Welder jobs in Chula Vista, CA - 133 jobs

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents • Company paid Dental and Vision • 401(k) with company match • Short-term and Long-term disability - Company paid • Life Insurance and AD&D - Company paid • Voluntary Spouse and Child Life Insurance • Paid time off with company holiday • Tuition Reimbursement • Employee Assistance Program (EAP) *Benefit eligibility is set forth in benefit plan documents and organization policies. Description Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials. Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer) Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed; May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools; Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials. Maintain certification in the welding procedure(s) as required by Quality Assurance Manager. Fill out Objective Quality Evidence (OQE) forms Follow Quality Assurance welding procedures Performs all work in accordance with established safety procedures. Participates in special projects as required. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: Typically requires 1+ years related experience. High School Diploma or GED, plus technical/vocational training or the equivalent combination. Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred. Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures. Skill to make complete penetration and complete fusion welds. Read and understand blueprints and specifications. Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: General Hand Tools Welding Machines Precision Measuring Instruments Pneumatic and Electric Hand Tools Knowledge, Skills and Other Abilities: Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals. Must possess working knowledge of welding procedures and tools. Knowledge of welding shrinkage, welding techniques and physical properties of metal. Ability to qualify using welding procedures on plate and/or pipe. Must be able to pass Workmanship Inspection training. Must be able to read and understand material safety data sheets (MDS). Able to follow safety procedures. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $21.83 - $38.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-25-00010 This position is currently accepting applications.

General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. We offer an excellent benefits package including A competitive salary Medical, dental, vision, life, and disability insurance Paid-time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Pay range: $36.00 - $54.00 Education and Experience: High School Diploma or GED A minimum of five to six years of applicable welding experience ASNT NDT Level III Certification or relevant experiencepreferred. One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other preferred. Skills and Proficiencies: Read and interpret specifications Read and understand shipboard installation drawings, blueprints, and job orders Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc. Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment Weld parts together using gas welding, or brazing and any combination of arc welding processes Perform thermal cutting and grinding Repair broken or cracked parts, fill holes, and increase size of metal parts Supervisory and leadership skills Safety and Physical Requirements: (have or obtain the following certifications) Occupation Safety Haz-Mat Certification Shipyard Competent Person Certification Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification Working in Confined Spaces Certification Training and the Ability to Safely Lift and Move Objects of 50 LBS Security and Work Locations: Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA You will work at government facilities. You must be a US Citizenship eligible for clearance. You must pass a background investigation You must have a valid driver's license This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy. Other Responsibilities: Work overtime upon management request Maintain and safeguard company equipment and tools Maintain and safeguard welding inventory Organize and schedule welding jobs to an on-time completion Physical Requirements: Lifts at least 100 pounds at one time and 60 pounds for an extended period of time. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.

Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques. Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD. Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings. Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools. Experience and Skills Requirements: Must possess a high school, trade or vocational school degree. 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment. Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred. Must have or have the ability to obtain a SECRET clearance. Must have the ability to obtain base access and security credentials. Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Travel may be required within and outside of the continental United States. Due to export control regulations, this role is open to U.S. citizens only. Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at *********************** or follow us on our LinkedIn page at ********************************************************** To be considered you must apply by going to ***********************.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health • Dental • Vision • Life • LTD • Accident • Critical Illness • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent PAY RANGE: $25 - $35 per hour (DOE) Job Overview Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education High school graduate, or GED Responsibilities Ensure work is done safely and meets quality standards Set up welding machines based on the job at hand or using a Welding Procedure Specification Must have own basic skill related tools and equipment if not supplied by the workplace Weld steel, aluminum and stainless steel components based on the required weld processes and parameters Adhere to the specific welding procedure specifications Set up welding cells for serial production runs Keep work areas clean and organized and take proper care of all equipment and facilities Follow all company rules and policies Provide a great level of attention to detail and focus on the given task Follow all safety rules and quality standards Work with team members to maximize productivity and efficiency Assist in the preparation of product for shipment Report any unsafe work conditions or practice to supervisor Must be able to lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds) or using a hoist Qualifications Six months to one-year related experience and/or training Experience with steel, aluminum and/or stainless steel required Experience with SMAW, GTAW and GMAW welding highly preferred Ability to follow instructions given both verbally and in written form Willingness to learn and work to the best of his/her abilities and have a dependable work ethic Knowledge of welding equipment and associated tooling including proper set up and use Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals Familiarity with the metric system Ability to stand continuously for long periods of time Willing to work 40+ hours a week Pass substance abuse testing Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Location California Salary Range $25 - $35 per hour (DOE) Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Required Travel: 26 - 50% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $58,058.00 - $66,352.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join our Elevator Support Unit (ESU)! The position will support contracted skilled trades work on Weapon Elevators and Aircraft Elevators and their systems on U.S. Navy ships. The selected candidate will support ESU by performing a variety of skilled trades, maintenance and technical tasks on aircraft carrier elevators, cargo handling systems and associated equipment, including aircraft elevators, weapons elevators and vertical stores conveyors. Work includes daily activities of physical labor in an industrial and shipboard environment. Travel within and outside of the continental United States may be required. This is a full-time position, located in San Diego, CA. *This position does not provide relocation assistance. What You Will Do Provides welding support certified in Shielded Metal Arc Welding (SMAW), Gas Tungsten Arc Welding (TIG) and Gas Metal Arc Welding (MIG) on Plate or Pipe. Uses Brazing and / or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Welds components in flat, vertical, or overhead positions. Ensures shop safety and housekeeping are followed. Ensures all materials and equipment are properly and safely stored, protected, and maintained. Recognizes, set ups, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Lays out, positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. What You Must Have High School education, or Trade School or equivalent, and 6 years of related experience. Current or prior experience welding Shielded Metal Arc Welding (SMAW)/Stick, Gas Tungsten Arc Welding (GTAW)/TIG, and Gas Metal Arc Welding (GMAW)/MIG. Ability to obtain and maintain a DBIDS badge, Security Clearance, and must be a US Citizen. Ability to read, interpret, and follow detailed oral and written instructions, schematics or drawings, technical documents, and to conduct activities in a safe manner. Must be able to calibrate, and make minor repairs on tools/equipment. Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations. Must provide own hand tools as designated per trades specialty. Bonus Points For... 6 - 8 years experience as a Production Welder preferred. Production welder experience while in the Navy or working as a civilian production welder supporting Navy ship repair or new construction. Completion of a formal course of Vocational or Navy welding training and certification. Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-###-#### for assistance. Press #3 for HII Mission Technologies.

**SUPERSTAR FABRICATOR / WELDER WANTED** We want to talk to you if: • You are detail-oriented, reliable, loyal, and technologically savvy. • You have exceptional hand-eye coordination. • You want a career, not just a job. • Your organizational skills allow you to submit daily project updates and daily logs. • You want to become a top-of-the-industry fabricator (We promote from within). Please DON'T answer this ad if: • You cannot commit to a minimum 2-year engagement. • You have trouble showing up for work on time. • You can't work well with others. • You're in the habit of calling in sick on Monday morning. Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are an extremely stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. Qualifications Previous welding and fabricating experience preferred. Must be able to pass a U.S Government background check. Ability to work independently and on a team to complete daily activities according to work schedules. A valid Driver's License and clean driving record (Commercial Driver's License a plus). Ability to lift up to 70 lb Work hard in demanding environments Must have reliable transportation Must be able to pass pre-employment screenings. Job Type: Full-time Salary: $18.00 - $26.00 per hour Benefits: 401(k) 401(k) matching Dental Insurance Employee assistance program Employee discount Health insurance Life insurance Paid time off Referral program Vision insurance Experience level: 3 years Shift: 8-hour shift Weekly day range: Monday to Friday Ability to commute/relocate: San Diego, CA: Reliably commute or plan to relocate before starting work (Required) Experience: Welding: 3 years (Required) Metal Fabrication: 3 years (Required) Work Location: In person

You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help You will perform reviews of documents associated with completed work and trade processes. You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work. You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program. You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules. You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations. You will serve as an Expert Welder leading a group to ensure work assignments are completed. Requirements Help Conditions of employment Must be a US Citizen. Must be determined suitable for federal employment. Must participate in the direct deposit pay program. New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. Males born after 12-31-59 must be registered for Selective Service. This is a bargaining unit position. You will be required to successfully complete a pre-appointment physical examination. This position requires the ability to lift and carry items weighing 50 pounds. Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing. You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift. Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs. This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas. This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required. This position requires rotating shift work. Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc. Must maintain visual inspection qualifications per VT-271. Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: Special Schedules/MS_A143_143_Seattle_Everett_Tacoma,Washington.pdf CA: Special Schedules/AM_A017_017_San_Diego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Schedules/survey-sch/044/044R-06Aug2024.pdf Portsmouth Naval Shipyard: ME: Schedules/survey-sch/087/087R-02Jan2025.pdf CA: Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA: Schedules/survey-sch/140/140R-09Jul2024.pdf PA: Schedules/survey-sch/115/115R-02Jan2025.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has an open position for a Welder Lead, with a minimum of six years marine and/or shipyard experience. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation. Welder Lead Job Summary: Responsibilities include but are not limited to setting up work sites for hot work, hot work chits, gas free certifications and fire watch coordination. Determines material requirements for repairs. Reads and works from basic work specifications and drawings. Manages welders and fitters to accomplish the scope of work provided, meet schedule deadlines, and comply with safety requirements. Inspects welder fit up prior to welding, documents fit up on the inspection log, coordinates NDT inspections with QA, accomplish 009-06 inspections, submits Inspection deficiency reports and conditions found reports. Obtain welding qualifications to include GTAW, FCAW, GMAW, SMAW, BRAZE, and LOKRING. Job Requirements and Qualifications: Education: High School or equivalent level preferred. Experience and Knowledge: Minimum of 6-10 years of experience as a welder/fitter within the marine and/or shipyard industry. Demonstrate knowledge of industrial processes and safety standards and requirements for hot work including: Marine Chemist Certifications, Shipyard Competent Person updates, Gas Free Work Scopes and Hot Work Permits. Must be proficient in blueprint reading. Must be proficient in 4E specifications. Possess knowledge of MIL-STD-22D, MIL-STD-1689, Tech pub-278, Posses various welding qualifications. Demonstrated positions of management and/or leadership. Demonstrate conflict resolution capabilities. Possess general computer skills. Proficient in Microsoft Office applications. Benefits: Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) Paid Time Off Company paid holidays Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan Career development opportunities This position may require access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport. WELDER LEAD EEO/AA/Vet/Disabled

Full-time Description The general purpose of this position is to weld simple to complex components and/or structures while meeting all safety, quality, and schedule requirements. Responsible for various types of weld preparation, welding, and weld finishing operations to accomplish welding in accordance with customer drawings and specifications. Requirements Proficient in assigned aluminum welding techniques, including weld fillets, gusset toe and wraps, frame wraps and termination Demonstrated ability to weld into corners / vertical intersections with minimal blending Ability to evaluate and correct basic weld pick up, with minimal supervision Basic knowledge in assigned welding techniques Basic knowledge of wire and filler material applications for various steel alloys and aluminum Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) Working in compliance with all safety, quality, environmental and health requirements. Job Requirements Must be able to pass eye test and workmanship qualification test. Must be tested and fit for respirator use. Willing to work any shift and overtime as required. Education and/or Experience High school diploma required. Minimum of 2 years of proven experience in a welding trade is required. Shipyard experience is preferred, but not required. Knowledge, Skills, and Abilities Ability to take direction and follow instructions Good mechanical aptitude with ability to produce consistent quality Ability to inspect and correct basic weld pick-up without supervision Ability to work independently and as part of a team Problem-solving and trouble-shooting skills Excellent hand-eye coordination; good spatial orientation Ability to consistently meet production deadlines Ability to use conventional and precision measuring instruments Ability to pass a skills evaluation test to demonstrate welding ability Ability to weld in uncomfortable positions where applicable Ability to work on beams, scaffolding, ladders and confined spaces. Ability and willingness to work with and to teach less-skilled workers Ability to maintain and perform routine preventive maintenance on welding equipment Physical Requirements: Frequent standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Physical ability to lift, push, pull and carry 50+ lbs., bend, stoop and climb scaffold and work on elevated work surfaces, beams, ladders, and confined spaces. While performing the duties of this job the employee is regularly required to use hands and fingers to handle, feel, talk, or hear. The vision requirements include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Works in all areas of the shipyard and on-board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. The noise level in the work environment can vary and is often loud. Salary Description $25 - $38 Hourly - DOE

POSSIBLE TRAVEL TO WISCONSIN WITH PER DIEM JOB DESCRIPTION SUMMARY/OBJECTIVE The Pipe Welder JM1 Welds pipe components , hangers and assist targeting of piping for production of Navy ship repair and other marine and commercial equipment. Pipe Welder JM1 must possess trade specific tools. ESSENTIAL FUNCTIONS / DUTIES Setup welding equipment Fit and Tack parts together in preparation for welding Certify for basic steel Perform precise fitting work on components Running lines and leads Blueprint reading and interpret weld symbols Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. Ensure that employees assigned with Firewatch duties are in place and ready prior to begin hot work Fill out Job JSA forms Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. PHYSICAL DEMANDS The Pipe Welder JM1 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Along with such movements, employee is required to lift parts/machinery of up to 75 pounds. Additional demands are listed below: Able to climb ladders and work off scaffolding Able to lift, carry, and or push up to 50 - 75 lbs. throughout the shift (including overtime) * Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions KNOWLEDGE / SKILLS Must be certified in Pipe Welding Ability to weld in all positions Ability to troubleshoot minor welding equipment problems Must be able to evaluate the use of various resources and make knowledgeable decisions regarding safety and company procedures and policies Able to read a tape measure Pass Welder Workmanship Training (WWT) Able to operate sawzall, 4” & 7” grinders, and various other tools Able to use Weld Gauges COMPETENCIES Communication Proficiency Flexibility (Job duties & schedule) Work well with others in all areas where SCW&M is performing work Follow verbal/written instructions Teamwork orientation SUPERVISORY RESPONSIBILTY Pipe Welder JM1 position has no supervisory responsibilities. POSITION TYPE / HOURS OF WORK This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6:00 a.m. to 2:30 p.m. / 2:30 p.m. to 11:00 p.m. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs. REQUIRED EDUCATION AND EXPERIENCE Must be certified Pipe Welder Must have a minimum of 1-2 years of ship repair experience and/or skill set. Must be able to speak and understand Basic English Work Authorization Clearance For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card. Other Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

CTR Group is seeking several Pipe Welder's local to the San Diego, CA area. Immediate openings and urgently hiring! What We Offer: Weekly Pay - you receive a paycheck every week Comprehensive Benefits Package Safety First! RESPONSIBILITIES: (may include but are not limited to) Read and interpret basic drawings and weld symbols Pass weld test for all Company weld procedures in the 6GR position Pass Company TIG weld test procedure for Carbon Steel, SS and CUNI pipe Work to Company housekeeping procedure Inspection of work, identification of potential problems, initiation of corrective actions Increase awareness of Quality procedures within department Perform as a productive working team member that meets daily goals set by the supervisor Continuously improve communications and flexibility within the team Help build the team environment Build pride of workmanship and quality through on job training Contribute towards innovation / productivity improvements Assist in the control of waste elimination, e.g. materials, consumables etc Assist supervisor to maintain control of department equipment and its maintenance Must have full set of personal tools Work towards the team goal of delivering the vessel on time Always be ready to start shift on time Follow Company guidelines and procedures Do not leave job early or return late from break times Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage REQUIREMENTS: (may include but are not limited to) Must be able to TIG Carbon, Stainless steel, and Copper Nickle Pipe Ability to pass “A Class” skills validation test to demonstrate welding ability for restricted open root welds Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel, carbon steel and stainless steel to meet contract requirements for A Class welding on the vessel Must have the ability to bend, squat, stoop, crawl, and kneel Perform prolonged standing Ability to turn head from side to side and about the vertical axis Lift/push/pull 50lbs on an occasional basis Lift/push/pull up to 20lbs on a frequent basis Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps) Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts Able to work at a variety of levels (ex. waist, eye, overhead) Demonstrate the ability to safely and appropriately use required tools and equipment Demonstrate good balance while working on uneven surfaces and maneuvering obstacles Possess sufficient handgrip and coordination to carry and operate tools and equipment Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards Ability to withstand cold and hot temperatures Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time within OSHA guidelines Able to respond to verbal and audible sounds/commands Able to utilize adequate visual skills Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Must be able to tour all vessels and work sites While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear The employee is occasionally required to sit Candidates must meet the following employment eligibility guidelines to be considered for employment: 18 years of age or older at time of application Able to provide proof of US Person Status Willing to submit to a drug screen Willing to submit to a background check Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

Epsilon Systems Solutions, Inc. is seeking a full time Welder II in San Diego, CA Summary: This position involves welding aluminum components together according to design specifications or repairing various types of shipboard equipment. The work is performed based on layouts, blueprints, or work orders, using SWRMC-approved welding procedures with various arc and gas welding equipment. Duties and Responsibilities: Provides aluminum welding support certified in Gas Tungsten Arc Welding (TIG), Gas Metal Arc Welding (MIG) and Gas Metal Arc Welding Pulse (GMAW-P) using 5356 filler wire. Uses hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Welds components in flat, vertical, or overhead positions. Ignites torches or starts power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Clamps, holds, tack-welds, heat-bends, grinds or bolts component parts to obtain required configurations and positions for welding. Detects faulty operation of equipment or defective materials and notify supervisors. Operates manual or semi-automatic welding equipment to fuse aluminum segments, using the aforementioned processes (TIG, MIG, GMAW-P). Ensure shop safety and housekeeping are followed. Ensures all materials and equipment are properly and safely stored, protected, and maintained. Reports the status and progress of all work to the government supervisor. Alerts the government supervisor of the causes of work delays. Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Examines work pieces for defects and measure work pieces with straight edges or templates to ensure conformance with specifications. Recognizes, set ups, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Lays out, positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Performs welding methods using a mirror. Required Qualifications: High School diploma or equivalent Minimum 5 years work related experience Minimum 3 years specific experience as a qualified production welder Ability to obtain and maintain a DBIDS badge Ability to communicate verbally and electronically Ability to read schematics, follow detailed instructions and be self-motivated Ability to read, interpret, and follow detailed oral and written instructions, schematics or drawings and to conduct activities in a safe manner Ability to see details at close range (within a few feet of the observer) Ability to concentrate on a task over a period of time without being distracted Ability to qualify to SWRMC approved welding and brazing procedures Ability to make decisions using sound judgment while complying with policies, procedure appropriate principles and applicable state and federal laws and regulations Familiar with a variety of the field's concepts, practices, and procedures Knowledge of Qualify Craftsman 301 for civilians Knowledge of machines and tools, including their designs, uses, repair, and maintenance Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models Preferred Qualifications: Production welder experience while in the Navy or working as a civilian production welder supporting Navy ship repair or new construction Completion of a formal course of vocational or Navy welding training and certification Pay Range: The pay range for this role is $26.07 to $32.30 hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. ADA Notifications: Frequent standing, sitting, crawling, kneeling, stooping, crouching, walking, handling, feeling with hands, reaching with arms Occasional lifting up to 50 pounds Noise conditions range from very quiet to very noisy Manual and finger dexterity; able to grasp, manipulate, assemble small objects Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: High School Diploma or GED A minimum of three to five years of applicable welding experience ASNT NDT Level II Certification, ore relevant experience. One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other. Skills and Proficiencies: Read and interpret specifications Read and understand shipboard installation drawings, blueprints, and job orders Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc. Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment Weld parts together using gas welding, or brazing and any combination of arc welding processes Perform thermal cutting and grinding Repair broken or cracked parts, fill holes, and increase size of metal parts Safety and Physical Requirements: (have or obtain the following certifications) Occupation Safety Haz-Mat Certification Shipyard Competent Person Certification Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification Working in Confined Spaces Certification Training and the Ability to Safely Lift and Move Objects of 50 LBS Security and Work Locations: Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA You will work at government facilities. You must be a US Citizenship eligible for clearance. You must pass a background investigation You must have a valid driver's license Other Responsibilities: Work overtime upon management request Maintain and safeguard company equipment and tools Maintain and safeguard welding inventory Organize and schedule welding jobs to an on-time completion Physical Requirements: Lifts at least 100 pounds at one time and 60 pounds for an extended period of time. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.

Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques. Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD. Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings. Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools. Experience and Skills Requirements: Must possess a high school, trade or vocational school degree. 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment. Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred. Must have or have the ability to obtain a SECRET clearance. Must have the ability to obtain base access and security credentials. Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Travel may be required within and outside of the continental United States. Due to export control regulations, this role is open to U.S. citizens only. Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at *********************** or follow us on our LinkedIn page at ********************************************************** To be considered you must apply by going to ***********************.

Required Travel: 51 - 75% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $50,000.00 - $62,400.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Come Join HII Where Hard Stuff Is Done Right! HII Platform Modernization (PM) trades teams provide expert solutions on submarine alterations and installations for fleet modernization. The selected Welder** candidate will support PM, working closely with our skilled trades teams, on active class surface ships, submarines, and shore-based facilities using various welding processes, mechanical techniques and related duties to remove, install, and upgrade industrial equipment, assisting with alterations and installations for fleet modernization on various contracts. Selected candidate will be required to travel to shipyards and military bases located around the country and abroad when not assigned to a local task. Per Diem provided based on location when on travel. Travel and lodging expenses are covered by the company. **Candidate must be able to demonstrate welding ability on needed processes through qualification testing and pass with a satisfactory grade from our Quality Assurance Team within the first three weeks from start date for continued employment. Essential Job Responsibilities Display levels of quality, integrity, safety, respect, engagement, and performance consistent with company values. Support trades team by working on active class surface ships to assist with alterations and installations for fleet modernization. Perform all work in accordance with established quality and safety procedures. Perform a variety of simple and complicated tasks, both routine and non-routine, including those outside of specialty, related to shipboard maintenance to meet standards on various contracts at company, customer and/or field locations. Work from blueprints, engineering sketches, charts, or work orders. Install, operate, maintain, repair, and modify structural and piping elements and equipment. Lay out and mark points and lines on parts or subassemblies using rule, square, scribe or templates. Cut, fit, assemble, and position pieces to be welded into jigs, holding fixtures, and existing structure using hand and powered tools. Troubleshoot and diagnose malfunctions to eliminate problems in minimum time. Participate in special projects as required. Apply comprehensive understanding of appropriate welding processes and production to join, surface, fabricate, or repair parts of metal or other weld-able materials toward completion of assignments. Develop and use technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Inspect completed work for conformance to specifications. Maintain effective customer communications and relations. May provide onsite training of customer support personnel. Provide guidance and work leadership to less-experienced welders. May serve as a group leader. Minimum Qualifications **Candidate must be able to demonstrate welding ability on needed processes through qualification testing and pass with a satisfactory grade from our Quality Assurance Team within the first three weeks from start date for continued employment. Must have High School education or Trade School or equivalent, and 4 years of related experience. Prefer technical/professional certifications. Must be able to obtain medical clearance to wear a half-face respirator. Must have welding experience with stick welding (SMAW) process in all positions from 2G to 6G for Carbon and Stainless Steel. Must have welding experience with gas metal arc welding (GMAW) process in all positions from 2G to 6G for Aluminum. Must have strong knowledge of reading and interpreting drawings, blueprints, weldments, technical manuals, engineering sketches, charts and/or work orders as well as written and verbal instruction for products to be fabricated and/or installed. Must be capable of using various measuring instruments. Must have knowledge of quality control steps and procedures. Must adhere to safety and quality procedures set forth by HII and host facilities. Must have experience working in a team environment. Must be able to obtain and maintain a DoD secret security clearance and maintain clearance level throughout employment. Must be able to obtain base access credentials within 60 days of start date and maintain credentials throughout employment. Must be able to travel between 50% - 75% when not assigned to local tasking. Must be able to provide hand tools per trades designation. Preferred Requirements Candidate with experience/knowledge in gas tungsten arc welding (GTAW) and/or flux cored arc welding (FCAW) processes/positions preferred. Candidate with current or prior welding certificates applicable with MIL-STD-248 preferred. Combination pipe and structural welders with experience on marine vessels and associated systems preferred. Candidates with shipfitting experience are highly desired. Candidate with shipboard experience highly desired. Candidates who are currently enrolled or have graduated from and/or completed a vocational school or skilled trades certificate program are preferred. Current OSHA 10 Maritime Certificate a plus. Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-###-#### for assistance. Press #3 for HII Mission Technologies.

**SUPERSTAR FABRICATOR / WELDER WANTED** We want to talk to you if: · You are detail-oriented, reliable, loyal, and technologically savvy. · You have exceptional hand-eye coordination. · You want a career, not just a job. · Your organizational skills allow you to submit daily project updates and daily logs. · You want to become a top-of-the-industry fabricator (We promote from within). Please DON'T answer this ad if: · You cannot commit to a minimum 2-year engagement. · You have trouble showing up for work on time. · You can't work well with others. · You're in the habit of calling in sick on Monday morning. Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are an extremely stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. Qualifications Previous welding and fabricating experience preferred. Must be able to pass a U.S Government background check. Ability to work independently and on a team to complete daily activities according to work schedules. A valid Driver's License and clean driving record (Commercial Driver's License a plus). Ability to lift up to 70 lb Work hard in demanding environments Must have reliable transportation Must be able to pass pre-employment screenings. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental Insurance Employee assistance program Employee discount Health insurance Life insurance Paid time off Referral program Vision insurance Experience level: 3 years Shift: 8-hour shift Weekly day range: Monday to Friday NOTE: The above statements are intended to describe the general nature and level of work being performed by incumbents. They are not intended to be an exhaustive list of all responsibilities, duties and skills required by all incumbents. Incumbents may perform other duties as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Management retains the right to add to or change the duties of the position at any time. In compliance with pay transparency requirements, the salary range for this role is provided above. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. Vortex also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, and schedule type.

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has multiple positions open for Welder Journeyman, with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation Job Summary / Welder Journeyman: Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. Job Requirements and Experience: Must be 18 years of age or older to apply. Minimum 5 years of marine and/or shipyard experience preferred. Benefits: Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) Paid Time Off Company paid holidays Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) Career development opportunities This position may require access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport. Welder Journeyman EEO/AA/Vet/Disabled