Welder-assembler jobs near me

REPORTS TO: Production Supervision SUPERVISES: N/A AUTHORITIES / RESPONSIBILITIES: • Technically proficient in tasks, work processes, and equipment operation. • Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. • Creates a working environment compliant with quality, safety, environmental, and health regulations and policies. • Rigs plates and equipment safely. • Understand directions and follow instructions. • Maintains cleanliness and organization on assigned job sites. • Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. • Performs safe and effective use of craft related tools and equipment, including but not limited to: millers, sanders, grinders, burr motors, band saws, skill saws, saws all, come along and chain falls etc. • Obtain GMAW ABS ‘B' Class Weld Certification for aluminum applications. • Performs basic layout of plates, materials and weldments using basic engineering sketches, drawings, and diagrams with minimal supervision. • Performs shipfitting functions such as but not limited to fit up of structure, cutting, sniping, sanding, grinding, prepping, tacking and the fit up of plates with minimum supervision. • Performs fitting operations with limited supervision using standard shipfitting Equipment to accomplish fabrication and ship repair duties. • Monitors working environment for compliance with quality, safety, environmental and health regulations. • Must be willing to work with and train lower-skilled workers. • May be assigned to work any shift. • May be assigned additional tasks including outside the craft as required. • Performs and executes work in compliance with NAVSEA STD Items • Must be able to travel to off-site work locations • Must follow Austal Off-Site Temporary Assignment Policy (SUP270) • Must comply with the Company's “Equal Opportunity and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be professional and free of bias, prejudice, and harassment. QUALIFICATIONS / KNOWLEDGE / EXPERIENCE: • Minimum 1 year as a B-Class Fitter at Austal or 2 years in a related industry required. • Pass approved A-Class Fitter Test • Must demonstrate an acceptable proficiency and competency to Austal Supervision for an A-Class Fitters position. • Must demonstrate ability to interpret and work from construction drawings, job specifications, instruction manuals, manufacturer's handbooks, change order, and contract specifications. • Thorough knowledge of equipment, work processes and techniques used in measuring, and fitting of aluminum components, modules and vessels. • Ability to add, subtract, multiply, divide, and measure using the metric system. • Knowledge of shipyard terminology such as general ship structure and vessel layout. • Knowledge of edge preparation and weld joint details. • Advanced working knowledge of engineering drawings and sketches. TOOLS: As directed by Supervisor DIRECTION EXERCISED: N/A DISCRETION EXERCISED: N/A LIASES WITH: • Supervisors • PDSS Leadership • Production Manager • Safety personnel ADDITIONAL GUIDELINES: • Candidates must meet the following employment eligibility guidelines to be eligible for employment with Austal USA: o 18 years of age or older at time of application. o Able to provide proof of US Person Status o Willing to submit to a drug screen o Willing to submit to a background check o No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date o No felony convictions of Drug crimes within three years from disposition date o The ability to obtain and maintain a DBIDS and or any other clearance or access that may be required if deemed necessary in the scope of your position responsibilities PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include the following: 1. Must have the ability to bend, squat, stoop, crawl, and kneel. 2. Perform prolonged standing. 3. Ability to turn head from side to side and about the vertical axis. 4. Ability to turn body at the waist from side to side and about the vertical axis. 5. Lift/push/pull 50lbs to 75lbs on an occasional basis. 6. Lift/push/pull up to 20lbs on a frequent basis. 7. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). 8. Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts. 9. Able to work at a variety of levels (ex. waist, eye, overhead). 10. Demonstrate the ability to safely and appropriately use required tools and equipment. 11. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. 12. Possess sufficient handgrip and coordination to carry and operate tools and equipment. 13. Ability to utilize personal protective equipment (hard hat, safety glasses, steeltoes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. 14. Ability to withstand cold and hot temperatures. 15. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time. 16. Able to respond to verbal and audible sounds/commands. 17. Able to utilize adequate visual skills. 18. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 19. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. COMPENSATION: Salary range depends on relevant experience. $ 39.67 / Hourly Equal Employment Commitment Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: ************. Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

We are currently searching for a Fabricator for our Springfield MO Facility. Co-workers in this classification have a basic understanding and competency in stainless steel welding and grinding operations. Essential Job Functions * Operates mobile crane equipment with the capacity of less than 20,000 lbs. and directs the rigging and hoisting of equipment * Set up and operate machines to make production parts to standard shop blueprints * Perform ordinary manual welding, grinding and cutting operations in all positions * Grind where grade and type of abrasives must be determined by others * Quarter heads and shells for fit-up and determine degrees and location of fittings and nozzles * Paint where finish or compliance to specifications are critical * Operate spray foam insulating and sandblast equipment * Perform tinning and complex soldering operations * Operate spot and seam resistance welding equipment * Set up and operate machines that require minimal skills and experience, such as presses, shears, saws, punches, etc. * Assemble motor controls and perform three-phase wiring requiring a working knowledge of ladder diagram logics * Coordinate various warehouse activities involving receiving, special order and inventory * Perform other duties requiring similar skills and abilities as assigned Knowledge, Skills, Abilities (Competencies) * Knowledge in blocking, clamping and holding parts to avoid distortion and conform with normal shop tolerances and specifications * Basic knowledge of abrasives, conditions of metal and finish are necessary * Ability to read, interpret and work from blueprints, sketches and other specifications with proficiency Education and Experience * High school diploma or equivalent preferred. Basic Blueprint reading, basic welding and basic grinding Base Compensation Range: $19.00 - $20.80 per hour Shift Differential: $2.00 per hour Variable Compensation Range: Incentive bonus eligibility up to 10% of gross annual salary base on company performance (as of 2024). Health and Ancillary Benefit Overview: * Medical, Dental & Vision Insurance with low employee premiums * Free off-site medical clinic * Company paid Life Insurance & Short-Term Disability * 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more * Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades * Paid Time Off and Sick, Family & Parental Paid Time Off * Ten (10) Paid Holidays * Four-day work weeks, varied shifts, and flexible remote work options depending on position * Career progression program for advancement * Free in-house welding, grinding & machine operation school * In-house training program WORK ENVIRONMENT: Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this position, the employee is regularly required to walk, stand, use hands and fingers, handle, grasp or feel; reach with hands and arms climb or balance; stoop, kneel, crouch or crawl. Additional effort requirements consist of, but are not limited to, lifting, pushing and pulling material, stairs, and ladders. When there is an occasion to move heavy material greater than 50 pounds, the operator will request assistance from another operator, or utilize provided lifting equipment.

We are seeking a skilled and experienced Mechanical Fitter/HVAC Technician to perform installation, fabrication, maintenance, and repair of mechanical piping systems across commercial and industrial facilities. The ideal candidate will have hands-on experience working with various piping materials and HVAC systems, possess a strong understanding of mechanical schematics and blueprints, and be committed to delivering high-quality workmanship in compliance with safety and industry standards. Primary Responsibilities: Install, fabricate, maintain, and repair piping systems carrying water, steam, air, gas, chemicals, and other fluids in commercial and industrial environments. Work with a variety of materials including carbon steel, stainless steel, copper, plastic piping, and other specialized materials. Inspect and troubleshoot mechanical and plumbing systems to identify and resolve leaks, blockages, corrosion, or equipment failures. Replace or repair damaged or faulty piping, valves, pumps, and fixtures to ensure system integrity and performance. Perform routine maintenance to ensure safety, efficiency, and longevity of mechanical systems. Assemble piping using welding, brazing, soldering, threading, grooving, and mechanical fittings with appropriate tools and equipment. Install and commission mechanical service piping systems including HVAC, chilled water, steam, compressed air, fire protection, and other process piping. Conduct pressure tests to detect leaks and verify system alignment and compliance with design and performance standards. Read and interpret piping blueprints, isometric drawings, P&IDs (Piping and Instrumentation Diagrams), and building plans to guide work. Coordinate system layouts, installations, and repairs with other trades and construction teams to meet project timelines and specifications. Basic Qualifications TS/SCI w/ Poly Clearance is required High school diploma or equivalent. 5+ years of relevant hands-on experience in HVAC maintenance and repair. Completion of a formal training program in HVAC technology or a related field. Proficient in diagnosing mechanical and electrical issues using diagnostic tools such as motor analyzers, pressure gauges, and factory manuals. Ability to disassemble, repair, and reassemble other major HVAC systems. Skilled in using standard hand tools and power tools commonly used in HVAC repair. Working knowledge of cooling systems, hydraulics, pneumatics, and preventive maintenance practices. Familiarity with performing routine mechanical inspections and safety checks. Ability to work independently with limited supervision and solve moderately complex mechanical problems. Preferred Qualifications Associate degree, trade school certification, or vocational training in Mechanical Fitting, HVAC, Diesel Mechanics, or a closely related technical field. 5+ years of hands-on experience in mechanical fitting, HVAC system maintenance, or industrial equipment repair. Certification in HVAC systems (e.g., EPA 608) or relevant mechanical trade certifications (e.g., Cert III in Engineering - Mechanical Trade or equivalent). Proven ability in advanced troubleshooting and root cause analysis of mechanical, HVAC, and electro-mechanical systems. Experience working with hydraulic and pneumatic systems in commercial, industrial, or plant environments. Familiarity with energy-efficient HVAC technologies, ventilation systems, and sustainable mechanical practices. Understanding of maintenance planning and project coordination, including parts procurement and job scheduling. Knowledge of quality assurance protocols, mechanical compliance standards, and relevant building codes. Strong commitment to workplace safety with demonstrated knowledge of occupational safety regulations (e.g., OSHA or local equivalents). EC-DAS Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don't wear capes (they're a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for “how it's always been done.” Original Posting:September 2, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $57,850.00 - $104,575.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Full-time Description Fabricates HVAC and roofing supplies. Sets up and operates special purpose machines and machining centers to fabricate metal parts. Maintains and operates shop equipment and tools while performing quality work in a timely and efficient manner Qualifications Lift up to 50 pounds The environment is mainly inside but may involve some outdoor delivery Previous metal fabrication experience preferred but not required

Job Description If you enjoy building, assembling, and working with tools, we want you! Join TechnoGuard's fast-growing fabrication team and support the production and assembly of our data center airflow containment systems. You'll build and assemble the panels, doors, and other structural components that keep the region's data centers running safely and efficiently. We're looking for candidates with hands-on fabrication or construction experience-whether building structures, working with metal, carpentry, or installing specialized systems. WHAT YOU'LL DO: Use power tools and hand tools to fabricate containment system components per design specifications. Collaborate with the Production Manager to meet daily production goals and uphold rigorous standards of quality control. Maintain tools and shop equipment, ensuring safety and readiness for fabrication work. Stage materials and track inventory usage to ensure an efficient workflow. Keep work and storage areas clean, organized, and compliant with safety protocols. Occasionally assist with product deliveries to off‑site locations. REQUIREMENTS: 6 months+ of fabrication or construction experience preferred. Proficiency with hand tools and power tools required. Attention to detail in a busy environment. Forklift certification or willing to obtain. OSHA‑10 or OSHA‑30 certification or willing to obtain. High school diploma or GED. Valid/current driver's license. U.S. citizenship Applicants must be able to work in areas exposed to constant loud noises, temps ranging between 0-100 degrees, and be able to lift 50lbs and be on their feet 50% of day or more. Hours 6AM-3PM Mon-Fri. (Overtime As Needed).

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a Thermal Blanket Fabrication Technician to join our team in supporting the production of high-performance satellites. This role involves the precise fabrication, assembly, and installation of thermal insulation blankets. The ideal candidate will have strong manual dexterity, attention to detail, and experience working with specialized materials in a fast-paced environment. Key Responsibilities: Fabricate custom thermal blankets based on engineering drawings, patterns, and technical specifications Measure, cut, sew, and assemble thermal insulation materials such as reflective films and foils Operate industrial sewing machines, hot knives, and other fabrication tools safely and accurately Apply binding, Velcro, snaps, and other fasteners to thermal blankets as required Perform quality control checks to ensure accuracy, proper fit, and compliance with specifications Read and interpret technical drawings, blueprints, and schematics Collaborate with engineering and quality teams to resolve fabrication issues or suggest improvements Maintain a clean and organized work area and follow all safety protocols Track materials used and maintain documentation for traceability May assist with on-site installation or fitting of thermal blankets in equipment or systems Qualifications Education: High school diploma or equivalent Experience: A minimum of 1-3 years in fabrication, sewing, insulation, or a related field Preferred Qualifications: Experience in aerospace, industrial insulation, or thermal systems manufacturing Knowledge of aerospace film materials and their properties Experience with pattern making or custom sewing/fabrication Soft Skills: Strong interpersonal skills Proven ability to collaborate effectively within cross-functional teams Excellent written and verbal communication skills Meticulous attention to detail to ensure the accuracy of all documentation and project deliverables Ability to work independently and manage time effectively in a fast-paced environment Technology Stack: Industrial sewing machines Hot knives and cutting tools Basic computer skills for documentation and traceability Ability to read and interpret CAD drawings and technical schematics Physical Requirements: Ability to work in a standard fabrication environment Ability to lift up to 50 lbs. Ability to stand for extended periods Manual dexterity for handling small components and tools 25% travel required to Midland, TX This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands . AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Palace Petites is scheduled to relaunch in Spring/Summer of 2015. It will provide one-stop shopping for fashionable ladies 5'3″ in height or plus petite. Palace Petites will showcase haute couture designs for petite sizes 2 - 12 Job Description The company is looking to relaunch the business as a label.A skilled pattern designer/maker/cutter is needed.Additionally, the person will need to be able to use the pattern to make samples, including performing the necessary alterations.This is a small contractual project, but looking to build interest with a few initial designs. Qualifications Profile The ideal candidate will have proven experience making a pattern from raw sketches and completing the fabrication of a sample from that sketch. Must be interested in working with a start-up and with those new to the Fashion Industry. Specific needs Must be able to work independently, taking directions from email and voice conversations. Additional Information Thank you for your interest! To Apply: Please enter in your work history into the online application, along with a cover letter and be certain to provide both an email and telephone number for contact. Your cover letter should include: Your name, address, telephone number, email address, the URL to your online portfolio, and a second page containing your professional references. In addition to your resume and cover letter, please submit a link to your online portfolio as an attachment and three (3) professional references. Include both a phone number and an email address for each of your references.

KGa Uses E-Verify to Confirm Eligibility to work in the United States. »»»»» This is a FULL-TIME position for our IJAMSVILLE, MD location !!! ««««« PAY STARTING AT $19.00/HOUR (based on experience) KGa offers stability, competitive pay, comprehensive benefits package, and growth potential!! ******************************************************************************************************************************************************************************************************************************* WHY WORK FOR KENSINGTON GLASS ARTS? Kensington Glass Arts specializes in high-end interior glass work, typically for law firms and organizations with very upscale office interiors. The company is unique in that we manufacture and install architectural glass products. KGa single source capacity provides for a unique capability to control the destiny of our projects from beginning to end. ******************************************************************************************************************************************************************************************************************************* GENERAL SUMMARY The Fabrication Technician is responsible for taking an active role in the fabrication department and fabricating glass as required by the production schedule. KEY RESPONSIBILITIES Responsible for accurately fabricating all glass as required. Responsible for sorting and staging glass as required. Responsible for maintaining a clean work environment; cleaning up breakage, disposing of damaged glass, keeping a clean floor area around walking surfaces, keeping station desks clean and organized, etc. Maintain, clean and organize all cutoff and specialty stock racks. Expected to participate in any activity requiring additional help, helping and organizing as required. Responsible for maintaining regular cleaning, repair and general maintenance of the machines and coordinating those efforts with our workload and management. Expected to be instrumental and responsive to changes in the production schedule as required. Other duties as assigned. Fabrication Technician will be OSHA 10 certified. SPECIFIC DUTIES Assist in developing and maintaining Standard Operating Procedures (SOPs) for cutting processes. Assist in design and implementation of production KPMs. Assist in identification of KPMs to create a completely accountable, 100% customer satisfaction goal. PHYSICAL DEMANDS While performing the duties of the job the employee is regularly required to stand, walk, use hands to finger handle, or feel, reach with hands and arms and talk or hear. The employee exerts up to 100 lbs. of force occasionally, and/or up to 50lbs. of force frequently, and/or up to 20 lbs. of force constantly to move objects. Vision requirements include clarity of vision at 20 inches or less; clarity of vision at 20 feet or more; ability to identify and distinguish colors; the ability to observe an area that can be seen up and down or the left and right while eyes are fixed on a given point; the ability to judge distances and spatial relationships; and the ability to adjust the eye to bring an object into sharp focus. Work is performed in shop environment with frequent exposure to moving mechanical parts, outdoor weather conditions and vibration. There is occasional exposure to humid and extreme non-weather related cold or hot conditions. There is frequent exposure to constant very loud sounds sufficient enough to cause distraction. DISCLAIMER This indicates in general terms, the type and level of work performance as well as the typical responsibilities of the job. The responsibilities described are not to be interpreted as being all-inclusive to any specific employee. Management reserves the rights to add, modify, change, or rescind the work assignments of different positions. Nothing in this job description changes the at-will employment relationship existing between KGa and its employees. All candidates must have the ability to work at our Ijamsville, MD location and submit to a pre-employment drug test and a background check. We offer a comprehensive benefits package including medical and dental insurance, life insurance, long and short-term disability, and a 401(k) plan. Kensington Glass Arts is an Equal Employment Opportunity Employer. #KensingtonGlassArts #KGa #KensingtonGlass #KGaGreat #NowHiringMaryland #NowHiringVirginia #Maryland #Virginia #MDJobs #MDJobSeekers #VirginiaJobs #MarylandJobs #Glazier #GlazierLife #GlazierNation #GlaziersPride #GlassTempering #GlassBusiness #GlassJob #NowHiringConstruction #Construction #ConstructionCareers #ConstructionLife #ConstructionWork #ConstructionWorker #ConstructionCompany #ConstructionJobs #TemperedGlass #LaminatedGlass #manufacturing #industrial #production #machineoperator

American International Contractors (Special Projects), Inc. (AICI-SP) has established itself as one of the leading construction firms in the Department of State, Overseas Building Operations (OBO) program and Department of Defense (DOD). We continue to win important contracts and projects throughout this program and others. HVAC Ductwork Fabricator/Installer must possess an active SECRET clearance, a valid passport, and the ability to obtain appropriate work visas and other required documentation. It is preferred that individuals have experience working on previous OBO projects overseas. Responsibilities include, but not are limited to the following, (unless otherwise noted, all duties are performed regularly and/or frequently, depending on job tasks assigned for the given workday): ESSENTIAL DUTIES AND RESPONSIBILITIES: Must be able to read and understand blueprints Must have a basic understanding of the SMACNA Experience in fabricating Ductwork and installing Ductwork, Insulation, Air Handling Units, Fan Coil Units, VAV Boxes and other HVAC components. Have knowledge of duct work fabrication machines and tools in order to layout and fabricate all types of ductwork fittings and ductwork Transfer any required materials from the SSA yard to the work area either by escorting local personnel or physically doing it yourself Assist other trades, if required Other duties as assigned and as needed JOB REQUIREMENTS: 2+ years' construction industry experience preferred Basic understanding of construction principles and procedures High school diploma/GED preferred General knowledge of the use of hand tools to cut and shape materials as per instruction General knowledge of operating construction equipment and vehicles Flexibility in working overseas Understanding and adherence to local laws and customs in host country Following all Government site security requirements to maintain eligibility to work on project site Ability to take direction and work well with others, including meeting attendance requirements necessary to keep job on schedule and adherence to safety protocols PHYSICAL, MENTAL AND ENVIRONMENTAL DEMANDS: The demands described here are not exhaustive, but are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions in accordance with applicable law, provided that the individual does not pose a direct threat to the health or safety of others when performing such essential functions. Physical Demands: While performing the duties of this job, the employee is regularly required to, among other things, use hands to grasp and reach up with arms overhead, including manual dexterity to operate equipment, cut, pull wiring, and perform specialized skills. The employee must have the ability to regularly and for extended periods of time stoop, squat, stand, walk, twist, balance, climb (ladder and stairs of high-rise building), kneel, crouch, speak, carry, and hear. There is a minimal demand for sitting, other than during periods of extended travel (such as to and from the project location). The employee must have the ability to regularly lift, carry, push or pull and move objects weighing up to approximately 50 pounds of weight without assistance. The employee may also need to occasionally life, carry, push or pull and move objects exceeding 50 pounds without assistance. The job imposes a substantial demand for physical agility and mobility, including the ability to maneuver safely throughout the work site. This position will require the use of personal protective equipment during various tasks and activities. The employee must be able to hear warning sounds and alarms, communicate effectively with coworkers and follow spoken directions. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Mental Demands: The position requires a high degree of concentration in a busy environment. There is a substantial demand for analyzing, perceiving, comprehending, rapid decision making and exercising sound judgment to ensure individual and coworker safety in a potentially dangerous environment. Ability to follow directions and meet deadlines is critical. Environmental Demands: The position entails working on a busy construction site overseas, generally away from the employee's family, and in countries whose laws and social norms may be much more restrictive than in the United States, with the potential for occasional periods of social unrest, military action, interruption of normal services such as electricity and water, natural disasters, and the like. Work involves a 60-hour workweek, 6 days a week/ 10 hours per day. Flexibility with hours/days is required. Individuals must have comfort working in a high-stress environment and be able to perform the above activities in extreme hot, cold, humid, and wet conditions depending on location and season. Frequent exposure to construction equipment and sharp tools, including power tools, and materials. May involve frequent repetitive motions. Some exposure to toxic/caustic chemicals, potential electric shock, significant heights and high noise level, including high-pitched noises. Some potential exposure to dust, fumes, smoke and airborne particles. #CJ American International Contractors, Inc. is an EEO/AA/Disability/Vets Employer

JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. **THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS** **MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS** Benefits for Experienced Millwrights, Welders, Fabricators: Perdiem/hotel Health, Dental, Vision Paid Time Off 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: Follow instructions from supervisors and/or crew foremen while maintaining all safety standards Perform various physical duties assigned Move, secure, install, build, load and/or unload materials, tools and equipment Welding and fabrication for repairs and install of plant equipment, chutes and crushers Properly repair and install mechanical parts for equipment Read schematics and instruction manuals to make equipment repairs if needed Stick Weld and use Oxy/Act torches safely and efficiently Use hand tools and power tools safely and efficiently Clean/prepare job site Assist skilled tradespeople in their duties Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: Must be 18 or older Ability to routinely climb stairs, ladders and/or platforms, bend and squat Ability to walk, stand or sit for prolonged periods of time Ability to consistently lift and/or move up to 50 pounds throughout the shift Able to work any shifts, including overtime, weekends and holidays required. Ability to pass background and drug & alcohol testing required. MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

The Clinical DME Fitter is responsible for providing personalized fitting services and education to patients requiring durable medical equipment, such as orthotic devices, prosthetics, and other medical assistive devices. The role involves working closely with healthcare professionals and patients to ensure the proper fit, function, and use of medical equipment. Responsibilities: Conduct patient assessments to determine appropriate durable medical equipment needs. Take accurate measurements and perform fittings for orthotic and prosthetic devices in alignment with patients' individual requirements. Educate patients and their caregivers on the proper use, care, and maintenance of durable medical equipment. Collaborate with healthcare providers, such as physicians, physical therapists, and occupational therapists, to ensure coordinated care and optimal patient outcomes. Maintain detailed records of patient assessments, fittings, and equipment provided. Stay current with industry trends, advancements in durable medical equipment, and best practices for patient care. Qualifications: At least 1 year of proven experience in fitting and providing education on durable medical equipment, preferably in a clinical or healthcare setting. Knowledge of human anatomy and physiology, particularly as it relates to the fitting of orthotic and prosthetic devices. Familiarity with a variety of durable medical equipment, including but not limited to braces, supports, orthoses, and prostheses. Strong interpersonal and communication skills, with the ability to effectively interact with patients, caregivers, and healthcare professionals. Attention to detail and the ability to accurately measure and fit medical equipment to meet individual patient needs. Certification or licensure as a clinical DME fitter preferred. Skills: Patient assessment and evaluation Fitting and adjustments of durable medical equipment Patient education and training Collaboration and communication with healthcare professionals Record-keeping and documentation Knowledge of medical terminology and anatomy Work Environment: Clinical DME Fitters typically work in clinical settings, such as hospitals, rehabilitation centers, orthopedic clinics, or prosthetic and orthotic facilities. The role may involve standing for extended periods and interacting with patients of diverse backgrounds and medical conditions.

Project Pipe Welder (Construction - Willow L9911) - Prudhoe Bay, AK - PRU0123Company: WorleyPrimary Location: USA-AK-Prudhoe BayJob: WelderSchedule: Full-time Employment Type: EmployeeManagement Level: Individual ContributorInternational Transfer Opportunity: NoJob Posting: Dec 8, 2025, 3:38:27 PMUnposting Date: Jan 8, 2026, 8:59:00 AMContact Name - Internal: Bobilea Christine AkersReporting Manager Title: General Superintendent Construction This is a temporary, remote position, located on the North Slope, with an expected duration of 6-8 weeks, with the potential for additional work scope to be added. Anticipated start date is March 2026. The typical schedule is 84 hours per week (40 hours straight time and a minimum of 44 hours at time and a half). All meals and lodging are provided by Worley while the employee is on location. Transportation between Anchorage and Prudhoe Bay is provided. Relocation assistance to Alaska is not provided. Worley offers a competitive benefits package, with company paid short-term disability, life insurance, paid sick leave, and 4. 5% employer match on 401k. Performs welding of pipe, flanges and various fittings for fabrication or repair of machine parts, plant equipment and structures according to layout, blueprints or work orders using various welding processes. Essential Job Functions:· Constructs, maintains, and modifies piping systems and process equipment related to petrochemical or other industry by welding of pipe, flanges and various fittings using applicable welding techniques and processes required to produces welds that meet applicable codes and client requirements. · Measures pipe routing and draft pipe configuration. · Perform repair, prep, grinding and re-weld procedures on pipe to meet proper welding codes· Completes records, maintains tools and equipment, and performs various cleanup and housekeeping activities. Knowledge, Skills & Abilities:· Knowledge of the AWS, ANSI and ASME codes. · Knowledge of operation of welding equipment, beveling machines, electrodes, fluxes, shielding gasses and welding processes. · Knowledge of the various size and grades of welding electrodes, the proper use of electrodes and welding processes, the appearance of a proper fit-up and the appearance of properly cleaned and prepared surface· Ability to properly use and care for the tools and equipment and welding electrodes commonly used on an industrial project. · Ability to read, understand engineering prints. · Advanced ability to lay out, fit, and weld fabricated piping components to assemble tanks and pressure vessels according to blueprints, specifications, and knowledge of welding. · General knowledge of carbon steel welding techniques. · General knowledge including alloy metals, stainless steel, and duplex welding techniques. · Thorough knowledge of the AWS, ANSI and ASME codes. Physical Demands/Work Environment:Work is performed in a remote Arctic environment with limited medical resources. Candidate understands the site is approximately 840 miles (at least 4 hours by air ambulance) from surgical, specialist, and tertiary medical care, and where medical evacuation from this location may be significantly delayed due to weather conditions. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the essential functions of this job, the employee is required to: · Must have ability to stand, walk on level, uneven and slippery surfaces, sit, squat, kneel, crawl, reach through low and high ranges, work overhead, and exhibit normal balance and coordination. These basic physical requirements are essential for safe performance of the job in harsh environments with exposure to very cold temperatures and while wearing arctic gear. · Standing for prolonged periods of time. · Driving for prolonged periods of time in the dark and inclement weather· Ability to climb scaffold, ramps, stairs, equipment, portable ladders, and/or wellhouse/tank/facility fixed ladders of 20 feet or greater. · Ability to wear and utilize fall protection within manufacturer specifications. · Lift 50 lbs. from floor to waist with two hands. · Lift 50 lbs. from floor to shoulder with two hands. · Carry 50 lbs. for 15 feet with two hands. · Push/pull 60 lbs. sled for 20 feet. · Push/pull 90 lbs. cart for 20 feet. This job description is intended to describe the nature and level of work being performed by people assigned to this position. It is not to be construed as an exhaustive list of all responsibilities and duties required of the job incumbents. Worley provides reasonable accommodation to qualified individuals with disabilities, including both applicants and employees, to allow the individual to perform the essential functions of the job, unless doing so would create an undue hardship. In-Vehicle Monitoring System: As part of our commitment to safety and accountability, company vehicles are equipped with in-cab cameras and vehicle monitoring systems. These systems may record video and audio, as well as collect GPS location, vehicle speed, harsh braking, rapid acceleration and other driving behaviors. All data is subject to review by management to ensure compliance with company policies and safe driving practices. · Three to five (3-5) years' experience pipe welding in an industrial environment· Required to pass FCAW, GTAW and SMAW pipe weld tests upon offer· Valid driver's license including ability to be insured by Worley's auto insurer· High School diploma or equivalent GED· North Slope Training Cooperative (NSTC). Worley can provide NSTC certification training if needed Preferred Qualifications:· Petrochemical, oilfield and arctic experience Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. /span>Whatever your ambition, there's a path for you here. And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Recruitment fraud notice Worley has been notified of fraudulent employment inquiries and/or offers being made to prospective candidates. These activities have generally occurred via email but may occur by other means. Generally prospective candidates are being asked to provide detailed personal information and possibly being asked to pay application fees. Worley does NOT require any payment or fees from prospective candidates. Do not provide any personal/financial information whatsoever, and do not make any payments requested by any email or other communication requesting such data to secure employment with Worley or any of its subsidiaries. If you receive such a message, you are advised to contact your local law enforcement agency and provide any details you may have. If you are interested in employment with Worley, please view the career information on our website and follow application instructions for career opportunities for which you are qualified.

MMF is a division of MAC specializing in structural steel fabrication and modification. We serve a diverse client base including general contractors, universities, government entities, and private companies. Our fabrication shop produces high-quality steel components for commercial buildings, institutional facilities, and custom structural applications. Our Apprentice Fabrication Welder plays a key role in producing steel components that meet precise specifications for a variety of construction and infrastructure projects. This shop-based position requires proficiency in multiple welding processes, attention to detail, and a commitment to safety and quality. Requirements Key Responsibilities · Fabricate and weld steel components using GMAW (MIG), SMAW (Stick), and FCAW (Flux Core) processes. · Interpret and work from detailed blueprints, shop drawings, and welding symbols. · Operate fabrication equipment including saws, grinders, drills, and presses. · Perform layout and fit-up of steel assemblies prior to welding. · Conduct visual inspections and measurements to ensure weld quality and dimensional accuracy. · Maintain welding equipment and tools in good working condition. · Follow all safety protocols and contribute to a clean, organized shop environment. · Collaborate with supervisors and project teams to meet production schedules and quality standards. Qualifications · High school diploma or GED required. · Minimum 2 years of experience in structural steel fabrication or welding (current enrollment in CTC or CC welding program can substitute for experience). · Proficiency in GMAW, SMAW, and FCAW welding techniques. · Ability to read and interpret technical drawings and welding symbols. · Familiarity with fabrication shop tools and equipment. · Ability to work flexible schedules, including overtime or weekends when needed. · Willingness and ability to obtain certifications required for specific tasks and equipment operation. · Strong understanding of OSHA safety standards and shop safety practices. PHYSICAL DEMANDS AND WORK ENVIRONMENTAL FACTORS (The factors described here are representative of those physical demands that must be met by an employee to successfully perform the essential functions of this job. The environmental factors described are representative of those encountered while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 60 pounds and move up to 10 feet. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Salary Description 21.00-25.00

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a Thermal Blanket Fabrication Technician to join our team in supporting the production of high-performance satellites. This role involves the precise fabrication, assembly, and installation of thermal insulation blankets. The ideal candidate will have strong manual dexterity, attention to detail, and experience working with specialized materials in a fast-paced environment. Key Responsibilities: * Fabricate custom thermal blankets based on engineering drawings, patterns, and technical specifications * Measure, cut, sew, and assemble thermal insulation materials such as reflective films and foils * Operate industrial sewing machines, hot knives, and other fabrication tools safely and accurately * Apply binding, Velcro, snaps, and other fasteners to thermal blankets as required * Perform quality control checks to ensure accuracy, proper fit, and compliance with specifications * Read and interpret technical drawings, blueprints, and schematics * Collaborate with engineering and quality teams to resolve fabrication issues or suggest improvements * Maintain a clean and organized work area and follow all safety protocols * Track materials used and maintain documentation for traceability * May assist with on-site installation or fitting of thermal blankets in equipment or systems Qualifications Education: High school diploma or equivalent Experience: A minimum of 1-3 years in fabrication, sewing, insulation, or a related field Preferred Qualifications: * Experience in aerospace, industrial insulation, or thermal systems manufacturing * Knowledge of aerospace film materials and their properties * Experience with pattern making or custom sewing/fabrication Soft Skills: * Strong interpersonal skills * Proven ability to collaborate effectively within cross-functional teams * Excellent written and verbal communication skills * Meticulous attention to detail to ensure the accuracy of all documentation and project deliverables * Ability to work independently and manage time effectively in a fast-paced environment Technology Stack: * Industrial sewing machines * Hot knives and cutting tools * Basic computer skills for documentation and traceability * Ability to read and interpret CAD drawings and technical schematics Physical Requirements: * Ability to work in a standard fabrication environment * Ability to lift up to 50 lbs. * Ability to stand for extended periods * Manual dexterity for handling small components and tools * 25% travel required to Midland, TX This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

CORTLAND BIOMEDICAL - Who we are Cortland Biomedical custom builds high-performance biomedical textile structures. The company applies over 40 years of experience in textile engineering and advanced fabric design methods to braid, knit and woven products that meet the demands of a diverse set of customers in the biomedical product space. The company also offers a full range of design, development and manufacturing services as well as a wide variety of biomedical materials. Never comfortable with the status quo, complex biomedical textile challenges are tackled with agility, credibility and curiosity. Cortland Biomedical is wholly owned by Enerpac Tool Group. Enerpac Tool Group Corp. is a premier industrial tools, services, technology, and solutions provider serving a broad and diverse set of customers and end markets for mission-critical applications in more than 100 countries. The Company makes complex, often hazardous jobs possible safely and efficiently. Enerpac Tool Group's businesses are global leaders in high pressure hydraulic tools, controlled force products, and solutions for precise positioning of heavy loads that help customers safely and reliably tackle some of the most challenging jobs around the world. The Company was founded in 1910 and is headquartered in Milwaukee, Wisconsin. Enerpac Tool Group common stock trades on the NYSE under the symbol EPAC. For further information on Cortland Biomedical, visit the Company's website at ************************************ For further information on Enerpac Tool Group and its businesses, visit the Company's website at ********************************** CORTLAND BIOMEDICAL - Why join us? * Help create life sustaining medical products! * Work seated/standing in an air conditioned, clean, and sterile environment. * 15 days Paid Time Off available immediately (prorated based on start date) * Medical, Dental, and Vision coverage effective first of the month after hire date * 401(k) and company match vested immediately * Basic Life Insurance provided by company; Supplemental Insurance available * Shift Premium for 2nd and 3rd shift schedules * Annual Bonus Eligibility Summary - basic function of the role Under direct supervision, performs routine and repetitive assembly operations and processes. Work Schedule: Monday - Friday Location: In-office Monday - Thursday, Friday optional work-from-home 850 Lime Hollow Rd. Cortland, NY13045 Compensation: $17.60/hr. Second Shift Premium: $0.50/hr. This role is not eligible for sponsorship. Job Duties and Responsibilities * Act in a safe manner in all activities performed and promote the Safety Program in all processes and procedures * Ensures all quality standards and requirements are met in fabrication, inspection and packaging tasks * Adhere strictly to all assembly or fabrication related procedures, work instructions and forms while performing any and all tasks * Complete all tasks efficiently and correctly as assigned by supervisory and planning personnel * Complete product rewind activities when assigned * Follow instructions and manages multiple tasks to meet production deadlines and customer satisfaction * Report any deficiencies in material, product, or process immediately per current procedures * Support other manufacturing areas, shifts, and overtime hours as needed to support customer delivery expectations * Document all production and packaging information as required ensuring that the information is correct and accurate * Conduct 5S and housekeeping activities as assigned * Understand and apply the Quality Policy, quality documentation, and company objectives to all tasks assigned * Act in a courteous and professional manner at all times, within a team environment, ensuring sustainment of Cortland Company's reputation as a world class supplier * Promote and participate in LEAD (Lean Enterprise Across Disciplines) transformation through application of lean principles to rapidly improve manufacturing and key LEAD metrics Skills and Competencies * Ability to use small hand tools and measurement devices * Must demonstrate hand and eye coordination for detailed/small fabrication work * Must demonstrate effective verbal and written communication skills * Ability to identify potential issues and proactively recommend and implement solutions * Ability to work collaboratively with other functions * Ability to manage multiple priorities under tight timelines Education and Experience Education Requirements: High School diploma or GED preferred. Experience Requirements: Manufacturing, fabrication or production experience preferred. Physical Demands Employee may have to lift documents/work materials up to 30 pounds in weight. Work completed can be done in seated or standing position. Repetitive fabrication work requires significant hand and finger movements. Work Environment Primary work environment is a controlled manufacturing space with specific gowning and PPE requirements. Proper demonstration of correct execution of these gowning and PPE requirements would be required. Stretching is also required periodically as part of the job. The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. Direct Reports N/A Key External Contacts/Clients N/A EEO Statement Enerpac is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status in accordance with applicable federal, state, and local laws. We are committed to creating an inclusive environment for all employees and applicants and encourage candidates of all backgrounds to apply. If you are an individual with a disability and you need assistance or a reasonable accommodation during the application process, please reach out to us at: ********************* If you're looking for a unique, exciting career with variety and potential for growth, Enerpac Tool Group offers challenges and rewards for people on a global scale.

We are seeking a skilled and experienced Mechanical Fitter/HVAC Technician to perform installation, fabrication, maintenance, and repair of mechanical piping systems across commercial and industrial facilities. The ideal candidate will have hands-on experience working with various piping materials and HVAC systems, possess a strong understanding of mechanical schematics and blueprints, and be committed to delivering high-quality workmanship in compliance with safety and industry standards. Primary Responsibilities: Install, fabricate, maintain, and repair piping systems carrying water, steam, air, gas, chemicals, and other fluids in commercial and industrial environments. Work with a variety of materials including carbon steel, stainless steel, copper, plastic piping, and other specialized materials. Inspect and troubleshoot mechanical and plumbing systems to identify and resolve leaks, blockages, corrosion, or equipment failures. Replace or repair damaged or faulty piping, valves, pumps, and fixtures to ensure system integrity and performance. Perform routine maintenance to ensure safety, efficiency, and longevity of mechanical systems. Assemble piping using welding, brazing, soldering, threading, grooving, and mechanical fittings with appropriate tools and equipment. Install and commission mechanical service piping systems including HVAC, chilled water, steam, compressed air, fire protection, and other process piping. Conduct pressure tests to detect leaks and verify system alignment and compliance with design and performance standards. Read and interpret piping blueprints, isometric drawings, P&IDs (Piping and Instrumentation Diagrams), and building plans to guide work. Coordinate system layouts, installations, and repairs with other trades and construction teams to meet project timelines and specifications. Basic Qualifications TS/SCI w/ Poly Clearance is required High school diploma or equivalent. 2-4 years of relevant hands-on experience in automotive maintenance and repair. Completion of a formal training program in automotive technology or a related field. Proficient in diagnosing mechanical and electrical issues using diagnostic tools such as motor analyzers, pressure gauges, and factory manuals. Ability to disassemble, repair, and reassemble engines, transmissions, and other major automotive systems. Skilled in using standard hand tools and power tools commonly used in automotive repair. Working knowledge of cooling systems, hydraulics, pneumatics, and preventive maintenance practices. Familiarity with performing routine vehicle inspections and safety checks. Ability to work independently with limited supervision and solve moderately complex mechanical problems. Preferred Qualifications Associate degree or vocational certification in Automotive Technology, Diesel Mechanics, or a related technical field. 5+ years of experience in maintaining and repairing a wide range of vehicles including trucks, buses, and forklifts. ASE (Automotive Service Excellence) certification or equivalent industry credentials. Advanced troubleshooting and failure analysis skills. Experience working with both hydraulic and pneumatic systems in industrial or fleet settings. Knowledge of energy-efficient automotive systems and technologies. Familiarity with project management principles as they relate to repair timelines and parts procurement. Demonstrated understanding of quality control standards and vehicle compliance requirements. Strong safety record and knowledge of relevant occupational safety standards. Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don't wear capes (they're a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for “how it's always been done.” Original Posting:June 5, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $46,800.00 - $84,600.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Palace Petites is scheduled to relaunch in Spring/Summer of 2015. It will provide one-stop shopping for fashionable ladies 5'3″ in height or plus petite. Palace Petites will showcase haute couture designs for petite sizes 2 - 12 Job Description The company is looking to relaunch the business as a label.A skilled pattern designer/maker/cutter is needed.Additionally, the person will need to be able to use the pattern to make samples, including performing the necessary alterations.This is a small contractual project, but looking to build interest with a few initial designs. Qualifications Profile The ideal candidate will have proven experience making a pattern from raw sketches and completing the fabrication of a sample from that sketch. Must be interested in working with a start-up and with those new to the Fashion Industry. Specific needs Must be able to work independently, taking directions from email and voice conversations. Additional Information Thank you for your interest! To Apply: Please enter in your work history into the online application, along with a cover letter and be certain to provide both an email and telephone number for contact. Your cover letter should include: Your name, address, telephone number, email address, the URL to your online portfolio, and a second page containing your professional references. In addition to your resume and cover letter, please submit a link to your online portfolio as an attachment and three (3) professional references. Include both a phone number and an email address for each of your references.

Full-time Description Fabricates HVAC and roofing supplies. Sets up and operates special purpose machines and machining centers to fabricate metal parts. Maintains and operates shop equipment and tools while performing quality work in a timely and efficient manner Qualifications Lift up to 50 pounds The environment is mainly inside but may involve some outdoor delivery Previous metal fabrication experience preferred but not required

Job DescriptionDescription: MMF is a division of MAC specializing in structural steel fabrication and modification. We serve a diverse client base including general contractors, universities, government entities, and private companies. Our fabrication shop produces high-quality steel components for commercial buildings, institutional facilities, and custom structural applications. Our Apprentice Fabrication Welder plays a key role in producing steel components that meet precise specifications for a variety of construction and infrastructure projects. This shop-based position requires proficiency in multiple welding processes, attention to detail, and a commitment to safety and quality. Requirements: Key Responsibilities · Fabricate and weld steel components using GMAW (MIG), SMAW (Stick), and FCAW (Flux Core) processes. · Interpret and work from detailed blueprints, shop drawings, and welding symbols. · Operate fabrication equipment including saws, grinders, drills, and presses. · Perform layout and fit-up of steel assemblies prior to welding. · Conduct visual inspections and measurements to ensure weld quality and dimensional accuracy. · Maintain welding equipment and tools in good working condition. · Follow all safety protocols and contribute to a clean, organized shop environment. · Collaborate with supervisors and project teams to meet production schedules and quality standards. Qualifications · High school diploma or GED required. · Minimum 2 years of experience in structural steel fabrication or welding (current enrollment in CTC or CC welding program can substitute for experience). · Proficiency in GMAW, SMAW, and FCAW welding techniques. · Ability to read and interpret technical drawings and welding symbols. · Familiarity with fabrication shop tools and equipment. · Ability to work flexible schedules, including overtime or weekends when needed. · Willingness and ability to obtain certifications required for specific tasks and equipment operation. · Strong understanding of OSHA safety standards and shop safety practices. PHYSICAL DEMANDS AND WORK ENVIRONMENTAL FACTORS (The factors described here are representative of those physical demands that must be met by an employee to successfully perform the essential functions of this job. The environmental factors described are representative of those encountered while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 60 pounds and move up to 10 feet. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud.