Welder jobs in Clarksville, TN - 329 jobs

Full-time Description What You Will Do: We are seeking a Welder Apprentice to learn the skills and techniques necessary to become a professional welder. The Welder Apprentice will assist experienced welders with various tasks such as cutting, grinding, welding and fitting metal parts. This position requires a willingness to perform physical labor and learn from a team of experienced professionals. Assist welders in setting up and preparing weld surfaces, equipment, and materials as needed Cut and grind metal pieces to fit properly and remove any impurities Perform basic welding tasks using MIG, TIG, and stick welding techniques Clean and maintain welding equipment and tools daily Move materials and equipment as directed by lead welders Learn and follow safety guidelines and procedures at all times while performing welding tasks Collaborate with other team members to complete projects on time and to performance expectations Attend mandatory safety meetings and training sessions Assist fabrication team with various tasks (Sawing, Rolling, Bending, Fit up) Assist in assembly of product packages Assist in painting and sandblasting as needed Read blueprints and drawings and take measurements to plan layout Align parts using calipers, tape measures, etc. and clamp pieces. Test and inspect welded surfaces and structure to determine flaws Perform dimensional checks throughout the process to ensure that tolerances are adhered to according to blueprints Confer with engineering, supervisor and manufacturing team members to exchange technical information Assist in the design of fixtures and tooling to meet special engineering needs Communicate effectively with the team to clarify instructions and address production issues Be willing to Float to other Departments to meet production demands as needed Work required overtime periodically The job criteria may include other duties, responsibilities and activities, which may change or be assigned at any time with or without notice Work schedule: Monday through Friday - 6:15 am - 2:45 pm. 30-minute lunch break Requirements Requirements: Education: High School Diploma or equivalent Experience: Previous welding experience and experience operating forklift preferred, Microsoft platform proficient Functional Skills: Ability to work in a physically demanding environment and lift up to 50 pounds. Excellent hand-eye coordination and attention to detail Language Skills: Proficiency in the English language, both written and verbal, is essential for effective communication with team members, documenting work, and ensuring safety in the workplace. Culture Match Behaviors: Commitment to safety - Collaborative -Inquisitive - Strong work ethic -Flexibility -Continuous improvement. Ability to stand, sit, walk, bend, reach, stoop, squat, kneel, twist, push, pull, and carry items frequently Aerzen USA Corp is an equal opportunity employer and selects employees on the basis of skills and experience. Aerzen USA ensures that all persons are entitled to equal employment opportunity without regard to race, color, gender, gender identity, sexual orientation, pregnancy, age, national origin, religion, marital status, ancestry, disability, veteran's status, and any other characteristic protected under applicable federal, state, or local laws. All employment decisions and actions are based on merit and made without regard to any characteristic protected by state, federal or local law. All offers of employment at Aerzen USA Corp are contingent upon clear results of a thorough background check. In compliance with the Drug-Free Workplace Act of 1988, Aerzen USA Corp has a longstanding commitment to provide a safe, quality-oriented, and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of Aerzen employees and to the security of the company's equipment and facilities. For these reasons, Aerzen USA Corp is committed to the elimination of drug and alcohol use and misuse in the workplace. Applicants being considered for hire must pass a drug test before beginning work. Refusal to submit to testing will result in disqualification of further employment consideration. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including termination of employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. Salary Description $18.00 - $21.00 hourly

Job Description Are you a talented welder looking to travel and work on exciting projects across the country? Tanco Engineering wants to hear from you! With over 40 years in the industry, we're proud of our reputation for safety, reliability, and excellence. As a Storage Tank Welder with us, you'll play a critical role in ensuring the quality and safety of storage tanks. You'll join a friendly team that values your skills and contributions while giving you the chance to work in varied locations, meeting new people, and tackling interesting challenges. At Tanco Engineering, we believe in teamwork and open communication. You won't just be a number; you'll be a valued part of our family. So, if you're ready for an opportunity to shine, let's make it happen! Position Duties: Utilize your welding skills to ensure the structural integrity of storage tanks through various techniques like stick and flux core welding. Read and interpret blueprints to ensure your welding tasks meet all specifications. Inspect your work for quality control, promptly addressing any issues you may uncover. Work alongside your team to ensure projects are completed efficiently and on time. Maintain a safe work environment by following all safety protocols. Keep your welding equipment in top shape with routine maintenance and troubleshooting as needed. Requirements At least a year of welding experience, ideally in the storage tank industry. Attention to detail with a skill for spotting potential defects. A willingness to lift heavy equipment and engage in physically demanding tasks. Strong communication abilities coupled with a collaborative spirit. A passion for travel and the flexibility to work in various locations. A TWIC card might be required Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Background checks will also be included in the hiring procedure. Must be over 18 and eligible to work in the United States. Benefits Medical, dental, & vision insurance Retirement plan & ESOP Competitive pay with annual reviews. Join our team and enjoy competitive starting pay of $30-$34 per hour, which may vary depending on your experience and the results of your welding test. In addition to the attractive pay range, we offer a subsistence allowance of $125 (exceptions may apply per location) and reimbursement of $0.70 per mile for travel (when applicable).

Job Description We are seeking precision-driven pipefitters and TIG pipe welders to support the fabrication and installation of high-purity stainless steel piping systems. This is a 8-12-week W2 contract role with strong potential for full-time hire based on performance, skill, and reliability. You'll be working in a clean, high-spec manufacturing environment, fabricating complex sanitary and industrial-grade process piping for global water purification, pharmaceutical, and industrial sanitation systems. Your ability to read blueprints, interpret isometric pipe drawings, and execute clean, consistent welds will directly support systems deployed in some of the world's most critical environments. This is an excellent opportunity for skilled tradespeople who take pride in precision layout, measurement, and high-integrity welds, and who thrive in structured, safety-conscious teams. Pay & Benefits Full-Time $35 - $40 /hr Medical, Dental, Vision, 401k, Paid Leave, Personal Leave and Sick Leave Contract 8-12 week contract W2 employee with full benefits from day 1 Strong ability to transition to full time employee based on performance Shift & Schedule Monday - Thursday 6:00am - 4:30pm OT may be required on Friday's 6:00am - 2:30pm Requirements Responsibilities Fit, prep, and install stainless steel process piping from blueprints, isometric drawings, and P&IDs Perform precision TIG welding on sanitary and industrial pipe (primarily stainless steel, occasional carbon) Execute layout, cutting, tacking, and fit-up of complex piping runs with minimal supervision Ensure welds meet internal quality and high-purity cleanliness standards (sanitary or orbital TIG where required) Use measurement tools (e.g., tape measures, levels, squares) to maintain tight tolerances and proper slope/fall Coordinate with mechanical team to complete full system builds (skids, racks, pump packages, etc.) Use material handling equipment (forklifts, overhead cranes, carts) to move and stage pipe and components Maintain a clean, organized, and safe work area in line with manufacturing and industry standards Support project throughput and team goals by meeting production schedules and upholding quality targets Participate in safety and process improvement efforts; uphold all QA/QC protocols and inspection criteria Benefits Qualifications 3+ years of hands-on pipefitting and TIG pipe welding experience, preferably in industrial, sanitary, or high-spec manufacturing environments Proficient in reading and interpreting blueprints, isometric piping diagrams, weld symbols, and spool sheets Demonstrated ability to fit and weld stainless steel pipe to tight tolerances with minimal supervision Experience with sanitary pipefitting a strong plus (orbital welding, purge welding, autogenous welds, etc.) Comfortable working in structured, clean environments with tight tolerances and high expectations Familiar with hand and power tools: grinders, saws, bevelers, purging equipment, etc. Forklift and overhead crane experience preferred High school diploma or GED required U.S. Citizenship required due to client worksite security restrictions Must pass hands-on weld test (TIG on stainless process pipe) before assignment Willing to work overtime as needed, including some Fridays

Welder - Locomotive Shift: 1st Shift, 2nd Shift, and Weekend Day Shifts Pay: $21.50 per hour based on experience with a $1 shift differential Fulltime, Benefits, and Weekly Pay Day 1st Shift - Mon-Thurs 6am-4pm Nights 2nd Shift - Nights Mon-Thurs 8pm-6am Weekend (Friday - Sunday 6am - 6pm) - 36 hours worked, paid for 40 hours Must be flexible to train on 1st and then move to Weekend Day Shift. Our positions are full-time, year-around employment with paid training. We offer: 5 Days of PTO 6 Paid Holidays Up to 50% of health insurance premiums paid by Impact Access to a retirement plan, financial fitness, and employee savings programs Job Purpose: The Locomotive Welder is responsible for the fabrication, assembly, repair, inspection, preventive maintenance, and troubleshooting of locomotive components to ensure compliance with Federal Railroad Administration (FRA) and company specifications. Knowledge of the following welding processes (MIG, Dual-Shield, Flux-Core, Pipe, Fabrication, Stick). Are you flexible to commute? Key Responsibilities: Ensure adherence to all railroad safety regulations and FRA guidelines, including Personal Blue Signal Protection of Workers. Perform welding on locomotive components, including heavy plate and sheet metal, in various positions (vertical, flat, overhead). Work from technical drawings and weld procedure specifications to execute tasks accurately. Utilize welding equipment, cutting torches, grinders, and other tools safely and effectively. Conduct inspections and troubleshoot issues related to locomotive components. Maintain accurate written and computer records of work performed. Participate in continuous improvement initiatives and problem-solving activities. Maintain a clean and organized work environment and care for tools and equipment. Assist in other maintenance and repair tasks as directed by supervision. Follow all safety protocols and utilize personal protective equipment (PPE). Advanced Responsibilities: Perform pipe welding and train junior welders. Qualifications: Minimum of 5 years of experience as a locomotive welder. Knowledge of the following welding processes MIG, Dual-Shield, Flux-Core, Pipe, Fabrication, Stick. Preferred certifications in SMAW and socket pipe welding. Knowledge of locomotive components and mechanical aptitude. Physical Requirements: Ability to lift up to 50 lbs. and perform physical activities including climbing, reaching, and kneeling. Capability to work in confined spaces and at heights exceeding 6 ft with appropriate safety measures. Exposure to welding arcs, high noise levels, and varying weather conditions. Work Environment: Position may be indoors or outdoors, subject to temperature extremes and weather elements. Must work cooperatively as part of a team to meet production goals. Safety Considerations: This position is safety-sensitive, requiring strict adherence to safety policies and procedures. Preferred Skills: Certified Welder with a strong understanding of locomotive components and mechanical systems. EOE Thank you for your interest in Impact Workforce Solutions, we are proud to be an Equal Employment Opportunity Employer and participate in the E-Verify eligibility confirmation program.

We are seeking welders to join our team, specializing in Flux Core Welding on Mild Steel. The role involves utilizing MIG, TIG, and other welding techniques, interpreting blueprints, and collaborating effectively within a team under supervision. **Responsibilities** + Perform Flux Core Welding on Mild Steel. + Utilize MIG and TIG welding techniques as required. + Read and interpret blueprints accurately. + Collaborate with team members and work under the guidance of a supervisor. + Ensure quality and precision in welding tasks. **Essential Skills** + Proficiency in Flux Core, MIG, and TIG welding. + Ability to read and interpret blueprints. + Previous welding experience of 3-6 months. + Strong team collaboration skills. **Work Environment** The role is based in an outdoor environment, which can be very hot. Safety is a priority, and you are required to wear steel-toed ankle-high leather boots, long sleeves, and pants. Contact lenses are not permitted due to welding smoke. 2nd shift from Monday to Friday, **3:15 pm to 12:45 am** **Job Type & Location** This is a Contract to Hire position based out of Ashland City, TN. **Pay and Benefits** The pay range for this position is $20.30 - $21.30/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Ashland City,TN. **Application Deadline** This position is anticipated to close on Jan 22, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Opportunity: Pipe Welder Pay: $30-$33 per hour Are you an experienced Pipe Welder looking to take the next step in your career? Join our team in Ghent! Key Responsibilities: Read and interpret blueprints Perform high-quality TIG and Stick welding on steel pipe Work independently and collaboratively within a team Ensure compliance with safety standards Qualifications: Minimum of 2 years of verifiable TIG and Stick welding experience Strong blueprint reading skills Mechanical and industrial experience Ability to work overtime when required If you're ready to contribute your skills and grow with us, apply today!

Job Description Job Opportunity: Pipe Welder Pay: $30-$33 per hour Are you an experienced Pipe Welder looking to take the next step in your career? Join our team in Ghent! Key Responsibilities: Read and interpret blueprints Perform high-quality TIG and Stick welding on steel pipe Work independently and collaboratively within a team Ensure compliance with safety standards Qualifications: Minimum of 2 years of verifiable TIG and Stick welding experience Strong blueprint reading skills Mechanical and industrial experience Ability to work overtime when required If you're ready to contribute your skills and grow with us, apply today!

Temp A pipe welder specializes in joining and repairing metal piping systems by using welding techniques to create strong, leak-proof connections for industrial, commercial, or structural applications.

Company / Location Information A.O. Smith is a global leader applying innovative technologies and energy-efficient solutions to products manufactured and marketed worldwide. The company is one of the world's leading manufacturers of residential and commercial water heating equipment and boilers, as well as a manufacturer of water treatment products for residential and light commercial applications. A. O. Smith is headquartered in Milwaukee, Wisconsin, with approximately 12,000 employees at operations in the United States, Canada, China, India, Mexico, the Netherlands, and the United Kingdom. Primary Function Are you a highly skilled and proactive Welding Technician with a strong focus on equipment reliability and continuous improvement? This critical role involves maintaining operational efficiency by performing mechanical and electrical maintenance, troubleshooting advanced welding and robotic equipment, and ensuring all processes meet rigorous quality standards. You will be a key contributor, working closely with Engineering, Production, and Maintenance teams to uphold the highest levels of safety and equipment uptime. If you have a strong mechanical aptitude, attention to detail, and thrive in a fast-paced production environment, we encourage you to apply! Responsibilities * Equipment Support & Troubleshooting: Support production by providing timely troubleshooting and maintenance for a variety of welding equipment, including: * Resistance projection welders * Robotic welding cells * Manual welding booths * Resistance mash seam welders * Robotic Maintenance & Repair: Mechanically and electrically rebuild, repair, and maintain Fanuc 6-axis robots. * This includes replacing motors, gearboxes, internal cables, and end effectors; performing greasing; and mastering/re-mastering robot groups. * Install and calibrate servo robot vision systems and teach coordinated motion. * Welding Process Management: Analyze and inspect welds, adjusting equipment settings to meet production and quality requirements/standards. * Modify and document program changes for welding equipment within accepted ranges. * Adjust and calibrate Servo Robot laser tracking software. * Replace and rebuild GMAW peripheral equipment. * System and Documentation: Maintain detailed records of work and tasks using SAP Work Orders. * Safety & Collaboration: Report equipment status and maintenance needs to leadership. Uphold all safety protocols, especially NFPA-70E and OSHA standards. * Training: Perform shop (on-the-job) and lab training for operators on various equipment and processes. Qualifications * High School Diploma or GED. * Completion of a TCAT or similar technical program with an emphasis on robotics is highly preferred. * 3+ years of related work experience working on a production floor. * 3+ years of related work experience with Gas Metal Arc Welding (GMAW). * 3+ years of related experience repairing 6-axis robots (mechanical and electrical troubleshooting). Technical Skills * Welding Systems Expertise: Strong knowledge of set-ups, changeovers, and mechanical/electrical troubleshooting for the supported welding equipment (listed above). * Robotics/Controls: * Expertise in Fanuc I/O: Ability to read, configure, set up, and manipulate (forcing) I/O. * Ability to teach tool center points (TCP) and install/calibrate vision systems. * Compliance: Must possess OSHA-10 Certification and NFPA-70E training. Core Competencies * Excellent communication (verbal & written) and organizational skills. * Proficiency in managing Microsoft Outlook Mail & Calendar for timely and prepared responses. * Strong mechanical aptitude and a proactive approach to equipment reliability. Education High School Diploma or GED Trade School Degree Physical Requirements * Must wear required Personal Protective Equipment (PPE) such as steel-toe shoes/boots, ear and eye protection. * Prolonged periods of sitting/standing and frequent bending and reaching. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. * The employee frequently is required to walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. * The employee must be able to lift and/or move up to 20 pounds overhead and maneuver various parts weighting up to 50 lbs. We Offer Competitive compensation package and comprehensive benefits plans which include medical and dental insurance, company-sponsored life insurance, retirement security savings plan, short- and long-term disability programs and tuition assistance. #LI-Onsite #LI-AO ADA Statement & EEO Statement In developing this job description care was taken to include all competencies needed to successfully perform in this position. However, for Americans with Disabilities Act (ADA) purposes, the essential functions of the job may or may not have been described for purposes of ADA reasonable accommodation. All reasonable accommodation requests will be reviewed and evaluated on a case-by-case basis. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law. Nearest Major Market: Nashville Job Segment: Wastewater, Water Treatment, Electrical, HVAC, Technician, Engineering, Operations, Technology

Job Description GENERAL DESCRIPTION The Welder/Fabricator is responsible for fabrication and welding of metal parts to complete units and/or sub-units for SGS Machinery. WHY WORK FOR US? At Wells, we empower our team members to deliver an exceptional client experience. Our employees are talented problem solvers that shine in preconstruction, engineering, operations, and project management. They bring innovative solutions that yield outstanding results. In the design and construction industry, we focus on honesty and hard work to build trust that lasts beyond individual projects. Our team is consistently working to improve building processes and raise industry standards. We meet our partners' needs through collaborative efforts that ensure safe and certain results, reducing risks along the way. Together, we help businesses and individuals succeed and change our communities for the better. WHAT WE HAVE TO OFFER Wells values our employees and is committed to providing a competitive and comprehensive benefits package. Please note that the benefits listed here are for non-union employees. Benefits for union employees are covered under separate collective bargaining agreements which can be obtained through their union business agent or their HR representative. Health, dental and vision insurance Paid premiums for short- and long-term disability, and life insurance Wellness Incentives Paid holidays Flex spending for medical and daycare Health savings account (HSA) 401(k) plan with profit sharing Access to Nice Healthcare Employee Assistance Program Paid Time Off (PTO) Wishbone Pet Insurance Critical Illness Benefit Plan Accident Insurance Plan Voluntary Hospital Indemnity Plan Other benefits include Health and Family Care leave for both union and non-union employees. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools Move parts into position, manually or with hoists or cranes Lay out and examine metal stock or work pieces to be processed to ensure that specifications are met Verify conformance of work pieces to specifications, using squares, rulers, and measuring tapes Tack-weld fitted parts together Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches Locate and mark work piece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications Hammer, chip, and grind work pieces to cut, bend, and straighten metal Set up face blocks, jigs, and fixtures Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components Study engineering drawings and blueprints to determine materials requirements and task sequences Straighten warped or bent parts, using sledges, hand torches or straightening presses. Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers Design and construct templates and fixtures, using hand tools Mark reference points onto floors or face blocks and transpose them to work pieces, using measuring devices, squares, chalk, and soapstone Lift or move materials and finished products, using large cranes EDUCATION, SKILLS, AND ABILITIES REQUIRED Three (3) years welding/fabrication experience required Ability to read blueprints and drawings Ability to use measuring devices, such as calipers, micrometers, tape measures, depth gauges, and fixed gauges PHYSICAL REQUIREMENTS/ ADA ESSENTIAL FUNCTIONS Physically able to lift up to 75 lbs, occasionally Physically able to push, pull, lift, bend, climb, kneel, twist, squat, crawl and use hands/forearms repetitively and frequently Ability to move around for up to 12 hours per day Ability to work from ladders, scaffolding, swing stages and man lifts at various heights frequently WORKING CONDITIONS Moderate to high risk of exposure to unusual elements Moderate to high risk of safety precautions Moderate to high exposure to production environment Wet, hot, humid, and wintry conditions (weather related) (plant specific) Ability to work outside year-round (plant specific) This position profile identifies the key responsibilities and expectations for performance. It cannot encompass all specific job tasks that an employee may be required to perform. Employees are required to follow any other job-related instructions and perform job-related duties as may be assigned by his/her supervisor. Wells is an Equal Opportunity Employer, including Veterans and Individuals with Disabilities. Wells participates in E-Verify and will provide the federal government with your I-9 Form information to confirm you are authorized to work in the U.S. #LI-JE1

Job Description JOB FUNCTION: To complete any and all types of welding repairs related to the maintenance of the equipment, as well as the fabricating, and assisting in the design of new tooling and equipment. ESSENTIAL FUNCTIONS: 1. Ability to read blueprints and design according to those prints neatly and accurately. 2. Operate mig welder (both aluminum and stainless), tig welder, AC/DC stick welder, oxcyacetelyne outfit for both cutting and welding and plasma cutter. 3. Ability to operate all the above pieces of equipment with little or no help. 4. Operate all the equipment in a safe manner using all the required safety equipment to comply with OSHA and company policies. 5. May be required to travel and work temporarily at fieldwork sites. 6. May be required to work long hours and sometimes holidays. 7. Always willing to help the lesser qualified in problem solving and or operating instructions in using the equipment. 8. Performs other duties as directed. ADDITIONAL RESPONSIBILITIES: 1. Ability to make decision as to what type of material should be used to make certain repairs. 2. Ability to decide when it's safe to weld and when it's not. 3. Always making sure he/she is using the safest method to perform each job. 4. Must be able to determine how to weld/repair equipment in the most effective manner. 5. Must determine safest method of performing job. 6. Will be required to travel to job sites. 7. Must be able to work in reflected heat of welding equipment. QUALIFICATIONS: 1. High School Diploma with specialization in industrial or vocational trades. 2. 2-3 years of technical school, or equivalent job experience preferred. 3. Ability to read blueprints. 4. Specific exposure to an equipment or maintenance environment. 5. Professional oral and written interpersonal communication 6. Certified in Mig/Tig welding on Stainless Steel and Aluminum, vertical up. 7. 3+ years of welding and fabrication experience. PHYSICAL REQUIREMENTS: 1. Ability to move up to 50 Lbs., with or without accommodation. 2. Ability to maintain a consistent workload that involves physical manual labor. 3. Ability to maintain alertness and fitness for duty. 4. Ability to position oneself for work conducted in and around confined spaces. 5. Ability to wear respirators in environments that may expose you to chemicals, fumes, etc. 6. Ability to maintain workloads that may include travel to a variety of states for days or weeks, and daily timeframes that could exceed the typical 8-hour shift.

Job Description JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. **THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS** **MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS** Benefits for Experienced Millwrights, Welders, Fabricators: Perdiem/hotel Health, Dental, Vision Paid Time Off 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: Follow instructions from supervisors and/or crew foremen while maintaining all safety standards Perform various physical duties assigned Move, secure, install, build, load and/or unload materials, tools and equipment Welding and fabrication for repairs and install of plant equipment, chutes and crushers Properly repair and install mechanical parts for equipment Read schematics and instruction manuals to make equipment repairs if needed Stick Weld and use Oxy/Act torches safely and efficiently Use hand tools and power tools safely and efficiently Clean/prepare job site Assist skilled tradespeople in their duties Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: Must be 18 or older Ability to routinely climb stairs, ladders and/or platforms, bend and squat Ability to walk, stand or sit for prolonged periods of time Ability to consistently lift and/or move up to 50 pounds throughout the shift Able to work any shifts, including overtime, weekends and holidays required. Ability to pass background and drug & alcohol testing required. MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under the direction and supervision of the Department Production Superintendent and in cooperation with the Foreman and Bay Coordinator, weld metal components with welding equipment to fit and join, fabricate, and/or repair heavy and large mechanical products per specifications and in accordance with the production schedule. Key Deliverables • Adhere to all safety rules and perform work at a quality level • Read and understand assigned blueprints prior to starting a project. • Participate in process and product development and improvement programs. • Accurately inspect metal prior to welding to ensure clean welds. • Perform grinding operations that comply with Astec's standards Key Activities & Responsibilities • Welders are responsible for the layout of plant equipment for welding to ensure proper welding of metal parts. • Must be able to safely perform gang-welding techniques (do's and don'ts). • Must be able to safely weld vertical, flat, and overhead with both MiG and stick. • Must inspect metal prior to welding for smoothness and acceptability and clean welds to presentable state (grinding operations). • Successful completion of Permit Required Confined Space Entry training is needed. • Must work with Fitters on proper assembly of equipment. • Inspect welds for quality and proper weld. • Keep work area clean and neat. • Ensure welding machine settings are appropriate for work to be performed • Must be able to safely use cranes and forklifts. • Must be trained in and know PPE requirements for welding including hood and filter shades and arm/body protection. • Must be able to read and understand weld symbols. • Must select proper rods or wires to perform the welding job. • Must test all hot oil piping for leaks and repairs as necessary. Repairs would be welding related repairs. Inspection includes the safe use of air hose, pressure regulator, and squirt bottle. • Must maintain welding machines by keeping them clean and changing liners in the welding guns. • Follows company policies and procedures at all times. • Follows proper safety rules and procedures at all times. To be successful in this role, your experience and competencies are: • High School Diploma or GED required. • Trade school or community college course work preferred. • 5+ years of experience with heavy equipment production line welding. • MUST be able to pass a 6G TIG Test. • Must be able to read a tape measure. • Performs 4 or more critical or difficult tasks using independent judgement. • Computer experience desired, particularly the ability to use a mouse and locate and open/close programs/files. • Knowledge and ability to perform all Grinder tasks required. • Ability to properly and safely MiG weld, stick weld, and arc gouging required. • Ability to read and understand weld symbols required. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers • Honesty and integrity in all aspects of business • Respect for all individuals • Preserving entrepreneurial spirit and innovation • Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Fort Defiance Industries (FDI) Job Title: TIG Welder Reports to: VP of Operations Job Classification: Non-Exempt Travel Required: None Loudon, TN-based Fort Defiance Industries (FDI) is a growing engineering and manufacturing company. FDI is seeking a TIG Welder to support the production of existing products. Position Summary: The TIG Welder lays out, fits, and TIG welds steel and aluminum components to fabricate frames, pressure vessel, and miscellaneous assemblies according to company specifications performing the following job functions: Key Responsibilities: Analyzes and understands engineering drawings, specifications, and instructions Fits and positions parts in accordance with drawing specification, positions and secures holding devices and tack welds as necessary Prepares weld surfaces by cleaning, brushing, heating as appropriate for the application. Sets up and operates metal arc welding equipment selecting appropriate Sets current, gas pressures, and regulates pressure controls to obtain optimal arc and weld quality Maintain proper torch angle and technique to optimize weld quality Uses care to lay a smooth bead to obtain proper penetration and fusion, avoids burning or distortion of metal, detects defective material, unusual conditions or operating difficulties Cleans and finishes weld surfaces as needed Welds in multiple positions including flat, vertical or horizontal Assists other welders in fitting and positioning parts Maintains equipment and work area in a clean and orderly condition Maintains a continuous improvement mindset and seeks to incorporate best practices to improve weld quality and overall skill set. Other duties and responsibilities as assigned Competencies Attention to detail Reading and understanding visual and written work instructions Communication within a team and between departments Technically minded Innovative/Continuous Improvement mentality Safety oriented Adaptable Can perform tasks with minimal supervision Team player Knowledge of applicable ASME Code Requirements Knowledge of applicable ISO requirements Working Conditions This work is performed in a manufacturing environment with occasional exposure to noise levels up to 110 decibels. The job requires the ability to both sit and stand for long periods of time. The employee will frequently lift and move up to 50 pounds. Physical Abilities Arm-Hand Steadiness: The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position. Manual Dexterity: The ability to quickly move your hand, your hand together with your arm or your two hands to grasp, manipulate , or assembly objects. Near Vision: The ability to see details at close range (within a few feed of the observer). Extent Flexibility: The ability to bend, stretch, twist, or reach with your body arms and/or legs. Information Ordering: The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patters of numbers, letters, words, pictures, mathematical operations). Wrist-Finger Speed: The ability to make fast, simple, repeated movements of the fingers, hands, and wrists. Multilimb Coordination: The ability to coordinate two or more limbs (for example: two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion. Control Precision: The ability to quickly and repeatedly adjust the controls of a machine or to exact positions. Visualization: The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged. Handling and Moving Objects: The ability to using hands, arms and legs in handling, installing, positioning, lifting and moving materials/equipment - up to 50 lbs. Performing General Physical Activities: The ability to perform physical activities that require considerable use of your arms and legs and moving your whole body, such as lifting, balancing, walking, stooping, and handling of materials. Machinery/Equipment/Tools TIG Welder with Foot Pedal Regular use of standard measurement tools Benefits: FDI offers a Great Company Culture, Vacation, Holidays, Medical, Dental, and Vision Insurances along with company provided Life Insurance and Disability Benefits FDI is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. EEO/AA/M/F/disability/veteran

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Job Description BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under the direction and supervision of the Department Production Superintendent and in cooperation with the Foreman and Bay Coordinator, weld metal components with welding equipment to fit and join, fabricate, and/or repair heavy and large mechanical products per specifications and in accordance with the production schedule. Key Deliverables • Adhere to all safety rules and perform work at a quality level • Read and understand assigned blueprints prior to starting a project. • Participate in process and product development and improvement programs. • Accurately inspect metal prior to welding to ensure clean welds. • Perform grinding operations that comply with Astec's standards Key Activities & Responsibilities • Welders are responsible for the layout of plant equipment for welding to ensure proper welding of metal parts. • Must be able to safely perform gang-welding techniques (do's and don'ts). • Must be able to safely weld vertical, flat, and overhead with both MiG and stick. • Must inspect metal prior to welding for smoothness and acceptability and clean welds to presentable state (grinding operations). • Successful completion of Permit Required Confined Space Entry training is needed. • Must work with Fitters on proper assembly of equipment. • Inspect welds for quality and proper weld. • Keep work area clean and neat. • Ensure welding machine settings are appropriate for work to be performed • Must be able to safely use cranes and forklifts. • Must be trained in and know PPE requirements for welding including hood and filter shades and arm/body protection. • Must be able to read and understand weld symbols. • Must select proper rods or wires to perform the welding job. • Must test all hot oil piping for leaks and repairs as necessary. Repairs would be welding related repairs. Inspection includes the safe use of air hose, pressure regulator, and squirt bottle. • Must maintain welding machines by keeping them clean and changing liners in the welding guns. • Follows company policies and procedures at all times. • Follows proper safety rules and procedures at all times. To be successful in this role, your experience and competencies are: • High School Diploma or GED required. • Trade school or community college course work preferred. • 5+ years of experience with heavy equipment production line welding. • MUST be able to pass a 6G TIG Test. • Must be able to read a tape measure. • Performs 4 or more critical or difficult tasks using independent judgement. • Computer experience desired, particularly the ability to use a mouse and locate and open/close programs/files. • Knowledge and ability to perform all Grinder tasks required. • Ability to properly and safely MiG weld, stick weld, and arc gouging required. • Ability to read and understand weld symbols required. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. • Continuous devotion to meeting the needs of our customers • Honesty and integrity in all aspects of business • Respect for all individuals • Preserving entrepreneurial spirit and innovation • Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Job DescriptionCDR General Services is seeking a Class A Welder to join our team near Wickliffe, Kentucky, with experience working in barge repair. The ideal candidate for this position will be a motivated individual with strong work ethics, problem-solving abilities, and a commitment to providing results in a fast-paced environment. Job DetailsJob Type: Full-TimeJob Location: Wickliffe, KYPay Rate: $27 per hour Schedule: Monday - Friday, 2:30 PM - 10:00 PM Key Responsibilities· Perform high-quality welding on barges during repair and maintenance projects· Weld structural components including plates, frames, stiffeners, and bulkheads· Read and interpret blueprints, sketches, and welding symbols· Perform Flux Core (FCAW) and Stick welding (SMAW) using 6010, 6011, and 7018 electrodes· Work with stainless steel and carbon steel materials as required· Work closely with fitters and supervisors to ensure proper alignment and weld quality· Inspect welds to ensure compliance with specifications and quality standards· Operate welding equipment, torches, grinders, and other tools safely· Follow all safety procedures and maintain a clean, organized work area· Complete work efficiently while meeting production schedules Qualifications· Minimum of 2+ years of experience as a Class A Welder required· 2+ years of experience in barge repair or marine welding required· Proficient in Flux Core (FCAW) and Stick welding (SMAW)· Experience welding with 6010, 6011, and 7018 electrodes· Familiarity with stainless steel welding and fabrication· Ability to read and interpret blueprints, welding symbols, and technical drawings· Strong knowledge of welding structural steel in a marine environment· Ability to work independently and as part of a team· Strong attention to detail and commitment to quality workmanship· Ability to work in a fast-paced, industrial environment· Must be able to stand, bend, lift, and work in confined spaces as required

Luttrell Staffing Group is hiring MIG (TIG Welding is a Plus) Welders.Perks & Benefits: Monday-Thursday | 6am-4:30pm (Overtime as needed, including Fridays) Full-Time | Temp-to-Hire Pay Rate $16/Hour **While performing the duties of this job, the employee is frequently exposed to hot/cold temperatures and concrete floors**Job Duties: Perform typical MIG weld operations including: set up welding equipment, weld according to blueprints, clamp, grind, tack-weld, or bolt components into position before welding and inspect final products for quality standards Detect and report defective or questionable materials to the supervisor Troubleshoot issues with welding equipment Perform assigned work to time standards and quality expectations Maintain a clean and tidy work environment Follow safety rules Other duties as needed Job Requirements: High School Diploma or GED MIG (TIG welding is a plus) welding experience Ability to read and interpret blueprints with welding symbols Ability to lift up to 40 pounds Good attention to detail Ability to stand for duration of shift Ability to lift up to 40 lbs Ability to stoop, bend, squat, twist, kneel and reach If you have the experience and skills we're looking for, apply to Luttrell Staffing today! Call or text (423) 638-7614. Luttrell Staffing Group is an equal-opportunity employer. #HMGDNS

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR hhj WwRqrG5