Welder fitter jobs in Bristol, PA

Welder (FCAW & GTAW) Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com . Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Holtec International offers a competitive benefits package to eligible associates, which includes: Medical, dental, and vision insurance 401(k) retirement plan with company match Paid time off and 11 Paid Holidays Company-paid life and AD&D insurance Employee Assistance Program Wellness resources and voluntary benefits Training and educational assistance Salary Range: $26 per hour to $37 per hour based on experience.

Assembler III / Certified Welder is responsible for fabricating component parts or assembling the finished product according to the customer's specifications. Secures and maintains correct component parts and supplies required for the operation. Principle Duties and Responsibilities Welder responsibilities Completes work area setup Fits parts together in accordance with the prescribed manner and in accordance with quality standards Operates equipment and tools as required to complete the assembly process Prevents and controls waste of raw material Conduct quality inspections to ensure compliance with standards Ensures work area is safe, clean and organized, and that equipment is safe to operate Completes pre-shift startup equipment inspection checklist and reports any problems or concerns Maintains a clean and orderly work environment Provides basic TPM to equipment and completes TPM paperwork when required Maintains production records as required Performs duties consistent with established safety and quality procedures, rules, and standards Participates in safety, CI, and other programs and meetings Performs other duties as assigned Qualifications High school diploma/GED preferred but not required Minimum 6 months of experience assembling components or specialty products is required 1 year of experience or more is preferred. Working knowledge of basic math May have certification in area of expertise including welding, etc. Must be at least 18 years of age Hourly/Salary Pay Range: $50,000 - $100,000 annually dependent on experience* *pay range may be adjusted depending on cost of living Bonus/Incentive Pay - For hourly positions with incentive pay: Incentive pay may be available for certain job roles and may include piece rate incentives, weekly production bonuses, trip rates, and employee referral bonuses. A discretionary annual bonus based on Company and business unit performance may also be provided. Benefits currently offered to our employees: • Medical insurance • Health savings account with company contribution • Dental insurance • Vision insurance • Basic and voluntary life insurance • Disability insurance • 401(k) plan with company match • Paid vacation and holidays • Stock purchase program with employee discount • Educational reimbursement • Wellness programs and challenges • Other supplemental benefits The Company is an Equal Opportunity Employer.

DC Fabricators Inc. is the leader in the design, technology and manufacturing of steam condensers and heat exchangers that support the US Navy Submarine, Aircraft Carrier and other programs. Our facility specializes in corrosion resistant alloy and dissimilar metal fabrications. DCF has an extensive history of excellent performance in development, design and manufacturing, meeting the critical requirements of the US Navy for the prime contractors and shipyards. We are looking for a Fitter/Fabricator to join our team in Florence, NJ! 2nd shift - 3:30pm-12:00am $30.00-$37.34 max DOE The Fitter/Fabricator is concerned with reading and understanding assembly instructions, steel blueprints and ensuring that the required parts are present and meeting quality control standards. Essential Duties of the Fitter/Fabricator: * Manufacturer an assortment of products using various raw materials, tools, and their own hand tools. * Responsible for reading and understanding assembly instructions; fitting of parts to meet drawing and other specifications to allow the part to be welded properly. * Fitting of parts includes plasma cutting, gas burning, and grinding as required to align and secure parts to meet the drawings and anticipated weld distortion. * Understand the importance of safely handling of assemblies and the proper operation of overhead cranes and other material handling equipment. * Provides guidance and direction to the hourly personnel assigned to the department/shift, including but not limited to providing personnel training. * Adheres to required MIL specifications. * All other duties as assigned. Preferred Qualifications: * GMAW-P - 2209, 625, 316 * GMAW-P - 100S, 70S * GTAW - 2209, 625, 316, 82 * GTAW - 100S, 70S * GMAW-P - CuNi 67 * GTAW - NiCu-7 67 * Small Dia Pipe - 2209, 625, 316 * Socket Weld - Stainless Education/Experience: High School/Trade School diploma. Must have at least three (3) years of relevant Fabrication experience. Basic computer skills required. Must be able to read blueprints. Must be able to use welding, plate cutting, and grinding tools Must be able to work with minimal supervision. Properly trained to operate cranes safely Must have manual dexterity, accuracy, and attention to detail. Must have knowledge of metal properties and other material. Must have mathematical skills and analytical abilities. Job Type: Full-time Pay: $30.00 - $37.34 per hour Benefits: * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Paid time off * Vision insurance Location: * Florence, NJ 08518 (Preferred) Work Location: In person

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal is looking for a Welder to join our team. This role will be on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday. at our Darrah St location. Responsibilities: Perform Welding Operations: Welding thin, light gauge nickel alloy & stainless steel metal (0.020 - .125in). Maintain Welding Equipment: Ensure welding equipment is in good working condition by conducting regular maintenance and repairs. Report any malfunctions or issues to the supervisor. Setting up a GTAW machine, including hookup to their own shielding gas cylinders Quality Control: Inspect welded joints and structures to ensure they meet quality standards and specifications. Ability to perform certain quality inspections on their own work through use of measuring tools, specifically calipers. Follow Safety Procedures: Adhere to safety protocols and guidelines to prevent accidents and injuries. Use personal protective equipment (PPE) and follow proper safety procedures during welding operations. Collaborate with Team: Work closely with engineers, fabricators, and other team members to complete projects efficiently and accurately. Communicate effectively to ensure tasks are completed on time and to specifications. Hands-on work: Roll-forming sheet metal. Comprehension of drawings: Reading, reasoning, and fabricating from blue prints, shop drawings, and standard work procedures. Requirements: Welding Experience: Minimum of 1 year of experience in welding operations, preferably in a manufacturing or industrial setting. Experience with various welding processes with sheet metal or comparable materials. Technical Skills: Proficient in reading and interpreting engineering drawings, blueprints, and welding symbols. Strong understanding of metallurgy and welding principles. Certifications: Possess relevant welding certifications such as AWS (American Welding Society) certification or equivalent. Additional certifications in specific welding techniques or materials may be preferred. Attention to Detail: Ability to work with precision and attention to detail to produce high-quality welds and assemblies. Familiarity with quality control techniques and inspection procedures is essential. Safety Awareness: Knowledge of safety protocols and procedures related to welding operations. Demonstrated commitment to maintaining a safe working environment for oneself and others. Teamwork and Communication: Excellent teamwork and communication skills to collaborate effectively with colleagues and convey information accurately. Physical Stamina: Ability to stand for extended periods, lift heavy materials, and work in various positions and environments. Good physical stamina and dexterity are required for welding tasks. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week (6:00AM-4:30PM M-Th) Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

**We are seeking a dedicated General Production Laborer to join our team. This role involves performing a variety of tasks that are essential to our operations, including cleaning and preparing job sites, loading and delivering materials, and simple assembly tasks.** **Responsibilities** + Clean and prepare job sites efficiently. + Load and deliver materials to designated locations. + Perform simple assembly tasks as required. + Maintain concentration and focus on assigned tasks. + Communicate effectively to understand and relay information. **Essential Skills** + Physical strength and stamina. + Hand-eye coordination. + Ability to concentrate on tasks. + Effective communication skills. **Additional Skills & Qualifications** + No minimum educational requirements. **Why Work Here?** **Join a team-oriented environment where your contributions are valued. We provide opportunities for growth and development, ensuring a positive work-life balance within a supportive company culture.** **Work Environment** **This position is based in a warehouse setting, requiring physical activity and adherence to safety protocols. Dress code is casual and suitable for a warehouse environment.** **Job Type & Location** This is a Contract to Hire position based out of Hillsborough, NJ. **Pay and Benefits** The pay range for this position is $16.00 - $17.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Hillsborough,NJ. **Application Deadline** This position is anticipated to close on Dec 15, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Welder 1st Shift (7:00am-3:00pm) Department: FabricationAccountability: This position reports to the Production Supervisor - Fabrication Responsibilities:•Responsible for welding various metals: stainless steel, aluminum, carbon steel.•Welds and Fabricates custom parts using a variety of machines including but not limited to, Millermatic 250 Mig Welder, Syncrowave 350 LX Tig Welder•As workload requires, this position may involve other fabrication work in area's such but not limited to Fastener Insertion Press, Shear, Spot Weld Machine, Auto-weld machine, Milling machine, Deburring, and Sanding Equipment•Executes to work orders and engineering drawings•Receives verbal orders to fabricate custom designed parts and products•Receives written and verbal instruction on priority of orders•Receives, checks and handles raw material from inventory as needed•Sets up for daily work according to production schedule and/or verbal instructions•Checks parts, products and machinery for defects•Works at different workstations as job requires•Maintains a clean safe work area•Moves finished goods to other inventory or work areas•Assists with special projects as assigned by supervisor Requirements:•High School Diploma or GED•Must supply own basic hand tools•Must be able to safely operate a forklift and other material handling equipment•Able to MIG and TIG weld up to ¼” steel and aluminum.•Ability to Read and Interpret Quality Documents and Drawings•Able to perform basic mathematical computations•Must regularly be able to lift and move from 50 to 100 lbs•Must be able to tolerate long periods of standing Work Environment - Manufacturing:•Chemicals, (See SDS)•Machinery•Dust•Paint•Noise•Protective Clothing and Equipment Required Company Details Havis is at the forefront of revolutionizing industries by unlocking the full potential of technology to drive productivity and enhance safety through innovative mobility solutions. We take pride in being the trusted partner of choice for technology providers, enabling them to move business forward in a wide range of industries, such as Retail & Hospitality, Public Safety, Energy & Utilities, Warehouse & Distribution, Field Operations, Transportation & Logistics, Healthcare, and Military Defense. Havis designs and manufactures market-leading Computing, Mounting, Power, and Transport Solutions. Our engineering and product development centers serve as the backbone of our commitment to excellence. With a team of highly-skilled engineers who have a deep understanding of design, manufacturing processes, and cutting-edge technologies, Havis consistently delivers products that set our market and industry standards and exceed customer expectations. Our state-of-the-art manufacturing facilities complement our engineering capabilities, allowing us to bring our design concepts to life with precision and efficiency. Our focus on quality and rigorous testing protocols ensures that our products are built to withstand the demands of real-world applications. We are a dynamic and customer-focused company that continuously strives to meet and exceed the evolving needs of our valued customers. We firmly believe that collaboration lies at the heart of successful partnerships, and we actively engage with our clients to understand their unique requirements, challenges, and goals. By fostering open lines of communication, we work together to develop innovative solutions that drive safety, productivity, and, ultimately, customer satisfaction. Havis collaborates with partners and customers to provide product information, installation support, updates on industry testing and validation requirements to solve diverse challenges in the field. Havis, Inc. - Website: ************* Headquartered in Warminster, PA ISO 9001 and 14001 Certified - Quality Management System Fast growing company in a niche, growing marketplace Company offers Health, Dental, Vision and 401(k) Plan with employer match 100% employer paid STD, LTD and Life & ADD benefits Generous paid time off (PTO) and holiday benefits Competitive pay commensurate with education, skills, and experience Prepared By: Human ResourcesApproved by: Production Manager

Department RD&S Employment Type Full Time Location Fairless Hills, PA Workplace type Onsite Key Responsibilities Skills, Knowledge and Expertise Benefits About RD&S Refrigeration Design & Service, Inc. (RD&S) is a design/build industrial refrigeration contracting firm based in metropolitan Philadelphia. We provide a full line of services to meet the needs of the industrial refrigeration marketplace. From its beginning as a local company, RD&S has grown to become an international team noted for excellence in meeting our customer's needs. Our unique ability to design, fabricate, and construct site built or skid mounted industrial refrigeration systems sets us apart from other industrial refrigeration design/build firms and ensures on-time delivery of a superior product, designed, engineered and constructed by our in-house team of experts. At RD&S, we have two main goals: First and foremost, we want to be our customers' single source supplier of refrigeration services; Second, we seek to set the industry standard for quality and service.

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 / (251)385-0491 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads' capabilities enable our customers to achieve superior results by deploying our diverse, highly skilled workforce and fabrication capabilities across commercial, government and maritime projects, all backed by state‐of‐the‐art resources and a 100+ year legacy of leadership. As a member of the Rhoads team, you'll join a quickly growing team of energetic, skilled tradespeople and professionals who are committed to delivering exceptional products and services to our customers across every market we serve. We are building on our success across more than a century by continuing to grow an innovative company dedicated to building exciting careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex pipe spools and complex piping systems to work packages, drawings, PI&Ds per ASME B31.1 and MIL TP278, to production schedule under the guidance of the shop superintendent. What You Will Be Doing Perform pipe welding with pipe fitting experience using knowledge of codes and specifications Reads and deciphers work packages, work scope, engineered drawings, and PI&Ds Works with the pipe shop group with a focus on quality, customer compliance, and schedule Assemble piping spools, weld, test, and assure all shop packages are complete, and work is compliant before presenting to QA Assures welding equipment is in good working condition and reports any malfunctions or maintenance needed Have all personal gear to perform pipe welding and fitting including welding gear, measuring devices, levels square, etc. maintained in good condition Additional duties as assigned Your Background High school Graduate, related to Trade school and no less than 5 years' work history/experience in this industry required Have experience in GTAW processes. Must qualify to Pipe in the 6-G position Per ASME Section IX using the GTAW process. Experience in structural welding using GMAW in various positions to AWS D1.1. Proven past welding qualification history is a plus Decipher welding symbols, reads, and follows work packages, drawings, PI&Ds, and blueprints Use various measuring equipment Full range of mechanical knowledge as well as the ability to fabricate and install piping on equipment as specified on drawings and PI&Ds 5+ years of experience Able to work in a team environment and self-motivated. US Citizenship required Able to work overtime when needed Have all the necessary hand tools to perform their discipline and maintain in good working order Supply their own transportation to and from Rhoads Industries, able to work within the Navy Yard and other job sites at times when requested OSHA /10 safety training required provided by Rhoads, having an up-to-date OSHA/10 a plus Experience in MIL work Per TP278 and past qualifications to TP248 is a plus Various shifts may be required, including overtime and weekends The Work Environment at Rhoads The performance of this position involves exposure to construction or industrial areas where the use of personal protective equipment such as safety glasses, hard hats and hearing protection is required. What Rhoads Can Offer You At Rhoads Industries, our team is the foundation of our success. Along with a competitive salary, we offer a variety of additional benefits designed to support your well-being and promote a healthy work-life balance for you and your family. Benefits include: Competitive health insurance packages 401k matching PTO Our Location We are based out of The Navy Yard in Philadelphia, a reimagined industrial locale with more than 150 companies, 15,000+ people, 20 acres of parks, dining options, public art, and events throughout the year. Recognized as a leading model for repurposing military and industrial assets for a diversified modern economy, The Navy Yard has been dubbed “the coolest shipyard in America.” For more information about Rhoads Industries and our opportunities please visit RhoadsInc.com and follow us on LinkedIn. Rhoads Industries, Inc. is an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, and disability.

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. * Ensure that all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met * Knowledge and proficiency of heavy shipyard construction welding in all positions using approved WPS (Welding Procedure Specification) determined by Hanwha Philly Shipyard and classification society * Welding process includes: * FCAW - Flux Core Arc Welding * SMAC - Shielded Metal Arc Welding * SAW - Submerged Arc Welding * EGW - Electro Gas Welding * Automated Welding Processes * Stainless Steel Fillet Welding * Padding and preparing weld joints per WPS * Carbon Arc Gouging * Note: Not inclusive, shall be determined by vessel specification and classification rules * Knowledge, understanding and demonstration of interpreting approved WPS set forth at Hanwha Philly Shipyard * Knowledge and ability on how to use all tools related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation * Welder must proficiently demonstrate welding ability through performance, and testing as determined by vessel project and classification * Welder must be able to work in a team environment * Welder shall perform internal quality checks of own work performance to assure quality standards are achieved daily * Welder shall maintain their individual NDT rejection set forth by Hanwha Philly Shipyard and classification society * Perform other related duties as required and assigned COMPETENCIES * Work Independently according to valid instructions and Hanwha Philly Shipyard rules and standards * Flexible cooperation with team members * Must be able to work in different environments and areas (e.g. indoors, outdoors, in confined spaces, on scissor lifts and aerial lifts, and in inclement weather) * Ability to orient, train and instruct lesser skilled welders SUPERVISOR RESPONSIBILTY This position has no supervisory responsibilities. WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. * Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE * High School Diploma or GED * 3+ years' work experience welding, (flux core and ceramic preferred) * Welding robotics and programming a plus OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Responsibilities/Knowledge include but are not limited to: Prepares component or area for welding. includes cleaning, layout, and setup. Welds using SMAW, GMAW, and GTAW. Welds can be inspected per VT and PT. Operates arc welding equipment, oxyfuel cutting torch or other cutting methods to ensure alignment or fit. Understand safety precautions associated with welding. Reads and interprets welding symbols from blueprints, specifications, and sketches. Sets up machines and equipment. Application Question(s): Are you a US Citizen? Are you able to obtain a Secret Security Clearance? Do you have experience with GMAW-P and GTAW welding processes with experience on materials such as Carbon steel, Stainless steel, Nickel-Copper, and Aluminum? How did you find this job posting? Example (BuildSubmarines.com, Indeed, NFPC Employee etc.) Experience: Welding: 3 years (Required)

We are seeking a skilled and reliable Welder to join our team. In this role, you will be responsible for performing welding repairs and maintenance on heavy equipment, trucks, and related machinery for a site work company. You will handle on-site and in-shop welding tasks, ensuring the safety, efficiency, and operability of our equipment. Benefits: Medical Insurance paid by Esposito Construction for single rate. 401(k) eligibility with company contribution. Dental insurance eligibility. Vision insurance eligibility. Paid time off. Pay: Flexible, experience based Key Responsibilities: Perform welding repairs and fabrication on heavy equipment (excavators, loaders, dozers) and trucks, addressing structural damages, cracks, and wear. Travel to job sites to provide on-site repairs and troubleshooting for equipment breakdowns. Collaborate with mechanics and operators to assess and identify welding needs. Utilize various welding techniques (MIG, TIG, stick welding, etc.) to repair or fabricate parts and components. Operate tools such as torches, grinders, and plasma cutters to cut and prepare metal. Inspect welds to ensure they meet safety and quality standards. Maintain welding equipment and ensure compliance with safety protocols. Read and interpret blueprints, schematics, and technical drawings to perform repairs. Assist in preventive maintenance tasks to minimize equipment downtime. Qualifications: High school diploma or GED required; technical certification in welding preferred. Proven experience as a welder, preferably working with heavy equipment and trucks. Proficiency in MIG, TIG, and stick welding, with knowledge of various metals (steel, aluminum, etc.). Ability to read and interpret technical drawings and schematics. Strong problem-solving skills and attention to detail. Willingness to travel to job sites and work in varying weather conditions. Valid driver's license required; CDL preferred but not required. Ability to lift heavy materials and work in physically demanding environments. Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job Description Join Our Team: Shop Welder & Fabricator At Precision Hydraulics, we pride ourselves on being at the forefront of the waste equipment industry, offering top-notch retail and industrial equipment repair and maintenance services. We are currently looking for Welders and Fabricators to join our team to repair balers, compactors, and other industrial equipment at our Norristown, PA based shop. This role involves working on hydraulics, basic electrical operations, and welding fabrication to ensure safe and efficient site operations. **Minimum Requirements: ** 1. High School Diploma or G.E.D. 2. 1-2 years of experience in compaction maintenance and repair 3. Proficiency with basic and advanced hand tools 4. Ability to lift up to 50 pounds, climb ladders, and possess a mechanical background 5. Valid Fit-Test certification 6. Reliable transportation is required. **Essential Functions: ** -Conduct inspections, diagnostic tests, preventative maintenance, and repairs on various types of compactors and stationary equipment - Read electrical schematics and diagnose/repair electrical issues using single and three-phase AC voltage, including high-voltage electricity - Read hydraulic schematics and diagnose/repair hydraulic issues - Maintain knowledge of proper installation procedures for compactors and other stationary equipment - Perform or assist with installations, ensuring deadlines are met - Execute welding and fabrication tasks as needed - Accurately complete paperwork and enter data related to equipment repairs in a timely manner - Adhere to all safety policies and procedures - Perform other job-related duties as assigned **Company Culture: ** Our culture is described as customer service oriented, competitive, and growth oriented. Benefits include: Retirement Plan with Company matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Vision insurance Safety Incentive Program **Work Details: ** - Type of work: Other - Work Location: Fabrication Shop - Open to applicants without a college diploma - Remote work: No - Job Type: Full-time - Pay: $22.00 - $28.00 per hour

Job DescriptionJob Summary: Welder:Play a vital role in our metal fabrication process. Your primary responsibility will be to perform MIG welding on various metal components. Your work will contribute directly to the production of high-quality products that meet our clients' expectations. Attention to detail, precision, and adherence to safety protocols are crucial in maintaining the exceptional standards set by the company. Responsibilities: Welder: Perform MIG welding on carbon steel, stainless steel, and aluminum components, adhering to blueprints, engineering specifications, and verbal instructions. Set up and operate welding equipment accurately, ensuring precision and efficiency in all welding tasks. Inspect welds for quality, making necessary adjustments to meet Company's high standards. Work collaboratively with team members to meet production deadlines and maintain workflow. Adhere strictly to safety protocols to ensure a safe working environment. Maintain and perform regular cleaning and upkeep of welding equipment to ensure optimal performance. Requirements: Welder: Preferred minimum of 3 years of experience in Welding within a manufacturing or metal fabrication environment. Proficiency in working with carbon steel, stainless steel, and aluminum. Strong understanding of MIG welding techniques and the ability to operate and troubleshoot welding equipment. Ability to read and interpret blueprints, specifications, and verbal instructions for precise welding operations. High attention to detail and ability to produce consistent, high-quality welds. Positive attitude, strong work ethic, and flexibility to adapt to changing needs in a dynamic environment. Ability to work both independently and as part of a team to achieve production goals. Welding certifications (e.g., AWS) are preferred but not required. Robotic Welding experience is an ADDED advantage! Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

STRONGARM Designs provides the ideal HMI solution to the healthcare, bio-pharmaceutical, food, and other industries. We are diligently seeking to hire a candidate for TIG Welder Entry Level, Level 1 or Level 2, responsible for TIG/GTAW welding formed sheet metal and cast metal components. This position provides welded metal components which are used to support and fabricate our entire line of products including CleanMount, Vertica, Mobile Stations, and Suite-Stations. Join a team and company with endless innovative visions in a rapidly growing, leading industry! JOB DESCRIPTION: Operate a TIG welding machine to join metal together based on provided engineering print. Fit, tack, and weld metal which include various sizes and shapes from either the press brake, laser cutter, or cast parts. Welding includes components with both square and curved surfaces. Maintain and ensure quality and aesthetic standards for custom, made to order HMI systems. REQUIREMENTS: Prior experience TIG welding thin gauge stainless steel, mild steel, and aluminum a must (typically 14-gauge 304 stainless steel and 14-guage CRS). Experience reading engineering prints and welding symbols a must. Able to use and read various measuring devices such as calipers and protractors. Knowledge of the different types of metal used at STRONGARM (stainless steel, CRS, and aluminum) Knowledge of sheet metal gauges. Prior knowledge and ability to weld all typical types of joints (including butt joints, lap joints, corner joints, tree joints, and edge joints) Able to stand, bend, lift, and/or walk for 2+ hours at a time. RESPONSIBILITIES: Join metal together using a TIG welding machine including both square and curved surfaces. Perform measurements/inspection to ensure conformance to work orders and engineering print specifications such as flatness, parallelism, and dimensional tolerances. Fill non-conforming materials reports for incoming materials that are out of spec or defective. Ensure quality and aesthetic standards are maintained. Clock in and out of work order travelers using the VISUAL bar code system. Follow the daily production schedule. Perform within the parameters of STRONGARM's policies and procedures. BENEFITS CRAFTED FOR YOU: Competitive compensation based on experience and certification PTO (including sick and personal days) 401K, Health insurance, vision, dental STRONGARM swag Biyearly bonuses & yearly raises based on performance reviews STRONGARM Designs is looking for high-energy, mechanically inclined individuals with a positive attitude and willingness to learn. We at STRONGARM are committed to continuous improvement and seek driven candidates who wish to grow and develop professionally.

MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients. Job Description Position summary: use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Qualifications · Demonstrated experience as a professional welder. · Ability to strictly adhere to all safety standards. · Demonstrated ability to accept and follow instructions from others. · Willingness and ability to work cooperatively with others. · Strong knowledge of welding equipment, materials, etc.. · Must successfully complete pre-access drug and alcohol testing. · Must have a valid driver's license. Additional Information · Weld components in flat, vertical, or overhead positions. · Operate safety equipment and use safe work habits. · Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. · Measure dimensions of completed products or workpieces to verify conformance to specifications . · Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. · Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys . · Select production equipment according to product specifications. · Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. · Monitor equipment operation to ensure that products are not flawed. · Review blueprints or other instructions to determine operational methods or sequences. · Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. · Clean workpieces or finished products. · Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. · May perform other related duties as assigned. Must have, or be able to obtain, OSHA 10 certification.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR sCkIDpzNuh

Job DescriptionDescription Reporting to the Director of Construction and field supervisor as applicable, this role will install industrial refrigeration systems at various locations around the country. Key Responsibilities Maintain a positive and professional appearance Serve the customer's needs through prompt, thorough and professional service Understand all weld procedures used by RD&S and perform visual quality checks throughout the installation of the system Complete daily/weekly work logs Travel as required and stay out of town on a job up to 10 days, occasionally longer. Weld Carbon Steel and Stainless-Steel refrigeration pipe per RD&S WPS B31.5 standards and Structural D1.1. Cost for WTTI to issue weld certification will be paid for by RD&S. Time to complete certifications will be on employee. This must be completed prior to or within 90 days of employment. Read and understand drawings associated with the installation of an industrial refrigeration system and efficiently install sections of system as directed. Attend all company sponsored events. Attend all required company meetings, construction meetings, and monthly safety meetings. Supply personal hand tools and welding shield as required for this position. Complete the OSHA 10 online course prior to start date. This online training course will be paid for by RD&S. Skills Knowledge and ExpertiseRequired Skills/Abilities: Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models, and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Ability to get a TWIC card to work at facilities operated under Dept of Homeland Security Must be able to get a clean DOT physical. Welding trucks fall under DOT regulations Education, Certifications, and Experience: OSHA-10 required. Completion of a formal apprenticeship OR successful completion of an in-company, training program preferred. Physical Requirements: Must be able to weld components that are vertical, flat, or overhead. Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range. Must be able to lift up to 15 pounds at a time. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials.