Welder fitter jobs in Hammond, IN

Title: A-Welder Reports to: Foreman Employment Status: Full Time Hourly (Non-Exempt) Pay Rate: Up to 52.45 (depending on qualifications and assessment) About us: Manhattan Mechanical Services provides highly skilled, merit shop craftsmen, ensuring the highest quality and safest mechanical services to light and heavy industrial facilities. Our merit shop philosophy ensures efficiency at every step of the project - from engineering/planning through startup. We are committed to a progressive career path for employees, complete with certifiable skills training. Manhattan Mechanical Services is a unique services provider that supports our customers in multiple areas: industrial maintenance services, process piping, structural steel, equipment installation, scaffolding and insulation. We specialize in providing turnkey projects to our customers. ***TO BECOME AN A OR B WELDER, CANDIDATES MUST PASS AN ASSESSMENT IN BOTH STICK AND TIG WELD*** Primary Function: The A-Welder will be certified in a combination of SMAW & GTAW welding and perform these processes in both shop and field environments. The A-Welder will be expected to work closely with their team and Manhattan Mechanical Services QA/QC Department to ensure all work is completed with the highest degree of quality. Manhattan Mechanical Services is a merit shop contractor supporting a team working environment. As such, all employees will be required from time to time to perform other duties that they are qualified to perform, outside of this job description and their normal work function. Work Environment: The normal work environment for this position will be in an industrial facility, which has been determined to be a safety sensitive environment. You will experience exposure to outdoor weather conditions and wear proper PPE is required for a variety of potential hazards. Every employee's performance could result in a significant incident affecting the health or safety of other employees, customers, customer's employees, the public, property or the environment. Roles & Responsibilities: The roles and responsibilities of an A-Welder may include, but are not limited to, the following: The A Welder is responsible for producing x-ray quality welds according to site standards and specifications. Safe use of hand and power tools. Responsible for identifying potential hazards and mitigating the hazards. Familiar with pipe cutting and beveling operations Read and understand WPS/WPQ documents. Must be willing to work as a team at all times to support the project. Fully participate in health, safety, quality and environmental processes. Experience: Three - Five years of experience in pipe welding, and able to pass SMAW & GTAW welding processes. Skills Required: Must have the following three certifications: Capable of performing X-ray quality welds on carbon steel with SMAW 6010 and 7018 electrodes in all positions including structural steel and pipe. Capable of performing X-ray quality welds on carbon steel and stainless steel with GTAW E70S2 or E70S6 electrodes in all positions including structural steel and pipe. Must be NCCER certified in related trade (knowledge verified and performance verified). Fabricating threaded pipe, socket weld pipe and butt weld pipe. Able to read and understand piping isometric drawings, weld maps, blueprints, and P&ID's. Able to install piping and piping components. Able to build and install various types of pipe hangers and supports. Able to cut and or bevel piping using oxyfuel, plasma, mechanical equipment. Knowledge of Rigging and Rigging operations Able to perform Hydrostatic Testing Education and requirements: Must be willing to attend continued training applicable to job as deemed necessary by Manhattan Mechanical Services. Must be able to pass an NCCER Assessment and be Performance Verified. Must be able to pass and receive TWIC card verification Physical: Must comply with Manhattan Mechanical Services 's drug and alcohol policy. Able to pass physical examination, pre-employment if necessary, as required by Manhattan Mechanical Services. Must be able to climb ladders and stairways. Must be able to carry 50 lbs. of tools and/or materials. Must be able to work at elevated heights as well as in confined spaces. (towers, vessels, excavations, etc.) Must be able to work extended hours on your feet on uneven surfaces. (dirt, concrete, asphalt, mud, gravel, etc.) Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required. Safety/Environmental: Must be able to pass applicable site-specific training. Must be able to read and understand safety instructions, signs, labels and permits in English. Manhattan Mechanical Services is an Equal Opportunity Employer, and relies on the diverse skills, backgrounds and perspectives of our people to drive change, innovation and growth. EOE/M/F/D/V

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

As an S&C Electric team member, you'll work on projects that have real-world impact. You'll help transform the grid for resilient and reliable power worldwide. S&C has more than a 100-year history of innovation and has been 100% employee-owned since 2012. We continue this legacy as a trusted, forward-thinking leader in the electrical industry. You will advance a safer, more reliable, and more resilient electrical grid. Our products help the grid adapt to severe weather and transition to clean energy. We're big enough to be a respected industry leader but small enough for you to impact our company directly. Our commitment gives you opportunities to impact on and off the job positively. Join S&C to make an impact on tomorrow's energy challenges and become an employee-owner! Hours 4:00 pm- 2:30 am (Monday- Friday) Occasional OT on Saturdays 10-15 hours of overtime during the week as needed Compensation At S&C, we are dedicated to providing competitive and equitable compensation for all our team members, with a commitment to transparency in our pay practices. The estimated hourly base pay rate for this position is $28 per hour. This role is also eligible for S&C's annual short-term incentive bonus, subject to eligibility criteria. Join Our Team as a Welder! Are you passionate about Welding? S&C Electric Company is seeking a dynamic individual to coordinate our welding function. As a welder, you'll be crucial in ensuring smooth operations and supporting our diverse team. The Welder-Intermediate is responsible for performing various welding tasks to assemble metal structures and parts. The role involves using manual or semi-automatic welding equipment to fuse metal segments. This position requires adherence to safety protocols, precision in execution, and the ability to work collaboratively within a team environment to ensure the production of high-quality welded products. Key Responsibilities: Execute moderately complex welding operations to join, fabricate, and repair metal and other weldable material such as stainless steel. Set up and operate manual and semi-automatic (robotic) welding equipment including MIG and TIG welding, including turntable MIG. Read and interpret moderately complex blueprints, diagrams, specifications, and job orders to determine appropriate welding processes. Ensure welding is completed to the required standards and specifications. Inspect welded surfaces and structures to identify defects and ensure conformity with specifications. Deburr pieces to create appropriate welding services when necessary. Move materials, parts, equipment and other items using material handling equipment (ie. Lifts, hoists, hand trucks. etc) ensuring safety practices are diligently followed. Robotic Welders: Operate and program robotic welding equipment. Set up robotic welding systems for production runs. Monitor robotic welding operations and make necessary adjustments to ensure quality. Troubleshoot and resolve issues with robotic welding equipment. Maintain welding equipment in good working condition. Work collaboratively with team members and other departments to achieve production goals. Record and report production data accurately and timely. Participate in and identify continuous improvement initiatives to enhance welding processes. Meet department targets and consistently adhere to quality and safety standards. Understand and comply with all applicable Company policies and rules. Maintain regular and punctual attendance. Attend in-person or virtual meetings as requested or required. Communicate effectively and respectfully with others. Understand and comply with all applicable Company policies and rules. Other responsibilities as assigned. Required High School diploma. What you'll Need To Succeed: 3-4 years of demonstrated experience in a welding role in a manufacturing, automotive, or related environment. Sound understanding of welding techniques, metallurgy, and welding symbols. Knowledge of safety standards related to welding and metalworking. Ability to pass a welding skills test. Sound understanding of the properties and characteristics of metals used in welding. Understanding of welding equipment maintenance and troubleshooting. Robotic Welders: Understanding of robotic welding systems and programming. Knowledge of robotic welding setup and maintenance. Familiarity with robotic welding software and troubleshooting techniques. Ability to perform MIG, stick, and flux-cored arc welding techniques. Proficient in reading and interpreting moderately complex blueprints, drawings, and specifications. Good attention to detail to ensure precision in welding tasks. Excellent hand-eye coordination and manual dexterity. Ability to set up, operate, and maintain welding equipment and tools. Well-rounded problem-solving skills to identify and resolve welding-related issues. Effective communication skills to collaborate with team members and supervisors. Ability to work independently and as part of a team. Physical demands: Standing: Continuously required to stand and perform tasks Lifting & Carrying: Infrequently required to solo or team lift and/or carry items, exercising sound judgment to employ manual handling or machine lifts where required, and risk assessments, if appropriate Walking: Infrequently required to walk moderate distances Pushing: Occasional pushing of motorized material handling carts with loaded weights up to 1000 lbs. Low Posture: Infrequently required to perform tasks using a low posture, including but not limited to stooping, bending, crawling, crouching, kneeling, or squatting Position Self/ Move: Infrequently required to position self to perform tasks involving but not limited to reaching, twisting, rotating, and pushing/pulling Manual dexterity: Infrequently required to use hand-eye coordination to control both hands and arms for a full range of motion to operate equipment/machinery/power tools/office productivity equipment Ascending/ descending: Infrequently ascending or descending ladders/stairs/scaffolding/ramps/poles Observation/ Eyesight: Infrequently required to observe details at close range including depth perception, peripheral vision, and the ability to differentiate between colors S&C Electric is committed to equal-opportunity employment. All employees and applicants will be considered without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. If you are an individual with a disability and need an accommodation to complete the application, please email us at *******************. No fixed Deadline

Welder/Fabricator Are you a Welder who is looking for a good work culture and a company that cares for your well-being? SMS is the place for you. What we do: SMS group is an industrial equipment manufacturer for the steel industry. We design, build, and service equipment and sleep plants across the globe with a strong technical services/machine shop network in North America. Summary The right candidate will: · Perform welding operations such as arc, MIG, TIG brazing and burning in all positions on a variety of metals. · Operate drill press to make parts for fabrication. · Record measurements, record pertinent information as required. · Weld per SMAW, GMAW, GTAW standards; vertical up, vertical down, and horizontal · Plasma arc cutting · Air carbon arc cutting · Pipe bending, fitting, welding, and threading · Use horizontal and vertical saws, torch, and cut off wheel · Set up and operate all welding machines, be able to do basic troubleshooting · Set up and operate all machines in the fabrication area, be able to do basic troubleshooting What you'll need: · Must have GED or High school Diplomas · Basic knowledge of mechanical applications · Follow instructions and established procedures. · Read and interpret prints, including welding prints What we offer: · Competitive compensation · Medical/Dental/Vision coverage starting after 30 days · Paid vacation · 10 paid holidays · 401K with a company match · Paid lunches · Paid uniforms, internal metatarsal boots and all other PPE · Training · Tuition reimbursement program and more! Who we are: At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test. **************** LinkedIn

Chase Technical Staffing is hiring MIG Welders for full time positions with a Metal Industrial and Furniture parts fabrication company in Aurora, IL. Apply today to join a friendly team that believes in developing all levels of talent and offers avenues for growth! MIG Welder Highlights:Selecting, measuring, cutting, and joining metals to specs. Monitor parts to meet specifications Ability to interpret Blueprints and schematics Cleaning and inspecting welding equipment & tools MIG Welder Requirements: Minimum 1 years MIG Welding experience required (TIG Welding a plus!) Metal parts fabrication experience preferred Verbal and Written communication skills Day Shift (6:00 am-2:30 pm) and Evening Shift (4:00 pm-12:00 am) $18.00 - $25.00/hour to start with opportunities for Performance Pay Increases Primary Duties and Responsibilities Selecting, measuring, cutting, and joining appropriate metals to specifications. Preparing metals and work surfaces to ensure safe and effective assemblage.Interpreting specifications and blueprints accurately.Regularly cleaning and inspecting welding equipment and tools. Determining correct gas ratios.Testing the strength of each join during and after project completion. Diagnosing issues and troubleshooting as required. Liaising with the line manager or supervisor, reporting any issues, and making suggestions for improvement. Work under instruction of Supervisor or Department Assistant Comply with all health and safety procedures Other duties as assigned by Supervisor or Lead Qualifications Minimum of 1-2 years' MIG welding experience required (TIG welding experience a plus) High school diploma or GED equivalent Machine Setup experience, a plus Knowledge of manual and mechanical welding techniques Ability to read and understand blueprints preferred Excellent stamina, strength and dexterity Ability to remain calm under pressure Verbal and written communication in English.Sound understanding of welding safety Basic math skills As required, ability to perform repetitive bending, kneeling, and lift cumbersome and or heavy objects (up to 50 lbs).Willingness to learn and work overtime when required. Pre-Employment Screening: Drug screen and background check required. Chase Technical Staffing is an Equal Opportunity / Affirmative Action employer: All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, disability, sex, age, ethnic or national origin, marital status, sexual orientation, gender identity or presentation, pregnancy, genetics, veteran status or any other status protected by state or federal law

$32.36-$42.78. Please note that the pay range information is a general guideline only. The pay offered to a selected candidate will be determined based on factors such the scope and responsibilities of the position, qualifications of the selected candidate, business considerations, internal equity, and external market pay for comparable jobs. This position is not available for relocation assistance, sponsorship assistance and referral bonus program. About the Role: Fermilab's Machine Shop Department is seeking a full-time Instrument Welder to join the team. Under general supervision, provides full range of assigned welding services in all laboratory environments What your day-to-day as an Instrument Welder at Fermilab will look like: Operates all types of welding equipment including MIG, TIG, conventional electric, conventional gas apparatus or programmable welding devices. Applies equipment to welding a variety of metals such as iron, steel, stainless steel and aluminum. Sets up and uses appropriate equipment to provide a timely, cost effective and high quality service. Maintains required certifications to ensure competence in such areas as the welding of vacuum or pressure vessels/lines. Performs other duties as assigned by supervisor. Abides by and is responsible for performing all duties in accordance with all environmental, health and safety regulations and practices pertinent to this position. Skills and Attributes for Success: High School diploma (or technical certificate or equivalent) along with 5 years of job shop experience or trade school. Applicable Knowledge, Skills and Abilities Required: • Knowledge of manual welding techniques along with knowledge of multiple welding apparatus. Work Arrangement: Please note that the described work arrangement is subject to change based on business needs and is not guaranteed to be final. Onsite: This is an onsite role, and the candidate must be able to work from our Batavia Office. Benefits/Perks: Fermilab offers a competitive and comprehensive benefits program, including: Medical, Dental, Vision and Flexible Spending Accounts Paid time off Life insurance Short and Long-term disability insurance Retirement benefits Onsite day care Why Fermilab: Fermilab is America's premier laboratory for particle physics and accelerator research, funded by the U.S. Department of Energy. We support discovery science experiments in Illinois and locations around the world, including deep underground mines in South Dakota and Canada, mountaintops in Arizona and Chile, CERN in Europe and the South Pole. Drug-Free Workplace & Pre-Employment Screening Fermilab is dedicated to fostering a safe, productive, and drug-free work environment. As part of the hiring process, candidates must successfully complete a background check and drug screening. Employment is contingent upon the successful completion of these screenings. Equal Opportunity Statement Fermilab is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. REAL-ID Requirement for access to Fermilab Campus Fermilab requires all members of the public to produce a REAL-ID, or equivalent, to access the Fermilab Campus for interviews or career events. A list of acceptable forms of ID can be found here: ******************************************************************************* If a candidate is selected for an interview but does not possess any of the equivalent documents, we may schedule a virtual interview. What To Expect Next: We'll be in touch! If your qualifications are in alignment with the position requirements, one of our recruiters will be reaching out to schedule a phone interview to learn more about your career interests and goals. In the meantime, we encourage you to check us out on Facebook, X, Instagram, LinkedIn, or our About Us page.

Rovanco Piping Systems, a leading manufacturer of pre-insulated piping systems, has an immediate need for a non-union GMAW Welder. Perform duties to fabricate plastic and metal reservoirs utilizing various welding machines and equipment. Work from blueprints, shop orders and instructions. Set up angles and temperatures on plastic welder. Operate hand welding torch to fabricate and attach metal couplings and covers. Set up head, speeds and gas pressure on seam welder. Replace tips and cones on welding equipment as needed. Requirements Certified per ASME Section 9 a plus! Ability to produce X-ray quality welds using GMAW, SMAW, and SAW process is vital Required to pass a 1G, 5G and 6G pipe test Job Type: Salary: Work Location: One location Benefits offered: Paid time off Health insurance Dental insurance Healthcare spending or reimbursement accounts such as HSAs or FSAs Other types of insurance Retirement benefits or accounts

I. BASIC FUNCTION The Welder is responsible for performing all aspects of welding on inland marine vessels and equipment, including maintenance, fabrication, and structural repairs. This position plays a critical role in ensuring the structural integrity and operational readiness of barges and boats while maintaining a strong focus on safety, quality, and compliance. By executing high-quality repairs and fabrications, the Welder supports vessel reliability, minimizes downtime, and contributes directly to the safety, efficiency, and longevity of marine operations. II. MAJOR RESPONSIBILITIES 1. Performing all aspects of welding work including prepare/check equipment. 2. Welding steel barges and ships. 3. Stick welding - 6010, 7018 and 7024. 4. Flux core welding in all positions using 0.52 wire. 5. Safely operate heavy equipment and follow all safety policies and procedures. 6. Staying compliant with all regulatory bodies as it applies to the work that is being completed and with all safety rules and policies. 7. This position may involve travel to multiple locations. Other 1. Perform other duties as required and directed by management. 2. Carry out the Business Philosophy, Code of Conduct, Mission and Vision of Illinois Marine Towing and Canal Barge Company. III. TRAITS AND ATTRIBUTES A. Communication Skills: Effectively communicates with team members, supervisors, and support staff to ensure project clarity, task coordination, and safety. Demonstrates active listening and the ability to give and receive constructive feedback. B. Attention to Detail: Executes welds and repairs with precision, ensuring structural integrity and adherence to specifications and codes. C. Safety Oriented: Proactively follows all safety procedures and helps foster a culture of safety in all work environments. IV. ORGANIZATIONAL RELATIONSHIP The Welder is appointed by and reports to the Shipyard Services Manager. V. EXPERIENCE/EDUCATION 1. High School Diploma or equivalent is required. 2. Hold a valid Driver's License. 3. Minimum 2 years of experience in stick welding. 4. ABS certification is preferred but not required. 5. Strong understanding and application of workplace safety practices. 6. Have strong written, verbal, and interpersonal skills. 7. Possess a Transportation Worker Identification Credential (TWIC). VI. PHYSICAL REQUIREMENTS 1. Ability to climb ladders and stairs. 2. Repetitive bending and stooping, squatting, and kneeling. 3. Lifting heavy marine equipment and lifting objects from various levels up to 75 pounds. 4. Ability to work outdoors in weather such as rain, snow, and extremely hot and cold temperatures. 5. Since the use of a respirator mask is required, welders must be clean shaven at all times to ensure an effective face seal. VII. OUTCOMES The Welder is expected to produce high-quality, structurally sound welds that meet safety and regulatory standards critical to the integrity of marine vessels and equipment. Work must be completed efficiently, with minimal rework or delays, while maintaining a strong focus on safety and compliance. The welder should demonstrate reliability, adaptability to changing priorities, and a commitment to supporting team goals. Consistent adherence to safety protocols, timely completion of assigned tasks, and professional conduct across all job sites are key measures of success in this role. EEO/AA/M/F/Vet/Disability Employer Illinois Marine Towing is a federally regulated company. Any applicant tentatively selected for this position will be subject to pre-employment drug and alcohol screening. Persons occupying this role will be subject to random drug and/or alcohol testing. Canal Barge Company and its subsidiaries are Equal Opportunity Employers - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information.

MIG Welder/ Fabricator Full time - M-F Overtime available The National Joist Company is hiring full time experienced MIG welders. Come and join a dedicated team at a growing company! Job Description: At The National Joist Company we fabricate steel joist and deck building systems. We are looking for individuals who are passionate in their line of work and are dedicated to helping bring our visions to life. Qualifications: Minimum 2yrs experience in MIG Welding Self- motivated and detail- oriented Material handling with sit-down forklifts & overhead cranes Be familiar with the steel industry Be proficient at MIG/TIG welding working in thickness Must have fabrication skills Ability to read a tape measure Ability to read and understand blueprints, work orders and instructions Certified welder is a plus

Overview Perform diversified jobs relating to the welding of various parts, assemblies, balers, etc. involved in the manufacturing of the product line. Responsibilities Qualifications Ability to set up and operate welding machines Ability to mig weld in horizontal, vertical, and overhead positions Read blueprint drawings and parts list to determine proper machine fabrication Safely utilize all tools and equipment Attention to accuracy and detail Communicate with supervisor regarding safety and quality issues Physical Requirements Heavy industrial environment with mechanical activities requiring personal protective equipment. While performing the duties of this job, the employee is regularly required to: Stand for extended periods of time Sit, Stoop, Bend Reach above shoulders Lift 50 pounds Benefits Health, Dental, and Vision Insurance Life Insurance 401(k) & Company Match Vacation Holidays Pay Rate & Schedule Pay rate is based on experience and skill level Full-time Monday - Friday Qualifications Pre-employment Requirements Background check Drug Screening Physical Pre-employment Requirements Background check Drug Screening Physical Qualifications Ability to set up and operate welding machines Ability to mig weld in horizontal, vertical, and overhead positions Read blueprint drawings and parts list to determine proper machine fabrication Safely utilize all tools and equipment Attention to accuracy and detail Communicate with supervisor regarding safety and quality issues Physical Requirements Heavy industrial environment with mechanical activities requiring personal protective equipment. While performing the duties of this job, the employee is regularly required to: Stand for extended periods of time Sit, Stoop, Bend Reach above shoulders Lift 50 pounds Benefits Health, Dental, and Vision Insurance Life Insurance 401(k) & Company Match Vacation Holidays Pay Rate & Schedule Pay rate is based on experience and skill level Full-time Monday - Friday

FLSA Status: Non-Exempt Reports To: Production Supervisor Location: North Aurora, IL Job Summary: The Welder is responsible for performing skilled welding work in the fabrication, maintenance, and repair of metal structures and equipment. This role involves interpreting blueprints, using welding equipment, and ensuring the quality and safety of welded products. Key Responsibilities: Welding & Fabrication: Perform welding tasks using various welding techniques such as MIG, TIG, and arc welding. Fabricate and repair metal structures, equipment, and parts according to specifications. Interpret blueprints, diagrams, and work orders to determine welding requirements. Quality Control: Inspect completed welds to ensure they meet quality standards and specifications. Perform necessary adjustments and repairs to achieve desired results. Maintain accurate records of work performed and materials used. Safety & Maintenance: Follow all safety protocols and procedures to ensure a safe working environment. Maintain and clean welding equipment and tools. Report any equipment malfunctions or safety hazards to the supervisor. Collaboration & Communication: Work closely with other team members to complete projects on time. Communicate effectively with supervisors and colleagues regarding project status and any issues. Participate in team meetings and training sessions as required. Qualifications: High school diploma or equivalent. Certification in welding or completion of a welding training program. Minimum of 2 years of welding experience. Proficiency in various welding techniques and equipment. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and commitment to quality. Good communication and teamwork skills. EEO Statement: the company is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

FLSA Status: Non-Exempt Reports To: Production Supervisor Location: North Aurora, IL Job Summary: The Welder is responsible for performing skilled welding work in the fabrication, maintenance, and repair of metal structures and equipment. This role involves interpreting blueprints, using welding equipment, and ensuring the quality and safety of welded products. Key Responsibilities: Welding & Fabrication: Perform welding tasks using various welding techniques such as MIG, TIG, and arc welding. Fabricate and repair metal structures, equipment, and parts according to specifications. Interpret blueprints, diagrams, and work orders to determine welding requirements. Quality Control: Inspect completed welds to ensure they meet quality standards and specifications. Perform necessary adjustments and repairs to achieve desired results. Maintain accurate records of work performed and materials used. Safety & Maintenance: Follow all safety protocols and procedures to ensure a safe working environment. Maintain and clean welding equipment and tools. Report any equipment malfunctions or safety hazards to the supervisor. Collaboration & Communication: Work closely with other team members to complete projects on time. Communicate effectively with supervisors and colleagues regarding project status and any issues. Participate in team meetings and training sessions as required. Qualifications: High school diploma or equivalent. Certification in welding or completion of a welding training program. Minimum of 2 years of welding experience. Proficiency in various welding techniques and equipment. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and commitment to quality. Good communication and teamwork skills. EEO Statement: the company is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

FLSA Status: Non-Exempt Reports To: Production Supervisor Location: North Aurora, IL Job Summary: The Welder is responsible for performing skilled welding work in the fabrication, maintenance, and repair of metal structures and equipment. This role involves interpreting blueprints, using welding equipment, and ensuring the quality and safety of welded products. Key Responsibilities: Welding & Fabrication: Perform welding tasks using various welding techniques such as MIG, TIG, and arc welding. Fabricate and repair metal structures, equipment, and parts according to specifications. Interpret blueprints, diagrams, and work orders to determine welding requirements. Quality Control: Inspect completed welds to ensure they meet quality standards and specifications. Perform necessary adjustments and repairs to achieve desired results. Maintain accurate records of work performed and materials used. Safety & Maintenance: Follow all safety protocols and procedures to ensure a safe working environment. Maintain and clean welding equipment and tools. Report any equipment malfunctions or safety hazards to the supervisor. Collaboration & Communication: Work closely with other team members to complete projects on time. Communicate effectively with supervisors and colleagues regarding project status and any issues. Participate in team meetings and training sessions as required. Qualifications: High school diploma or equivalent. Certification in welding or completion of a welding training program. Minimum of 2 years of welding experience. Proficiency in various welding techniques and equipment. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and commitment to quality. Good communication and teamwork skills. EEO Statement: the company is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

FLSA Status: Non-Exempt Reports To: Production Supervisor Location: North Aurora, IL Job Summary: The Welder is responsible for performing skilled welding work in the fabrication, maintenance, and repair of metal structures and equipment. This role involves interpreting blueprints, using welding equipment, and ensuring the quality and safety of welded products. Key Responsibilities: Welding & Fabrication: Perform welding tasks using various welding techniques such as MIG, TIG, and arc welding. Fabricate and repair metal structures, equipment, and parts according to specifications. Interpret blueprints, diagrams, and work orders to determine welding requirements. Quality Control: Inspect completed welds to ensure they meet quality standards and specifications. Perform necessary adjustments and repairs to achieve desired results. Maintain accurate records of work performed and materials used. Safety & Maintenance: Follow all safety protocols and procedures to ensure a safe working environment. Maintain and clean welding equipment and tools. Report any equipment malfunctions or safety hazards to the supervisor. Collaboration & Communication: Work closely with other team members to complete projects on time. Communicate effectively with supervisors and colleagues regarding project status and any issues. Participate in team meetings and training sessions as required. Qualifications: High school diploma or equivalent. Certification in welding or completion of a welding training program. Minimum of 2 years of welding experience. Proficiency in various welding techniques and equipment. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and commitment to quality. Good communication and teamwork skills. EEO Statement: the company is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Immediate Opening: 1st Shift Welder (Overtime Available!) We are currently seeking a skilled Welder for a premier local manufacturer. This is a fast-paced role for someone who prefers an early start and is looking to maximize their paycheck with consistent overtime. Position Highlights: Pay Rate: $18.00-$19.00/hr. Schedule: 1st Shift (5 AM Start) Opportunity: Plenty of OT for those looking to earn more. Responsibilities: Blueprint Literacy: Read drawings and measurements to plan layouts and welding procedures. Precision Setup: Set up components, align parts using calipers/rulers, and utilize grinders for prep work. Quality Welding: Operate manual or semi-automatic equipment in various positions to weld and repair components. Inspection: Test and inspect welded surfaces to ensure structural integrity and identify flaws. Safety First: Maintain equipment and a clean workspace to ensure a safe environment for all. Not the job for you? Who do you know? We love referrals, and your friends will love you too! #ZR

Title: A-Welder Reports to: Foreman Employment Status: Full Time Hourly (Non-Exempt) Pay Rate: Up to 52.45 (depending on qualifications and assessment) About us: Manhattan Mechanical Services provides highly skilled, merit shop craftsmen, ensuring the highest quality and safest mechanical services to light and heavy industrial facilities. Our merit shop philosophy ensures efficiency at every step of the project - from engineering/planning through startup. We are committed to a progressive career path for employees, complete with certifiable skills training. Manhattan Mechanical Services is a unique services provider that supports our customers in multiple areas: industrial maintenance services, process piping, structural steel, equipment installation, scaffolding and insulation. We specialize in providing turnkey projects to our customers. ***TO BECOME AN A OR B WELDER, CANDIDATES MUST PASS AN ASSESSMENT IN BOTH STICK AND TIG WELD*** Primary Function: The A-Welder will be certified in a combination of SMAW & GTAW welding and perform these processes in both shop and field environments. The A-Welder will be expected to work closely with their team and Manhattan Mechanical Services QA/QC Department to ensure all work is completed with the highest degree of quality. Manhattan Mechanical Services is a merit shop contractor supporting a team working environment. As such, all employees will be required from time to time to perform other duties that they are qualified to perform, outside of this job description and their normal work function. Work Environment: The normal work environment for this position will be in an industrial facility, which has been determined to be a safety sensitive environment. You will experience exposure to outdoor weather conditions and wear proper PPE is required for a variety of potential hazards. Every employee's performance could result in a significant incident affecting the health or safety of other employees, customers, customer's employees, the public, property or the environment. Roles & Responsibilities: The roles and responsibilities of an A-Welder may include, but are not limited to, the following: The A Welder is responsible for producing x-ray quality welds according to site standards and specifications. Safe use of hand and power tools. Responsible for identifying potential hazards and mitigating the hazards. Familiar with pipe cutting and beveling operations Read and understand WPS/WPQ documents. Must be willing to work as a team at all times to support the project. Fully participate in health, safety, quality and environmental processes. Experience: Three - Five years of experience in pipe welding, and able to pass SMAW & GTAW welding processes. Skills Required: Must have the following three certifications: Capable of performing X-ray quality welds on carbon steel with SMAW 6010 and 7018 electrodes in all positions including structural steel and pipe. Capable of performing X-ray quality welds on carbon steel and stainless steel with GTAW E70S2 or E70S6 electrodes in all positions including structural steel and pipe. Must be NCCER certified in related trade (knowledge verified and performance verified). Fabricating threaded pipe, socket weld pipe and butt weld pipe. Able to read and understand piping isometric drawings, weld maps, blueprints, and P&ID's. Able to install piping and piping components. Able to build and install various types of pipe hangers and supports. Able to cut and or bevel piping using oxyfuel, plasma, mechanical equipment. Knowledge of Rigging and Rigging operations Able to perform Hydrostatic Testing Education and requirements: Must be willing to attend continued training applicable to job as deemed necessary by Manhattan Mechanical Services. Must be able to pass an NCCER Assessment and be Performance Verified. Must be able to pass and receive TWIC card verification Physical: Must comply with Manhattan Mechanical Services 's drug and alcohol policy. Able to pass physical examination, pre-employment if necessary, as required by Manhattan Mechanical Services. Must be able to climb ladders and stairways. Must be able to carry 50 lbs. of tools and/or materials. Must be able to work at elevated heights as well as in confined spaces. (towers, vessels, excavations, etc.) Must be able to work extended hours on your feet on uneven surfaces. (dirt, concrete, asphalt, mud, gravel, etc.) Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required. Safety/Environmental: Must be able to pass applicable site-specific training. Must be able to read and understand safety instructions, signs, labels and permits in English. Manhattan Mechanical Services is an Equal Opportunity Employer, and relies on the diverse skills, backgrounds and perspectives of our people to drive change, innovation and growth. EOE/M/F/D/V Powered by JazzHR IksQyd0Wnj

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions. Heat oxygen/propane heating torch. Perform grinding and pick up work as needed. Complete air carbon arc gouging. Properly use fillet and butt gauges. Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material. Requirements Minimum 8 years of naval/commercial welding experience. Successfully pass several tests over a three-week period. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Title: TIG Welder Pay Rate: $24.00 - $26.00/hour Schedule: Monday - Friday: 6:00 A.M. - 2:30 P.M. (Overtime often until 4:30 P.M.) Saturday: 6:00 A.M. - 12:00 P.M. (Mandatory if needed, depending on workload) Position Overview We are seeking experienced TIG Welders to join our team and contribute to the fabrication and manufacturing of high-quality metal parts. The ideal candidate will be able to step in with minimal training, follow blueprints with precision, and produce strong, clean welds that meet exact specifications. Key Responsibilities Fabricate and manufacture metal parts in accordance with blueprints and specifications. Follow blueprints and welding symbols to ensure accuracy and quality. Perform TIG welding and operate metal fabrication tools. Produce strong, clean welds that meet quality and tolerance standards. Grind, finish, and inspect completed welds for strength and accuracy. Test welded output to ensure it meets required specifications. Maintain a safe and organized work area. Follow all safety policies and procedures. Requirements & Qualifications Proven TIG welding experience (2+ years preferred), ideally in a manufacturing environment. Strong blueprint reading skills and knowledge of welding symbols-must be able to work independently without additional training. Proficiency in TIG welding, grinding, finishing metals, and general metal fabrication. Ability to stand, crouch, and lift heavy equipment as needed. Detail-oriented with a commitment to quality workmanship. Must pass a weld test, drug test, and background check prior to hire. Benefits Competitive hourly pay based on experience. Full-time hours with overtime opportunities. Opportunity to work with a skilled, professional team. Pre-Employment Screening: Drug screen and background check required. Chase Technical Staffing is an Equal Opportunity / Affirmative Action employer: All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, disability, sex, age, ethnic or national origin, marital status, sexual orientation, gender identity or presentation, pregnancy, genetics, veteran status or any other status protected by state or federal law

FLSA Status: Non-Exempt Reports To: Production Supervisor The Welder is responsible for performing skilled welding work in the fabrication, maintenance, and repair of metal structures and equipment. This role involves interpreting blueprints, using welding equipment, and ensuring the quality and safety of welded products. Key Responsibilities: Welding & Fabrication: Perform welding tasks using various welding techniques such as MIG, TIG, and arc welding. Fabricate and repair metal structures, equipment, and parts according to specifications. Interpret blueprints, diagrams, and work orders to determine welding requirements. Quality Control: Inspect completed welds to ensure they meet quality standards and specifications. Perform necessary adjustments and repairs to achieve desired results. Maintain accurate records of work performed and materials used. Safety & Maintenance: Follow all safety protocols and procedures to ensure a safe working environment. Maintain and clean welding equipment and tools. Report any equipment malfunctions or safety hazards to the supervisor. Collaboration & Communication: Work closely with other team members to complete projects on time. Communicate effectively with supervisors and colleagues regarding project status and any issues. Participate in team meetings and training sessions as required. Qualifications: High school diploma or equivalent. Certification in welding or completion of a welding training program. Minimum of 2 years of welding experience. Proficiency in various welding techniques and equipment. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and commitment to quality. Good communication and teamwork skills. EEO Statement: the company is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.