Welder assistant jobs near me

The Olen Corporation and Area Aggregates, one of the largest construction aggregates producers in the Midwest, has been a leader in the industry for over 50 years. With multiple locations serving Central, Northeast, and Northwest Ohio, Olen is dedicated to providing top-quality aggregate products, including natural sand, gravel, and limestone, to a diverse range of customers. As an ODOT 1069 prequalified aggregates supplier, Olen sets the standard for quality and service in the industry. Producing over 8 million tons of construction materials each year, Olen is a top thirty-five national producer of quality construction aggregates. Since 1986, Olen has partnered with Kokosing to be one of their top suppliers of construction materials. Committed to excellence, Olen is focused on delivering exceptional customer service while being responsible stewards of the environment and respectful neighbors in the communities we serve. Job Description: Entry- Level Field Welder SUMMARY The Olen Corp is seeking a full time Field Welder working on various pieces of mobile heavy equipment and fixed assets while maintaining our elite fleet of equipment. Travel to various job sites in our region with the ability to work with or without close supervision. Opportunities for continued growth with safety first mindset and attention to detail. ESSENTIAL DUTIES AND RESPONSIBILITIES: Clean work area and restock supplies and materials, as necessary. Assist in installation or assemblies in shop or field Layout and mark weld points on parts or subassemblies. Align components using calipers, rulers, etc. and clamp pieces. Analyze all welds to ensure they are free of porosity and discontinuities. Perform all work in accordance with established safety procedures. Operate laser welding equipment to fabricate and assemble materials based on job specifications. Fabricate, assemble, install, and repair mobile and fixed assets. Uphold policies and procedures to guarantee compliance with company and expectations. Lay out full scale drawings of pipe systems, support, and related equipment, following blueprints. Identify and tag material with written symbol for assembly and inspection. Perform job site housekeeping duties EDUCATION and/or EXPERIENCE Training and certification to weld. Experience with drawing, TIG Weld, C, 3G, GTAW, FCAW, and MIG Welding processes. Demonstrated dexterity and attention to detail. Will strive for continuous improvement on the job. A critical thinker with a demonstrated sound work ethic. Preferred one-year related experience and/or training with welding experience. Requirements Welding experience Valid driver license Excellent communication skills. Able to schedule your own daily, and weekly work and jobs. Flexible hours, Willing to work 50-60 hours a week and Saturdays during peak season. Willing to work outside in hot and cold weather Strong mechanical skills are needed to do repairs and maintenance. KNOWLEDGE, SKILLS AND ABILITIES Ability to read and interpret blueprints and technical drawings Knowledge of metallurgy, thermal dynamics and different types of metals Strong attention to detail for precision work and quality control Strong work ethic Proficient with various welding techniques Customer service Job site and vehicle housekeeping Required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl Lift and/or move up to 50 pounds. CERTIFICATES, LICENSES, REGISTRATIONS Driver's license with clean driving record Welding certifications preferred Olen offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. Olen is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

Welder / Fitters Needed in Columbus, Ohio A national company with a facility in the Columbus, Ohio area is currently seeking several Welder / Fitters for opportunities with their growing team. The position is a Direct Hire opportunity that offers long-term stable employment, opportunities for growth, and great benefits. Welder / Fitters rates are anticipated to start between $25 to $30 an hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and Vision. Qualified Welder / Fitters will have most, if not all of the following skills and experience: 3+ years of MIG Welding, fitting, tacking, and welding steel components per blueprints and welding symbols using MIG welding and related fabrication tools. Must setup welding equipment, perform precision layouts, and ensure welds meet AWS D1.1 standards. Inspect parts for accuracy and quality; prepare and finish workpieces using grinders or other tools. Ability to pass AWS D1.1 3G weld qualification; blueprint reading skills required. Forklift and overhead crane experience. Must be able to work in the United States (No H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc.

Job DescriptionBenefits: 401(k) 401(k) matching Health insurance Paid time off Training & development Vision insurance Schedule: MondayFriday, 5:00 AM 1:30 PM Mid-State Sales, an ISO 9001-certified manufacturing company, is seeking an experienced and detail-oriented TIG Welder to join our high-performance production team. This role is key to producing precision hydraulic fluid conveyance products that meet demanding industry standards. About the Role As a TIG Welder at Mid-State, you will work with carbon steel, stainless steel, and aluminum tubing and end connections. Our products are engineered for high-pressure applications, requiring precision workmanship and a strong focus on quality. Key Responsibilities: Perform TIG welding on carbon steel, stainless steel, and aluminum components. Set up and operate Miller welding equipment for production needs. Execute silver brazing and related preparatory/finishing processes (including cleaning and braze scale removal). Fabricate and repair parts as needed to support production. Maintain quality and safety standards in line with ISO 9001 requirements. Qualifications: Proven experience in TIG welding with strong technical skills. Ability to set up and adjust TIG welding equipment for optimal performance. Knowledge of silver brazing techniques and post-braze cleaning preferred. Quality-focused mindset with attention to detail. Ability to work independently and as part of a team. Why Join Mid-State Sales? Competitive pay based on experience. MondayFriday daylight scheduleno nights or weekends. Steady, full-time work in a clean, organized facility. Opportunities for growth within a stable, established company. If youre a skilled TIG welder looking for a steady schedule, clean work environment, and a company that values quality craftsmanship, we want to hear from you! Apply today to join the Mid-State Sales team.

TIG weld stainless steel components together to fabricate our client's product. Knowledge, Skills & Abilities Ability to work with cordless/pneumatic and basic hand tools. Ability to read a tape measure accurately to 1/16th of an inch. Ability to add and subtract fractions. Ability to TIG weld. Ability to understand and work with build documents and basic drawings. Attention to detail and group problem-solving skills required. Must be mechanically inclined.

For full description, visit: ********************** com/wp-content/uploads/2020/11/WELDER-AD. pdf

Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. - May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. - May repair broken or cracked parts and fill holes. - May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. - May preheat work piece, using hand torch or heating furnace. - May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Job Description Welder / Fitters Needed in Columbus, Ohio A national company with a facility in the Columbus, Ohio area is currently seeking several Welder / Fitters for opportunities with their growing team. The position is a Direct Hire opportunity that offers long-term stable employment, opportunities for growth, and great benefits. Welder / Fitters rates are anticipated to start between $25 to $30 an hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and Vision. Qualified Welder / Fitters will have most, if not all of the following skills and experience: 3+ years of MIG Welding, fitting, tacking, and welding steel components per blueprints and welding symbols using MIG welding and related fabrication tools. Must setup welding equipment, perform precision layouts, and ensure welds meet AWS D1.1 standards. Inspect parts for accuracy and quality; prepare and finish workpieces using grinders or other tools. Ability to pass AWS D1.1 3G weld qualification; blueprint reading skills required. Forklift and overhead crane experience. Must be able to work in the United States (No H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc.

Job Description Job Title: Welder/ Fabricator Company: Firelands Fabrication Reports to: Shop Supervisor FLSA: Hourly A Welder joins and shapes metal and other materials, and welds pieces of metal together. The second shift will be Monday - Thursday, from 4:00pm - 2:30am. There will be a night shift premium included to all hours of work. Essential Functions: Perform welding tasks using various processes such as GMAW, FCAW and stick (SMAW) welding. Read and interpret blueprints, welding symbols, and engineering drawings. Cut, shape, and assemble metal components to create structures or products. Perform all steel layout of secondary parts and holes. Tack welds all secondary parts to main steel member. Complete welding of all secondary pieces if required. Grind and wire wheel steel members. Other duties as assigned. Knowledge, Skills & Abilities: High School Diploma or equivalent. Proven experience as a Welder in a manufacturing or similar environment. Proficient in GMAW, FCAW & Stick (SMAW) welding techniques. Ability to obtain necessary welding certification. Perform work to meet AISC standards. Familiarity with reading and interpreting blueprints and welding symbols. operating overhead cranes and rigging knowledge. Strong attention to detail and precision in work. Welding certification is a plus. Physical stamina and ability to perform manual labor tasks. Working Conditions: The primary work location will be within a manufacturing facility equipped with modern machinery and tools. The facility is designed to provide a controlled environment for welding operations. General start and stop times vary depending on the project, normally working four (4) 10-hour days. Occasional mandatory overtime is to be expected. About the Company JHI Group has two divisions, Janotta & Herner, and Firelands Fabrication. Janotta & Herner is northern Ohio's true design/build general contractor, headquarters in Monroeville Oh. Founded by an Architect and a Building Contractor in 1962, Janotta & Herner has embodied true Design Build Construction from the beginning. For more information, please navigate here. Firelands Fabrication is a 72,000 SF steel fabrication shop located in New London, Oh. Firelands Fabrication is dedicated to meeting all our client's structural and miscellaneous steel needs on time, on budget and to the highest quality standards in the industry. For more information, please navigate here. Benefits Overview: JHI Group offers a comprehensive benefits package including: Health, dental, life, and disability insurance Paid time off and paid holidays Employee Stock Ownership Plan (ESOP) 401(k) with match HSA, FSA & Dependent Care FSA Powered by JazzHR zTw2YM6KHW

RESPONSIBILITIES Practice safe working habits and follow safety policy, procedures and Job Safety Analysis Ability to work towards continuous improvement of product quality welding following prescribed procedures Must be able to position fabricated components in fit-up jigs and fixtures and use turning rigs when necessary Responsible for the high quality of product and good safety habits Responsible for the safety and training of others Responsible for compliance with all documented procedures and employee handbook Responsible for the quality and quantity of the finished product Responsible for creating and maintaining a working team environment Responsible for maintaining good housekeeping Responsible for performing routine preventative maintenance on associated equipment Responsible for safety, quality, and production with limited supervision Be able and required to weld all products within the business unit Must be willing to cross train and fill in as necessary in other departments Perform any additional tasks as requested by the Team Leader QUALIFICATIONS Minimum of 1 year welding experience Be able to read assemblies, and welds from blueprints Prepares, assembles, and tacks weld parts and surfaces to be welded Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage Must be able to read a tape measure and be trained to operate overhead crane

**Welder, $25+/hr** **Responsibilities** + Perform MIG welding primarily on steel, with occasional work on aluminum for specific customer orders. + Interpret blueprints to determine weld locations and ensure proper integration into the final product. + Use a tape measure to verify weld placement and dimensions according to specifications. **Essential Skills** + Proficiency in MIG welding. + Ability to interpret blueprints. + Experience using a tape measure for accurate weld placement. **Job Type & Location** This is a Contract to Hire position based out of Plain City, OH. **Pay and Benefits** The pay range for this position is $20.00 - $29.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Plain City,OH. **Application Deadline** This position is anticipated to close on Jan 6, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

2206 N Bechtle Ave Springfield, OH 45504 Based in Pasadena, California, Dine Brands Global, Inc. (NYSE: DIN), through its subsidiaries, franchises restaurants under Applebee's Neighborhood Grill + Bar, IHOP and Fuzzy's Taco Shop brands. With over 3,500 restaurants combined in 18 countries and 354 franchisees as of December 31, 2023, Dine Brands is one of the largest full-service restaurant companies in the world. For more information on Dine Brands, visit the Company's website located at ******************* We're looking for talented Combo: This restaurant back-of-house job for a combo will focus on clear and reset tables, clean dining area and tables, wash dishes, pots, utensils, silverware, china, and glassware, etc. ensuring that Standard Operating Procedures (SOP) and guest standards of cleanliness are met. Requirements: Team-oriented with a passion to succeed Must be at least 18 years old Eligible to work in the United States Equal Employment Opportunity Statement Dine Brands Global strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, veteran status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other status protected by federal, state, or local law. All employment is decided on the basis of qualifications, merit, and business need. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act and/or other applicable laws and regulations in other jurisdictions. For information on how we collect and use your personal information, please visit our Applicant & Employee Privacy Notice.

MACHINES AND EQUIPMENT Welding and cutting torches, packaging equipment such as tape machines, batch elevators,batch delivery conveyorsvibratory feeders batch minor ingredient, transporter system, batch bins, batch mixers, batch wet screws, batch scaleshot end conveyors, pick and place devices, glue machines, lehrs, hoists, dust collectorsinterceptors, blowers, frit feeders, tanks, ducts, cullet crushers and similar or equivalent equipment. Cullet system components, melter steel, catwalks, ladders, cullet hoppers, water boxes, batch chargers. Man lifts, MIG. TIG, Spray Caste and ARC welding, Plasma Cutters. GAUGES AND TOOLSMiscellaneous large and small power tools and equipment. Must have own tools as specified byforeman. PRODUCTS OR MATERIALSAll materials associated with the repair and maintenance of plant equipment and similar or equivalent products and materials. WORK GUIDES AND INSTRUCTIONSGeneral verbal and occasional written instructions. Operate from blueprints and drawings. QUALITY REQUIREMENTSPerform work of satisfactory quality and quantity in accordance with plant operating procedures. Maintain overall quality awareness. WORK DESCRIPTIONInstall, inspect, repair, PM and maintain all mechanical equipment except forming machines. Working knowledge of Fire Suppression system, troubleshooting and repair Dismantle, move and re-install equipment or machinery. Working knowledge of Compressed Air system, troubleshooting and repair Work in areas involving heights, small work areas, confined space, use fall protection, respirator,gloves, face shield, and other PPERig all types of equipment including batch elevator belts, structural steel, motors, pumps, fans to meet structural standards Lehr work including end roller swap/repair, drive roller swap/repair, Lehr chain repair/replace. Required to do complex welding in all types of formats and situations, type of welding rod, type of gas and ventilation. know correct welding technique that fits the situation and material being used, do work to code. Occasionally required to drain glass from tanks, feeder drain or perform plumber work. Determine tools, equipment and materials required to each project. Have good understanding of reasoning behind different water systems, be able to make repairs and maintainproduction using correct back up systems, soft water, well water, city water, cullet water, throat, cooling towersall respective pumping systems along with emergency back up systems, and their proper usages. Build, install, repair & maintain all sheet metal work, including the construction of guards, patterns, duct work. Repair / Install Robot tooling, cullet conveyors, single line conveyors, unscramblers. understand proper sizing and specifications for bearings, sleeves, key ways, pulleys. Working knowledge of Cracked Gas, Heating Gas, Process Gas process steam, Reactor firing. Gas dryers, gas filters, heat exchangers, instrumentation, gas pressure and usage point evaluation, run piping, black iron, stainless, PVC, copper. Victaulic. Maintain quality Always follow Lock Out, Tag Out procedures Do other work as assigned by supervision.

Legacy Talent Search is currently seeking candidates for a Welder role in Marion, OH. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest quality fabricated steel products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their manufacturing process. Key Responsibilities: · Perform high-quality welding operations in accordance with AWS D1.1 structural welding standards. · Set up, operate, and maintain welding equipment (MIG, flux core, and stick welding as required). · Read and interpret blueprints, drawings, and welding symbols to ensure accurate fabrication and assembly. · Fit and tack components in preparation for final welds while maintaining tight tolerances. · Conduct visual inspections and measurements to verify weld quality and dimensional accuracy. · Follow established safety procedures and maintain a clean, organized work area. · Collaborate with fabrication and quality teams to resolve any production or quality issues. · Report equipment malfunctions, material shortages, or process deviations to supervisors promptly. Qualifications: · AWS D1.1 Certification - MANDATORY. · Proven experience in MIG and flux core welding (dual shield preferred). · Ability to read and interpret fabrication drawings and weld symbols accurately. · Strong attention to detail and commitment to precision workmanship. · Ability to lift up to 50+ lbs and stand for extended periods. · Dependable, safety-conscious, and able to work well within a team environment. · High school diploma or equivalent required. What We Offer: · Competitive hourly wage ($18+ DOE). · Comprehensive benefits package, including health insurance and paid time off. · Opportunities for growth and advancement within the company. · Supportive and inclusive workplace culture. · A chance to work with a respected leader in the fabrication industry. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

6:00AM-8:00PM F-M Rumpke is a family owned and operated company that ranks as one of the largest firms in the waste and recycling industry. Our mission is simple: to deliver exceptional waste and recycling solutions to our customers and communities through a commitment to safety, service, the environment and the growth of our people. When you join Rumpke, you'll be part of a team providing essential services to millions of residents, businesses, and neighborhoods. You will enjoy competitive pay and comprehensive benefits, including health, dental, vision, matching 401(k), life insurance, paid vacation, and more. This is your opportunity to make a difference for you and your family. Come join our team! Welders are responsible for repairing containers, fleet vehicles, compactor repairs in shop atmosphere and assisting with compactor installations in the field, along with other weldable materials by applying appropriate techniques and using various welding devices. This includes fabricating, sanding, grinding, cutting, torching, drilling, welding and/or repair work on company containers, compactors, and placing of containers or compactor equipment. Level of responsibility an repair work may vary by location. Responsibilities of Position: Perform sanding, grinding, cutting, welding and other fabrication or repair work on company containers, compactors, and other equipment in a safe manner in compliance with all local, state, and federal regulations and company policies. Grinds metal parts after welding. Welds steel using MIG and ARC welding equipment. Fabricates steel components on containers. Cut steel using a plasma cutter, torch or nibbler. Perform related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts. Maintain a clean, safe work area in compliance with Company and OSHA standards. Completes required paperwork utilizing computer system. Utilizes standard shop hand tools, measuring devices, and equipment. Installs lids, wheels and lock setups on containers. Paints repaired and/or new containers. May assist in other projects or areas of the shop as needed. Maintain a positive work atmosphere by performing and communicating in a manner that promotes good relationships with customers, clients, coworkers, and management. Other duties as assigned. Skills & Abilities Needed for Position: Ability to perform physical requirements of the job (prolonged physical exertions, including standing, lifting, pushing, pulling, squatting, bending, kneeling, climbing, and working in awkward positions and tight areas). Excellent welding and mechanical aptitude. Knowledge of MIG/ARC and stick welding. Cutting torch skills; ability to use plasma cutter. Knowledge of small shop tools. Ability to operate a forklift safely. Additional Working Conditions/Aspects: Exposure to noise, heat, dust, and fumes as found in a repair or fabrication facility. Ability to work overtime, weekends and/or holidays. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish a contract for employment and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status or disability status

6:00AM-8:00PM F-M Rumpke is a family owned and operated company that ranks as one of the largest firms in the waste and recycling industry. Our mission is simple: to deliver exceptional waste and recycling solutions to our customers and communities through a commitment to safety, service, the environment and the growth of our people. When you join Rumpke, you'll be part of a team providing essential services to millions of residents, businesses, and neighborhoods. You will enjoy competitive pay and comprehensive benefits, including health, dental, vision, matching 401(k), life insurance, paid vacation, and more. This is your opportunity to make a difference for you and your family. Come join our team! Welders are responsible for repairing containers, fleet vehicles, compactor repairs in shop atmosphere and assisting with compactor installations in the field, along with other weldable materials by applying appropriate techniques and using various welding devices. This includes fabricating, sanding, grinding, cutting, torching, drilling, welding and/or repair work on company containers, compactors, and placing of containers or compactor equipment. Level of responsibility an repair work may vary by location. Responsibilities of Position: Perform sanding, grinding, cutting, welding and other fabrication or repair work on company containers, compactors, and other equipment in a safe manner in compliance with all local, state, and federal regulations and company policies. Grinds metal parts after welding. Welds steel using MIG and ARC welding equipment. Fabricates steel components on containers. Cut steel using a plasma cutter, torch or nibbler. Perform related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts. Maintain a clean, safe work area in compliance with Company and OSHA standards. Completes required paperwork utilizing computer system. Utilizes standard shop hand tools, measuring devices, and equipment. Installs lids, wheels and lock setups on containers. Paints repaired and/or new containers. May assist in other projects or areas of the shop as needed. Maintain a positive work atmosphere by performing and communicating in a manner that promotes good relationships with customers, clients, coworkers, and management. Other duties as assigned. Skills & Abilities Needed for Position: Ability to perform physical requirements of the job (prolonged physical exertions, including standing, lifting, pushing, pulling, squatting, bending, kneeling, climbing, and working in awkward positions and tight areas). Excellent welding and mechanical aptitude. Knowledge of MIG/ARC and stick welding. Cutting torch skills; ability to use plasma cutter. Knowledge of small shop tools. Ability to operate a forklift safely. Additional Working Conditions/Aspects: Exposure to noise, heat, dust, and fumes as found in a repair or fabrication facility. Ability to work overtime, weekends and/or holidays. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish a contract for employment and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status or disability status

Apply Description Johnson Welded Products is a part of the Tramec family, which has facilities located throughout the United States. Along with competitive pay and a bonus program, we offer medical & RX, dental, vision, company paid life insurance, company matching 401(k), paid vacations, 10 paid holiday's, gym credit, $500 referral bonus, $2,000 perfect attendance bonus, company paid uniforms, RX safety glasses program, work boot program, tuition reimbursement, internal training opportunities, plus much more! Summary: We are seeking a MIG/TIG Welder specializing in steel and aluminum welding to join our dynamic team. The ideal candidate will have a strong background in welding both materials, with a focus on high-quality craftsmanship, precision, and safety. You will be responsible for reading blueprints, preparing welding surfaces, and executing welding tasks with attention to detail. Your expertise will contribute to the fabrication, maintenance, and repair of metal components and structures. Duties: Perform MIG and TIG welding on steel and aluminum, ensuring strong, clean, and accurate welds. Read and interpret blueprints, technical drawings, and specifications to determine welding requirements. Set up and operate welding machines and equipment, including pre-weld preparations like cleaning and cutting metal surfaces. Inspect welded components to ensure they meet company and industry standards, identifying defects and making necessary adjustments. Maintain equipment, tools, and the working environment, ensuring everything is in optimal working condition. Collaborate with team members to complete projects on time and according to specifications. Adhere to safety protocols and standards, wearing the required personal protective equipment (PPE) at all times. Perform post-weld operations like grinding surfaces as needed. Assist in troubleshooting and problem-solving related to welding processes or quality control issues. May be assigned other duties by management within reason. Job Types: Full-time, Part-time Pay: $20.00+ per hour, based on experience Expected hours: 40 - 50 per week Shift: 1st and 2nd shift availability Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance On-the-job training Opportunities for advancement Paid time off Prescription drug insurance $500 Referral program Tuition reimbursement Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Overtime Supplemental pay types: Double time pay Overtime pay Johnson Welded Products is an Equal Opportunity Employer. We participate in E-Verify. All individuals, upon an offer of employment, will be required to submit to a drug screen. Our Drug Free Workplace program follows the Federal guidelines (marijuana or medical marijuana are not permitted).

Job Description Fabrication RTT Weld 1st Shift Rittal is a leading global provider of solutions for industrial enclosures, power distribution, climate control, and IT infrastructure, as well as software and services. The company is a member of the Friedhelm Loh Group, a successful international player with 18 production plants, 80 subsidiaries, and 12,000 employees. Primary Activities/Duties: Perform MIG welding to support the production schedule. Responsible for welding base frames. Perform work in a safe manner. Meet/exceed all targets for quality and productivity. Cohesively work with peers. Participate in weekly Rittal Production System meetings. Continuously improve your own skills and competencies. Drive 6S activities. All other duties as assigned. Knowledge & Experience: High School Diploma or GED strongly preferred. Minimum of 1 year of welding experience or completion of certified program related to welding training. Able to read blueprints is strongly preferred. Physical Requirements, Mental & Safety Requirements: Stand at the weld station throughout the work shift. Walk, bend, twist, and reach frequently throughout the work shift. Occasionally lift up to 50 pounds to waist level; frequently lift 25-40 pounds to waist level and up to 25 pounds above the shoulders. Work in a fast-paced environment, adapt to assignment changes easily, ability to multi-task. Wear safety-toed footwear, safety glasses with side shields, hearing protection, and additional personal protective equipment where required including welding hood, protective clothing, etc. Benefits staring the 1st of each month! If you require reasonable accommodation for any part of the application or hiring process due to a disability, you may contact the company's Human Resources Department at **************. This option is reserved for individuals who require accommodation due to a disability. Rittal LLC and Eplan are proud to be an affirmative action/equal opportunity employer. EEO, including Disability/Vets. Powered by JazzHR md GPOSPY4J

Twist Incorporated is looking for an experienced welder to join our dynamic team! Job Requirements: * Design Fixtures * Program Lincoln Welder * Basic welding skills * Tig * Mig * Ability to use measurement tools * Tape measure * Squaring Tools * Ability to read blueprints * Understands weld symbols * Ability to work off of ladders and on welding tables * Job may require some lifting, no more than 50 lbs A minimum of 4 years experience required. Job Category: Manufacturing Job Type: Full Time Job Location: 47 S. Limestone St Shift: 1st Apply for this position Twist, Inc. and Twist Aero are equal opportunity employers.

Salary - Per credit hour, based on course assignment Under the direct supervision of the Training Director, Welding, performs the following functions: Duties and Responsibilities PROVIDES INSTRUCTIONAL SERVICES: Assists with development of course outcomes and curriculum which are consistent with Academic Affairs, department, and technology / program goals; convey course outcomes and expectations to students according to college policy; organize and manage instructional activities; use appropriate learner-centered instructional methods; provide evaluation methods appropriate to stated outcomes; evaluate student learning in a fair manner; posts and maintains sufficient office hours compatible with student schedules; maintain accurate records of evaluation and course work including attendance; submit grades as required and on time; regularly seeks feedback on course delivery and student learning; participate in college evaluation system of instructional services; revise / update courses regularly, contribute to the assessment of student academic achievement; Work cooperatively with others to accomplish the goals of the department and technology; At all times maintains a safe working area and conditions. Qualifications - Education, Experience, and Skills Position Requirements Associate degree in area of study or related field required. Bachelor's Degree preferred. Degree must be from a regionally or nationally accredited institution recognized by the U.S. Department of Education or the Council for Higher Education Accreditation or equivalent as verified by a member of the National Association of Credential Evaluation Services, Inc. 5+ years of industry experience preferred. AWS Certified Welding Educator, or ability to obtain. Skills in: Reading, understanding, and use of technical drawings and blueprints. Strong organizational, record-keeping, and interpersonal skills. Excellent communication skills (written and verbal). Strong technology skills including usage of Microsoft Office, and Email. Experience with Blackboard LMS system preferred. Evidence of professional development in the field of concentration as demonstrated by activity in professional associations, consultative practice; participation in seminars, workshops, and formal coursework, and individual reading and research. Excellent communication skills (written and verbal). Strong technology skills including usage of email, student information system, and learning management system Organizational, record-keeping, and interpersonal skills. Knowledge of subject area. Knowledge of educational theory and application. Knowledge of learners and individual learning styles. Interest in and commitment to the learner-centered educational process. Educational technology skills. Confidentiality. Caring attitude toward students. Learning and self-motivation skills. Willingness to extend self to help students succeed. Knowledge of College resources available to students. Knowledge of organizational structure. Current knowledge of programs, objectives, and requirements. Openness to suggestions for improvement. Attention to detail. Flexibility in dealing with others. Ability to work as a team member. Ability to prioritize work. Behaves in accordance with Hocking College and Academic Affairs mission, goals, and values. Positive attitude. Knowledge of safe working conditions. Reasonable accommodations may be requested and reviewed according to the Americans with Disabilities Act (ADA).