Welder jobs in Baton Rouge, LA

Job Description CDR General Services is seeking an Aluminum Welder near Franklin, LA to perform high-quality aluminum welding for marine applications. This role requires advanced welding skills, attention to detail, and the ability to meet strict quality standards in all positions.Job Details Job Type: Full-Time Job Location: Franklin, LA Pay Rates: $29 to $33 per hour Schedule: Monday to Friday, 6:00 A.M. - 5:00 P.M. Potential Overtime: Weekdays and WeekendsKey Responsibilities Perform aluminum welding in all positions (uphill, overhead, horizontal, pipe, and flat). Read and interpret blueprints accurately. Tack weld, distribute heat evenly, and produce clean, high-quality welds. Pass MSB Pre-Employment Mock Weld Test and maintain compliance with company standards. Repair defective welds and ensure consistent quality. Operate power equipment safely and follow all safety protocols. Maintain strong attention to detail to support quality assurance requirements. Accurately measure materials using a tape measure. Collaborate effectively with team members and demonstrate strong communication skills. Pass required weld tests for seam welder and top seam welder pay, including: 3G-4G structure plate bend test. MSB 3G-4G groove test and 1G-2mm plate test per Metal Shark WPS. MSB 3G and 4G-4mm plate test per Metal Shark WPS. Provide consistent quality welds daily to maintain seam/top welder pay. Qualifications 3-5 years of experience in the ship/boat building industry welding aluminum. Ability to pass all required weld tests as outlined above. Excellent math skills and ability to read a tape measure accurately. Strong work ethic, communication skills, and ability to work well in a team. Physical ability to lift up to 50 lbs., stand, bend, stoop, squat, kneel, and climb stairs/ladders regularly.

More information about this job The Structural Welder will create frames for large structures. Most possess ability to set up equipment and weld either pipe, plate or structural steel using arc, gas-shielded arc or gas welding equipment. Must be able to produce quality work with reasonable efficiency. Will obtain certification as necessary. Must learn and understand all safety hazards related to the work and learn to safely and effectively use or operate work related tools and equipment. Will be required to work in a plant operations or construction jobsite setting. Responsibilities * The following are intended as general illustrations of the work in this job class and are not all-inclusive for this position. * Cut and drill structural metal pieces to size and place into position for welding * Ensure welds are well executed and meet safety and industry standards * Perform simple piping installations and repairs * Assist other mechanics/ craft worked as needed Qualifications Physical * Must be able to push/pull, lift, or carry up to 50 lbs., but may occasionally push/pull, lift, or carry up to 100 lbs. * Subject to repetitive use of hands/arms, and legs * Hand/eye coordination * Must be able to communicate (hear, comprehend, and speak) to safely perform work * Will need to be able to perform sedentary to heavy work * May operate hand and power tools (electric, gas, and pneumatic) of all types * Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds * Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis * Position may require prolonged bending/twisting, walking, crawling, kneeling, reaching overhead, squatting, pushing /pulling, or standing and lifting * Must be able to walk on uneven surfaces, muddy conditions, loose rock, loose/soft sand, etc. * May be required to work in confined spaces * Will be exposed to adverse weather conditions (Heat, Cold, Rain, Etc.) Mental * Must have the ability to communicate effectively with management/ supervision * Work at various tempos, and concentrate amid distractions * Decision making skills necessary * Detail-oriented; must be able to remember, examine, and observe details

Ecovyst is a materials science, catalyst, and services company dedicated to creating innovative technologies that play a critical role in supporting ecological health and help our customers solve complex challenges. Our cutting-edge solutions span across two industry-leading businesses, Ecoservices and Advanced Materials and Catalyst. Ecoservices is dedicated to services that have a positive impact on our planet. Our Ecoservices business provides specialty grade high purity virgin sulfuric acid for a number of diverse and growing end uses. Advanced Materials and Catalyst Technologies is a leading global innovator and producer of specialty catalysts and Zeolite, specializing in silica supports and catalysts. This business allows us to develop innovative technologies that enable our customers and value chain partners to create sustainable products. What we offer: Competitive pay Full benefit package 401k matching Tuition Reimbursement No sponsorships | No agencies Position Overview: We are seeking an experienced Pipefitter - Welder to join our Baton Rouge, LA plant. This is an individual contributor role responsible for welding of pipe (metallic and non-metallic) and plates using various methods, techniques, and weld procedures/specifications. What you will be doing: Weld metal parts together, using both stick rod and heli-arc welding techniques Perform related tasks, such as thermal cutting and grinding Preparation of material for welding Repair broken or cracked parts, fills holes, and increase size of metal parts. Installs modifications to equipment, or structures Position and clamp together components of fabricated metal products preparatory to welding Operate and utilize assistive devices such as man-lifts, forklifts, or other powered industrial equipment Pipefitting Proven ability to draw isometric diagrams and develop bill of material for piping system construction Drawing and reading blueprints/isometrics Fabrication and installation of piping systems Dismantle/remove and installation of bolted connections (flanges, pipe, vessels, etc.) Required Qualifications: 5 years welding in industrial field in a plant setting Certified Welding Inspection (CWI) or other welding certifications are desired High school diploma or general education degree (GED) Ability to qualify in all required methods in the 6G position Valid and current Transportation Workers Identification Card (TWIC) No sponsorships | No agencies Rolling 4/10

Ecovyst is a materials science, catalyst, and services company dedicated to creating innovative technologies that play a critical role in supporting ecological health and help our customers solve complex challenges. Our cutting-edge solutions span across two industry-leading businesses, Ecoservices and Advanced Materials and Catalyst. * Ecoservices is dedicated to services that have a positive impact on our planet. Our Ecoservices business provides specialty grade high purity virgin sulfuric acid for a number of diverse and growing end uses. * Advanced Materials and Catalyst Technologies is a leading global innovator and producer of specialty catalysts and Zeolite, specializing in silica supports and catalysts. This business allows us to develop innovative technologies that enable our customers and value chain partners to create sustainable products. What we offer: * Competitive pay * Full benefit package * 401k matching * Tuition Reimbursement No sponsorships | No agencies Position Overview: We are seeking an experienced Pipefitter - Welder to join our Baton Rouge, LA plant. This is an individual contributor role responsible for welding of pipe (metallic and non-metallic) and plates using various methods, techniques, and weld procedures/specifications. What you will be doing: * Weld metal parts together, using both stick rod and heli-arc welding techniques * Perform related tasks, such as thermal cutting and grinding * Preparation of material for welding * Repair broken or cracked parts, fills holes, and increase size of metal parts. Installs modifications to equipment, or structures * Position and clamp together components of fabricated metal products preparatory to welding * Operate and utilize assistive devices such as man-lifts, forklifts, or other powered industrial equipment * Pipefitting * Proven ability to draw isometric diagrams and develop bill of material for piping system construction * Drawing and reading blueprints/isometrics * Fabrication and installation of piping systems * Dismantle/remove and installation of bolted connections (flanges, pipe, vessels, etc.) Required Qualifications: * 5 years welding in industrial field in a plant setting * Certified Welding Inspection (CWI) or other welding certifications are desired * High school diploma or general education degree (GED) * Ability to qualify in all required methods in the 6G position * Valid and current Transportation Workers Identification Card (TWIC) No sponsorships | No agencies Rolling 4/10

For description, visit PDF: ************ metalsharkboats. com/wp-content/uploads/2024/01/Class-1-Welder-Jeanerette-for-posting. pdf

Job Description Role Title: 1st Class 6GR Welder Employment Type: Full Time Shift: Days Job Summary: We are seeking experienced 1st Class 6GR Welders for a Shipyard that does outside New Construction work in Thibodaux. Candidates must be willing to work 40 to 50 hours. All welders will have to pass a 6GR welders' test. Key Requirements Must Have ·Must pass a drug screen. ·Minimum 3 years of experience as a 6GR Welder. ·tools for welding Preferred Qualifications ·Experience with industrial or Fabrication shop Pipe welding. ·Strong knowledge of welding safety procedures. ·Proven reliability and consistent attendance. ·Experience working indoor and outdoor Pipe welding environment.

SUMMARY Tube - Capable of certifying on multi-process tubes being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. - May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. - May repair broken or cracked parts and fill holes. - May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. - May preheat work piece, using hand torch or heating furnace. - May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Job DescriptionJob Title: Class 1 Welder Job Type: Full-Time Pay Range: $24/hr + $100 per diem We are seeking experienced Class 1 Welders for full-time positions in Jeanerette, LA. This role involves welding aluminum in a ship/boat building environment. Candidates must be proficient in reading blueprints, welding in multiple positions, and adhering to safety and quality standards. Hours: Monday-Friday, 6:00 A.M. - 5:00 P.M. (40 hours per week) Potential for overtime on weekdays and weekends Education or Required Experience: 3 to 5 years of experience in the ship/boat building industry welding aluminum Must be able to read blueprints Must be able to tack, distribute heat evenly, and lay a clean bead Must be able to pass a Pre-Employment Mock Weld Test Required Skills: Strong attention to detail to support a high-quality assurance program Excellent math skills and ability to read a tape measure accurately Proficient in either fitting or welding aluminum Ability to repair defective welds Ability to weld in all positions (uphill, downhill, horizontal, pipe, or flat) Safe operation of power equipment in compliance with safety standards Strong work ethic Ability to operate power tools (grinders, saws, drills, etc.) Good communication skills and ability to work well in a team Physical Requirements: Must be able to lift up to 50 lbs Must be able to stand, bend, stoop, squat, or kneel regularly Must be able to climb stairs and ladders as needed to perform tasks Ameri-Force Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes:• Industry Leading Pay • Medical Coverage • Dental Coverage • Vision Coverage • Short Term Disability Benefits • Term Life Benefits • Referral Bonuses Referral Bonuses are available for specific jobs only About Ameri-Force Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker's compensation. In addition, we offer a comprehensive benefits package, including medical, dental, vision, short-term disability, and life insurance, tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Learn more at ameriforce.com Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law.

Qualifications: Have at least two or more years of experience preferred in welding. Ability to pass 6GR welding certification. Already have certification a plus. Experience with reading prints preferred. Essential Duties and Responsibilities: Promotes, executes and adheres to the company's safety program. Sets and operates welding machine for applicable welding processes (stick, short arc, flux core, tig, fill and cap, automatic, etc). Performs welding processes assigned for either structural, pipe, and/or automatic welding projects. Passes required welding test in accordance to AWS D1.1 latest edition. Maintains quality of welding that can pass NDT testing procedures. Performs welding assignments in a safe and efficient manner practicing safety at all times. Operates applicable hand tools (chipping hammers, grinders, etc). Operates high reaches or man lifts are requires when having to perform welding assignments above ground level. Follows instructions, written and/or verbal, with little or no supervision. Examines work pieces for defects and measures work pieces with straight edges or templates to ensure conformance with specifications. Performs other construction duties or task as required based on company's needs. You will receive an email to confirm your application is received. Sealevel Construction, Inc. is an at-will employer who fully supports and practices the principles of equal employment opportunity and strictly prohibits any form of unlawful discrimination. Sealevel Construction, Inc considers applicants for all positions without regard to race, color, religion, sex, national origin, age, disability status, veteran status, or any other legally protected status. ******************* Re-posted 6/15/2023, updated 9/4/2025, POSTED 09/11/2025, Reposted 12/8/2025

Welder/Fitter $1,480 WEEKLY Join SAVARD Personnel Group - where your skills are valued! Key Requirements: Must be able to fabricate, assemble, and repair components using both welding and fitting techniques Welding and fitting Heat Exchangers Perform Qc Duties Must be able to perform root passes tube sheets to shells Perform Heli Arc Welding, submerged Arc Welding, and manual Welding on components. Must correct welds as necessary Shifts: Monday -Friday 0700-3:30 PM Duration: Temp to Perm How to Apply: Apply & Receive offers NOW! Download Savard 24/7 App! Call us at ************ Job ID# 49750085

Job DescriptionWelder/Fitter $1,480 WEEKLY Join SAVARD Personnel Group - where your skills are valued! Key Requirements: Must be able to fabricate, assemble, and repair components using both welding and fitting techniques Welding and fitting Heat Exchangers Perform Qc Duties Must be able to perform root passes tube sheets to shells Perform Heli Arc Welding, submerged Arc Welding, and manual Welding on components. Must correct welds as necessary Shifts: Monday -Friday 0700-3:30 PM Duration: Temp to Perm How to Apply: Apply & Receive offers NOW! Download Savard 24/7 App! Call us at 504-883-7952 Job ID# 49750085

Job Description Now Hiring: 6G TIG GTAW Pipe Welders (Full-Time, No Per Diem) Unite Contracting is seeking experienced and highly skilled 6G TIG GTAW Pipe Welders to join our team in a full-time, permanent position in Norco, Louisiana. This is an opportunity to play a critical role in a growing company dedicated to excellence in fabrication and assembly. Please note that this position does not offer a per diem allowance. All candidates must complete a 6G TIG GTAW Pipe Weld Test and a Fluxcore Plate Weld Test 3G & 4G, as well as pass a drug screening and background check. Key Responsibilities: Perform high-quality TIG and Fluxcore welding on pipes and plates. Fabricate and assemble metal components to precise specifications. Install, maintain, and repair a variety of mechanical systems and equipment. Interpret blueprints, schematics, and technical drawings. Calculate and verify material dimensions and tolerances. Conduct inspections and tests to ensure weld integrity and compliance. Qualifications: Minimum of 2 years' experience with TIG and Fluxcore welding on 6G pipe Proven ability to pass a 6G TIG and Fluxcore 3G & 4G welding test Strong familiarity with welding equipment, techniques, and safety procedures Ability to read and interpret engineering drawings and blueprints Capable of lifting, bending, and performing physically demanding tasks Position Summary: As a Pipe Welder at Unite Contracting, you will be responsible for executing critical welding tasks in alignment with project specifications and safety standards. Reporting to the Lead Welder, your technical expertise and craftsmanship will directly contribute to the success of our operations in the construction and manufacturing sectors. Job Type: Full-Time Compensation: $30.00 - $32.00 per hour Expected Hours: 40-60 per week Benefits: 401(k) retirement plan Health, Dental, and Vision Insurance Paid Employee Referral Program Schedule Options: 8-hour shifts 10-hour shifts Day shifts We encourage qualified individuals from all backgrounds, including those with a criminal record, to apply. Work Location: In-person #hc185379

Now Hiring: 6G TIG GTAW Pipe Welders (Full-Time, No Per Diem) Unite Contracting is seeking experienced and highly skilled 6G TIG GTAW Pipe Welders to join our team in a full-time, permanent position in Norco, Louisiana. This is an opportunity to play a critical role in a growing company dedicated to excellence in fabrication and assembly. Please note that this position does not offer a per diem allowance. All candidates must complete a 6G TIG GTAW Pipe Weld Test and a Fluxcore Plate Weld Test 3G & 4G, as well as pass a drug screening and background check. Key Responsibilities: Perform high-quality TIG and Fluxcore welding on pipes and plates. Fabricate and assemble metal components to precise specifications. Install, maintain, and repair a variety of mechanical systems and equipment. Interpret blueprints, schematics, and technical drawings. Calculate and verify material dimensions and tolerances. Conduct inspections and tests to ensure weld integrity and compliance. Qualifications: Minimum of 2 years' experience with TIG and Fluxcore welding on 6G pipe Proven ability to pass a 6G TIG and Fluxcore 3G & 4G welding test Strong familiarity with welding equipment, techniques, and safety procedures Ability to read and interpret engineering drawings and blueprints Capable of lifting, bending, and performing physically demanding tasks Position Summary: As a Pipe Welder at Unite Contracting, you will be responsible for executing critical welding tasks in alignment with project specifications and safety standards. Reporting to the Lead Welder, your technical expertise and craftsmanship will directly contribute to the success of our operations in the construction and manufacturing sectors. Job Type: Full-Time Compensation: $30.00 - $32.00 per hour Expected Hours: 40-60 per week Benefits: 401(k) retirement plan Health, Dental, and Vision Insurance Paid Employee Referral Program Schedule Options: 8-hour shifts 10-hour shifts Day shifts We encourage qualified individuals from all backgrounds, including those with a criminal record, to apply. Work Location: In-person

←Back to all jobs at TREO STAFFING LLC MIG/Fluxcore Welders We are currently hiring Mig and Fluxcore welders for a fabrication yard in St. Bernard. Hours are Sunday - Thursday 11:00 pm - 8:00 am. This is a long term permanent position Please visit our careers page to see more job opportunities.

We are now accepting resumes/applications for EXPERIENCED Welder/Fitter for Vacherie, LA and surrounding areas. Duties/Responsibilities may/may not be limited to the following: Job Scope: Welding and Fitting as needed Duration of Job: Temp to Hire Based on Job Performance Position Requirements: MUST have experience with FLUXCORE & 6GR MUST HAVE VALID LICENSE AND CLEAN MVR Technical school education is a plus, but high school diploma or GED is required. Must be able to pass physical Must be able to pass drug screen Must be able to pass background check Required Skills: Must have Flux Core welding and fabricating experience Must be able to weld in various positions Must be able to read and understand blueprint drawings. Excellent math skills with ability to efficiently read a tape measure Excellent problem solving skills Excellent communication skills Demonstrate strong work ethic Demonstrate consistency in quality of work Duties/Responsibilities: Physical Requirements: May layout and mark weld points on parts or subassemblies using ruler, square, scribe or templates Positions pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools Clamps, holds, tack-welds, grinds, and bolts components to position for welding. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications. Operates cutting equipment including torches and various power and hand tools Remove rough spots from workpieces, using portable grinders, hand files, or scrapers. Safely operates iron worker, grinders, overhead cranes, rigging, pipe threading machine, welding machine, and various pneumatic hand tools Assembly of components with some fabrication of equipment needed for the job with minimal supervision Mange housekeeping activities when requested. Maintain the work area clean, safe and organized. Assist in waste disposal and recycling activities Cleanup work area and equipment after work is completed. Execute daily work instructions received from Supervisor in a timely manner. Work effectively to meet or exceed productivity goals while maintaining high quality standards. Practice safety procedures in accordance with training and guidelines when working. Comply with company policies and legal guidelines, helping to maintain a safe and orderly work environment Meet quality and performance requirements as outlined by quality assurance and production standards Report safety hazards, quality, and production issues to management immediately Must be able to lift up to 50 LBS Must be able to stand, bend, stoop, squat, or kneel regularly, as well as climb stairs and ladders to complete tasks. Ability to work outdoors in harsh weather conditions Ability to work in varying hot and cold environments Ability to work in an environment with exposures to dust, dirt and various other debris, metal and paint fumes, gases While performing the duties of this job, the employee is regularly exposed to high, precarious places and outside weather conditions The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock Documents Required: Driver's License/Identification Card Social Security Card/Birth Certificate Must be able to pass a drug test. Must have reliable transportation Must have own welding shield and PPE (hard hat, steel toes, gloves, & safety glasses.) Pay: Depends on Experience Weekly Pay Pay Schedule: Monday - Sunday Schedule: Monday - Friday (Weekends as needed) 10-12 Hour Days (with weather permitting) Tasks beyond those listed above will be asked of you, so a positive, can-do attitude is required. Qualified candidates can submit a resume, apply on http://ejob.bz/ATS/jb.do?req GK=27089666&portal GK=14432

Job Description CDR General Services is seeking a Aluminum TIG Welder near Franklin, LA specializing in 6G Stainless and Aluminum welding to join our team. This role involves precision welding for ship and boat building projects, requiring strong technical skills, attention to detail, and adherence to safety and quality standards.Job Details Job Type: Full-Time Job Location: Franklin, LA Pay Rate: $29 to $33 per hour Schedule: Monday to Friday, 6:00 A.M. - 5:00 P.M. (40-48 hours/week) Potential Overtime: Weekdays and WeekendsKey Responsibilities Perform TIG welding on stainless steel and aluminum components for marine applications. Read and interpret blueprints accurately. Tack weld, distribute heat evenly, and produce clean, high-quality weld beads. Pass MSB Pre-Employment Mock Weld Test and maintain compliance with company standards. Weld in all positions and repair defective welds as needed. Operate power equipment safely and follow all safety protocols. Maintain strong attention to detail to support quality assurance requirements. Accurately measure materials using a tape measure. Collaborate effectively with team members and communicate clearly. Qualifications 3-5 years of experience in ship/boat building industry welding aluminum. Ability to pass 6G pipe test in stainless steel and aluminum. Ability to pass 4G plate test on 3mm and 4mm plate bend test. Proficient in welding aluminum and stainless steel. Strong work ethic, communication skills, and ability to work well in a team. Physical ability to lift up to 50 lbs., stand, bend, stoop, squat, kneel, and climb stairs/ladders regularly.

SUMMARY Tube - Capable of certifying on multi-process tubes being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. - May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. - May repair broken or cracked parts and fill holes. - May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. - May preheat work piece, using hand torch or heating furnace. - May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS - Work within precise limits or standards of accuracy. - Make decisions based on measurable criteria. - Apply basic mathematics to solve problems. - Plan work and select proper tools. - Visualize objects in three dimensions from plans and drawings. - Compare and see differences in the size, shape and form of lines, figures and objects. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Job DescriptionJoin Our Team as a Stainless Steel TIG Pipe Welder! We are currently seeking a skilled Stainless Steel TIG Pipe Welder to join our team at Unite Contracting Solutions in Norco, LA. As a Stainless Steel TIG Pipe Welder, you will play a crucial role in our projects by ensuring that all stainless steel piping is welded to the highest standards of quality and precision. Responsibilities: Perform TIG welding on stainless steel pipes according to project specifications Read and interpret blueprints and welding symbols Inspect welded joints to ensure they meet quality standards Collaborate with team members to complete projects promptly Maintain a clean and organized work environment Qualifications: Proven experience as a Stainless Steel TIG Pipe Welder Certification in TIG welding is preferred Ability to work efficiently both independently and as part of a team Strong attention to detail and precision Good verbal and written communication skills If you are a skilled Stainless Steel TIG Pipe Welder looking for a rewarding career with a company that values quality and teamwork, we want to hear from you! Join us at Unite Contracting Solutions and take on exciting challenges as we strive for excellence in every project we undertake. About Us Unite Contracting Solutions is a leading provider of industrial construction and maintenance services in the Gulf Coast region. With a focus on safety, quality, and integrity, we have built a strong reputation for delivering exceptional results for our clients. Our team of skilled professionals collaborates to tackle complex projects and consistently exceeds client expectations. At Unite Contracting Solutions, we are committed to excellence in everything we do. #hc201902

Join Our Team as a Stainless Steel TIG Pipe Welder! We are currently seeking a skilled Stainless Steel TIG Pipe Welder to join our team at Unite Contracting Solutions in Norco, LA. As a Stainless Steel TIG Pipe Welder, you will play a crucial role in our projects by ensuring that all stainless steel piping is welded to the highest standards of quality and precision. Responsibilities: Perform TIG welding on stainless steel pipes according to project specifications Read and interpret blueprints and welding symbols Inspect welded joints to ensure they meet quality standards Collaborate with team members to complete projects promptly Maintain a clean and organized work environment Qualifications: Proven experience as a Stainless Steel TIG Pipe Welder Certification in TIG welding is preferred Ability to work efficiently both independently and as part of a team Strong attention to detail and precision Good verbal and written communication skills If you are a skilled Stainless Steel TIG Pipe Welder looking for a rewarding career with a company that values quality and teamwork, we want to hear from you! Join us at Unite Contracting Solutions and take on exciting challenges as we strive for excellence in every project we undertake. About Us Unite Contracting Solutions is a leading provider of industrial construction and maintenance services in the Gulf Coast region. With a focus on safety, quality, and integrity, we have built a strong reputation for delivering exceptional results for our clients. Our team of skilled professionals collaborates to tackle complex projects and consistently exceeds client expectations. At Unite Contracting Solutions, we are committed to excellence in everything we do.