Welder fitter jobs in Massachusetts - 96 jobs

The Mastectomy and Compression Fitter performs specialty fittings and provides durable medical equipment (DME) items as medically necessary and directed by a physician order. The fitter holds a customer service-oriented position that involves working directly with patients in a professional clinical capacity. The role assesses patient status pre- or post-surgical intervention and conducts product selection, as well as fitting patients for bras, compression garments and prostheses. Will be responsible for assisting with determining the right product and size for the patient. Places custom orders from manufacturers, suppliers, with knowledge of the product comfort and fit. Works with patients, patient families and revenue cycle to process prior authorizations from insurance companies and prescription from providers as needed. Located in Boston and the surrounding communities, Dana-Farber Cancer Institute is a leader in life changing breakthroughs in cancer research and patient care. We are united in our mission of conquering cancer, HIV/AIDS, and related diseases. We strive to create an inclusive, diverse, and equitable environment where we provide compassionate and comprehensive care to patients of all backgrounds, and design programs to promote public health particularly among high-risk and underserved populations. We conduct groundbreaking research that advances treatment, we educate tomorrow's physician/researchers, and we work with amazing partners, including other Harvard Medical School-affiliated hospitals. **PRIMARY DUTIES AND RESPONSIBILITIES:** + Provides image consulting services for Cancer patients to include patient consultation and patient education. + Provides initial patient consultation and development of individualized appearance plan post-surgery. Identifies resources to assist client with appearance normalization. + Direct on-hands contact with patients, taking measurements for Mastectomy and /or Lymphedema products. Ensures a proper fit for each patient. + Provides patient education and services for different scenarios and activities such as swim wear, suggestions to help achieve symmetry and garments to help treat Lymphedema. + Direct on-hands contact with patients. + Measures by hand or by scanning patient correctly for specific limb/and or body part, for OTC or custom garments. + Completes orders on supplier portals with measurements for custom order. + Chooses the best therapeutic compression garment; evaluates the best therapeutic path based on a variety of factors including age, mobility, size and shape of your limb, skin or wound-related issues and cost. Ensures a proper fit for each patient. + Secures written orders for ALL DME items. + Collaborates with Occupational therapists within DFCI and throughout community for their patient orders. + Prepares and ensures all necessary documentations for patient orders are completed. Documents visits and follows-up with clinical care team as necessary. + Coordinates incoming requests for patients orders via e-mails/faxes and Epic In-Basket messages; takes ownership and responds appropriately to all messages. + Maintains current knowledge and expertise in applicable DME codes for insurable goods. + Practices in accordance with accreditation standards for Mastectomy Fitter and CMF certification. Completes continuing education on Compression & Mastectomy for patients and other staff. + Verifies insurance coverage and obtains pre-authorizations as appropriate. + Effectively shares knowledge of Lymphedema and other compression therapy products with customers and uses that knowledge when ordering specialty products. + Assists with the coordination of the activities and operations of Friends' Place. + Maintains DME merchandise inventory. + Covers the front desk and processes transactions when needed; provides customer service and daily operations. + Facilitates product sales. Comprehensive assessment of outpatient clients for garment, over- the-counter (OTC) or custom. Planning and implementing proper garments to reduce pain, restore function, prevent permanent disability, and restore independence, using various treatment techniques. + Assists with the coordination of the activities and operations of Friends' Place. Maintains on site inventory and samples for sizing. + Actively promotes Friends' Place to internal and external physicians, staff, and patients to create awareness of services. Participates in providing support programs for such issues as compression therapy. + Ensures safe and clean environment and maintains equipment and supplies while adhering to all hospital and departmental infection control procedures. **SUPERVISORY RESPONSIBILITIES:** None **PATIENT CONTACT:** Yes **MINIMUM JOB QUALIFICATIONS:** + Associate or bachelor's degree preferred. High school diploma or GED required. + Certification or ability to obtain certification from accredited agency (BOC or ABC) within first nine months for Mastectomy Fitter + Previous experiences as professional massage therapist preferred. + Physical therapy/Occupational Therapy setting experience as aide or assistant preferred. + Previous retail and customer/patient service experience in a healthcare setting preferred. + Previous work with insurance plans preferred. **KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:** + Knowledge of Mastectomy and Compression garment fitting. + Analytical skills to evaluate patients' condition, capabilities, and progress to develop appropriate treatment programs. + Proficient knowledge of Microsoft Office applications and POS Systems + Knowledgeable of supplier's products and measuring requirements. + Excellent communication, organizational, time management, and customer service skills + Strong attention to detail + Ability to work with a variety of people, and make patients feel educated, comfortable, and confident in their care. + Ability to adapt to and embrace change. + Ability to function as an integral member of a team. + Ability to multitask, while being attentive to customers and patients. At Dana-Farber Cancer Institute, we work every day to create an innovative, caring, and inclusive environment where every patient, family, and staff member feels they belong. As relentless as we are in our mission to reduce the burden of cancer for all, we are committed to having faculty and staff who offer multifaceted experiences. Cancer knows no boundaries and when it comes to hiring the most dedicated and compassionate professionals, neither do we. If working in this kind of organization inspires you, we encourage you to apply. Dana-Farber Cancer Institute is an equal opportunity employer and affirms the right of every qualified applicant to receive consideration for employment without regard to race, color, religion, sex, gender identity or expression, national origin, sexual orientation, genetic information, disability, age, ancestry, military service, protected veteran status, or other characteristics protected by law. **EEO Poster** . Pay Transparency Statement The hiring range is based on market pay structures, with individual salaries determined by factors such as business needs, market conditions, internal equity, and based on the candidate's relevant experience, skills and qualifications. For union positions, the pay range is determined by the Collective Bargaining Agreement (CBA). $44,500.00 - $54,400.00

As a family-owned and operated company, we feel a special obligation to the employees who comprise our Taco family. We are committed to offering employees access to the tools necessary to live long and productive lives. We strive to instill in all of our employees: A positive mental attitude that helps us to be a leader in the industry A commitment to building strong relationships, both inside and outside the organization A desire to learn, grow, and contribute to moving our strategy forward A need to create and to innovate Employment Type: Regular Full-Time Hourly Shift: 2nd Shift Work Status: Onsite Position Summary The Welder Fitter A performs a wide variety of complex and customized welding duties on standard and custom engineered parts. They perform very complex custom weldment fit up on tanks and heat exchangers of all sizes and weights using the gas metal arc welding/flux cored arc welding (GMAW/FCAW) welding process. This role directs other team members on their tasks when working in tandem on the same vessel and they perform the most complicated and dangerous rigging tasks when moving large vessels. Measures of success: Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within Timely completion of all welding operations within the operational time limits and according to Taco's quality protocols Successfully troubleshoot complex welding and fit-up issues independently Responsibilities Responsibilities include but are not limited to: Works independently using drawings, specifications, WPS and verbal instructions. Uses various types of welding equipment and a variety of common hand and power tools. Will fit up and fully weld the most complex heat exchangers and tanks including custom fabrications and extremely complex tanks, with minimal guidance by reading and interpreting standard and custom part drawings. This can take place at elevated heights, while working on top of tanks or from elevated work platforms. Completes the most complicated welding repairs and performs final welding operations on complex weldments as needed. Must be able to perform confined space welding as needed. Uses FCAW/GMAW welding process, with or without backing, in the flat, horizontal, vertical and overhead positions, on both steel and stainless-steel materials. Will weld full penetration welds on small diameter pipe using the GMAW process. Must be able to use a scissor lift when needed to access welding work at heights. Interacts with the Engineering team on designs and fabrication challenges as needed. Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to. Performs the most complex lifting/rigging activities using 10- & 20-ton cranes. Monitors quality of work, makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to supervisor. Maintains necessary records, completes transactions within the Enterprise Resource Planning (ERP) system and accesses company intranet as needed for work instructions. Ensures their own safety and that of team members. Troubleshoots engineering drawings and reviews with management when issues are identified. Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices. Qualifications Required: High school diploma or equivalent Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables: FCAW/GMAW and SAW processes Steel-steel, steel-stainless, stainless-stainless Flat, horizontal, vertical and overhead positions With or without backing Small pipe diameter in rotated horizontal position 7+ years of welding experience using drawings, specifications, charts and welding equipment Strong knowledge of shop math and basic geometry concepts Must be proficient in numerous welding procedure specifications including small pipe qualification and various welding positions Ability to follow verbal and written instructions and effectively apply to assigned work Ability to navigate multiple windows in company ERP system to access production and resource data Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time sometimes at height of up to 10 feet Ability to manage time effectively to meet strict time deadlines and production volumes Requires judgment to comply with instructions, solve problems, and the ability to solve minor technical issues without guidance Travel: minimal to none Preferred: Graduate of a welding and fabrication vocational or technical training program 3+ years of experience in a pipe, pressure vessel or structural welding shop Work Environment This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas. This position requires extensive physical labor and the ability to work off ladders, work platforms etc. This position also requires occasional work in confined space. This position reports into the site every day. Management This position has no direct reports. Full compensation packages are based on candidate experience and certifications.Salary range$35.68-$38.30 USD Benefits With nearly 1,000 people working at Taco worldwide, each with their own story, you will discover a sense of community and diverse, intelligent colleagues who help us innovate, create and explore. Taco employees benefit from a company that: Provides competitive salaries and benefits Offers tuition reimbursement, career development, and on-site training programs in our learning center Believes in sharing profits with its employees Is mindful about family, health and well-being Fosters conditions that allow people and communities to reach their full potential Embraces and celebrates diversity #TacoComfortSolutions

Connexion's mission is to provide "best in class" services to job seekers. We strive to achieve excellence in job placement, staffing, and recruiting services, while treating candidates with the professionalism and respect they deserve. Title: Welder Fitter A Hiring Organization: Connexion Systems & Engineering Compensation, Benefits, and Employment Type Duration: Direct Hire Pay Rate: $33.14-$36.95/hr. (2 nd shift includes 10% differential) Job Location: Fall River, MA Schedule: 2 nd Shift M-F 3pm-11:30pm Job#: 17135 Position Summary: The Welder Fitter A performs a wide variety of complex and customized welding duties on standard and custom engineered parts. They perform very complex custom weldment fit up on tanks and heat exchangers of all sizes and weights using the gas metal arc welding/flux cored arc welding (GMAW/FCAW) welding process. This role directs other team members on their tasks when working in tandem on the same vessel and they perform the most complicated and dangerous rigging tasks when moving large vessels. Measures of success: Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within Timely completion of all welding operations within the operational time limits and according to our quality protocols Successfully troubleshoot complex welding and fit-up issues independently Responsibilities: Responsibilities include but are not limited to: Works independently using drawings, specifications, WPS and verbal instructions. Uses various types of welding equipment and a variety of common hand and power tools. Will fit up and fully weld the most complex heat exchangers and tanks including custom fabrications and extremely complex tanks, with minimal guidance by reading and interpreting standard and custom part drawings. This can take place at elevated heights, while working on top of tanks or from elevated work platforms. Completes the most complicated welding repairs and performs final welding operations on complex weldments as needed. Must be able to perform confined space welding as needed. Uses FCAW/GMAW welding process, with or without backing, in the flat, horizontal, vertical and overhead positions, on both steel and stainless-steel materials. Will weld full penetration welds on small diameter pipe using the GMAW process. Must be able to use a scissor lift when needed to access welding work at heights. Interacts with the Engineering team on designs and fabrication challenges as needed. Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to. Performs the most complex lifting/rigging activities using 10- & 20-ton cranes. Monitors quality of work makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to supervisor. Maintains necessary records, completes transactions within the Enterprise Resource Planning (ERP) system and accesses company intranet as needed for work instructions. Ensures their own safety and that of team members. Troubleshoots engineering drawings and reviews with management when issues are identified. Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices. Required Qualifications: High school diploma or equivalent Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables: FCAW/GMAW and SAW processes Steel-steel, steel-stainless, stainless-stainless Flat, horizontal, vertical and overhead positions With or without backing Small pipe diameter in rotated horizontal position 7+ years of welding experience using drawings, specifications, charts and welding equipment Strong knowledge of shop math and basic geometry concepts Must be proficient in numerous welding procedure specifications including small pipe qualification and various welding positions Ability to follow verbal and written instructions and effectively apply to assigned work Ability to navigate multiple windows in company ERP system to access production and resource data Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time sometimes at height of up to 10 feet Ability to manage time effectively to meet strict time deadlines and production volumes Requires judgment to comply with instructions, solve problems, and the ability to solve minor technical issues without guidance Travel: minimal to none Preferred Qualifications: Graduate of a welding and fabrication vocational or technical training program 3+ years of experience in a pipe, pressure vessel or structural welding shop Work Environment: This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas. This position requires extensive physical labor and the ability to work off ladders, work platforms etc. This position also requires occasional work in confined space. This position reports into the site every day. This position has no direct reports. Please use the apply button to submit your resume for consideration. A Connexion Representative will contact you shortly. You may also send your resume and cover letter via email to the recruiter listed below. You MUST include the Job# and Job Title in your subject line. If you are active in a job search but this job is not for you, please reach out to *************************. We would be glad to help you find the perfect job!

As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: We are seeking a motivated and detail-oriented Welder II for 2nd shift to join our aerospace manufacturing team. The ideal candidate will perform core welding work, ensure precision welding of aerospace components, and adhere to strict quality standards. This role offers an excellent opportunity to develop technical skills in a fast-paced, innovative environment. Location: Newburyport, MA. This position is 100% onsite. Responsibilities: Operate TIG, MIG, and other welding equipment safely and effectively. Maintain and care for welding equipment and tools, ensuring they are in proper working condition. Identify and troubleshoot welding defects and implement corrective actions. Collaborate with engineers, supervisors, and team members to optimize welding processes and production flow. Maintain accurate records of completed work and adhere to production documentation requirements. Perform precision welding on thin stainless-steel parts ranging from 0.020" to 0.125" in thickness. Read, interpret, and follow blueprints, technical drawings, and work instructions to produce components that meet exact specifications. Inspect completed welds for quality, strength, and appearance, making adjustments as necessary to ensure compliance with standards. Maintain and care for welding equipment and tools, ensuring they are in proper working condition. Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications Responsible for the manufacture and maintenance of component parts and fixtures as required Inspect completed work with a variety of measuring equipment such as height gages, micrometers, verniers, dial indicators and CNC coordinate inspection machine. Required Qualifications: High School Diploma or equivalency certificate. 3-5 years of welding experience in a manufacturing environment. Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Welding certification (e.g., AWS or equivalent). Experience in a high-volume manufacturing or production environment. Proven experience in precision welding, preferably with thin stainless steel or similar materials. Proficiency in TIG, MIG, and other welding techniques applicable to thin-gauge metals. Strong ability to work with high accuracy and maintain tight tolerances. Solid understanding of metallurgy and welding properties of stainless steel. Familiarity with welding codes and standards (e.g., AWS). Excellent hand-eye coordination, dexterity, and attention to detail. Excellent communication and organizational skills, with the ability to work independently or as part of a team. Working Conditions: Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to frequently sit, stand and walk. Must be able to lift and carry up to 30 pounds. Compensation: In compliance with pay transparency requirements, the salary range for this role is $30-40 hourly. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience, education, and geographic location. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

* Perform high-quality welds using TIG welding with a foot pedal or laser processes, ensuring precision and strong joints * Demonstrate expertise in metals and the properties of various alloys, including materials as thin as 19-gauge * Interpret and understand blueprints and welding callouts to guide fabrication and assembly * Utilize precise measuring tools and methods, including calipers, micrometers, and scales, to ensure accuracy * Operate additional hand-welding and flame-cutting equipment, such as oxyacetylene torches, for cutting, heating, or brazing tasks * Conduct thorough assessments to ensure all critical weld requirements and quality standards are met * Apply fixturing techniques and use specialized tools to achieve precise fitment of parts before welding * Consistently follow all required safety protocols and correctly use personal protective equipment * Proficient in Tig welding thin-gauge sheet steel and aluminum * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to draft routine reports and correspondence. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent, and to draw and interpret bar graphs. * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. * Ability to deal with problems involving several concrete variables in standardized situations. * The employee is regularly required to stand. * The employee is frequently required to walk, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. * The employee is occasionally required to sit, climb, or balance, and stoop, kneel, crouch, or crawl. * Lift and/or move up to 50 pounds. * While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate. What's in it for you on Day 1: * Medical, dental and vision insurance plans * Prescription Drug Plans * Basic Life Insurance * 401k plan with company match * Tuition Reimbursement Program * Employee Referral Program * Flexible PTO * Paid Holidays * Opportunities for professional development and growth * A dynamic and collaborative work environment focused on innovation and continuous improvement. Knowles' Cornell Dubilier brand is a leading designer and manufacturer of custom high-energy discharge capacitors used in a wide range of medical, military, and commercial pulsed energy applications. Knowles is committed to providing a competitive and fair total compensation package for all employees. One element in our total compensation package is base pay. The starting base pay for this role is targeted to be between $26.00 to $29.00 per hour. Individual compensation decisions are based on a number of factors, including but not limited to previous experience and skills acquired prior to joining Knowles, cost of living in the assigned work location, assigned schedule, and salaries of similarly situated peers at the company. It is to be expected that candidates will come to us with different sets of skills and experiences and therefore will be paid at different points in the stated range. We recognize that the person(s) we select for hire may be less experienced or more experienced than the role as posted; if this is the case, any updates to available salary ranges will be communicated with candidates during the recruitment process. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Equal Opportunity Statement: Knowles Precision Devices prohibits pay discrimination and discrimination of any kind based on race, color, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation, or other legally protected status. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Our Lynn, MA team is looking to hire a Tig Welder to perform layout, set-up and welding on a variety of aircraft engine component parts and assemblies. In this role you can expand your career welding various exotic materials into critical parts for commercial and/or military aircraft. You will receive training to achieve necessary certifications on required processes to set you up for success and ensure that you are working at required quality and efficiency levels. **Job Description** **About GE Aerospace** If you want to do work that really matters among a team of spirited and collaborative individuals, you need to know more about GE Aerospace. We've become a world leader in the design, development and manufacture of advanced aviation technologies including jet engines, components, and integrated systems for commercial and military aircraft. We're a people-first organization that will bring out your best ideas and performance as part of our on-going LEAN transformation. We believe that the world works better when it flies. Do you? If so, come aboard. **Working at our Lynn Facility** Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With more 2,500 employees and 1.6 million sqft of manufacturing space, we're making a huge contribution to the future of flight. And, considering that very first jet engines were born here in 1942, we clearly are the career home of people who are deeply knowledgeable about building quality engines. What's more, GE Aerospace has invested more than $100 million in our facility in the last five years alone. By engaging with highly collaborative teams, we're reaching for new Sustainable Aviation Fuel milestones every year. And by encouraging our teams to join us in extensive community service and volunteerism, we're making a difference in all the ways that matter. Here are just a few of the best reasons you will want to consider us: + Do work with a real purpose helping to solve the global challenge of how the world flies more sustainably. + Be a part of a global workforce of diverse backgrounds, perspectives, ideas, and experiences where everyone feels supported and respected. + Earn merit-based rewards and incentives. + Free Onsite Parking. + Set work schedule with no mandatory overtime. + Work in a climate-controlled building out of the elements. + Have opportunities for continuous learning and development. **Qualifications/Requirements:** + High School Diploma/GED + **1 year of TIG welding experience in a manufacturing environment or have successfully completed a welding co-op or course with a certified agent** + Must be able to pass initial welding skills demonstration + Able to work from planning and verbal instructions, prints or sketches require the ability to read, write, and speak English. + Distance Vision 20/30 (US) using corrected or uncorrected vision in either eye + Near Vision corrected or uncorrected in either eye, shall be the ability to read Jaeger No. 2 type at 16 inches (40.64 cm) + Ability to lift, move and manipulate fixtures and component hardware up to 25 lbs. with or without reasonable accommodations + $1000 Dollar sign on bonus for qualified candidates! **Desired Characteristics:** + Previous welding and fabrication experience on aerospace hardware + Previous held weld certification(s) in: corrosive resistant and heat resistant ferrous alloys, nickel base alloys, cobalt-base alloys, aluminum alloys, and titanium alloys **About GE Aviation** Aviation is a world-leading provider of jet and turboprop engines, as well as integrated systems for commercial, military, business and general aviation aircraft. GE Aviation is advancing bold technology solutions including open fan, hybrid electric, and new engine core designs to reduce the environmental impact of flight. Also, partnering with NASA and other leaders, GE Aviation is working to accelerate the introduction of hybrid electric flight technologies for commercial aviation. For more than 100 years, GE Aviation has worked to invent the future of flight and that work continues today. The pay for this position is 26/hr. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 12/31/2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

For a description, see PDF at: ********************** s3. amazonaws. com/wp-content/uploads/sites/45/**********5111/Welder-4. pdf

Purpose/Scope: To provide general construction labor tasks, in an efficient and safe manner, as part of a welding for precast panels. Essential Duties and Responsibilities: Completes general construction labor tasks necessary to caulk precast concrete panels Takes work direction from welding crew foreperson May perform work of a miscellaneous nature as directed by foreperson Uses materials/supplies in an efficient manner Handles equipment in a responsible manner Follows established safety procedures and policies Basic Qualifications: 3G & 4G Certified Welder AWS Certification Other Required Qualifications: Ability to carry out simple and complex verbal instructions Ability to work well with others and maintain professional conduct at all times Ability to work from ladders and aerial work platforms above 20 ft Ability to obtain membership to local Laborers union General knowledge of construction practices Valid driver's license and reliable means of transportation Ability to travel extensively (50% of the time or more, including overnights) and work overtime as needed Preferred Qualifications: 2+ years of construction or manual labor experience High school diploma or equivalent Physical Requirements: Field: Must be able to traverse uneven ground, move minimum of 50lbs., spatial awareness/depth perception, climb on a flatbed semi-trailer Work Environment: Field: All types of weather conditions (year-round, Mid-west and Northeast), dirt/dust, noise from heavy machinery/vehicles

For description, visit PDF: ************ fwwebb. com/careers/pdfs/Canton_Welder_2nd. pdf

Experience with gas metal arc welding/flux cored arc welding (GMAW/FCAW) welding process. Pipe fitter experience, and ASME pressure vessel welding experience Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within Timely completion of all welding operations within the operational time limits and according to company quality protocols Successfully troubleshoot complex welding and fit-up issues independently Responsibilities Works independently using drawings, specifications, WPS and verbal instructions. Uses various types of welding equipment and a variety of common hand and power tools. Will fit up and fully weld the most complex heat exchangers and tanks including custom fabrications and extremely complex tanks, with minimal guidance by reading and interpreting standard and custom part drawings. This can take place at elevated heights, while working on top of tanks or from elevated work platforms. Completes the most complicated welding repairs and performs final welding operations on complex weldments as needed. Must be able to perform confined space welding as needed. Uses FCAW/GMAW welding process, with or without backing, in the flat, horizontal, vertical and overhead positions, on both steel and stainless-steel materials. Will weld full penetration welds on small diameter pipe using the GMAW process. Must be able to use a scissor lift when needed to access welding work at heights. Interacts with the Engineering team on designs and fabrication challenges as needed. Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to. Qualifications High school diploma or equivalent Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables: FCAW/GMAW and SAW processes Steel-steel, steel-stainless, stainless-stainless Flat, horizontal, vertical and overhead positions With or without backing Small pipe diameter in rotated horizontal position 7+ years of welding experience using drawings, specifications, charts and welding equipment Strong knowledge of shop math and basic geometry concepts Must be proficient in numerous welding procedure specifications including small pipe qualification and various welding positions Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time sometimes at height of up to 10 feet Preferred: Graduate of a welding and fabrication vocational or technical training program 3+ years of experience in a pipe, pressure vessel or structural welding shop View all jobs at this company

We are currently seeking experienced Pipe Welders to join our growing team for ongoing commercial, industrial, and multi-residential projects. Candidates should have at least 2 years of experience, the ability to read and interpret blueprints, and be proficient in various welding techniques (TIG, MIG, Stick). Requirements: Minimum 2 years of pipe welding experience Familiarity with carbon steel and stainless steel Ability to pass weld tests Basic hand tools and PPE OSHA 10 certification Reliable transportation If you're interested, please submit your resume for review and contact Ryan at ************. View all jobs at this company

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. References blueprint and confers with the Lead person to determine job requirements. MIG welding on aluminum conductors. Gathers necessary materials and performs layout per specifications. Sets up the welding machine and adjusts settings. Operates a welding gun to weld aluminum pieces together. Visually examines welds for adherence to quality standards; rewelds defective joints and does some minor grinding when needed. Operates cutting torch and manual plasma cutter as needed. Applies the weld stencil and notifies the Lead person or Inspector when the product is ready for inspection. Performs ongoing housekeeping duties to keep the work area clear of scrap and debris. YOU HAVE: HS diploma or GED preferred. At least 2 years of experience required. At least 2 years of welding experience. Welding certification, required. MIG/TIG welding experience Intermediate blueprint reading Ability to read blueprints beyond a basic level, including orientation and symbols. Experience using hand tools (screwdrivers, pliers), grinders, and millimeter tape measures. Familiarity with suage equipment (pneumatic system for pinching materials). Experience with soldering and working on circuit boards. Comfortable using overhead cranes to move large equipment. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $16.30 - $30.20 Per Hour Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

The Certified Welder will participate in the installation or maintenance and inspection of HVAC, Utility and process Piping systems. Role and Responsibilities: Work on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems. Work with materials that include carbon steel and stainless steel Regular attendance at assigned location that may include office or other project sites Clean or prep pipe and fittings using wire brushes or portable grinders Position and secure work pieces utilizing hoists, cranes, or hand tools Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten, gas metal, flux-cored, plasma, and shieled metal arc, resistance welding, & submerged arc welding Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Clamp, hold, tack-weld, heat-bend, grind, or bolt component parts to obtain required configurations Additional duties as directed by job site foreman, project manager, and supervisor Essential Skills & Characteristics: * Ability to work independently or as part of a team * Follow plans and instructions from supervisors or more experienced workers * Strict adherence to all safety rules and quality * Interact with all co-workers and clients in an attentive courteous manner * At times may perform clerical/administrative duties * Detect faulty operation of equipment or defective materials and notify supervisors * Knowledge of materials, methods, and tools involved in industrial construction * Participate in site housekeeping Educational & Experience Requirements: * High School diploma or relevant field experience * 5 years of Field Experience, trade school or apprenticeship * Applicate State Trade License * OSHA 10 certification * Understanding and development of daily Job Hazard Analysis (JHA) * Ability to complete a 6G Coupon for various metals and procedures AZ Corporation is an employee owned, tobacco-free, equal opportunity employer, we do not discriminate based on marital status, race, color, creed, gender, sex, religion, national origin, gender identity, age, veteran status, union affiliation, physical or mental disability, citizenship status, sexual orientation, genetic information, or other legally protected status

Job DescriptionDescriptionThis position is responsible for TIG and Laser welding components with varying thickness Key Responsibilities Perform high-quality welds using TIG welding with a foot pedal or laser processes, ensuring precision and strong joints Demonstrate expertise in metals and the properties of various alloys, including materials as thin as 19-gauge Interpret and understand blueprints and welding callouts to guide fabrication and assembly Utilize precise measuring tools and methods, including calipers, micrometers, and scales, to ensure accuracy Operate additional hand-welding and flame-cutting equipment, such as oxyacetylene torches, for cutting, heating, or brazing tasks Conduct thorough assessments to ensure all critical weld requirements and quality standards are met Apply fixturing techniques and use specialized tools to achieve precise fitment of parts before welding Consistently follow all required safety protocols and correctly use personal protective equipment Skills, Knowledge and Expertise Proficient in Tig welding thin-gauge sheet steel and aluminum Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to draft routine reports and correspondence. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent, and to draw and interpret bar graphs. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. The employee is regularly required to stand. The employee is frequently required to walk, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. The employee is occasionally required to sit, climb, or balance, and stoop, kneel, crouch, or crawl. Lift and/or move up to 50 pounds. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate. BenefitsWhat's in it for you on Day 1: Medical, dental and vision insurance plans Prescription Drug Plans Basic Life Insurance 401k plan with company match Tuition Reimbursement Program Employee Referral Program Flexible PTO Paid Holidays Opportunities for professional development and growth A dynamic and collaborative work environment focused on innovation and continuous improvement. Knowles' Cornell Dubilier brand is a leading designer and manufacturer of custom high-energy discharge capacitors used in a wide range of medical, military, and commercial pulsed energy applications. Knowles is committed to providing a competitive and fair total compensation package for all employees.One element in our total compensation package is base pay. The starting base pay for this role is targeted to be between $26.00 to $29.00 per hour. Individual compensation decisions are based on a number of factors, including but not limited to previous experience and skills acquired prior to joining Knowles, cost of living in the assigned work location, assigned schedule, and salaries of similarly situated peers at the company. It is to be expected that candidates will come to us with different sets of skills and experiences and therefore will be paid at different points in the stated range. We recognize that the person(s) we select for hire may be less experienced or more experienced than the role as posted; if this is the case, any updates to available salary ranges will be communicated with candidates during the recruitment process. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Equal Opportunity Statement: Knowles Precision Devices prohibits pay discrimination and discrimination of any kind based on race, color, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation, or other legally protected status. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

SummaryOur Lynn, MA team is looking to hire a Tig Welder to perform layout, set-up and welding on a variety of aircraft engine component parts and assemblies. In this role you can expand your career welding various exotic materials into critical parts for commercial and/or military aircraft. You will receive training to achieve necessary certifications on required processes to set you up for success and ensure that you are working at required quality and efficiency levels.Job Description About GE Aerospace If you want to do work that really matters among a team of spirited and collaborative individuals, you need to know more about GE Aerospace. We've become a world leader in the design, development and manufacture of advanced aviation technologies including jet engines, components, and integrated systems for commercial and military aircraft. We're a people-first organization that will bring out your best ideas and performance as part of our on-going LEAN transformation. We believe that the world works better when it flies. Do you? If so, come aboard. Working at our Lynn Facility Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With more 2,500 employees and 1.6 million sqft of manufacturing space, we're making a huge contribution to the future of flight. And, considering that very first jet engines were born here in 1942, we clearly are the career home of people who are deeply knowledgeable about building quality engines. What's more, GE Aerospace has invested more than $100 million in our facility in the last five years alone. By engaging with highly collaborative teams, we're reaching for new Sustainable Aviation Fuel milestones every year. And by encouraging our teams to join us in extensive community service and volunteerism, we're making a difference in all the ways that matter. Here are just a few of the best reasons you will want to consider us: Do work with a real purpose helping to solve the global challenge of how the world flies more sustainably. Be a part of a global workforce of diverse backgrounds, perspectives, ideas, and experiences where everyone feels supported and respected. Earn merit-based rewards and incentives. Free Onsite Parking. Set work schedule with no mandatory overtime. Work in a climate-controlled building out of the elements. Have opportunities for continuous learning and development. Qualifications/Requirements: High School Diploma/GED 1 year of TIG welding experience in a manufacturing environment or have successfully completed a welding co-op or course with a certified agent Must be able to pass initial welding skills demonstration Able to work from planning and verbal instructions, prints or sketches require the ability to read, write, and speak English. Distance Vision 20/30 (US) using corrected or uncorrected vision in either eye Near Vision corrected or uncorrected in either eye, shall be the ability to read Jaeger No. 2 type at 16 inches (40.64 cm) Ability to lift, move and manipulate fixtures and component hardware up to 25 lbs. with or without reasonable accommodations $1000 Dollar sign on bonus for qualified candidates! Desired Characteristics: Previous welding and fabrication experience on aerospace hardware Previous held weld certification(s) in: corrosive resistant and heat resistant ferrous alloys, nickel base alloys, cobalt-base alloys, aluminum alloys, and titanium alloys About GE Aviation Aviation is a world-leading provider of jet and turboprop engines, as well as integrated systems for commercial, military, business and general aviation aircraft. GE Aviation is advancing bold technology solutions including open fan, hybrid electric, and new engine core designs to reduce the environmental impact of flight. Also, partnering with NASA and other leaders, GE Aviation is working to accelerate the introduction of hybrid electric flight technologies for commercial aviation. For more than 100 years, GE Aviation has worked to invent the future of flight and that work continues today. The pay for this position is 26/hr. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 12/31/2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions. Heat oxygen/propane heating torch. Perform grinding and pick up work as needed. Complete air carbon arc gouging. Properly use fillet and butt gauges. Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material. Requirements Minimum 8 years of naval/commercial welding experience. Successfully pass several tests over a three-week period. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

As a family-owned and operated company, we feel a special obligation to the employees who comprise our Taco family. We are committed to offering employees access to the tools necessary to live long and productive lives. We strive to instill in all of our employees: A positive mental attitude that helps us to be a leader in the industry A commitment to building strong relationships, both inside and outside the organization A desire to learn, grow, and contribute to moving our strategy forward A need to create and to innovate Employment Type: Regular Full-Time Shift: 2nd Shift Work Status: On-site Position Summary The Welder A performs a variety of standardized as well as customized welding duties on standard and nonstandard parts. Performs less complex custom weldment fit up using the gas metal arc welding/flux cored arc welding (GMAW/FCAW) welding processes. Must be proficient in numerous Welding Procedure Specifications (WPS) including small pipe qualification and various welding positions. Measures of Success: Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within. Timely completion of all welding operations within the operational time limits and according to Taco's quality protocols. Capability of welding fillet and groove welds without backing in both the horizontal and flat positions. Ability to resolve minor welding and fit-up issues with minimal guidance. Responsibilities Responsibilities include but are not limited to: Works mostly independently using drawings, specifications, WPS and verbal instructions. Uses various types of welding equipment and a variety of common hand and power tools. Performs fit up and fully welds a variety of tank and heat exchanger subassemblies including standard and custom fabrications, with minimal guidance, by reading and interpreting standard and custom part drawings. Performs final welding operations on complex weldments that have been fit up by others. Performs extensive final welding operations for long periods of time in awkward positions or at elevated heights. Uses FCAW/GMAW welding process, with or without backing, in the flat, horizontal and vertical positions, on both steel and stainless-steel materials. Welds full penetration welds on small diameter pipe using the gas tungsten arc welding (GTAW) process. Uses a scissor lift when needed to access welding work at heights. With assistance and supervision, may perform more complicated welding and fit up, using various equipment. Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to. Monitors quality of work makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to Supervisor. Maintains necessary records, completes transactions within the Enterprise Resource Planning (ERP) system and accesses company intranet as needed for work instructions. Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices. Performs other related duties as assigned or directed. Qualifications Required: High school diploma or equivalent Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables: FCAW/GMAW and SAW processes Steel-steel, steel-stainless, stainless-stainless material Flat, horizontal and vertical positions With or without backing Small pipe diameter in rotated horizontal position 3+ years of welding experience using drawings, specifications, charts and welding equipment Ability to follow verbal and written instructions and effectively apply to assigned work Ability to navigate multiple windows in company ERP system to access production and resource data Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time sometimes at height of up to 10 feet Ability to manage time effectively to meet strict time deadlines and production volumes Requires judgment to comply with instructions, solve problems, and the ability to solve minor technical issues without guidance Minimal/No travel required Preferred: Graduate of a welding and fabrication vocational or technical training program 12 months experience in a pipe, pressure vessel or structural welding shop Work Environment This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas. This position reports into the site every day. This position has no direct reports. Full compensation packages are based on candidate experience and certifications.Salary range$30.79-$33.14 USD Benefits With nearly 1,000 people working at Taco worldwide, each with their own story, you will discover a sense of community and diverse, intelligent colleagues who help us innovate, create and explore. Taco employees benefit from a company that: Provides competitive salaries and benefits Offers tuition reimbursement, career development, and on-site training programs in our learning center Believes in sharing profits with its employees Is mindful about family, health and well-being Fosters conditions that allow people and communities to reach their full potential Embraces and celebrates diversity #TacoComfortSolutions

Our Lynn, MA team is looking to hire a Tig Welder to perform layout, set-up and welding on a variety of aircraft engine component parts and assemblies. In this role you can expand your career welding various exotic materials into critical parts for commercial and/or military aircraft. You will receive training to achieve necessary certifications on required processes to set you up for success and ensure that you are working at required quality and efficiency levels. Job Description About GE Aerospace If you want to do work that really matters among a team of spirited and collaborative individuals, you need to know more about GE Aerospace. We've become a world leader in the design, development and manufacture of advanced aviation technologies including jet engines, components, and integrated systems for commercial and military aircraft. We're a people-first organization that will bring out your best ideas and performance as part of our on-going LEAN transformation. We believe that the world works better when it flies. Do you? If so, come aboard. Working at our Lynn Facility Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With more 2,500 employees and 1.6 million sqft of manufacturing space, we're making a huge contribution to the future of flight. And, considering that very first jet engines were born here in 1942, we clearly are the career home of people who are deeply knowledgeable about building quality engines. What's more, GE Aerospace has invested more than $100 million in our facility in the last five years alone. By engaging with highly collaborative teams, we're reaching for new Sustainable Aviation Fuel milestones every year. And by encouraging our teams to join us in extensive community service and volunteerism, we're making a difference in all the ways that matter. Here are just a few of the best reasons you will want to consider us: * Do work with a real purpose helping to solve the global challenge of how the world flies more sustainably. * Be a part of a global workforce of diverse backgrounds, perspectives, ideas, and experiences where everyone feels supported and respected. * Earn merit-based rewards and incentives. * Free Onsite Parking. * Set work schedule with no mandatory overtime. * Work in a climate-controlled building out of the elements. * Have opportunities for continuous learning and development. Qualifications/Requirements: * High School Diploma/GED * 1 year of TIG welding experience in a manufacturing environment or have successfully completed a welding co-op or course with a certified agent * Must be able to pass initial welding skills demonstration * Able to work from planning and verbal instructions, prints or sketches require the ability to read, write, and speak English. * Distance Vision 20/30 (US) using corrected or uncorrected vision in either eye * Near Vision corrected or uncorrected in either eye, shall be the ability to read Jaeger No. 2 type at 16 inches (40.64 cm) * Ability to lift, move and manipulate fixtures and component hardware up to 25 lbs. with or without reasonable accommodations * $1000 Dollar sign on bonus for qualified candidates! Desired Characteristics: * Previous welding and fabrication experience on aerospace hardware * Previous held weld certification(s) in: corrosive resistant and heat resistant ferrous alloys, nickel base alloys, cobalt-base alloys, aluminum alloys, and titanium alloys About GE Aviation Aviation is a world-leading provider of jet and turboprop engines, as well as integrated systems for commercial, military, business and general aviation aircraft. GE Aviation is advancing bold technology solutions including open fan, hybrid electric, and new engine core designs to reduce the environmental impact of flight. Also, partnering with NASA and other leaders, GE Aviation is working to accelerate the introduction of hybrid electric flight technologies for commercial aviation. For more than 100 years, GE Aviation has worked to invent the future of flight and that work continues today. The pay for this position is 26/hr. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 12/31/2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No