Welder fitter jobs in Plainfield, NJ

P.H. Works, Inc. is looking to hire a Welder fabricator with a great attitude. Proficient welding and fabrication skills to join metal parts according to print, sketch, or verbal instructions Ability and skill to setup and operate machine tools to cut and shape light gauge material safely and proficiently Fit-up and polishing experience Must have the ability to read and work off blueprints Ability to communicate and work well with others in a spirit of cooperation and teamwork Required: OSHA 30 & 10-Hour F60 & G60 Valid Drivers License - with minimal to no moving violations in the last 3 years We offer: • Competitive Salary • Paid Weekly • Paid Time Off • Health Benefits

1st shift: 6am-2:30pm (Mon-Fri); 2nd shift: 2:30pm-11pm (Mon-Fri) $20-28 an hour (based on previous experience and shift) Fulltime, Benefits, and Weekly Pay Impact Workforce Solutions is hiring for a Full-Time Weld Technician in Fairfield, NJ. Impact is proud to offer an industry leading benefits and wellness package, with eligibility for some programs beginning Day 1! Our positions are full-time, year-around employment with paid training. We offer: 5 Days of PTO 6 Paid Holidays Up to 50% of health insurance premiums paid by Impact Access to a retirement plan, financial fitness, and employee savings programs GENERAL PURPOSE This position requires that the employee be responsible for welding frames, legs, and other parts. DUTIES AND ACCOUNTABILITIES • Setup and operate welding machines (TIG and MIG) • Select proper jig/fixturing as needed • Weld aluminum and steel products as needed • Complete drill and grind operations as needed • Inspect welded parts and fix/correct parts out of spec • Collaborate with others on daily work and special projects • Complete clean-up responsibilities and maintain workstation according to 5S and safety protocols • Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in Safety Programs, initiatives, and investigations. • Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement JOB REQUIREMENTS Essential Knowledge, Skills and Abilities Required: • Ability to read and interpret assembly drawings, BOM's and associated procedures • Ability to use a welder • Ability to follow directions • Flexibility and willingness to adapt to frequently changing priorities/tasks and ability to multitask • Possess a mechanical aptitude • Ability to identify and communicate basic process improvements • Ability to work well in a team environment • Proven reliability - attendance and punctuality • The ability to navigate computer generated production boards and associated processes • The ability to make decisions on incomplete information • Ability to read, write and speak English fluently Minimum Education and Experience Required: • Must have a minimum of a high school diploma or GED. Preferred Qualifications: • Previous work experienced in welding is preferred. WORKING CONDITIONS/PHYSICAL DEMANDS • While performing the duties of this job, the employee is required to stand for up to 10 hours/day and make coordinated movements of the hands to grasp/manipulate objects, and to frequently stand, walk, squat/kneel, stoop/bend/twist, reach above shoulder level and below knee level, and push/pull and lift/carry up to 50 lbs. throughout the day and occasionally up to 100 lbs. as needed. Also requires coordinated movements of the fingers for using a keyboard. • Steel-toed shoes and safety glasses are required for working in this position • Warehouse environment (no air-conditioning) • Steel-toed shoes, welding mask and other supplemental PPE are required for working in this position including but not limited to weld style gloves, arm sleeves and weld jackets/aprons Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. EOE Thank you for your interest in Impact Workforce Solutions, we are proud to be an Equal Employment Opportunity Employer and participate in the E-Verify eligibility confirmation program.

General Machine Company of NJ is a fourth generation, family-owned manufacturing company in Middlesex, New Jersey, specializing in high-quality industrial blenders and dryers. We are seeking a motivated, experienced welder. As part of our team of professionals, you construct and manufacture metal parts and products, taking particular care to produce clean, polished welds. You follow blueprints, determine material measurements, and take responsibility for fabricating parts used in later assembly processes. Stainless Steel Sanitary Welding of Pipe and couplers, sheet, fittings and bracketry for Pharmaceutical Equipment. To apply, send a copy of your resume with the results from a disc assessment from ****************************** to ******************. Responsibilities/Requirements: Fabricate and manufacture metal parts for later assembly (including Carbon steel, Stainless-steel, pipe, and tubing) Follow blueprints to ensure exact specifications of output. Produce strong, clean welds. Test output to ensure strength and tolerance of welds. Must be experience in welding tools and procedures including, MIG welding, TIG welding, STICK welding, meal fabrication, grinding, and finishing metals. Polishing experience, a plus 4+ years' experience welding, preferably in a manufacturing environment. Ability to stand, crouch, and occasionally lift heavy equipment. Must maintain equipment and clean tools and work area. Must be authorized to work in the U.S. Must be located in New Jersey or within commuting distance. Please Note: GEMCO does not offer remote work, relocation assistance, or visa sponsorship. Candidates must be legally authorized to work in the U.S. and reside within commuting distance of Middlesex, NJ.

Job DescriptionDescription: Senior Welder Falcon Manufacturing, a division of NOA Brands America, Inc., is a custom fabrication facility for sheet metal, tubing, and wire components. Falcon provides economic manufacturing to large volume clients through our highly trained staff, advanced manufacturing technology, on-time delivery, and competitive pricing. Falcon is looking to add a Senior Welder to our Welding Department. Responsibilities: · Weld metal part according to blueprints specification using TIG/MIG · Inspect materials to be welded · Set up, operate and maintain equipment · Use of hand tools · Run repetitive production parts as needed. · Maintains work area · Perform other related duties or work at a different workstation as production needs require. Requirements: · Minimum 3 years of experience in manufacturing · Minimum 5 years of experience in TIG and MIG welding · High School Diploma or Equivalent · Ability to read engineering drawings and weld symbols. · Ability to read blueprints and measure parts. · Ability to meet productivity standards, completing work in timely manner · Ability to work independently and in a team environment · Ability to thrive in an evolving, fast-paced, deadline-driven environment · Ability to lift, push, or pull up to 25 lbs., occasionally up to 50 lbs. and more · Dependable · Detail oriented · Energetic and eager to learn Bonus Points: Experience in metal shop production Experience in welding aluminum/stainless steel Experience with Miller Welding Robot Basic Microsoft Office (Word, Outlook) Location: Somerset, NJ Job Type: Full-time, 1st shift Monday to Friday, from 6:00am to 2:30pm Overtime as needed Benefits · Medical/Dental/Vision Insurance · Company Paid Basic Life and AD&D Insurance · Voluntary Benefits (Supplemental Life Insurance, LegalShield, and more) · Company Paid Long-term Disability Insurance · 401K with Company Match · Paid Vacation and Sick Time · 9 Paid Holidays Pay: hourly from $22.00 to $28. 00-DOE

Job DescriptionSalary: $20-40 DOE We are seeking a skilled and reliable Welder to join our team. In this role, you will be responsible for performing welding repairs and maintenance on heavy equipment, trucks, and related machinery for a site work company. You will handle on-site and in-shop welding tasks, ensuring the safety, efficiency, and operability of our equipment. Benefits: Medical Insurance paid by Esposito Construction for single rate. 401(k) eligibility with company contribution. Dental insurance eligibility. Vision insurance eligibility. Paid time off. Pay: Flexible, experience based Key Responsibilities: Perform welding repairs and fabrication on heavy equipment (excavators, loaders, dozers) and trucks, addressing structural damages, cracks, and wear. Travel to job sites to provide on-site repairs and troubleshooting for equipment breakdowns. Collaborate with mechanics and operators to assess and identify welding needs. Utilize various welding techniques (MIG, TIG, stick welding, etc.) to repair or fabricate parts and components. Operate tools such as torches, grinders, and plasma cutters to cut and prepare metal. Inspect welds to ensure they meet safety and quality standards. Maintain welding equipment and ensure compliance with safety protocols. Read and interpret blueprints, schematics, and technical drawings to perform repairs. Assist in preventive maintenance tasks to minimize equipment downtime. Qualifications: High school diploma or GED required; technical certification in welding preferred. Proven experience as a welder, preferably working with heavy equipment and trucks. Proficiency in MIG, TIG, and stick welding, with knowledge of various metals (steel, aluminum, etc.). Ability to read and interpret technical drawings and schematics. Strong problem-solving skills and attention to detail. Willingness to travel to job sites and work in varying weather conditions. Valid drivers license required; CDL preferred but not required. Ability to lift heavy materials and work in physically demanding environments. Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Welder/Fabricator Location: Hillside, NJ (Port Newark Facility) Employment Type: Position will be full time 40 hrs. min per week, based in Port Newark, NJ. Schedule: 40+ hours per week; weekends and holidays as needed Donjon Marine, LLC, an established and expanding New Jersey-based Salvage and Diving company , is seeking an experienced, safety-driven, and reliable candidate to fill the role of a generic welder/fabricator in our Salvage Team. This is not a typical welder/fabricator position-each of our team members are also salvors . Welding and Fabrication is one of many tools used to support complex salvage operations, and not all projects involve welding/fabrication. This “dual hatted” selected individual will play a key role both offshore and shoreside , to include welding/fabrication for projects supporting salvage operations and shop work, being able to weld Primary Responsibilities Perform high-quality welding on various materials (steel, aluminum, stainless steel, etc.) using MIG, TIG, and Stick welding processes. Conduct plasma cutting and oxy-acetylene and propane torch work for fabrication, repair, and salvage operations Fabricate and repair metal components, frames, and structures for vessels, barges, and marine equipment. Welding of padeyes and lashing brackets on different floating assets to support offshore operations. Assist with marine salvage operations , including cutting, rigging, lifting, and structural recovery tasks. Work safely and effectively in challenging environments , including on the water on crane barges, docks, and offshore job sites. Operate and maintain welding, burning, and cutting equipment, ensuring all tools are in good working condition. Collaborate closely with team members during heavy lift, dive, and salvage operations. Follow all safety protocols, company procedures, and maritime regulations . Participate in the setup, mobilization, and demobilization of gear and work platforms for each project. Support other departments when necessary, including general maintenance and field fabrication tasks. Required Qualifications High school diploma / GED Valid driver's license TWIC (or ability to obtain) Minimum 2-4 years of welding experience Strong supervisory, communication, and organizational skills. Ability to travel for extended durations on domestic and international projects. Capable of lifting up to 50 lbs and working in all weather and marine conditions. Must pass pre-employment drug testing and background screening . Preferred Attributes Experience in working in the marine industry to include marine construction, vessel recovery, and wreck removal . AWS or equivalent welding certs a plus (not required) Key Competencies Strong teamwork and communication skills - able to work effectively in small crews in dynamic field conditions. Excellent problem-solving and adaptability under pressure. Physical ability to lift and move heavy materials and work in physically demanding environments. Self-motivated and reliable with a strong work ethic and positive attitude. Commitment to safety and attention to detail in all aspects of work Dependability & Adaptability Compensation and Benefits Base Salary Range: $30-$40 dollars / hr. (Actual compensation will depend on experience, education, and qualifications.) Donjon Marine offers a comprehensive benefits package that ranks among the best in the industry, including: Medical, dental, and vision coverage for employees and dependents. Wellness and employee assistance programs. Life and disability insurance. 401(k) retirement plan with company matching. Generous paid time off and holiday schedule.

The alterations fitter reports to a/the Alterations Manager. The alterations fitter is responsible for hosting a positive fitting experience for each customer and pinning the garments in accordance with Kleinfeld Bridal Customer and Fitting Standards Roles and Responsibility: The duties of the alterations fitter include but are not limited to the following: Provide courteous and pleasant service and perform tasks in accordance with Kleinfeld Bridal Customer Service and Fitting Standards Be courteous and pleasant with coworkers and supervisors Complete fittings assigned by the alterations manager Pin each garment to Kleinfeld Bridal Pinning Standards Perform the work assigned by the Alterations Manager Meet productivity standards Communicate supply needs to the Alterations Manager Ensure that the alterations office, workrooms and fitting areas are kept organized, clean and safe for all employees and customers Communicate machine or equipment repair needs to the Alterations Production Supervisor Qualifications and Education Requirements Education: Technical or Design degree, or equivalent 5 years work experience Communication: Able to communicate and read/write instructions Leadership: Able to demonstrate problem resolution skills Able to work effectively with all functions across the company, with individuals from diverse backgrounds and with staff at all levels of the organization Demonstrates ability to work flex style and work with a variety of groups including trades, creative, executives and hourly work force. Demonstrate the highest level of ethics and integrity Organizational Skills: Ability to keep workroom and space clean and organized Required Skills: Be an experienced alterations specialist, seamstress or tailor 5 years' experience Have 2 years of bridal sewing and fitting experience

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

Job Description Seeking entry level welder to learn and grow. Reports to: Welding supervisor & Manager Responsibilities: cleaning, cutting, brushing, grinding, tacking, fitting, welding, using MIG & Stick Minimum Educational Qualifications High school Diploma /GED Minimum Previous Experience 1 year experience in shop setting

Job Description We are seeking a part-time Welding Instructor who will work alongside the senior instructor, communicate well with other Instructors, and follow the curriculum and provide assistance to students receiving instruction in the Welding Lab. The (PT) welding Instructor will work under the guidance of the Industry and Trades Coordinator. Available hours Mon & Tuesday 8:30 am-2:30pm. Possibly more in fall. This is a part-time, hourly position. EXAMPLE OF DUTIES: Prep, weld, and visually inspect welds on all materials and processes. Weld, fabricate and cut, all materials, including mild, stainless, and aluminum. Guide student learning both in the classroom and welding lab. Facilitate workshop sessions as needed. Perform other duties as assigned. Qualifications: Current welding certification/completion from (AWS), Trade School, 900 hour or equivalent welder/fabricator course or 15 years documented experience. Candidate must possess knowledge of welding theory, welding code requirements, and certification mandates. Strong fundamentals and respects, follows and enforces safety protocols. Ability to work with students of diverse abilities and backgrounds in various learning settings. Be able to pass a multi process welding and cutting Evaluation. 5 years of experience in fabrication, fitting, iron work, welding, cnc, pipe, and related metal working industries civilian and military. Bend test, osha, torch and fire watch certifications, or DOT Certifications ARE required. Do not apply if you don't have a min of 3G in @ least 2 Processes. Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, Plasma, Oxy-fuel in all positions. Compensation: The hourly pay for this position is $28. Benefits: New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.) Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance. Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses. NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary: The Entry-Level B Welder is responsible for performing basic welding and repair tasks on steel waste containers and compactors. This position focuses on structural reinforcement, minor fabrication, and the restoration of worn or damaged units under supervision. The B Welder must be reliable, safety-conscious, and eager to learn and grow in a fast-paced industrial environment. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Perform MIG welding, stick welding and torch cutting on steel containers and compactors following basic repair instructions. Assist in structural repairs such as lid attachment, bottom plate patching, caster bracket welding, and frame reinforcement. Grind and clean welds to ensure proper finish and functionality. Operate hand tools and basic fabrication equipment under supervision. Support the team in container inspections and identification of weld-related defects. Adhere to all company safety policies and welding procedures. Maintain a clean and organized work area and assist in equipment maintenance. Report any material shortages, damaged equipment, or safety hazards to supervisor promptly. Document completed repairs and work performed when required. Assist senior welders or fabricators on more complex builds as needed. Requirements and Qualifications: Basic MIG welding, stick welding and torch cutting experience or completion of a welding training program. Ability to follow verbal instructions, work orders, or simple repair sketches. Understanding of basic hand and power tools used in metal repair. Physically capable of lifting heavy parts, standing, bending, and working in indoor and outdoor conditions. Strong work ethic, willingness to learn, and ability to work well with others. Commitment to safety and quality workmanship at all times. Bilingual (English/Spanish) a plus but not required. Working outdoors and in a shop environment. Exposure to welding fumes, sparks, grinding dust, noise, and heavy materials is expected. PPE including welding hood, gloves, boots, and eye protection will be provided and required at all times. Additional Information This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum USD $25.60/Hr. Salary Range Maximum USD $25.60/Hr.

**We are currently looking for entry level welders who have completed their welding certification recently and are looking to kickstart their career in welding!** + ** Candidates either having welding certs or some welding experience will ONLY be considered!** + **Candidates from Lincoln tech are most welcome!** + **Should have some knowledge about MIG/TIG welding.** + **Job location would be in Hillsborough, should have their own car to travel!** + **Candidates should be available to interview at the job location on Tuesdays/Thursdays, PLEASE KEEP YOURSELF FREE!** **Hard Skills** + Spot Welding + Hand-eye coordination **Soft Skills** + Ability to follow instructions + Coachable + Concentration + Effective communication. **Work Site** **This is a fully on-site position in Hillsborough, New Jersey.** **Job Type & Location** **This is a Contract to Hire position based out of Plainfield, NJ.** **Pay and Benefits** **The pay range for this position is $16.00 - $17.00/hr.** **Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave)** **Job Type & Location** This is a Contract to Hire position based out of Plainfield, NJ. **Pay and Benefits** The pay range for this position is $16.00 - $17.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Plainfield,NJ. **Application Deadline** This position is anticipated to close on Jan 2, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionA Commercial/Industrial Contractor is seeking a highly motivated Welder/Fabricator to work alongside our crew to ensure job is completed in a professional, neat and timely manner to meet scope of work timelines. 1. Have advanced skills in all processes and positions of welding 2. Looking for a seasoned individual with 3-5 years proven commercial/industrial experience 3. The ideal candidate will be able to read blueprints, specialize in structural commercial/industrial projects and site plans 4. The individual in this role is responsible for working with materials and equipment and possessing knowledge of job-site conditions and safety 5. The individual has the ability to work alone or alongside a crew 6. The ideal candidate should demonstrate problem solving skills 7. OSHA training, a plus 8. Willing to perform other tasks 9. Must have a valid/clean drivers license

The Container Welder/ Fabricator repairs, paints and performs maintenance to containers and roll-off boxes. PRINCIPAL RESPONSIBILITIES: + Performs repairs and maintenance on front, rear and roll-off containers + Weld steel and aluminum components using MIG and ARC welding Equipment. + Fabricates steel components using a brake and shear. + Cuts steel using a plasma cutter or torch. + Fabricates steel components for hoppers, containers and compactors. + Installs lids and wheels on containers. + Paints repaired containers. + Follows all safety policies and procedures. + Completes required paperwork. + Install company and safety decals in accordance with company standard diagram on containers and roll-off boxes. + Performs other job-related duties as assigned. + Refer more complex repairs to the Supervisor. QUALIFICATIONS: + High School Diploma or G.E.D. + Certified welder. + Advanced knowledge of mig &stick welders, plasma cutter, and airless paint Sprayers. Familiar with basic use of hand tools. + Excellent written and verbal communication skills. + Ability to follow directions with minimal supervisory involvement. MINIMUM REQUIREMENTS: + Minimum of 1 year welding experience OR COMPLETION OF A WELDING PROGRAM. **Bonus Plan Details (if applicable):** **Rewarding Compensation and Benefits** Eligible employees can elect to participate in: - Comprehensive medical benefits coverage, dental plans and vision coverage. - Health care and dependent care spending accounts. - Short- and long-term disability. - Life insurance and accidental death & dismemberment insurance. - Employee and Family Assistance Program (EAP). - Employee discount programs. - 401(k) plan with a generous company match. - Employee Stock Purchase Plan (ESPP). _The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company._ Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law. **ABOUT THE COMPANY** Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world. In 2023, Republic's total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills. Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer. Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it. Our company values guide our daily actions: + **Safe** : We protect the livelihoods of our colleagues and communities. + **Committed to Serve** : We go above and beyond to exceed our customers' expectations. + **Environmentally Responsible:** We take action to improve our environment. + **Driven** : We deliver results in the right way. + **Human-Centered:** We respect the dignity and unique potential of every person. We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. **STRATEGY** Republic Services' strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers' multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation. With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers. **Recycling and Waste** We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers' specific needs. **Environmental Solutions** Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need. **SUSTAINABILITY INNOVATION** Republic's recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth. The Republic Services Polymer Center is the nation's first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America. We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028. **RECENT RECOGNITION** + Barron's 100 Most Sustainable Companies + CDP Discloser + Dow Jones Sustainability Indices + Ethisphere's World's Most Ethical Companies + Fortune World's Most Admired Companies + Great Place to Work + Sustainability Yearbook S&P Global

Based in St. Louis, Core & Main is a leader in advancing reliable infrastructure™ with local service, nationwide . As a specialty distributor with a focus on water, wastewater, storm drainage and fire protection products and related services, Core & Main provides solutions to municipalities, private water companies and professional contractors across municipal, non-residential and residential end markets, nationwide. With over 370 locations across the U.S., the company provides its customers local expertise backed by a national supply chain. Core & Main's 5,700 associates are committed to helping their communities thrive with safe and reliable infrastructure. Visit coreandmain.com to learn more. YOU love playing a vital role in completing customer projects that can directly save lives. You enjoy working with your hands and take pride in your workmanship. You can weld various fittings to different sizes of pipe and welding joints. You have excellent attention to detail and can spot deficiencies. ARE you able to weld with manipulators, positioners, and free hand? Are you able to read CAD or hand drawings to calculate and accurately measure, cut, fit-up, and align piping for the welding of various configurations? Are you a certified Welder with experience in code welding? HERE at Core & Main, we value the individual, and the unique contributions you bring. Here we support and encourage continued learning. Here we invest in the development and well-being of our people, who are the key to our future. Here we value diversity and want to ensure each voice is heard. Here, our team members thrive as a community. Preferably, YOU have: 1+ year of welding experience Certification in pressure pipe welding HERE, we have: Medical with 100% preventative care coverage Health Savings Account Dental and Vision 401K Tuition Reimbursement and Tuition Grants Continued learning opportunities through our onsite training facility and extensive online learning catalog Professional development and industry networking opportunities, e.g. Our Women's Network and community engagement events Pay: $17.42 - $23.24 per hour Core & Main is an Equal Employment Opportunity employer. Employment at Core & Main is based solely on a person's merit and qualifications directly related to professional competence. Core & Main does not discriminate against any employee or applicant on the basis of race, creed, color, religion, national origin, nationality, ancestry, age, disability, veteran status, pregnancy or related condition (including breastfeeding), affectional or sexual orientation, gender identity or expression, marital status, status with regard to public assistance, citizenship, or any other basis protected by law. None of the questions in this application are intended to elicit information regarding any protected characteristics, nor imply any limitation, illegal preferences or discrimination based upon non-job-related information or protected characteristics. For more information, please click here or visit ********************

* Provide instruction to students in the diverse areas of welding, i.e. FCAW, MIG, TIG, Stick, brazing, flame cutting and plastic welding, hand and semi-automatic and automatic welding processes. * Utilize a variety of instructional techniques to prepare students to apply technical knowledge and skills in an entry-level position or apprenticeship. * Assess the instructional requirements of students and provide orientation and instruction in welding technology career and technical education related competencies. * Ensures that industry standards are incorporated into the educational program. * Provides training in the proper use of tools and equipment related to the welding industry; instructs students in all related safety procedures and industry protocols. Responsibilities include creating and teaching courses in your area of subject matter expertise. Class schedules may include day, evening or weekends. Qualifications - Education Minimum AS or AAS degree or industry relevant certification(s) such as journeyman or AWS credentials, with a strong work history and demonstrated subject matter expertise. Professional designations or certifications in subject matter desired. Qualifications - Experience * 2+ years of full-time, paid journeyman level experience as a welder. * Knowledge of machines and tools, including their designs, uses, repair, and maintenance. * Knowledge of current industry practice * Experience delivering training/teaching to adult learners (including corporate training) * AWS Certification preferred. Qualifications - Skills * Prefer prior post-secondary classroom teaching experience * Excellent communication skills Work Hours Class schedules may include day, evening or weekend schedules. Please specify availability.

Job Description Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Powered by JazzHR sM65VnVpr0

Department Rooms Division Employment Type Fixed Term Contract Location Global Workplace type Onsite Compensation $1,622 - $2,311 / month Key Responsibilities Skills, Knowledge & Expertise Job Benefits About Princess Cruises At Princess Cruises, we believe in creating a welcoming, inclusive, and supportive work environment for our diverse, multicultural teams, both at sea and on shore. We offer unique career opportunities that combine professional growth, adventure, and the chance to make a lasting impact on people's lives through travel. Whether you're looking to advance your hospitality career, explore the world, or work in a dynamic, high-performing environment, Princess Cruises offers: Opportunities to travel and experience new cultures. Comprehensive training and development programs. A strong focus on teamwork and personal growth. Competitive compensation and benefits. A chance to be part of a world-class brand known for excellence. Get to know us by exploring our career site. You'll learn about our history, hear first-hand what our employees love about working for Princess Cruises, and discover the passion we have for giving our guests lifetime memories. Princess Cruises is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to the applicant's age, color, race, religion, national origin, sex (including pregnancy and pregnancy related conditions), sexual orientation, gender identity or expression, disability, genetic information, or military or protected veteran status or any other characteristic protected under applicable laws. Scam Alert Protect Yourself from Recruitment Scams. Your safety and trust are important to us. Thank you for helping us maintain a secure and transparent hiring process.

We are seeking a skilled and reliable Welder to join our team. In this role, you will be responsible for performing welding repairs and maintenance on heavy equipment, trucks, and related machinery for a site work company. You will handle on-site and in-shop welding tasks, ensuring the safety, efficiency, and operability of our equipment. Benefits: Medical Insurance paid by Esposito Construction for single rate. 401(k) eligibility with company contribution. Dental insurance eligibility. Vision insurance eligibility. Paid time off. Pay: Flexible, experience based Key Responsibilities: Perform welding repairs and fabrication on heavy equipment (excavators, loaders, dozers) and trucks, addressing structural damages, cracks, and wear. Travel to job sites to provide on-site repairs and troubleshooting for equipment breakdowns. Collaborate with mechanics and operators to assess and identify welding needs. Utilize various welding techniques (MIG, TIG, stick welding, etc.) to repair or fabricate parts and components. Operate tools such as torches, grinders, and plasma cutters to cut and prepare metal. Inspect welds to ensure they meet safety and quality standards. Maintain welding equipment and ensure compliance with safety protocols. Read and interpret blueprints, schematics, and technical drawings to perform repairs. Assist in preventive maintenance tasks to minimize equipment downtime. Qualifications: High school diploma or GED required; technical certification in welding preferred. Proven experience as a welder, preferably working with heavy equipment and trucks. Proficiency in MIG, TIG, and stick welding, with knowledge of various metals (steel, aluminum, etc.). Ability to read and interpret technical drawings and schematics. Strong problem-solving skills and attention to detail. Willingness to travel to job sites and work in varying weather conditions. Valid driver's license required; CDL preferred but not required. Ability to lift heavy materials and work in physically demanding environments. Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age