Weld Inspector Resume Examples 2023

Research Summary. We analyzed 783 weld inspector resumes to determine which ones land the most jobs. Below you'll find examples of resumes that can help you get an interview (and a job offer) from companies like Tulsa Inspection Resources and Kinder Morgan. Here are the key facts about weld inspector resumes to help you get the job:

  • The average weld inspector resume is 411 words long
  • The average weld inspector resume is 0.9 pages long based on 450 words per page.
  • Pipeline project is the most common skill found on a weld inspector resume. It appears on 8.7% of resumes.
After learning about how to write a professional weld inspector resume, you can make sure your resume checks all the boxes with our resume builder.

Resume

Weld Inspector Resume Example

 
Victoria Hart
Weld Inspector
Contact Information
Fort Collins, CO
(250) 555-7473
Skills
  • Pipeline Project
  • Drill Pipe
  • Drill Collars
  • Test Results
  • Engineering Drawings
  • MIG
  • Nace Level
  • Sspc
  • Radius
  • Quality Standards
Employment History
Weld Inspector
2020 - Present
USDA
Fort Collins, CO
  • Set up and operated production equipment in accordance with current manufacturing practices and standard operating procedures.
  • Document all welding done throughout the projects and apply them to the as-built drawings.
Weld Inspector
2018 - 2020
Kelly Services
Louisville, KY
  • Packed product after final inspection.
  • Perform Pre-Cleaning mechanical integrity inspections before any surface prepping is performed.
  • Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment.
Pipe Inspector
2009 - 2018
Kelly Services
Louisville, KY
  • Conducted all operations activities according to Baxter internal and FDA requirements.
  • Perform internal audits of products, processes and work areas ensuring all are in compliance with quality standards and industry regulations.
  • Packed product after final inspection.
  • Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment.
  • Inspected, tested, and sorted drill pipe for defects, wear, and deviations from specification.
Education
High School Diploma
2009 - 2009
 
 
Eric Harris
Weld Inspector
Contact Info
Indianapolis, IN
(630) 555-5876
Skills
Magnetic ParticleCommunicationSafety MeetingsAssembly LineQuality StandardsGDFinal InspectionAPIInspection ReportsSafety Guidelines
Employment History
Weld Inspector
2019 - Present
Stratosphere Quality
Indianapolis, IN
  • Increased quality of parts from 100% defective to 90% usable parts by applying need repairs to defective parts.
  • Utilized DA Forms 2404, 2405 and 2407 to record inspection results and list required repair parts by nomenclature and NSN.
  • Utilize MRB, Material Disposition, and other procedures as required.
  • Verified fabrication and erection of structural steel per codes
Weld Inspector
2018 - 2019
RMI
Indianapolis, IN
  • Managed and documented all area Contractor NDE and Inspection.
  • Performed penetrant testing and scheduled other NDE as required.
  • Ensured proper procedures were followed and maintained in docking area.
  • Monitored and inspected the repairs of tanks required to ensure compliance with API 653.
Inspector
2016 - 2018
Product Action
Indianapolis, IN
  • Inspect car parts for GM, Chrysler, Lear, Toyota.
  • Inspected parts for Honda-Map, ELP, HTM, assembly line, warehouse, fast paste, lift 50lbs
  • Worked in assembly teams for quality evaluation of automotive parts using calipers and multiple tools.
Education
High School Diploma
2016 - 2016
 
 
Victoria Hart
Weld Inspector
Fort Collins, CO
vhart@example.com
(250) 555-7473
Experience
Weld Inspector
2020 - Present
USDAFort Collins, CO
  • Set up and operated production equipment in accordance with current manufacturing practices and standard operating procedures.
  • Document all welding done throughout the projects and apply them to the as-built drawings.
Weld Inspector
2018 - 2020
Kelly ServicesLouisville, KY
  • Packed product after final inspection.
  • Perform Pre-Cleaning mechanical integrity inspections before any surface prepping is performed.
  • Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment.
Pipe Inspector
2009 - 2018
Kelly ServicesLouisville, KY
  • Conducted all operations activities according to Baxter internal and FDA requirements.
  • Perform internal audits of products, processes and work areas ensuring all are in compliance with quality standards and industry regulations.
  • Packed product after final inspection.
  • Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment.
  • Inspected, tested, and sorted drill pipe for defects, wear, and deviations from specification.
Skills
Pipeline Project
Drill Pipe
Drill Collars
Test Results
Engineering Drawings
MIG
Nace Level
Sspc
Radius
Quality Standards
Education
High School Diploma
2009 - 2009
 
Create My Resume
Build a professional resume in minutes.

How your resume should look:

  • The job title on your resume should match your application for the role.
  • Ensure your work experience focuses on achievements, rather than responsibilities.
  • Recruiters and hiring managers suggest fitting your resume on one page.

Choose From 10+ Customizable Weld Inspector Resume templates

Zippia allows you to choose from different easy-to-use Weld Inspector templates, and provides you with expert advice. Using the templates, you can rest assured that the structure and format of your Weld Inspector resume is top notch. Choose a template with the colors, fonts & text sizes that are appropriate for your industry.

Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume
Weld Inspector Resume

Weld Inspector Resume Format And Sections

1

1. Add Contact Information To Your Weld Inspector Resume

Your name should be the biggest text on the page and be at or near the top of the document.

Your address doesn't need to include your street name or house number - listing your city and state works just fine.

Your email address should be professional, but not your current work email address. It's not a good look to use your work email for personal projects (job-searching).

Your social media can be included if you have a fully-fledged LinkedIn page or another social media page that showcases your relevant skill set.

Weld Inspector Resume Contact Information Example #1

Hank Rutherford Hill

St. Arlen, Texas | 333-111-2222 | hank.hill@gmail.com

Do you want to know more?
How To Write The Perfect Resume Header
2

2. Add Your Relevant Education To The Resume

Your resume's education section should include:

  • The name of your school
  • The date you graduated (Month, Year or Year are both appropriate)
  • The name of your degree
If you graduated more than 15 years ago, you should consider dropping your graduation date to avoid age discrimination.

Optional subsections for your education section include:

  • Academic awards (Dean's List, Latin honors, etc. )
  • GPA (if you're a recent graduate and your GPA was 3.5+)
  • Extra certifications
  • Academic projects (thesis, dissertation, etc.)

Other tips to consider when writing your education section include:

  • If you're a recent graduate, you might opt to place your education section above your experience section
  • The more work experience you get, the shorter your education section should be
  • List your education in reverse chronological order, with your most recent and high-ranking degrees first
  • If you haven't graduated yet, you can include "Expected graduation date" to the entry for that school
Check More About Weld Inspector Education
Majors
Precision Metal Working
28.4%
Business
14.0%
General Studies
7.4%
Education
6.0%
Show More

Weld Inspector Resume Relevant Education Example #1

High School Diploma 2009 - 2011

Weld Inspector Resume Relevant Education Example #2

High School Diploma 2005 - 2007

3

3. Next, Create A Weld Inspector Skills Section On Your Resume

Your resume's skills section should include the most important keywords from the job description, as long as you actually have those skills. If you haven't started your job search yet, you can look over resumes to get an idea of what skills are the most important.

Here are some tips to keep in mind when writing your resume's skills section:

  • Include 6-12 skills, in bullet point form
  • List mostly hard skills; soft skills are hard to test
  • Emphasize the skills that are most important for the job
Hard skills are generally more important to hiring managers because they relate to on-the-job knowledge and specific experience with a certain technology or process.

Soft skills are also valuable, as they're highly transferable and make you a great person to work alongside, but they're impossible to prove on a resume.

Example Of Weld Inspector Skills For Resume

  • NDT Skills

    Non-Destructive Testing, NDT, is a combination of different test techniques used individually or collectively to evaluate the integrity and properties of a material, component, system, or structure without permanently altering it. NDT is important for safe operation, as well as for quality control and lifetime evaluation of the system. It is used in industries such as aerospace, oil, and gas, nuclear, power generation, medical, rail, general manufacturing, etc.

  • NDE Skills

    Nondestructive evaluation (NDE) is a term used in describing quantitative measurements and locating a defect. It helps identify material properties like formability and fracture toughness. Majority of people know the technology used in NDE from the medical industries such as x-ray and ultrasound.

  • PT Skills

    PT which stands for Prothrombin Time is a test to evaluate the body's ability to properly form blood clots using one's blood sample. PT results are used to calculate the International Normalized Ratio (INR) which detects the effectiveness of blood-thinning medications like Warfarin taken by patients that have blood-clotting disorders.

  • Magnetic Particle Skills

    Magnetic Particle testing, also known as Magnetic Particle Inspection, is a method or examination used to determine the flaws of the surface and subsurface materials like nickel, iron, cobalt, and alloy.

  • Quality Standards Skills

    Quality standards are a specific level of standards of products that are set by the companies for the customers that have to be met and maintained throughout the process until the time of delivery. Quality standards are information that includes the customer's requirements, guidelines, and characteristics for the needed final product or service.

  • Structural Steel Skills

    Structural steel is a type of steel material commonly developed or utilized to perform duties such as making tools to construct many structures and buildings. It usually forms in a different size, shapes, properties, and compositions for various industrial and manufacturing companies. These are often used in constructing buildings, aircraft, bridges and pipelines.

  • Inspection Reports Skills

    An inspection report is a written document provided after a thorough evaluation of a specific procedure/ process.

Top Skills for a Weld Inspector

Source: Zippia.com
  • Pipeline Project, 8.7%
  • NDT, 8.0%
  • NDE, 7.1%
  • Inspect Welds, 6.9%
  • Other Skills, 69.3%
Not sure which skills are really important?
3 Big Tips For Listing Skills On Your Resume
4

4. List Your Weld Inspector Experience

The most important part of any resume is the experience section. Recruiters and hiring managers expect to see your experience listed in reverse chronological order, meaning that you should begin with your most recent experience and then work backwards.

Don't just list your job duties below each job entry. Instead, make sure most of your bullet points discuss impressive achievements from your past positions. Whenever you can, use numbers to contextualize your accomplishments for the hiring manager reading your resume.

It's okay if you can't include exact percentages or dollar figures. There's a big difference even between saying "Managed a team of engineers" and "Managed a team of 6 engineers over a 9-month project."

Most importantly, make sure that the experience you include is relevant to the job you're applying for. Use the job description to ensure that each bullet point on your resume is appropriate and helpful.

Don't have any experience?
How To Show Your Experience On a Resume... Even When You Don't Have Any
Work History Example # 1
Weld Inspector
Cleveland Integrity Services
  • Assured the correct percentage of root pass was completed before fit up clamps were removed according to Consumers Energy Procedures.
  • Certified welders according to Consumers Energy Procedures.
  • Inspected HDD, bores, hydrostatic testing.
  • Maintained tight quality control of individual area and sustained coworker communication.
  • Monitored installation and placement of fiber optics, also testing of materials used in the process.
Work History Example # 2
Inspector
Jabil
  • Reviewed communication of quality data with team members and supervisor regarding current and previous product builds.
  • Performed daily Inspections of Second Ops and Final QA, to ICP 610-E Standards.
  • Followed blueprints and Good Documentation Practices (GDP); earned inspectors stamp.
  • Verified quality control inspection reports with ISO's, weld maps, and support drawings.
  • Served as facilitator/informational source for QA group during implementation/integration of SAP/R3.
Work History Example # 3
Fabric Inspector
Bedrosians Tile & Stone
  • Programmed Coordinate Measuring Machine (CMM) for aircraft product scans using PC-DMIS software.
  • Assisted in implementation of operations, maintenance and capital programs.
  • Used CMM, calipers, micrometers, protractors, lab equipment, and a variety of Quality Testing equipment.
  • Co-directed implementation of SPC program at facility across all processing lines.
  • Created Product Assembly Instructions Blue Print Reading, Quality Control, Micrometers, Calipers
Work History Example # 4
Weld Inspector
Valvoline
  • Completed over 200 projects for theWilliams Frac and Storage facilitys in the Conway Area.
  • Reviewed mill certificates and performed material receiving inspection.
  • Maintained standards, safety, and supervision of hot tie-ins.
  • Inspected and analyzed curriculum for over twenty communications operations and maintenance courses.
  • Received two promotions in an 8 month period, went from a Level I inspector to a Level III inspector.
5

5. Highlight Your Weld Inspector Certifications On Resume

Certifications can be a powerful tool to show employers that you know your stuff. If you have any of these certifications, make sure to put them on your weld inspector resume:

  1. Certified Welding Inspector (CWI)
  2. OSHA Safety Certificate
  3. Certified Welding Engineer
  4. Certified Welder
  5. Aboveground Storage Tanks Inspector Certification (API)
  6. NDT-Radiographic Film Interpretation of Pipeline Welds (NDT)
  7. Certified Associate Welding Inspector (CAWI)
  8. Welding Inspection and Metallurgy Professional (API)
  9. Certified Welding Fabricator (CWF)

More Certifications For Weld Inspector
6

6. Finally, Add a Weld Inspector Resume Summary Or Objective Statement

A resume summary statement is a 1-3 sentence spiel at the top of your resume that quickly summarizes who you are and what you have to offer. In this section, include your job title, years of experience (if it's 3+), and an impressive accomplishment, if you have space for it.

Remember to address skills and experiences that are emphasized in the job description.

Are you a recent grad?
Read our guide on how to write a resume summary statement

And If You’re Looking for a Job, Here Are the Five Top Employers Hiring Now:

  1. Enbridge Jobs (27)
  2. Fluor Corporation Jobs (10)
  3. Sunoco Jobs (10)
  4. Bechtel Corporation Jobs (9)
  5. NOV Jobs (10)

Common Weld Inspector Resume Skills

  • Pipeline Project
  • NDT
  • NDE
  • Inspect Welds
  • PT
  • Tie-Ins
  • CWI
  • Api-1104
  • Magnetic Particle
  • Destructive Testing
  • Quality Standards
  • Structural Steel
  • Inspection Reports
  • Liquid Penetrant
  • MIG
  • SMAW
  • Backfill
  • Ultrasonic Inspection
  • GMAW
  • Fabrication Shop
  • Stainless Steel
  • RT
  • As-Built
  • GTAW
  • WPS
  • Refinery
  • Visual Inspections
  • FCAW
  • Heat Numbers
  • HDD
  • IX
  • Pressure Vessels
  • Isometric Drawings
  • Hydrostatic Testing
  • Dye Penetrant
  • ITP
  • Brazing
  • Arc Welding
  • PQR
  • Project Specifications
  • Etching
  • Carbon Steel
  • Ultrasonic Testing
  • PMI
  • OQ
  • Client Specifications
  • CNC
  • BP
  • Taps

Weld Inspector Jobs

Links To Help Optimize Weld Inspector Resumes

Weld Inspector Related Resumes

Weld Inspector Related Careers

Weld Inspector Related Jobs

What Similar Roles Do

Updated May 19, 2023