Welder jobs in Federal Way, WA

Job DescriptionSalary: $34.44/hr Welders are responsible for performing welds in multiple positions using a variety of processes in accordance with NAVSEA-approved procedures, in a safe and efficient manner. Responsibilities include operating, maintaining and troubleshooting welding and cutting equipment, preparing components through precise layout and fitting, and conducting quality inspections. 1st Class Mechanics are expected to independently receive assignments, plan the work, identify material requirements, and execute tasks efficiently and accurately. Duties & Responsibilities Wear required personal protective equipment (PPE) and always adhere to all OSHA safety standards and Tcnico safety policies. Must adhere to all applicable safety, technical, and regulatory guidelines, including but not limited to: Company policies and procedures Local, state, and federal regulations ABS, NAVSEA Standard Items, and MSC GTRs MIL-STD (e.g., 22D, 248, **************, 2035) General Specifications for Overhaul of Ships Perform advanced welding in multiple positions (2G, 3G, 4G, 6G) using various processes (GTAW, GMAW, FCAW, GMAW-P, SMAW) in compliance with NAVSEA-approved procedures and specifications. Conduct quality control checks using precision gauges and ensure all work meets NAVSEA standards; inspect finished welds for defects and conformance. Operate and maintain welding tools and equipment, including manual/semi-automatic systems, hand and power tools, and cutting equipment (e.g., wire feeders, carbon arc rigs, tig rigs, mig/flux core guns CAC-A). Prepare and align components for welding through layout, measuring, beveling, and fitting while monitoring for distortion or heat-related issues. Possess and maintain personal tools/equipment necessary to accomplish their trade. Troubleshoot equipment and material issues, change out wire spools, tips/nozzles or adjust, and notify management when replacements are needed. Must be proficient at reading and interpreting weld symbols on blueprints and drawings. Conduct self-inspections to ensure work meets quality standards and complies with applicable drawings and specifications. Provide guidance and train junior craftsmen, providing direction as a senior mechanic when required. Maintain a good attendance record, demonstrate a positive and professional attitude, work well with others, take pride in your work, and be receptive to constructive feedback from mentors (supervisor, PMT, etc.). Certification Requirements Must be qualified in 3-position SMAW carbon steel plate and 3-position FCAW carbon steel plate. Hold a carbon arcing qualification, plus one additional SMAW certification (not carbon steel) and one additional FCAW plate certification (not carbon steel). Hold a SMAW 110-18 6GT Pipe certification, and either a GMAW-P Aluminum certification or 3 SMAW and 3 FCAW pipe/plate certifications. Experience Requirements 4 - 6 years of experience as a Welder in a shipyard. Other Requirements Must be able to work in various environmental conditions including outdoor weather, heights, confined spaces, loud noise, and exposure to airborne particles or fumes. Must be able to wear a respirator as required for specific tasks and maintain compliance with fit testing and respiratory protection protocols. Regularly required to sit, reach, and use hands for handling or operating tools and equipment. Occasionally required to stoop, bend, squat, crawl, and climb ladders or structures (e.g., masts, tanks, voids). Must be able to lift and move up to 50 lbs. independently and seek assistance for heavier loads. Must be able to pass Drug Screening, Work Ability Screening. Must be able to obtain a Government facility security pass and badges at the various shipyards Tcnico works at (e.g., MHI, BAE, NASSCO, HII). Availability to work overtime, weekends, or travel to alternate worksites when project needs demand. Perform other duties as assigned.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

JOB TITLE: Aluminum Pulse Mig Welder REPORTS TO: Superintendent PAY RANGE: $25.00 - $35.00/hourly DOE The Pulse Mig Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the Pulse Mig process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: Prioritize safety and adhere to quality standards during all aluminum welding operations. Configure welding machines according to job requirements or Welding Procedure Specifications for pulse mig aluminum welding. Utilize personal basic tools and equipment for welding tasks if not provided by the workplace. Perform aluminum welding based on the required Pulse Mig process and parameters. Strictly follow welding procedure specifications for Pulse Mig aluminum welding. Prepare and set up welding cells for serial production runs of aluminum components. Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities. Adhere to all company policies and rules. Demonstrate keen attention to detail and focus on assigned tasks. Comply with safety regulations and maintain high-quality standards. Collaborate with team members to enhance productivity and efficiency. Assist in preparing aluminum products for shipment. Report any hazardous work conditions or practices to the supervisor. Capable of manually lifting raw materials, final products, and packed aluminum items for shipment, weighing up to 60 pounds or using a hoist. SUPERVISORY RESPONSIBILITY None KNOWLEDGE, SKILLS, AND ABILITIES Ability to understand and follow both verbal and written instructions. A willingness to learn and display a dependable work ethic. Knowledge of welding equipment, including proper setup and usage for aluminum pulse mig welding. Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals. Familiarity with the metric system. Capable of standing continuously for extended periods. Willingness to work for 40+ hours per week. EDUCATION AND EXPERIENCE High school graduate or GED 2 years of relevant experience in aluminum welding. Prior experience with aluminum pulse mig is required. WORKING CONDITIONS Work environment involves exposure to various weather conditions, work in confined spaces or heights, prolonged standing and physical exertion as well as frequent bending, stooping and reaching. Noise levels may be moderate to high and may work in close contact with other team members. EQUIPMENT USED Welding equipment and personal protective equipment. REASONABLE ACCOMMODATIONS May be made to enable qualified individuals with disabilities to perform essential job functions.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health • Dental • Vision • Life • LTD • Accident • Critical Illness • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent Pay Range: $28.00 - $36.00 Hourly DOE Job Overview:Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education: High school graduate, or GED Responsibilities: Ensure work is done safely and meets quality standards Set up welding machines based on the job at hand or using a Welding Procedure Specification Must have own basic skill related tools and equipment if not supplied by the workplace Weld steel, aluminum and stainless steel components based on the required weld processes and parameters Adhere to the specific welding procedure specifications Set up welding cells for serial production runs Keep work areas clean and organized and take proper care of all equipment and facilities Follow all company rules and policies Provide a great level of attention to detail and focus on the given task Follow all safety rules and quality standards Work with team members to maximize productivity and efficiency Assist in the preparation of product for shipment Report any unsafe work conditions or practice to supervisor Must be able to lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds) or using a hoist Qualifications: Six months to one-year related experience and/or training Experience with steel, aluminum and/or stainless steel required Experience with SMAW, GTAW and GMAW welding highly preferred Ability to follow instructions given both verbally and in written form Willingness to learn and work to the best of his/her abilities and have a dependable work ethic Knowledge of welding equipment and associated tooling including proper set up and use Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals Familiarity with the metric system Ability to stand continuously for long periods of time Willing to work 40+ hours a week Pass substance abuse testing Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Location Bremerton, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Job Details Lakewood - Lakewood, WA Full Time $25.00 - $30.00 Hourly DayDescription Welder Job Description D.P. Nicoli is currently in need of an experienced Welder in our “blank” location. put your skills to work in welding, cutting, equipment repair, and fabrication. Operate top tools, forklifts, and cranes while tackling challenging projects in a hands-on, fast-paced environment. Job Summary: We're seeking a skilled Welder to support our fabrication and repair operations. This role includes advanced welding and cutting techniques, equipment maintenance, and the safe operation of forklifts and overhead cranes. If you take pride in your craft, enjoy hands-on work, and want to grow with a company that values safety and teamwork, we'd love to connect with you Responsibilities: Carbon Arc Gouging Flame Gouging Plasma Cutting & Gouging Rose Bud Heating Repair Welding Equipment Maintenance / Repair / Assembly Welding Machine Setup Track Torch / Handyauto / Pickle Cutting Port A Power Pressing Forklift and Overhead Crane Operation Heavy Lifting Cleaning Grinding Our Comprehensive Benefits & Perks Employee Stock Ownership Plan (ESOP): Become an owner in the company you help build and secure your financial future. Generous Paid Time Off: Enjoy 2 weeks of paid vacation, 5 paid sick days, and 10 paid holidays, including your birthday! Employer-Paid Insurance: Medical, dental, and vision benefits are covered by the company for the employe Annual Bonus Program: Share in the company's success with an annual bonus. Additional Benefits: 401(k) with company match, disability, and life insurance. Company Provided Apparel: Receive D.P. Nicoli shirts, jackets, and sweatshirts. We Are 100% Employee Owned We are experts in the field of underground excavating, shoring supply and training. D.P. Nicoli, Inc has become a leader in the shoring market by building long-lasting relationships with our customers, supplying the best products for their jobsite safety. To achieve this goal, we hire and train the best possible employees. We look at ourselves as partners with our customers. DPN has strategically established offices located in Woodinville, Seattle, Lakewood, and Spokane, WA; Wilsonville, OR; Boise, ID; and San Jose, South San Francisco, Bay Point, CA, and Salt Lake City, UT. We play more, we pay more, and our employees stay more! D.P. Nicoli is a newly converted employee-owned company. Become an owner of the company you work for and secure your economic future. We are looking for 'Right Fit' candidates that want to work for a company that combines energy, humor, competitiveness and the financial strength to continue growing. We hire people with a strong sense of integrity and team that think on their feet, are quick-witted, passionate and want to have a long career with a private 40-year-old company. Qualifications - Lift up to 65 lbs or more - Ability to work outside in all weather conditions - Ability to kneel, squat, bend and weld in various positions - Ability to wear and use appropriate PPE and perform work safely - Ability to drive forklift is an extra plus - Experienced welder GMAW .035 FCAW .052 SMAW welding process AWSD1.1 certifications not required but preferred

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Material Specialist (Strider) - Technical Glass Products - Snoqualmie, WA Allegion is seeking a Material Strider on our production Welding team to fulfill a full-time position in Snoqualmie, WA at our Technical Glass Products facility. This Material Strider reports to our Welding Supervisor and is responsible for verifying the correct materials and quantities are supplied to the welding team to keep production flowing efficiently and on-time. Schedule: Monday - Friday 6:00 AM - 2:30 PM with opportunities for overtime What You Will Do: * Audit job folders, job carts and staging racks. * Verify hardware is accurately delivered using provided BOM. * Prep all weld joints. * Stage weldments in staging racks. * Stage jobs correctly according to nearest ship dates. * Take the initiative to research and resolve material related problems. * Communicate, monitor, and expedite shortages. * Maintain work areas according to 5S principles daily. * Fulfill assigned specific daily and weekly job assignments as outlined by supervisor that meet departmental and company goals. * Visually inspect materials and follow disposal standard operating process. * Assist in the development of Standard Operating Procedures to support Weld Dept. activities. * Understand and comply with all appropriate safety and work safety regulations. * Continuously maintain a clean work area including the cleanup and disposal of trash, production scrap, and material drop-off. Assist in cleaning common areas. * Other duties as assigned What You Need to Succeed: * Prior manufacturing experience. Prior welding experience or training preferred. * Strong organizational skills with close attention to detail and prioritizing multiple tasks along with meeting deadlines. * Ability to navigate a computer and be trained on ERP system (Microsoft Dynamics 365) * Detail-oriented, accurate, dependable and willing to accept a wide variety of assignments * Good verbal and written communication skills * Follow all safety requirements and keep work area clean and orderly Working Environment While performing the duties of this job, the employee is regularly in an environment where heavy work is required and where moderate to loud noise occurs. The employee is in an assembly plant/warehouse environment that can be dusty. May be working around welding operations. Overhead work may be required. There is a frequent need to stand, stoop, walk, twist, bend, lift and move heavy objects (up to 70 pounds) and occasionally lift and move very heavy objects (up to 100 pounds) and perform other similar actions during the course of the work day. Production aids such as tilting assembly tables, overhead cranes and forklifts can be used for these tasks. Personal protective equipment will be required and provided. In addition, the individual in this job will be working under time pressure and must be able to perform under stress. They must be able to work rapidly for long periods and to communicate and interact with others. They also must be able to perform multiple concurrent tasks, read and comprehend the material they read. The employee must be able to write, and problem solve. 40+ hours per week will typically be necessary to accomplish performance objectives and to provide satisfactory job presence and/or responsiveness What You'll Get from Us: * Immediate health, dental and vision insurance coverage, helping you "be safe, be healthy" * Wellness incentives, such as up to $1000 HSA contributions depending upon participation. * A commitment to your future with a 401K plan, offering a 6% company match and no vesting period * Free on-site fitness facility. * Vanpool & Orca card discounts. * Generous vacation and sick time, accrued through the year. * Tuition Reimbursement opportunities * Employee Discounts through Perks at Work Employment Type: Full-time, hourly non-exempt Compensation: This range is provided by Allegion. Your actual pay will be based on your skills and experiences. * The expected Base Hourly Range: $20.87 - $30.24. The actual compensation will be determined based on experience and other factors permitted by law. Apply Today! Join our team of experts today and help us make tomorrow's world a safer place! We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Material Specialist (Strider) - Technical Glass Products - Snoqualmie, WA Allegion is seeking a Material Strider on our production Welding team to fulfill a full-time position in Snoqualmie, WA at our Technical Glass Products facility. This Material Strider reports to our Welding Supervisor and is responsible for verifying the correct materials and quantities are supplied to the welding team to keep production flowing efficiently and on-time. Schedule: Monday - Friday 6:00 AM - 2:30 PM with opportunities for overtime What You Will Do: Audit job folders, job carts and staging racks. Verify hardware is accurately delivered using provided BOM. Prep all weld joints. Stage weldments in staging racks. Stage jobs correctly according to nearest ship dates. Take the initiative to research and resolve material related problems. Communicate, monitor, and expedite shortages. Maintain work areas according to 5S principles daily. Fulfill assigned specific daily and weekly job assignments as outlined by supervisor that meet departmental and company goals. Visually inspect materials and follow disposal standard operating process. Assist in the development of Standard Operating Procedures to support Weld Dept. activities. Understand and comply with all appropriate safety and work safety regulations. Continuously maintain a clean work area including the cleanup and disposal of trash, production scrap, and material drop-off. Assist in cleaning common areas. Other duties as assigned What You Need to Succeed: Prior manufacturing experience. Prior welding experience or training preferred. Strong organizational skills with close attention to detail and prioritizing multiple tasks along with meeting deadlines. Ability to navigate a computer and be trained on ERP system (Microsoft Dynamics 365) Detail-oriented, accurate, dependable and willing to accept a wide variety of assignments Good verbal and written communication skills Follow all safety requirements and keep work area clean and orderly Working Environment While performing the duties of this job, the employee is regularly in an environment where heavy work is required and where moderate to loud noise occurs. The employee is in an assembly plant/warehouse environment that can be dusty. May be working around welding operations. Overhead work may be required. There is a frequent need to stand, stoop, walk, twist, bend, lift and move heavy objects (up to 70 pounds) and occasionally lift and move very heavy objects (up to 100 pounds) and perform other similar actions during the course of the work day. Production aids such as tilting assembly tables, overhead cranes and forklifts can be used for these tasks. Personal protective equipment will be required and provided. In addition, the individual in this job will be working under time pressure and must be able to perform under stress. They must be able to work rapidly for long periods and to communicate and interact with others. They also must be able to perform multiple concurrent tasks, read and comprehend the material they read. The employee must be able to write, and problem solve. 40+ hours per week will typically be necessary to accomplish performance objectives and to provide satisfactory job presence and/or responsiveness What You'll Get from Us: Immediate health, dental and vision insurance coverage, helping you “be safe, be healthy” Wellness incentives, such as up to $1000 HSA contributions depending upon participation. A commitment to your future with a 401K plan, offering a 6% company match and no vesting period Free on-site fitness facility. Vanpool & Orca card discounts. Generous vacation and sick time, accrued through the year. Tuition Reimbursement opportunities Employee Discounts through Perks at Work Employment Type: Full-time, hourly non-exempt Compensation: This range is provided by Allegion. Your actual pay will be based on your skills and experiences. The expected Base Hourly Range: $20.87 - $30.24. The actual compensation will be determined based on experience and other factors permitted by law. Apply Today! Join our team of experts today and help us make tomorrow's world a safer place! We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. © Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

Join us in supporting Seattle shipyard location with your experience and expertise! This role requires a proactive and detail-oriented professionals to engage in Pipe Fitting/Welding tasks, ensuring excellence in every aspect of the job. Contract Duration: Starts ASAP. Goes 6+ months. Compensation: $32/hr, $150 per diem. Key Requirements: Citizenship: Must be a U.S. Citizen with proof (Original/ Certified Birth Certificate with Enhanced Driver License, Real ID or U.S Passport). Must be able to obtain a "DBIDS" Badge. Certifications- Maritime OSHA 10 certification. Experience- Previous shipyard experience required Working Hours- 40-70 hours per week Scheduling: Diverse shifts include 8-hour, 10-hour, and 12-hour shifts. Monday through Friday with overtime, and weekends as requested by client. Job Description: Venture Dynamics is seeking experienced Pipe Fitters/Welders to join our team within the marine industry. The successful candidate will be responsible for performing pipe fitting and welding tasks according to NAVSEA standards, including torch cutting, pipe cleaning, and welding pipes without leaks in complex positions with minimal clearance. This role demands expertise in TIG welding and a thorough understanding of various welding rods, including 6011, 6010, 7018, and sil-braze rods. Key Responsibilities: - Perform precision pipe welding tasks to ensure leak-free welds in marine environments. - Torch cut, clean, and true pipes for optimal fit and function according to NAVSEA standards. - Assess job sites, particularly those with combustible materials, ensuring safety for all personnel engaged in hot work activities. - Read and interpret weld symbols, blueprints, schematics, and job specifications. - Certify to Navy/ABS standards by passing required vision tests and demonstrating proficiency in pipe welding in the 6GR position, using filters such as 11018, 70s2, 316, RN67, and GTAW. - Conduct x-ray testing to verify the integrity of welds. - Perform basic pipefitting and brazing tasks as required. Qualifications: - Extensive knowledge of TIG welding processes and techniques specific to marine applications. - Proficiency with 6011, 6010, 7018, and/or sil-braze rods. - Ability to pass Navy/ABS certification tests, including vision and welding in 6GR position. - Strong ability to work from blueprints, schematics, and specifications according to NAVSEA standards. - Experience with x-ray testing of welds to ensure structural integrity. Additional Skills (Preferred): - Basic pipefitting and brazing experience is a plus. Additional Responsibilities: - Participate in system upgrades and routine maintenance. - Maintain cleanliness and organization in all work areas. - Perform other related tasks as assigned. Physical Demands: The position is active and requires extensive standing, walking, bending, kneeling, stooping, crawling, climbing, and crouching. Reasonable accommodations may be made for individuals with disabilities to perform the essential functions. EEO Statement: Venture Dynamics/Sound Resource Group is an Equal Opportunity Employer. We are committed to fostering a diverse and inclusive workplace and treat all employees and applicants equally. Embrace the opportunity to grow your career within the shipyard industry, contributing to meaningful projects in a dynamic work environment. Apply your skills where it's needed most! View all jobs at this company

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Performs work under close supervision. Uses Arc welder and electrode rods to perform tack and bead welds, and oxygen/acetylene torch for cutting metals. Operates hand and power tools to grind, bevel, fit metals together, and remove slag. Selects proper electrodes and holders and regulates current and time. Role could be performed by an employee with a high school education plus a welding certification and several years of experience. Compensation Information: 24-27 Hourly ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help You will pass on instructions to members of the work group. You will check and report work progress of the group. You will perform work site inspections. You will receive job or work assignments from welding supervisor. You will check and report work progress of the group including written documentation and shift assist requests. Requirements Help Conditions of employment Must be a US Citizen. Must be determined suitable for federal employment. Must participate in the direct deposit pay program. New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. Males born after 12-31-59 must be registered for Selective Service. This may be a bargaining unit position. You may be required to successfully complete a pre-appointment physical examination. You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing. You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift. Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs. This position may require exposure to high noise levels. This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required. Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: Special Schedules/MS_A143_143_Seattle_Everett_Tacoma,Washington.pdf CA: Special Schedules/AM_A017_017_San_Diego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Schedules/survey-sch/044/044R-06Aug2024.pdf Portsmouth Naval Shipyard: ME: Schedules/survey-sch/087/087R-02Jan2025.pdf CA: Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA: Schedules/survey-sch/140/140R-09Jul2024.pdf PA: Schedules/survey-sch/115/115R-02Jan2025.pdf Trident Refit Facility, Bangor, WA: Special Schedules/MS_A143_143_Seattle_Everett_Tacoma,Washington.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Temporary actions taken under this announcement may be made permanent without further competition. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR jm FvpHLBAl

Everett Ship Repair is the Pacific Northwest Premier Ship Repair Facility. Founded in 2019, Everett Ship Repair offers vast ship repair capabilities from its facility in Everett, Washington, including repair, maintenance, and conversion services for any type of commercial vessels, with focus on commercial workboats and passenger vessels. With the US Navy as our neighbor, it is no secret that we are in aggressive pursuit of earning their business as we grow our footprint, skills, and profile in this market. With impressive dry-docking capacity, and an opportunity to be part of an emerging team of industry veterans and highly skilled tradesmen, ESR strives to continuously improve our repair and construction methods into efficient and reliable processes. We seek tradesmen who share that view, value learning opportunities, and desire an opportunity to apply their skills in our progressive environment. We are now seeking a Structural Welder who will weld structural portions of marine vessels together and perform wire feed and stick welding operations to support fabrication, assembly, subassembly, and final erection of all structural components on marine vessels including hulls, superstructures, masts, pilot house, and engine rooms. What You will Do * Weld out panels, assemblies, modules, and final build of vessels, good housekeeping and safety practices, and completion of assignments in a timely manner. * Weld seams and skip welds, flat, horizontal, vertical, and overhead, for fillet, butt-weld, socket, and mitered joints. * Grind and prep weld seams for tacking, grinding, and final inspection post weld. * Set up and set arc welder for root passes, welding hangers, and repairs * Set up, set, and operate MIG welders for watertight and skip weld patterns * Layout skip weld patterns * Perform Air Arc operations to back gouge welds and remove bad welds * Sub-arc large hull and deck plates * Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools * Prepare metal surfaces, using hand-operated equipment, such as grinders, cutters, or drills. * Set up ventilation and lighting in confined spaces using best shipyard practices * Performs welds on many alloys including but not limited to aluminum, mild steel, stainless steel, and copper nickel. * Complete hundreds of inches of weld during an eight-hour day, with a desired outcome of a quality joint on every weld. * Work as a member of a team demonstrating skills to effectively communicate, adapt, interpret and problem solve. * Always embrace ESR safety culture and practice safe shipyard work practices and housekeeping * Develop and maintain constructive and cooperative working relationships with fellow crew members and supervision * Share your knowledge in the trade with other employees, especially those in learning or apprentice roles * Responsible for safe work practices and housekeeping procedures. * Express ideas concisely and clearly, both orally and in writing. * Perform other tasks as needed that may arise in our exciting work environment

Welder II Purpose: Valkyrie Enterprises is looking for a Welder in our Norfolk, Va office. They will play a key role in welding on Naval Ships. The job is located in Silverdale Washington. Job Description: Read and interpret blueprints, schematics, and rough sketches. Use drawings and specifications to plan welding operations. Ensure that work is in accordance with relevant codes and standards. Must be able to understand and interpret welding symbols IAW MIL-STD 22D. Provide a variety of skilled welding on steel and aluminum plate, shapes, and CS/CuNi/NiCu/SS pipe in the repair of/or alteration of vessels and associated equipment. Locate and mark reference lines, such as center, buttock, and frame lines. Fabricate templates for bending, shaping, and bracing metal structures. Set-up and use of portable burning/heating torches and plasma cutters. Able to work well with others in a team environment. Able to mentor junior welders in drawing interpretation, joint design requirements, specific welding technique (mirror welding) and processes. Able to oversee the progression of junior welder workmanship inspectors. Willing to learn documentation of fit-up, welds and workmanship inspections. Comply with all OSHA, shipyard safety and environmental policies and procedures. May be required to travel to jobsites away from Shipyard and utilize company vehicle. May be required to work more than the standard work week, including weekends Perform Fire watch duties. Qualification: Must have a Highschool diploma or GED. Must have Trade School with 5+ years of experience in the field. Must pass weld qualifications (2G, 3G, & 4G) SMAW (Shielded Metal Arc Welding), Process GMAW (Gas Metal Arc Welding) process. Must meet NAVSEA 248 requirements by passing MIL-STD 1689 T9074-AR-GIB-010-278 Weld Workmanship requirements. Desired Qualifications: Previous welding certification and experience with GMAW Aluminum and SMAW, preferred. Previous brazing experience preferred. Previous TIG experience preferred. Previous FCAW experience preferred. Security Requirements: Must be eligible to obtain and maintain a DoD Secret Security Clearance to access public and private shipyards and Naval installations. Must meet REAL ID requirements for base and travel access. Travel Requirements: Up to 50% travel nationwide to include international travel as needed. May travel to various local shipyards for work. If position requires travel by domestic flight or access to secure federal facilities/military bases, candidate must be able to obtain (by start of position) and maintain appropriate identification credentials, such as REAL ID. (More information regarding REAL ID can be found: *************************** ) Physical Requirements: Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes. May ride ships at sea for extended periods. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. Frequent exposure to noise due to machinery and equipment. Employee is required to operate trucks, forklifts & man-lift. While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl. Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilator. Frequent use of respirator. Valkyrie strictly adheres to a policy of equal employment opportunity. This policy is based on Valkyrie's commitment to hire and retain qualified employees consistent with position requirements; and to seek, employ, promote and treat all employees and applicants for employment without regard to race, color, religious creed, national origin, ancestry, citizenship status, pregnancy, childbirth, physical disability, mental disability, age, military status or protected veteran status, marital status, registered domestic partner or civil union status, gender (including sex stereotyping and gender identity or expression), medical condition, genetic information or sexual orientation or other protected characteristics. Additionally, Valkyrie Enterprises provides a variety of benefits to eligible employees to support your best health, wellness, and future, to include medical/dental/vision options, company paid life and disability insurances, 401(k) with match, education reimbursement, as well as company paid holidays and paid time off (PTO)

JOB TITLE: Aluminum TIG Welder REPORTS TO: Production Superintendent PAY RANGE: $25.00 - $35.00/hourly DOE The Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the GTAW (Gas Tungsten Arc Welding) process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: Prioritize safety and adhere to quality standards during all aluminum welding operations. Configure welding machines according to job requirements or Welding Procedure Specifications for GTAW aluminum welding. Utilize personal basic tools and equipment for welding tasks if not provided by the workplace. Perform aluminum welding based on the required GTAW process and parameters. Strictly follow welding procedure specifications for GTAW aluminum welding. Prepare and set up welding cells for serial production runs of aluminum components. Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities. Adhere to all company policies and rules. Demonstrate keen attention to detail and focus on assigned tasks. Comply with safety regulations and maintain high-quality standards. Collaborate with team members to enhance productivity and efficiency. Assist in preparing aluminum products for shipment. Report any hazardous work conditions or practices to the supervisor. Capable of manually lifting raw materials, final products, and packed aluminum items for shipment, weighing up to 60 pounds or using a hoist. SUPERVISORY RESPONSIBILITY None KNOWLEDGE, SKILLS, AND ABILITIES Ability to understand and follow both verbal and written instructions. A willingness to learn and display a dependable work ethic. Knowledge of welding equipment, including proper setup and usage for aluminum GTAW welding. Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals. Familiarity with the metric system. Capable of standing continuously for extended periods. Willingness to work for 40+ hours per week. EDUCATION AND EXPERIENCE High school graduate or GED Six months to one-year of relevant experience and/or training in aluminum welding. Prior experience with aluminum GTAW welding is essential. WORKING CONDITIONS Work environment involves exposure to various weather conditions, work in confined spaces or heights, prolonged standing and physical exertion as well as frequent bending, stooping and reaching. Noise levels may be moderate to high and may work in close contact with other team members. EQUIPMENT USED Welding equipment and personal protective equipment. REASONABLE ACCOMMODATIONS May be made to enable qualified individuals with disabilities to perform essential job functions.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health • Dental • Vision • Life • LTD • Accident • Critical Illness • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Aluminum TIG Welder REPORTS TO: Production Superintendent PAY RANGE: $25.00 - $35.00/hourly DOE SUMMARY The Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the GTAW (Gas Tungsten Arc Welding) process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: Prioritize safety and adhere to quality standards during all aluminum welding operations. Configure welding machines according to job requirements or Welding Procedure Specifications for GTAW aluminum welding. Utilize personal basic tools and equipment for welding tasks if not provided by the workplace. Perform aluminum welding based on the required GTAW process and parameters. Strictly follow welding procedure specifications for GTAW aluminum welding. Prepare and set up welding cells for serial production runs of aluminum components. Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities. Adhere to all company policies and rules. Demonstrate keen attention to detail and focus on assigned tasks. Comply with safety regulations and maintain high-quality standards. Collaborate with team members to enhance productivity and efficiency. Assist in preparing aluminum products for shipment. Report any hazardous work conditions or practices to the supervisor. Capable of manually lifting raw materials, final products, and packed aluminum items for shipment, weighing up to 60 pounds or using a hoist. SUPERVISORY RESPONSIBILITY None KNOWLEDGE, SKILLS, AND ABILITIES Ability to understand and follow both verbal and written instructions. A willingness to learn and display a dependable work ethic. Knowledge of welding equipment, including proper setup and usage for aluminum GTAW welding. Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals. Familiarity with the metric system. Capable of standing continuously for extended periods. Willingness to work for 40+ hours per week. EDUCATION AND EXPERIENCE High school graduate or GED Six months to one-year of relevant experience and/or training in aluminum welding. Prior experience with aluminum GTAW welding is essential. WORKING CONDITIONS Work environment involves exposure to various weather conditions, work in confined spaces or heights, prolonged standing and physical exertion as well as frequent bending, stooping and reaching. Noise levels may be moderate to high and may work in close contact with other team members. EQUIPMENT USED Welding equipment and personal protective equipment. REASONABLE ACCOMMODATIONS May be made to enable qualified individuals with disabilities to perform essential job functions. Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions. Heat oxygen/propane heating torch. Perform grinding and pick up work as needed. Complete air carbon arc gouging. Properly use fillet and butt gauges. Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material. Requirements Minimum 8 years of naval/commercial welding experience. Successfully pass several tests over a three-week period. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Everett Ship Repair is the Pacific Northwest's Premier Ship Repair Facility. Founded in 2019, Everett Ship Repair "ESR" offers vast ship repair capabilities from its facility in Everett, Washington, for any type of commercial vessels, with focus on commercial workboats and passenger vessels. Together with Nichols Brothers Boat Builders, we are a formidable player in the maritime community of the Pacific Northwest. ESR has built a reputation for high quality ship repair and conversion services since its founding. With the recent addition of Hercules, Puget Sound's largest drydock to its fleet, ESR has expanded its capacity to serve commercial and government vessels across the West Coast. This expansion aligns with ESR's long term strategy to invest in people, infrastructure, and capabilities that sustain the Pacific Northwest's vital maritime industry. We are now seeking a Welding Supervisor, who will oversee our team of skilled journeymen and apprentice welders in performing for structural welding required for our repair and service of a variety of marine vessels and motivate team members to accomplish the work safely, correctly, and efficiently. Weld processes overseen will include wire feed and stick welding operations on steel and aluminum projects involving repair service for vessels as well as facility related projects under his/her supervision. Reporting to the Production Manager, the incumbent will execute the project strategy for the welding scope of work and supervise skilled trades to complete the service project in accordance with all applicable plans, specifications, codes, and industry standards. What You will Do * Provide supervision to assigned employees, including assignment to tasks, assuring completion of tasks within deadlines, resolving conflicts, and motivating optimal performance from department trades and support staff. * Lead and communicate company safety culture and policies. Leads craft safety meetings. Holds employees accountable for demonstrating acceptable safety practices. Provides input to ways to instill attention to safety among all employees. * Work closely with the project managers or ship superintendent for elements in the projects in the supervisor's craft area; handles planning including specifying staffing needs and scheduling, tools, materials, equipment, and subcontracts. * Plan and project manpower requirements to support production/ project management activities. * Coordinate regulatory agency compliance for assigned craft. Assure employees accomplish work in accordance with proper practices and within specifications. * Oversee development of daily work assignments and expectations for production workforce. * Ensure all employees have all the necessary tooling, equipment, specifications, drawings, and procedures to properly accomplish their jobs. * Conduct toolbox meetings. * Ensure through personal inspection and power of example that correct construction procedures are followed, and work is following the plans and specifications. Points out deficiencies, explains and takes corrective action as needed. * Review crew's timecards for correct hours and phase coding and instills processes to assure for timely and accurate submission of work hours at daily and weekly deadlines. * Demonstrate and model behavior supportive of the direction the company is headed; provides meaningful and constructive suggestions for practice improvements; acts as and is a recognized leader among peers. * Assist estimating department as required for bidding work. * Attend daily production meetings and coordinates assignments with other shops * Develop and maintain constructive and cooperative working relationships with fellow crew members and supervision * Share your knowledge in the trade with other employees, especially those in apprentice roles * Supervisory and Leadership duties to include: * Understand and comply with Affirmative Action, EEO, Non-Discrimination, Harassment, and all other HR policies and procedures. * Effectively communicate goals and objectives. * Provide direction and leadership to achieve company Mission and Safety Vision. * Complete and process employee evaluations in a timely manner. * Direct, motivate, and develop employees for maximum performance. * Work with internal QA to assure regulatory agency compliance for assigned craft. Perform or oversee initial quality assurance check for assigned projects * Oversee operation of a variety of welding equipment and processes including arc welding, sub-arc, MIG welding, and Air Arc operations, flat, horizontal, vertical and overhead. * Share your knowledge in the trade with other employees, especially those in learning or apprentice roles.

You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help You will be identifying and associating metals, alloys and filler metal by color code and standard markings. You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests. You will be using test methods for determining metals or alloys. You will be inspecting completed welding projects. You will be using various welding machines and welding processes to weld piping parts or structures. Requirements Help Conditions of employment Must be a US Citizen. Must be determined suitable for federal employment. Must participate in the direct deposit pay program. New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. Males born after 12-31-59 must be registered for Selective Service. This may be a bargaining unit position. You may be required to successfully complete a pre-appointment physical examination. You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing. You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs. This position may require exposure to high noise levels. This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required. Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: Special Schedules/MS_A143_143_Seattle_Everett_Tacoma,Washington.pdf CA: Special Schedules/AM_A017_017_San_Diego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Schedules/survey-sch/044/044R-06Aug2024.pdf Portsmouth Naval Shipyard: ME: Schedules/survey-sch/087/087R-02Jan2025.pdf CA: Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA: Schedules/survey-sch/140/140R-09Jul2024.pdf PA: Schedules/survey-sch/115/115R-02Jan2025.pdf Trident Refit Facility, Bangor, WA: Special Schedules/MS_A143_143_Seattle_Everett_Tacoma,Washington.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.