Weld inspector full time jobs - 130 jobs

We are currently seeking candidates who are certified Lead Inspectors/Risk Assessors . This position is ideal for individuals with strong organizational skills and excellent verbal and written communication abilities. The Lead Inspector/Risk Assessor will be responsible for conducting inspections following EPA and HUD's Chapter 7: Lead-Based Paint Inspection Standards. Positions available in multiple states. Responsibilities Perform all types of Lead-Based Paint (LBP) inspections: Initial Inspections, Annual Inspections, Re-Inspections, Complaint Inspections, Abatement Inspections. Utilize X-ray fluorescence (XRF) technologies in private and public housing units in accordance with EPA and HUD Chapter 7: Lead-Based Paint Inspection guidelines. Conduct Visual Inspections of paint conditions in buildings. Collect dust and paint samples as required by various regulatory agencies, complete data sheets, and chain of custody forms, and prepare samples for shipment to the laboratory. Ensure accurate documentation of field paperwork. Prepare inspection reports (including diagrams and calibration) in accordance with applicable city, state, and federal regulations, promptly and accurately. Maintain professionalism in both appearance and communication. Maintain a good attendance record, including punctuality to scheduled appointments and in-office meetings. Adhere to company quality assurance and quality control requirements. Perform other related duties as assigned. Requirements 2-5 years experience as a licensed Lead Inspectors/Risk Assessor - with no history of violations/disciplinary actions by any State Licensing Board or Professional Trade Organization Experience operating an XRF instrument (preferably Viken Detection Pb200i Handheld XRF Lead Paint Analyzer) for use in LBP inspections or willingness to learn. Experience with procedures for collecting lead paint chip samples or willingness to learn. Flexibility to various work schedules and situations related to emergency response scenarios. Ability to complete inspections and subsequent paperwork independently, as well as occasionally working onsite and in the office with other team members. Ability to carry and climb ladders and use hand and power tools. Ability to wear a respirator, safety harness, and other safety equipment as needed. Strong commitment to punctuality and reliable attendance. Solid verbal communication skills. Maintain confidentiality regarding all company operations and sensitive information. High school diploma or GED certificate. Ability to travel as needed - Current driver's license. Must be available to drive during all working hours. Dependable transportation and adequate automobile liability insurance on the vehicle used to perform the job. Must pass a motor vehicle records check. Willingness/ability to use hand-held tablets for field inspections. Self-starter and able to work independently. Ability to work simultaneously on multiple projects with tight deadlines. Notes Salary: Negotiable, based on experience - contract/performance based Licensing support available through training programs Standard license fee for Lead Risk Assessor is $250 (can be covered by grant for eligible applicants) Standard license fee for Lead Inspector is $250 (can be covered by grant for eligible applicants) About Us Clarendon is a trusted partner for government compliance and advisory solutions, specializing in HUD-compliant services: HUD RCS, appraisals, brokerage, inspections, facility support and strategic guidance for agencies, housing authorities and property owners nationwide. As a cutting edge firm, we place great value on creative and innovative solutions offered to traditional problems and approaches. We employ a team approach to problem solving that ensures that our clients objectives are always at the forefront and believe our people are our greatest asset. If you possess a desire to enhance your career in commercial real estate and welcome a challenging independent position, consider an opportunity with our firm. Information Guidelines Any information you provide to Clarendon must be complete and accurate. Privacy Statement If you accept an offer of employment with Clarendon, the information provided in your application and/or candidate profile and any other information collected in the course of the application and selection process will be stored in our applicant database. Employment Screening As part of our recruitment process, we conduct background screening checks for candidates applying for roles with Clarendon in accordance with regulatory, local legislative, and geographic requirements. Must be authorized to work full-time in the U.S.A.

Atlas is a nationwide leader in civil engineering materials testing and geotechnical consulting services for environmental industrial and infrastructure construction projects Headquartered in Denver CO Atlas currently has over 3500 employees with offices throughout the US including Alaska & Hawaii Its no accident that Atlas creates a better experience for infrastructure and environmental projects Its how we are built with the best people in the industry with the reach and expertise to help at any and every step of the project and with a heart led approach that puts quality and safety at the center of everything we do Were just built to be better We are a great company Atlas is looking for a Certified Weld Inspector for full time inspections on large data center projects The ideal candidate will have an active CWI as well as NDT certifications Job responsibilities include but are not limited to Perform field testing and inspection of construction materials and activities and accurately record test results and daily field observations Perform all job functions within Atlas safety guidelines Ability to accurately follow verbal and written instructions Reasoning mathematical and language skills read write and speak acceptable business EnglishStrong interpersonal skills Physical strength stamina and dexterity to lift and move 70 lbs stop bend and stand throughout the course of up to a 12 hour workday in varying weather conditions in varying terrain Valid Drivers license with good driving record required Familiar with Microsoft Office Word and Excel a plus Experience in Construction Quality Assurance is a must Ability to travel as necessary for job related duties Ability to pass criminal background checks Current AWS CWIMinimum requirements Willingness to travel for long periods throughout the midwestern United StatesCurrent Certified Weld InspectorNDT Level II in Ultrasonic Testing preferred Technical requirements Active CWIBasic computer skills Thorough knowledge of plan reading Other miscellaneous qualities Ability to travel for long term assignments throughout the MidwestBenefits Atlas offers a comprehensive benefit program to meet the diverse needs of our employees Depending on your employment status Atlas benefits include health dental vision life AD&D voluntary life AD&D disability benefits leaves of absence 401k paid time off paid holidays employee assistance program educational assistance program Who We Are We strive to be the most sought after infrastructure and environmental solutions company known for our unique values driven approach and brought to life by the industrys most exceptional people Atlas provides professional testing inspection engineering environmental and consulting services from more than 100 locations nationwide We deliver solutions to both public and private sector clients in the transportation commercial water government education and industrial markets With a legacy of providing consistent quality and results Atlas creates a better experience at every stage of an infrastructure project We connect the best experts in the industry to deliver value from concept to completion and beyond This means doing everything our clients expect and then raising the expectations in a way that only our people can Our Values Life We enhance quality of life We value people and safety above all else Heart As our hallmarks we act with compassion empathy and respect Trust We work together as partners doing what we say with full accountability Mastery Always striving for the highest quality we ensure greatness inspires all our work Atlas EEOC Statement Atlas is an equal opportunity employer We prohibit discrimination and harassment of any kind based on race color sex religion sexual orientation national origin disability genetic information pregnancy or any other protected characteristic as outlined by federal state or local laws This policy applies to all employment practices within our organization including hiring recruiting promotion termination layoff recall leave of absence compensation benefits training and apprenticeship Atlas makes hiring decisions based solely on qualifications merit and business needs at the time For more information read through our EEO Policy httpswwweeocgovsitesdefaultfiles2023 0622 088EEOCKnowYourRights612ScreenRdrpdf

Employment Type: Full-Time Shift: 1st Shift Pay Range: $23-$27 per hour At Elmet Technologies, a subsidiary of The Elmet Group, we manufacture precision-engineered products for industries where quality, reliability, and performance matter-defense, aerospace, semiconductor, and energy. The Quality Inspector I plays a hands-on role in ensuring rolled, machined, and fabricated products meet customer requirements and internal quality standards, while supporting production flow on the manufacturing floor. What You'll Do • Perform dimensional, physical, and visual inspections of manufactured product • Use micrometers, calipers, gauges, and automated inspection equipment (CMMs, laser flatness testing, surface perthometers) • Conduct ultrasonic and dye penetrant inspections, as required • Complete first article inspections prior to full-scale production • Accurately document inspection results and production data in SAP and related systems • Support production schedules by completing inspections on time and moving product efficiently to the next work center • Follow all quality, safety, and environmental policies and procedures What We're Looking For • High school diploma or equivalent • Manufacturing or machining experience preferred • Working knowledge of GD&T • Ability to interpret inspection data and explain results clearly • Proficiency in Microsoft Word, Excel, and PowerPoint • ASQ Certified Quality Inspector (CQI) certification or willingness to obtain • Willingness to obtain ultrasonic and dye penetrant inspection certifications, if required Why Join Elmet Technologies • Be part of a quality-driven manufacturing organization • Work with advanced inspection tools and technology • Support industries where precision and reliability are critical • Opportunities to build certifications, skills, and career growth • Competitive hourly pay and comprehensive benefits Benefits • Medical, Dental, and Vision Insurance • 401(k) with company match • Paid Time Off • Life and Disability Insurance • Flexible Spending Accounts (FSA) and Health Savings Account (HSA) The Elmet Group is managing this search directly and is not accepting submissions from outside recruitment firms. Elmet Technologies is an Equal Opportunity Employer and a proud federal contractor. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, protected veteran status, or any other status protected by law.

Atlas is a nationwide leader in civil engineering, materials testing and geotechnical consulting services for environmental, industrial and infrastructure construction projects. Headquartered in Denver, CO, Atlas currently has over 3,500 employees with offices throughout the US, including Alaska & Hawaii. It s no accident that Atlas creates a better experience for infrastructure and environmental projects. It s how we are built with the best people in the industry, with the reach and expertise to help at any and every step of the project, and with a heart-led approach that puts quality and safety at the center of everything we do. We re just built to be better. We are a great company. Atlas is looking for a Certified Weld Inspector for full time inspections on large data center projects. The ideal candidate will have an active CWI as well as NDT certifications. Job responsibilities include but are not limited to: Perform field testing and inspection of construction materials and activities and accurately record test results and daily field observations Perform all job functions within Atlas safety guidelines Ability to accurately follow verbal and written instructions Reasoning, mathematical and language skills (read, write and speak acceptable business English) Strong interpersonal skills Physical strength, stamina and dexterity to lift and move 70 lbs., stop, bend and stand throughout the course of up to a 12-hour workday in varying weather conditions in varying terrain Valid Driver s license with good driving record required Familiar with Microsoft Office (Word and Excel) a plus Experience in Construction Quality Assurance is a must Ability to travel as necessary for job related duties Ability to pass criminal background checks Current AWS CWI Minimum requirements: Willingness to travel for long periods throughout the midwestern United States. Current Certified Weld Inspector NDT Level II in Ultrasonic Testing preferred Technical requirements: Active CWI Basic computer skills Thorough knowledge of plan reading Other miscellaneous qualities: Ability to travel for long term assignments throughout the Midwest Benefits: Atlas offers a comprehensive benefit program to meet the diverse needs of our employees. Depending on your employment status, Atlas benefits include health, dental, vision, life, AD&D, voluntary life / AD&D, disability benefits, leaves of absence, 401k, paid time off, paid holidays, employee assistance program, educational assistance program. Who We Are: We strive to be the most sought-after infrastructure and environmental solutions company, known for our unique, values-driven approach and brought to life by the industry s most exceptional people. Atlas provides professional testing, inspection, engineering, environmental and consulting services from more than 100 locations nationwide. We deliver solutions to both public and private sector clients in the transportation, commercial, water, government, education and industrial markets. With a legacy of providing consistent quality and results, Atlas creates a better experience at every stage of an infrastructure project. We connect the best experts in the industry to deliver value from concept to completion and beyond. This means doing everything our clients expect and then raising the expectations in a way that only our people can. Our Values: Life: We enhance quality of life. We value people and safety above all else. Heart: As our hallmarks, we act with compassion, empathy and respect. Trust: We work together as partners, doing what we say with full accountability. Mastery: Always striving for the highest quality, we ensure greatness inspires all our work. Atlas EEOC Statement Atlas is an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Atlas makes hiring decisions based solely on qualifications, merit, and business needs at the time. For more information, read through our EEO Policy ********************************************************************************************

Take Your Construction Career to the Next Level! Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Construction Services team is looking for you! From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. Step into Your New Role Kleinfelder is seeking qualified, responsible candidates for the position of Special Inspector/Materials Testing Technicians to work on projects in the Bowling Green, Ohio metropolitan area. We need inspectors and technicians who are comfortable being actively engaged on construction sites performing special inspections and testing of construction materials in the field. This role offers a dynamic work environment, the opportunity to work on a high-profile project, and be part of an industry leading company. This position can work on a full-time, part-time or flex basis. At Kleinfelder, we provide opportunities for each person to use their expertise and talents, grow professionally, and make an impact each and every day. We know our employees' commitment, pride, and passion contributes to the success of the company and to the successes of our clients. Hard work should reap rewards and build for the future-yours and ours. In addition to the opportunity to work on some of the largest and most interesting projects in the area, Kleinfelder also offers: * Competitive Wages; * Benefits, including medical, dental, vision, & life insurance; HSA & FSA; 401K; paid holidays; and paid time off (PTO); * Certification training and professional development (ICC, ACI, AWS, etc.); * Employee referral bonuses; * Career advancement opportunities with one of the largest and most respected firms in the industry. If you are looking for a CAREER opportunity, to development your professional skills, enhance your technical certifications, and work on resume building projects; then we want to talk to you! Kleinfelder recognizes our staff as the key to our success. Our employees are the backbone of an integrated company that provides innovative, dependable, and sustainable solutions for our clients. Accordingly, we partner with our staff to establish and achieve career development goals designed to build your professional experience and technical confidence by helping you obtain additional inspection and testing certifications. Why Join Us? * Career Development: Comprehensive training program to obtain industry-recognized certifications, including ACI, ICC, NICET, and others. Certification leads to immediate pay increases. * Exposure to Landmark Projects: Contribute to high-profile projects with significant impact and visibility. * Travel Opportunities: Explore new cities and regions while working on diverse construction projects. * Competitive Compensation and Benefits: We offer competitive salaries, paid travel expenses, and a robust benefits package. Minimum requirements for the role of Special Inspector should have at least one of the following certifications or experience (or able to obtain within first 6 months): * 2+ years of special inspection and/or construction materials testing experience. * Radiation safety training for the operation of a nuclear density gauge. * ACI Concrete Field-Testing Technician - Grade 1 * Valid driver's license and clean driving record * Use a company provided laptop or tablet computer and a working knowledge of MS Office programs (e.g., Word, Excel, Outlook, etc.). * High school diploma or equivalent. * A good work ethic and high level of personal integrity. * Ability to monitor contractors and report results verbally and in writing. * Proficiency in preparing clear and accurate detailed reports of testing and inspection activities and maintaining work activity records. * Attention to detail, quality, and safety. * Authorization to work in the United States. In addition to the above required certifications, hiring preference will be given to those with any of the following desired certifications: * ICC Special Inspector Certifications (Reinforced Concrete, Pre-stressed Concrete, Soil, Spray-applied Fireproofing, Structural Masonry, Structural Welding, Structural Steel and Bolting), * Certified Welding Inspector (CWI) - American Welding Society (AWS), This position requires the ability to: * Bend, stoop, and lift up to 50 pounds (22.68 kg) repetitively and over 50 pounds (22.68 kg) using handling equipment (hand truck, etc.). * Operate heavy equipment as necessary (i.e., ultrasonic non-destructive testing machine, concrete cylinder press, etc.). * Maintain safe mobility over construction obstacles by foot and ladder, traversing over rough broken ground and steep surfaces. * Work outside in variable weather at field sites and in labs with various levels of safety protection required. Responsibilities include but are not limited to: * Perform field observations and materials sampling/testing during construction of buildings, bridges, and roadways. * Perform testing on construction materials including, soils, reinforcing steel, concrete, masonry, structural steel, fireproofing, metal decking, and paving. * Write daily field reports documenting work performed by the various contractors and indicating compliance/non-compliance with contract documents. * Cast field samples of concrete, masonry, grout, etc. for strength verification. * Provide daily phone calls to Department Manager to inform of daily progress of the project. * Pick-up construction material samples and deliver to laboratory, deliver equipment to site technicians. * Implementation of the Client's Project Management Plan, KLF's Quality Management Plan, contract documents, and the local jurisdiction's requirements. * Contribute to building a high-performing team by mentoring and supporting the Owner's team within the scope of work's space. * Support the Owner's quality team by consulting the project's team leading effective cross-functional communication. Move Forward with Kleinfelder: Kleinfelder and its' subsidiaries and affiliates, has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 110 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose - together, we deliver. Progress with an Employer that Values You Kleinfelder, and its' subsidiaries and affiliates, is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder, and its' subsidiaries and affiliates, offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder, and its' subsidiaries and affiliates, is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder, and its' subsidiaries and affiliates, does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder, and its' subsidiaries and affiliates, will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder, and its' subsidiaries and affiliates, explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder.

Location: East Liberty, OH Employment Type: 2nd Shift, Full-time, temp-to-hire Job Brief Kable Workforce Solutions is hiring a Quality Inspector for our client. This job involves inspecting parts using measuring and test equipment, sorting and documenting results, and completing production-related and administrative tasks. You'll follow written and verbal instructions, report issues to supervisors, maintain a clean work area, and provide accurate paperwork while meeting productivity and safety standards.What's a Typical Day Like? Use inspection, measuring and test equipment Perform a full range of varied sorting, inspection, production, and data entry Perform a full range of production-related tasks as well as administrative duties related to quality project work Read and follow written and verbal work instructions - all employee policies, work rules, and directions Identify problems and questions and report them to the appropriate supervisor Maintain organization and cleanliness work area Ability to use inspection and test equipment as required Provide accurate and complete information for paperwork Meet productivity standards after successfully completing training Comply with all safety, hazardous material and OSHA training, rules, and reporting, ensuring safe work environment. What Are the Requirements of the Job? 18 years old Previous experience in a distribution center environment helpful Ability to frequently lift cartons above (up to 8 feet overhead) or below shoulder level Ability to move or lift up to 50+ lbs. Walk, stand, and/or sit for an entire shift Ability to utilize hand/eye coordination and manual dexterity Maintain flexibility regarding job assignments including working scheduled hours, location changes (QA Inspectors go to the parts they are inspecting), or mandatory overtime Pass a background check and drug test Wear steel toes Capability to stand for prolonged periods of time Communication skills. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Why Choose Kable Workforce Solutions? Weekly Pay Exclusive Access Opportunities to V.I.P. Vault Day 1 Benefits Various Bonus Opportunities Eligibility for Employee of the Month Rewards How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

Vector's aerospace partner is a major manufacturer in Eastlake, OH. They are in search of an NDT Wax Wall Inspector to join their growing team! 1st Shift 7a-3p $20-$22/hr. ** Direct Hire is a possibility for the well-qualified candidate ** Responsibilities: X-ray wax patterns. Will be a liaison to Engineering regarding wax wall and x-ray wax patterns and cores. Provide feedback to Engineering to prevent wall excursions and core break. Perform x-ray and wax wall on a full-time basis. Keep the work area in a clean, orderly, and safe working condition. Observe all safety requirements and wear proper required PPE at all times Properly identify your work performed in Lot Control and affix required identification. Keep the work area and equipment in a clean, orderly, and safe working condition. Comply with all applicable Standard Operating Procedures. Perform all other duties assigned by supervision. Requirements: Will be required to go through on-site certification training and will be required to maintain certification Must possess good interpersonal and communications skills. Proven track record working in a team environment. Must be able to demonstrate good communication skills. Demonstrate proficiency of applicable procedure instructions. Must be a U.S. Citizen or Permanent Resident (Green Card Holder). #IND100

The Quality Inspector is primarily responsible for inspecting and measuring product, recording the results of their inspections, and communicating results in a timely and accurate manner. The Quality Inspector will also monitor manufacturing processes, verify production records, and assist with maintaining the quality management system in the production cells. This position is on-site, full-time, hourly, Monday through Friday, 3:15 pm to 11:45 pm. Duties/Responsibilities · Interpret blueprints, engineering specifications, and other process documents to obtain product information such as specified material, color, finish, and dimensions. · Perform periodic in-process and final inspections, and SPC control charting as applicable. · Perform effective and efficient operation of all standard inspection equipment, including calipers, micrometers, comparators, measure scopes, height verniers, scales, etc. · Communicate deviations from specifications, irregularities and defects using fact-based findings. · Collaborate with supervision to ensure quality assurance procedures are implemented effectively and adhered to on the manufacturing floor. · Actively promote the Commitment to Quality policy and procedures. · Provide support of quality assurance activities as needed including but not limited to quality training, audits, customer return evaluations, and corrective actions. · Perform various assigned production duties when not engaged with inspection or quality evaluation activities. · Other duties as assigned. Education and Experience · High school diploma or equivalent. · Minimum of 2 years of experience as a Quality Inspector in a manufacturing environment. · Demonstrated experience inspecting extremely small parts and detecting irregularities. · Proficiency in reading and interpreting engineering drawings. · Experience using standard measurement and inspection tools. · Previous experience detecting defects and irregularities on extremely small parts required. · Additional training or certifications in quality inspection, metrology, or related fields preferred. · Experience with quality audits, SPC analysis, and QMS support activities preferred. · Familiarity with Lean or Continuous Improvement practices preferred. Required Knowledge · Principles of quality inspection and measurement in a manufacturing environment. · Engineering drawings, blueprints, and technical documentation. · Statistical Process Control (SPC) methods. · Quality system documentation and reporting requirements. Required Skills · Proficient in the use of inspection tools such as calipers, micrometers, gage pins, GO/NO-GO gages, and vision systems. · Strong attention to detail and accuracy in measurement and recordkeeping. · Excellent written and verbal communication skills. · Strong analytical skills to evaluate data and detect trends. · Effective collaboration with production, engineering, and supervision. Required Abilities · Ability to remain focused during repetitive tasks while maintaining accuracy. · Ability to detect and evaluate defects, including extremely small parts. · Ability to remain calm and professional under pressure. · Ability to multi-task and adjust quickly to changing priorities. · Ability to work independently and as part of a team. · Strong interpersonal skills and ability to interact professionally with team members and supervisors. · Flexibility to support overtime requirements when necessary. · On-site availability if assigned second-shift schedule (Monday-Friday). · Willingness to work overtime as needed to support production and customer requirements. Physical and Work Environment Requirements · Work performed in a manufacturing environment with exposure to production equipment and moderate noise levels. · Regularly required to stand, walk, sit, talk, and hear. · Frequent use of hands to finger, handle, or feel, and to reach with hands and arms. · Occasional bending, stooping, or kneeling. · Regularly required to lift and/or move up to 25 lbs. · Specific vision abilities required include close vision, color vision, depth perception, and ability to adjust focus. · Safety glasses and other PPE must be worn in designated areas. · Requires extended use of a computer for recording inspection data and reporting results. · Frequent communication by phone or in-person with team members and supervisors. · Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position. Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Meritec (a Qnnect Company's) is a well-established, growth-oriented, signal integrity leader and preferred vertically integrated manufacturer of high-performance electrical and electronic interconnect embedded systems and connectors with over fifty-years of innovation, serving world-wide markets with cost-effective solutions. Qnnect and its affiliated companies are affirmative action/equal opportunity employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Do you think you can MAKE THE CUT? Apply today to join our team! Kett Tool Company has a long standing history in the production and manufacturing of specialty power tools in Cincinnati, Ohio since 1940. From our product line of shears, saws, and nibblers, we provide quality and power to contractors, builders, and manufacturers across a multitude of industries. With over 70 years of experience, we make tools that you will find nowhere else. Our Mission Our people and our customers are our priority. Through innovation, service, and a focus on quality we strive to deliver the best product and experience. Culture We promote an employee-first culture where you are appreciated, valued, and empowered to work together to promote our corporate mission. The Kett Tool brand and our team stand for integrity, accountability, and impact. We Want You Are you ready to make an impact? If you challenge yourself to grow and learn every day, we want you. Do you want your ideas to promote innovation? If you are excited about improving processes and thinking outside of the box, we want you. Are you a team player? If you work well with others and enjoy a collaborative workplace and culture, we want you. Do you say what you mean and mean what you say? If you conduct yourself with honesty, integrity, and accountability, we want you. Benefits/Offerings All full time employees are eligible for our benefits program. Benefit offerings include: Medical Vision Dental 401K Paid Medical Leave Policies Education Assistance Program Company Sponsored Short Term Disability, Long Term Disability, and Life AD&D coverage Personal and Vacation Time Job Title: Quality Inspector I Department: Quality Reports to: Quality Engineer FLSA Status: Non- Exempt Purpose The purpose of the Quality Inspector is to perform inspections on incoming, in-process, and final materials/components to verify that such meet required quality specifications. Primary responsibilities Inspect and measure incoming materials/components using established quality standards and documentation for each part Inspect and measure start-up and in-process components using established quality standards and documentation for each Inspect and measure final components and products using established quality standards and documentation for each part Read engineering drawings and instructions to comprehend the quality expectations for the product and supplies Approve or reject parts based on quality requirements Assist Quality Engineer in performing First Article inspections as needed Assist Quality Engineer and other management personnel in identifying in-process or supplier trends Assist Quality Engineer and other engineering/management personnel in identifying opportunities for improving processes and procedures related to quality and material flow Responsible for maintaining a safe work environment Competencies and Skills Ability to learn, understand, and effectively apply sampling plans Excellent attention to detail with a quality mindset Self-motivated and able to work with minimal supervision Ability to work in a team environment Willingness to take further technical training in areas required to improve job skills when necessary Ability to use a computer or tablet to process transactions Ability to read and interpret mechanical drawings, industry specifications and work instructions Basic knowledge of measuring instruments such as calipers, micrometers, bore micrometers, height gauges, etc. Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the primary responsibilities of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is mostly in a sitting position but will occasionally be required to walk and lift up to 50 lbs. Occasionally required to climb, balance, stoop, kneel, crouch, and walk. Occasionally move up to 100 pounds using a pallet jack. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision and ability to adjust focus. While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions, fume or airborne particles. The employee is frequently exposed to moving mechanical parts. The noise in the work environment is moderate to loud. The primary responsibilities of this job involve working in a warehouse facility with exposure to both heat and cold. Other Duties This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Kett Tool Company, a division of Endurance Industries, is an equal opportunity employer: qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex, national origin, citizenship status, disability status, protected veteran status, age, marital status, sexual orientation, gender identity, genetic information, or any other characteristic protected by law. If a qualified individual with a disability or disabled veteran needs a reasonable accommodation to use or access our online system, that individual should please contact us at ************

Job Description INSPECTION/FEED ASSOCIATE JOB TYPE AND CLASSIFICATION: Full Time Hourly Non-Exempt MAC.BID buys truckloads of customer returns and overstock products then sells these items individually to the public through online auctions. The inspection/feed associate prepares and positions the product for the Scan Team. This position reports to the Scan or Big Box Scan Team Lead. MAJOR DUTIES AND RESPONSIBILITIES: Inspect inbound products for obvious defects Categorize each product as Like New, Open Box, or Damaged Test electronics at a basic level to assess general condition Move products to the conveyor for the scanners to process Perform other tasks as assigned by management QUALIFICATIONS: Must be available to work onsite Monday - Friday for 8 hours with a half-hour lunch break, hours to be determined by workload and General Manager Must be able to lift 25 pounds alone, 50 pounds with a team lift Must be able to stand and walk for hours at a time Must be tech savvy Must be able to follow written directions and company policies Must have a High School Diploma or equivalent BENEFITS: Healthcare after 60 days of employment Weekly paychecks Employee credit each week to bid on our items after 60 days of employment 401(k) with employer match after 90 days of employment Employee Referral Program 5 days PTO after 90 days of employment MAC.BID is an equal-opportunity workplace. We will consider all qualified applicants for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other basis protected by applicable law. Mon-Fri 8:30am-5pm

Supplier Inspection Services, Inc. (SIS, Inc.) is hiring full-time Manufacturing Quality Inspectors at $15.00 per hour in the Dayton, OH and surrounding areas. Supplier Inspection Services, Inc. provides quality management support services that assist our clients manufacture and deliver high quality products. Our clients include component manufacturers in the Automotive, Aerospace, Appliance and general manufacturing industries. Our Manufacturing Quality Inspectors perform visual inspection and rework of manufactured parts. Manufacturing Quality Inspectors starting pay @ $15.00/hour with room for advancement. Manufacturing Quality Inspectors job duties include but are not limited to:• Performing a range of varied inspection tasks • Using inspection, measuring and test equipment as necessary• Perform visual inspection either at one of our local facilities or where the parts are manufactured or stored• Reading and following written and verbal work instructions• May work overtime and/or weekends as assigned Qualifications• HS diploma or GED equivalency• Steel toe shoes• Basic math skills• Detailed oriented • Follow verbal and written instructions• Provide accurate and complete information for required paperwork• Must have own vehicle and a valid driver's license • Must be able to walk, stand, lift up and move material and perform repetitive tasks for an entire shift What You'll Love About Working With Us• Variety of work in various manufacturing plants and industries• Medical, Dental, Vision and Short-Term Disability, upon eligibility• Paid weekly• Six (6) paid Holidays, upon eligibility• Forty (40) hours of paid vacation, upon eligibility• Retirement Program, upon eligibility• Birthday, Work Anniversary and Employee of the Month recognition program• Advancement opportunities *Part-time applicants must be willing to work a full-shift (at least 8 hours) per shift.

Job Description Ohio Valley Manufacturing is a supplier to manufacturers of automobiles, trucks, recreational vehicles, agricultural equipment, lawn & garden products, and suspension parts. At Ohio Valley, it's our people who make the critical difference. We consider ourselves fortunate to have people who have worked in the industry 40+ years. Our staff is comprised of people who possess the highest levels of industry expertise, and who work hard to pass on this expertise to other employees. Ohio Valley Manufacturing offers a competitive wage program and a great benefits package including paid holidays, vacation time, health, vision, dental, and life insurance. We also offer a generous 401K plan. To learn more about us, visit our website at: ********************* Currently, we have an immediate full-time opening for the following position: Quality Inspector, 3rd shift 10:00 pm - 6:00 am Monday - Friday. Overtime on Saturday and Sunday may be required. Training will take place on 1st shift for the first several weeks of employment. Essential Job Functions: Performs inspections as required and accurately records results on the appropriate forms. Job Requirements: Must be able to pass a drug screen initially and thereafter if selected for a random drug screen Must be at least 18 years of age or older High school diploma or equivalent preferred Must be able to communicate effectively Must be able to lift up to 70 lbs. Previous Quality Inspector experience *required *in a similar facility. Must be able to work overtime Report to work each day, on time, as scheduled. Benefits: Health Insurance Vision Insurance Dental Insurance Life Insurance 401(K) Paid Time Off Ohio Valley Manufacturing, Inc. is an Equal Opportunity Employer and a Drug-Free Workplace Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance

Employment Type: Full-Time | Direct Hire Schedule: 1st Shift | Monday-Friday | 6:00 AM - 2:30 PM Compensation: $26-$30/hour (higher for exceptional experience) About the Opportunity A leading manufacturer supporting defense and industrial markets is seeking a Certified Welding Inspector (CWI) to oversee weld quality, compliance, and inspection processes at its Cincinnati operation. This role is ideal for an experienced CWI who wants to stay hands-on, influence quality standards, and work closely with production and engineering teams. What Youll Do Perform internal and external weld inspections on work-in-progress and completed weldments Inspect to AWS codes, drawings, specifications, and contract requirements Interpret weld symbols, acceptance criteria, and configuration revisions Approve or reject weldments and document findings Recommend and approve weld repairs Maintain welder qualifications, WPS records, and inspection documentation Assist with welder training and certification Stop production when welds do not meet code or specification requirements Support audits, corrective actions, and continuous quality improvement initiatives What Youll Need Active AWS Certified Welding Inspector (CWI) certification (required) Minimum 5+ years of welding inspection and manufacturing experience Strong knowledge of AWS welding codes and inspection standards Ability to read and interpret drawings, WPS, and technical documentation Proficiency with Microsoft Office and inspection reporting tools Willingness to work overtime as required Must pass drug screen and background check Preferred AWS Endorsements AWS D1.1 - Structural Steel AWS D1.2 - Structural Aluminum AWS D1.3 - Sheet Steel AWS D1.6 - Stainless Steel Why This Role Stands Out First-shift schedule with consistent hours Strong hourly compensation with flexibility for top talent High-impact quality leadership role Stable manufacturing environment with long-term demand Full benefits package including health coverage and 401(k)

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: Quality Inspector reports to the Quality Manager and ensures parts and processes meet the requirements of operation work instructions, customer requirements including the drawing. The schedule for this position is 1st shift, Monday - Friday 7:30 am - 4:00 pm Essential Responsibilities: Inspects and approves incoming materials/parts by confirming to work instructions, drawings, specifications, conducting visual and measurement tests, and rejecting unacceptable materials/ parts Inspects in-process & final production parts by confirming to work instructions, specifications, conducting visual and measurement tests, recording non-conforming parts in the appropriate database Maintain records of testing and information such as number of defective products, dimensional results, etc. in accordance with the Quality procedures Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs Ability to complete DSQR training and earn DSQR certification to meet customer requirements Use inspection equipment & automated systems to perform part inspections Accomplish [Verify] first piece at the operation which approves the parts to be processed Conveys verbally and/or in writing, the condition of the parts being inspected Utilize electronic databases for submitting non conformances or obtaining work instructions Performs administrative duties consistent with departmental practices Follows all safety policies and procedures Other duties as assigned Qualifications High School diploma or GED with excellent working knowledge of trigonometry. Minimum two years of experience in manufacturing including operational inspection or supporting quality inspection utilizing hand held gages. Knowledge and ability to apply GD&T DSQR/DPRV experience preferred Ability to read blueprints and instructions to comprehend the quality expectations for parts or materials Basic computer skills including data entry Reads and interprets customer and industry specifications. Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Launch Your Career with ConGlobal ConGlobal is hiring immediately for a key role in our global supply chain operations. Whether you're looking to grow your career or gain new skills, this role offers paid training, competitive pay, excellent benefits, and long-term advancement opportunities. 📍 Location: 2101 Hill Avenue Toledo, Ohio 43607 United States 💲 Starting Pay: $16.56/hour 🕐 Status: Full-Time | Immediate Hire 🕔 Schedule: Open availability required, 4 days a week night shift 6:00PM-4:00AM, weekends, and holidays. 🚗 IMPORTANT: A VALID DRIVER'S LICENSE IS REQUIRED FOR THIS POSITION 🚗 Applications without a valid driver's license will not be considered. Responsibilities As a Gate Inspector, you'll be the first line of defense in maintaining safety and efficiency at our intermodal facility. You'll be responsible for inspecting all inbound and outbound units using a computer system and/or handheld device, ensuring only authorized equipment and personnel enter or exit the premises. Your role is critical in supporting on-site logistics and keeping ConGlobal's operations running smoothly and securely. Key Responsibilities: Conduct inspections on inbound and outbound intermodal units. Utilize handheld devices and/or computer systems to log inspection data. Control facility access for vehicles and personnel, ensuring compliance with security protocols. Communicate with drivers, team members, and terminal personnel to coordinate safe and efficient movement. Support daily yard operations by helping maintain orderly flow and accurate equipment tracking. Identify and report any damages, hazards, or safety concerns. Qualifications Basic computer skills and the ability to use handheld devices. Strong attention to detail and commitment to safety. Good communication and customer service skills. Ability to work outdoors in all weather conditions and perform physical tasks (standing, walking, lifting, etc.). Open availability required, 4 days a week night shift 6:00PM-4:00AM, weekends, and holidays. Valid driver's license Must pass a pre-employment background verification, physical and drug screening. The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen. We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position is responsible for inspecting tacked, welded, painted, galvanized and manufactured parts and components for quality per the Company's quality control processes and procedures. Essential Duties: * Communicates clearly and concisely via email, text, or verbally * Ensures all inspections comply with Sabre's quality standards * Conducts in process and final visual weld and dimensional inspections in accordance with AWS D1.1 * Verifies and maintains inspection and test status of product during all stages of manufacturing * Verifies rework and repair of nonconforming products * Initiates requests for corrective action on observed conditions which do not conform to quality system requirements * Prepares, reviews and maintains Quality records appropriate to inspection and test activities to assure legibility, completeness, and correctness of the information * Visually inspects manufactured parts to ensure they are manufactured per the drawings/specifications * Ensures that customer requirements are determined and met or exceeded * Contributes to a safe working environment by being responsible for quality, safety, organization, and cleanliness in area of operation * Contributes to team effort by communicating and working well with others, as well as accomplishing related tasks as needed * Maintains a professional demeanor at all times * Additional duties as assigned Position Requirements: * High school diploma or equivalent. Two-year Associate/Technical degree preferred. Must be able to meet the AWS D1.1 requirements of a visual weld inspector. * Recent experience working with Quality Control in a welding/manufacturing environment preferred * Effectively read and interpret blueprints and weld symbols * Must possess strong English verbal and written communication skills * Must be detail oriented and have the ability to multi-task in a fast paced, team environment * Must possess the ability to read and interpret documents such as safety and quality manuals, blueprints, and design drawings * Ability to efficiently input and retrieve information from PC based information systems * Ability to effectively use measuring devices such as a tape measure, combination squares, levels, etc. to accurately verify all parts to print * Regular and timely attendance is required Physical Requirements: * Must be able to perform work functions while standing for long periods of time. * Must be able to lift, push pry and drag heavy materials up to 50 lbs. * Must be able to reach, grasp, bend, stoop, crawl under or climb over to inspect product * Must be able to pass the Jaeger 2 test and distinguish between red and yellow * Must be able to work in both indoor and outdoor environments, and in all types of weather conditions such as rain, snow, heat, and cold At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity

Extruder Inspector (Afternoon Shift 3p-11pm) Summary/Objective This position ensures the set up and quality of products through thorough assessment and analyses using specific procedural standards. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs inspections of company products to determine conformance with specifications. Utilizes standard mechanical and electrical instruments, functional gauges and measuring devices. Processes associated documentation, including process tags, rework tags and nonconforming material documents. Work under direct supervision and in accordance with instructions and techniques. Required Education and Experience HS Diploma or GED Math and Computer Skills Hand Tools and Measuring Devices (micrometer, tape measure) Forklift Experience Demonstration good communication skills Competencies Reliability Attention to detail Teamwork Work Environment While performing the duties of this job in a manufacturing setting, the employee is frequently exposed to heat and moving mechanical parts. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must stand 8-12 hours per day and is occasionally required to bend, squat, climb, reach, stoop, kneel, crouch or crawl. The employee must occasionally lift, push, pull or move up to 50 pounds. Position Type/Expected Hours of Work This is a full-time position, Monday through Friday, 8-hour shift. Additional hours during the week or on weekends may be required according to production demands. Supervisory Responsibility This position requires no supervisory responsibility. Travel No travel is expected for this position. AAP/EEO Statement SIMONA Boltaron is an Equal Opportunity Employer Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Pay $16.00 base rate plus $1.00 shift differential

Quality Electrodynamics (QED), located in Mayfield Village, OH, is a global developer, manufacturer and supplier of advanced medical equipment electronics. Current products include cutting edge MRI radiofrequency (RF) antennas/coils for diagnostic imaging at the full range of magnetic field strengths. Most of these are FDA Class II noninvasive devices used for obtaining diagnostic images for various human anatomies. JOB SUMMARY The Product Quality (PQ) Inspector will perform inspections, checks, tests and sampling procedures for incoming materials, parts and components. Perform in-process and final inspections for partially assembled and/or finished medical devices. Write product non-conformances. Review quality records for completeness and accuracy. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform inspections of purchased parts, subassemblies, in-process product and finished products according to defined criteria using standard physical, mechanical and/ or electrical measurements Accurately and clearly document the results of inspections including quantitative measurements and observations Draft or revise inspection documents based on feedback from management and observations of best practices Work with Operations and Quality Management to drive continuous improvement of inspection methods and processes and meet departmental objectives Perform review of device history records (DHRs) and other documentation for compliance to established procedures and good documentation practices (GDP) Write non-conformance reports. Ensure non-conformances are closed in a timely manner Participate in quality audits of the quality management system Other tasks as may be assigned by management QUALIFICATIONS: Education and Experience Required High school diploma or GED; or equivalent combination of education and experience Minimum of one year experience performing electrical or mechanical QC/QA inspections Preferred Associate's degree in a technical discipline PCBA inspection experience and/or IPC 610 certification Experience with ISO and FDA audits Experience with QC/QA medical device inspection or test, especially MRI Skills and Abilities Required Meticulous attention to detail - absolute must Must be self-directed, self-motivated and able to work in a fast-paced team environment A genuine belief in continuous improvement and disciplined processes Self-starter with ability to multi-task and prioritize work day/projects independently Excellent interpersonal and communication skills Computer skills including working with word documents, spreadsheets, email and PLM/ERP business applications Ability to follow good documentation practices (GDP)s Preferred Understand and interpret mechanical drawings and electrical schematics Working knowledge of printed circuit board (PCB) inspection standards (IPC-A-600) Technical writing skills Root cause investigation skills and an understanding of various investigative methods (5 Whys, Fault Tree, etc.) Risk evaluation skills (PFMEA, Fault Tree) and rework adverse effect assessment Physical Requirements Be able to lift 25 lbs. 1st shift 7:00am to 3:30pm Full Time

RESPONSIBILITIES: X-ray wax patterns. Will be a liaison to Engineering regarding wax wall and x-ray wax patterns and cores. Provide feedback to Engineering to prevent wall excursions and core break. Perform x-ray and wax wall on a full-time basis. Keep the work area in a clean, orderly, and safe working condition. Observe all safety requirements and wear proper required PPE at all times Properly identify your work performed in Lot Control and affix required identification. Keep the work area and equipment in a clean, orderly, and safe working condition. Comply with all applicable Standard Operating Procedures. Perform all other duties assigned by supervision. QUALIFICATIONS: Will be required to go through on-site certification training and will be required to maintain certification Must possess good interpersonal and communications skills. Proven track record working in a team environment. Must be able to demonstrate good communication skills. Demonstrate proficiency of applicable procedure instructions. REQUIREMENTS: Meet or exceed defined Visual Acuity (when required). Meet color perception standards needed in performance of job requirements (when required). Additional training to comply with applicable SOP/Certifications (when required).