Welder - Level A (PSNC ICW Union)
Welder fitter job in Durham, NC
Employee Type:
Regular-Full time
Union/Non:
The Construction & Maintenance Department is responsible for the construction, maintenance, and operation of the Company's natural gas distribution system.
The successful candidate must fully demonstrate specified welding competencies within twelve (12) months of acceptance of the position and is subject to periodic competency testing.
What you will do:
Performs stick welding on steel natural gas lines, including downhill welds using 6010 and 7010 welding rods and uphill welds using 7018 hot rods.
Performs various construction and maintenance activities the majority of the time.
Installs pressure control fittings.
Completes steel main tie-ins, installing steel services and repair fittings.
Installs stations, farm taps and meter sets.
Performs natural gas leak investigation and detection and all installation and repair procedures of damaged service lines and plastic mains.
Sets up common Department of Transportation approved worksites.
Pinpoints and grade leaks on the natural gas distribution system.
Calibrates instruments.
Uses self-contained breathing apparatus equipment (when needed).
Completes a variety of paperwork in writing and electronic work queues.
Safely drives a company vehicle.
Operator Qualifications involve written guidelines and requirements natural gas employees must follow to ensure the safe and responsible operation of natural gas pipelines. Required, annual Operator Qualification testing involves both written and hands-on components to ensure those who perform covered, safety-sensitive tasks on the natural gas system are trained, knowledgeable, and qualified.
This position reports to our North Durham Operations Center located in Durham, North Carolina.
This position has two levels (Welder-Trainee and Welder A) which allows for progression over time.
Who You Are:
0 - 12 months construction/utility experience.
Experience with common hand and power tools.
Ability to calibrate instruments and use self-contained breathing apparatus and pipe squeeze-off equipment.
Effective communication and interpersonal skills for positive customer and contractor interactions is critical.
Basic computer and internet navigation skills are key.
Ability to adhere to safe working and defensive driving procedures.
Ability to work independently and as a team member within a diverse team.
Availability for overtime, as needed.
Availability for natural gas emergency response during the workday, as well as in the evenings and some weekends, when on-call.
Must be willing and able to meet a 45-minute emergency response time from the geographical center of the Durham area. Emergency response time is a critical measure for the Company and candidates are required to consistently meet this requirement, including when on-call.
Occasional heavy lifting up to 80 lbs. independently.
Preferred:
6 - 12 months of construction/utility experience.
Welding certificate.
Experience welding in the Company's fabrication shop, under direct supervision.
6 months welding experience.
Related welding experience and knowledge highly preferred.
Good mechanical aptitude.
General knowledge of pressure control and tapping/stopping procedures.
Bilingual (Spanish) candidates.
Education Requirements:
Required High School or equivalent (i.e., GED)
Licenses:
Must have a valid driver's license with a safe driving history.
A valid Commercial Driver's License (CDL) is strongly preferred OR the ability to obtain a Commercial Driver's License within 6 months of employment is preferred.
Other Working Conditions:
Position works within a crew structure and/or as a floating welder.
Welding duties are performed while utilizing the appropriate personal protective equipment.
Work is performed primarily outside in varying weather conditions (i.e. cold, heat, rain, etc.)
Position requires continuous travel throughout the service territory with frequent stops, entering/exiting the company vehicle, safely parking in a wide variety of situations, and driving in construction zones.
Position may encounter agitated/irate customers.
Physical Requirements include but are not limited to:
Balancing, bending and stooping, climbing, crawling, carrying (up to 80 pounds), grasping, kneeling, lifting (up to 80 pounds), pulling hand over hand, pushing, reaching above shoulder, repetitive motion, sitting, standing, walking, visual requirement (able to see screens, detect color coding, read fine print), hearing requirement.
Mental Requirements (Both field & office) include but are not limited to:
Ability to: understand, remember and apply oral and/or written instructions or other information, understand complex problems and collaborate/explore alternative solutions, organize thoughts and ideas into understandable terminology, organize and prioritize work schedule on a short-term basis, make decisions which have moderate impact on the immediate work unit and monitor impact outside this area, understand and follow basic instructions and guidelines, complete routine forms, compose letters, outlines, memoranda and basic reports and communicate with individuals via telephone.
Closing Statements:
Military service members and veterans with ranks from E3-E5, W1-W2, or O1-O3, plus appropriate equivalent combination of education and years of experience as outlined below will be considered for this opportunity.
At this time, Enbridge cannot transfer or sponsor a work visa or employment authorization for this position.
This position does not offer relocation assistance.
#joinourteam
At Enbridge, we are dedicated to our core value of Inclusion. We are proud to be an Equal Opportunity Employer. We are committed to providing employment opportunities to all qualified individuals, without regard to age, race, color, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, marital status, family status, veteran status, Indigenous status, disability, or any other reason protected by federal, state, or local law. Applicants with disabilities can request accessible formats, communication supports, or other accessibility assistance by contacting ********************.
Information For Applicants:
Applications can be submitted via our online recruiting system only.
We appreciate your interest in working with us; however, only those applicants selected for interviews will be contacted.
Final candidates for this position may be required to undergo a security screening, including a criminal records check.
To learn more about us, visit ****************
Auto-ApplyWelder
Welder fitter job in Graham, NC
Watch this video to learn more about Pureflow! NC WELDER About Our Organization: With over 38 years of experience providing high purity water solutions, Pureflow is committed to serving clients by designing, building, installing and maintaining water purification systems in a broad range of commercial and industrial markets. We understand that a successful business needs quality employees. We are seeking highly talented and motivated candidates to join our company where people, integrity, and excellence are essential to our culture.
About the Position:
We are seeking a Welder whose job responsibilities include, but are not limited to, the following for water purification and treatment systems and equipment:
Job Responsibilities:
* Join, fabricate, and repair metal and other weldable material by applying appropriate welding techniques
* Interpret blueprints, specifications, diagrams, or schematics to determine appropriate welding process
* May position pieces to be welded into jigs, holding fixtures, or guides using measuring instruments and hand tools
* Operate welding equipment, regulates current and voltage or gas and wire flow rates for proper penetration and fusion of materials
* Obtain maximum weld strength, avoiding distortion and excessive weld at joints
* Inspect completed welds to determine structural soundness
* May assist Installation Department staff in installing new, central water systems at customer sites
* Maintain extraordinarily neat work areas, including shop, work sites, and vehicles, as applicable
Qualifications:
* 2 or more years welding experience (steel fabrication & pipe welding)
* Familiar with commonly-used welding concepts, practices, and procedures
* High school diploma or GED
* Welding Certification preferred
* Strong mechanical aptitude
* Self-motivated, results-oriented, organized, energetic, and capable of staying cool under pressure from multiple ongoing projects
Working Conditions:
* Majority of work performed in industrial shop setting
* Occasional work performed in industrial customer facilities
* Travel possible, with 3 overnight stays per month on average
* Ability to lift up to 100 lbs.
Disclaimer:
May perform other duties, as assigned
Reports to:
Installation/Fabrication Manager
Benefits:
* Competitive base salary
* Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, Health Savings Account (with company contributions), and more
* $1 for $1 401k match up to 4%
* 9 Company-paid holidays
* Generous personal time off that increases with tenure
* Education assistance
* Employee referral bonus program
* Ongoing training and development by internal and external industry experts
Pureflow is an equal-opportunity employer and requires post-offer, pre-employment drug tests and background checks on all positions.
Fitter
Welder fitter job in Winston-Salem, NC
🔥 Join the Superhero Team! - Sprinkler Helper Wanted 🔥 Company:
Superhero Fire Protection
Sprinkler Helper (Entry-Level or Experienced)
About Us: At Superhero Fire Protection, we don't just install fire sprinkler systems-we protect lives and livelihoods. As
the greatest fire protection company
in the industry, we lead with passion, integrity, and unmatched expertise. We offer top industry pay, ongoing certifications, and career planning that actually means something. But most importantly, we're a team that truly cares-about our people, our profession, and the communities we serve.
What You'll Do:
As a Sprinkler Helper, you'll assist experienced sprinkler fitters in the installation, maintenance, and repair of fire sprinkler systems. You'll work on real job sites, learn the trade from the best, and take your first steps toward a rewarding, long-term career in fire protection.
Responsibilities:
Support the installation of fire sprinkler systems
Handle tools, materials, and job site clean-up
Measure, cut, and thread pipe under supervision
Load and unload materials and equipment
Follow safety procedures and company standards at all times
Be on time, work hard, and bring a positive attitude every day
What We're Looking For:
Willingness to learn and grow within the trade
Mechanical aptitude and attention to detail
Ability to work in various physical environments
Valid driver's license and reliable transportation
Strong work ethic and team-player mindset
Bonus Points If You Have:
Previous construction or trade experience
OSHA certification or other relevant credentials
What We Offer:
Top industry pay
Annual Career Planning to help you grow with us
Paid on-the-job training and certifications
Clear pathway to becoming a Journeyman
Supportive, family-like culture that values your future
Opportunities to work on meaningful, life-saving projects
Ready to Rise with the Best?
Whether you're just starting out or ready to take your trade career to the next level,
Superhero Fire Protection
is where you belong.
Apply today and let's protect the world-together.
📩 To Apply: Send your resume or brief introduction to ***************************
🌐 Learn more about us: *********************
Auto-ApplyWelder or Fitter - 2nd shift
Welder fitter job in Winston-Salem, NC
Lyndon Steel Company, a leading structural steel fabricator, has been meeting the needs of the industry since 1977. We provide high quality steel at a competitive price and on-time delivery. With over 250,000 square feet of fabrication facilities, Lyndon is capable of producing over 50,000 tons of fabricated steel per year. With CNC automated machinery, we can support fast-track construction and deliver to customers across many industries.
Lyndon offer competitive wages and benefits, including medical, dental, vision, flexible spending account, 401(k) plus match, company paid life insurance, vacation, and eight paid holidays. We offer a sign-on bonus, paid in two installments after 90 days of employment and at the 6-months mark. In addition, we foster a work environment of respect, trust, equality, teamwork, innovation, and growth.
Job Description
We are seeking full-time Structural Steel Welders and Fitters to join our 2nd Shift. Responsibilities include:
Perform welding operations using MIG welding processes
Read and interpret blueprints, drawings, and specifications accurately
Set up welding equipment and maintain proper safety protocols
Inspect materials, structures, and products to ensure quality standards are met
Measure and cut materials according to specifications
Maintain welding equipment and work area
Follow all safety procedures and wear appropriate protective equipment
These positions do include overtime; our second shift schedule is Monday through Friday 5pm to 5am, and Saturday 5pm to 10pm.
We do offer a $2 per hour shift differntial.
Qualifications
We would like to hear from you if you have the following:
Able to lift up to 50 pounds
Safety conscious
Have good attendance
Able to work overtime
Have knowledge of drawing language and symbols (for Fitter position)
Are able to use steel hand working tools
Previous welding experience preferred
Pass a welders certification test
Have the ability to safely operate overhead cranes
Knowledge of minor welding machine maintenance is helpful
Knowledge of oxy/acetylene torches and measuring devices, i.e. tapes, squares and levels
Additional Information
All your information will be kept confidential according to EEO guidelines.
TIG Welder
Welder fitter job in Greensboro, NC
Experienced TIG/MIG Welder - Stainless Steel Fabrication Industry: Industrial Equipment Manufacturing Experience Required: Minimum 2 Years Our Client A leading manufacturer of large, industrial ovens used across various sectors. Our team specializes in precision fabrication and assembly, with a strong focus on quality and innovation.
Position Overview
We are seeking a skilled TIG/MIG Welder with hands-on experience in stainless steel welding. This role is not entry-level-we're looking for professionals who understand the nuances of thin-gauge metalwork and can deliver high-quality vertical welds with precision.
Key Responsibilities
Perform 85% TIG welding and 15% MIG welding on stainless steel components.
Execute vertical welds with accuracy and consistency.
Work with thin-gauge stainless steel, requiring low heat and high precision.
Collaborate with the fabrication team to assemble large industrial ovens.
Maintain safety and quality standards throughout the welding process.
Qualifications
Minimum 2 years of real-world welding experience (not school-based).
Proven expertise in TIG welding, especially on stainless steel.
Comfortable with vertical welds and precision techniques.
Experience with thin materials-pipe welders used to high heat and thick metals may not be a good fit.
Strong attention to detail and commitment to quality.
Pay based on experience.
Why Join Us
Work on innovative industrial products.
Be part of a skilled and experienced team.
Competitive pay and benefits.
Opportunities for growth and advancement.
How to Apply
Submit your resume and a brief summary of your welding experience, including types of materials and welding positions you've worked with or click apply online.
Resume can be sent to Alonzo at ****************************.
Easy ApplyWelder/Finisher
Welder fitter job in Greensboro, NC
Perform welding activities or a combination of welding and finishing activities to complete final fabrication and assembly of hollow metal frames and wood doors. Use hand-welding equipment to weld or join metal components and grinding equipment to finish. Perform other general shop tasks.
Lay out, position, align, and secure parts and assemblies prior to assembly to obtain required configurations or positions for welding, using straightedges, combination squares, calipers, clamps, tape measures and rulers. Cut/alter material components as needed.
Prepare, set up, and operate necessary tools and equipment's for welding job such as shielded metal arc, gas metal arc or other welding equipment's common to the trade.
Perform finishing tasks such as grinding, painting, etc.
Examine finished product and compare to order specifications.
Organize and put away incoming product/materials
Stage outgoing product for pick-up or delivery
Assist loading/unloading trucks and moving of material/product, may require use of forklift
Maintain cleanliness of workspace and assist with general shop maintenance
Alter hollow metal doors/wood doors as required, install lite kits
Make local deliveries (if necessary)
Perform on-site labor/service
Qualifications
Previous welding experience preferred
Knowledge of welding machines and tools, including their uses, repair, and maintenance
Application of basic math and geometry
Ability to follow written, visual (drawings or images), and verbal instructions and work independently
Position may require a valid driver's license and be insurable to drive
Must be able to successfully pass a pre-employment background check and drug screen.
Willingness and able to work overtime as needed
Utilize technology for tracking hours and job progress (computers, iPad, etc.)
Additional Information
Benefits: Medical and Dental Insurance, Vision, Life, and Disability Insurance, as well as Voluntary Benefits, HSA & FSA, and Employee contribution to 401k.
*Employer match, up to 4%.
PTO and paid Holidays..
Hourly: $20-$25 DOE
Hours: M-Th 7am-5pm and Fri 7 am-11 am
Employment for this position is contingent upon the successful completion of a background check and drug screening. This role is classified as safety-sensitive, and as such, is subject to a zero-tolerance drug and alcohol policy. Drug screening will be conducted in accordance with federal regulations, including but not limited to the U.S. Department of Transportation (DOT) and applicable state and local laws. A positive drug test or failure to comply with the screening process will result in disqualification from employment.
This job description describes the general nature and level of work performed by employees assigned to this position and may be modified based on position location and facility need. It does not state or imply that these are the only duties and responsibilities assigned to the job. Employees may be required to perform other job-related duties as directed by management. All job requirements are subject to change over time, at the discretion of management, and to possible modification to reasonably accommodate individuals with a disability. If offered as a part-time position, wages will be non-exempt, paid at an hourly rate.
All your information will be kept confidential according to EEO guidelines.
Industrial Pipe Welder
Welder fitter job in Winston-Salem, NC
SUMMARY Stick Pipe - Capable of certifying on single process pipe being proficient in SMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy.
RESPONSIBILITIES
* Selects type and size of pipe or other related materials and equipment according to specifications.
* Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques.
* May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes.
* Lays out, positions, aligns and fits components together in various body positions.
* Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together.
* Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor.
* Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun.
* Starts power supply to produce electric current.
* Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece.
* Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
* May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes.
* Examines weld for bead size and other specifications.
* Loads, transports and unloads material, tools, equipment and supplies.
* May assist in lifting, positioning and securing of materials and work pieces during installation.
* Performs minor maintenance or cleaning activities of tools and equipment.
* Assists other mechanics as needed.
* Respiratory protection is common and may be required.
* Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in.
* Responsible for observing and complying with all safety and project rules. Performs other duties as required.
JOB REQUIREMENTS
* Work within precise limits or standards of accuracy.
* Make decisions based on measurable criteria.
* Apply basic mathematics to solve problems.
* Plan work and select proper tools.
* Visualize objects in three dimensions from plans and drawings.
* Compare and see differences in the size, shape and form of lines, figures and objects.
QUALIFICATIONS
May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager.
PHYSICAL REQUIREMENTS
1. Strength:
a. Standing 50% Walking 20% Sitting 30%
b. Lifting 35 lb.
Carrying 35 lb.
Pushing 0 ft-lb.
Pulling 0 ft-lb.
2. Climbing O
Balancing O
3. Stooping O
Kneeling O
Crouching O
Crawling O
Reaching C
Handling C
EXPLANATION OF SYMBOLS
NP Not Present
0 Occasionally (0-33%)
F Frequently (34- 66%)
C Constantly (67- 100%)
Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.
Welder B - Greensboro NC
Welder fitter job in Greensboro, NC
ATTENTION MILITARY AFFILIATED JOB SEEKERS
- Our organization works with partner companies to source qualified talent for their open roles. The following position is available to
Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers
. If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps.
The Industrial Process Filtration Division brings together over one hundred years of expertise in filtration and separation products. With safety and innovative solutions at the forefront of our designs, we provide a complete breadth of code stamped filter vessels and filter cartridges under the PECO product line servicing the upstream, midstream and downstream markets. From chemicals, water, inks, paints, and coatings and any general fluid application in between, we provide a variety of Parker pleated and depth filters to fit industrial application needs.
Position Summary
Independently perform simple to moderately difficult GTAW welds on standard high alloys (300 series stainless steels) and certain high-performance alloys.
Responsibilities
Including but not limited to:
Performing the following machine welds on 300 series stainless steels and certain high-performance alloys (Alloy 20, etc.):
Solid sheet to solid sheet (with or without perforations). Examples: wrapper seam, end ring seam
Solid sheet to sintered laminate. Example: safe edge
Sintered laminate to sintered laminate. Examples: Poroplate tube seam, Poroplate welded panel
Performing the following hand welds on 300 series stainless steels and certain high-performance alloys:
Tack welds
Weld repairs (HAZ and media repairs)
Circumferential assembly welds. Examples: Poroplate tube assembly joints, fusion welded end treatments
Backwashes
Performing shearing and forming processes associated with the preparation of materials for welding. Performing post-welding activities such as forming, swaging, grinding, drifting and inspection.
Ensure the following:
Inform supervisor or group leader of any problems with manufacturing instructions, drawings, processes or product.
Work environment is safe, cleaned daily and organized.
Adhere to all safety and attendance policies, procedures and work rules.
Clock properly and on the applicable job/operation per procedure.
Able to read applicable design drawings and follow manufacturing instructions.
Complete the Inspection Instruction/Record and properly tag material with an In-Process tag per FPS-QI-00005.
Able to utilize measurement instruments (tape measure, dial caliper, pin mic, go-nogo gage, pi tape, etc.) as required.
Trained and certified in the applicable paragraphs of FPS-QC-00060 & FPS-QC-00060-06
Certified to perform specified welding tasks as applicable. Recertification required on an annual basis.
Adhere to manufacturing orders per FPS-PC-00007 paragraph 9.4.
Additional Qualifications/Responsibilities
High School Diploma or Equivalent.
2 or more years of general gas tungsten arc welding (GTAW) experience. Some welding-related technical school training desired, certificate or diploma in welding technology preferred.
Pipe Welder -Shop Role
Welder fitter job in Sanford, NC
Job Description
Pipe Welder - Pre-Fab Shop
Location: North Carolina | Pay: $32-$34/hr | Full-Time
Join InServ, a leading industrial contractor serving life sciences, advanced manufacturing, and food & beverage sectors. We're hiring experienced Pipe Welders to join our pre-fabrication shop team.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Lay out, fit and weld fabricated, cast and forged pipe components to assemble structural forms (machinery frames, tanks, pressure vessels, piping headers, furnace shells, building and bridge parts according to blueprints and welding/metallurgy knowledge.
Select equipment and plan layout, assembly, and welding, using knowledge of geometry, metal properties, weld shrinkage and welding techniques
Position, align and fit components together; secure parts with bolts, clamps and tack welds.
Thread pipe of all sizes
Set up equipment and weld parts using SMAW, GMAW, and TIG welding processes
Assemble parts by bolting and riveting as needed
Repair products by dismantling, straightening, reshaping, and reassembling parts using cutting torch, straightening press, and hand tools
Maintain certification in in SMAW, GMAW, and TIG welding processes
Tool and Equipment:
Must possess the minimum tools required for Welders under InServ Policy
Proficient in using:
Power drills, grinders, and saws
Pipe threading equipment of all types and sizes
Electric, propane, and diesel-powered welding machines
Plasma cutting machines
Hand tools for lifting, positioning, and aligning (dollies, skates, chain falls, come-alongs, etc.)
Qualifications:
Minimum of 2 years of field experience working as a pipe welder on commercial/industrial projects.
Ability to work independently and maintain schedule after receiving direction
Strong problem-solving and logical reasoning skills
Ability to:
Perform work within established InServ quality and time standards
Adapt to changing duties
Perform accurate arithmetic operations quicly
Interpret blueprints and visualize 3D objects from flat drawings
PHYSICAL DEMANDS:
Work skillfully with hands
Climb and maintain balance on ladders and scaffolds
See well (naturally or with correction) and distinguish colors
Reach for, handle, and grasp pipe, tubing, and hand tools
Bend, crouch, and work in small places
Lift and carry objects weighing up to 50 pounds
WORKING ENVIRONMENT:
Exposure to varying weather conditions (cold, rain, heat)
High noise levels
Occasional high-stress situations
BENEFITS:
Paid time off
401(k)
Health, Dental and Vision insurance
Health Savings account and Flexible spending account
Referral program
Apply today! People with a criminal record are encouraged to apply
Company Overview:
Founded in 1992, InServ is a full-service industrial contractor serving the life sciences, advanced manufacturing, and food and beverage sectors. We specialize in mechanical, electrical and instrumentation, hygienic piping and HVAC trades. Operating from multiple locations across North Carolina, we serve clients throughout the Southeast. Our success is built on an unwavering commitment to safety, quality, and schedule adherence.
Pipewelder - Construction
Welder fitter job in High Point, NC
Responsibilities:
Weld in various positions according to safety-oriented procedures
Perform 100% weld quality in all positions
Manufacture and fabricate finished metal products
Install and repair various equipment and components
Follow blueprints to meet product specifications
Calculate material measurements to verify specifications
Conduct tests to evaluate weld quality and tolerance
Qualifications:
Previous experience in welding, manufacturing, or other related fields
Proficiency in Shielded Metal Arc Welding (SMAW)
Must possess welding attire
Familiarity with welding tools, equipment, and procedures
Familiarity with engineering blueprints and schematics
Ability to pass certifications tests on: Carbon Steel Schedule 40 Pipe, open root joint, and in the 6G fixed position; welds performed must meet ASME Sec IX Boiler and Pressure Vessel Code requirements
Education Requirements:
Minimum of a high school education or equivalent
Minimum of five (5) years of Pipe Welding experience
Job Requirements/Special Skills:
Ability to lift and carry up to 50 lbs
Ability to step over and work on top of fixtures that are 28 inches off the floor when necessary
Ability to work in conditions of varying heat and cold and where noise levels are at or above 90 decibels
Auto-ApplyMIG Welder I - Night Shift - O'Neal Manufacturing Services
Welder fitter job in Greensboro, NC
Duties and Responsibilities * Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques. * Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process. * Inspects completed welds to determine structural soundness.
* Familiar with and complies with all safety requirements and protocols.
* May prepare the materials and set up for a welding device or robot.
* May be required to complete an apprenticeship and/or formal training in area of specialty.
* Support the safety and quality programs by following all accompanying rules and established processes.
* Other duties as assigned.
Shift
* B Crew/Shift: 5:30 PM- 6:00 AM, Overtime as needed.
* Schedule: Rotating/4 days on; 4 days off
* Shift Premium: $3.00 per hour
Skills and Qualifications
* Ability to operate forklift and cranes.
* Ability to read and interpret simple blueprints.
* Ability to use a variety of hand tools such as hammer, pliers, screwdriver, wrench, drill, grinder and bander.
* Ability to use measuring tools such as tape measure, box caliper, slide dial caliper and micrometer.
* Ability to convert fractions to decimals and vice versa.
* Ability to convert metric to English.
* Provide high quality work to all internal and external customers as related to the output of their position.
* Capable of setting up and operating one or more processing machines.
* Speak, write and comprehend conversational English.
* Strong attention to detail.
* High School Diploma or equivalent (preferred).
* Must pass a MIG welder certification.
* Relevant apprenticeship, experience, or vocational training, preferred.
Physical Requirements
* Ability to lift 20-50 lbs. repetitively throughout the course of a shift.
* Ability to bend, sit, stand, twist and stoop for long periods of time.
* Ability to walk 2-5 miles throughout the course of a shift.
* Have good vision of 20/30 with corrective lenses.
* Ability to maintain coordination of hand and finger movements to grasp and manipulate objects with precision.
Subject to environmental conditions that occur indoors and outdoors which includes but is not limited to exposure to changing temperatures, loud noises, and vibration from use of equipment and the following:
* Hazards: Variety of physical conditions, such as proximity to moving mechanical parts, electrical current, exposure to high heat or exposure to chemicals.
* Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin- fumes, odors, dusts, mists, gases or poor ventilation.
* Oils: There is air and/or skin exposure to oils and other cutting fluids.
Benefits
* Medical, Dental and Vision Insurance
* 401k with Company Match
* Paid Time Off
* Paid Holidays
* Paid Community Service Day
* Company Paid Life Insurance
* Company Paid Short-Term Disability
* Company Paid Long-Term Disability
* Tuition Reimbursement
* Wellness Programs
* Employee Assistance Program
About Us
At O'Neal Manufacturing Services (OMS), we build things! As an O'Neal Industries affiliate company, we are a leader in the fabrication of steel and metal products that shape the world in which we live in. Our culture is driven by honesty, integrity and respect. We set high expectations for ourselves in providing a safe and diverse work environment. If you are looking to be part of a dynamic company to build your career, visit onealmfg.com/careers to learn more!
OMS Greensboro is known as the manufacturing center of North Carolina for over 50 years. Greensboro is home to a 226,000 sq. ft. O'Neal Manufacturing Services (OMS) production facility. Our Greensboro, NC facility offers advanced manufacturing equipment and an experienced staff to support multi-step metal fabrication for many customers in the construction and heavy equipment industries. OMS Greensboro is ISO 9001: 2015 certified and is your "one-stop shop" supply chain solution, delivering high-quality fabrications on-time and at an affordable price.
MIG Welder & Fabricator
Welder fitter job in High Point, NC
This position is responsible for fabricating parts according to instructions and within specified time frame, using the appropriate tools and/or equipment according to safety and quality standards, as well as carrying out any other duties as directed by Team Leader or Supervisor. This position works from 6:45 AM to 5:30 PM, Monday to Thursday.
ESSENTIAL FUNCTIONS:
Pass AWS D1.1: 2020 Welder Test.
Understand and perform weld machine setup.
Understand and read blueprints.
Perform all Essential Functions of a Heavy Plate Structural Welder
Weld Press Brake Side plate, Lower Beams, and upper frames together to produce a frame ready for paint.
Train other employees on the tasks of a “Welding Apprentice.”
Maintain tools, equipment, and workspace.
Keep Management informed of status, issues, etc.
Manages Time and Resources.
Comply with established workplace policies.
Wear all required PPE.
Employees are to speak only English during an emergency and while performing job duties where there is potential for an emergency. The rule does not apply to casual conversations between employees when they are not performing a job duty.
Non-field related positions require in-person work up to 5 days a week at the assigned facility.
NON-ESSENTIAL FUNCTIONS:
Capable of performing all Essential Functions of a Heavy Plate Structural Welder
Contribute to team effort.
Maintain professional and technical knowledge.
Act on constructive feedback.
Improve processes.
Uphold work standards.
Accept positive criticism.
REPORTING RELATIONSHIP:
Lead Person
Welding Supervisor
Production Manager
SUBORDINATE STAFF:
None
KNOWLEDGE:
High School Diploma or GED
Experience working in manufacturing and production preferred.
Experience driving a forklift and using measuring tools preferred.
ISO and SAP experience is a PLUS
Previous Lead Person experience is a PLUS
SKILLS:
Excellent communication skills, both verbal and written.
Mathematical skills including tape measure down to the 1/32
Reasoning and Problem-solving skills.
Experience with Microsoft Office (Word and Excel).
Ability to design custom reports as requested.
TRAVEL:
Minimal to no travel required.
MENTAL ABILITIES:
Ability to work harmoniously with others.
Ability to accept and follow instruction.
Ability to maintain positive attitude.
WORKING CONDITIONS:
LIFTING: Up to 50 pounds unassisted
STANDING AND WALKING: Daily on cement flooring
FREQUENCY: Daily
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
Welder
Welder fitter job in Welcome, NC
Welders needed in Welcome, NC for 2nd shift! You will be responsible for welding metal parts with gas welding equipment as specified by layout, welding diagram, or work order. Must have Welding experience!
Call us now! l ************
Welder
Welder fitter job in Reidsville, NC
Full-time Description
For 50 years, BETA Fueling Systems in Reidsville, NC has led the aviation industry in the manufacture of reliable and safe refueling equipment. Everything we do is focused on improving the reliability, after sales support, and on-time delivery of equipment. To apply, please visit ****************************
Job Purpose:
We are looking for an experienced MIG/TIG Welder to join our team. The Welder will use hand-welding equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products to include but not limited to pressure vessels, pipes, frames, and brackets. Our Welders work in a team environment. Work hours are Monday - Friday, 7:00am-3:30pm with overtime required at times and occasional Saturday.
Education and Experience Required:
High School Diploma or GED preferred
3-5 years welding experience, MIT/TIG aluminum required, or post-secondary certificate in welding
Certification to AWS weld qualification (D1.1, D1.2, D1.3, etc...), highly preferred
Strong knowledge of arithmetic and fractions is a must
Ability to utilize measuring instruments such as tape measures, squares, protractors (digital & bubble), etc., to effectively set up and process weldments to engineering drawing dimensional requirements, along with properly documenting dimensional measurements to ensure conformance
General knowledge of machines and tools, including their designs, uses, repair, and maintenance
Familiar with industrial safety environment and use of common protective or safety equipment such as safety shoes, welding helmet, safety glasses, gloves, hearing protection, and hard hats (Beta will provide or reimburse)
Physical Requirements - using hands to handle, control or feel objects and tools, ability to read written instructions, lift and/or move materials up to 50 pounds independently
Exposure to loud noise, heat, cold, and moving mechanical parts in a manufacturing environment
Benefits:
BETA offers paid time off, 9 paid holidays, medical, dental, vision, life, and short-term and long-term disability insurance. We offer a 401(k) plan and flexible spending accounts to help manage your medical expenses. We offer a supportive team environment. Pre-employment drug screen and background check required.
BETA Fueling Systems, LLC. is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
Disclaimer Statement: This job description is not intended, nor should it be construed to be an exhaustive list of all responsibilities, duties, skills, or working conditions associated with a particular job. It is intended to be only a general description of the principal requirements common to positions of this type.
MNT-WELDER
Welder fitter job in Greensboro, NC
Fair Labor Standards Act Classification: Non-Exempt 12 month Classification: Continuing Time Basis: Full-Time Classified Benefits: Full Starting Salary: $16.91 per hour Pay Grade: 63 12 Month Salary Schedule Special Conditions: Possession of a valid class "C" driver's license issued by the state of North Carolina and must maintain a safe driving record.
Master Salary Schedule
MIG Welder I - Night Shift - O'Neal Manufacturing Services
Welder fitter job in Greensboro, NC
Duties and Responsibilities
Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques.
Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.
Inspects completed welds to determine structural soundness.
Familiar with and complies with all safety requirements and protocols.
May prepare the materials and set up for a welding device or robot.
May be required to complete an apprenticeship and/or formal training in area of specialty.
Support the safety and quality programs by following all accompanying rules and established processes.
Other duties as assigned.
Shift
B Crew/Shift: 5:30 PM- 6:00 AM, Overtime as needed.
Schedule: Rotating/4 days on; 4 days off
Shift Premium: $3.00 per hour
Skills and Qualifications
Ability to operate forklift and cranes.
Ability to read and interpret simple blueprints.
Ability to use a variety of hand tools such as hammer, pliers, screwdriver, wrench, drill, grinder and bander.
Ability to use measuring tools such as tape measure, box caliper, slide dial caliper and micrometer.
Ability to convert fractions to decimals and vice versa.
Ability to convert metric to English.
Provide high quality work to all internal and external customers as related to the output of their position.
Capable of setting up and operating one or more processing machines.
Speak, write and comprehend conversational English.
Strong attention to detail.
High School Diploma or equivalent (preferred).
Must pass a MIG welder certification.
Relevant apprenticeship, experience, or vocational training, preferred.
Physical Requirements
Ability to lift 20-50 lbs. repetitively throughout the course of a shift.
Ability to bend, sit, stand, twist and stoop for long periods of time.
Ability to walk 2-5 miles throughout the course of a shift.
Have good vision of 20/30 with corrective lenses.
Ability to maintain coordination of hand and finger movements to grasp and manipulate objects with precision.
Subject to environmental conditions that occur indoors and outdoors which includes but is not limited to exposure to changing temperatures, loud noises, and vibration from use of equipment and the following:
Hazards: Variety of physical conditions, such as proximity to moving mechanical parts, electrical current, exposure to high heat or exposure to chemicals.
Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin- fumes, odors, dusts, mists, gases or poor ventilation.
Oils: There is air and/or skin exposure to oils and other cutting fluids.
Benefits
Medical, Dental and Vision Insurance
401k with Company Match
Paid Time Off
Paid Holidays
Paid Community Service Day
Company Paid Life Insurance
Company Paid Short-Term Disability
Company Paid Long-Term Disability
Tuition Reimbursement
Wellness Programs
Employee Assistance Program
About Us
At O'Neal Manufacturing Services (OMS), we build things! As an O'Neal Industries affiliate company, we are a leader in the fabrication of steel and metal products that shape the world in which we live in. Our culture is driven by honesty, integrity and respect. We set high expectations for ourselves in providing a safe and diverse work environment. If you are looking to be part of a dynamic company to build your career, visit onealmfg.com/careers to learn more!
OMS Greensboro is known as the manufacturing center of North Carolina for over 50 years. Greensboro is home to a 226,000 sq. ft. O'Neal Manufacturing Services (OMS) production facility. Our Greensboro, NC facility offers advanced manufacturing equipment and an experienced staff to support multi-step metal fabrication for many customers in the construction and heavy equipment industries. OMS Greensboro is ISO 9001: 2015 certified and is your “one-stop shop” supply chain solution, delivering high-quality fabrications on-time and at an affordable price.
Welder 1
Welder fitter job in Eden, NC
Building the people that build the world.
With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our Rise talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company with problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world.
This is a position with WM Technologies, LLC and affiliate of SPX Enterprises, LLC, which manufactures and sells Weil-McLain branded products. Weil-McLain is a leading North American brand of hydronic comfort heating systems for residential, commercial, and institutional buildings since 1881.
SUMMARY:
Welder performs welder operations including MIG and TIG and Spot /Resistance Welding. THIS IS 2ND SHIFT POSITION
ESSENTIAL DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS):
Perform functions necessary as prescribed by Work Order and Blueprint.
Interpret Blueprint and set-up equipment so that quality components to specification are produced with minimal input from others.
Perform First Piece inspection as needed.
Set-up Weld Jigs as available. If not available, be able to fixture parts with miscellaneous holding techniques in order to produce a part within specification.
Set-up and adjust MIG, TIG or Spot Welding equipment, and troubleshoot poor quality welds.
Perform post weld grinding operations, so as to achieve a quality straight line finish so that final painted parts will pass Quality Inspections.
Perform welding of seams, joints and fill openings in panels; fitting pieces to assure proper alignment.
Analyzes engineering drawings and specifications to plan layout, assembly, and welding operations.
Determines required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques.
Work on other Fabrication and paint equipment as needed.
EDUCATION, EXPERIENCE & CERTIFICATION:
Welding certification or equivalent preferred.
KNOWLEDGE, SKILLS AND ABILITIES:
Welding certification or equivalent preferred.
Blueprint reading and mechanical abilities.
Must be able to Weld Cold Rolled Steel, Stainless Steel, Galvanized and Aluminized Steel products with appropriate welding process.
Must be able to and have experience in setup and operation of MIG, TIG, and Spot/Resistance welders.
Must be able to read calipers and other metrology equipment.
Strong math skills (decimals, fractions, use of calculator).
Welds all types of materials.
Must be able to set-up weld jigs and use various clamping methods to produce prototypes.
Some computer knowledge.
Ability to perform moderate PM procedures.
Able to understand production planning requirements.
Must have excellent attendance record.
Welders can expect long hours on their feet, often in hot conditions.
Must be able to see flaws in welds or structural imperfections in the metal.
COMPETENCIES:
Ability to safely and efficiently set up and operate MIG, TIG, and spot welding equipment
PHYSICAL DEMANDS:
Standing for extended periods of time
Able to lift up to 50lbs
WORK ENVIRONMENT
:
Production Floor
DISCLAIMERS:
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.
WEIL-McLAIN VALUES:
All Weil-McLain divisions are committed to the effective use of the Weil-McLain. It is important that all employees understand and utilize these values when performing the duties of his/her position.
QUALITY:
Quality encompasses all aspects of Weil-McLain business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process, and the quality system. All employees have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions.
How we live our culture
Our culture is at the center of what we do, and more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads.
What Benefits do we offer?
We know that the well-being of our employees is integral. Our benefits include:
Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave
Competitive health insurance plans and 401(k) match, with benefits starting day one
Competitive and performance-based compensation packages and bonus plans
Educational assistance, leadership development programs, and recognition programs
Our commitment to embrace diversity to build a culture of inclusion
We value different backgrounds, experiences, and voices, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential.
We are an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.
SM - Welder (Job Specific Upon Hire)
Welder fitter job in Durham, NC
Job DescriptionFull TimeDay ShiftPossible OTCompetitive Pay McCorvey Sheet Metal is a family-owned and operated company with locations in Houston, Austin, San Antonio, Dallas, Orlando, Raleigh, Charlotte, and Nashville - McCorvey Sheet Metal Works, L.P. is a detailer, fabricator, and installer of HVAC sheet metal ducts. McCorvey works primarily on larger projects such as healthcare facilities, research labs, sports stadiums, hospitality, government, education, and many other vertical markets. We want to meet you if you have experience assembling, installing, and welding sheet metal ductwork! Welders provide their own welding hood, but the company will provide any special PPE for special welding needs, welding gloves, and vests. We are seeking Sheet Metal Welders with the following experience to join our team!*** MUST BE WILLING TO TRAVEL ***Job Responsibilities:
Technically skilled welder with good attention to detail. Will weld galvanized, aluminum, black iron, 304 and 316 stainless steel with TIG & MIG procedures
Utilize and interpret blueprints to determine how and where to fabricate, assemble and install sheet metal ductwork.
Use hand and power tools to trim, buff, smooth, file, and grind metal surfaces and joints of parts that have been assembled to ensure safety and a seamless appearance.
Install assemblies, including pipes, HVAC ductwork, exhaust stacks, etc.
Ensure that efficiency is maximized while fabricating and installing HVAC systems.
Verify the appropriate type and gauge of sheet metal to be used in projects according to specifications.
Ensure safety is a priority on the job during all activities, including using tools and installing and welding ductwork.
Requirements:
Sheet metal ductwork welding and installation 5+ years
High school diploma or GED
Must pass a drug screen, background, and physical.
Basic math skills
Provide own welding hood and sheet metal ductwork tools.
Tools:
Welding hood
Sheet metal hammer
Snips
Cheaters
Hand tongs
Tape measure
Basic hand tools
Perks of the Trade:
Health Benefits
Weekly Pay
Referral Bonuses
401k
Profit Sharing Program
7 Paid Holidays
Years of Service Appreciation Program
2nd Shift MIG Welder
Welder fitter job in High Point, NC
open.
Responsibilities:
Expected to take initiative & be proactive.
Able to read & understand shop orders, production schedules & follow written or verbal instructions.
MIG Welding
Meet & exceed the expectations (safety, quality, & productivity).
Report issues to maintenance as needed and make supervisor aware.
Able to read blue prints, to identify fixtures needed, to identify good/bad welds, to be cross trained in all areas.
Build ahead items based on weekly schedule to support logistic operations.
Do touch ups as needed form outcome coming out its cell/paint line, ID tag outcome material, raw materials at work cell.
All other duties as required.
Requirements:
Ear protection and safety glasses are required.
Steel toe shoes are required.
Job Location: High Point, NC
For more information:
Call : ************
Email: ********************
Apply on our website: *******************
Job Type: Full-time
Pay: $16.40 per hour
Certificate Welder $17.40 per hour
Shift:
8 hour shift
Evening Shift: 2:45pm to 11:30pm Monday through Friday
Work Location: High Point NC
Job Type: Full-time
Experience:
MIG Welding: 2 years (Required)
Manuel Welding: 2 years (Required)
Blueprint reading: 1 year (Required)
Location:
High Point, NC (Required)
Work Location: On the road
Easy ApplyMIG Welder
Welder fitter job in Thomasville, NC
Job Requirements.
Welders must provide their own welding hood.
Will need to provide a resume.
Must interview and pass a standard welding test.
Job Responsibilities:
Properly use safety equipment.
Be aware of fire hazards.
Know the health and safety hazards associated with welding.
Be familiar with proper setup procedures for welds.
Operate the mig welder safely and efficiently.
Evaluate completed welds for quality.