Welder fitter jobs in Lakeland, FL - 49 jobs

Job DescriptionSalary: $16 - 25 Hourly GMF Steel Group is excited to hire highly motivated and hard-working individuals to weld, burn cope, and punch as needed. Applicants should thrive in a fast-paced environment and be excited to work in an energizing and innovative workspace. Whether you are experienced in working with steel or not, we are happy to provide you with growth opportunities to fine-tune your skills and explore your passions. We will train as needed and give you a career that grows with you! If you are experienced in fitting, we have opportunities starting at an increased pay rate available, as well. GMF wants our employees to be as excited to be a part of our rapidly growing company as we are, so we offer a merit incentive for all welders. Pay rates include $180/Month as incentive for the first 90 days, and after 90 days, you will be eligible for our standard production incentive. Candidates must demonstrate a strong commitment to safety and willingness to strive for GMFs high company standards. Salary Range: $16 - $25/Hour Dependent upon experience Eligible for a Performance Bonus Hours: Monday through Friday: 7:00AM - 4:30 PM Saturdays: 6:00AM-12:00PM Schedule adjusted according to workload; Occasional to constant according to schedule. Requirements: Ability to pass all pre-employment screening including weld tests Physical endurance to complete the necessary tasks Benefits/Perks: Health, Vision, Dental, Life Insurance, and a 401k Match Program Paid Time Off About GMF Steel Group: GMF Steel Group is an Inc 5000 company and one of the fastest growing Steel firms in the Southeastern US. GMF Steel Group is headquartered in Lakeland, Florida with offices in Tampa, Panama City, and Concord, NC. GMF Steel Group is in Lakeland, Florida and produces over 20,000 tons of Structural Steel annually with the latest BIM fabrication technology. GMF Steel Group services the Southeastern US and Gulf Coast with over 250 employees across 4 offices. GMF Steel Group core sectors of the Structural Steel market include Amusement Parks, Stadiums, Arenas, Offices, Education, Healthcare, Hospitality, Retail, Light and Heavy Industrial projects. GMF incorporates the latest technology through Building Information Modeling (BIM) to integrate all facets of Steel Construction and 4-D modeling. GMF Steel Group is an AISC Certified Fabricator and Erector. GMF Steel Group takes pride in recruiting and developing the best talent through education of the latest technology and best practices.

Wastequip Steel Division has an immediate opportunity for a Welder to support our Lakeland, FL manufacturing operation. The ideal candidate will be a MIG Welder with prior experience in a manufacturing environment. Pay Rate: $20.04 Responsibilities Positions parts in jigs or fixtures on bench or floor, or clamps parts together along layout marks Lays out, positions, and tack welds work pieces Welds along vertical, horizontal, and overhead weld lines Connects regulator valves to oxygen and fuel gas cylinders for cutting torch. Turns regulator valves to activate flow of gases, lights torch, and adjusts gas mixture and pressure to obtain desired flame. Holds & guides torch at proper angle to cut metal Examines weld for bead size and other specifications Scarfs or grooves welds and parts Chips or grinds off excess weld, slag, or splatter Other duties as assigned Employee must regularly stand, walk, reach, stoop, lift, climb or balance, kneel, crouch, or crawl Employee must regularly lift and/or move up to 25 lbs., frequently lift and/or move up to 50 lbs., and occasionally lift and/or move 90 lbs. Specific vision abilities required include distance vision, close vision, peripheral vision, & depth perception Qualifications High school diploma or GED One to six months of related experience and/or training preferred Ability to read and comprehend simple instructions, short correspondence, and memos Knowledge of basic math, tape measure reading, fractions & decimals Ability to understands and carry out detailed but uninvolved written or oral instructions Ability to read blue prints and measuring tape Experienced in a fast paced production environment preferred Able to pass all EHS required tests and clearances Company Benefits: • 2 Medical Plan Options - Base HSA (High Deductible) and Buy-Up Medical Plans • Prescription (Rx) Insurance • Health Savings Account (HSA) • 2 Dental Plan Options - Base Dental and Buy-Up Dental Plans • Vision Insurance • Flexible Spending Accounts (FSA's) • Health Care FSA • Dependent Care FSA • Company Paid Base Life Insurance • Company Paid Accident, Death & Dismemberment Insurance • Company Paid Business Travel Accident Insurance • Company Paid Disability Insurance ▪ Short-Term Disability (STD) and Base Long-Term Disability (LTD) Insurance • Employee Assistance Program (EAP) • Voluntary Hospital, Accident & Critical Illness (Cancer) Insurance • 401(K) Retirement Plan with 50% Company Match • Voluntary Pet Insurance • Vacation and Personal/Sick Time • Paid Grandparent Leave • Paid Bonding Leave • Adoption Assistance • Education Assistance (Tuition Reimbursement) About Wastequip Wastequip got its start in 1989 with containers and compactors. But, today, we have evolved into so much more than just a manufacturer of high-quality steel containers and compactors. We are the waste industry's only All-in-One solutions provider - from carts and containers to collect waste to hoists and trash trucks to move the waste to parts, service and technology to keep your operation running smoothly. While we're proud to be North America's leading manufacturer of waste handling equipment, we are equally proud to be a driving force for enhanced sustainability across the waste industry. We are consistently striving to improve our own operations while making it easier for our customers to do the right thing - building a brighter future for all.

We are seeking highly skilled Journeyman Welders, Boilermakers, Millwrights, Pipe Fitters, and Iron Workers to join our team. If you are an experienced professional in one of these trades, we want to hear from you! Join a company that values craftsmanship and expertise. Key Responsibilities: 1. Journeyman Welder Perform structural and pipe welding using MIG, TIG, and stick welding techniques. Read and interpret blueprints, schematics, and weld symbols. Ensure all welding complies with company and industry safety standards. Conduct routine inspections and repairs of welded structures. Requirements: Minimum of 4 years of experience in welding. Strong understanding of safety procedures and regulations. 2. Journeyman Boilermaker Assemble, install, and repair boilers, tanks, and other large vessels. Use welding and bolting techniques to fabricate boiler components. Work at various heights and in confined spaces. Requirements: Proven experience as a Boilermaker. Knowledge of boiler codes and standards (ASME). Ability to read blueprints and technical drawings. Must be physically capable of heavy lifting and working in challenging environments. 3. Journeyman Millwright Install, maintain, and repair industrial machinery and mechanical equipment. Align machines and equipment using precision tools and instruments. Troubleshoot mechanical failures and perform preventive maintenance. Requirements: Minimum 4 years of millwright experience. Strong mechanical aptitude and problem-solving skills. Ability to read schematics, manuals, and mechanical drawings. Familiarity with machine shop tools and industrial equipment. 4. Journeyman Pipe Fitter Assemble, install, and maintain piping systems, steam, and industrial piping. Interpret blueprints, plans, and specifications for pipe layouts. Cut, bend, and thread pipes using various hand and power tools. Requirements: Journeyman Pipe Fitter certification. At least 4 years of experience in pipe fitting. Ability to work with different materials such as copper, steel, and plastic. Familiarity with pressure testing and welding techniques for pipe systems. 5. Journeyman Iron Worker Fabricate and install steel structures and framework for buildings, bridges, and other structures. Perform rigging and signal crane operators for material placement. Ensure all ironwork is completed to code and meets safety standards. Read blueprints and layouts to assemble iron and steel components. Requirements: Minimum of 4 years of experience in ironwork. Ability to work at heights and use heavy lifting equipment. Strong understanding of construction safety and OSHA regulations. Knowledge Skills & Abilities: Ability to work independently or as part of a team. Excellent problem-solving and troubleshooting skills. Strong attention to detail and quality craftsmanship. Must have reliable transportation. Ability to work long, flexible hours and overtime as needed. Work Location and Travel: The main office is located at 2730 Mine and Mill Road, Lakeland, FL. Travel to client and customer sites is required. Days and hours of work may vary at times to include some evenings and weekends. Work Environment: This is a full-time position. Days and hours of work vary (Monday to Sunday with some overnight work) and overtime is frequently required. This position is safety sensitive in nature, which means employees perform duties so fraught with risks of injury to self or others, or environmental injury, that even a momentary lapse of concentration or attention can have disastrous consequences. The working environment is often in harsh elements (hot/humid and/or cold temperatures, rain, etc.) Industrial environments often have exposure to hazardous chemicals, moving heavy equipment, and other safety-sensitive hazards/risks. Must always be alert and able to safely perform the essential duties of the job without risking harm to oneself or others. Mid-State maintains a firm commitment in providing a safe and healthy work environment for its employees and quality services to its clients. Mid-State is a drug-free workplace. Must be able to pass a post-offer / pre-placement drug screen and job-related employment physicals. Must also submit to a post-offer / pre-employment background check that verifies criminal history. Physical Requirements: Talk/Hear: The ability to listen to and understand information and ideas presented through spoken words and sentences. Stand/Sit: The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting or standing. Walk: Frequently walking through job sites. Use hands/fingers to handle or feel: Frequently use hands and arms in handling, installing, positioning, moving materials, and manipulating things. Able to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position. Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects. Able to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects. Stoop, kneel, crouch, climb, or crawl: Frequently climbing, lifting, balancing, stooping, and handling materials. See: Able to read and understand information and ideas presented in writing. Carry, weight, Lift: The ability to exert maximum muscle force to lift, push, pull, or carry objects up to (frequently - 25 pounds; routinely - 50 pounds). Must be legally authorized to work in the United States. Mid-State participates in E-Verify. Go to ****************************** to learn more.

We are currently seeking an experienced Certified D1.1 Structural Welder/Fabricator for an immediate opportunity at our Lakeland location. Qualified candidates will have a minimum of 2 years of experience inlays out, fitting, and welds fabricated, cast, and forging components to assemble structural forms. Essential Duties and Responsibilities Select equipment and plan layout, assemble, and weld. Layout, position, align and fit components together. Bolt, clamp, and tack-weld parts to secure in position for welding. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Ensure a safe working environment by maintaining constant awareness of job-related hazards and effectively communicating instruction to others. Maintain weld leads, MIG guns, plasma cutters in proper working order. Weld-on outlets, flanges and assemble supports based on stock listings and miscellaneous fabrication sheets. Provide quality assurance by visually inspecting all welds. Redirect focus as needed to accommodate any emergency fabrication needed by Project Managers without compromising safety. Actively participate in daily safety meetings and attend additional training sessions as required. Ensure a safe working environment by maintaining constant awareness of job-related hazards and communication with others. Stock pipe and inspect for visible defects. Layout and cut pipe based on stock listings and miscellaneous fabrication sheets. Ensure proper placement of outlets and fittings based on stock listings. Grind off outlet openings to prepare for welders. Bundle both welded and threaded lines per stock listings. Actively participate in daily safety meetings and attend additional training sessions required. Education and/or Experience High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands & Work Environment While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit and climb or balance. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment includes exposure to weather and Fabrication Processes The noise level in the work environment is usually loud. GENERAL INFORMATION The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required of an incumbent; and management may modify, assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What can we offer you? MJW offers unsurpassed opportunities to build a successful future. We are an industrial construction, engineering, and fire protection firm with more than 45 years of experience. Our international reputation for completing projects on time and on budget is built on comprehensive in-house expertise that enables us to self-perform all aspects of a project and maintain complete control over the quality, cost, and schedule. Our goal is to deliver the most effective combination of cost and performance on every job, every day. As an employee-owned company, we take great pride in our commitment to safety and continuous employee training to successfully complete complex tasks in challenging industrial environments. The successful candidate will receive competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, ESOP, and 401k. Here, you can make an impact and make a difference. Come join us! We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law

About Us At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Overview The Welder will be welding Carbon Steel Pipe of all sizes. Responsibilities Welds together components of products specified by layout, blueprints, diagram, and work order, welding procedures or oral instructions. Sets controls on welding machine in conformance with WPS. May weld in flat, horizontal, vertical, or overhead positions as qualified. Must be able to read a tape measure. Tack assemblies together using approved WPS. Adheres to all company health, and safety policies. Work in a safe manner. Maintain a clean and organized workspace. Qualifications Required Education, Experience, and Qualifications Welds together components of products specified by layout, blueprints, diagram, and work order, welding procedures or oral instructions. Sets controls on welding machine in conformance with WPS. May weld in flat, horizontal, vertical, or overhead positions as qualified. Must be able to read a tape measure. Tack assemblies together using approved WPS. Adheres to all company health, and safety policies. Work in a safe manner. Maintain a clean and organized workspace. Must be qualified under AWS D1.1 code for Overhead (4G) and Vertical (3G) using SMAW Must pass welding test. Experience working with stainless and carbon steel. Experience working with overhead cranes. High school diploma or equivalent. Must be able to lift up to 50 lbs. Must be able to understand fractions, decimals, and degrees of a circle. General knowledge of structural members ( beams, channel, angle, pipe, and tubing Preferred Education, Experience, and Qualifications OSHA 10 or 30 hour preferred Travel Requirements 5-10% of time will be spent traveling to job site(s)/office location. Physical Activities Climbing stairs. Operating machinery and/or power tools Remaining in a stationary position, often standing or sitting for prolonged periods Environmental Conditions Noisy environment Physical Demands Medium work that includes adjusting and/or moving objects up to 50 pounds Pay Range USD $24.28 - USD $32.41 /Hr. ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

**Job Title: Fitter/Welder Helper** **Job Description** We are seeking a dedicated Fitter/Welder Helper to support our welding and fitting operations. The successful candidate will assist in setting up welding machines, preparing structural materials, and performing essential fabrication duties. **Responsibilities** + Assist Welder/Fitters with machine setup and material preparation. + Complete grinding, deburring, and general fabrication tasks. + Maintain cleanliness and organization in the work area. + Perform physical tasks such as bending, laying down, and lifting. + Operate torches, magnetic drills, grinders, and perform tack welding. **Essential Skills** + 6 months of experience in manufacturing or construction. + Knowledge of hand and power tools such as grinders and sanders. **Additional Skills & Qualifications** + Experience with welding, fabrication, or fitting is preferred but not required. **Why Work Here?** Enjoy a comprehensive benefits package including medical, dental, and vision coverage, along with stable working hours and competitive pay. Benefit from free short and long-term disability coverage, an employee assistance program, tuition reimbursement, and paid time off that grows over time. Participate in our Safety Stars program and enjoy celebration luncheons recognizing team achievements. **Work Environment** Work in an industrial fabrication shop, which can be hot, dirty, and dusty. The facility features 2-5 open fans and open-air conditions. The typical work shift is from 6 am to 4:30 pm, Monday through Friday, with occasional extended hours based on business needs. **Job Type & Location** This is a Contract to Hire position based out of Gibsonton, FL. **Pay and Benefits** The pay range for this position is $16.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Gibsonton,FL. **Application Deadline** This position is anticipated to close on Jan 30, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Labor One is hiring TIG Pipe Welders for a shipyard in Florida . Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 or (251)385-0491 *Please send us a text if we don't answer* POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Complete welds to the specified standards using appropriate equipment and materials. Install and verify operation of high-pressure steel pipes and fittings. Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipes and/ or similar tubular products. Test installed piping systems and install other related items in accordance with the applicable plans and specifications. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Troubleshoot equipment. Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. Work with minimal supervision. Perform other duties as assigned. REQUIREMENTS Education/ Experience: High school diploma or GED equivalence plus three to five years of pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of the safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/ adaptability, initiative, interpersonal skills, attention to detail, safety consciousness, and multitasking. Maintain the confidential integrity of details pertaining to shipyard. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstanding extreme heat and cold in an outside climate or confined space. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

PIPE WELDER ESSENTIAL FUNCTIONS: * Welding in and out of position on various pipe configurations using SMAW and FCAW welding processes. * Work closely with supervisors and pipe fitters to provide solutions to design deficiencies, system breakdowns, equipment malfunctions and other repair situations. * Tear down/repair/repack/reassemble valves in place. * Assess and repair reach-rods, deck actuators, valve handles, valve bodies and bonnets. * Repair sanitary systems aboard vessels. * Work with systems aboard vessels for fresh/potable water. * Work with engine cooling systems. * Repair or renew various other pieces of equipment as warranted. KNOWLEDGE, SKILLS AND ABILITIES: * Successfully pass a 6GR Pipe Welding Test using SMAW and FCAW. * Stainless Steel 6GR Pipe Welding Test will be SMAW. * Follows ABS / USCG pipe welding and fitting requirements * Assist in all types of valve, reach rod, heat exchanger or other miscellaneous mechanical work * Will work independently with minimal supervision * Conflict management, leadership, teambuilding and time management skills will be used * Attention to detail, organizational, problem solving, analytical, critical thinking and decision making skills will be used EDUCATION AND EXPERIENCE: * High School Diploma or Equivalent * Two (2) years of pipe welding experience * Must have tools; employer does not provide tools * Shipyard Experience is preferred WORK ENVIRONMENT: Outdoors. Work in confined spaces, in the elements, aboard shipyard vessels, in the shop, and travel outside the facilities to other local ports in the area via company truck. HOURS: 40+ hours per week. E-Verify and Drug-Free Workplace LOCAL CANDIDATES PREFERRED, as relocation expenses are NOT covered. Benefits * Two medical plans * Two dental plans * Vision plan * Short-term and long-term disability insurance plans * Company provided life insurance * Employee elected supplemental life insurance for employees and family * Employee Assistance Plan * Work-site Benefits * 401(K) plan with company match Gulf Marine Repair is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, and we consider all qualified individuals without regard to legally protected characteristics. Location: 33605

Manthey Hospitality is looking for a skilled Welder (steel &aluminum) to cut and weld metals at our fleet maintenance center and vessels. Job duties range from new vessel construction to repairs to existing vessels, barges, gangways, and structures. The right candidate must be competent in steel and aluminum welding. Must pass a welding test. This position is land/dock-based. Responsibilities Safety first; use all safety precautions when completing daily tasks including but not limited to personal protective equipment, eye, ear, breathing protection, harnesses, scaffolding, and ladders. Determine the appropriate welding equipment and settings. Set up components for welding according to specifications (e.g., cut material with powered saws to match measurements). Operate angle grinders and sanders. Align components using calipers, rulers, etc., and clamp pieces. Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead). Repair machinery and other components by welding pieces and filling gaps. Test and inspect welded surfaces and structures to discover flaws. Maintain equipment in a condition that does not compromise safety. General duties associated with ship repair and maintenance. Additional responsibilities as assigned. Requirements Qualifications Proven experience as a welder. Must pass welding test. Experience using a variety of welding equipment and procedures (TIG, MMA etc.). Experience in using electrical or manual tools (saws, squares, grinders, calipers, etc.). Knowledge of relative safety standards, PPE, and willingness to adhere to safety protocols and procedures. Excellent attention to detail, maintaining a clean and organized work area. Proficient in English. Successful completion of a relevant apprenticeship program is preferred. Professional Certification (e.g. an AWS welding certificate) will be a plus. Ability to read and interpret technical documents and drawings including blueprints. Take or read measurements to plan layout and procedures. Must have reliable transportation. Valid transportation Worker Identification Credential (TWIC Card) and/or ability to obtain and maintain. We are a drug-free workplace regulated by the United States Coast Guard. All employees must pass initial and ongoing random drug testing throughout employment. Experience Welding: 1 year (Preferred) Welding Certification (Preferred) Benefits 401(k) & Matching Health Insurance plus vision, dental, life, accident, disability, hospital, critical illness, identity, pet, legal, and more. Paid Time Off (PTO) Professional development assistance Subsidized Parking Complimentary passes and discounts to Manthey Hospitality brands M-F primary schedule, nights, weekends, and holidays as needed.

The County Materials Family of Companies manufactures and delivers concrete construction products to meet the demand for growing communities. We rely on our talented and dedicated team members to provide reliable products with personalized service. We are seeking a Welder Fabricator for County Materials in Astatula, Florida Job Summary: A Welder Fabricator reads blueprints, cuts/shapes metal, and joins parts using various welding techniques (MIG, TIG, Arc) to build structures or machinery, operating equipment like plasma cutters and cranes while adhering to strict quality and safety standards. Key duties involve material prep, component assembly, using hand/power tools, ensuring weld integrity, and maintaining work records, requiring physical stamina and technical skill with diverse metals. Job Duties: * Cut, bend, and assemble metal parts using blueprints, sketches, or verbal instructions * Apply MIG, TIG, Arc (SMAW), or Oxy-acetylene techniques to join components * Use plasma cutters, shears, ironworkers, drill presses, grinders, overhead cranes, and forklifts * Understand technical drawings, schematics, and welding symbols * Inspect finished welds for structural soundness and to meet specifications * Work with various metals (steel, stainless, copper) and lift heavy materials * Follow all safety protocols and procedures * Complete required paperwork, work orders, and quality checks Work Environment: * Indoor and outdoor work in varying weather conditions. * Exposure to moving machinery, electrical hazards, and noisy environments. Physical Requirements: * Frequent standing, walking, climbing, squatting, kneeling, and bending. * Lifting and carrying 10-40 lbs. pushing, pulling, and reaching overhead. Experience & Qualifications: * Demonstrated proficiency in multiple welding processes (MIG, TIG, Stick) * Minimum 2 years' experience in welding and steel fabrication * Ability to ready and interpret blueprints/technical drawings * Familiarity with fabrication tools and machinery * Knowledge of metal properties and welding safety * Physical strength, stamina, and good hand coordination for demanding tasks * Attention to detail and commitment to quality * AWS Certified Preferred

Job Description Essential Functions: Employee must be able to produce acceptable groove welds on code and non-code work in the flat, vertical and horizontal positions and produce acceptable fillet welds on code and non-code work in the flat, horizontal and vertical positions mainly utilizing the FCAW process. Employee must have at least 3 years' experience in, GMAW, FCAW and SMAW welding processes. Employee must be able to pass standard fillet break tests and bend tests on groove welds and to be trained and certify in multiple positions and processes including welding on fracture critical materials. Employee must be experienced in the use of grinders and other hand and power tools normally used in the welding industry. Job requires being able to work in an open-air environment during many types of weather conditions. This is a physically intensive job that many hours of standing along with stooping, bending, lifting and reaching. Employees are required to report to work able to perform their duties in a drug free state. Job requires a good level of hearing and vision for both the employee's safety as well as the safety of those working around the employee. Report to work on time and complete entire shift. Must exhibit safety values consistent with State and Federal rules and regulations as well as adherence to the companies' safety policies. Must maintain a clean and safe work area. Performs work as part of a team and must have an attitude that allows the employee to cohesively belong to the team effort. Must be able to listen attentively to supervision and follow direction accurately and timely. Must be able to learn from supervision, mentors and day to day work practices in a timely and accurate manner. Employees must develop to, and maintain, the companies' safety and quality standards. The position requires good accurate communication skills in both directions listening to supervision as well as communicating back to supervision. Powered by JazzHR VTvCqy1j1B

The Welder will be responsible for refurbishment of light and heavy-duty wreckers. Note: Must have welding tools/helmet and pass a weld test Responsible for all MIG maintenance and repairs on vehicles/trailers Repairing cracks, cross members and ramps Repairing broken attaching and mounting supports Maintain welding safety guidelines and regulations Organize and clean welding equipment Use measuring instruments such as micrometers and calipers to inspect angles, grooves or gap allowances Qualifications/Requirements High School Diploma or GED 2 Years of experience in MIG Welding with steel Welding Certifications are a plus Mechanical background and aptitude Automatic Electrical and Hydraulics experience Skilled with GMAW techniques Knowledge working with steel Attention to detail Physical Requirements Ability to withstand long hours of welding in rigorous and extreme conditions. Ability to operate various welding implements to achieve high quality welds The job requires lifting, crawling, pulling, constant use of hands, significant bending and reaching, climbing. significant physical strength and stamina. Ability to lift and pull at least 50 lbs. good hearing and vision are required.

Forgen is dedicated to building a better future - for generations. A Welder is responsible for assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape. Their duties include reviewing blueprints, cutting metal into the appropriate shape and smoothing molten metal to remove creases. Forgen Overview Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work. Key Responsibilities Analyze and diagnose equipment malfunctions. Prepare required documentation including work orders, parts lists, and timecards in an accurate and timely manner. Reading and understanding blueprints prior to starting a project. Sourcing the materials to be used in the project. Measuring and cutting materials to specifications. Welding materials using the correct materials to join the metals together. Checking finished work to make sure that it falls within the tolerances marked on the blueprints. Perform assigned tasks in a timely, accurate and efficient manner. Follow manufacturer and company service guidelines and procedures to ensure safe quality work and to preserve and document component failure information for accurate failure analysis. Maintain a safe working environment and observe all safety procedures, laws, policies, and rules. Math and Measurement Skills: Tape measure, Scale, Calipers, Fillet weld gauge. Communicate with equipment manager and field managers in a manner which promotes a positive relationship. Work overtime as needed and within labor law guidelines. Operate heavy power-driven equipment. Ability to obtain forklift and boom lift certification. Other duties as assigned by supervisor. Basic Qualifications High school diploma/GED or equivalent. Five (5) or more years of welding experience. Valid Driver's License and ability to drive on behalf of company business. Preferred Qualifications Preferred knowledge on the following topics: Operational characteristics of a variety of heavy, power-driven equipment. Maintenance requirements of heavy, power-driven equipment. Methods and materials used in general construction and maintenance work. Principles and techniques of field maintenance activities. Traffic laws, ordinances, and rules involved in heavy equipment operation. Occupational hazards and standard safety practices. Welding Machine set-up: Mig/Tig welding and hard facing of carbon; low alloy steels using solid and flux-cored wire; finishing of welds (chipping, grinding, sanding). Fabricating carbon, stainless and low alloy steels; Blueprint Reading and Weld Symbols (AWS and ISO); Weld joint prep; Hand plasma and oxy/fuel torches. The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary. 40 Hour HAZWOPER training. Competent Person Safety Training 8-Hour Supervisory Training 30-Hour OSHA Construction Safety Training First Aid and CPR Physical Demands & Work Environment This role requires lifting up to 50 pounds, extended standing or walking on project sites, climbing in and out of equipment, and working in confined spaces or at heights. Work conditions and demands may vary, with possible exposure to heavy machinery, chemicals, dust, fumes, noise, and extreme weather. Proper PPE, including protective eyewear, gloves, a hard hat, and steel-toed boots, is required. Effective communication, tool use, and adherence to safety protocols are essential. This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk Equal Opportunity Forgen is an equal-opportunity employer and prohibits discrimination based on any legally protected status. Privacy Policy At Forgen, we are committed to protecting your privacy. We collect and use your personal data to manage the recruitment process, including assessing your application, verifying information, and, if applicable, entering into an employment contract. Your information may be shared with authorized third parties who perform services on our behalf, such as background checks, and only where permitted by law. We implement appropriate security measures to safeguard your information and retain it only as long as necessary for recruitment and legal purposes. You have the right to access, correct, or request deletion of your data, and to withdraw your consent at any time where applicable. For questions or to exercise your rights, please contact *************. California Privacy Policy Agency Policy

GMF Steel Group is excited to hire highly motivated and hard-working individuals to weld, burn cope, and punch as needed. Applicants should thrive in a fast-paced environment and be excited to work in an energizing and innovative workspace. Whether you are experienced in working with steel or not, we are happy to provide you with growth opportunities to fine-tune your skills and explore your passions. We will train as needed and give you a career that grows with you! If you are experienced in fitting, we have opportunities starting at an increased pay rate available, as well. GMF wants our employees to be as excited to be a part of our rapidly growing company as we are, so we offer a merit incentive for all welders. Pay rates include $180/Month as incentive for the first 90 days, and after 90 days, you will be eligible for our standard production incentive. Candidates must demonstrate a strong commitment to safety and willingness to strive for GMF's high company standards. Salary Range: $16 - $25/Hour Dependent upon experience Eligible for a Performance Bonus Hours: Monday through Friday: 7:00AM - 4:30 PM Saturdays: 6:00AM-12:00PM Schedule adjusted according to workload; Occasional to constant according to schedule. Requirements: Ability to pass all pre-employment screening including weld tests Physical endurance to complete the necessary tasks Benefits/Perks: Health, Vision, Dental, Life Insurance, and a 401k Match Program Paid Time Off About GMF Steel Group: GMF Steel Group is an Inc 5000 company and one of the fastest growing Steel firms in the Southeastern US. GMF Steel Group is headquartered in Lakeland, Florida with offices in Tampa, Panama City, and Concord, NC. GMF Steel Group is in Lakeland, Florida and produces over 20,000 tons of Structural Steel annually with the latest BIM fabrication technology. GMF Steel Group services the Southeastern US and Gulf Coast with over 250 employees across 4 offices. GMF Steel Group core sectors of the Structural Steel market include Amusement Parks, Stadiums, Arenas, Offices, Education, Healthcare, Hospitality, Retail, Light and Heavy Industrial projects. GMF incorporates the latest technology through Building Information Modeling (BIM) to integrate all facets of Steel Construction and 4-D modeling. GMF Steel Group is an AISC Certified Fabricator and Erector. GMF Steel Group takes pride in recruiting and developing the best talent through education of the latest technology and best practices.

**About Us** At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. **Overview** The Welder will be welding Carbon Steel Pipe of all sizes. **Responsibilities** + Welds together components of products specified by layout, blueprints, diagram, and work order, welding procedures or oral instructions. + Sets controls on welding machine in conformance with WPS. + May weld in flat, horizontal, vertical, or overhead positions as qualified. + Must be able to read a tape measure. + Tack assemblies together using approved WPS. + Adheres to all company health, and safety policies. + Work in a safe manner. + Maintain a clean and organized workspace. **Qualifications** **Required Education, Experience, and Qualifications** + Welds together components of products specified by layout, blueprints, diagram, and work order, welding procedures or oral instructions. + Sets controls on welding machine in conformance with WPS. + May weld in flat, horizontal, vertical, or overhead positions as qualified. + Must be able to read a tape measure. + Tack assemblies together using approved WPS. + Adheres to all company health, and safety policies. + Work in a safe manner. + Maintain a clean and organized workspace. + Must be qualified under AWS D1.1 code for Overhead (4G) and Vertical (3G) using SMAW + Must pass welding test. + Experience working with stainless and carbon steel. + Experience working with overhead cranes. + High school diploma or equivalent. + Must be able to lift up to 50 lbs. + Must be able to understand fractions, decimals, and degrees of a circle. + General knowledge of structural members ( beams, channel, angle, pipe, and tubing **Preferred Education, Experience, and Qualifications** + OSHA 10 or 30 hour preferred **Travel Requirements** + 5-10% of time will be spent traveling to job site(s)/office location. **Physical Activities** + Climbing stairs. + Operating machinery and/or power tools + Remaining in a stationary position, often standing or sitting for prolonged periods **Environmental Conditions** + Noisy environment **Physical Demands** + Medium work that includes adjusting and/or moving objects up to 50 pounds **Pay Range** USD $24.28 - USD $32.41 /Hr. ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law. Submit a Referral (*************************************************************************************************************** **Job Locations** _US-FL-Wesley Chapel_ **ID** _2025-8979_ **Category** _Skilled Craft_ **Position Type** _Full-Time_ **Remote** _No_

Job Description PIPE WELDER ESSENTIAL FUNCTIONS: Welding in and out of position on various pipe configurations using SMAW and FCAW welding processes. Work closely with supervisors and pipe fitters to provide solutions to design deficiencies, system breakdowns, equipment malfunctions and other repair situations. Tear down/repair/repack/reassemble valves in place. Assess and repair reach-rods, deck actuators, valve handles, valve bodies and bonnets. Repair sanitary systems aboard vessels. Work with systems aboard vessels for fresh/potable water. Work with engine cooling systems. Repair or renew various other pieces of equipment as warranted. KNOWLEDGE, SKILLS AND ABILITIES: Successfully pass a 6GR Pipe Welding Test using SMAW and FCAW. Stainless Steel 6GR Pipe Welding Test will be SMAW. Follows ABS / USCG pipe welding and fitting requirements Assist in all types of valve, reach rod, heat exchanger or other miscellaneous mechanical work Will work independently with minimal supervision Conflict management, leadership, teambuilding and time management skills will be used Attention to detail, organizational, problem solving, analytical, critical thinking and decision making skills will be used EDUCATION AND EXPERIENCE: High School Diploma or Equivalent Two (2) years of pipe welding experience Must have tools; employer does not provide tools Shipyard Experience is preferred WORK ENVIRONMENT: Outdoors. Work in confined spaces, in the elements, aboard shipyard vessels, in the shop, and travel outside the facilities to other local ports in the area via company truck. HOURS: 40+ hours per week. E-Verify and Drug-Free Workplace LOCAL CANDIDATES PREFERRED, as relocation expenses are NOT covered. Benefits Two medical plans Two dental plans Vision plan Short-term and long-term disability insurance plans Company provided life insurance Employee elected supplemental life insurance for employees and family Employee Assistance Plan Work-site Benefits 401(K) plan with company match Gulf Marine Repair is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, and we consider all qualified individuals without regard to legally protected characteristics. Location: 33605 Job Posted by ApplicantPro

Labor One is currently hiring Structural welders in Pascagoula, MS at a Shipyard. Pay rate is up to $26.10 for night shift and $24.10 for day shift, if eligible. Job Requirements: Three years of experience in shipyard. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations, and warnings. Must pass a hearing test, drug test and PFT. Must be able to work any shift and overtime. Test: (3) position vertical, horizontal, overhead on 1” plate. (2) bends. Send resume to nena.diaz@laboronetx.com.

Job DescriptionDescription: Manthey Hospitality is looking for a skilled Welder (steel &aluminum) to cut and weld metals at our fleet maintenance center and vessels. Job duties range from new vessel construction to repairs to existing vessels, barges, gangways, and structures. The right candidate must be competent in steel and aluminum welding. Must pass a welding test. This position is land/dock-based. Responsibilities Safety first; use all safety precautions when completing daily tasks including but not limited to personal protective equipment, eye, ear, breathing protection, harnesses, scaffolding, and ladders. Determine the appropriate welding equipment and settings. Set up components for welding according to specifications (e.g., cut material with powered saws to match measurements). Operate angle grinders and sanders. Align components using calipers, rulers, etc., and clamp pieces. Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead). Repair machinery and other components by welding pieces and filling gaps. Test and inspect welded surfaces and structures to discover flaws. Maintain equipment in a condition that does not compromise safety. General duties associated with ship repair and maintenance. Additional responsibilities as assigned. Requirements:Qualifications Proven experience as a welder. Must pass welding test. Experience using a variety of welding equipment and procedures (TIG, MMA etc.). Experience in using electrical or manual tools (saws, squares, grinders, calipers, etc.). Knowledge of relative safety standards, PPE, and willingness to adhere to safety protocols and procedures. Excellent attention to detail, maintaining a clean and organized work area. Proficient in English. Successful completion of a relevant apprenticeship program is preferred. Professional Certification (e.g. an AWS welding certificate) will be a plus. Ability to read and interpret technical documents and drawings including blueprints. Take or read measurements to plan layout and procedures. Must have reliable transportation. Valid transportation Worker Identification Credential (TWIC Card) and/or ability to obtain and maintain. We are a drug-free workplace regulated by the United States Coast Guard. All employees must pass initial and ongoing random drug testing throughout employment. Experience Welding: 1 year (Preferred) Welding Certification (Preferred) Benefits 401(k) & Matching Health Insurance plus vision, dental, life, accident, disability, hospital, critical illness, identity, pet, legal, and more. Paid Time Off (PTO) Professional development assistance Subsidized Parking Complimentary passes and discounts to Manthey Hospitality brands M-F primary schedule, nights, weekends, and holidays as needed.

Forgen is dedicated to building a better future - for generations. A Welder is responsible for assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape. Their duties include reviewing blueprints, cutting metal into the appropriate shape and smoothing molten metal to remove creases. Forgen Overview Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work. Key Responsibilities Analyze and diagnose equipment malfunctions. Prepare required documentation including work orders, parts lists, and timecards in an accurate and timely manner. Reading and understanding blueprints prior to starting a project. Sourcing the materials to be used in the project. Measuring and cutting materials to specifications. Welding materials using the correct materials to join the metals together. Checking finished work to make sure that it falls within the tolerances marked on the blueprints. Perform assigned tasks in a timely, accurate and efficient manner. Follow manufacturer and company service guidelines and procedures to ensure safe quality work and to preserve and document component failure information for accurate failure analysis. Maintain a safe working environment and observe all safety procedures, laws, policies, and rules. Math and Measurement Skills: Tape measure, Scale, Calipers, Fillet weld gauge. Communicate with equipment manager and field managers in a manner which promotes a positive relationship. Work overtime as needed and within labor law guidelines. Operate heavy power-driven equipment. Ability to obtain forklift and boom lift certification. Other duties as assigned by supervisor. Basic Qualifications High school diploma/GED or equivalent. Five (5) or more years of welding experience. Valid Driver's License and ability to drive on behalf of company business. Preferred Qualifications Preferred knowledge on the following topics: Operational characteristics of a variety of heavy, power-driven equipment. Maintenance requirements of heavy, power-driven equipment. Methods and materials used in general construction and maintenance work. Principles and techniques of field maintenance activities. Traffic laws, ordinances, and rules involved in heavy equipment operation. Occupational hazards and standard safety practices. Welding Machine set-up: Mig/Tig welding and hard facing of carbon; low alloy steels using solid and flux-cored wire; finishing of welds (chipping, grinding, sanding). Fabricating carbon, stainless and low alloy steels; Blueprint Reading and Weld Symbols (AWS and ISO); Weld joint prep; Hand plasma and oxy/fuel torches. The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary. 40 Hour HAZWOPER training. Competent Person Safety Training 8-Hour Supervisory Training 30-Hour OSHA Construction Safety Training First Aid and CPR Physical Demands & Work Environment This role requires lifting up to 50 pounds, extended standing or walking on project sites, climbing in and out of equipment, and working in confined spaces or at heights. Work conditions and demands may vary, with possible exposure to heavy machinery, chemicals, dust, fumes, noise, and extreme weather. Proper PPE, including protective eyewear, gloves, a hard hat, and steel-toed boots, is required. Effective communication, tool use, and adherence to safety protocols are essential. This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk Equal Opportunity Forgen is an equal-opportunity employer and prohibits discrimination based on any legally protected status. Privacy Policy At Forgen, we are committed to protecting your privacy. We collect and use your personal data to manage the recruitment process, including assessing your application, verifying information, and, if applicable, entering into an employment contract. Your information may be shared with authorized third parties who perform services on our behalf, such as background checks, and only where permitted by law. We implement appropriate security measures to safeguard your information and retain it only as long as necessary for recruitment and legal purposes. You have the right to access, correct, or request deletion of your data, and to withdraw your consent at any time where applicable. For questions or to exercise your rights, please contact *************. California Privacy Policy Agency Policy