Welder jobs in Boise, ID - 179 jobs

Primary Job Function This bonus eligible position performs all kinds of welding, brazing and cutting using gas and electric welding equipment, set-up, organization and performance of all welding jobs. operates on Swing Shift (2:15pm-10:45pm), Monday through Friday Essential Duties and Responsibilities Reviews instructions, prints and travelers for the job Plans details of working procedure and tools and material requirements, fabricates equipment by cutting, burning and welding various metals. Repairs equipment by using welding techniques and appropriate welding equipment, cleans and prepares surfaces to be welded, sets up, assembles and tacks weld parts, builds up worn or defective surfaces. Keeps equipment and work area clean and orderly Performs periodic preventive maintenance Follows established safety protocols including required usage of PPE; helps to maintain a safe working environment. Performs other duties as assigned Qualifications Minimum Qualifications and Experience Minimum skills, knowledge, education, certifications and related job experience that employee typically must have to perform essential functions of the job acceptably. Minimum 2 years TIG welding experience, including aluminum and stainless Proficient at blueprint reading Understanding of weld symbols and preparation of material Knowledge of fixture development and use; ability to store and track fixtures Requires expert knowledge regarding physical properties and welding characteristics of metal, effects of heat, welding shrinkage, welding techniques and allowances for thickness. Ability to produce sound, functional welds that are free of defects Must be able to utilize all required PPE Dependability; honesty & integrity; a positive, proactive attitude; ability to use time productively, working with minimal supervision. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: (a) stand (up to 8 hours per shift), (b) walk, (c) use hands to touch, (d) reach with hands and arms, (e) climb or balance, (f) stoop, (g) kneel, crouch, or crawl, and (h) and talk or hear. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. May be exposed to noise, dust, fumes, airborne particles, smoke and temperature extremes within OSHA Permissible Exposure Levels. Pay and Benefits Our pay ranges are guided by the discipline, level, and experience required. Within the range, individual pay may vary based on various factors, including desired skills/ technical competency, relevant experience, transferrable skills, and advanced education/ training. Benefits include Medical, Dental, Vision, Life, AD&D, LTD, EAP, Paid Time Off, 401(k) with Employer Contribution, Paid Holidays, as well as a Quarterly + Annual Bonus program. Signing Bonus To welcome you to our team and show our commitment to your success, we are offering a signing bonus of $500.00! This bonus will be awarded in two installments, 50% upon successful completion of probationary period and the balance paid upon completion of one year of service with IMC. About IMC Integrated Metal Components, Inc. (IMC) was founded in 1995 with the mission to deliver high-quality, on-time products while building lasting partnerships with our customers. We combine cutting-edge precision equipment with a team of highly trained employees to ensure our customers receive the best possible products. Through collaboration, innovation, and an unwavering commitment to excellence, IMC aims to be a trusted, single-source solution for all sheet metal manufacturing needs. At IMC, our business is built on eight key principles: Quality On-Time Delivery Exceptional Customer Service Integrity Developing Partnerships Competitive Pricing Consistent Performance Ongoing Improvement Additional Information Integrated Metal Components, Inc. (IMC) is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace and do not discriminate against any employee or applicant based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable law. IMC complies with all federal, state, and local laws regarding nondiscrimination in employment. We encourage candidates of all backgrounds to apply. Integrated Metal Components, Inc. (IMC) participates in E-Verify to confirm the employment eligibility of all newly hired employees. For more information about E-Verify, please visit *****************

**Contract Aluminum Welder** **Pay:** $30 per hour + $150 per diem (7 days/week) We are hiring Aluminum Welders for the Maneuver Support Vessel (MSV) project, which involves building 32 vessels over the next 10 years. This is a 2-year contract with per diem included. These vessels are being constructed for the U.S. Army and will transport military vehicles. Weld testing will take place in Vancouver, WA. **Responsibilities** + Perform aluminum welding and fabrication in multiple positions. + Read and interpret blueprints; follow precise welding specifications. + Execute MIG welding (required) and pulse arc welding (preferred). + Work on large-scale aluminum components both in and out of position. **Qualifications** + Minimum 2 years of aluminum welding experience (MIG or TIG). + Ability to describe prior experience and successfully pass a weld test. + Pulse arc experience and multi-position welding preferred. **Environment & Shift** + Work in a clean, modern shop specializing in aluminum fabrication. + Projects include government structures: bridges, dams, nuclear sites, boats, and barges. + Day Shift: Monday-Thursday, 5:00 AM - 3:30 PM. **Why Join Us?** + Long-term opportunity with a stable company. + 10 years of guaranteed work on a major government project. + Ideal for candidates seeking job security and career growth. **Weld Test Details** + Uphill beads in 3G and 4G positions using MIG (3/64" wire) to D1.2 standard (pulse arc). + Weld 5" aluminum plates (3/8" thick) with V-groove and open back. + Visual inspection and break test to failure. **Ready to start a rewarding career? Apply today!** For immediate questions, contact: Chris Abdallah ************* **Job Type & Location** This is a Contract to Hire position based out of Vancouver, WA. **Pay and Benefits** The pay range for this position is $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Vancouver,WA. **Job Type & Location** This is a Contract to Hire position based out of Boise, ID. **Pay and Benefits** The pay range for this position is $28.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Boise,ID. **Application Deadline** This position is anticipated to close on Jan 24, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Your Next Opportunity is Here - Urgently Hiring Welder Fabricators in Eugene, Oregon! Job Title: Welder Fabricator Pay: $20.00 - $25.00+ per hour, DOE Hours: Monday - Friday, 7:00 AM - 3:30 PM What You'll Do: As a Welder Fabricator, you will be responsible for: Performing MIG welding using .045 wire to create strong, precise connections. Welding and fabricating structural steel components to meet production standards. Cutting metal parts with shears and Parana equipment for accurate dimensions. Operating torches and plasma cutters to achieve desired metal shapes. Fabricating full-size catch basins to specifications. Welding grates using various techniques, including tack and spot welding. Following established safety standards and maintaining a clean work area. Utilizing personal tools, including a welding hood (required for welders). Learning additional fabrication tasks as training is provided to expand your skill set. What You'll Bring: The ideal candidate for this role will have: At least 2 years of welding/fabrication experience, with specific expertise in MIG welding. Experience working with structural steel components. Strong measurement and blueprint-reading skills for accurate fabrication. Physical capability to lift up to 50 lbs and perform tasks that involve bending, stooping, and twisting. A reliable work ethic and a willingness to learn additional fabrication skills. Why Join Us in Eugene? Full-time, stable opportunity with a long-standing local steel manufacturer. Consistent weekday schedule with no weekend work, providing a perfect work-life balance. Hands-on fabrication environment with opportunities to expand your skills professionally. Ask us about our Referral Bonus Program to earn extra cash! Location & Schedule: This position is on-site in Eugene, Oregon, with a full-time schedule of Monday-Friday, 7:00 AM - 3:30 PM. Ready to Take the Next Step? If you're ready to grow your career as a Welder Fabricator in Eugene, apply today or contact our recruiting team to learn more. Don't wait - we're hiring now! #STEUG

$1,500 SIGN ON BONUS AVAILABLE WELDER / FABRICATOR Who We Are: Founded in 2006, Johnson Thermal Systems (JTS) is the largest and leading provider of Power Packaging, Power Distribution Centers and Industrial Refrigeration Units. Located in Caldwell ID, our 107,000 sq ft facility is built on 11 acres and houses our 200+ employees. At JTS, we are proud to have a 'work focused' culture that demands the very best of our staff. As a company, we are committed to ongoing training and education to ensure, every job we complete is right the first time. Our 'On Time" ethic is what makes our clients return, project after project. Why You Are Needed: As a Welder you will be responsible for fabricating stainless steel metal products in the construction and assembly of Power Packaging Units. What You Will Receive in Return: Competitive Salary 120 hours of PTO 9 Paid Holidays Health/Dental/Vision Insurance Corporate Health Club Membership with CRUNCH FITNESS 401k with 2% match What You Will Need To Succeed: Must have at least 2 years experience in a manufacturing or construction environment, preferably using hand and power tools. Operating Press Break/Shear a plus. Sets up and operates specialized equipment and tooling for fabrication of stainless sheet metal products Assembles, lifts, positions and removes work pieces from machinery Prepares metal for fabrication, welding, painting or shipping Understands and adheres to established safety and quality procedures Maintains a clean work area which includes equipment kept in safe operating condition Performs all tasks to ISO standards and requirements Break down top level drawings. Program parts. Build prototypes units Layout blank sizes. Calculate circumference. Determine best use of material. Load and run programs. Calculate bend radius. Blueprint reading. Reading and applying decimal chart. Using dial calipers and other inspection gauges. Die handling and safety. Install, align, and lock/flip specified punches, dies, or other fixtures in rams or bed of brake press, using hand tools. Clean and lubricate machines. Load and unload material as needed using a forklift. Knowledge of machines and tools, including their uses. Knowledge of materials, methods, and the tools involved in the fabrication of sheet metal structures Ability to interpret blue-prints and drawings. Mathematical skills such as adding, subtracting, multiplying, dividing, fractions and using a tape measure. Ability to effectively interact and communicate with individuals at all organizational levels. Ability to conduct self in a respectful and appropriate manner. Ability to safely perform tasks and produce a quality product in an efficient and productive manner to meet schedule. Ability to reason and apply principles of logic to a wide range of factors when monitoring and working on jobs. Being reliable, responsible and dependable Ability to work independently without constant supervision. JOIN OUR GROWING TEAM TODAY! ##ZR

JAG Industrial & Marine Services is hiring Journeymen Level Marine Structural Welders JAG Industrial & Marine Services is hiring Journeymen Level Marine Structural Welders from cities across America for projects located at shipyards across the United States. Travel is required for all positions. JAG Industrial & Marine Services is hiring journeymen level Marine Structural Welders for shipyards located throughout the U.S. JAG offers our welders a competitive pay structure, with per diem available for qualified applicants and the potential to gross approximately $1,650.00 and above per week. Marine Structural Welders-Fitters must have trade specific work experiencing the physically demanding marine/industrial environment and meet the position requirements listed below in the Position Description/Requirements. Must be U.S. Citizen or National with clean background for a minimum 10 years and able to pass 10 panel drug screen. Immediate openings, short & long term assignments. POSITION DESCRIPTION/REQUIREMENTS Marine Structural Welders - Steel; must be proficient in the FCAW welding processes, must be able to set up your basic machine to weld in horizontal 2G, vertical up 3G, and overhead 4G positions with either .045 or .052 wire. · Heating - Oxygen/Fuel Heating Torch. · Experience working in a physically demanding environment (shipboard, sub-assemblies, ladders, staging, etc.). · Familiarity with OSHA regulations relative to the shipbuilding industry. · Air Carbon Arc Gouging · Ability to properly use fillet and butt weld gauges. · Structural Welders will be required to pass all Welder Qualification Tests prior to reporting for the first day of work. These tests will be in accordance with MIL-STD-248D inspected to 2035 Class 1. o ABS=2G, 3G,4G On 1" plate with metal backing strip, bend test Physical Requirements This position requires working in inside and/or outside environmental conditions, shipyard and/or remote locations, teams in opens spaces, heights above 6 feet, and/or alone in confined spaces. Tasks require repetitive sequences that include balancing, climbing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, finger manipulation, grasping, feeling, seeing, hearing, speaking, an acute sense of smell and exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects and/or lift objects. Protective clothing, hearing and eye protection, hard hats, safety shoes or boots (steel), and respiratory protection shall be worn accordingly.

Job DescriptionDescription: ECS Composites is seeking a skilled Welder with a primary focus on aluminum welding to join our precision-driven manufacturing team. The ideal candidate will be detail-oriented, safety-conscious, and experienced in producing clean, high-quality welds that meet exacting standards. As a key contributor, you'll help deliver rugged, reliable products trusted across military, aerospace, and technical sectors. Key Responsibilities: Perform STICK and TIG welding on aluminum components, with occasional work on other metals. Interpret and work from blueprints, technical drawings, and written specifications. Ensure all welded assemblies meet ECS quality, structural integrity, and appearance standards. Conduct in-process and post-weld quality inspections. Maintain welding equipment in safe and efficient operating condition. Collaborate with cross-functional teams to resolve fabrication or assembly challenges. Follow all company safety protocols and maintain a clean, organized workspace. Perform additional fabrication, assembly, or shop support tasks as needed to meet production goals and departmental needs. Requirements: High school diploma or equivalent required. Minimum 2 years of welding experience, preferably with aluminum. STICK and/or TIG welding certification preferred but not required. Proficiency in reading and interpreting technical documents and blueprints. Strong focus on precision, consistency, and safety. Ability to work independently or in a team-oriented environment. Physically capable of standing for long periods, lifting to 50 lbs., and performing repetitive tasks. Benefits: Competitive pay Comprehensive health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for advancement within a well-established, family-owned company Join ECS Composites and bring your welding expertise to a team committed to American manufacturing excellence. Your craftsmanship helps shape products that perform in the field-no matter the mission. ECS Composites is an equal opportunity employer. We value diversity and encourage applicants from all backgrounds.

For over two decades Interstate has been an industry leader in the manufacturing and sales of cargo trailers. Established in 1995, our goal is to build quality trailers that meet our customers' personal and commercial needs. Whether it's hauling a vehicle for play (car, atv, snowmobile, motorcycle, etc), or transporting heavy duty equipment or material between sites, Interstate has the right trailer for the job and we need you to help deliver the demand by joining our production team in the Welding Department. The Welder will support our valued customers and their production team by contributing to the high quality construction process of Interstate Trailers. This will include: Welding raw materials in one of five phases or “cells” designed to construct the exceptional framework for our high quality and durable trailers. Interpreting complex build orders to prepare and construct standard and custom trailers to appropriate specifications. This may involve capably handling related power tools such as a grinder, chop saw, Oxygen and Acetylene torch and other general hand tools. After training, this role will demonstrate a consistently safe, efficient and accurate work environment. All finished work production will consistently meet high quality control standards. This role is expected to learn and become proficient in other production roles in order to support the entire production team as needed. Why you'll love working for Interstate / TrailersPlus: A dynamic team environment with a 4 day work schedule that allows you more personal time. Generous Wage: Capable welders in Nampa can earn over $20 per hour with our group rate incentives. Paid training with internal growth opportunities. You will also share in our success with a generous bonus of 2% yearly earnings Great benefits: medical, dental and 401K. 2 weeks off during the Christmas Holidays! Employee discounts on TrailersPlus merchandise. The ideal candidate: Enthusiastic - Motivated to show up, work hard and get it done right. Professional attitude and appearance. Uncompromising attention to consistent and exceptional results. Some welding experience preferred, will train for our process. Mechanical ability- working with power tools and yard vehicles. Team mindset - Will seek to help out, learn and improve wherever needed to help the business. Has an interest in promoting within our organization. We are a growing Company and we believe in growing our employees. We partner with our employees through training, coaching, promotion or other opportunities to assure their full potential and success. If you are hard working, committed to doing it right and always getting better, this could be the start of a very successful career.

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

Yellowstone Local is proud to represent Western Utility Telecom, an industry leader in custom steel fabrication for communication towers and utility structures. If you're a skilled welder with a sharp eye for detail and pride in precision craftsmanship, this is your chance to join a team that builds America's infrastructure, literally. What's in it for You? Pay Range: $22.00 - $32.00 per hour Schedule: Day and weekend shift available; weekend shift differential applicable Employment Type: Full-time Comprehensive Benefits: 401(k) with company match Health, dental, and vision insurance Flexible spending account (FSA) Life insurance Paid time off Parental leave Employee Assistance Program (EAP) Retirement plan Why You'll Love It Here High-impact work: You'll fabricate components used in real-world infrastructure projects. Precision-driven culture: If you value doing things right the first time, you'll fit right in. Supportive leadership: Clear direction, consistent supervision, and a team that's got your back. Growth-ready shop: Whether you're looking to grow your welding skills or move up in leadership, this company has the framework to support you. Hands-on environment: Perfect for tradespeople who want to work with their hands and see the results of a hard day's work. Your New Role As a Welder/Fitter in Salem, OR, you'll be responsible for fabricating, welding, and assembling structural steel components for utility and communication projects. You'll work with round and tapered shafts, using GMAW and other welding methods. Your day will include reading blueprints, cutting and fitting material, inspecting for quality, and maintaining a clean and safe shop environment. Daily Responsibilities: Interpret detailed drawings and specifications Cut, fit, and weld steel using GMAW spray transfer and other processes Conduct plasma and oxy/fuel cutting Fabricate specialized fixtures and components Maintain high standards for safety, quality, and accuracy Perform equipment maintenance and assist in shop operations as needed Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. High school diploma or GED preferred Minimum 3 years of experience in both welding and fabrication, ideally in a production or manufacturing environment Proficient in: GMAW spray transfer Structural layout and fabrication tools AWS D1.1 Visual Acceptance Criteria Using layout tools and fabrication equipment Reading and interpreting engineering drawings Basic and advanced math, including geometry FCAW welding for select project applications Strong organizational and communication skills Ability to lift up to 50 lbs, stand for long periods, and work in variable shop conditions Must complete an on-site welding/skills test as part of the hiring process Western Utility Telecom is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #orange

Madden Industrial Craftsmen is seeking a fluxcore MIG Welder for a role with steel and metal shop in the Northeast, Portland area. In this role you should be comfortable working independently and with a variety of metals including but not limited to stainless steel, steel and aluminum. Pay: $23.00-$26.00HR Shifts open: Monday-Friday 7:00am - 3:30pm OR Monday - Friday 2:00pm - 10:30pm Welder Responsibilities: Utilize fluxcore MIG on mild steel to weld as required by the manufacturing process. Operate shop equipment including: angle grinder, bench grinder, manual vertical band saw, shear, brake, punch presses, iron workers, cold saw, manual milling machine, table saw and others as directed. Willingness to provide support in other areas of the manufacturing process if needed. Read and fabricate from prints. Welder Qualifications: 1+ year of fluxcore MIG welding on mild steel. Understanding of welding blueprints. Ability to operate relevant shop equipment. Ability to work well within a team. Ability to occasionally lift up to 100lbs Benefits: Medical Paid Sick Leave 401(K) w/match

The Welder position is responsible for accurately reading and interpreting blueprints, drawings, and specifications to meet project requirements. This role involves fabricating large fuel tanks-up to 60 feet long and 13 feet wide-designed to hold 3,000 to 10,000 gallons of diesel fuel. The welder must ensure strict adherence to safety standards by wearing required PPE and following all safety guidelines throughout the process. Accountabilities: Read and interpret blueprints, drawings, and specifications to determine welding requirements. Prepare materials by cleaning, cutting, and positioning components for welding. Set up, operate, and maintain welding equipment and tools. Weld components using manual or semi-automatic equipment in multiple positions. Inspect welds to ensure compliance with specifications and quality standards. Complete quality checklists at each stage of the process. Work with various metals, including steel, aluminum, and stainless steel. Prepare surfaces by removing slag, rust, grease, and scale prior to welding. Maintain a safe and clean work environment by following all safety protocols and wearing required PPE. Report hazards, near misses, and unsafe conditions promptly. Collaborate with team members and supervisors to meet production goals. Perform other duties as assigned to support welding and fabrication operations. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Attributes Safety First: Adheres to all safety protocols and promotes a hazard-free workplace. Have Humanity: Works respectfully and collaboratively with team members. Be Transparent: Communicates clearly about progress, challenges, and safety concerns. Drive Innovation: Suggests improvements to welding processes and tools for efficiency. Be Resilient: Adapts to changing priorities and production demands with a positive attitude. Always Reliable: Consistently delivers accurate, high-quality work. Grit: Handles physically demanding tasks with persistence and pride in craftsmanship. Required Knowledge/Experience: High school diploma or equivalent required; welding certification preferred. 2+ years of welding experience, preferably in manufacturing or heavy equipment. Experience with 7024 welding rods and .045 wire MIG preferred. Ability to read and interpret blueprints and engineering drawings. Familiarity with welding machinery, electrical equipment, and manual tools. Strong mechanical aptitude and attention to detail. Knowledge of jobsite safety regulations and PPE requirements. Reliable, responsible, and respectful team player. Must pass a background check and drug screening. Work Environment and Physical Demands Manufacturing environment with exposure to indoor and outdoor conditions. Ability to stand, kneel, stoop, or crouch for 8-10 hours per day. Frequent use of hands for handling tools and components. Must be able to lift up to 50 lbs and push/pull up to 100 lbs (following OSHA standards). Visual and auditory ability to navigate safely and communicate effectively. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Job DescriptionNW Employment Solutions is partnered with a Metal Components Company in Tualatin and we are looking to add a TIG Welder to join our team. Shift: 6am-2:30pmPay: $18-28 DOE Primary Job FunctionPerforms all kinds of welding, brazing and cutting using gas and electric welding equipment, set-up, organization and performance of all welding jobs.Essential Duties and Responsibilities Reviews instructions, prints and travelers for the job Plans details of working procedure and tools and material requirements, fabricates equipment by cutting, burning and welding various metals. Repairs equipment by using welding techniques and appropriate welding equipment, cleans and prepares surfaces to be welded, sets up, assembles and tacks weld parts, builds up worn or defective surfaces. Keeps equipment and work area clean and orderly Performs periodic preventive maintenance Follows established safety protocols including required usage of PPE; helps to maintain a safe working environment. Performs other duties as assigned Minimum Qualifications and ExperienceMinimum skills, knowledge, education, certifications and related job experience that employee typically must have to perform essential functions of the job acceptably. Minimum 2 years TIG welding experience, including aluminum and stainless Proficient at blueprint reading Understanding of weld symbols and preparation of material Knowledge of fixture development and use; ability to store and track fixtures Requires expert knowledge regarding physical properties and welding characteristics of metal, effects of heat, welding shrinkage, welding techniques and allowances for thickness. Ability to produce sound, functional welds that are free of defects Must be able to utilize all required PPE Dependability; honesty & integrity; a positive, proactive attitude; ability to use time productively, working with minimal supervision. Physical RequirementsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: (a) stand (up to 8 hours per shift), (b) walk, (c) use hands to touch, (d) reach with hands and arms, (e) climb or balance, (f) stoop, (g) kneel, crouch, or crawl, and (h) and talk or hear. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. May be exposed to noise, dust, fumes, airborne particles, smoke and temperature extremes within OSHA Permissible Exposure Levels. If you or someone you know is interested in this position call/text "TIG" to Erin @ ************

Venture Dynamics is actively seeking Marine Structural Welders. This position will perform Welding duties in all stages of repair and modernization of Vessels at the Vigor Shipyard in Portland Oregon. PAY IS $30.00/HR, and $150 PER DIEM PER DAY FOR QUALIFIED TRAVELERS. Job starts ASAP and goes until the end of February. DAY AND SWING SHIFTS AVAILABLE. Position Overview: Join us in supporting the Puget Sound Naval Shipyard in Washington state with your experience and expertise! This role requires a proactive and detail-oriented professional to engage in Structural Welder tasks, ensuring excellence in every aspect of the job. Key Requirements: Completion of Marine OSHA 10 training is mandatory. Citizenship- U.S Citizen with proof (Enhanced Driver License/ID or Real ID along with Birth Certificate or U.S Passport). Must be able to obtain a "DBIDS" Badge. Certifications- Maritime OSHA 10 certification. Experience- Previous shipyard experience required. Working Hours- 40-70 hours per week. Scheduling: Diverse shifts including 8-hour, 10-hour, and 12-hour shifts. Monday through Friday with overtime, and weekends as requested by client. Job Description: Venture Dynamics is seeking a skilled Structural Welder to join our team, specializing in NAVSEA welding projects within shipyards. The ideal candidate will possess expertise in MIG, Stick, and Fluxcore welding techniques to fabricate and assemble metal structures according to NAVSEA standards. Experience in Shipfitting is a significant plus. Key Responsibilities: - Perform high-quality structural welding using MIG, Stick, and Flux Core techniques in accordance with NAVSEA standards. - Fabricate and assemble metal structures and components in shipyard environments. - Read and interpret weld symbols, blueprints, schematics, and job specifications. - Ensure all welding tasks meet or exceed quality control standards and are ready for inspection. - Work collaboratively with other team members to ensure project specifications and deadlines are met. - Conduct inspections of completed welds to ensure structural integrity and adherence to safety protocols. Qualifications: - Proven experience in MIG, Stick, and Fluxcore welding techniques. - Ability to pass NAVSEA welding certification tests. - Strong ability to work from blueprints, schematics, and specifications. - Knowledge of safety practices and procedures in shipyard environments. Additional Skills (Preferred): - Experience in Shipfitting is highly advantageous. - Familiarity with welding inspection and quality assurance is beneficial. Physical Demands: The position is active and requires extensive standing, walking, bending, kneeling, stooping, crawling, climbing, and crouching. Reasonable accommodations may be made for individuals with disabilities to perform the essential functions. EEO Statement: Venture Dynamics/Sound Resource Group is an Equal Opportunity Employer. We are committed to fostering a diverse and inclusive workplace and treat all employees and applicants equally. Embrace the opportunity to grow your career within the shipyard industry, contributing to meaningful projects in a dynamic work environment. Apply your skills where it's needed most! View all jobs at this company

About Peninsula Iron Works: Peninsula Iron Works is a leading industrial repair and fabrication company serving the Northwest since 1917. We specialize in large equipment repair, custom fabrication, heavy machining, and mechanical rebuilds for a wide variety of industries including mining, aggregate, power generation, and construction. Position Summary: We are seeking a skilled and dependable Fitter/Welder to join our fabrication team. This position is responsible for accurately fitting and welding complex fabrications and assemblies based on blueprints and technical drawings. The ideal candidate will have experience in heavy industrial welding and fabrication work and a commitment to safety, quality, and craftsmanship. Key Responsibilities * Ensure all safety procedures are followed, and the proper PPE is in place * Interpret blueprints, weld symbols, and procedures * Use grinders, torches, saws and other fabrication tools to prepare parts for fit-up * Tack weld assemblies and measure to ensure dimensional accuracy * Final weld parts in all postures and positions. * Perform First Article Inspections. * Troubleshoot and resolve problems with fit up as they occur Qualifications * Must have knowledge in rigging and crane safety * Minimum of 5 years' experience with Mig, Tig, and Oxy-Fuel torch * Must have strong attention to detail * Familiarity and skill with interpreting technical drawings and blueprints * Ability to work independently and closely follow directions is essential * Must have a positive and professional attitude * Available to work weekends and overtime * Capable of standing for extended periods of time * Non-ferrous welding experience is a plus EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR aecj TWnYyp

TIG Welder I Reports To: Welding Supervisor FLSA Status: Non-Exempt Can you make the AGC Difference? AGC Heat Transfer, Inc. is looking for a dynamic manufacturing TIG Welder to join our second shift team in our Fairview, OR facility who understands the importance of quality work done efficiently with a team-first mindset. Brief Company Description AGC Heat Transfer, Inc., a wholly owned subsidiary of Alfa Laval, AB, is the leading OEM of sanitary plate heat exchangers in North America, manufacturing plate heat exchangers specifically designed for sanitary applications. AGC offers complete heat exchangers, services as well as upgrades to plate packs, gaskets and spares that fit multiple brands. In addition, AGC offers Field Leak Testing and inspections of plate heat exchangers that meet the 3-A sanitary standard. AGC Heat Transfer consists of three manufacturing/service facilities (Bristow, VA, Fairview, OR & Pleasant Prairie, WI) with about 110 employees (70 OR / 20 VA / 20 other locations). Currently, most of the sales are in the US & Canada. AGC Heat Transfer has a strong engineering culture with a heavy emphasis on customer service and technical/consultative sales. Wage $23.00 - $25.00/hour 10% hourly shift differential upon moving to second shift schedule, training to be completed on Day Shift. Job Description As a TIG Welder I, the employee will perform a wide range of tasks. Some of the responsibilities include, but are not limited to: Position Responsibilities Fit, tack, assemble and weld stainless sheet metal on simple plate exchanger components per drawings. Sand welds per drawings. Material handling (forklift, pallet jack) Safely use small tools and equipment to complete daily tasks. Complete all assigned tasks in a timely and efficient manner. Keep work areas clean. Actively participate in continuous safety and production improvement efforts. Other duties as assigned. Key Competencies High Integrity with a commitment to honesty, trust and transparency. Displays Care embracing the highest standards to ensure resource efficiency for the well-being of team members and responsibility to the environment. Innovative and curious promoting diversity of thought while understanding the needs of the customer leveraging cutting-edge technology utilizing state-of-the-art processes. Committed to Excellence through perseverance, GRIT and a focus on continuous improvement consistently delivering quality equipment, parts and service of unmatched value. Execution while focusing on quality, safety and Teamwork delivering results motivated by a diverse and inclusive culture based on accountability, customer/employee satisfaction, creative solutions, and constant communication. Goal oriented driving to positive results. Skills & Qualifications 1+ year previous TIG welding experience required. Stainless steel preferred. All candidates required to pass welding test. Comfortable welding small plate heat exchanger components. High School Diploma or GED Basic addition and subtraction/Reading and writing skills. Able to read tape measure in fractions of an inch. Read and follow drawings. Ability to follow directions and focus on completing tasks. Must be willing to work on a wide range of tasks and flexible to changing priorities. Wear all appropriate PPE. Ability to follow safety rules and the 5s principles of a work environment. Ability to do repetitive work including walking and lifting for extended periods of time. Capable of lifting 50 lbs. Job Type Full Time, Non-Exempt Position will work with first shift for three (3) months before transition to second shift schedule Wage $23.00 - $25.00/hour 10% hourly shift differential upon working on second shift schedule Benefits Health Insurance with Health Savings Account (if eligible) Dental/Vision Insurance Life/Disability Insurance 401(k) with employer match Paid Vacation/Sick Time Paid Holidays Employee Assistance Program Wellness Program EQUAL OPPORTUNITY EMPLOYER

Legacy Talent Search is currently seeking candidates for a Structural Welder role in Gresham, OR. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest Our quality products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their manufacturing process. Key Responsibilities: · Perform MIG, TIG, and Stick welding on a variety of structural steel components in accordance with blueprints, welding symbols, and project specifications. · Fit, align, and assemble metal parts to precise tolerances using jigs, fixtures, and measuring instruments. · Inspect completed welds for strength, appearance, and compliance with standards and tolerances. · Operate and maintain welding and cutting equipment to ensure safe and efficient performance. · Work from detailed fabrication drawings to ensure accurate dimensions and assembly. · Follow all company safety policies, including the proper use of PPE, lockout/tagout procedures, and safe material handling. · Collaborate with fabrication, assembly, and quality control teams to meet project deadlines and maintain consistent production flow. · Maintain a clean and organized work area to support a safe and efficient environment. Qualifications: · High school diploma or equivalent required; completion of a certified welding program preferred. · Minimum of 2 years' experience in structural steel welding or fabrication. · Proficient in MIG, TIG, and Stick welding processes. · Ability to read and interpret blueprints, weld symbols, and fabrication drawings. · Familiarity with AWS D1.1 or similar welding codes preferred. · Strong attention to detail and commitment to producing high-quality welds. · Ability to lift up to 50+ lbs and stand for extended periods in a fast-paced shop environment. · Reliable, safety-conscious, and able to work both independently and as part of a team. What We Offer: · Competitive hourly wage based on experience and certifications. · Comprehensive benefits package, including health insurance and paid time off. · Opportunities for skill advancement, certification upgrades, and leadership development. · A team-oriented environment that values precision, integrity, and pride in craftsmanship. · The opportunity to join a respected company known for its excellence in steel fabrication and construction. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life-one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

ENTEK is synonymous with some of the world's best lead-acid separators, lithium-ion separators, extruders, and engineering services for the battery and extrusion markets. We operate on six continents; astronomical growth for the simple lead-acid battery separator company James Young and Pete Johnson founded in Lebanon, OR in 1984. Our intimate knowledge of both the design and manufacturing of separators spurred the introduction of our high-speed co-rotating twin-screw E-Max extruder in 1998-recognized as the fastest to install and easiest to operate extruder on the market. In 2001, our first lithium-ion battery separator line expanded our reach in Asian markets, delivering a quality product at a market-leading price. Our success here is fueled by consistently living our core values of respect, integrity, commitment, and innovation. From state-of-the-art separators and extruders, to 360° engineering and support for all of it, ENTEK's commitment to non-stop innovation and attention to customer service keeps production lines humming. We are set up to make sure that a world at work has what it needs to stay at work, 24-7. Job Description SUMMARY The primary function of this position is for lays out, fits and welds fabricated components to assembly structures forms, such as machinery frames, tanks, and parts according to prints and knowledge of welding metallurgy. Selects equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal shrinkage and welding techniques. May operate other equipment such as overhead crane, forklift, high lift, crane truck. PRIMARY DUTIES AND RESPONSIBILITIES may include all or some of the following. Other duties may be assigned as needed. Welding and fabrication of 316L SS tanks QualificationsAt least five years experience in welding and fabrication environment. Welding and fabrication of Tank building is a plus. TIG, MIG & Stick Welding skills preferred. Additional Information Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: Ability to comprehend and apply principles of advanced algebra, trigonometry. Ability to work with concepts such as limits, engineering equations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to talk or hear. We are an Equal Opportunity Employer. M/F/Disabled/Veteran