Welder jobs in Corpus Christi, TX

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Combination Welders must have industrial welding experience in a petrochemical or related industrial fabrication facility. Welders having the ability to read and interpret blueprints, ISO's, field drawings, and material takeoffs a plus. Welders will perform a range of duties which will include but is not limited to welding various metals using processes such as SMAW, GMAW, FCAW, and GTAW. Welders are responsible for selecting, setting up, and staging the proper equipment for their jobs and that each are in ample supply and working order. This includes welding machines, gases, tools, and other consumables. Welders are also responsible for double checking the fit of pipe or other structural pieces and to allow for proper attachment. Attention to safety and detail are of the utmost importance. Welders must successfully pass pre-employment weld tests as part of the on-boarding process. Requirements Industrial Combo welding experience with GTAW and SMAW. Must pass GTAW & SMAW manual welding procedures test. Current Basic Orientation Plus (Safety Council Card) or within 3 months expiration. Current TWIC card Have three (3) or more years' experience in your craft. Compliance with designated welding procedures and specifications. Follow established job-site safety and work regulations, as well as maintaining a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code. Produce quality work, meeting requirements of plans, specifications and industry standards. Physical Requirements Significant and sustained periods of standing, walking, bending, squatting and lifting. Good communication skills (speaking and actively listening) with co-workers and supervisors. Must have good manual dexterity to perform precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Welder - Combination This person must be able to join metal parts, such as pipe or metal plates as specified by layout, blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: * Uses spot welding gun or hand, electric, or gas welding equipment to weld or tack weld pieces together. * Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. * Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. * Preheats work pieces for the preparation of welding or curving, using torch. * Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. * Checks the weakness of work pieces and measures work pieces with straightedge or template to ensure the piece meets specifications. * Climbs up ladders or works on scaffolds to take apart textures. * Gives signal to crane operator to lift large work pieces. * Uses thermal-cutting equipment such as flame-cutting torch or plasma-arc equipment to dismount metal assemblies or cut scrap metal. * Uses hoist, crane, wire and banding machine, or hand tools to place and protect work pieces. * In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. * Instructs and brings flame or electrodes on or across work piece to straighten, curve, dissolve, or develop metal. * Joins pieces together, covers up taut points, and adds metal to develop parts. * Other duties as assigned. * Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Qualifications Required for this Position: Education - no minimum education requirements. Experience - 3-5 years of Journeyman level experience. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Benefits & Compensation We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to ********************************************************** Austin Industrial is an Equal Opportunity Employer. See the "Know Your Rights" poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at **************.

Welder - Combination This person must be able to join metal parts, such as pipe or metal plates as specified by layout, blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: Uses spot welding gun or hand, electric, or gas welding equipment to weld or tack weld pieces together. Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. Preheats work pieces for the preparation of welding or curving, using torch. Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. Checks the weakness of work pieces and measures work pieces with straightedge or template to ensure the piece meets specifications. Climbs up ladders or works on scaffolds to take apart textures. Gives signal to crane operator to lift large work pieces. Uses thermal-cutting equipment such as flame-cutting torch or plasma-arc equipment to dismount metal assemblies or cut scrap metal. Uses hoist, crane, wire and banding machine, or hand tools to place and protect work pieces. In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. Instructs and brings flame or electrodes on or across work piece to straighten, curve, dissolve, or develop metal. Joins pieces together, covers up taut points, and adds metal to develop parts. Other duties as assigned. Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Qualifications Required for this Position: Education - no minimum education requirements. Experience - 3-5 years of Journeyman level experience. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Benefits & Compensation We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to https://www.austin-ind.com/our-company/100-employee-owned. Austin Industrial is an Equal Opportunity Employer. See the “Know Your Rights” poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit https://www.austin-ind.com/what-we-do/industrial No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( i.e. , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at (877) 831-1217.

Currently seeking Experienced Combo Ship Fitter/Welder to work in Corpus Christi, Texas. To be considered for this Welder / Fitter opportunity, you must have at least 5 years of experience. REQUIREMENTS: Candidates must meet the required experience to be considered Must be able to pass hands-on skills tests. Must pass drug test and E-Verify. Personal Protective Equipment: Hard Hat, Steel Toe Safety Boots, Safety Glasses, Gloves ESSENTIAL JOB FUNCTIONS: Must have knowledge of equipment, work processes, and techniques used for this role including the ability to perform all functions of the position in conformity with applicable regulations and generally observed safety practices. Enter and move through manholes to reach and work in internally confined spaces. Manipulate and transport loads up to 50 pounds over distances of up to 200 feet approximately 1 to 6 times during each 8 hour shift, occasionally 75 pounds. Manipulate and operate all machines and tools essential to the performance of the position of Welder / Fitter. Traverse gangways and scaffolding at varying heights. Traverse and negotiate uneven surfaces and uneven heights between dock and vessel. Stooping, squatting, twisting, kneeling, lifting, and reaching. BENEFITS: A limited benefit plan is available to Hutco, Inc. employees through Essential Staff Care. Available plans include: Medical / Prescription Dental Coverage Vision Coverage Short Term Disability Benefits Term Life Benefits Accidental Death & Dismemberment Benefit CONTACT HUTCO TODAY! Send resumes to: ********************* Apply Online Or call Fred Cumpian - ************** Se habla Español Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (956)382-2631 / (281)965-2749 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description No teaching experience required, we will provide all necessary tools and training to succeed!! We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; Modifies instructional methods and strategies to meet diverse students' needs; Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements Minimum of 3 years of industry experience preferred; Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; Certified AWS and/or NCCER. Benefits Training & Development Fun & Energetic, Family-Based Environment Continuous Growth Opportunities Medical, Dental, & Vision Options Health Savings & Flexible Spending Options (HSA & FSA) Basic Life & Accident Insurance Short & Long-term Disability 401K Retirement Plan SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Job Description Pipe Welder 1st Class Project Details: Pipe Welder Shop and ships Essential Duties and Responsibilities: Other duties may be assigned. A welder must understand welding procedures and parameters. Can comprehend and utilize blueprints, sketches, drawings, technical. Manuals, gouge, and work process instruction. Welds steel plates and pipes in the repair and/or construction of marine vessels, industrial components, and associated equipment. Have the skills to use various types of welding equipment for different types of metal. Welds components in a flat, vertical, or overhead position. Performs related tasks such as cutting and grinding. Repairs broken or cracked parts, fills holes, and increases the size of metal parts. Welds metal parts together using gas welding, brazing, arc welding, wire fed welding, or tig welding process and procedures. Highly skilled welders often are trained to work with a wide variety of materials, such as titanium, aluminum, or exotic metals, in addition to steel. Select and set up welding equipment, execute the planned welds, and examine the welds to ensure that they meet standards or specifications. Required Education & Experience: High School Diploma, some college or technical school certification, six months to one year(s) experience or equivalent combination of education and experience. Must pass an ABS, or ASME weld test. Working Conditions: Open-air conditions such as noisy, hot, cold, etc. Must be able to stand and operate equipment for up to four continuous hours. You must wear hearing, eye, head protection and proper PPE. Some climbing (100 feet or higher) and lifting (50 lbs.) involved. Working with hot and sometimes hazardous materials. Work on inland and offshore barges or in industrial settings. Enter round manholes with inside diameters of 18”, and other internally confined spaces. Traverse gangways and scaffolding at varying heights. Necessary Equipment Operation: Blow torches- Motorized cutting torches; Pattern cutting torches; Welding torches. Gas welding, brazing, or cutting apparatus- Brazing equipment; Heliarc welding equipment; Oxyacetylene equipment; Portable gas operated arc welders. Manlift or personnel lift- hydraulic truck lifts; Swing stages Welding masks- Hand shields; Welding shields. Special Skills: Ability to work under deadlines and schedule pressures. Ability to read and interpret blueprints, sketches, drawings, and technical manuals. Excellent interpersonal and communication skills. High performance and a strong team player. Commitment to company values and safety program. Welder Position Basic Requirements: Qualifications of class - Class will be based upon judgment by quality control and/or production management in terms of the quality and productivity of the welds. Plate Welder 2nd Class (PLW2) - Welder capable of welding SMAW or FCAW on plate/structural with ABS Q2+4G or ASME or AWS plate test (2G+3G+4G). Plate Welder 1st Class (PLW1) - Welder capable of welding SMAW & FCAW on plate/structural with ABS Q2+4G or ASME or AWS plate test (2G+3G+4G). Pipe Welder 2nd Class (PPW2) - Welder capable of welding SMAW or FCAW on plate/structural &SMAW or FCAW on pipe with ABS Q3 or AWS 6g pipe test. Pipe Welder 1st Class (PPW1) - Welder capable of welding SMAW & FCAW and or GTAW on pipe. Must Pass ABS Q3 or ASME 6G or AWS 6G pipe test. Combination Welder 1st Class- Pipe/Plate/Structural (PPLW)- Welder capable of process / structural pipe and plate welding using GTAW+FCAW and or GTAW+SMAW. Combination Welder 2nd Class- Pipe/Plate/Structural (PPLW)- Welder capable of process / structural pipe and plate welding using GTAW+FCAW and or GTAW+SMAW. the individual responsibility of every employee to maintain a current awareness and understanding of appropriate regulations, internal policies and procedures, and to comply fully with those regulations, policies and procedures. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity Posters. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email: *********************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail: *********************. The statements herein are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as a comprehensive list of all responsibilities, duties, and skills required of assigned personnel. Powered by JazzHR e6xuCLrAxC

No teaching experience required, we will provide all necessary tools and training to succeed!! We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities * Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; * Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; * Modifies instructional methods and strategies to meet diverse students' needs; * Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; * Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements * Minimum of 3 years of industry experience preferred; * Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; * Certified AWS and/or NCCER. Benefits * Training & Development * Fun & Energetic, Family-Based Environment * Continuous Growth Opportunities * Medical, Dental, & Vision Options * Health Savings & Flexible Spending Options (HSA & FSA) * Basic Life & Accident Insurance * Short & Long-term Disability * 401K Retirement Plan * SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Welder - Combination This person must be able to join metal parts, such as pipe or metal plates as specified by layout, blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: + Uses spot welding gun or hand, electric, or gas welding equipment to weld or tack weld pieces together. + Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. + Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. + Preheats work pieces for the preparation of welding or curving, using torch. + Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. + Checks the weakness of work pieces and measures work pieces with straightedge or template to ensure the piece meets specifications. + Climbs up ladders or works on scaffolds to take apart textures. + Gives signal to crane operator to lift large work pieces. + Uses thermal-cutting equipment such as flame-cutting torch or plasma-arc equipment to dismount metal assemblies or cut scrap metal. + Uses hoist, crane, wire and banding machine, or hand tools to place and protect work pieces. + In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. + Instructs and brings flame or electrodes on or across work piece to straighten, curve, dissolve, or develop metal. + Joins pieces together, covers up taut points, and adds metal to develop parts. + Other duties as assigned. + Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Qualifications Required for this Position: **Education** - no minimum education requirements. **Experience** - 3-5 years of Journeyman level experience. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **About Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Licenses & Certifications** **Required** + Valid Driver's License **Experience** **Required** + 4 years: Industrial Combo Welder Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Combination Welders must have industrial welding experience in a petrochemical or related industrial fabrication facility. Welders having the ability to read and interpret blueprints, ISO's, field drawings, and material takeoffs a plus. Welders will perform a range of duties which will include but is not limited to welding various metals using processes such as SMAW, GMAW, FCAW, and GTAW. Welders are responsible for selecting, setting up, and staging the proper equipment for their jobs and that each are in ample supply and working order. This includes welding machines, gases, tools, and other consumables. Welders are also responsible for double checking the fit of pipe or other structural pieces and to allow for proper attachment. Attention to safety and detail are of the utmost importance. Welders must successfully pass pre-employment weld tests as part of the on-boarding process. Requirements * Industrial Combo welding experience with GTAW and SMAW. * Must pass GTAW & SMAW manual welding procedures test. * Current Basic Orientation Plus (Safety Council Card) or within 3 months expiration. * Current TWIC card * Have three (3) or more years' experience in your craft. * Compliance with designated welding procedures and specifications. * Follow established job-site safety and work regulations, as well as maintaining a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. * Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code. * Produce quality work, meeting requirements of plans, specifications and industry standards. Physical Requirements * Significant and sustained periods of standing, walking, bending, squatting and lifting. * Good communication skills (speaking and actively listening) with co-workers and supervisors. * Must have good manual dexterity to perform precision adjustments of machinery parts and controls. * Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. * Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. * Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

OFS Facility Operations | Sub Arc Welder Force Pressure Control is seeking safety-oriented production personnel to work in its Orange Grove facility. Welding personnel must be able to operate with and without supervision, prepare and initiate jobs, maintain machinery and working production area, and record all data outlined in QAQC protocols. Three years working experience within sub arc work scopes is required as is working experience with alloys and API ring grooves. Working background with valve and other wellhead / surface pressure control equipment is valued. Candidates must be able to successfully pass bend test The Sub Arc Welder position is a full time, non-exempt position. Overtime in excess of 40 hours per work week will be required. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws.

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Combination Welders must have industrial welding experience in a petrochemical or related industrial fabrication facility. Welders having the ability to read and interpret blueprints, ISO's, field drawings, and material takeoffs a plus. Welders will perform a range of duties which will include but is not limited to welding various metals using processes such as SMAW, GMAW, FCAW, and GTAW. Welders are responsible for selecting, setting up, and staging the proper equipment for their jobs and that each are in ample supply and working order. This includes welding machines, gases, tools, and other consumables. Welders are also responsible for double checking the fit of pipe or other structural pieces and to allow for proper attachment. Attention to safety and detail are of the utmost importance. Welders must successfully pass pre-employment weld tests as part of the on-boarding process. Requirements Industrial Combo welding experience with GTAW and SMAW. Must pass GTAW & SMAW manual welding procedures test. Current Basic Orientation Plus (Safety Council Card) or within 3 months expiration. Current TWIC card Have three (3) or more years' experience in your craft. Compliance with designated welding procedures and specifications. Follow established job-site safety and work regulations, as well as maintaining a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code. Produce quality work, meeting requirements of plans, specifications and industry standards. Physical Requirements Significant and sustained periods of standing, walking, bending, squatting and lifting. Good communication skills (speaking and actively listening) with co-workers and supervisors. Must have good manual dexterity to perform precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Job Description No teaching experience required, we will provide all necessary tools and training to succeed!! Full and part-time available We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; Modifies instructional methods and strategies to meet diverse students' needs; Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements Minimum of 3 years of industry experience preferred; Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; Certified AWS and/or NCCER. Benefits Training & Development Fun & Energetic, Family-Based Environment Continuous Growth Opportunities Medical, Dental, & Vision Options Health Savings & Flexible Spending Options (HSA & FSA) Basic Life & Accident Insurance Short & Long-term Disability 401K Retirement Plan SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Project Details: Pipe Welder Shop and ships Essential Duties and Responsibilities: Other duties may be assigned. A welder must understand welding procedures and parameters. Can comprehend and utilize blueprints, sketches, drawings, technical. Manuals, gouge, and work process instruction. Welds steel plates and pipes in the repair and/or construction of marine vessels, industrial components, and associated equipment. Have the skills to use various types of welding equipment for different types of metal. Welds components in a flat, vertical, or overhead position. Performs related tasks such as cutting and grinding. Repairs broken or cracked parts, fills holes, and increases the size of metal parts. Welds metal parts together using gas welding, brazing, arc welding, wire fed welding, or tig welding process and procedures. Highly skilled welders often are trained to work with a wide variety of materials, such as titanium, aluminum, or exotic metals, in addition to steel. Select and set up welding equipment, execute the planned welds, and examine the welds to ensure that they meet standards or specifications. Required Education & Experience: High School Diploma, some college or technical school certification, six months to one year(s) experience or equivalent combination of education and experience. Must pass an ABS, or ASME weld test. Working Conditions: Open-air conditions such as noisy, hot, cold, etc. Must be able to stand and operate equipment for up to four continuous hours. You must wear hearing, eye, head protection and proper PPE. Some climbing (100 feet or higher) and lifting (50 lbs.) involved. Working with hot and sometimes hazardous materials. Work on inland and offshore barges or in industrial settings. Enter round manholes with inside diameters of 18”, and other internally confined spaces. Traverse gangways and scaffolding at varying heights. Necessary Equipment Operation: Blow torches- Motorized cutting torches; Pattern cutting torches; Welding torches. Gas welding, brazing, or cutting apparatus- Brazing equipment; Heliarc welding equipment; Oxyacetylene equipment; Portable gas operated arc welders. Manlift or personnel lift- hydraulic truck lifts; Swing stages Welding masks- Hand shields; Welding shields. Special Skills: Ability to work under deadlines and schedule pressures. Ability to read and interpret blueprints, sketches, drawings, and technical manuals. Excellent interpersonal and communication skills. High performance and a strong team player. Commitment to company values and safety program. Welder Position Basic Requirements: Qualifications of class - Class will be based upon judgment by quality control and/or production management in terms of the quality and productivity of the welds. Plate Welder 2nd Class (PLW2) - Welder capable of welding SMAW or FCAW on plate/structural with ABS Q2+4G or ASME or AWS plate test (2G+3G+4G). Plate Welder 1st Class (PLW1) - Welder capable of welding SMAW & FCAW on plate/structural with ABS Q2+4G or ASME or AWS plate test (2G+3G+4G). Pipe Welder 2nd Class (PPW2) - Welder capable of welding SMAW or FCAW on plate/structural &SMAW or FCAW on pipe with ABS Q3 or AWS 6g pipe test. Pipe Welder 1st Class (PPW1) - Welder capable of welding SMAW & FCAW and or GTAW on pipe. Must Pass ABS Q3 or ASME 6G or AWS 6G pipe test. Combination Welder 1st Class- Pipe/Plate/Structural (PPLW)- Welder capable of process / structural pipe and plate welding using GTAW+FCAW and or GTAW+SMAW. Combination Welder 2nd Class- Pipe/Plate/Structural (PPLW)- Welder capable of process / structural pipe and plate welding using GTAW+FCAW and or GTAW+SMAW. the individual responsibility of every employee to maintain a current awareness and understanding of appropriate regulations, internal policies and procedures, and to comply fully with those regulations, policies and procedures. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity Posters. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email: [email protected]. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail: [email protected]. The statements herein are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as a comprehensive list of all responsibilities, duties, and skills required of assigned personnel.

Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 ; (956)247-2467 ; (281)965-2749 *Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 20005 State Highway 48 Brownsville, TX 78521 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence. 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention. 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) 4. Must be able to effectively confer job related information to the supervisor. 5. Must understand SMAW, FCAW, and GMAW. 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal) • FCAW Full Penetration weld with permanent backing (ceramic and metal) • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals. 8. Must possess a working knowledge of welding equipment and work processes used in marine welding. 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work. 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. 11. Must understand the US customary and metric measurement system. 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks. 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. . 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. 4. Work shifts and overtime as assigned. 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and shipyards best safety practices. 6. Keep your work area clean and safe at all times, especially at the end of the shift. 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day). 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day). 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps). 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles. 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day). 9. Respond to visual, verbal, and audible sounds/commands. 10. Work at heights above 12' from ladders, scaffolding, and manlifts. 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Combination Welders must have industrial welding experience in a petrochemical or related industrial fabrication facility. Welders having the ability to read and interpret blueprints, ISO's, field drawings, and material takeoffs a plus. Welders will perform a range of duties which will include but is not limited to welding various metals using processes such as SMAW, GMAW, FCAW, and GTAW. Welders are responsible for selecting, setting up, and staging the proper equipment for their jobs and that each are in ample supply and working order. This includes welding machines, gases, tools, and other consumables. Welders are also responsible for double checking the fit of pipe or other structural pieces and to allow for proper attachment. Attention to safety and detail are of the utmost importance. Welders must successfully pass pre-employment weld tests as part of the on-boarding process. Requirements * Industrial Combo welding experience with GTAW and SMAW. * Must pass GTAW & SMAW manual welding procedures test. * Current Basic Orientation Plus (Safety Council Card) or within 3 months expiration. * Current TWIC card * Have three (3) or more years' experience in your craft. * Compliance with designated welding procedures and specifications. * Follow established job-site safety and work regulations, as well as maintaining a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. * Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code. * Produce quality work, meeting requirements of plans, specifications and industry standards. Physical Requirements * Significant and sustained periods of standing, walking, bending, squatting and lifting. * Good communication skills (speaking and actively listening) with co-workers and supervisors. * Must have good manual dexterity to perform precision adjustments of machinery parts and controls. * Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. * Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. * Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

←Back to all jobs at FORCE PRESSURE CONTROL LLC Sub Arc Welder FORCE PRESSURE CONTROL LLC is an EEO Employer - M/F/Disability/Protected Veteran Status OFS Facility Operations | Sub Arc Welder Force Pressure Control is seeking safety-oriented production personnel to work in its Orange Grove facility. Welding personnel must be able to operate with and without supervision, prepare and initiate jobs, maintain machinery and working production area, and record all data outlined in QAQC protocols. Three years working experience within sub arc work scopes is required as is working experience with alloys and API ring grooves. Working background with valve and other wellhead / surface pressure control equipment is valued. Candidates must be able to successfully pass bend test The Sub Arc Welder position is a full time, non-exempt position. Overtime in excess of 40 hours per work week will be required. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws. Please visit our careers page to see more job opportunities.

**About Us** We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. **Job Summary** Combination Welders must have industrial welding experience in a petrochemical or related industrial fabrication facility. Welders having the ability to read and interpret blueprints, ISO's, field drawings, and material takeoffs a plus. Welders will perform a range of duties which will include but is not limited to welding various metals using processes such as SMAW, GMAW, FCAW, and GTAW. Welders are responsible for selecting, setting up, and staging the proper equipment for their jobs and that each are in ample supply and working order. This includes welding machines, gases, tools, and other consumables. Welders are also responsible for double checking the fit of pipe or other structural pieces and to allow for proper attachment. Attention to safety and detail are of the utmost importance. Welders must successfully pass pre-employment weld tests as part of the on-boarding process. Requirements + Industrial Combo welding experience with GTAW and SMAW. + Must pass GTAW & SMAW manual welding procedures test. + Current Basic Orientation Plus (Safety Council Card) or within 3 months expiration. + Current TWIC card + Have three (3) or more years' experience in your craft. + Compliance with designated welding procedures and specifications. + Follow established job-site safety and work regulations, as well as maintaining a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. + Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code. + Produce quality work, meeting requirements of plans, specifications and industry standards. Physical Requirements + Significant and sustained periods of standing, walking, bending, squatting and lifting. + Good communication skills (speaking and actively listening) with co-workers and supervisors. + Must have good manual dexterity to perform precision adjustments of machinery parts and controls. + Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. + May be required to lift, carry and move up to 50lbs. + Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. + Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. + Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. + Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. **We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled** **Notice to prospective employees:** **There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here (****************************************************************************************************** DateDesc&w=&wc=&we=&wpst=) . Please check our available positions to confirm that a post or email is genuine.** **EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.** **\#REPCON** **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-TX-Corpus Christi_ **ID** _2025-1544_ **Company** _Repcon, Inc._ **Category** _Fabrication_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _2 months ago_ _(10/15/2025 9:43 AM)_

Job DescriptionDescription: OFS Facility Operations | Sub Arc Welder Force Pressure Control is seeking safety-oriented production personnel to work in its Orange Grove facility. Welding personnel must be able to operate with and without supervision, prepare and initiate jobs, maintain machinery and working production area, and record all data outlined in QAQC protocols. Three years working experience within sub arc work scopes is required as is working experience with alloys and API ring grooves. Working background with valve and other wellhead / surface pressure control equipment is valued. Candidates must be able to successfully pass bend test The Sub Arc Welder position is a full time, non-exempt position. Overtime in excess of 40 hours per work week will be required. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws. Requirements: