Welder jobs in Brownsville, TX - 34 jobs

1. Must possess the necessary skill sets to pass the pre-employment welding examination. 2. Applies technical knowledge and practical welding skills. 3. Assist in component installation, fit-up and alignment. 4. Must be familiar with the equipment required to perform Shielded Metal Arc Welding (SMAW) or Gas Tungsten Arc Welding (GTAW) processes. 5. Verifies position of metal components in assembly, using straight edge, combination square, calipers, and rule. 6. Utilize conventional tools for preparation of welding and clean up. (Grinders, buffers, file, chipping hammer, etc.). 7. Tack-weld components to secure in position for welding. 8. Must be familiar with weld acceptance criteria and perform front line examination of the welding work performed. 9. Adheres to all safety procedures. **Auto req ID:** 24424BR **Required Skills:** they will need to pass SMAW and FCAW Ni weld test RT QUALIFIED P11A-F(CVN)(NiCrMo3T1-4) P11A-A(CVN)(NiCrMo-3) P1-F (BHN) P1-A-LH (structural) **Project Name:** Rio Grande LNG **Location:** Brownsville, Texas **Shift:** Night Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

Labor One is hiring 1st Class Structural Welders for a shipyard in Port St. Joe, FL. Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 / (251)385-0491/ (956)382-2631 / (281)965-2749 *Please send us a text if we don't answer* Visit us at 20005 State Highway 48 Brownsville, TX 78521 POSITION SUMMARY Lay out, fit, and weld fabricated cast, and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, and building and bridge parts according to specifications. Select equipment and plans layout, assembly, and welding. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of customers, the essential duties and responsibilities may be different than described. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Monitor the working environment for compliance with quality, safety, environmental, and health regulations. -Weld components in the flat, horizontal, vertical, and overhead positions. -Fit, tack, and weld component parts in position, and examine welds for adherence to specifications. -Examine weld for bead size and other specifications. -Inspect grooves, angles, or gap allowances, using a micrometer, caliper, and precision measuring instruments. -Lay out, position, align, and secure parts and assemble them according to specifications. -Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Must have carbon air arc cutting experience with butt seams, preparation of seams after gouge, and removal of any structure when needed with the carbon air arc technique. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description This is an excellent opportunity to use your experience in the welding and skilled trades fields to teach others seeking education and training. No previous teaching experience required but must be a certified or licensed Welder and experienced (see below requirements) JOB SUMMARY Instructors are responsible for teaching students in our training programs in classroom and hands-on lab settings, ensuring that they gain the knowledge and skills that are required for entry-level employment in their chosen field. Instructors are also responsible for sound educational practices and the academic development of each student. Instructors will also manage their classroom environment and promote a positive and engaging learning experience, provide support, tutoring and other assistance as needed. Instructors are to “model" the professional behaviors, language, and activities expected of our students. ESSENTIAL FUNCTIONS Utilize classroom and lab instruction, student assessment mechanisms, and classroom management techniques to provide an engaged classroom experience to students. Ensure that each student has been presented with the material to successfully meet the learning objectives of each course within a student's program of study Ensure that instructional materials and equipment are ready for student use, sufficient in quantity, are properly maintained and are in working order prior to class time Participate in ongoing faculty assessment and professional development activities to ensure an active and engaged classroom experience for all students; maintain required certification and license Actively participate in meetings, review and analyze assessment data, compile reports, and meet academic and administrative deadlines Ensure campus compliance with all federal, state, and regulatory bodies' guidelines, along with internal policies of the company Other duties as assigned MINIMUM REQUIREMENTS High school diploma, GED, and/or proof of completion of related vocational training program. Verifiable work experience including a minimum of five years verifiable welding industry experience within the last ten years Must be certified or licensed where required by law Strong written, oral, and interpersonal communication skills with demonstrated success in collaborating with diverse groups of employees and customers Demonstration of highest levels of integrity and professionalism in all aspects, including appearance, demeanor, and attitude Ability to work in an observation/coaching style environment Capability to prioritize, accept responsibility, and work within deadlines Superior organizational and problem-resolution skills Demonstrated commitment to customer service Solid computer software skills including Microsoft Office PREFERRED QUALIFICATIONS Previous experience teaching in an education setting and/or experience with training employees within the industry Demonstrate knowledge of federal, state, and accreditation regulations applicable to the proprietary education industry Ancora Education is committed to creating a diverse and inclusive work environment. We are an equal opportunity employer that maintains a policy of nondiscrimination with respect to all employees and applicants for employment. All employment decisions are made without regard to individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law.

Temp Local Manufacturing Warehouse looking to hire Operators to perform the following: Aligning material and putting together parts to build more complex units; Ability to work independently or cross-functional teams; Performing initial troubleshooting on equipment and processes; Record and complete accurate documentation according to GMP requirements; Complete documentation and dispose of rejected and or excess material on a daily basis; Ensures all product is packaged per packaging specifications and routings are followed; Demonstrate skills in attention to detail and accuracy; Lift up to 50 pounds when necessary; Manufacture bags utilizing Standard Operating Procedures (SOP) in accordance with product blueprint; Operating and monitoring manufacturing equipment and processes using computerized and manual systems;

Job Description No teaching experience required, we will provide all necessary tools and training to succeed!! We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; Modifies instructional methods and strategies to meet diverse students' needs; Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements Minimum of 3 years of industry experience preferred; Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; Certified AWS and/or NCCER. Benefits Training & Development Fun & Energetic, Family-Based Environment Continuous Growth Opportunities Medical, Dental, & Vision Options Health Savings & Flexible Spending Options (HSA & FSA) Basic Life & Accident Insurance Short & Long-term Disability 401K Retirement Plan SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

No teaching experience required, we will provide all necessary tools and training to succeed!! Full and part-time available We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities * Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; * Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; * Modifies instructional methods and strategies to meet diverse students' needs; * Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; * Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements * Minimum of 3 years of industry experience preferred; * Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; * Certified AWS and/or NCCER. Benefits * Training & Development * Fun & Energetic, Family-Based Environment * Continuous Growth Opportunities * Medical, Dental, & Vision Options * Health Savings & Flexible Spending Options (HSA & FSA) * Basic Life & Accident Insurance * Short & Long-term Disability * 401K Retirement Plan * SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Job ID: R0117571 Company Name: HITACHI ENERGY USA INC Profession (Job Category): Production & Skilled Trades Job Schedule: Full time Remote: No Job Description: About the Role: Hitachi Energy in Alamo, TN is seeking to hire a Fabricator to join our team. This position will work with the maintenance department to troubleshoot equipment malfunctions and modify equipment as assigned to support a continuous improvement culture. How You Will Make A Difference: Position, align, fit, and weld parts to form complete units, following blueprints and layout specifications, and using jigs, welding torches, and hand tools Design and construct templates and fixtures, using the required tools Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes Proficient in Math and can accurately read measuring devices Familiar with schematic reading, electrical, pneumatics, and general building Ability to work independently Knowledge in welding, (GMAW, SMAW, GTAW, FCAW) Knowledge in braze welding Maintains a safe and clean working environment by complying with procedures, rules, and regulations Dexterity and hand-eye coordination, including ability to grasp, manipulate and assemble parts and components that are often very small, and/or heavy Your Background: Associates or technical degree in welding or related field and 1 year of experience Equal Employment Opportunity (EEO)-Females/Minorities/Protected Veterans/Individuals with Disabilities Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Job DescriptionDescription: The Fitter is responsible for fitting piping and/or structural components as per supplied drawings or field-verified dimensions while adhering to Acadian or customer welding procedure requirements. This role demands efficient, productive work, clear communication with assigned helpers and welders, and a professional approach to work relationships. The Fitter is ultimately accountable for the quality of their workmanship and productivity. Key Responsibilities Perform material take-offs on drawings to determine required cut lengths. Operate pipe/beam cutting machines or, when unavailable, use beveling machines to cut pipe to the necessary length. Coordinate with the Shop Foreman to assign personnel or issue a cut list if needed. Communicate effectively with helpers to ensure the appropriate materials and equipment are prepared for each project task. Bolt, clamp, and tack-weld parts securely in position for welding. Verify that all materials (pipes, structural components, fittings) match the drawing specifications, including size, rating, grade, project number, and phase. Report any discrepancies to the Shop Foreman. Confirm all measurements, ensuring square and level components before releasing them to the welder. Record pre-weld dimensions on fitter drawings for accuracy and quality control. Transfer heat numbers to drawings and cut sheets upon completion and submit to the Shop Foreman. Ensure all fabricated items are tagged with the correct job number, customer name, and piece number for identification. Transfer heat numbers and job numbers to all material drop-offs and coordinate with the Shop Foreman for inventory or storage movement. Maintain punctual attendance and adhere to the work schedule consistently. Conduct daily inspections of all equipment, including torches, torch hoses, grinders, levels, tapes, etc., to ensure proper function and safety. Keep the work area clean and safe by sweeping and maintaining a tidy environment as needed. Complete and discuss a thorough Job Safety and Environmental Analysis (JSEA) before each task. Maintain a positive attitude towards customer service and represent ACI professionally at all times. Qualifications and Experience Preferably a minimum of 3 years of experience in piping, vessel, and packaged equipment fabrication. Key Competencies Strong understanding of material take-offs, pipe and beam cutting procedures, and equipment utilization. Attention to detail and adherence to project and drawing specifications. Effective communication and leadership skills to guide helpers and ensure project success. Commitment to safety, punctuality, and maintaining a clean work environment. HSE Responsibilities Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” - Vision & Mission Statement as fundamental core values. Demonstrate visible leadership and support proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture. Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, safe work practices, and client-specific regulatory requirements. Make a personal commitment and be accountable for HSE results, driving toward the achievement of defined goals. Clearly communicate these goals through direct reports, while coaching, mentoring, and empowering others to achieve desired outcomes. Conduct periodic quality assessments of HSE processes to enhance personal coaching and mentoring effectiveness and demonstrate ownership in the successful implementation of HSE programs. Requirements:

Improving America's infrastructure isn't for the weak. It takes grit, determination, and hard work to execute high impact projects. Michels Corporation engages 8,000 people and 18,000 pieces of heavy equipment in our insatiable drive to be the best. Our work improves lives. Find out how a career as an Assistant Welder can change yours. As an Assistant Welder, your key responsibility will be to assist welders/fabricators by performing job setup and basic finishing work. This position will perform grinding, operate brake and/or sheer machine, and perform saw cuts. Why Michels? * We are consistently ranked among the top 10% of Engineering News-Record's Top 400 Contractors * Our steady, strategic growth revolves around a commitment to quality * We are family owned and operated * We invest an average of $5,000 per employee on training each year * We reward hard work and dedication with limitless opportunities * We believe it is everyone's responsibility to promote safety, regardless of job titles * We offer a comprehensive benefits program, including Health, Dental, Life, Flexible Spending Accounts, Health Savings Account, Short Term and Long Term Disability Insurance, 401 (k) plan, Legal Plan, and Identity Theft and Monitoring Plan. Depending on your position and location you may participate in a different benefit plan. Why you? * You thrive in fast-paced environments under tight deadlines * You relish new challenges and evolving technology * You enjoy collaborating and communicating with your teammates * You like to know your efforts are noticed and appreciated * You have a strong attention to detail What it takes: * Completed weld school, 0-2 years of experience or equivalent combination * Basic computer proficiency (desired) * Experience operating brake and/or sheer machine (desired) AA/EOE/M/W/Vet/Disability ***************************************************

1. Must possess the necessary skill sets to pass the pre-employment welding examination. 2. Applies technical knowledge and practical welding skills. 3. Assist in component installation, fit-up and alignment. 4. Must be familiar with the equipment required to perform Shielded Metal Arc Welding (SMAW) or Gas Tungsten Arc Welding (GTAW) processes. 5. Verifies position of metal components in assembly, using straight edge, combination square, calipers, and rule. 6. Utilize conventional tools for preparation of welding and clean up. (Grinders, buffers, file, chipping hammer, etc.). 7. Tack-weld components to secure in position for welding. 8. Must be familiar with weld acceptance criteria and perform front line examination of the welding work performed. 9. Adheres to all safety procedures. **Auto req ID:** 24423BR **Required Skills:** they will need to pass SMAW and FCAW Ni weld test RT QUALIFIED P11A-F(CVN)(NiCrMo3T1-4) P11A-A(CVN)(NiCrMo-3) P1-F (BHN) P1-A-LH (structural) **Project Name:** Rio Grande LNG **Location:** Brownsville, Texas **Shift:** Night Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

Labor One has immediate openings for Structural Welders in Brownsville, TX. Job Details: Must know how to weld 3g / 4g fluxcore and back gouge. Pre-testing Monday-Friday Please contact our recruiting team if you're interested. Labor One 20005 State Highway 48 Brownsville, TX 78521 Cell: (956)382-2631 or (281)965-2749 *Please send us a text if we do not answer*

This is an excellent opportunity to use your experience in the welding and skilled trades fields to teach others seeking education and training. No previous teaching experience required but must be a certified or licensed Welder and experienced (see below requirements) JOB SUMMARY Instructors are responsible for teaching students in our training programs in classroom and hands-on lab settings, ensuring that they gain the knowledge and skills that are required for entry-level employment in their chosen field. Instructors are also responsible for sound educational practices and the academic development of each student. Instructors will also manage their classroom environment and promote a positive and engaging learning experience, provide support, tutoring and other assistance as needed. Instructors are to “model" the professional behaviors, language, and activities expected of our students. ESSENTIAL FUNCTIONS Utilize classroom and lab instruction, student assessment mechanisms, and classroom management techniques to provide an engaged classroom experience to students. Ensure that each student has been presented with the material to successfully meet the learning objectives of each course within a student's program of study Ensure that instructional materials and equipment are ready for student use, sufficient in quantity, are properly maintained and are in working order prior to class time Participate in ongoing faculty assessment and professional development activities to ensure an active and engaged classroom experience for all students; maintain required certification and license Actively participate in meetings, review and analyze assessment data, compile reports, and meet academic and administrative deadlines Ensure campus compliance with all federal, state, and regulatory bodies' guidelines, along with internal policies of the company Other duties as assigned MINIMUM REQUIREMENTS High school diploma, GED, and/or proof of completion of related vocational training program. Verifiable work experience including a minimum of five years verifiable welding industry experience within the last ten years Must be certified or licensed where required by law Strong written, oral, and interpersonal communication skills with demonstrated success in collaborating with diverse groups of employees and customers Demonstration of highest levels of integrity and professionalism in all aspects, including appearance, demeanor, and attitude Ability to work in an observation/coaching style environment Capability to prioritize, accept responsibility, and work within deadlines Superior organizational and problem-resolution skills Demonstrated commitment to customer service Solid computer software skills including Microsoft Office PREFERRED QUALIFICATIONS Previous experience teaching in an education setting and/or experience with training employees within the industry Demonstrate knowledge of federal, state, and accreditation regulations applicable to the proprietary education industry Ancora Education is committed to creating a diverse and inclusive work environment. We are an equal opportunity employer that maintains a policy of nondiscrimination with respect to all employees and applicants for employment. All employment decisions are made without regard to individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law.

Job Description No teaching experience required, we will provide all necessary tools and training to succeed!! Full and part-time available We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; Modifies instructional methods and strategies to meet diverse students' needs; Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements Minimum of 3 years of industry experience preferred; Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; Certified AWS and/or NCCER. Benefits Training & Development Fun & Energetic, Family-Based Environment Continuous Growth Opportunities Medical, Dental, & Vision Options Health Savings & Flexible Spending Options (HSA & FSA) Basic Life & Accident Insurance Short & Long-term Disability 401K Retirement Plan SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

The Fitter is responsible for fitting piping and/or structural components as per supplied drawings or field-verified dimensions while adhering to Acadian or customer welding procedure requirements. This role demands efficient, productive work, clear communication with assigned helpers and welders, and a professional approach to work relationships. The Fitter is ultimately accountable for the quality of their workmanship and productivity. Key Responsibilities Perform material take-offs on drawings to determine required cut lengths. Operate pipe/beam cutting machines or, when unavailable, use beveling machines to cut pipe to the necessary length. Coordinate with the Shop Foreman to assign personnel or issue a cut list if needed. Communicate effectively with helpers to ensure the appropriate materials and equipment are prepared for each project task. Bolt, clamp, and tack-weld parts securely in position for welding. Verify that all materials (pipes, structural components, fittings) match the drawing specifications, including size, rating, grade, project number, and phase. Report any discrepancies to the Shop Foreman. Confirm all measurements, ensuring square and level components before releasing them to the welder. Record pre-weld dimensions on fitter drawings for accuracy and quality control. Transfer heat numbers to drawings and cut sheets upon completion and submit to the Shop Foreman. Ensure all fabricated items are tagged with the correct job number, customer name, and piece number for identification. Transfer heat numbers and job numbers to all material drop-offs and coordinate with the Shop Foreman for inventory or storage movement. Maintain punctual attendance and adhere to the work schedule consistently. Conduct daily inspections of all equipment, including torches, torch hoses, grinders, levels, tapes, etc., to ensure proper function and safety. Keep the work area clean and safe by sweeping and maintaining a tidy environment as needed. Complete and discuss a thorough Job Safety and Environmental Analysis (JSEA) before each task. Maintain a positive attitude towards customer service and represent ACI professionally at all times. Qualifications and Experience Preferably a minimum of 3 years of experience in piping, vessel, and packaged equipment fabrication. Key Competencies Strong understanding of material take-offs, pipe and beam cutting procedures, and equipment utilization. Attention to detail and adherence to project and drawing specifications. Effective communication and leadership skills to guide helpers and ensure project success. Commitment to safety, punctuality, and maintaining a clean work environment. HSE Responsibilities Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” - Vision & Mission Statement as fundamental core values. Demonstrate visible leadership and support proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture. Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, safe work practices, and client-specific regulatory requirements. Make a personal commitment and be accountable for HSE results, driving toward the achievement of defined goals. Clearly communicate these goals through direct reports, while coaching, mentoring, and empowering others to achieve desired outcomes. Conduct periodic quality assessments of HSE processes to enhance personal coaching and mentoring effectiveness and demonstrate ownership in the successful implementation of HSE programs.

Job DescriptionLabor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard. $160 perdiem, if eligible. Job Requirements: Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Pipe Welding Assessment: FCAW Fillet weld plates: · 2F 3F 4F (VT test) *Fillet testing shall take 1-2 hours Steel backing butt joint 6X6 3/8” thick: · 2G 3G 4G (VT and UT test ) *All Butt joint testing takes a welder an average of 1-2 days Butt joint with ceramic backing 12X8 ¾” thick: · 1G 2G 3G (VT and UT test) *All Butt joint testing takes a welder an average of 1-2 days Simulation: · Wraps 2F 3F 36” in length · Diagonal 3F 4F 36” in length · In and out corners 2F 4F 6” · Water tight collar · Air arc fillet welds (VT testing) *All simulation testing takes average welder 1-2 days GTAW Pipe welding assessment · 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test) · 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test) · 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test) *All pipe testing takes average welder 1-2 days Send resume to ehinojosa@laboronetx.com

1. Must possess the necessary skill sets to pass the pre-employment welding examination. 2. Applies technical knowledge and practical welding skills. 3. Assist in component installation, fit-up and alignment. 4. Must be familiar with the equipment required to perform Shielded Metal Arc Welding (SMAW) or Gas Tungsten Arc Welding (GTAW) processes. 5. Verifies position of metal components in assembly, using straight edge, combination square, calipers, and rule. 6. Utilize conventional tools for preparation of welding and clean up. (Grinders, buffers, file, chipping hammer, etc.). 7. Tack-weld components to secure in position for welding. 8. Must be familiar with weld acceptance criteria and perform front line examination of the welding work performed. 9. Adheres to all safety procedures. **Auto req ID:** 24611BR **Project Name:** Rio Grande LNG **Location:** Brownsville, Texas **Shift:** Day Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (956)382-2631 / (281)965-2749 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

1. Must possess the necessary skill sets to pass the pre-employment welding examination. 2. Applies technical knowledge and practical welding skills. 3. Assist in component installation, fit-up and alignment. 4. Must be familiar with the equipment required to perform Shielded Metal Arc Welding (SMAW) or Gas Tungsten Arc Welding (GTAW) processes. 5. Verifies position of metal components in assembly, using straight edge, combination square, calipers, and rule. 6. Utilize conventional tools for preparation of welding and clean up. (Grinders, buffers, file, chipping hammer, etc.). 7. Tack-weld components to secure in position for welding. 8. Must be familiar with weld acceptance criteria and perform front line examination of the welding work performed. 9. Adheres to all safety procedures.

Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard. $160 perdiem, if eligible. Job Requirements: Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Pipe Welding Assessment: FCAW Fillet weld plates: · 2F 3F 4F (VT test) *Fillet testing shall take 1-2 hours Steel backing butt joint 6X6 3/8” thick: · 2G 3G 4G (VT and UT test ) *All Butt joint testing takes a welder an average of 1-2 days Butt joint with ceramic backing 12X8 ¾” thick: · 1G 2G 3G (VT and UT test) *All Butt joint testing takes a welder an average of 1-2 days Simulation: · Wraps 2F 3F 36” in length · Diagonal 3F 4F 36” in length · In and out corners 2F 4F 6” · Water tight collar · Air arc fillet welds (VT testing) *All simulation testing takes average welder 1-2 days GTAW Pipe welding assessment · 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test) · 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test) · 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test) *All pipe testing takes average welder 1-2 days Send resume to ehinojosa@laboronetx.com