Welder fitter jobs in La Mesa, CA

Full-time Description The general purpose of this position is to weld simple to complex components and/or structures while meeting all safety, quality, and schedule requirements. Responsible for various types of weld preparation, welding, and weld finishing operations to accomplish welding in accordance with customer drawings and specifications. Requirements Proficient in assigned aluminum welding techniques, including weld fillets, gusset toe and wraps, frame wraps and termination Demonstrated ability to weld into corners / vertical intersections with minimal blending Ability to evaluate and correct basic weld pick up, with minimal supervision Basic knowledge in assigned welding techniques Basic knowledge of wire and filler material applications for various steel alloys and aluminum Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) Working in compliance with all safety, quality, environmental and health requirements. Job Requirements Must be able to pass eye test and workmanship qualification test. Must be tested and fit for respirator use. Willing to work any shift and overtime as required. Education and/or Experience High school diploma required. Minimum of 2 years of proven experience in a welding trade is required. Shipyard experience is preferred, but not required. Knowledge, Skills, and Abilities Ability to take direction and follow instructions Good mechanical aptitude with ability to produce consistent quality Ability to inspect and correct basic weld pick-up without supervision Ability to work independently and as part of a team Problem-solving and trouble-shooting skills Excellent hand-eye coordination; good spatial orientation Ability to consistently meet production deadlines Ability to use conventional and precision measuring instruments Ability to pass a skills evaluation test to demonstrate welding ability Ability to weld in uncomfortable positions where applicable Ability to work on beams, scaffolding, ladders and confined spaces. Ability and willingness to work with and to teach less-skilled workers Ability to maintain and perform routine preventive maintenance on welding equipment Physical Requirements: Frequent standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Physical ability to lift, push, pull and carry 50+ lbs., bend, stoop and climb scaffold and work on elevated work surfaces, beams, ladders, and confined spaces. While performing the duties of this job the employee is regularly required to use hands and fingers to handle, feel, talk, or hear. The vision requirements include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Works in all areas of the shipyard and on-board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. The noise level in the work environment can vary and is often loud. Salary Description $25 - $38 Hourly - DOE

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job. Salary Range: $27.04 To $50.27 Hourly OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has multiple positions open for Welder Journeyman, with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation Job Summary / Welder Journeyman: Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. Additional Qualifications/Responsibilities Job Requirements and Experience: Must be 18 years of age or older to apply. Minimum 5 years of marine and/or shipyard experience preferred. Benefits: Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) Paid Time Off Company paid holidays Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) Career development opportunities

Amentum is looking for a qualified Aerospace Structural Welder to support our San Diego, California location. The Aerospace Structural Welder will perform standard cutting and welding operations to include by not limited to repair work and new fabrication activities based in carbon steel, aluminum, stainless steel, and galvanized pipe, plate, structural shapes, etc. Repair products by dismantling, straightening, reshaping, and reassembling parts using cutting torch, straightening press, and hand tools. Some metal working experience preferred such as the operation of a metal shear, brake, pipe bending, and various cutting tools. The incumbent may also design, weld, heat-treat, fabricate, and machine precision tools, components, and assemblies for related Ground Support Equipment (SE). The incumbent may advise about metal machining, welding and designs, manufactures, or modifies special precision tools, gauges, dies, and fixtures to facilitate welding or other shops supported. Perform all other position related duties as assigned or requested. **Work Environment, Physical Demands, and Mental Demands:** While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or fee; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, crawl or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job includes close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and various weather conditions. The employee is regularly exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; and outside weather conditions on occasion. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues. Position may require travel. **Other Responsibilities:** **Safety** - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. **Quality** - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. **Procedure Compliance** - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job. **Minimum Requirements** + Must be a U.S. Citizen. + Must be able to speak, read, write and understand English. + Must have a valid Driver's License. + Must be a High School graduate or equivalent. + May be required to pass a U.S. Government background security check. + Must be able to meet and maintain all base access and contract security requirements. + Position may require the ability to pass and maintain a Security/SCI Security Clearance. + Pre-employment drug screening is required. + Ability to stand for a prolong period of time performing repetitive tasks. + Ability to work independently with minimal to no supervision. + 4 years' recent experience and proficiency in the following weld processes': + GTAW-Aluminum, Stainless Steel, Mild Steel / 1-6G/F + GMAW- Steel- 1-6G/F + SMAW- Steel / 1-6G/F + Oxyfuel brazing + Will perform various field level and limited sustainment maintenance actions on various Ground Support Equipment. + Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks & job qualification(s). + Must be able to lift up to 50 pounds. + Ability to read, understand and interpret blueprints, technical drawings, shop drawings and schematics.. **Preferred Qualifications:** + Strong problem-solving skills. + Strong verbal communication skills. + Basic knowledge of maintenance repairs on a variety of equipment. + Knowledge of Continuous Process Improvement. + Time management and prioritization skills. + Knowledge of Analog Machinery i.e., lathe, drill press, milling machine. + GTAW, SMAW, Brazing & GMAW- currently certified. Please submit Resume and applicable qualifications when applying. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. **Salary and Other Compensation:** The hourly rate for this position is $44.12 per hour. Plus $7.50 per hour, up to 40 hours per week, for Health & Welfare. **Benefits:** The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan, life insurance, long-term disability insurance, short-term disability insurance, 5.54 hours of paid time off biweekly, and 11 paid holidays annually. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Responsive recruiter Benefits: 401(k) 401(k) matching Opportunity for advancement Training & development Support other personnel as required, including (but not limited to): cutting, grinding, cleaning, tacking, etc. Lifting 50lb. General power tool knowledge (angle grinders, drills, band saw, cold saw). Welding (MIG 0.035, Flux Core, Dual Shield 0.045). Loading and unloading trucks. Basic knowledge on how to read a measuring tape. 8-hour shift Monday to Friday. Material stock check (shipping & receiving). Steel profiles & processes knowledge. Forklift certification preferred. Operating overhead crane & rigging. Handles paperwork accurately and acquires all signatures per process. Education Minimum education requirement: High School diploma or equivalent. Must have a basic understanding of standard power tools and possess the ability to read / follow simple instructions. Lift heavy objects up to 50 pounds. Work in confined spaces Experience in structural steel environment (preferred). Depending on experience, you earn $20.00 - $22.00/hour. Compensation: $20.00 - $22.00 per hour About Us PCIW Steel Corp is a top quality structural steel company with local people working on projects throughout California. Our employees bring a true passion to the job. A passion that drives the company. It makes us reach higher and be a better source for our customers. With more than 54 years of combined experience in the industry and hundreds of projects under our belt delivering structural steel that include decking, joists, stairs, and other miscellaneous metals. Using our highly skilled team you will receive outstanding workmanship and unparalleled service dedicated to every project's success and safety. We commit to provide excellence and value to all that we do. Our dedicated approach delivers exceptional quality, predictable outcomes, continuous growth, opportunities, and mutually beneficial relationships. We have built our reputation on providing quality service through trust and relationships, while offering all aspects of steel services to fit a diversity of project types and needs. OUR MISSION We are a highly experienced, relationship-driven company that values strong work ethic honoring commitments and providing a high quality product at a competitive price. Satisfied customers are our top priority. “Do it right the first time”. OUR VISION To become your best choice in a steel construction company. We aim to go above and beyond to satisfy our clients. At PCIW Steel we are family.

Job DescriptionBenefits: 401(k) 401(k) matching Opportunity for advancement Training & development Support other personnel as required, including (but not limited to): cutting, grinding, cleaning, tacking, etc. Lifting 50lb. General power tool knowledge (angle grinders, drills, band saw, cold saw). Welding (MIG 0.035, Flux Core, Dual Shield 0.045). Loading and unloading trucks. Basic knowledge on how to read a measuring tape. 8-hour shift Monday to Friday. Material stock check (shipping & receiving). Steel profiles & processes knowledge. Forklift certification preferred. Operating overhead crane & rigging. Handles paperwork accurately and acquires all signatures per process. Education Minimum education requirement: High School diploma or equivalent. Must have a basic understanding of standard power tools and possess the ability to read / follow simple instructions. Lift heavy objects up to 50 pounds. Work in confined spaces Experience in structural steel environment (preferred). Depending on experience, you earn $20.00 - $22.00/hour.

Job DescriptionLabor One is hiring Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 (619)657-5507 or (858)717-1672 *Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards Three years experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must pass shipyards plate test in all positions and pipe test on 6G restricted fix position using FCAW and GTAW processes. Must be certified to operate high reaching equipment. Must have ability to work at heights, in confined spaces, and be available to work any shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks - Set up tools, welding equipment and supplies at job site - Burns pipe or penetrations. - Tacks and welds pipe. - Cleans weld area; sweeps and removes scrap. - Other job duties as may be assigned relevant to the trade. Materials, Tools Equipment, Work Aids Welding leads, welding machinery, ventilation hose, tool bag, ladder, grinders, mini grid, burning leads, cutting torches, chipping hammers, welding stingers, and personal protective equipment. Physical/Mental Involvement Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

CTR Group is seeking several Pipe Welder's local to the San Diego, CA area. Immediate openings and urgently hiring! What We Offer: Weekly Pay - you receive a paycheck every week Comprehensive Benefits Package Safety First! RESPONSIBILITIES: (may include but are not limited to) Read and interpret basic drawings and weld symbols Pass weld test for all Company weld procedures in the 6GR position Pass Company TIG weld test procedure for Carbon Steel, SS and CUNI pipe Work to Company housekeeping procedure Inspection of work, identification of potential problems, initiation of corrective actions Increase awareness of Quality procedures within department Perform as a productive working team member that meets daily goals set by the supervisor Continuously improve communications and flexibility within the team Help build the team environment Build pride of workmanship and quality through on job training Contribute towards innovation / productivity improvements Assist in the control of waste elimination, e.g. materials, consumables etc Assist supervisor to maintain control of department equipment and its maintenance Must have full set of personal tools Work towards the team goal of delivering the vessel on time Always be ready to start shift on time Follow Company guidelines and procedures Do not leave job early or return late from break times Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage REQUIREMENTS: (may include but are not limited to) Must be able to TIG Carbon, Stainless steel, and Copper Nickle Pipe Ability to pass “A Class” skills validation test to demonstrate welding ability for restricted open root welds Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel, carbon steel and stainless steel to meet contract requirements for A Class welding on the vessel Must have the ability to bend, squat, stoop, crawl, and kneel Perform prolonged standing Ability to turn head from side to side and about the vertical axis Lift/push/pull 50lbs on an occasional basis Lift/push/pull up to 20lbs on a frequent basis Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps) Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts Able to work at a variety of levels (ex. waist, eye, overhead) Demonstrate the ability to safely and appropriately use required tools and equipment Demonstrate good balance while working on uneven surfaces and maneuvering obstacles Possess sufficient handgrip and coordination to carry and operate tools and equipment Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards Ability to withstand cold and hot temperatures Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time within OSHA guidelines Able to respond to verbal and audible sounds/commands Able to utilize adequate visual skills Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Must be able to tour all vessels and work sites While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear The employee is occasionally required to sit Candidates must meet the following employment eligibility guidelines to be considered for employment: 18 years of age or older at time of application Able to provide proof of US Person Status Willing to submit to a drug screen Willing to submit to a background check Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

Job Description TIG Welder HOW TO APPLY - Go to **************************** and, fill out the application form on the bottom of the page. Basile Studio is seeking a skilled TIG welder to join our furniture design and fabrication shop located in East Village, San Diego. We create custom furniture and interiors for restaurants, hotels, and high end residential. This is a unique opportunity to work directly with designers and engineers especially early on in the design process. Main Duties Read and interpret shop drawings and specifications ensure material compatibility with project requirements utilize tig welding techniques to create precise and aesthetically pleasing welds apply finishing techniques (grinding, polishing, etc) Work with designers, engineers, and fabrication manager to understand and problem solve new projects. Attend model review and kick off meetings with Engineers. Create solutions that could help a project item be more successful and eliminate waste. Full buy off on project assembly to assure there is no rework and fitting within budget. Identify early on if the estimated allocated time is in danger of not being met. Provide solutions to improve efficiency. Ensure all projects are built off verified field dimensions. Layout Projects: Collect all and ship check all parts and components purchased. Create a fabrication succession list that is coordinated with other departments. Coordinate with tool manager for consumables and tools needed. Analyze and discuss (if needed) the process requirements for fabrication, loading, shipping, and installing project items in parts and/or whole. Determine what equipment/tools are required for on-site installation. Determine power requirements for special equipment Coordinate with support team members or anyone else that is involved in the success of your project. Assure parts from other departments match your plans and dimensions. Delegate and check in regularly with support team members, if provided, to ensure they are performing tasks correctly. Daily operations may also involve: Cleaning the shop Assembling components Product protection at completion Load, pick up, and deliver materials and finished product. Installation on site (local and non-local) REQUIREMENTS: 3 plus years of proven professional working experience in a welding position commitment to safety protocols and guidelines in a workshop environment Valid Driver's license required BENEFITS: Full time Holiday pay health, dental, and 401k $24-35 per hour based on experience HOW TO APPLY - Go to **************************** and, fill out the application form on the bottom of the page.

Company: Standard Inspection Services Level of Experience: Any Level Reports to: Foreman Summary/Objective: Pipe Welders II join pipes. valves and fitting components as specified by layout, prints, diagrams, work orders, or verbal instructions, using hand and powered hand tools, and welding equipment. They must be familiar with OSHA requirements for safety and hot work onboard naval vessels. Duties include, but are not limited to: Successfully completion pipe welding qualification requirements using Shielded Metal Arc Welding (SMAW) and Gas Tungsten Arc Welding (GTAW) in the restricted 6G position on ferrous and nonferrous materials. Setup and adjust various welding equipment and associated accessories. Ability to interpret welding symbols-based on the AWS Welding Symbols. Familiarity with the workmanship requirements of the following: MIL-STD-22, Welded Joint Design, S9074-AR-GIB-010_278, Requirements for Fabrication Welding and Inspection, and Casting Inspection and Repair for Machinery, Piping, and Pressure Vessels MIL-STD-1689A, Fabrication, Welding, and Inspection of Ships Structure. Ability to visually inspect fillet using a fillet weld gauge and butt or groove welds for acceptance. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education / Experience Required: Must be 18 years old. High School Diploma or equivalent. Completed a structured welding program. Must have a valid California driver's license. Must possess basic skills (reading, writing and mathematical skills). Preferred: A plus, previous experience in a ship repair environment. Understand the Naval Ship Repair requirements and working environment. Ability to work with minimum supervision. Position Type/Expected Hours of Work: This is a full-time position requires 40+ hours of work per week. M-F 0600 - 1430 (or as otherwise assigned by Project Manager) with pre-scheduled overtime as needed. Work Environment: This job operates in a shipyard work environment. Travel: This position does require ability to travel. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be available to work at heights, confined spaces and have ability to climb staircases and ladders of varying sizes. May involve carrying objects that weigh up to 50 lbs., frequent stooping, bending, crawling, reaching, and walking. Work Authorization/Security Clearance (if applicable) Eligibility to work in the US. Obtaining DBIDS level security clearance. OSHA 10 Maritime Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement Standard Inspection Services is an Equal Opportunity Employer: minority/female/disability/veteran/sexual orientation, encouraging diversity in the workplace and a drug-free workplace. Completion of a satisfactory background check. Must pass a drug test and physical examination.

As a Structural Welder at Talent Source, you will play a crucial role in fabricating and welding structural components for marine vessels within the shipyard environment. Below are the key responsibilities and requirements for this position: Responsibilities: Read and interpret engineering drawings, blueprints, and technical specifications to determine welding requirements and procedures. Set up welding equipment, including MIG, TIG, and stick welding machines, and select appropriate welding techniques and parameters based on material type, thickness, and joint configuration. Fabricate and weld structural components, such as hulls, bulkheads, decks, and superstructures, using various welding processes to achieve quality welds and structural integrity. Perform weld inspections and quality control checks to ensure welds meet specified standards and tolerances, including visual inspection and non-destructive testing methods. Operate cutting equipment, such as plasma torches, oxy-fuel torches, and saws, to prepare materials for welding and fabrication. Follow safety procedures and guidelines to prevent accidents and injuries during welding operations, including proper use of personal protective equipment (PPE) and adherence to safety regulations. Maintain cleanliness and organization of work areas, tools, and equipment to ensure a safe and efficient working environment. Collaborate with engineers, designers, and other tradespeople to support integrated shipyard operations and achieve project objectives. Requirements: Previous experience as a structural welder or welder in a shipyard or maritime environment. Proficiency in welding techniques and processes, including MIG, TIG, and stick welding, and ability to weld various materials, such as steel, aluminum, and stainless steel. Knowledge of welding codes and standards, such as AWS D1.1, ABS, and NAVSEA standards. Strong attention to detail and quality standards in welding and fabrication processes. Excellent communication and teamwork skills, with the ability to collaborate effectively with colleagues and stakeholders. Physical ability to lift and maneuver heavy materials and work in various positions, including standing, kneeling, and bending. Certification or training in welding or structural fabrication preferred but not required. If you are a skilled and experienced structural welder looking for an opportunity to work in a dynamic shipyard environment, we encourage you to apply for the Structural Welder position at Talent Source. Join our team and play a vital role in fabricating and welding structural components for marine vessels. Apply now and be part of our commitment to excellence in maritime operations!

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has multiple positions open for Welder Journeyman , with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation Job Summary / Welder Journeyman: Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. Job Requirements and Experience: Must be 18 years of age or older to apply. Minimum 5 years of marine and/or shipyard experience preferred. Benefits : Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) Paid Time Off Company paid holidays Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) Career development opportunities This position may require access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport. Welder Journeyman EEO/AA/Vet/Disabled #zr

Job DescriptionOUR CORE PILLARS: Safety | Operational Excellence | Shareholder ValuePropulsion Controls Engineering has multiple positions open for Welder Journeyman, with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation Job Summary / Welder Journeyman: Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. Job Requirements and Experience: Must be 18 years of age or older to apply. Minimum 5 years of marine and/or shipyard experience preferred. Benefits: Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) Paid Time Off Company paid holidays Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) Career development opportunities This position may require access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport. Welder Journeyman EEO/AA/Vet/Disabled #zr

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR enn RGX4KXh

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Amentum is looking for a qualified Aerospace Structural Welder to support our San Diego, California location. Job Summary: The Aerospace Structural Welder will perform standard cutting and welding operations to include by not limited to repair work and new fabrication activities based in carbon steel, aluminum, stainless steel, and galvanized pipe, plate, structural shapes, etc. Repair products by dismantling, straightening, reshaping, and reassembling parts using cutting torch, straightening press, and hand tools. Some metal working experience preferred such as the operation of a metal shear, brake, pipe bending, and various cutting tools. The incumbent may also design, weld, heat-treat, fabricate, and machine precision tools, components, and assemblies for related Ground Support Equipment (SE). The incumbent may advise about metal machining, welding and designs, manufactures, or modifies special precision tools, gauges, dies, and fixtures to facilitate welding or other shops supported. Perform all other position related duties as assigned or requested. Work Environment, Physical Demands, and Mental Demands: While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or fee; and talk or hear. The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, climb or balance, crawl or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job includes close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and various weather conditions. The employee is regularly exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; and outside weather conditions on occasion. The noise level in the work environment is usually loud, or may include unsafe conditions, questioning nonstandard operations or environmental factors that may involve unmitigated hazards, and providing feedback to supervisors and managers on all safety issues. Position may require travel. Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job. Minimum Requirements * Must be a U.S. Citizen. * Must be able to speak, read, write and understand English. * Must have a valid Driver's License. * Must be a High School graduate or equivalent. * May be required to pass a U.S. Government background security check. * Must be able to meet and maintain all base access and contract security requirements. * Position may require the ability to pass and maintain a Security/SCI Security Clearance. * Pre-employment drug screening is required. * Ability to stand for a prolong period of time performing repetitive tasks. * Ability to work independently with minimal to no supervision. * 4 years' recent experience and proficiency in the following weld processes': * GTAW-Aluminum, Stainless Steel, Mild Steel / 1-6G/F * GMAW- Steel- 1-6G/F * SMAW- Steel / 1-6G/F * Oxyfuel brazing * Will perform various field level and limited sustainment maintenance actions on various Ground Support Equipment. * Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks & job qualification(s). * Must be able to lift up to 50 pounds. * Ability to read, understand and interpret blueprints, technical drawings, shop drawings and schematics.. Preferred Qualifications: * Strong problem-solving skills. * Strong verbal communication skills. * Basic knowledge of maintenance repairs on a variety of equipment. * Knowledge of Continuous Process Improvement. * Time management and prioritization skills. * Knowledge of Analog Machinery i.e., lathe, drill press, milling machine. * GTAW, SMAW, Brazing & GMAW- currently certified. Please submit Resume and applicable qualifications when applying. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Salary and Other Compensation: The hourly rate for this position is $44.12 per hour. Plus $7.50 per hour, up to 40 hours per week, for Health & Welfare. Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan, life insurance, long-term disability insurance, short-term disability insurance, 5.54 hours of paid time off biweekly, and 11 paid holidays annually. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Job DescriptionLabor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard. $160 perdiem, if eligible. Job Requirements: Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Pipe Welding Assessment: FCAW Fillet weld plates: · 2F 3F 4F (VT test) *Fillet testing shall take 1-2 hours Steel backing butt joint 6X6 3/8” thick: · 2G 3G 4G (VT and UT test ) *All Butt joint testing takes a welder an average of 1-2 days Butt joint with ceramic backing 12X8 ¾” thick: · 1G 2G 3G (VT and UT test) *All Butt joint testing takes a welder an average of 1-2 days Simulation: · Wraps 2F 3F 36” in length · Diagonal 3F 4F 36” in length · In and out corners 2F 4F 6” · Water tight collar · Air arc fillet welds (VT testing) *All simulation testing takes average welder 1-2 days GTAW Pipe welding assessment · 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test) · 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test) · 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test) *All pipe testing takes average welder 1-2 days Send resume to nena.diaz@laboronetx.com

Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 *Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: -This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. -The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE: 1. Must be able to comprehend instructions, drawings, and general correspondence. 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention. 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action. 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory. 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint: 1. SMAW 2. GTAW 3. FCAW OR 4. Silver Brazing 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals. 8. Must possess a working knowledge of equipment and work processes used in marine pipe welding. 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work. 10. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems. 11. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES: 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks. 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor. 3. Work shifts and overtime as assigned. 4. Be accountable for completion of daily work assignments. 5. Comply with OSHA standards and the shipyards best safety practices. 6. Keep your work area clean and safe at all times, especially at the end of the shift. 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary. 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT: -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day). 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day). 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps). 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles. 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day). 9. Respond to visual, verbal, and audible sounds/commands. 10. Work at heights above 12' from ladders, scaffolding, and manlifts. 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.