Quality Control Inspector jobs at Weatherford International - 113 jobs

Are you interested in a position that is challenging and innovative? For over 75 years, Oil States Industries, Inc. has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States Industries, Inc. recognizes that our diverse workforce is our greatest asset. We offer a competitive pay package, including an annual incentive bonus program for all employees. When we contribute to the company's success, we all win. Oil States is currently looking for a qualified candidate for the position of Quality Inspector I in Lampasas, TX. POSITION SUMMARY: Ensures products produced meet customer or in-house quality and specifications requirements. Identifies, records, evaluates and recommends solutions to quality problems. ESSENTIAL DUTIES AND RESPONSIBILITIES: Inspects in-process parts visually and dimensionally using required instruments. Inspects received materials visually and dimensionally through material test reports and certifications. Completes reports and related paperwork. QUALIFICATION REQUIREMENTS: Mathematical skills (addition/subtraction, multiplication/division, algebra). Conversions of decimals to fractions and vice versa. Utilize blueprints, charts and graphs, customer drawings and specifications. Verbal and written communication skills. PHYSICAL REQUIREMENTS: Moderate bending Ability to lift up to 50 lbs. Extended walking, standing and/or sitting. Able to climb stairs. Must be able to work in temperatures over 100° F Be part of what's next at Oil States Industries, Inc.! Over 75 years in business An Equal Opportunity Employer An E-Verify Employer Un Empleador de E-Verify

DUTIES AND RESPONSIBILITIES Monitor and report Quality Assurance and Quality Control aspects of required work scope package(s). Control and ensure the accuracy of all required component parts. Completion of various inspection and quality reports. Mechanical and inspection report completion to the required standard. Ensure traceability of all parts required and documentation trail are in place. Record and document traceable information which will be required to certify the manufacturing process, to the highest standard. Perform all work-related duties as assigned. Comply with all NOV Company and HSE policies, procedures and guidelines. SKILLS & EXPERIENCE REQUIRED Strategic 2+ years of hands-on Dimensional inspection experience utilizing precision tools included but not limited to: Calipers, OD Mics, Dial Indicators, etc. Ability to understand, evaluate and apply technical information (Functional Technical Learning). Proven ability to read and comprehend GDNT drawings and Critical Dimension reports. Comprehension of MTR's and NDT certificates. Knowledge of Coatings a plus Operating Be willing to provide colleagues with the information they need to complete their tasks and eliminate roadblocks (informing). Be quick to identify critical information and respond appropriately (Priority Setting). Personal and Interpersonal A strong sense of internal/external customer focus (Customer Focus) A candid team player who collaborates with peers to solve problems (Peer Relationships) Detail Oriented Is known to consistently adhere to ethical principles and expects others to follow suit (Ethics & Values) Competitive Benefits: (visit usbenefits.nov.com for more information about our benefits offerings) 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest. Competitive medical plans that are effective your date of hire. Coverage options for just yourself as an eligible employee start at as little as $40 per pay period (bi-weekly), and plans that cover your entire family (yourself, eligible spouse, and eligible children) start at $150.50 per pay period (bi-weekly). Starting in 2026, FREE MDLIVE virtual visits (when enrolled in an NOV medical plan). FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician). FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees). All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals. All regular full-time employees receive up to 11 paid holidays per year.

Job Roles: Works in a manner consistent with company values. Creates and maintains a safe, positive, and inclusive work environment. Knowledge of Enventure's Health, Safety, Security, Environmental and Quality procedures, and processes. Observe and follow operational and QHSSE processes and procedures, and participation in behavior-based safety initiatives (Observations program) and hazard/risk mitigation (e.g., Job Safety Analysis). Performs various inspections, as required based on QC functional role (e.g., dimensional, visual, NDE, coating). Performs dimensional inspections based on functional role using, for example, OD/ID micrometers, groove micrometers, a FaroArm, thread gauges, calipers, and depth gauges. Performs visual inspections of API, premium, and non-premium threads. Performs coating inspections on tubulars using a mil thickness gauge. Generates inspection activity reports as prescribed. Completes documentation necessary to attest to satisfactory completion of inspection or test reporting. Resolves basic questions and report conditions and/or non-conformance to known standards. Reviews supporting documentation to compare specifications to MTRs or other supplier documentation to ensure compliance. Communicates with customer third party inspection, if necessary for role (e.g., Assembly Inspector). Generates and processes detailed Non-Conformance Reports (NCR), Internal Corrective Action Reports (CAR), or Supplier Corrective Action Reports (SCAR), and responds accordingly. Travels and performs inspections or other tasks at remote locations, as required. Performs other tasks as prescribed by Supervisor/Manager Scope of Job: Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations, and integrity of Enventure product performance. Consequences of error are easily measured and can be confined. Qualifications: Minimum 3-5 years: Quality Assurance and/or Control (QA/QC) experience, including documentation of quality procedures and quality inspection activities (preferred). Experience working with Enventure products and/or the oil/gas industry (preferred). Depending on functional role needs, inspector should possess an MPI (Level II Certification) and/or Dimensional and/or Thread Inspection experience/certification, which usually includes 3-5 years' experience. Minimum high school diploma or general education diploma qualification preferred; post-secondary certificate, diploma or degree from an accredited technical school or college or equivalent experience supported by applicable certification preferred.

Job Description Key Activities and Accountabilities Perform inspection (visual, dimensional, gauging and comparison as appropriate) on new manufactured, repaired and modified equipment and components pre, during and post qualification testing Raise Non-conformance Reports against non-conforming equipment / components and manufacturing, repair, modification quality records Work in accordance with Goods Inwards Quality Procedures Ensure inspection measuring equipment is kept safe, clean, fit for purpose and in current calibration Perform inspection surveys on returned operational equipment (Rosehill Resource and Customer owned) Perform Quality Control checks to Operations Support processes at key stages (i.e. prior to final shipment, job card completion etc.,) Perform Non Destructive Testing on components for certification purposes Witness pressure testing of equipment for certification to ensure that the tests are conducted to the required standards Job Knowledge and Qualifications Experience in a similar role - inspection of mechanical components & assemblies Trained and Experienced Internal Quality Auditor would be an advantage Good knowledge of workshop procedures and practices Knowledge of Risk Assessment/Job Card/Engineering Test Procedure compliance Able to display quality control/certification techniques Knowledge of MS Office (Excel, Word, Outlook & Teams) Ability to read and interpret drawings & technical documentation

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

About Company: Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent and ethical manner with fairness, sincerity and honesty Integrity: Create an empowered, engaging and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Delivers mission critical services at terminals and refineries across the oil, gas and petrochemical (“OG&P”) value chain, including both load and discharge operations Integral partner within the processing and transportation segments of the petroleum value chain Unique, service-focused culture combining industry leading technology with unparalleled customer service Camin has developed a state-of-the-art proprietary technology platform that enhances efficiency of services and helps customers minimize costs and expedite fuel / cargo transfers Industry Leading Technology Platform About the Role: The Junior Inspector plays a critical role in ensuring that business operations and services meet established quality and compliance standards within the Corpus Christi, TX area. This position involves conducting thorough inspections, identifying discrepancies, and reporting findings to support continuous improvement and regulatory adherence. The Junior Inspector will collaborate closely with senior inspectors and management to develop a comprehensive understanding of inspection protocols and industry regulations. This role serves as an entry point for developing expertise in inspection processes, contributing to the overall integrity and reputation of the organization. Ultimately, the Junior Inspector helps safeguard operational excellence by ensuring that all inspected entities comply with relevant business service standards. Minimum Qualifications: High school diploma or equivalent. Basic understanding of business operations and compliance standards. Strong attention to detail and observational skills. Ability to follow detailed instructions and protocols. Good written and verbal communication skills. Preferred Qualifications: Associate degree or coursework in business administration, quality assurance, or a related field. Previous experience in an inspection, auditing, or quality control role. Familiarity with local and federal regulatory requirements applicable to business services. Proficiency with inspection and reporting software tools. Certification in quality control or inspection methodologies. Responsibilities: Conduct detailed inspections of business service operations to verify compliance with company policies and regulatory requirements. Document inspection results accurately and prepare clear, concise reports highlighting any issues or areas for improvement. Assist senior inspectors in performing complex evaluations and audits as part of ongoing quality assurance initiatives. Communicate effectively with internal teams and external stakeholders to clarify inspection criteria and resolve identified concerns. Maintain up-to-date knowledge of industry standards, regulations, and best practices to support inspection activities. Skills: The Junior Inspector utilizes strong observational and analytical skills daily to identify compliance issues and ensure adherence to standards. Effective communication skills are essential for documenting findings clearly and collaborating with team members and external parties. Attention to detail is critical when conducting inspections and preparing reports to avoid overlooking potential risks or violations. Familiarity with relevant regulations and business processes enables the inspector to apply standards accurately and consistently. Additionally, proficiency with inspection software enhances efficiency in data collection and reporting, supporting timely decision-making and corrective actions.

Junior Petroleum Inspector Camin Cargo is a leading provider of inspection, testing, and certification services in the oil and gas industry. We are committed to ensuring the highest standards of safety, quality, and compliance for our clients worldwide. We are seeking an energetic Junior Petroleum Inspector to join our team and contribute to the success and growth of the organization. Position Summary The Junior Petroleum Inspector is responsible for conducting inspections and tests of various petroleum products to ensure compliance with industry standards and regulations. This role plays a crucial part in maintaining product quality and safety throughout our operations. This entry-level position provides a valuable opportunity for individuals looking to start their career in the oil and gas sector. Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Under supervision, responsible for measuring, gauging, and recording temperatures of various materials in shore tanks, as well as collecting samples from barges. Conduct field calculations in accordance with company guidelines and American Petroleum Institute (API) standards. Collect, label, and deliver samples to the laboratory promptly, in line with job requirements. Document inspection findings and prepare comprehensive reports for management review. Evaluate equipment, processes, and safety measures to ensure compliance with industry standards and regulatory requirements. Collaborate with the inspector trainer to identify opportunities for improvement and implement strategies to mitigate risks. All other job duties as defined. Minimum Requirements High School Diploma or equivalent. Basic understanding of safety regulations and quality control processes in petroleum operations. Strong math comprehension skills and attention to detail. Excellent communication and interpersonal skills with the ability to collaborate effectively with customers. Ability to work independently and as part of a team. Willingness to work in various outdoor environments and adhere to safety protocols. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours. Ability to work in outdoor environments, often in varying weather conditions. Ability to lift and carry up to 50 pounds. Frequent walking, climbing, and standing for extended periods. Candidates must be able to pass a Fit for Duty test, ensuring they are physically capable of performing job duties in a safe and efficient manner. Use of personal protective equipment (PPE) as required. All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

DynaServ, a Monarch Landscape Company Monarch Landscape Companies is a family of successful landscape brands in eight states across the United States. We are a values-based learning organization committed to being the best place to work as a landscape professional. At Monarch Landscape Companies, your achievements determine your rewards, your abilities define your success, and your professionalism leads to autonomy! JOB SUMMARY: The Landscape Inspector - National Division supports the organization's operational, quality, and client service objectives by conducting consistent, objective, and documented inspections across national account properties. Reporting to Area Manager, National, this role is responsible for evaluating landscape maintenance quality, verifying contract compliance, identifying safety concerns, and documenting deficiencies. The Landscape Inspector partners with Operations, Account Management, and Branch Leadership to support corrective actions, continuous improvement, and service standardization across multiple regions. MINIMUM QUALIFICATIONS: Education High school diploma required. Associate's degree or coursework in horticulture, landscape management, agriculture, or related field preferred. Experience 3-5 years of experience in landscape maintenance, inspections, quality control, or field operations. Experience supporting multi-site or national commercial accounts preferred. Experience working independently across multiple locations. License or Certification Valid driver's license required. Landscape Industry Certified, ISA, or equivalent preferred. Specialized Skills Strong knowledge of turf, horticulture, irrigation, pruning, and landscape best practices. Ability to interpret landscape contracts, scopes of work, and service specifications. Strong written documentation and reporting skills. Proficiency with mobile inspection tools, Microsoft Excel, Outlook, and Word. Strong attention to detail and objective assessment skills. Ability to use mobile applications Physical Requirements Frequently required to walk large commercial properties for extended periods. Ability to bend, kneel, climb, and inspect landscape elements. Ability to work outdoors in varying weather conditions. Occasionally required to lift up to 25 pounds. Work Conditions Primarily field-based across multiple commercial properties. Frequent regional or national travel, including overnight stays. Administrative and reporting work completed remotely or from branch offices. Regular interaction with Operations, Account Management, and Branch Leadership teams. Essential Duties & Responsibilities Conduct scheduled and unscheduled landscape inspections across national account properties. Evaluate turf health, horticultural quality, pruning practices, irrigation performance, hardscape conditions, and overall site appearance. Assess safety conditions, equipment usage, and adherence to OSHA and company safety standards. Identify deficiencies and assign corrective actions with defined timelines. Complete detailed inspection reports including photographs, scoring metrics, and observations. Track trends, recurring issues, and regional performance gaps. Maintain inspection records within company and client systems. Provide summary reports to National Operations and Leadership. Verify services align with contract scope, frequency, and specifications. Participate in client walkthroughs, audits, and performance reviews as required. Partner with Branch Leadership and Area Managers. Identify training and coaching opportunities. Support onboarding of new national account sites. Communicate operational risks and service barriers to leadership. TOTAL REWARDS At Monarch, we strive to deliver a Total Rewards package that will attract, engage, and retain top talent. Elements of our Total Rewards package include competitive base pay and variable compensation opportunities. Monarch also provides eligible employees with an array of additional benefits, including: The opportunity to enroll in a variety of healthcare benefit programs, including medical, dental, and vision plan options; flexible spending accounts; retirement savings plans; term life/ad&d; and a number of supplemental insurances Company Provided Life/AD&D Employee Assistance Program 7 Paid Holidays 3 Days Paid Bereavement 5 Days Paid Jury Duty Employee Equity Program Paid Time Off Starting at 2 weeks per year On-Demand Pay Through A Partnership with DailyPay Referral Bonuses Programs Gym Membership and Mobile Carrier Discounts Education Assistance Best-in-Class Learning Management System Career Advancement Opportunities The specific programs and options available to any given employee may vary depending on eligibility factors such as position, tenure, geographic location, and the applicability of collective bargaining agreements. Please note that the salary information shown below is provided in compliance with state specific laws. Salaries are based upon candidate experience and qualifications, as well as market and business considerations, and therefore may be different in other locations or operating divisions. Pay Range: $18 - $20 per hour DynaServ is an E-Verify participating employer DynaServ is an On Demand Daily Pay employer

Job Responsibilities include but are not limited to: Sprinkler Perform duties in a cost-effective manner while inspecting structures which contain Fire Sprinkler Systems Correctly complete all Inspection related documentation Develop working knowledge of applicable NFPA and common materials and installation processes. Maintain RME-I license as well as obtain and maintain TCEQ backflow licensing (B-PAT) Properly perform needed sprinkler system inspections and all associated components including, but not limited to, Wet, Dry, Fire Pumps, Pre-action, Deluge, Antifreeze Loops, backflows, etc. Cross-train additional licensing duties in order to obtain multiple licenses Alarm Develop working knowledge of applicable NFPA standards Correctly complete all inspection related documentation Perform duties in a cost-effective manner while inspecting structures which contain Fire Alarm Systems Properly perform needed alarm system inspections and all associated components Cross-train additional licensing duties in order to obtain multiple licenses Extinguisher/Hood/Special Hazard Develop working knowledge of applicable NFPA standards and manufacturer installation manuals and requirements Correctly complete all inspection related documentation Perform duties in a cost-effective manner while inspecting structures which contain Fire Extinguishers, Hood Suppression Systems, and/or Special Hazard (dependent upon license held) Properly perform needed extinguisher/suppression system inspections and all associated components Cross-train additional licensing duties in order to obtain multiple licenses Super Tech Holds all Fire licenses, including, RME-I, FAL, FEL-A, B-PAT (Backflow Preventer) Lead large inspections and special projects with multiple techs or solo Perform duties in a cost-effective manner while inspecting structures which contain multiple facets of fire protection Assist and/or fill in for inspection manager as required Mentor lower level technicians during their quest for additional licenses and knowledge Expectations: Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily Safety First Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc. Ensure timely and accurate Incident and Accident Reporting Hold yourself accountable for all Safety Initiatives Hold yourself accountable for Safe Driving of Company Vehicles Ensure awareness and support of Stop Work Authority Complete all Training Requirements - Safety, Certifications, etc. Submit accurate Timesheet - job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal Ensure all required documents are complete, accurate and professional, with required signatures Ensure proper Inventory Management - review, update, and approve packing slips - submitted timely, proper material management Ensure proper Maintenance and care of equipment - trucks, lifts, tools, etc. Keep jobsites clean and organized Ensure Production Efficiency - awareness of budget vs. actual labor hours and proactive communication with superintendent Support and Ensure Adherence to Company SOPs - Purchase Orders, Change Orders, etc. Timeliness - at the job on time; attendance; communication with supervisor; paperwork Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities Maintain Quality Control i.e. reduce the need for return trips and warranty work Maintain a Professional appearance Communicate effectively and professionally within the department and with internal and external customers Teamwork - maintain positive interactions within your team, local office, etc. Actively Participate in required team meetings Ability to work overtime, out of town or on-call as needed Knowledge: Minimum education of High School Diploma or Equivalent Required NICET level for their trade and applicable/current TX Dept of Insurance license Strong understanding of materials, tools equipment, and procedures used in the installation process, plus working knowledge of NFPA standards Current and clear TX DL and clean driving record as well as applicable criminal background Work Experience: Sprinkler Minimum of 5 years experience (install/service experience is a plus) Alarm Minimum of 3 years experience (install/service experience is a plus) Extinguisher Minimum of 2 years experience Hood Suppression Minimum of 3 years experience Special Hazard Minimum of 5 years experience and must have FAL license and work experience Skills and Competencies: Ability to take direction from upper management Accurately complete and maintain all paperwork Maintain vehicle and tools as per company policy Must have valid state driver's license and good driving record Willing and able to perform testing and maintenance Willing to identify and notate inspection deficiencies and service required to correct found deficiencies Able to work effectively in a team environment; ability to accurately work under pressure in meeting scheduled time frames. Capability to work independently and complete duties and projects with moderate supervision (a must) Strong customer service skills Meticulous attention to detail Excellent oral and written communication skills Maintain a clean and safe work environment Comply with and embrace all Core Values and the safety handbook

As an API Inspector, you will provide our customers with technical recommendations on repairs, replacement and alterations needed for specific equipment and abide by American Petroleum Institute (API) standards. Applicants must have minimal experience: 5 years with all inspection activities related to the mechanical integrity program of a refinery. Job responsibilities include performing or coordinating the following: Perform 510 and 570 inspection work throughout facility units Provide technical input and create inspection reports Provide technical guidance on NDT (Non-Destructive testing) practices Qualifications: Must have active API 510 and 570 certifications 5-8 years of API experience Previous Non-Destructive testing experience Proficient in Microsoft Office applications including Word, Excel, Power Point, and Outlook Must pass DISA background, dug and alcohol screens Must posses' valid driver's license and TWIC card Self-motivated with good written and verbal communication skills with a positive team-oriented attitude Pinnacle participates in E-Verify, a federal government system used to verify employment authorization and social security number of each new employee. Pinnacle is an equal employment opportunity employer and does not discriminate based on race, color, national origin, religion, gender identity, sexual orientation, sex, age, disability, veteran or military status, genetic information, or any other characteristic protected by applicable law.

(Entry Level) Wet Magnetic Particle Inspector Job Shift: Day Shift Job Type: Full Time (hourly) Lincoln Manufacturing is currently seeking a qualified candidate to fill the position of Wet Magnetic Particle Inspector at our Houston, TX location on Beaumont Highway. The Wet Magnetic Particle Inspector is accountable for the function, duties, responsibilities, and performance defined in this job description. Responsibilities/Job Duties * Perform wet fluorescent magnetic particle inspection per ASTM E709. * Verify equipment calibration and inspection conditions. * Interpret and evaluate indications based on acceptance criteria. * Maintain inspection records and traceability. * Segregate and identify nonconforming material. * Maintain a clean and safe inspection area. * Communicate inspection results to supervision. * Perform other duties as assigned. Qualifications * High school diploma/GED or comparable experience. * Must be able to stand for long periods of time and perform stationary work for the majority of the shift. * Basic computer skills * Knowledgeable in QA/QC concepts and methodologies. Previous experience in a manufacturing environment preferred. * SNT-TC-1A compliant training and certification. * Ability to meet vision and physical requirements. * Familiar with API 5CT, ISO 9001, and other relevant industry specifications. * Punctual and dependable * Requires strong oral and written communication skills. BENEFITS * Medical, Dental, Vision, Life, Disability, and Accident (eligibility - 1st of the month after 60 days of employment) * Paid Time Off * Paid Holidays LMI is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, sexual orientation, gender identity, disability, or nationality.

RMS is seeking a skilled and experienced Inspector to ensure the quality and reliability of customer-supplied bearings and associated components. This role requires a keen attention to detail, technical expertise, and the ability to collaborate effectively within the team and with customers. The Inspector will have a strong mechanical aptitude, an attention to detail, and the ability to work independently or as part of a team. JOB REQUIREMENTS AND QUALIFICATIONS Perform incoming inspection of customer-supplied bearings. Maintain a keen eye for detail when inspecting incoming and finished parts, able to identify and document both minor and major imperfections. Use a V-Ohm meter as needed to identify temperature element types. Diligently fill out RMS or customer-provided documentation. Be accurate with precision measuring hand-tools (ID/OD Mics, Calipers, etc.), ensuring required measurements/documentation in the tenths. Have UT/NDT experience; current Level II certification is a plus. Be a quick learner able to identify various Bearing and Seal components. Expertly use files, small grinders, etc., as needed to perform final ‘detailing' of new or repaired components. Be chiefly responsible for performing final/outbound quality inspections on all parts, including dimensional and visual reviews, final photos, etc. Be familiar with shipping documentation and accurately create packing lists for to-be-shipped goods. Comply with RMS packaging and shipping standards, prepping & boxing parts for final shipment. Work with GM and Sales as needed to develop Inspection Findings and Repair Recommendations. Once fully trained, travel to Houston/local RMS shops to perform in-place inspections of customer material. The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inspector. This list is subject to change based on the needs of the company. Knowledge and/or Skill Requirements: Previous experience in quality inspection, particularly with bearings and seals, is highly desirable. UT/NDT experience with a current Level II certification is a plus. Education: High School Diploma/GED from an accredited school. OTHER INFORMATION The position will be based full time in our South Houston, TX BJ Superior Shop This is a full-time position, with a minimum expectation of 40+ hours per week. Additional hours, including evenings or weekends maybe required based on business need. This position can be required to participate in the company random or customer specific drug and alcohol screening and background check. Able to understand, read, write, and speak English. Must possess a valid driver's license. Must be able to legally work in the US and provide proper documentation. Able to pass a pre-employment drug, alcohol test and background check. This position can be required to participate in the company random or customer specific drug and alcohol screening and background check. Ability and willingness to lift objects weighing up to 30 lbs., 50 lbs. with assistance. Ability to walk, climb, reach above head, and balance. RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. Physical Requirements: While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50lbs. with assistance, walk, climb, reach above head, and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Tool, Shoe, and Safety Glasses reimbursement Uniform Service Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Responsibilities include but are not limited to: Fire Sprinkler Perform duties in a cost-effective manner while inspecting structures which contain Fire Sprinkler Systems Correctly complete all Inspection related documentation Develop working knowledge of applicable NFPA and common materials and installation processes. Maintain RME-I license as well as obtain and maintain TCEQ backflow licensing (B-PAT) Properly perform needed sprinkler system inspections and all associated components including, but not limited to, Wet, Dry, Fire Pumps, Pre-action, Deluge, Antifreeze Loops, backflows, etc. Cross-train additional licensing duties in order to obtain multiple licenses Additional Preferred Licenses: Fire Alarm Develop working knowledge of applicable NFPA standards Correctly complete all inspection related documentation Perform duties in a cost-effective manner while inspecting structures which contain Fire Alarm Systems Properly perform needed alarm system inspections and all associated components Cross-train additional licensing duties in order to obtain multiple licenses Extinguisher/Hood/Special Hazard Develop working knowledge of applicable NFPA standards and manufacturer installation manuals and requirements Correctly complete all inspection related documentation Perform duties in a cost-effective manner while inspecting structures which contain Fire Extinguishers, Hood Suppression Systems, and/or Special Hazard (dependent upon license held) Properly perform needed extinguisher/suppression system inspections and all associated components Cross-train additional licensing duties in order to obtain multiple licenses Super Tech Holds all Fire licenses, including, RME-I, FAL, FEL-A, B-PAT (Backflow Preventer) Lead large inspections and special projects with multiple techs or solo Perform duties in a cost-effective manner while inspecting structures which contain multiple facets of fire protection Assist and/or fill in for inspection manager as required Mentor lower level technicians during their quest for additional licenses and knowledge Expectations: Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily Safety First Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc. Ensure timely and accurate Incident and Accident Reporting Hold yourself accountable for all Safety Initiatives Hold yourself accountable for Safe Driving of Company Vehicles Ensure awareness and support of Stop Work Authority Complete all Training Requirements - Safety, Certifications, etc. Submit accurate Timesheet - job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal Ensure all required documents are complete, accurate and professional, with required signatures Ensure proper Inventory Management - review, update, and approve packing slips - submitted timely, proper material management Ensure proper Maintenance and care of equipment - trucks, lifts, tools, etc. Keep jobsites clean and organized Ensure Production Efficiency - awareness of budget vs. actual labor hours and proactive communication with superintendent Support and Ensure Adherence to Company SOPs - Purchase Orders, Change Orders, etc. Timeliness - at the job on time; attendance; communication with supervisor; paperwork Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities Maintain Quality Control i.e. reduce the need for return trips and warranty work Maintain a Professional appearance Communicate effectively and professionally within the department and with internal and external customers Teamwork - maintain positive interactions within your team, local office, etc. Actively Participate in required team meetings Ability to work overtime, out of town or on-call as needed Knowledge: Minimum education of High School Diploma or Equivalent Required NICET level for their trade and applicable/current TX Dept of Insurance license Strong understanding of materials, tools equipment, and procedures used in the installation process, plus working knowledge of NFPA standards Current and clear TX DL and clean driving record as well as applicable criminal background Work Experience: Sprinkler Minimum of 5 years experience (install/service experience is a plus) Alarm Minimum of 3 years experience (install/service experience is a plus) Extinguisher Minimum of 2 years experience Hood Suppression Minimum of 3 years experience Special Hazard Minimum of 5 years experience and must have FAL license and work experience Skills and Competencies: Ability to take direction from upper management Accurately complete and maintain all paperwork Maintain vehicle and tools as per company policy Must have valid state driver's license and good driving record Willing and able to perform testing and maintenance Willing to identify and notate inspection deficiencies and service required to correct found deficiencies Able to work effectively in a team environment; ability to accurately work under pressure in meeting scheduled time frames. Capability to work independently and complete duties and projects with moderate supervision (a must) Strong customer service skills Meticulous attention to detail Excellent oral and written communication skills Maintain a clean and safe work environment Comply with and embrace all Core Values and the safety handbook

Description: Summary/Objective The general laborer position performs all tasks involved in the delivery of the company's services. The position follows standard work methods and practices safe work habits to ensure services are as efficient and safe as possible. Supervisory Responsibilities: None Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accurately tagging work to maintain operation flow. Inspecting parts and tools routinely for proper calibration. Request tools, parts and supplies in a timely fashion, as necessary, to maintain operational flow and inventory counts. Accurately track production and calibration on correct forms. Perform cleaning operations using detergent baths, degreasing, grit blasting, wire brushing, etc. Place finished goods on the designated rack. Notify supervisor of any mechanical, leaking or material issues in a timely fashion. Coordinate and expedite repair/assembly operations with Inspection Manager. Evaluate self-work to ensure compliance with work instructions and standards. Log completed work and prepare necessary documentation. Maintain a clean, organized and safe work area to reflect a positive image of themselves and the company. All personal protective equipment (PPE) must be inspected by the employee and worn upon direction of supervisors, managers, and the safety manager. Participate in mandatory safety or PPE training and notify their supervisor when new PPE is necessary. Maintain a clean, neat and groomed personal appearance to reflect a positive image of themselves and the company. All duties as assigned. Requirements: Physical Abilities Physical stature must be such that the individual can operate a machine eight (8) to twelve (12) hours per day. No reoccurring physical problems that could be aggravated by this type of work. Good visual acuity. Competencies Mathematics. Teamwork Orientation. Time Management. Technical Capacity. Work Environment While performing the duties of this job, the employee may be exposed to fumes, particles, moving mechanical parts, vibration, heat, cold, rain, wind and a variety of other extreme conditions. The noise level in the work environment can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand. The employee is frequently required to use hands to portion, handle, or feel objects, tools, or controls and to climb or balance. The employee is occasionally required to walk; reach with hands and arms; stoop, kneel, crouch or crawl; and talk or hear. The employee must regularly lift and move up to 10 pounds, frequently lift and move up to 25 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus. Position Type/Work Schedule This is a full-time non-exempt hourly position, and the days of work are Monday through Friday. Occasional weekends and/or holidays may be scheduled. Employee may be scheduled to work overtime and be available for emergency overtime when the need arises. Education and Experience High school diploma or GED is preferred. Similar oil production experience is preferred. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

NDT Inspector About PROENERGY PROENERGY is a global and vertically integrated energy transition platform. Focused exclusively on fast-start, dispatchable power, our company supports both energy security and renewable growth with complete turbine services, project development, equipment manufacturing, turnkey generation facilities, operations, and maintenance. Our Footprint We are primed for the energy transition with permanent service locations in Missouri, Texas, and Argentina. Our world-class Missouri headquarters is purpose-built to meet dispatchable power needs. It sits on 90 acres in Sedalia and features more than 600,000 sq. ft of service capacity under roof, which includes the only independent Level-IV aeroderivative depot and string-test facility in the world. Our Houston, Texas, office is a strategic satellite positioned near our own dispatchable power installations. Our Philosophy We take care of our people and strive to make a positive difference for the world. We offer competitive pay, excellent benefits that include Medical, Dental, Vision, and Life/Disability Insurance at minimal cost to the employee, 10 paid holidays, paid time off, and a 401K plan. If you are looking for a rewarding career and possess specialized knowledge and quality-oriented problem-solving skills, we encourage you to apply today. The NDT Inspector is accountable for the quality, cost, and schedule of inspection operations for as-received, work-in-progress (WIP), and final inspections. Inspection scope includes repaired and new make parts for both turbine engine parts and power generation package parts. Reports To: ARM Supervisor Work Location: 6401 North Eldridge Pkwy, Houston, TX 77041 Position Responsibilities Receive orders and validate part quantities and completeness of instructions. Perform dimensional inspection. Perform Visual Testing (VT), Fluorescent Penetrant Inspections (FPI) / Liquid Penetrant Inspection (LPI) Perform Eddy current testing (ET) Magnetic Particle Testing (MPT) / Magnetic Particle Inspection (MPI) Radiographic Testing (RT) / X-Ray Set up and calibrate NDT equipment. Perform preventive maintenance on NDT equipment. Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection. Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations. Apply testing criteria in accordance with applicable specifications or standards and evaluate results. Organize, record, report, and file NDT test results. Perform other job tasks as assigned by supervision. Maintain an accurate log of applied hours by NDT discipline to support advancement in certification levels and/or methods. Pass certification tests in applicable NDT methods to advance skills and position level. Operate cranes and vehicles. Required Qualifications High School Diploma or equivalent, some college preferred. Must have Minimum 3 years performing NDT Inspector work. US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa. Successful candidate will need to satisfactorily complete pre-employment drug screen and background check. Desired Qualifications Mechanical aptitude and use strong working knowledge of common hand tools. Read and interpret drawings and specifications. NDT Certification Educational background in NDT Technical understanding of NDT methods and procedures used in the Power and Aero Industries. Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections. Exceptional attention to detail. Ability to follow directions and procedures. It is PROENERGY's policy to provide equal opportunity in employment to all its employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, national origin, marital status, ancestry, medical condition, military status, or any other characteristic protected by State or Federal law.

Job Responsibilities include but are not limited to: Sprinkler Perform duties in a cost-effective manner while inspecting structures which contain Fire Sprinkler Systems Correctly complete all Inspection related documentation Develop working knowledge of applicable NFPA and common materials and installation processes. Maintain RME-I license as well as obtain and maintain TCEQ backflow licensing (B-PAT) Properly perform needed sprinkler system inspections and all associated components including, but not limited to, Wet, Dry, Fire Pumps, Pre-action, Deluge, Antifreeze Loops, backflows, etc. Cross-train additional licensing duties in order to obtain multiple licenses Alarm is a plus Develop working knowledge of applicable NFPA standards Correctly complete all inspection related documentation Perform duties in a cost-effective manner while inspecting structures which contain Fire Alarm Systems Properly perform needed alarm system inspections and all associated components Cross-train additional licensing duties in order to obtain multiple licenses Extinguisher/Hood/Special Hazard Develop working knowledge of applicable NFPA standards and manufacturer installation manuals and requirements Correctly complete all inspection related documentation Perform duties in a cost-effective manner while inspecting structures which contain Fire Extinguishers, Hood Suppression Systems, and/or Special Hazard (dependent upon license held) Properly perform needed extinguisher/suppression system inspections and all associated components Cross-train additional licensing duties in order to obtain multiple licenses Super Tech Holds all Fire licenses, including, RME-I, FAL, FEL-A, B-PAT (Backflow Preventer) Lead large inspections and special projects with multiple techs or solo Perform duties in a cost-effective manner while inspecting structures which contain multiple facets of fire protection Assist and/or fill in for inspection manager as required Mentor lower level technicians during their quest for additional licenses and knowledge Expectations: Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily Safety First Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc. Ensure timely and accurate Incident and Accident Reporting Hold yourself accountable for all Safety Initiatives Hold yourself accountable for Safe Driving of Company Vehicles Ensure awareness and support of Stop Work Authority Complete all Training Requirements - Safety, Certifications, etc. Submit accurate Timesheet - job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal Ensure all required documents are complete, accurate and professional, with required signatures Ensure proper Inventory Management - review, update, and approve packing slips - submitted timely, proper material management Ensure proper Maintenance and care of equipment - trucks, lifts, tools, etc. Keep jobsites clean and organized Ensure Production Efficiency - awareness of budget vs. actual labor hours and proactive communication with superintendent Support and Ensure Adherence to Company SOPs - Purchase Orders, Change Orders, etc. Timeliness - at the job on time; attendance; communication with supervisor; paperwork Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities Maintain Quality Control i.e. reduce the need for return trips and warranty work Maintain a Professional appearance Communicate effectively and professionally within the department and with internal and external customers Teamwork - maintain positive interactions within your team, local office, etc. Actively Participate in required team meetings Ability to work overtime, out of town or on-call as needed Knowledge: Minimum education of High School Diploma or Equivalent Required NICET level for their trade and applicable/current TX Dept of Insurance license Strong understanding of materials, tools equipment, and procedures used in the installation process, plus working knowledge of NFPA standards Current and clear TX DL and clean driving record as well as applicable criminal background Work Experience: Sprinkler Minimum of 5 years experience (install/service experience is a plus) Alarm Minimum of 3 years experience (install/service experience is a plus) Extinguisher Minimum of 2 years experience Hood Suppression Minimum of 3 years experience Special Hazard Minimum of 5 years experience and must have FAL license and work experience Skills and Competencies: Ability to take direction from upper management Accurately complete and maintain all paperwork Maintain vehicle and tools as per company policy Must have valid state driver's license and good driving record Willing and able to perform testing and maintenance Willing to identify and notate inspection deficiencies and service required to correct found deficiencies Able to work effectively in a team environment; ability to accurately work under pressure in meeting scheduled time frames. Capability to work independently and complete duties and projects with moderate supervision (a must) Strong customer service skills Meticulous attention to detail Excellent oral and written communication skills Maintain a clean and safe work environment Comply with and embrace all Core Values and the safety handbook