Welder fitter jobs in Galveston, TX

Main Purpose: To perform job functions required and assigned in the fabrication of structural/ piping materials per the contract/job specifications and quality assurance requirements/fitting procedures and established ISO/QC program standards. The Welder's job duties are to properly weld structure or pipe. Essential Functions: * Set and operate welding machine for applicable welding processes. * Perform welding processes assigned for structural, pipe, and welding projects. * Pass required welding test per AWS D1.1 latest edition, ASME section IX, and API 1104. * Maintain quality of welding that can pass NDT testing procedures. * Perform welding assignments safely and efficiently, always practicing safety. * Operate appropriate hand tools (chipping hammers, grinders, etc.) * Weld separately or in combination, using aluminum, stainless steel, cast iron, carbon steel, and other alloys. * Select and install torches, torch tips, filler rods, and flux according to welding chart specifications or any thickness of metals. * Determine required equipment and welding methods, applying knowledge of welding techniques. * Connect and turn regulator valves to activate and adjust gas flow and pressure to obtain desired flames. * Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking distortion, or expansion of the material. * Expertly welds small, medium, and large structural and pipes of various metals and alloys. * Expertly welds small, medium, and large structural items. * Be able to weld structure (beams, grating, stairways) and pipe. * Transport welding equipment in the yard to the work area. Benefits Offered: * Earned Wage Access * Health, Dental, and Vision Insurance * 401(k) with Company Match * Paid Holidays * Paid Vacation * Life Insurance * Disability Insurance * Safety Awards * Company Store * Employee Assistance Program (EAP) Requirements Physical Requirements: * Standing: This is an essential job function/physical requirement. * Walking: This is an essential job function/physical requirement. * Turning, twisting, bending, and stooping- These physical requirements are essential job functions. * Pushing and Pulling- These physical requirements are essential job functions. * Reaching, forward, and overhead are essential job functions /physical requirements. * Climbing: This is an essential job function /physical requirement. * Balancing, fingering, feeling, talking, hearing, and seeing- These are all considered regular physical duties/requirements and would be needed/required to work in this industrial environment safely and efficiently. * Lifting - employees must lift to 25 pounds and occasionally 50-75 pounds. Job Requirements: * Must successfully demonstrate the ability to pass a practical welding test. * Must have a minimum of 2 years of experience. * Must be able to pass pre-employment physical and drug screen. * Must be able to pass a background check. * Ability to communicate effectively, both verbally and in writing. * TWIC card Desirable Experience, Education, and Training: * Highschool diploma or GED. Tools, Equipment, and Technology: * Welders must have knowledge of and use: welding machines, man lifts, chipping & grinding equipment, cutting torches, welding leads, welding whips, and welding guns. * All applicable safety equipment used to perform their everyday welding duties (welding shields, goggles, hard hats, etc.) Environmental Conditions: 80% to 90% of the work activities are performed outdoors. Individuals will be required to work in changes of temperature, hot, cold, humid, wet, and dry conditions, dust, mud, etc. They may also be exposed to fumes (Paint, paint thinners, diesel, /or gas, etc.) Gulf Island will not sponsor applications for work visas. Additionally, applicants for employment with Gulf Island must be currently authorized to work in the United States on a full-time basis. Accordingly, Gulf Island will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Gulf island is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Gulf Island employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Gulf Island. No recruiting placement fee will be paid in the event Gulf Island hires the candidate due to the referral or through other means.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Project Pipe Welder B As a Pipe Welder, you will set up, operate and adjust manual and/or automatic machines to perform welding operations in all positions Additional Information: Urgently hiring Multiple openings This is a supplemental position located at the Solar Turbines manufacturing facility located in Channelview, TX No relocation package is available Job Duties/Responsibilities may include, but are not limited to: Perform Manual finish welding operations on carbon and stainless steel in all positions Follow documented procedures and standard work to perform safe and defect free operations Perform carbon arc cutting and gouging Sanding may be required to prepare and dress welds Use of forklifts, pallet jacks, jib and overhead cranes to move and position work pieces Required Qualifications: Must be able to pass multiple welder qualification tests Minimum of 6 months of experience in a production environment Ability to perform simple computer operations Be available to work 1st or 2nd shift Ability to work overtime to support production demands, including weekends Desired Qualifications: One (1) to three (3) years of GTAW and FCAW welding experience Top Candidates: Good Communication Skills and strong commitment to safety, quality, and teamwork Combination Welder and Fitter Leadership Experience Ability to work well individually or in a team environment **Candidates may be placed on any shift, dependent on business needs** Summary Pay Range: $25.48 - $38.22 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. Competitive salary and annual bonus program Medical, dental, and vision coverage Paid time off plan (Vacation, Holiday, Sick, Etc.) Health savings account (HSA) Flexible spending accounts (FSAs) Life Insurance Employee Assistance Programs Voluntary Benefits (Ex. Accident, Identity Theft Protection) There will be cross-training and qualifications-based opportunities to earn up to an additional $2 per hour, with any night shift activity qualifying for another $3 per hour. Potential base salary increases from annual performance reviews All eligible candidates MUST pass the following pre-employment screenings before they can be hired to any position: Background Screening Physical and drug/alcohol screening Solar is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. As a global company, Solar offers many job opportunities outside of the U.S. which can be found through our employment website at ********************************************************* Please ensure you frequently check the email account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. EEO/AA Employer. All qualified individuals - Including minorities, females, veterans and individuals with disabilities - are encouraged to apply. Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job Description Are you a talented welder looking to travel and work on exciting projects across the country? Tanco Engineering wants to hear from you! With over 40 years in the industry, we're proud of our reputation for safety, reliability, and excellence. As a Storage Tank Welder with us, you'll play a critical role in ensuring the quality and safety of storage tanks. You'll join a friendly team that values your skills and contributions while giving you the chance to work in varied locations, meeting new people, and tackling interesting challenges. At Tanco Engineering, we believe in teamwork and open communication. You won't just be a number; you'll be a valued part of our family. So, if you're ready for an opportunity to shine, let's make it happen! Position Duties: Utilize your welding skills to ensure the structural integrity of storage tanks through various techniques like stick and flux core welding. Read and interpret blueprints to ensure your welding tasks meet all specifications. Inspect your work for quality control, promptly addressing any issues you may uncover. Work alongside your team to ensure projects are completed efficiently and on time. Maintain a safe work environment by following all safety protocols. Keep your welding equipment in top shape with routine maintenance and troubleshooting as needed. Requirements At least a year of welding experience, ideally in the storage tank industry. Attention to detail with a skill for spotting potential defects. A willingness to lift heavy equipment and engage in physically demanding tasks. Strong communication abilities coupled with a collaborative spirit. A passion for travel and the flexibility to work in various locations. A TWIC card might be required Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Background checks will also be included in the hiring procedure. Must be over 18 and eligible to work in the United States. Benefits Medical, dental, & vision insurance Retirement plan & ESOP Competitive pay with annual reviews. Join our team and enjoy competitive starting pay of $30-$34 per hour, which may vary depending on your experience and the results of your welding test. In addition to the attractive pay range, we offer a subsistence allowance of $125 (exceptions may apply per location) and reimbursement of $0.70 per mile for travel (when applicable).

**Job Title: Aluminum Welder** **Job Description** We are seeking a skilled aluminum welder to join our team. In this role, you will utilize MIG spool gun and TIG welding techniques to fabricate and weld aluminum structures and piping. You will also be required to weld other materials such as carbon and stainless steel when aluminum work is not available. Your primary responsibility will be to fit, cut, assemble, and weld materials according to blueprints to build our equipment. **Responsibilities** + Weld aluminum structures and piping using MIG spool gun and TIG welding techniques. + Fabricate materials by fitting, cutting, assembling, and welding according to blueprints. + Perform welding on carbon and stainless steel when aluminum work is not available. + Ensure all welding work meets quality and safety standards. **Essential Skills** + 5+ years of welding experience. + 3+ years of experience in welding aluminum. + Proficiency in MIG welding, flux core welding, and aluminum fabrication. **Additional Skills & Qualifications** + Ability to perform light fitting. + Experience in TIG welding. + Capability to weld pipe. **Why Work Here?** Our workplace is a nice, clean shop with plenty of projects to keep you engaged and busy. We offer good internal benefits, making it a rewarding place to work. **Work Environment** The work environment is an open-aired shop, operating from 6am to 5pm, Monday to Friday, with Saturdays as needed. **Job Type & Location** This is a Contract to Hire position based out of Houston, TX 77032. **Pay and Benefits** The pay range for this position is $28.00 - $33.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Houston,TX 77032. **Application Deadline** This position is anticipated to close on Dec 31, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Dayshift: Monday - Friday 6: 00am - 4: 45pm - Saturday and Sunday if required 5: 00am - 1: 00pm Nightshift: Monday - Friday 4: 00pm - 2: 00am - Saturday and Sunday if required 1: 00pm - 9: 00pm In this intermediate level role, the welder joins, fabricates and repairs metal and other weldable material by applying appropriate welding techniques. The welder welds together pipe fittings and metal components as specified by isometrics, work orders or verbal instructions. Principle Duties & Responsibilities Be capable of performing all aspects of the Process Install Department. The ability to operate the Drill Press, Iron Worker, Band Saw, Manual Press Brake, Track Torch Must be able to pass certification to operate the following lifts: Man lift, Forklift, Ballymore, Scissor Lift to be able to perform welding on upper structures. The ability to use a Jib crane and overhead crane (dual and single hoists) The ability to safely utilize power and air tools (Die Grinders, angle grinders, comb grinders, jitterbug, electric disc grinders, air blowers) The ability to use the Cutting Torch. The ability to use the Plasma Cutter. Responsible for observing and complying with all safety and project rules. EE will align with EFX visions and values. Perform other duties as required. Qualifications: High School Diploma/GED or 1-year technical diploma/vocational certificate desired. Minimum of 2 - 4 years of relevant industrial experience required. Perform and pass visual 3G welding test (bend test will also be performed). Be able to weld on aluminum sheets (MIG and TIG). Must be able to read and interpret all engineering drawings in order to efficiently perform work. Be able to pull measurements and convert to a drawing and be able to create the layout for the project. Relies on experience and judgment to plan and accomplish goals. Works under general supervision. Working Conditions: Industrial environment. This role will require a large amount of standing, bending, squatting, lifting, and walking on a constant basis. May be required to lift, carry, and move up to 50 lbs. Many tasks have high degrees of time sensitivity.

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

Temp Job Order # 56244 Branch: 49 TMD Staffing is looking to hire a Pipe Welder in the 77040, Northwest side of Houston! WORK ENVIRONMENT In-Person, Shop RESPONSIBILITIES Weld on pipe, TIG, MIG, Fluxcor Operate hand held weld gun and plasma machine Apply certification stamps on weld area Manually move product along table and in/out of machinery Operate pneumatic bander Complete training curriculum to be certified QUALIFICATIONS 2 years experience with pipe welding, TIG, MIG, Fluxcor Basic math skills, decimals, tape measure increments PAY $18-22/hour, depends on test results SCHEDULE Monday-Friday, day shift, plus weekends as needed WHO IS TMD STAFFING? TMD Staffing is a trusted provider of staffing and recruiting services in Texas and Maryland for over 25 years. Our team works closely with job seekers to help them identify and land the right jobs for them. With TMD Staffing, you can get your foot in the door at top employers and choose from temporary, temporary-to-hire, and direct-hire jobs. Whether your goal is immediate income or a long-term career strategy, our experts are here to assist. For more information about our positions, please give TMD Staffing Northwest a call at ************. Apply online (******************** or email your resume to ******************* for immediate consideration. #TMDHMG 18.00

Pipe Fitter/Welder About PROENERGY PROENERGY is a global and vertically integrated energy transition platform. Focused exclusively on fast-start, dispatchable power, our company supports both energy security and renewable growth with complete turbine services, project development, equipment manufacturing, turnkey generation facilities, operations, and maintenance. Our Footprint We are primed for the energy transition with permanent service locations in Missouri, Texas, and Argentina. Our world-class Missouri headquarters is purpose-built to meet dispatchable power needs. It sits on 90 acres in Sedalia and features more than 600,000 sq. ft of service capacity under roof, which includes the only independent Level-IV aeroderivative depot and string-test facility in the world. Our Houston, Texas, office is a strategic satellite positioned near our own dispatchable power installations. Our Philosophy We take care of our people and strive to make a positive difference for the world. We offer competitive pay, excellent benefits that include Medical, Dental, Vision, and Life/Disability Insurance at minimal cost to the employee, 10 paid holidays, paid time off, and a 401K plan. If you are looking for a rewarding career and possess specialized knowledge and quality-oriented problem-solving skills, we encourage you to apply today. Assemble, weld, install, and maintain piping systems and related equipment for manufacturing and industrial production systems. This role involves interpreting complex drawings, performing precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping, and ensuring that all work meets stringent ASME codes, safety requirements, and quality standards.Assemble, weld, install, and maintain piping systems and related equipment for manufacturing and industrial production systems. This role involves interpreting complex drawings, performing precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping, and ensuring that all work meets stringent ASME codes, safety requirements, and quality standards. Reports To: Fabrication Manager Work Location: 6246 McHard Road, Houston, TX 77053 Please note this is full-time day shift position 100% based at our facility in Sedalia, MO. As such, there are no travel requirements or per diems. Position Responsibilities Read and interpret 2D and 3D piping drawings, isometrics, P&IDs, and ASME code specifications to plan fabrication and installation of piping systems. Cut, fit, weld, and assemble pipe spools and components to specified dimensions and tolerances using appropriate tools and welding processes in compliance with ASME requirements. Maintain accurate weld maps and documentation for all fabricated pipe spools and assemblies, ensuring traceability for ASME code compliance. Requisition and manage tools, equipment, and materials necessary for each project phase, coordinating with supervisors and procurement as needed. Install pipe supports, valves, flanges, couplings, and fittings to connect piping systems to machinery, tanks, pumps, and process equipment per ASME B31.1/B31.3 standards. Conduct inspections, hydrostatic testing, and other quality verification procedures to ensure systems meet ASME and customer specifications. Ensure adherence to all safety, environmental, and quality control policies and procedures. Precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping Read and interpret 2D and 3D piping drawings, isometrics, P&IDs, and ASME code specifications to plan fabrication and installation of piping systems. Cut, fit, weld, and assemble pipe spools and components to specified dimensions and tolerances using appropriate tools and welding processes in compliance with ASME requirements. Maintain accurate weld maps and documentation for all fabricated pipe spools and assemblies, ensuring traceability for ASME code compliance. Requisition and manage tools, equipment, and materials necessary for each project phase, coordinating with supervisors and procurement as needed. Install pipe supports, valves, flanges, couplings, and fittings to connect piping systems to machinery, tanks, pumps, and process equipment per ASME B31.1/B31.3 standards. Conduct inspections, hydrostatic testing, and other quality verification procedures to ensure systems meet ASME and customer specifications. Ensure adherence to all safety, environmental, and quality control policies and procedures. Precision pipe fitting and welding primarily on Small-Bore Stainless-Steel Piping Required Qualifications High school diploma or GED, or equivalent relevant experience. Minimum of 3-5 years of pipe welding and fitting experience in an industrial or manufacturing environment. Journeyman-level pipefitting or welding certification (or equivalent training and experience). Familiarity with ASME welding procedures and B31 piping codes. US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa. Candidate must also pass a State and Federal criminal history/security background check and pre-employment drug screen. Desired Qualifications Proven ability to troubleshoot piping system and equipment issues. Experience reading and interpreting P&IDs, process flow diagrams, and isometric piping drawings. Working knowledge of ASME, AWS, and other relevant welding and piping codes. Familiarity with manufacturing processes, process controls, and plant utilities. Proficiency in using welding and pipefitting tools, measuring instruments, and related equipment. Ability to work at heights, in confined spaces, and in various environmental conditions. Strong commitment to safety practices and use of PPE (hard hat, steel-toe boots, safety glasses, respirators, hearing protection). Essential Job Functions Ability to walk manufacturing and construction sites, climb ladders and stairs, and work on uneven surfaces. Ability to lift at least 50 lbs. and work in a variety of positions (standing, kneeling, overhead). Daily use of welding equipment, forklifts, hand tools, and computers for job documentation and communication. It is PROENERGY's policy to provide equal opportunity in employment to all its employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, national origin, marital status, ancestry, medical condition, military status, or any other characteristic protected by State or Federal law.

Job Summary/Objective: The Pipe Welder will be responsible for welding, cutting, and brazing metal components using various welding techniques, including flame-cutting and hand-welding equipment. The role requires proficiency in a variety of welding processes and the ability to work with both carbon and stainless steel pipes. Key Duties and Responsibilities: Interpret blueprints, drawings, and technical specifications to ensure accurate welds (minimum 1-2 years of experience required). Use measuring tools (e.g., tape measure, level, squares) to verify dimensions and ensure precision. Weld using GTAW (TIG), GMAW (MIG), and FCAW processes, with at least 2-5 years of experience in these techniques. Work with schedule 10 and schedule 40 carbon and stainless steel piping, ranging from 3" to 24" in diameter. Utilize positioners and other tools to support welding on piping. Inspect and assess welds for quality, strength, and safety compliance. Weld in various positions, including 1G, 5G, and 6G. Follow all safety protocols and enforce safety standards on-site. Operate welding machinery and monitor its temperature and usage to ensure optimal performance. Safely operate an overhead crane for material handling. Required Skills and Abilities: Strong knowledge of welding machinery, tools, and techniques, including their design, maintenance, and repair. Ability to read and interpret blueprints, technical drawings, and welding designs. Basic understanding of mathematics as it relates to welding assignments, including geometry and measurements. Ability to follow verbal and written instructions with exceptional attention to detail. Excellent communication skills, both written and verbal, to collaborate effectively with team members and supervisors. Must have FCAW (Flux-cored Arc Welding) and GMAW (MIG welding) certification Must have at least 3 years of experience. Education and Experience: Certification in welding from an accredited institution is preferred. Knowledge and hands-on experience with MIG, TIG, and flux-core welding processes. Minimum 1-2 years of experience in welding, particularly with pipe and structural components. Physical Requirements: Ability to weld components in various positions (flat, vertical, overhead). Sufficient manual dexterity and stability to perform precision work. Good visual acuity to inspect welds and materials up close. Ability to lift up to 25 pounds as needed. Ability to traverse job sites, including climbing, balancing, stooping, and carrying materials. Additional Information: FLSA Status: Non-exempt Job Status: Full-time Note: This job description is intended to provide a general overview of the position's responsibilities and requirements. It is not exhaustive, and additional duties may be assigned as necessary. Responsibilities may change at any time, with or without notice.

Performs duties assigned by the supervisor and/or lead man including but not limited to grinding; sanding; and stocking weld work stations, completing part fabrication and fit up for welders and maintaining a clean work environment. The employee holding this job must perform the work activities in a correct, accurate and timely fashion. Marginal job functions: * Replace or assist other workers as needed * Perform other tasks as assigned by supervisor Knowledge, skills and abilities: Individual must posses knowledge, skills, and abilities or be able to demonstrate that the individual can perform the essential functions of the job, with or without reasonable accommodations, using some combinations of skills and abilities. Minimum knowledge, skills, and abilities for this position are: * Ability to carry out not only simple but complex oral and written instructions and deal with problems from standardized situations and work experience. * Ability to communicate well with supervisors, lead-man, and other co-workers. * Ability to read blue prints and or drawings. * Lifting, carrying, pushing, pulling and/or moving of 75 pounds and over, with frequent lifting and/or carrying odd shaped objects weighing up to 75 pounds, and up to 50 pounds of force constantly to move objects. * Ability to comprehend additional training in relation to the performing of the work duties. Physical demands: Most of the work tasks (90 %) are performed in-door and subjected to environmental and weather condition changes. Hours: 8 to 10 hours per day. Week: 40 to 50 hours per week, sometimes more. Lunch: Half hour. Sitting: 25% of the time in an awkward position - not in the normal sitting position, such as sitting on a chair. Stands: 75% of the time. Environment: * Exposed to dust, heat, humidity, fumes, cold and dampness when working outside. Shop is not air-conditioned. Physical task: * Must climb and work at heights over 5 feet. * Must climb ladders * Must push and pull heavy weights while performing job duties. * Must walk around the department and plant area to perform daily work. Stress: * May work extended hours to meet work demands. * Requires high degree of concentration * May work continuously several hours without a break. * May work in small areas. * Must stand on hard surfaces to perform work task. * Must perform work in awkward positions-vertical, horizontal, and overhead positions. * May work quickly and have pressure of deadlines and production demands. * Must stay focused on the work at hand while performing safely. Other Ergonomics Requirements: The position of Welder helper is a physically demanding job. The functions performed ordinarily involve: extending hands and arms in all directions, holding, grasping, pressing, turning objects using hands, picking, lifting, pinching, or otherwise working with fingers. Other Specifications and Requirements: Employee must observe and comply with all Safety policy and procedures. * Demonstrates safe, productive job performance. * Meets the company standards. Qualifications Standards: Must have experience in a welding shop environment Performance Standards: The criteria for evaluation in this position include, but are not limited to, the following: * Ability to perform work according to routine, while maintaining standards of performance. * Proper operation of equipment.

Job DescriptionFull-time Welder Helper We are seeking a skilled and dedicated Full-time Welder Helper to join our dynamic team. The ideal candidate will play a crucial role in supporting our welding operations, ensuring efficiency, quality, and safety in all projects. This position offers an excellent opportunity for individuals looking to build a career in the welding industry and gain hands-on experience with various welding techniques and materials. Key Responsibilities Assist welders in preparing materials, equipment, and work areas for welding projects Read and interpret blueprints, technical drawings, and work orders to understand project requirements Measure, cut, and shape materials according to specifications Set up welding equipment, including power sources, electrodes, and gas supplies Clean and prepare metal surfaces for welding Hold and position workpieces during welding operations Perform basic welding tasks under supervision Conduct post-weld cleaning and finishing operations Inspect completed welds for quality and adherence to specifications Maintain a clean and organized work area Adhere to all safety protocols and procedures Assist in inventory management of welding supplies and materials Participate in ongoing training and skill development programs QualificationsRequired: High school diploma or equivalent Proficiency in basic welding techniques Ability to read and interpret blueprints and technical drawings Strong attention to detail and commitment to quality Excellent hand-eye coordination and manual dexterity Physical ability to lift and move heavy materials (up to 50 lbs) Willingness to work in various environmental conditions (heat, cold, noise) Basic math skills for measurements and calculations Strong communication and teamwork skills Reliable transportation and ability to work flexible hours when needed Preferred: Completion of a welding program or apprenticeship Previous experience as a welder helper or in a similar role Familiarity with various welding processes (MIG, TIG, Stick) Knowledge of metallurgy and material properties Experience with computer-aided design (CAD) software Forklift certification Detailed Role Description As a Full-time Welder Helper, you will be an integral part of our welding team, supporting skilled welders in various projects across our organization. Your primary focus will be on preparing materials, assisting with equipment setup, and ensuring a smooth workflow throughout the welding process. Material Preparation: One of your key responsibilities will be to prepare materials for welding projects. This involves carefully reading and interpreting blueprints and technical drawings to understand the specific requirements of each job.

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. Role overview: Handles welding and fitting both mild steel and stainless steel, welding parts together using both gas welding or brazing and any combination of arc welding processes. Performs thermal cutting and grinding, repairing broken or cracked parts, filling holes, increasing the size of metal parts. Position Responsibilities: Must be able to utilize both MIG and TIG Order and receive parts and supplies as needed Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous wastes Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety Ability to wear a respirator Performs miscellaneous duties as assigned Qualifications: Possess both welding and fitting skills Ability to operate an acetylene torch Read and comprehend measurements, and job sheets Worked in an industrial setting High school diploma or GED Welding Certificate is a plus, but not required LOCATION: Channelview, TX DCI Benefits: Medical, dental and vision Insurance 401(k) with generous employer match Paid time off, including 10 paid holidays Optional health savings account & flexible spending account Life insurance Employee assistance program Parental leave Referral program Tuition reimbursement

All Tex is hiring experience welders!! Duties & Responsibilities: Demonstrated skills using MIG and TIG welding processes. Welding components in flat, vertical, or overhead positions. Adhere to safety procedures and process. Examining work pieces for defects and measure work pieces with straightedges templates to ensure conformance with specifications. Welding separately or in combination, using aluminum, stainless steel and Steel Carbon. Receives instructions, prints, and work orders for the job. Plans details of working procedure and tools and material requirements. Fabricates equipment by cutting, burning, and welding various metals. Cleans and prepares surfaces to be welded. Sets up, assembles, and tacks weld parts. Builds up worn or defective surfaces. Uses burning equipment to dismantle assemblies and to cut material to size and shape. Perform related duties as assigned. Skills & Requirements: GED or High School diploma required, certificate from a technical or vocational school is preferred. Understand and apply welding techniques and ability to operate welding equipment with skill Steel/Aluminum experience is preferred Fabrications with welding and layout Candidates are given a written & hands-on weld test prior to the position being offered. The welding to be performed at the customer's facility for repairs to Fuel Haulers, also referred to as Rolling 18-Wheeler Tanks. Candidates should have tools and equipment. Package Details

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR DGkT4Y3YeD

Full-time Description Main Purpose: To perform job functions required and assigned in the fabrication of structural/ piping materials per the contract/job specifications and quality assurance requirements/fitting procedures and established ISO/QC program standards. The Welder's job duties are to properly weld structure or pipe. Essential Functions: Set and operate welding machine for applicable welding processes. Perform welding processes assigned for structural, pipe, and welding projects. Pass required welding test per AWS D1.1 latest edition, ASME section IX, and API 1104. Maintain quality of welding that can pass NDT testing procedures. Perform welding assignments safely and efficiently, always practicing safety. Operate appropriate hand tools (chipping hammers, grinders, etc.) Weld separately or in combination, using aluminum, stainless steel, cast iron, carbon steel, and other alloys. Select and install torches, torch tips, filler rods, and flux according to welding chart specifications or any thickness of metals. Determine required equipment and welding methods, applying knowledge of welding techniques. Connect and turn regulator valves to activate and adjust gas flow and pressure to obtain desired flames. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking distortion, or expansion of the material. Expertly welds small, medium, and large structural and pipes of various metals and alloys. Expertly welds small, medium, and large structural items. Be able to weld structure (beams, grating, stairways) and pipe. Transport welding equipment in the yard to the work area. Benefits Offered: Earned Wage Access Health, Dental, and Vision Insurance 401(k) with Company Match Paid Holidays Paid Vacation Life Insurance Disability Insurance Safety Awards Company Store Employee Assistance Program (EAP) Requirements Physical Requirements: Standing: This is an essential job function/physical requirement. Walking: This is an essential job function/physical requirement. Turning, twisting, bending, and stooping- These physical requirements are essential job functions. Pushing and Pulling- These physical requirements are essential job functions. Reaching, forward, and overhead are essential job functions /physical requirements. Climbing: This is an essential job function /physical requirement. Balancing, fingering, feeling, talking, hearing, and seeing- These are all considered regular physical duties/requirements and would be needed/required to work in this industrial environment safely and efficiently. Lifting - employees must lift to 25 pounds and occasionally 50-75 pounds. Job Requirements: Must successfully demonstrate the ability to pass a practical welding test. Must have a minimum of 2 years of experience. Must be able to pass pre-employment physical and drug screen. Must be able to pass a background check. Ability to communicate effectively, both verbally and in writing. TWIC card Desirable Experience, Education, and Training: Highschool diploma or GED. Tools, Equipment, and Technology: Welders must have knowledge of and use: welding machines, man lifts, chipping & grinding equipment, cutting torches, welding leads, welding whips, and welding guns. All applicable safety equipment used to perform their everyday welding duties (welding shields, goggles, hard hats, etc.) Environmental Conditions: 80% to 90% of the work activities are performed outdoors. Individuals will be required to work in changes of temperature, hot, cold, humid, wet, and dry conditions, dust, mud, etc. They may also be exposed to fumes (Paint, paint thinners, diesel, /or gas, etc.) Gulf Island will not sponsor applications for work visas. Additionally, applicants for employment with Gulf Island must be currently authorized to work in the United States on a full-time basis. Accordingly, Gulf Island will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Gulf island is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Gulf Island employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Gulf Island. No recruiting placement fee will be paid in the event Gulf Island hires the candidate due to the referral or through other means.

We are seeking skilled Pipe Welders for a barge repair project in Channelview, TX. The ideal candidates will have experience in welding pipes for marine or industrial applications, with strong attention to safety and quality. Responsibilities: Perform pipe welding for barge repairs following project specifications Read and interpret blueprints, schematics, and welding procedures Ensure welds meet quality and safety standards Operate welding equipment safely and efficiently Requirements: Proven experience in pipe welding (marine/barge experience preferred) Proficient in SMAW, GTAW, and/or FCAW processes Ability to pass pre-employment weld tests and drug screening Strong commitment to safety protocols How to Apply: Contact us at: 713-291-4598 | 956-382-2631 | 281-965-2749 Or apply in person at: 815 Sheila Lane, Channelview, TX Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Welder Helper Performs duties assigned by the supervisor and/or lead man including but not limited to grinding; sanding; and stocking weld work stations, completing part fabrication and fit up for welders and maintaining a clean work environment. The employee holding this job must perform the work activities in a correct, accurate and timely fashion. Marginal job functions: Replace or assist other workers as needed Perform other tasks as assigned by supervisor Knowledge, skills and abilities: Individual must posses knowledge, skills, and abilities or be able to demonstrate that the individual can perform the essential functions of the job, with or without reasonable accommodations, using some combinations of skills and abilities. Minimum knowledge, skills, and abilities for this position are: Ability to carry out not only simple but complex oral and written instructions and deal with problems from standardized situations and work experience. Ability to communicate well with supervisors, lead-man, and other co-workers. Ability to read blue prints and or drawings. Lifting, carrying, pushing, pulling and/or moving of 75 pounds and over, with frequent lifting and/or carrying odd shaped objects weighing up to 75 pounds, and up to 50 pounds of force constantly to move objects. Ability to comprehend additional training in relation to the performing of the work duties. Physical demands: Most of the work tasks (90 %) are performed in-door and subjected to environmental and weather condition changes. Hours: 8 to 10 hours per day. Week: 40 to 50 hours per week, sometimes more. Lunch: Half hour. Sitting: 25% of the time in an awkward position - not in the normal sitting position, such as sitting on a chair. Stands: 75% of the time. Environment: Exposed to dust, heat, humidity, fumes, cold and dampness when working outside. Shop is not air-conditioned. Physical task: Must climb and work at heights over 5 feet. Must climb ladders Must push and pull heavy weights while performing job duties. Must walk around the department and plant area to perform daily work. Stress: May work extended hours to meet work demands. Requires high degree of concentration May work continuously several hours without a break. May work in small areas. Must stand on hard surfaces to perform work task. Must perform work in awkward positions-vertical, horizontal, and overhead positions. May work quickly and have pressure of deadlines and production demands. Must stay focused on the work at hand while performing safely. Other Ergonomics Requirements: The position of Welder helper is a physically demanding job. The functions performed ordinarily involve: extending hands and arms in all directions, holding, grasping, pressing, turning objects using hands, picking, lifting, pinching, or otherwise working with fingers. Other Specifications and Requirements: Employee must observe and comply with all Safety policy and procedures. Demonstrates safe, productive job performance. Meets the company standards. Qualifications Standards: Must have experience in a welding shop environment Performance Standards: The criteria for evaluation in this position include, but are not limited to, the following: Ability to perform work according to routine, while maintaining standards of performance. Proper operation of equipment. Job Posted by ApplicantPro

All Tex is hiring experience welders!! Duties & Responsibilities: Demonstrated skills using MIG and TIG welding processes. Welding components in flat, vertical, or overhead positions. Adhere to safety procedures and process. Examining work pieces for defects and measure work pieces with straightedges templates to ensure conformance with specifications. Welding separately or in combination, using aluminum, stainless steel and Steel Carbon. Receives instructions, prints, and work orders for the job. Plans details of working procedure and tools and material requirements. Fabricates equipment by cutting, burning, and welding various metals. Cleans and prepares surfaces to be welded. Sets up, assembles, and tacks weld parts. Builds up worn or defective surfaces. Uses burning equipment to dismantle assemblies and to cut material to size and shape. Perform related duties as assigned. Skills & Requirements: GED or High School diploma required, certificate from a technical or vocational school is preferred. Understand and apply welding techniques and ability to operate welding equipment with skill Steel/Aluminum experience is preferred Fabrications with welding and layout Candidates are given a written & hands on weld test prior to position being offered. The welding to be performed at the Customers facility for repairs to Fuel Haulers or also referred to as Rolling 18-Wheeler Tanks. Candidates should have tools and equipment.