Welder fitter jobs in North Richland Hills, TX

Temp To Full-Time Key Responsibilities Weld Preparation: Cut, shape, and prep structural steel components so they are ready for welding and assembly. Structural Assembly: Lay out, fit, and position beams, columns, brackets, and other steel parts according to drawings or instructions. Ensure everything is square, level, and aligned using basic tools like tape measures, squares, and levels. Tack Welding: Use proper weld settings and techniques to tack pieces into place before final welds are completed. Grinding & Finishing: Grind, deburr, and clean structural steel parts to meet company quality standards. Quality Inspection: Check measurements, alignment, and overall fit-up throughout the build to ensure accuracy and safe installation. Documentation: Fill out simple forms or notes related to inspections, part numbers, or completed work as required. Tool & Equipment Care: Inspect and maintain tools, welding machines, and equipment to ensure they are safe and ready for use. Safety & Housekeeping: Follow all safety rules, use proper PPE, and help keep the work area clean and organized. Required Skills & Qualifications Ability to read and understand basic structural drawings, layouts, and instructions. Experience working with structural steel and basic welding/tack welding. Knowledge of proper fit-up, alignment, and measurement practices. Comfortable using hand tools, grinders, and measuring tools. Strong attention to detail and pride in producing quality, accurate work. Physically able to lift, carry, stand, and bend for long periods (up to 50-75 lbs). Able to work in a busy shop environment with exposure to heat, cold, dust, noise, and heavy materials. Must be able to read and write to complete basic paperwork and follow written instructions. SHIFTS AVAILABLE: 1st shift Monday-Thurs 5a-3:30p / 5am-1:30p some SAT OT. 2nd shift Monday-Thurs 4p-2:30a / Fri 2p-10:30p / Saturday 1-9p PAY: 1st shift - 21.00 2nd shift - 21.00 + 4.00 differential to 25.00

Application Deadline November 30, 2025 Department Operations Employment Type Full Time Location Fort Worth, TX Workplace type Onsite Compensation $24.00 - $27.00 / hour Reporting To Operations Manager Key Responsibilities Skills, Knowledge and Expertise Benefits About Rangeline Group Rangeline Pipeline Services provides pipeline solutions such as Line Stops, Tapping, Valve Insertion, but foremost they are known as the Concrete Pipe Specialty Team. This team of experts specializes in all aspects of concrete pressure pipe, and they have the ability to repair or replace the pipelines without interrupting the flow which helps minimize disruption to the daily life of communities, businesses and municipalities. Rangeline Pipeline Services also has a complete line of materials for concrete pipe and offers full turnkey services nationwide and 24-hr emergency services. Call Rangeline Pipeline Services today for your pipeline installation and repairs, 1-888-PCCP-HLP.

Full-time Description Experienced Commercial Mechanical Welder/Pipefitter - TIG Stainless Steel Fabrication & Hydronic Piping Greater DFW Area - $32-$38/hr | Weekly Pay | Full Benefits | Company Vehicle Are you a TIG-certified stainless-steel experienced mechanical pipefitter/welder who can fabricate/install high-end commercial kitchen systems and new-construction hydronic piping? RLP Mechanical is growing and has year-round work across the DFW metroplex. We're a respected MEP contractor looking for craftsmen who deliver precision, safety, and pride in their welds. Why Work With RLP Mechanical Top Pay: $32-$38/hr based on experience + weekly pay Full Benefits: Medical, dental, vision, life, STD/LTD 401(k) Match: You put in 6%, we put in 4% Company Truck + Gas Card Up to 20 Days PTO + Paid Holidays No Seasonal Layoffs - Steady commercial work all year What You'll Work On Mechanical TIG fabrication / welding of stainless steel for commercial kitchens, food-service equipment, and mechanical rooms Installing and fabricating hydronic piping systems (chilled water, heating hot water, condenser water) Welding, brazing, grooving, threading, soldering, and system layout Reading and interpreting blueprints, isometrics, and piping diagrams Installing pumps, heat exchangers, expansion tanks, valves, and supports Testing, flushing, and commissioning hydronic systems Leading small crews on installs (if experienced) What You Bring 4-6+ years of mechanical pipefitting experience TIG welding certification (stainless steel experience required) Experience working with stainless steel, copper, PVC, HDPE Experience with commercial kitchen installs or hydronic piping Ability to weld to code-quality standards (food service & mechanical) Foreman/lead experience is a plus - or the desire to grow into leadership Valid driver's license and ability to clear background/drug screening Who We Are RLP Mechanical provides high-quality commercial HVAC, hydronics, plumbing, and refrigeration services across the DFW area. We're built on craftsmanship, safety, and respect. Our teams stay because they get steady work, strong support, and a company that values professional tradespeople. Ready to Build Your Career With Us? If you're a skilled commercial stainless-steel TIG welder or hydronic pipefitter who takes pride in clean work and reliable installs, we want to talk. Apply today and join a company that respects your craft. #RLP123

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings. Essential Duties: * Uses the Flux Cored Arc Welding process to tack weld various small components to round or formed shafts to make a pole assembly for the welder to weld. The pole assembly generally consists of a round tube or formed shaft, baseplate, hand hole, arm mounting simplex, tenon top, vangs, step lugs, ladder clips, and/or other small parts. * Works in Large Pole department on individual fitter station to assemble pole assembly. Assist material handler in loading round tube or formed shaft on individual fitter station. * Reads and interprets drawings to determine parts needed to assemble pole assembly. Locate and gather Storeroom Personnel staged parts needed for assembly from parts staging area. Frequently pushes, pulls, and lifts up to 50 pounds. * Reads and interprets drawing to assure proper location of various small part attachments. Layout various locations on round tube or formed shaft based upon interpretation of drawings and specifications. * Uses measuring tape, level, square, and angle finders to measure distances and angles. Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses table to convert fractions to decimals and decimals to fractions. * Uses plasma torch and oxy-fuel torch to cut steel. Uses jigs made at Sabre/Texas for laying out vang slots and for cutting holes in shafts for inserting hand hole rims, arm mounting simplex, couplings, and other small parts. Wear protective goggles or welding hood to protect eyes from harmful rays. * Moves around round tube or formed shaft as necessary to get into proper position to accurately measure and assemble components described above including standing on elevated platform when necessitated by the size of the shafts. * Uses motorized grinders, motorized buffers, stone grinders, and drills to help assemble pole assembly according to prescribed specifications, codes and drawing. Wears protective face shield and safety glasses to protect eyes and face. * Adjusts welding machine to achieve desired results within parameters of established welding procedures. Changes tips, ceramic cups, and electrodes in plasma torch as needed to achieve desired cutting results. * Finish weld various products of the unit to keep the product moving through the large pole department in a timely manner. Reads and interprets weld symbols. * Uses oxy-fuel torch to preheat parts prior to welding. Read codes and specifications to determine proper temperature and uses instruments provided to measure temperature. * Uses chipping hammer, wire brush, motorized grinder, and motorized wire brush at various times to clean welded areas. * Uses pneumatic drills and magnetic drills to drill and ream various sizes holes in poles as required by the drawing. * Wears protective equipment, including safety glasses, insulated welding gloves, welding cap, leather sleeves, and/or cape, and welding hood for protection against hot metal, arc rays, grinding debris, and other potentially. * Performs visual inspecting and identifies material discrepancies to assure welds have been completed satisfactorily in compliance with applicable drawings and specifications. Uses a weld gauge to measure weld size. * When called for by the drawings and specifications, must produce full-penetration welds as defined by American Welding Society code. Uses air-arc gouger to remove weld defects, and rewelds to meet specifications. * Uses overhead crane to load finished poles into bolsters for transportation out of the pole assembly area. * Welds other products in other areas, using either Flux-Cored Arc Welding or Gas Metal Arc Welding process. * Assist and instructs other welders and fitters when needed to overcome deficiencies in quality and/or productivity. Position Requirements: * High School diploma or GED equivalent preferred * Must have knowledge of basic shop mathematics, addition, subtraction, fractions, multiplication and decimals. * Proficiency in reading complex prints and specifications. * Must know how to properly use a weld gauge. * Read and write. Physical Requirement: * Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials. * Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet. * Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times. * Must possess adequate dexterity and stamina to sustain expected production effectively. * Must be able to work in fast-paced work environment * Must be able to lift up to 50 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity

Deem Structural Services, LLC is currently seeking qualified and experienced candidates for the following positions: · Journeyman Ironworkers · Certified Welders *For the above positions you MUST have experience in Structural Steel Erection. Deem Structural Services is an AISC Advanced Certified Steel Erector with a project focus on new construction and expansion of hospitals, commercial buildings, standard office and medical office buildings, and schools. We have projects in Texas, Oklahoma, Arkansas and Louisiana. Qualified Candidates will have experience in the following: · Working at heights & in various temperatures · Erection of Buildings - Hanging Iron · Bolt-up, Connection of Structural Members · Welding · Operation of Forklift (8-10K), Boom Lift (30-80'), Scissor Lift (19-32') · Identify Safety risks and the precautions/procedures to eliminate those risks Pay commensurate with experience. Deem Structural Services is an employee-owned company that offers weekly pay, paid holidays, vacation, health, dental, vision benefits and 401k to its employees. To apply and be considered for our open positions we must receive a completed application which can be filled out online at ********************** (click "Apply). We will not accept your information over the phone.

ISCO is seeking a highly skilled and experienced Pipe Fitter/Welder (Combo-Welder) to join our team in Cedar Hill, TX. This is a fantastic opportunity to contribute to a dynamic and challenging work environment while leveraging your expertise in pipe welding techniques for the natural gas industry. ISCO is a family owned and operated company born and raised in Louisville, KY that is focused on our team members' growth. ISCO Industries is an end-to-end piping solutions provider that specializes in HDPE, working with leading edge technology that makes us a market leader, and is also ISO 9001:2015 certified. ISCO offers a standard benefits package of medical/dental/vision, and 401k with company match! Competitive salary and benefits package, opportunity for professional growth and development, challenging and rewarding work environment, and supportive and collaborative team culture. Standard 40 hours per week (Mon-Thurs 4-10's) with opportunities for overtime. All tools and PPE are provided. * WILL BE TESTED AT TIME OF INTERVIEW FOR QUALITY AND EFFICIENCY* Starting Pay Range: $26 - $32 (Depending on Experience) Responsibilities: * Execute complex pipe welding projects according to industry standards and specifications. * Maintain a strong safety record by adhering to all safety protocols and regulations. * Utilize GMAW & SMAW downhill welding effectively and efficiently. * Utilize an oxygen acetylene torch effectively and efficiently * Read and interpret blueprints and schematics to plan and execute welding tasks. * Inspect completed welds for quality and adherence to specifications. * Use of a weld positioner/turntable * Inspect material for defects, and check material specifications to record traceability requirements. * Provide guidance and support to junior welders and apprentices. * Contribute to the overall efficiency and productivity of the welding team. Qualifications: * Minimum of 3-5 years of experience in pipe fitting & welding. * Proven experience in both GMAW and SMAW welding. * Proficiency in a 12" Butt & Branch weld test is preferred. * Proficiency in reading and interpreting blueprints and schematics. * Strong understanding of welding codes and standards. * Ability to work independently and as part of a team. * Excellent problem-solving and decision-making skills. * Valid certifications (e.g., API 1104, and ASME) are a plus. * Agree to pre-employment and random drug screen and/or alcohol test as required by DOT

Get ready to grow with us! Northwest Pipe Company is the nation's leading manufacturer of water infrastructure products and with over 50 years of experience, we're just getting started! Our business is growing, and we're looking for great people to grow with us. We're immediately seeking a Fitter-Welder I to join our Northwest Pipe team in Saginaw, Texas. We Offer * Medical, Dental, Vision, Life, AD&D Insurance * Paid Vacation, Holidays, and Sick Time * 401k Retirement Savings Plan with Employer Match * Bonus Potential (2x per year) * Up to $2,500 per year Tuition Reimbursement * Safety Footwear and Eyewear Voucher (Day 1 of Employment) * Employee Assistance Program (EAP) * Opportunities for Career Advancement * Values-Driven Culture Committed to Diversity, Inclusion, and Safety Our Values * Accountability is evident when we do what we say we are going to do and people accept responsibility for their actions. We do not point fingers and blame others. We own our actions. * Commitment is not only promising to do something, but actually investing in the necessary effort and actions to make it happen. * Teamwork is essential for competing in a challenging and constantly changing business environment. Working together across all job functions is critical to achieving our success. SUMMARY OF JOB PURPOSE: Under ongoing supervision, the Fitter-Welder fits elbows and welds, cleans and grinds fabricated products. Lays out, fit and fabricate metal components to assemble structural forms while meeting all quality and safety standards. May assist in coordinating activities of welders for special welding techniques and/or procedures. ESSENTIAL FUNCTIONS AND MAJOR RESPONSIBILITIES: * Fits elbow and attachment using torch & tack welding * Lays out, positions, aligns, and fits components together * Cuts products with torch and other tools. * Gouges welds. * Grinds welds and fabricated pieces * Welds product according to plans and specifications * Completes proper documentation. * Moves pipe with overhead crane. SECONDARY RESPONSIBILITIES: Assists in the departmental housekeeping and safety efforts and works collaboratively with other members of the department and production counterparts to ensure production workflow. WORK HOURS / SHIFT * Work hours vary or change from eight to twelve hours shifts based on operational needs. * Must be able to work on Saturdays and overtime as required. SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. KNOWLEDGE, SKILLS, ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. LANGUAGE SKILLS * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to write routine reports and correspondence. MATHEMATICAL SKILLS * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. * Ability to compute rate, ratio, percent and interpret bar graphs. REASONING ABILITY * Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. * Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS AND ABILITIES * SMAW weld qualified and/or the ability to pass weld test * FCAW weld qualified and/or the ability to pass weld test * SAW weld qualified and/or the ability to pass weld test * Welding machines (wire & stick) * Grinders * Arc gouging equipment * Torches * Overhead crane * Lock-out Tag-out * Small forklift * Shear * Hand Tools EDUCATION/EXPERIENCE: * One-year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience. * On the job training by other fitters who have experience, knowledge and insight into the job. Qualified by performance. CERTIFICATES, LICENSES, REGISTRATIONS: FCAW weld qualified and/or the ability to pass weld test. Northwest Pipe Company is committed to equal employment opportunity. Veterans and individuals with disabilities are encouraged to apply. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Our organization maintains a drug-free workplace. Except where prohibited by state law, offers of employment may be contingent upon the successful completion of a background check, drug test, and/or physical examination, as determined by the essential functions and physical requirements of the position. Northwest Pipe Company reserves the right to close the position, with or without notice, if a qualified candidate is identified prior to the close date. PHYSICAL DEMANDS/WORK ENVIRONMENT: The physical demands described here are representative of those that must be meet by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Project timelines and work volume / deadlines may often require working outside of standard office hours, weekend, or evening work. Regular, reliable and predictable attendance is necessary in order to perform the essential functions of this position. Physical Activity: Over 2/3 of the time: * Standing: Remaining upright in a stationary position, particularly for sustained periods. * Grasping: Applying pressure to an object with the fingers and palm to welder or gauge * Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly, * Communicating: Expressing or exchanging ideas and information accurately in written or diagram form. * Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive detailed information through oral communication, and making fire discriminations in sounds. Up to 2/3 of the time: * Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. (This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion.) * Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. (This factor is important if the amount and kind of balancing the amount and kind of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium) * Stooping: Positions self to welding position this factor is important if it occurs to a considerable degree and requires the full use of the lower extremities and back muscles. * Pulling: Using upper extremities to exert force in order to draw drag haul or tug objects in a sustained motion. * Repetitive motions: Making substantial movements (motions) of the wrists, hand, and/or fingers such as use of micrometer meter. Less than 1/3 of the time: * Kneeling/Crouching: Position self to change welding wire * Crawling: Moving about to work on smaller on pipe. * Reaching: Grabbing things from a distance above or from the side. * Walking: Moving about accomplish tasks, particularly for long distances or moving from on work site to another. * Pushing: Using upper extremities to press against something with steady force in order to thrust forward downward or outward. * Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to position. (The factor important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles.) * Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling to use measuring devices. * Feeling Perceiving attributes of objects such as size shape temperature or texture by touching with skin particularly that of fingertips. Physical Requirements: * Medium work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently and /or up to 10 pounds of force constantly to move objects. Visual Acuity: * The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures transcribing viewing a computer terminal extensive reading visual inspection involving small defects small parts and /or operation of machines (including inspection) using measurement devices and /or assembly or fabrication of parts at distances close to the eyes. Vision Requirements: Over 2/3 of time the worker is required to have: * The worker is required to have close vision (clear vision at 20 inches or less) * The worker is required to have depth perception (three dimensional vision, ability to judge distances and spatial relationships) Up to 2/3 of the time: * The worker is required to have distance vision (clear vision at 20 feet or more) Less than 1/3 of the time * The worker is required to have color vision (ability to identify and distinguish color) * The worker is required to have peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point) * The worker is required to have the ability to adjust visual focus (ability to adjust the eye to bring an object into sharp focus) Weather Conditions: Over 2/3 of the time: * The worker is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature changes. * The worker is subject to noise: There is sufficient noise to cause the worker to shout order to be heard above the ambient noise level. Up to 2/3 of the time: * The worker is subject to extreme heat: Temperatures above 100 degrees for periods of more than (Consideration should be given to the effect of other environment conditions such as wind and humidity.) * The worker is subject to atmospheric conditions: Once or more of the following conditions that affect the respiratory system of the skin: Fumes odors dusts mists gases or poor ventilation. Less than 1/3 of the time: * The worker is subject to both environmental conditions: No activities occur inside and outside. * The worker is subject to extreme cold: Temperatures typically below 32 degrees for periods of more than one hour (Consideration should be given to the effect of other environmental conditions such as wind and humidity.) * The worker is subject to vibration: Exposure to oscillating movements of the extremities or whole body. * The worker is subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicles electrical current working on scaffolding and high places exposure to high heat or exposure to chemical. * The worker is required to wear a respirator. Noise Levels: Over 2/3 of the time: * Loud noise (examples: metal can be manufacturing department large earth-moving equipment) Up to 2/3 of the time * Very loud noise (example: jack hammer work, front row at rock concert) Supervision Received: * Close Supervision: The incumbent is assigned duties according to specified procedures and receives detailed instructions. Work is checked frequently. Personal Protective Equipment is required when in the Plant, Yard or Construction Areas: * Hard Hat * Safety Glasses * Steel-toed Boots * Hearing Protection * Reflective Vest

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Safely, efficiently and expeditiously use designated welding machines, equipment and tools; and follow established processes and procedures to assemble, prepare and fabricate vessels, as specified by job orders, and stage them for the next process. Responsibilities RESPONSIBILITIES The responsibilities described here are representative of those tasks an employee performs to successfully complete the essential functions of this job; however, this is not a comprehensive listing of all tasks that may be assigned or required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The duties include, but may not be limited to the following: Set up and operate specified welding machines, tools and equipment, with assistance from Supervisor, Lead, or support personnel. Read production orders to verify quality standards for specifications, processes and procedures. Monitor welding machine operation, performance and accuracy. Verify that vessels, materials, parts, procedures and processes conform to applicable work instructions. Follow special handling, documentation and traceability procedures for materials with Lot Tracking designations. Verify finished product meets specifications. Complete necessary documentation for welding procedure specifications, requirements and results. Assist in basic cobot set-up: fixture alignment, securing work, weld torch operation and wire feed. Maintain welding equipment and cobot peripherals: clean and replace consumables, check hoses and cables, report faults to supervisor. Use overhead crane, rollers, hoist or forklift, as necessary, to position and /or move product, as required. Assist in diagnosing vessel, materials, machinery, equipment or tool problems and resolve, as necessary. Perform preventive maintenance and calibration processes on specified machines, tools and equipment, with assistance. Follow directions and perform tasks as assigned by Lead and Supervisors. Ensure that work, staging and storage areas are safe and clean. Follow the 5S system. Operate collaborative welding robots under direction: load/unload parts, start/stop cycles, run programmed jobs, and perform basic teach/adjustments with supervision. TOOLS The tools used include, but may not be limited to: Welding machine. Hoist. Overhead crane. Forklift. Oxy. fuel cutting torch. Rollers. Pneumatic hand tools. Basic hand tools. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. Additional Qualifications/Responsibilities The requirements described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The minimum qualifications required include, but may not be limited to, the following: Six months to one year welding experience in pressure vessel shop, preferred. FCAW, MIG, SMAW welding processes, required; SAW and TIG, a plus. Ability to pass prescribed welding procedure tests in accordance with ASME Section VIII (1F fillet) Basic knowledge of reading blueprints, specifically symbols used for welding instructions, preferred. Basic knowledge of pneumatic hand tools, cutting torch, hoist, forklift and overhead crane, preferred. Basic computer literacy for simple tablet/teach pendant interactions. Ability to work in a team environment. Ability to read and interpret documents such as work instructions, safety rules, operating and maintenance instructions, and procedure manuals. Forklift operation, ability to pass an in-house certification and clean driving record, a plus. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read a standard tape measure. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Willingness to learn and adapt to new technologies (robotics, sensors, controls, etc.) EDUCATION and/or EXPERIENCE High School Diploma and/or GED. Six (6) months to one (1) year welding experience in tank or structural shop, successful completion of a technical welder training program or an equivalent combination of experience and education, preferred

experienced Structural & Pipe Welders for a growing steel manufacturing facility in the Irving, TX 75062 area. Structural Welders: $21-$22/hr Pipe Welders: $24-$25/hr Schedule: Monday-Friday, 50-60 hrs/week (OT required) Occasional Saturdays (3-4 times/year) Job Description We are seeking highly skilled Pipe and Structural Welders proficient in MIG, TIG, Fluxcore, or Stick welding. Candidates must be able to pass a 6G pipe test and Destructive/Non-Destructive testing. Essential Skills & Responsibilities Weld pipe and structural steel (1" to 48") to ASME, API, and 100% X-Ray code standards Perform welds in various positions on code materials Proficient in reading and interpreting blueprints, including layout and fit-up Cut and prep materials using flame/plasma torches, saws, grinders, and measuring tools Operate shop equipment: Iron worker Overhead crane Rigging gear Pipe threading machine Tube bending machine Pneumatic hand tools Assemble and fabricate components with minimal supervision Promote a safety-first, productive work environment Must be a team player with a positive attitude and willingness to improve processes Requirements Must pass 6G Pipe Welding Test Minimum 2-3 years of welding experience or completion of welding school High school diploma or GED Certified to weld on pipe or plate Own welding hood and steel toe boots required (not provided) Comfortable working in hot environments (fans only - no A/C) Must be willing to work mandatory overtime (50-60 hours/week) Physical Demands Frequently bend, squat, climb, stoop, twist, and reach Lift up to 25 lbs frequently, and up to 50 lbs occasionally Apply Today!

at TPG Pressure Inc Thompson Pipe Group is currently looking for a Welder ll. Pay Range: $20.00 to $25.00 + Shift pay Fluctuating Schedule Shift: between 3:00pm - 3:00am OT and Weekends as required. What We Offer: Top-tier Medical, Dental, and Vision Benefits Benefits eligibility 1st of the month following 30 days of employment Safety Shirts after 90 Day Introductory period Safety prescription eye wear program Safety work wear subsidy after 90 day introductory period Referral bonus Program Life and Supplement Life Company Matched 401K Retirement Plan Paid Holidays Training and Development Employee Discounts Career Opportunity! Who We are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all of North America. Please visit our website at ************************* This person will be responsible for the interior and exterior of every spirally welded cylinder that enters their designated station for welding defects, base metal defects, and dimensional tolerances and repairs those cylinders to meet specification requirements. Responsibilities Follow all safety rules, policies, and procedures. Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA C200 and additional job specifications as required. Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch. Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed. Performs minor maintenance and repairs to welding equipment and tools. Must properly use tools and care for equipment provided by the company to complete job tasks. Maintain workstation by keeping it clean, organized, free from clutter and trip hazards. Work under general supervision; will report to a crew leader and/or supervisor. Essential Job Functions: FCAW welder qualified to weld on Fittings and pipe and make repairs according to qualifications Follow all safety rules, policies, and procedures. Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA/ASME standards. Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch. Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed. Performs minor maintenance and repairs to welding equipment and tools. Must properly use tools and care for equipment provided by the company to complete job tasks. Maintain workstation by keeping it clean, organized, free from clutter and trip hazards. Work under general supervision; will report to a crew leader and/or supervisor. Problem Solving and Innovation: Works well alone and in groups to identify and resolve problems in a timely manner; Meets challenges with resourcefulness and generates suggestions for improving work; Exhibits sound and accurate judgment. Organizational Support: Follows all policies and procedures; Supports organization's goals and values Communication: Listens and gets clarification; Response well to questions; participates in meetings and demonstrates group discussion skills; Writes clearly and informatively; Reads and interprets written information effectively; Presents numerical data effectively. Self-Management Attendance/Dependability/Flexibility The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock There is machinery, moving equipment (cranes, bulldozers, and other moving equipment) and electrical hand tools at the job site Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.) An improperly illuminated or awkward and confining workspace Working above ground level where the possibility of falling exists (i.e. on ladders, rooftops, bucket trucks, scaffolding) Loud (examples: metal can manufacturing department, large earth-moving equipment) Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the job. While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, kneel, or crouch. The employee is repeatedly required to climb vertical ladders. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. The employee must regularly apply 75-foot-pounds of torque in the assembly, dismantling, erection, and installation of various types of structures, tank jig, scaffolding, etc. Regularly swings a 10-pound hammer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. EOE/AA - M/F/Vet/Disability Thompson Pipe Group - Pressure is an Equal Opportunity Employer Job Types: Full-time, Contract

Job DescriptionSalary: DOE Fabricator/Welder will use various techniques to cut, shape, and assemble raw steel into pre-defined structures according to blueprints, must be proficient in interpreting shop Drawings for Construction of all types of structures. Utilizing tools like cutting torches, welding machines, and other metalworking equipment to create the necessary components and assemble them into the final structure, requiringstrong mechanical skills, above average knowledge of welding techniques. Ability to work alone and with team members. Ability to stand for long periods of time. Lift or carry at least 50lbs Knowledge of AISC quality standards, Safety certifications, Forklift certifications a Plus but not required.

Job DescriptionBenefits: 401(k) matching Health insurance Seeking individual with a minimum of 5 years stainless steel MIG and TIG Welding experience. Must have high work ethic, self-motivated, follow verbal and written instructions, read blue prints, lift up to 50 pounds, use cutting torch and plasma arc for cutting stainless steel. Experience in food manufacturing or production environment. Full time 7:00 am to 4:30 pm with overtime on weekends. Have your own tools, valid drivers license, dependable transportation, arrive on time daily. Health insurance is paid after 60 days, vacation and 401k are available after employed one year. We are located border of Saginaw and Ft Worth, Texas 76179. Start date of job September 15, 2025. Serious applicants only, must have experience and willingness to work. You must be local to the area due to traffic issues. If you are not willing to show up for the interview do not apply. Welding test will be required at time of interview

Full-time Description Weld manufactured parts and sub-assemblies using various welding methods as appropriate to materials used, while following safety policies and procedures. Duties and responsibilities include but not limited to: Use jigs, fixtures, and assembly blueprints Locate positions and welds parts using TIG and MIG welding equipment as specified in blueprints Adjust welding equipment to desired amperage and wire feed Proficient with various hand tools including but not limited to, TIG welding tools, MIG welding tools, spot welding tools, stud gun, hand grinder, and drill Qualifications/Essential Functions: Able to read and understand blueprints, work instructions, travelers Adept at using small hand and power tools Good paperwork and counting skills Trouble shoot as needed Knowledge of shop measurement Able to lift up to 50 lbs., bend, sit, and stand repeatedly Able to work and interact in a “Team” oriented department Commitment to maintenance of a clean organized and safe work environment. Willingness to assist other departments as directed.

NOW HIRING MIG WELDERS MID-LEVEL TO EXPERIENCED 6-10YRS Responsibilities: · Read blueprints and drawings and take or read measurements to plan layout and procedures · Ability to set own machinery to accommodations PAY RATE $18-$22 MON-FRIDAY 6AM-2:30pm Some Saturdays may apply

Job description: Qualifications for welding position are as follows, must be fluent with flux core welding in the (vertical position), (overhead, horizontal, and flat positions) Must have 6 months to a year experience with (0.45 wire and 0.52 wire.) Need to have the ability to weld out of position. Job Type: Full-time Work Location: In person

Job Description About H&G Systems Founded in 1968 as H&G Air Conditioning & Heating, the company expanded to include electrical contracting in 1983 and became H&G Systems to reflect its diversified capabilities. From the start, our foundation has been built on trust, respect, and long-term relationships with clients, suppliers, and team members. We specialize in design-build and design-assist mechanical projects, with roughly two-thirds of our work consisting of complex, negotiated contracts. Our team is known for delivering projects on time, on budget, and with uncompromising quality. What We Offer Pay: Starting at $35.00 an hour and up, depending on experience Take-Home Vehicle: Dispatched directly from home Uniforms Provided Comprehensive Benefits Package: 401(k) with 6% company match Medical coverage: 90% of employee cost and 25% of dependent cost Dental and Vision insurance Paid Time Off (PTO) 8 paid holidays (which include half-days on Christmas Eve and New Year's Eve) Professional Growth: Access to the local ABC training facility / CEF Construction Education Foundation Tuition and book reimbursement for trade school programs (based on attendance and performance) Hands-on leadership development and mentorship We are growing and looking for Experienced Welders / Fitters to join our team! This is a great opportunity for growth and advancement in the welding trade! Primary Job Function: The Experienced Welders / Fitters will effectively and efficiently perform minor to moderately complex work on piping and duct systems in commercial and industrial environments. Required Qualifications: Valid driver's license and insurable driving record Willingness to assist with any additional and reasonable duties assigned by the supervisor Ability to read blueprints and schematics is a plus Adhere to safety policies and procedures Ability to handle physical workload Ability to perform ARC (stick) and MIG welding based on project needs 6G certification Field welding primarily involves pipe, plus a small amount of ductwork Ability to operate lifting equipment and machinery Capable of cutting and fitting pipe Stainless steel welding is a plus!

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings. Essential Duties: * Uses the Flux Cored Arc Welding process to tack weld various small components to round or formed shafts to make a pole assembly for the welder to weld. The pole assembly generally consists of a round tube or formed shaft, baseplate, hand hole, arm mounting simplex, tenon top, vangs, step lugs, ladder clips, and/or other small parts. * Works in Large Pole department on individual fitter station to assemble pole assembly. Assist material handler in loading round tube or formed shaft on individual fitter station. * Reads and interprets drawings to determine parts needed to assemble pole assembly. Locate and gather Storeroom Personnel staged parts needed for assembly from parts staging area. Frequently pushes, pulls, and lifts up to 50 pounds. * Reads and interprets drawing to assure proper location of various small part attachments. Layout various locations on round tube or formed shaft based upon interpretation of drawings and specifications. * Uses measuring tape, level, square, and angle finders to measure distances and angles. Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses table to convert fractions to decimals and decimals to fractions. * Uses plasma torch and oxy-fuel torch to cut steel. Uses jigs made at Sabre/Texas for laying out vang slots and for cutting holes in shafts for inserting hand hole rims, arm mounting simplex, couplings, and other small parts. Wear protective goggles or welding hood to protect eyes from harmful rays. * Moves around round tube or formed shaft as necessary to get into proper position to accurately measure and assemble components described above including standing on elevated platform when necessitated by the size of the shafts. * Uses motorized grinders, motorized buffers, stone grinders, and drills to help assemble pole assembly according to prescribed specifications, codes and drawing. Wears protective face shield and safety glasses to protect eyes and face. * Adjusts welding machine to achieve desired results within parameters of established welding procedures. Changes tips, ceramic cups, and electrodes in plasma torch as needed to achieve desired cutting results. * Finish weld various products of the unit to keep the product moving through the large pole department in a timely manner. Reads and interprets weld symbols. * Uses oxy-fuel torch to preheat parts prior to welding. Read codes and specifications to determine proper temperature and uses instruments provided to measure temperature. * Uses chipping hammer, wire brush, motorized grinder, and motorized wire brush at various times to clean welded areas. * Uses pneumatic drills and magnetic drills to drill and ream various sizes holes in poles as required by the drawing. * Wears protective equipment, including safety glasses, insulated welding gloves, welding cap, leather sleeves, and/or cape, and welding hood for protection against hot metal, arc rays, grinding debris, and other potentially. * Performs visual inspecting and identifies material discrepancies to assure welds have been completed satisfactorily in compliance with applicable drawings and specifications. Uses a weld gauge to measure weld size. * When called for by the drawings and specifications, must produce full-penetration welds as defined by American Welding Society code. Uses air-arc gouger to remove weld defects, and rewelds to meet specifications. * Uses overhead crane to load finished poles into bolsters for transportation out of the pole assembly area. * Welds other products in other areas, using either Flux-Cored Arc Welding or Gas Metal Arc Welding process. * Assist and instructs other welders and fitters when needed to overcome deficiencies in quality and/or productivity. Position Requirements: * High School diploma or GED equivalent preferred * Must have knowledge of basic shop mathematics, addition, subtraction, fractions, multiplication and decimals. * Proficiency in reading complex prints and specifications. * Must know how to properly use a weld gauge. * Read and write. Physical Requirement * Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials. * Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet. * Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times. * Must possess adequate dexterity and stamina to sustain expected production effectively. * Must be able to work in fast-paced work environment * Must be able to lift up to 50 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity

AtWork Personnel is seeking experienced Structural & Pipe Welders for a growing steel manufacturing facility in the Irving, TX 75062 area. Structural Welders: $21-$22/hr Pipe Welders: $24-$25/hr Schedule: Monday-Friday, 50-60 hrs/week (OT required) Occasional Saturdays (3-4 times/year) Job Description We are seeking highly skilled Pipe and Structural Welders proficient in MIG, TIG, Fluxcore, or Stick welding. Candidates must be able to pass a 6G pipe test and Destructive/Non-Destructive testing. Essential Skills & Responsibilities Weld pipe and structural steel (1" to 48") to ASME, API, and 100% X-Ray code standards Perform welds in various positions on code materials Proficient in reading and interpreting blueprints, including layout and fit-up Cut and prep materials using flame/plasma torches, saws, grinders, and measuring tools Operate shop equipment: Iron worker Overhead crane Rigging gear Pipe threading machine Tube bending machine Pneumatic hand tools Assemble and fabricate components with minimal supervision Promote a safety-first, productive work environment Must be a team player with a positive attitude and willingness to improve processes Requirements Must pass 6G Pipe Welding Test Minimum 2-3 years of welding experience or completion of welding school High school diploma or GED Certified to weld on pipe or plate Own welding hood and steel toe boots required (not provided) Comfortable working in hot environments (fans only - no A/C) Must be willing to work mandatory overtime (50-60 hours/week) Physical Demands Frequently bend, squat, climb, stoop, twist, and reach Lift up to 25 lbs frequently, and up to 50 lbs occasionally Apply Today!

Job DescriptionSalary: Fabricator/Welder will use various techniques to cut, shape, and assemble raw steel into pre-defined structures according to blueprints, must be proficient in interpreting shop Drawings for Construction of all types of structures. Utilizing tools like cutting torches, welding machines, and other metalworking equipment to create the necessary components and assemble them into the final structure, requiring strong mechanical skills, above average knowledge of welding techniques. Ability to work alone and with team members. Ability to stand for long periods of time. Lift or carry at least 50lbs Knowledge of AISC quality standards, Safety certifications, Forklift certifications a Plus but not required.