status as a protected veteran, genetic information, status as a qualified individual with a disability and any other basis protected by federal, state or local laws.

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. American Structurepoint's Utility Infrastructure Group is seeking candidates to join us for our Spring Co-op program in Columbus, OH! As a Utility Infrastructure Intern, you'll work alongside engineers on real utility projects, including water and stormwater systems-gaining hands-on experience through design work, calculations, and field visits. You'll support both office tasks and construction activities in the field, all while developing essential skills through structured training. This is more than just an co-op-it's your chance to grow your technical knowledge, explore your future career, and contribute to projects that improve vital community infrastructure. Responsibilities What you will do: Collaborate directly with Project Managers and the Ohio Department of Public Works team to research data and records for regulatory compliance - getting real experience working with clients Use Geographic Information Systems (GIS), client databases, and historic records to uncover important project information - building your tech and research skills Gain valuable insight into working as a consultant in a client-focused environment, learning how to communicate and deliver professional results Conduct research, summarize your findings, and help prepare key documents like permit applications, technical exhibits, design drawings, and inspection records Other tasks as needed to support the team Qualifications Qualifications: Students majoring in Civil Engineering, Environmental Engineering, Construction Engineering, Land Surveying, Structural Engineering, or related programs with a focus on Civil Engineering Reliable personal vehicle and valid driver's license for travel to project sites Strong work ethic, effective communication skills, and eagerness to learn and take on new challenges

Job Description Join the industry leader! BOLAND provides clients with sustainable and energy efficient solutions for commercial, institutional and industrial buildings in the Washington, DC / Baltimore metropolitan area. We allow building occupants and owners to do what they do best -- focus on business, not buildings. Did you know we have been named "Best Place to Work" by 'Washington Business Journal' 18 times? Water Technologies Technician: Service water treatment account list monthly. Maintain estimated margins at all accounts. Look for and sell equipment upgrades, new contracts with sales AE's. Install water treatment equipment, participate in chemical cleanings and other work as directed by management. Job Type: Full-Time Workplace Type: Remote, work within a geography Office Location: MD, DC, VA, WV FLSA Status: Non-Exempt Essential Duties: Maintain and create client relationships. Generate sales opportunities. Prepare and submit work tickets/service reports after each regular service call. Attend full-service meetings, water technologies meetings, and attend training classes. Ensure safety procedures are followed. Be available to assist other water treatment technicians when needed. Service accounts on a monthly/quarterly schedule as specified. Schedule appointments with clients. Keep track of legionella testing schedules. Keep track of corrosion coupon testing schedules. Pull water samples, properly fill out chain of custody forms and ship them. Be able to install all water treatment equipment. Calibrate and program chemicals and controllers. Keep all jobsite water treatment stations clean and in good working order. Instruct and educate clients on water treatment procedures. Maintain accurate inventory and transfers of equipment & chemicals Load van with 50lbs pails of chemicals. Estimate the cost of installations. Help with chemically cleaning chillers, heat exchangers and installations. Stay up to date on truck maintenance schedule and keep truck clean. Maintain excellent driving record. Respond to all forms of internal and external communication with a sense of urgency. Other duties as assigned Education and Experience Requirements: High school diploma or equivalent experience and education. College degree preferred. Must have valid driver's license and clean driving record Must have 1-2 years of water treatment experience. Knowledgeable in MS Office and Outlook Strong communication and listening skills, problem solver, responsive. Motivated to learn, proactive, inquisitive, dependable, interpersonal skills with clients, organized. Must be able to work well independently and be a team player. Detail-oriented, able to interact with all levels of management. Physical Requirements: Mobility within office & job sites Ability to lift & carry up to 50lbs regularly & occasionally lift and/or move up to 100lbs Willing to travel within D.C., MD, VA, WV area as required Frequent visits to job sites Specific vision required by this job includes the ability to see colors, close, distance, peripheral vision, depth perception, and ability to adjust focus We offer: Excellent pay and benefits Great and supportive work environment Professional training and growth Generous educational assistance program Recognition and outstanding co-workers! If you are interested in joining the Boland team, please apply through the company website: ********************** We want to hear from you! Boland is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, national origin, age, disability, or veteran status. We comply with applicable federal laws, including Section 503 of the Rehabilitation Act and VEVRAA.

Skilled Laborer Water Technician Company and Culture:PuroClean, a leader in emergency property restoration services, helps families and businesses overcome the devastating setbacks caused by water, fire, mold, biohazard, and other conditions resulting in property damage. We operate with a ‘servant-based leadership' mindset and seek to create an environment where our team members can grow both professionally and spiritually through serving our customers, communities, and each other. Job Position Description:With a ‘One Team' mentality, you will perform services as assigned while following PuroClean production guidelines. Working to ensure all customer needs are met in a kind and sympathetic way, our water technicians lead their teams and work with supervisors on all aspects of restoration work on residential and commercial jobsites, as well as maintain vehicles, equipment, and assets of the business. Our technicians take pride in going above and beyond customer expectations in their times of need by providing a world class level of service which sets up apart from our competitors in the industry. Responsibilities: Managing Customer Satisfaction and representing the brand Be a part of a winning team with the ‘One Team' mentality. We serve together Serve your community in their time of need Learn and develop new professional skills in a fast-paced environment Effectively perform all aspects of the production processes Regular Vehicle and equipment maintenance and organization Working with your direct supervisor to ensure team is unified and efficient Following all uniform and policy guidelines in line with the Brand Identity Guide Always leaving jobsites with a clean and orderly appearance Developing production expertise through providing services Maintaining cleanliness of products and equipment to the highest standard Ensure clear communication with office staff, immediate supervisor and fellow technicians Qualifications: Willingness for continued learning and growth Attention to details in organization, cleanliness and care for facility, assets and equipment Aptitude with record keeping, recording information and communicating ‘ the message' Awareness and respect for safety, using care are caution with teammates and customers Strength with multitasking and handling deadlines Ability to lift at least 50 lbs. and comfortable on your feet for prolonged periods of time Benefits: Health Insurance through Anthem Blue Cross Blue Shield $25,000 Life Insurance through Anthem Health Dental Insurance through Superior Dental 3 day vacation during first year of employment after successfully completing a 90 day introductory period Potential raises after achieving the required certifications Additional benefits and perks based on performance and employers' policies Compensation: 26,000-30,000 “We Build Careers” - Steve White, President and COO With over 300 locations across North America and Canada, PuroClean is leading the industry in emergency property restoration services, by helping families and businesses overcome the devastating setbacks caused by water, fire, mold, biohazard, and other conditions resulting in property damage. We operate with a ‘servant-based leadership' mindset and seek to create an environment where our team members can grow both professionally and spiritually through serving our customers, communities, and each other. Culture is very important to us. We want to make sure that we are the right fit for YOU! Apply today and join our Winning TEAM. “We are One Team, All In, Following The PuroClean Way in the spirit of Servant Leadership” This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to PuroClean Corporate.

The Main Line Utilities Operator (Sanitary/Water/Storm) will operate machinery for construction, demolition, or excavation projects and other duties as assigned. Duties/Responsibilities: Follows Values, Vision and Mission Works with a team Operate equipment including excavators, dozers, rock trucks, skid steers, roller, and tractors with pan Prepares construction sites for building, demolition, or excavation Uses equipment to prepare building sites for construction Ensures loads are secured properly Grease and fuel equipment prior to beginning/end of shift Cleans equipment and performs daily inspections Performs routine maintenance and repairs Attends and participates in morning huddle Dig for mainline utility installation Finish grading of building pads and roadway with GPS instruments or stakes, with topo shots Helps keep crew on task and proper production Sets Safety example by following safety guidelines at all times and complies with proper safety procedures and PPE Performs other related duties as assigned/needed up to and including all laborer duties Required Skills/Abilities: Expert in all laborer duties Expert Ability to work independently Ability to listen, understand, and follow directions Ability to effectively communicate and problem solve Ability to remain flexible in job hours worked as specific assignments change Ability to perform basic math (addition, subtraction, multiplication, and division) Knowledge of utility installation and cut/fill operations Mechanical Skills Ability to read construction blueprints and calculate run, rise, percentage, GPS, as-builds, etc. Ability to read cut sheets, grade stakes and GPS station Proper instrument set up of GPS base with equipment, pipe laser, rotary laser, line/surface level, etc. Proper rigging practices Education and Experience: 8 to 10+ years of dirt/utility experience Expert knowledge of heavy equipment operation and capabilities Expert knowledge of construction Valid driver's license or State ID CPR and First Aid (Thompson will train if necessary) 10-hour OSHA certification (Thompson will train if necessary) Physical Requirements: Must have physical strength, balance, hand-eye coordination, and stamina necessary to complete jobs in various areas Must be able to lift and carry up to 25 pounds Must be able to operate machinery for prolonged periods of time Must be able to operate equipment in a variety of environments including but not limited to concrete, dirt, fumes, and loud noise levels Must be able to work long hours and Saturdays when needed Required Tool: High Vis shirt or Vest Utility knife Clothes with no large holes or cut offs for varying weather conditions Vision, Mission, Values: By honoring God, we will become nationally preferred concrete and excavation provider To entrust and empower our team to create the best experience for clients, communities, and families We will build lasting relationships based on Faith - Walk the path of obedience with a conviction for giving back to our community near and afar . Safety - Commit to the health and wellbeing of ourselves and those around us through adherence to our safety policies to ensure every team member goes home safely to their families every day. Integrity - Live a “no excuses” existence, taking responsibility for our actions while appropriately recognizing others for their contributions. Quality - Stive for continuous improvement to ensure the highest level of long-lasting craftsmanship . Teamwork - Recognize the exponential value of “many “over “individual” to reach out goals . Trust - Be loyal to our teammates to the degree they know we are dedicated to having their backs. Respect - Treat others the way they deserved to be treated, lifting them up in times of need and appreciating their efforts . Empowerment - Entrust and equip our team members to reach their full leadership potential through mentorship, training, and patience.

Type of Requisition: Regular Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: None Public Trust/Other Required: None Job Family: Professional Engineering Job Qualifications: Skills: Construction Management, Engineering Design, Field Research, Utility Operations, Water Utilities Certifications: None Experience: 15 + years of related experience US Citizenship Required: Yes Job Description: Seize your opportunity to make a personal impact as an Engineer Sr Advisor supporting the a nationwide project focused on drinking water system infrastructure enhancements to protect human health. GDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career. At GDIT, people are our differentiator. As an Engineer Sr Advisor you will help ensure today is safe and tomorrow is smarter. Our work depends on a Engineer Sr Advisor joining our team to support the delivery of technical assistance to drinking water systems in the U.S. who require support to identify and plan for the removal of lead service lines. HOW AN ENGINEER SR ADVISOR WILL MAKE AN IMPACT Travels nationwide to support meetings with drinking water utilities receiving technical assistance to assess their current status and technical assistance needs Provides subject matter expertise on drinking water utility operations, engineering, infrastructure, design, and construction Travels to collaborate with field teams collecting drinking water service line data Conducts knowledge transfer to less experienced team members on topics such as proper techniques for service line identification when performing field inspections Provides onsite oversight of field crews potholing to identify water service line material Provides engineering knowledge on viable methods of water service line replacement including open trench excavation, pipe pulling, and directional drilling Provides onsite construction oversight during water service line replacements to water utility staff to train them to properly oversee and audit the work of construction contractors Maintains current knowledge of emerging technologies being evaluated for service line material identification WHAT YOU'LL NEED TO SUCCEED: Education: Bachelor's degree with a focus on engineering Required Experience: 15+ years of related experience Required Technical Skills: hands on experience with drinking water utility design, operations, and infrastructure improvements Required Skills and Abilities: ability to relate to drinking water system operators to understand their challenges and propose viable solutions, capable of working independently and on teams, willing to support knowledge transfer to less experienced team members while supporting field work, positive attitude and an adaptable mindset to adjust to different needs of each community/drinking water utility receiving technical assistance Location: Remote GDIT IS YOUR PLACE: 401K with company match Internal mobility team dedicated to helping you own your career Cutting-edge technology you can learn from The likely hourly rate for this position is between $77.65 - $105.05. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 8 Travel Required: 25-50% Telecommuting Options: Remote Work Location: Any Location / Remote Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc. Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

**Discover Your Career at Emory University** Emory University is a leading research university that fosters excellence and attracts world-class talent to innovate today and prepare leaders for the future. We welcome candidates who can contribute to the excellence of our academic community. **Description** JOB DESCRIPTION: + Ensures safe and efficient operation of steam plant boilers (up to 4,000 BHP) and Chillers (up to 2000 tons) and other equipment associated with the steam and chiller plants in accordance with the American Society of Mechanical Engineers (ASME) and the National Fire Protection Association (NFPA) codes and standards. + Serves as a back-up to the Manager, Plant Operations, and trains new Plant Operators on the operation of the Emory steam and chiller plant systems. + Operates and controls utility panels that monitor equipment to maintain utility services to the plants. + Maintains and records entries in logbooks, operating logs, and regulatory reports. + Oversees operations associated with an electrical power distribution panel. + Reads and interprets OEM Manuals; reads precision instruments. + Performs minor mechanical piping repairs. + Performs preventive and corrective maintenance in accordance with engineering practices on utility systems which include but are not limited to the following: compressed air, CO2, steam boilers, water purification, fuel oil, chillers, and glycol. + Samples, tests, analyzes, mixes and injects chemicals to maintain boiler waterside conditions and blow downs. Inspects the steam plant to check meters, charts, pressures and temperatures. + Ensures a clean boiler room to prevent fire hazards. + Operates hand and power tools. + Takes the necessary precautions, in keeping with OSHA standards and other applicable federal and state regulations, when working with hazardous chemicals and materials and power equipment. + Uses personal protective equipment as required. + Drives utility vehicles to and from work sites and safeguards against vandalism and theft. + Performs other related responsibilities as required. MINIMUM QUALIFICATIONS: + A high school diploma or equivalent and six years of experience in a multi-boiler high pressure steam plant. + Holds a Second Class Power Engineers License issued by the National Institute for the Uniform Licensing of Power Engineers, Inc. (NIULPE). + A working knowledge of the American Society of Mechanical Engineers (ASME) and the National Fire Protection Association (NFPA) codes for power boilers. + Some positions in this classification may require a valid Georgia driver's license and an insurable driving record. + All candidates must be capable of frequently lifting and carrying 50 pounds and be capable of pushing or pulling up to 150 pounds properly. NOTE: Position tasks are required to be performed in-person at an Emory University location; working remote is not an option. Emory reserves the right to change this status with notice to employee. **Additional Details** Emory is an equal opportunity employer, and qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law. Emory University does not discriminate in admissions, educational programs, or employment, including recruitment, hiring, promotions, transfers, discipline, terminations, wage and salary administration, benefits, and training. Students, faculty, and staff are assured of participation in university programs and in the use of facilities without such discrimination. Emory University complies with Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veteran's Readjustment Assistance Act, and applicable executive orders, federal and state regulations regarding nondiscrimination, equal opportunity, and affirmative action (for protected veterans and individuals with disabilities). Inquiries regarding this policy should be directed to the Emory University Department of Equity and Civil Rights Compliance, 201 Dowman Drive, Administration Building, Atlanta, GA 30322. Telephone: ************ (V) | ************ (TDD). Emory University is committed to ensuring equal access and providing reasonable accommodations to qualified individuals with disabilities upon request. To request this document in an alternate format or to seek a reasonable accommodation, please contact the Department of Accessibility Services at accessibility@emory.edu or call ************ (Voice) | ************ (TDD). We kindly ask that requests be made at least seven business days in advance to allow adequate time for coordination. **Connect With Us!** Connect with us for general consideration! **Job Number** _154295_ **Job Type** _Regular Full-Time_ **Division** _Campus Services_ **Department** _FM PLANT OPERATIONS_ **Job Category** _Facility Support and Building Maintenance_ **Campus Location (For Posting) : Location** _US-GA-Atlanta_ **_Location : Name_** _Emory Campus-Clifton Corridor_ **Remote Work Classification** _No Remote_ **Health and Safety Information** _Not Applicable_

Join us and celebrate the beauty of human experience. Create for happier, healthier lives, with love for nature. Together, with our customers, we deliver food innovations, craft inspired fragrances and develop beauty and wellbeing solutions. There's much to learn and many to learn from, with more than 16,000 employees around the world to explore ideas and ambitions with. In the USA, we develop, market and produce a wide array of solutions from our 25 most innovative sites, based across the country. Stretch your skills, create and get inspiration from passionate colleagues. Every day, your energy, your thirst for knowledge, and your creativity will shape our future, making a positive difference on billions of people. Every essence of you enriches our world. We are Givaudan. Human by nature. Pay Rate: $20.41/hr + Shift Differential Basic Function (Purpose of Position): To provide support to the operation by cleaning/sanitizing tanks, vessels, containers, utensils. Job Specifications: * Operates cleaning equipment including clean-in-place machines, floor scrubber/sweeper and drum washer. * Cleans (manually or with equipment) tanks, containers, vessels, fillers, utensils, and other manufacturing/processing equipment and the production floor. * Exhibits proficiency in all functions of two of the three skill areas (Small Wash Area, Large Wash Area/Fixed Tanks, Flavors Side). * Maintains neat, orderly and clean shop floor and workplace at all times. * Works in compliance with Good Manufacturing Practice (GMP), Occupational Safety and Health Administration (OSHA) regulations and adheres to internal policies. * Performs other duties as required. Minimum Education/Experience/Skills/Job Knowledge/: High School diploma or equivalent is required. Up to 1 year of related experience in a manufacturing environment required. Able to read and write English. Must understand computer screens applicable to cleaning and be able to work with automated systems. Forklift and Hi-Lo experience is preferred. Must be safety-oriented, flexible, customer-focused and willing to work overtime as needed. Clear communication skills, team work skills and attention to detail are essential. For Dispensing, must have knowledge of metric weight systems/conversions with ability to perform basic mathematical calculations is preferred. Physical Demands/Dexterity: Must be able to regularly/often lift, push, and pull to 50 lbs. Frequent standing, walking, climbing, reaching, bending, lifting, pushing, pulling, grasping, and crouching is required. Use of foot pedals and typing on a computer may be necessary. Able to climb portable ladders up to 12 feet high and climb stationary stairs to stable mezzanine platform up to 16 - 20 feet high and work from heights. Equipment Used: Clean- in- Place machine, floor scrubber/sweeper, drum washer, forklift, Hi-Lo, and Grinders are used regularly. At Givaudan, you contribute to delightful taste and scent experiences that touch people's lives. You work within an inspiring teamwork culture - where you can thrive, collaborate and learn from other talented and passionate people across disciplines, regions and divisions. Every essence of you enriches our world. Diversity of perspectives fuels innovation and fosters deeper connections with our employees, customers, and partners. At Givaudan, we are dedicated to cultivating an inclusive environment where every individual's voice is valued and has the power to shape our world. Join us in making a difference together. Remote working: On-site At Givaudan, you contribute to delightful taste and scent experiences that touch people's lives. You work within an inspiring teamwork culture - where you can thrive, collaborate and learn from other talented and passionate people across disciplines, regions and divisions. Join us and Impact Your World Diversity drives innovation and creates closer connections with our employees, customers and partners. Givaudan embraces diversity and is committed to building an inclusive environment where everyone impacts our world.

The development of the Water Damage Specialist at the intermediate level has four (4) objectives: 1) to act as head of the water damage team that deals with residential losses and small commercial losses; 2) knowledge and technical competence in IICRC's standard work practices on water and mold damage; 3) competence in the use, care and maintenance of water extraction equipment, portable drying equipment and moisture detection instruments; and 4) ability to determine the extent, dimension and distribution of moisture, and to document water losses. Intermediaries provide assistance in the development of basic level technicians and assist advanced technicians in complex or large-scale projects. Intermediaries in CAT service can simultaneously manage multiple losses for water, including the organization and management of temporary workers. To qualify for this position, you must have 12 months of previous experience in the Basic Level of Water Damage in BELFOR or equivalent standard experience in the sector, as well as having directly participated in (at least) 25 water damage projects. This position represents level 3 in the progressive itinerary of Water Damage. Responsibilities Must be able to receive the instructions provided by the Supervisor. Direct the teams in the use of the right PPE for the job. Review the daily requirements of projects, document progress and notify managers of progress and challenges encountered. Provide appropriate field documentation, photographic records, charts and sketches for various TPA projects. Perform daily inspections of vehicle safety and maintenance and keep these clean and in perfect conditions of use. Attention to details. The professional will be obliged to comply with the standards of BELFOR to safeguard the property of other people. Must have a deep knowledge of customer service, as well as the principles and practices of this. Ability to work with time constraints to meet specific deadlines. You will be periodically requested to travel and work at night and during weekends. You must inform in a timely and accurate manner about the time worked and the equipment and consumables used. Attend the operations sponsored by BELFOR and the security training courses that are necessary. Requirements Supervise and self-perform Water Damage Basic tasks Gather pictures to download to job files Maintaining equipment used in daily tasks related to Debris removal; Containment/Drying Chambers; Wall Cavity Drying; Pump System Knowledge; Carpet seam cutting -- cushion removal; Baseboard Removal Properly identify Class 4 material, moisture measurements, and deploy most effective technique to dry/restore the material Evaluate integrity of affected structural materials and contents for direct and indirect water damage; accurately assess the cost of restoring vs cost of replacement. Create moisture maps using tools and knowledge provided Supervise small crews on above tasks Additional duties as required Qualifications Working knowledge of IICRC S500 Water Damage Standard Working knowledge of IICRC S520 Mold Remediation Standard Carry current IICRC WRT designation Must demonstrate familiarity with BELFOR Water Damage Book Must demonstrate proper use of appropriate meters and IR camera, understanding of affected vs unaffected building materials and contents. Demonstrate ability to draw a sketch, read floor plan, complete a Moisture Content Log, complete a Pychrometric Log and determine drying goals Demonstrate an understanding of air mover calculation, LGR dehumidification chart; electrical power spec and electrical circuits Demonstrate mastery in the use of HydroSensor, Thermal Hygrometer, NavPro Moisture Meter or equivalent and the recording of data Experience with Truck mount extraction systems, maintenance and troubleshooting Demonstrated experience supervising small crews (up to 10 people) on Residential/Commercial and Industrial losses Eligible to operate a motor vehicle per BELFOR's vehicle policy Possess sense of urgency, professional demeanor, positive attitude, and strong work ethic English language literacy and fluency Physical Demands Frequent lifting in excess of 50 lbs Occasional lifting from 41 lbs +, assisted (up to 50% of the time) Access and mobility in tight spaces Sustained periods of standing, sitting, walking, bending, and kneeling Ability to use mobile devices for collection of data and time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties and skills required of personnel so classified.

The development of the Water Damage Specialist at the intermediate level has four (4) objectives: 1) to act as head of the water damage team that deals with residential losses and small commercial losses; 2) knowledge and technical competence in IICRC's standard work practices on water and mold damage; 3) competence in the use, care and maintenance of water extraction equipment, portable drying equipment and moisture detection instruments; and 4) ability to determine the extent, dimension and distribution of moisture, and to document water losses. Intermediaries provide assistance in the development of basic level technicians and assist advanced technicians in complex or large-scale projects. Intermediaries in CAT service can simultaneously manage multiple losses for water, including the organization and management of temporary workers. To qualify for this position, you must have 12 months of previous experience in the Basic Level of Water Damage in BELFOR or equivalent standard experience in the sector, as well as having directly participated in (at least) 25 water damage projects. This position represents level 3 in the progressive itinerary of Water Damage. Responsibilities * Must be able to receive the instructions provided by the Supervisor. * Direct the teams in the use of the right PPE for the job. * Review the daily requirements of projects, document progress and notify managers of progress and challenges encountered. * Provide appropriate field documentation, photographic records, charts and sketches for various TPA projects. * Perform daily inspections of vehicle safety and maintenance and keep these clean and in perfect conditions of use. * Attention to details. * The professional will be obliged to comply with the standards of BELFOR to safeguard the property of other people. * Must have a deep knowledge of customer service, as well as the principles and practices of this. * Ability to work with time constraints to meet specific deadlines. * You will be periodically requested to travel and work at night and during weekends. * You must inform in a timely and accurate manner about the time worked and the equipment and consumables used. * Attend the operations sponsored by BELFOR and the security training courses that are necessary. Requirements * Supervise and self-perform Water Damage Basic tasks * Gather pictures to download to job files * Maintaining equipment used in daily tasks related to Debris removal; Containment/Drying Chambers; Wall Cavity Drying; Pump System Knowledge; Carpet seam cutting -- cushion removal; Baseboard Removal * Properly identify Class 4 material, moisture measurements, and deploy most effective technique to dry/restore the material * Evaluate integrity of affected structural materials and contents for direct and indirect water damage; accurately assess the cost of restoring vs cost of replacement. * Create moisture maps using tools and knowledge provided * Supervise small crews on above tasks * Additional duties as required Qualifications * Working knowledge of IICRC S500 Water Damage Standard * Working knowledge of IICRC S520 Mold Remediation Standard * Carry current IICRC WRT designation * Must demonstrate familiarity with BELFOR Water Damage Book * Must demonstrate proper use of appropriate meters and IR camera, understanding of affected vs unaffected building materials and contents. * Demonstrate ability to draw a sketch, read floor plan, complete a Moisture Content Log, complete a Pychrometric Log and determine drying goals * Demonstrate an understanding of air mover calculation, LGR dehumidification chart; electrical power spec and electrical circuits * Demonstrate mastery in the use of HydroSensor, Thermal Hygrometer, NavPro Moisture Meter or equivalent and the recording of data * Experience with Truck mount extraction systems, maintenance and troubleshooting * Demonstrated experience supervising small crews (up to 10 people) on Residential/Commercial and Industrial losses * Eligible to operate a motor vehicle per BELFOR's vehicle policy * Possess sense of urgency, professional demeanor, positive attitude, and strong work ethic * English language literacy and fluency Physical Demands * Frequent lifting in excess of 50 lbs * Occasional lifting from 41 lbs +, assisted (up to 50% of the time) * Access and mobility in tight spaces * Sustained periods of standing, sitting, walking, bending, and kneeling * Ability to use mobile devices for collection of data and time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties and skills required of personnel so classified.

The development of the Water Damage Specialist at the intermediate level has four (4) objectives: 1) to act as head of the water damage team that deals with residential losses and small commercial losses; 2) knowledge and technical competence in IICRC's standard work practices on water and mold damage; 3) competence in the use, care and maintenance of water extraction equipment, portable drying equipment and moisture detection instruments; and 4) ability to determine the extent, dimension and distribution of moisture, and to document water losses. Intermediaries provide assistance in the development of basic level technicians and assist advanced technicians in complex or large-scale projects. Intermediaries in CAT service can simultaneously manage multiple losses for water, including the organization and management of temporary workers. To qualify for this position, you must have 12 months of previous experience in the Basic Level of Water Damage in BELFOR or equivalent standard experience in the sector, as well as having directly participated in (at least) 25 water damage projects. This position represents level 3 in the progressive itinerary of Water Damage. Responsibilities Must be able to receive the instructions provided by the Supervisor. Direct the teams in the use of the right PPE for the job. Review the daily requirements of projects, document progress and notify managers of progress and challenges encountered. Provide appropriate field documentation, photographic records, charts and sketches for various TPA projects. Perform daily inspections of vehicle safety and maintenance and keep these clean and in perfect conditions of use. Attention to details. The professional will be obliged to comply with the standards of BELFOR to safeguard the property of other people. Must have a deep knowledge of customer service, as well as the principles and practices of this. Ability to work with time constraints to meet specific deadlines. You will be periodically requested to travel and work at night and during weekends. You must inform in a timely and accurate manner about the time worked and the equipment and consumables used. Attend the operations sponsored by BELFOR and the security training courses that are necessary. Requirements Supervise and self-perform Water Damage Basic tasks Gather pictures to download to job files Maintaining equipment used in daily tasks related to Debris removal; Containment/Drying Chambers; Wall Cavity Drying; Pump System Knowledge; Carpet seam cutting -- cushion removal; Baseboard Removal Properly identify Class 4 material, moisture measurements, and deploy most effective technique to dry/restore the material Evaluate integrity of affected structural materials and contents for direct and indirect water damage; accurately assess the cost of restoring vs cost of replacement. Create moisture maps using tools and knowledge provided Supervise small crews on above tasks Additional duties as required Qualifications Working knowledge of IICRC S500 Water Damage Standard Working knowledge of IICRC S520 Mold Remediation Standard Carry current IICRC WRT designation Must demonstrate familiarity with BELFOR Water Damage Book Must demonstrate proper use of appropriate meters and IR camera, understanding of affected vs unaffected building materials and contents. Demonstrate ability to draw a sketch, read floor plan, complete a Moisture Content Log, complete a Pychrometric Log and determine drying goals Demonstrate an understanding of air mover calculation, LGR dehumidification chart; electrical power spec and electrical circuits Demonstrate mastery in the use of HydroSensor, Thermal Hygrometer, NavPro Moisture Meter or equivalent and the recording of data Experience with Truck mount extraction systems, maintenance and troubleshooting Demonstrated experience supervising small crews (up to 10 people) on Residential/Commercial and Industrial losses Eligible to operate a motor vehicle per BELFOR's vehicle policy Possess sense of urgency, professional demeanor, positive attitude, and strong work ethic English language literacy and fluency Physical Demands Frequent lifting in excess of 50 lbs Occasional lifting from 41 lbs +, assisted (up to 50% of the time) Access and mobility in tight spaces Sustained periods of standing, sitting, walking, bending, and kneeling Ability to use mobile devices for collection of data and time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties and skills required of personnel so classified.

Job Title: Floater Operator Job Status/ Grade: Hourly Location: Lancaster, Ohio Department: Manufacturing, Coating Reporting To: Plant Supervisor Direct Reports: None Starting Pay: 20.50/Hour ** 1st Shift 6:00am - 4:00pm Monday - Thursday ** Job Summary: The Floater Operator is responsible for operating a coating and/or slitting machine to coat or slit coils of paper, film, or foil with pressure sensitive adhesive by performing the duties listed below. He/she participates in training, problem solving, and addressing issues on the machine. ESSENTIAL JOB FUNCTIONS: (other duties may be assigned) Responsible for training and providing support to team members. Ensures adherence to procedures, regulatory compliance, and environmental health and safety requirements. Suggests changes to equipment and processes to improve efficiency of operations. Set-up for machine operation. Places rolls of face paper and backing substrate on shafts and positions correctly on machine. Turns control dials of machines to regulate speed of substrates, temperature of drying ovens, and flow of adhesive. Operate machine at maximum speed for each product. Check pre-production (set-up) samples for correct pattern materials, web dimensions, etc. Provide test samples, as required, to Quality Assurance. Check materials pre, in process and post production using calipers and rulers. Halt production if found to be running out of specification. Accurately pick raw material, return raw material, enter labor tracking and complete rolls into the ERP system. Accurately label rolls for shipment, inventory or next process in line. Maintain accurate, neat machine reports. Report material problems to Supervisor/Manager and Quality Assurance. Maintain improvements to process and equipment. Resolve minor problems with equipment and process. Report major problems to Supervisor and assist in resolving. Must be able to operate forklift and clamp truck. Responsible for startup and shut down of machine. Maintain neat, orderly work area. Must be able to operate 2 of the following machines without supervision: Hot Melt, Emulsion, Solvent, or Slitter. QUALIFICATIONS: Required: High school diploma or general education degree (GED) Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. Quality - Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in a timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Attendance/Punctuality - Is consistently at work and on time. Preferred: Mechanical aptitude and prior machine operator experience Background in Math/Mechanics Basic knowledge of bar-coding software, label printing software and the ability to enter data via keyboarding and/or by using scanning guns. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or fingers, handle or feel objects, tools, or controls. The employee is required to stand; walk; sit; squat; kneel and reach with hands and arms. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. Work Environment: The Slitter Operator work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee regularly works with moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Other: This Slitter Operator in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. Acknowledgement: I understand that I may be called upon to perform additional duties if the work is similar, related, or a logical assignment to the position. I have read and understand this job description, and I agree to perform such duties to the best of my ability.

WHAT WE OFFER Your journey with Capstone Copper starts here. At Capstone, our people are the heart of our organization. We are focused on growth and are committed to unlocking the full potential of ourselves, our teams and our resources. We invest in our people to develop a skilled and engaged workforce, not only for today, but for the future. If you are looking for a purposeful, performance-driven and dynamic work environment, join us! Pinto Valley is an open-pit copper mine located at the west end of the historic Globe-Miami mining district of central Arizona, approximately 80 miles east of Phoenix. Pinto Valley has been in operation since 1972 and has produced more than four billion pounds of copper. Acquired by Capstone from BHP in 2013, the mine is fully permitted through 2039 and a study is underway to potentially extend the mine life through 2050. Our proximity to the Greater Phoenix metro area provides prospective employees with the option to live in communities such as Mesa, Apache Junction, Gilbert, Chandler, San Tan Valley, or Florence. Our location offers a unique work-life balance, blending the rewarding opportunities of the mining industry with easy access to the vibrant energy of Downtown Phoenix, making it an ideal choice for both individuals and their families. Capstone employees are eligible for an extensive total rewards package, designed to support your physical, mental, financial, and emotional well-being. This package includes, but is not limited to: * 401(k) Savings Plan - Eligible from day one, contribute up to 30% of your salary with a dollar-for-dollar company match up to 6%, fully vested immediately. * Retirement Boost - The company contributes 8.5% of your salary, increasing to 14.2% after reaching the Social Security wage base, with 100% immediate vesting. * Employee Share Purchase Plan - After three months, contribute 2% to 7% of your salary (max $5,000/year) to buy company shares, with a 50% company match, fully vested upon grant. * Annual Short Term Incentive Bonus - Up to 30% * 4-day, 10-hour work schedule * Affordable Medical, Dental, and Vision benefits (effective on start date), including Telehealth options and additional supplemental insurances * Disability and Life Insurance (effective on start date) * Paid time-off, including vacation, holidays, sick leave, and parental leave * Employee Assistance Program * Internal progression opportunities * Tuition reimbursement * Discounted insurance plans for pets, automobiles and homes * Additional Potential Benefits: * Relocation assistance available with additional funds provided to cover tax liabilities POSITION RESPONSIBILITIES Responsible for monitoring, maintaining and troubleshooting the Tailings and Water Monitoring Systems which includes, but is not limited to, piezometers, prisms, slope inclinometers, transducers, flow meters and radar scanning equipment. * Demonstrate commitment to safety and Capstone's Values in Action. * Safety & Compliance: Demonstrate Capstone Copper Values and adhere to all MSHA requirements and Pinto Valley policies. Maintain required certifications and consistently apply safe work practices during field and monitoring activities. * Field Verification & Access Management: Verify locations of all tailings and water monitoring system instrumentation and update mapping in AutoCAD as new equipment is added. Review access routes to monitoring points and coordinate with site personnel to restore or construct safe and reliable access. * Instrumentation Protection & Maintenance: Develop and implement protection plans for piezometers, inclinometers, prisms, and other monitoring devices. Perform daily and weekly system health checks, troubleshoot offline or malfunctioning equipment, and maintain KPI reporting on monitoring system performance. * Real-Time Monitoring & Alerts: Monitor real-time systems to identify variances or threshold exceedances. Promptly notify the Engineer of Record (EoR) and site engineers of system alerts and support follow-up actions. * Installation & Data Collection: Coordinate with contractors on installation of new and replacement field instrumentation. Collect monitoring data-piezometers, inclinometers, prisms, and related measurements-for environmental reporting, EoR reviews, and engineering analyses. * Technology Evaluation & Program Support: Assess the effectiveness of existing monitoring systems and research emerging technologies such as Sensemetrics, InSAR, and radar scanning. Assist site engineers in developing training materials and documentation to support the monitoring program. * Operational Support: Provide field support for tailings and water operations, including sand sampling and KPI data collection such as freeboard, beach width, and seepage measurements. Perform additional duties as needed to support TSF monitoring and operational reliability. * Take on additional tasks and responsibilities as assigned, demonstrating flexibility and initiative. POSITION REQUIREMENTS Required * High School Diploma or equivalency. * Minimum 1 year of experience in tailings or water operations/maintenance. * Proficient in Microsoft Word and Excel. * Ability to work effectively with diverse teams, including internal staff, contractors, instrumentation providers, and engineering consultants. * Strong communication skills. * SAP experience for notification entry and follow-up. * Basic surveying techniques. * Exposure to electronic system troubleshooting (e.g., battery systems, solar panels, cables). * Understanding of operational areas including Mine, Mill, SXEW, and Tailings & Water Reclamation Facilities. Combination of office and some mine site work with exposure to dust, loud noise, temperature extremes, wet conditions and uneven terrain. Some off-site work may be required, including interactions with vendors and contractors. All candidates will be required to complete a pre-employment medical exam, drug and alcohol test, and background check. All positions require a pre-placement physical examination to ensure candidates are 'fit for duty'. Additional training and/or testing may be required. Capstone maintains a drug and alcohol-free workplace. CAPSTONE COPPER IS AN EQUAL OPPORTUNITY EMPLOYER.

WHAT WE OFFER Your journey with Capstone Copper starts here. At Capstone, our people are the heart of our organization. We are focused on growth and are committed to unlocking the full potential of ourselves, our teams and our resources. We invest in our people to develop a skilled and engaged workforce, not only for today, but for the future. If you are looking for a purposeful, performance-driven and dynamic work environment, join us! Pinto Valley is an open-pit copper mine located at the west end of the historic Globe-Miami mining district of central Arizona, approximately 80 miles east of Phoenix. Pinto Valley has been in operation since 1972 and has produced more than four billion pounds of copper. Acquired by Capstone from BHP in 2013, the mine is fully permitted through 2039 and a study is underway to potentially extend the mine life through 2050. Our proximity to the Greater Phoenix metro area provides prospective employees with the option to live in communities such as Mesa, Apache Junction, Gilbert, Chandler, San Tan Valley, or Florence. Our location offers a unique work-life balance, blending the rewarding opportunities of the mining industry with easy access to the vibrant energy of Downtown Phoenix, making it an ideal choice for both individuals and their families. Capstone employees are eligible for an extensive total rewards package, designed to support your physical, mental, financial, and emotional well-being. This package includes, but is not limited to: 401(k) Savings Plan - Eligible from day one, contribute up to 30% of your salary with a dollar-for-dollar company match up to 6%, fully vested immediately. Retirement Boost - The company contributes 8.5% of your salary, increasing to 14.2% after reaching the Social Security wage base, with 100% immediate vesting. Employee Share Purchase Plan - After three months, contribute 2% to 7% of your salary (max $5,000/year) to buy company shares, with a 50% company match, fully vested upon grant. Annual Short Term Incentive Bonus - Up to 30% 4-day, 10-hour work schedule Affordable Medical, Dental, and Vision benefits (effective on start date), including Telehealth options and additional supplemental insurances Disability and Life Insurance (effective on start date) Paid time-off, including vacation, holidays, sick leave, and parental leave Employee Assistance Program Internal progression opportunities Tuition reimbursement Discounted insurance plans for pets, automobiles and homes Additional Potential Benefits: Relocation assistance available with additional funds provided to cover tax liabilities POSITION RESPONSIBILITIES Responsible for monitoring, maintaining and troubleshooting the Tailings and Water Monitoring Systems which includes, but is not limited to, piezometers, prisms, slope inclinometers, transducers, flow meters and radar scanning equipment. Demonstrate commitment to safety and Capstone's Values in Action. Safety & Compliance: Demonstrate Capstone Copper Values and adhere to all MSHA requirements and Pinto Valley policies. Maintain required certifications and consistently apply safe work practices during field and monitoring activities. Field Verification & Access Management: Verify locations of all tailings and water monitoring system instrumentation and update mapping in AutoCAD as new equipment is added. Review access routes to monitoring points and coordinate with site personnel to restore or construct safe and reliable access. Instrumentation Protection & Maintenance: Develop and implement protection plans for piezometers, inclinometers, prisms, and other monitoring devices. Perform daily and weekly system health checks, troubleshoot offline or malfunctioning equipment, and maintain KPI reporting on monitoring system performance. Real-Time Monitoring & Alerts: Monitor real-time systems to identify variances or threshold exceedances. Promptly notify the Engineer of Record (EoR) and site engineers of system alerts and support follow-up actions. Installation & Data Collection: Coordinate with contractors on installation of new and replacement field instrumentation. Collect monitoring data-piezometers, inclinometers, prisms, and related measurements-for environmental reporting, EoR reviews, and engineering analyses. Technology Evaluation & Program Support: Assess the effectiveness of existing monitoring systems and research emerging technologies such as Sensemetrics, InSAR, and radar scanning. Assist site engineers in developing training materials and documentation to support the monitoring program. Operational Support: Provide field support for tailings and water operations, including sand sampling and KPI data collection such as freeboard, beach width, and seepage measurements. Perform additional duties as needed to support TSF monitoring and operational reliability. Take on additional tasks and responsibilities as assigned, demonstrating flexibility and initiative. POSITION REQUIREMENTS High School Diploma or equivalency. Minimum 1 year of experience in tailings or water operations/maintenance. Proficient in Microsoft Word and Excel. Ability to work effectively with diverse teams, including internal staff, contractors, instrumentation providers, and engineering consultants. Strong communication skills. SAP experience for notification entry and follow-up. Basic surveying techniques. Exposure to electronic system troubleshooting (e.g., battery systems, solar panels, cables). Understanding of operational areas including Mine, Mill, SXEW, and Tailings & Water Reclamation Facilities. Combination of office and some mine site work with exposure to dust, loud noise, temperature extremes, wet conditions and uneven terrain. Some off-site work may be required, including interactions with vendors and contractors. All candidates will be required to complete a pre-employment medical exam, drug and alcohol test, and background check. All positions require a pre-placement physical examination to ensure candidates are 'fit for duty'. Additional training and/or testing may be required. Capstone maintains a drug and alcohol-free workplace. CAPSTONE COPPER IS AN EQUAL OPPORTUNITY EMPLOYER.