Welder fitter jobs in Port Saint Lucie, FL

About Us: At Liberty Tire Recycling, we're building a sustainable future - one tire at a time. As North America's leading tire recycler, we offer a unique opportunity to make a real impact on the environment. Join our team of nearly 4,000 dedicated employees across 70+ sites and help us transform billions of pounds of waste tires into valuable resources. We're committed to innovation, a circular economy, and providing a rewarding workplace where you can grow and thrive. Job Summary: We are seeking a skilled and detail-oriented Welder to join our team. The Welder will be responsible for assembling, fabricating, and repairing metal structures and equipment using welding techniques and tools. This position requires a high level of precision, safety awareness, and the ability to read blueprints and technical drawings. The ideal candidate has experience in various welding methods and industrial maintenance skills and thrives in a fast-paced industrial or manufacturing environment. Duties and Responsibilities: • Interpret and follow blueprints, drawings, and specifications to determine welding requirements. • Perform welding tasks using appropriate techniques such as MIG, TIG, Stick (SMAW), or flux-cored arc welding (FCAW). • Inspect and ensure welds meet structural specifications and quality standards. • Set up and operate welding equipment and tools safely and efficiently. • Fabricate and assemble metal parts by cutting, shaping, and welding components. • Repair broken or cracked parts and rework defective welds as necessary. • Grind, cut, or clean welds and surfaces using power tools. • Follow all company safety protocols and OSHA regulations. • Maintain tools, equipment, and work areas in clean and orderly condition. • Collaborate with supervisors and team members to meet production goals and deadlines. • Perform other duties as assigned. Required Skills/Abilities: • Proficient in MIG, TIG, Stick, and/or flux-core welding. • Ability to read and interpret blueprints, technical drawings, and welding symbols. • Knowledge of metal properties and appropriate welding techniques. • Strong attention to detail with an emphasis on quality and precision. • Ability to use hand and power tools related to welding and metal fabrication. • Good physical condition and stamina; ability to lift 50+ pounds and work in awkward positions. • Strong safety orientation and commitment to maintaining a hazard-free environment. • Ability to work independently and as part of a team in a fast-paced setting. Education and Experience: • High school diploma or equivalent (required). • Completion of a welding certification program or technical training (preferred). • Minimum of 2 years of welding experience in a manufacturing, construction, or industrial setting (highly preferred). • Certification from the American Welding Society (AWS) or equivalent (preferred). EEO Statement: Liberty Tire Recycling is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

Aerex Industries, Inc. Pipe Fitter / Welder Job Advertisement Aerex Industries, Inc. is an ASME Code authorized steel fabrication facility possessing the “U”, “S” & “R” ASME Certificates of Authorization. Aerex Industries is actively pursuing individuals who take pride in the quality of their work, qualify by their ability to meet the job criteria and who are capable of working skillfully and safely while performing challenging tasks. Primary Duties and Responsibilities High quality welding utilizing the GTAW, GMAW & FCAW processes. Fitting and welding of component parts, equipment, piping systems and vessels as specified by procedures, detailed fabrication drawings, written work orders and verbal instruction. Operate and/or use related fabrication equipment and tools including but not limited to forklifts, hoists, overhead cranes, cutting torches, power hand tools, and measuring instruments. Read, comprehend and follow job order specifications, drawings, work instructions, and procedures. Perform and understand basic mathematical and problem solving skills. Report safety related issues and violations to management. Perform or assist with other fabrication duties as requested by management. Maintain a safe and clean working environment by complying with company policies. Discuss ideas and thoughts for improving work environment, quality and / or production with management. Job Functions: Perform job functions in the standing position as well as other physical positions as needed to accommodate restrictive weld locations. Ability to pass welder qualification test in accordance to ASME Sect. IX, AWS D1.1 and AWS D1.6 utilizing the GTAW, GMAW & FCAW processes. Flexibility to work additional hours if needed to accommodate demanding delivery schedules. Perform work in a heavy industrial environment. Ability to wear the Personal Protective Equipment (PPE) as required and including but not limited to hearing protection, safety glasses, safety boots, face shield, full welding operator protection gear and respiratory protection equipment as needed. Ability to use a variety of hand tools and devices applicable to metal, FRP and plastic fabrication. Ability to accurately read and comprehend linear and circumferential measuring equipment. Basic math skill to include addition, subtraction, multiplication and division ranging from whole numbers to fractions and decimals. Ability to utilize trigonometry for layout and fitting is a bonus. Knowledge of welding symbols, fabrication layouts and drawings. Work cohesively with coworkers and management. Reliable attendance. Perform work safely in accordance with all Company safety policies, procedures, and Personal Protective Equipment (PPE) requirements. Education and Experience High School Diploma or GED required. Five years welding experience required. Essential Qualifications Must successfully pass a welder qualification test requiring a full penetration butt groove weld on 2” -Sch. 40 stainless steel pipe in the 6G position utilizing the GTAW process. Able to pass drug screen and background check. Ability to meet the physical demands required to perform job functions. Must have dependable transportation for commute to and from work. Adept at problem-solving. Adaptable to new situations and challenges. Open to changes and new ideas. Ability to satisfactorily work alone and willingness to work with others respectfully and professionally in a team environment. Ability to communicate. Ability to apply common sense understanding to carry out written and oral instructions. Ability to handle the stress that accompanies production standards, fast pace environment and deadlines. Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself and / or others. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is continually required to talk and hear. The employee frequently is required to communicate and exchange accurate information. The employee frequently is required to walk; stand; sit; use foot/feet; use hand/foot controls; use both hands to finger, handle, feel, grip, or drive; use fine finger ability; use wrist motion; reach above/below shoulders; carry with hands and arms; step up/down, climb or balance; and bend/stoop, twist, squat/crouch, kneel, or crawl. Specific vision abilities include close vision, distant vision, color vision, peripheral vision, depth perception, ability to adjust focus, and hand-eye coordination. Primary work assignment will require employees to frequently push/pull/lift from the floor or the table, and lift from table to shoulder level, up to 45 pounds. Employees may occasionally push/pull/lift below or above shoulder level greater than 45 pounds if they are physically able to safely do it. Employees are encouraged to use caution at all times when pushing/pulling/lifting. Employees should never lift more than they are physically able to handle safely. Aerex Industries, Inc. is an equal opportunity, drug free workplace employer committed to a diverse work force and a safe and healthy work environment for all employees.

Benefits: 401(k) Bonus based on performance Health insurance Training & development We are looking for automotive welder/technicians that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility and we are looking for automotive welder/technicians with some exhaust experience to help us create an environment of success! ResponsibilitiesAs a Midas automotive technician, you'll be exposed to and have the ability to learn a wide range of skills, including: Diagnostics using state-of-the-art computer systems Tires and tire repair Car heating and air conditioning Steering and suspension Belts and hoses Radiator and engine cooling systems Batteries, starting and charging Steering and suspension Brakes and brake repair Oil changes Check engine light Welding Mufflers and exhaust services Visual safety and courtesy inspections Qualifications Ability to repair vehicles independently, while also having experience working well in a team environment Knowledge in welding, exhaust work, automotive brakes, suspension, & engine diagnostics Knowledge of, and adherence to, safety and environmental standards for repair facilities Experience using shop equipment such as lifts, tire changing equipment, alignment machines High School Diploma or equivalent - technical degree a definite plus Valid driver's license Own tools/equipment Able to service both foreign and domestic vehicles Compensation: $18.00 - $25.00 per hour Join Our Team As one of the largest destinations for automotive services, Midas is dominating the industry in developing career paths and building relationships within the communities they serve. At Midas, we take care of everything… tires, brakes, oil… so the opportunities to grow and develop expertise with Midas are endless. *************

**JOB DESCRIPTION:** : Equal Opportunity Disclaimer Alachua County Public Schools is an **EQUAL OPPORTUNITY EMPLOYER:** . Alachua County Public Schools ensures equal employment opportunities regardless of race, creed, gender, color, national origin, religion, age, sexual orientation or disability. Alachua County Public Schools has a policy of active recruitment of qualified minority teachers and non-certified employees. Any individual needing assistance in making application for any opening should contact the Department of Human Resources. **CONDITIONS OF EMPLOYMENT:** Are you a U. S. citizen or otherwise legally authorized to work in the U. S. ?Are you able to perform the essential functions of the position for which you are applying, with or without reasonable accommodations?Do you understand that any omission, incorrect or false response to any information on your application will constitute a reason for refusal to hire or dismissal?Do you authorize any and all organizations, including but not limited to current or previous employers, educational institutions, etc. , their employees, representatives, and agents to provide any and all information regarding your employment or education to the School Board of Alachua County (SBAC) its employees, representatives, and agents requesting such information? Attachments ResumeHigh School DiplomaSocial Security Card*Reference 1Reference 2OtherDrivers License*

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: We are seeking a motivated and detail-oriented Welder II for 3rd shift to join our aerospace manufacturing team. The ideal candidate will perform core welding work, ensure precision welding of aerospace components, and adhere to strict quality standards. This role offers an excellent opportunity to develop technical skills in a fast-paced, innovative environment. Location: Stuart, Florida - onsite role 3rd shift Monday to Friday from 10:00 PM to 6:30 AM. Responsibilities: Operate TIG, MIG, and other welding equipment safely and effectively. Maintain and care for welding equipment and tools, ensuring they are in proper working condition. Identify and troubleshoot welding defects and implement corrective actions. Collaborate with engineers, supervisors, and team members to optimize welding processes and production flow. Maintain accurate records of completed work and adhere to production documentation requirements. Perform precision welding on thin stainless-steel parts ranging from 0.020" to 0.125" in thickness. Read, interpret, and follow blueprints, technical drawings, and work instructions to produce components that meet exact specifications. Inspect completed welds for quality, strength, and appearance, making adjustments as necessary to ensure compliance with standards. Maintain and care for welding equipment and tools, ensuring they are in proper working condition. Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications Responsible for the manufacture and maintenance of component parts and fixtures as required Inspect completed work with a variety of measuring equipment such as height gages, micrometers, verniers, dial indicators and CNC coordinate inspection machine. Required Qualifications: High School diploma or equivalent; technical certification in welding, weld visual inspection, and/or NDT preferred. 1 year of TIG welding experience. Must be authorized to work in the U.S. on a full-time bases without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations Preferred Qualifications: 2+ years GTAW specific work experience. Sheet metal manufacturing experience. Aerospace specific work experience. Welding school or other applicable schooling Working Conditions: While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. Must be able to communicate verbally and have the ability to hear. The employee frequently is required to stand, walk, reach with hands and arms, and stoop or crouch. The employee is occasionally required to sit. The employee must regularly lift and/or move up to thirty (30) pounds and occasionally lift and/or move up to fifty (50) pounds. Specific vision abilities required by this job include close vision. Must be able to pass an eye exam on an annual basis. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Paradigm Precision specializes in the manufacturing of complex fabrication and precision machined components for gas turbine engines. We serve customers around the world in commercial and military aviation, power generation, the marine industry, rotary wing, and unmanned aerial vehicles. Summary Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques and operating various welding equipment to include robotic and CNC machines. Duties/Responsibilities Under general supervision: Operate welding equipment to fabricate and assemble materials based on job specifications. Welding processes include, but not limited to, Tig, Plasma, Fusion, Resistance, Auto, Electron-beam, and Stud. Set up welding equipment based on job specifications Maintain welding equipment Read and interpret blueprints and/or drawings to determine the specific welding requirements Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications Responsible for the manufacture and maintenance of component parts and fixtures as required Consistently maintain specific tolerances and accurately perform dimensions Check parts using specified gages or check parts using furnished fixtures to see that dimensions are being maintained. Maintain a neat and orderly work area. Adhere to all company policies and procedures. Follow all applicable safety rules and precautions. Other job related duties as assigned. Adheres to all Core Values (Health and Safety, Quality, Customer Service, Development of People, Integrity, Corporate Citizenship, Continuous Improvement, Respect). Adheres to all Core Competencies (Communication, Teamwork, Achieving Results, Commitment to Continuous Improvement, Judgement). Minimum qualifications 3 years relevant experience working with a variety of metals, including exotic metals Trade qualified with recognized apprenticeship Able to read, write, and speak in standard English Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Have working knowledge of shop geometry and trigonometry. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and blueprints. Ability to write routine reports and correspondence. Professional welding certification Preferred qualifications High School Diploma or equivalent 5+ years welding experience

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: We are seeking a motivated and detail-oriented Welder II for 3rd shift to join our aerospace manufacturing team. The ideal candidate will perform core welding work, ensure precision welding of aerospace components, and adhere to strict quality standards. This role offers an excellent opportunity to develop technical skills in a fast-paced, innovative environment. Location: Stuart, Florida - onsite role 3rd shift Monday to Friday from 10:00 PM to 6:30 AM. Responsibilities: Operate TIG, MIG, and other welding equipment safely and effectively. Maintain and care for welding equipment and tools, ensuring they are in proper working condition. Identify and troubleshoot welding defects and implement corrective actions. Collaborate with engineers, supervisors, and team members to optimize welding processes and production flow. Maintain accurate records of completed work and adhere to production documentation requirements. Perform precision welding on thin stainless-steel parts ranging from 0.020" to 0.125" in thickness. Read, interpret, and follow blueprints, technical drawings, and work instructions to produce components that meet exact specifications. Inspect completed welds for quality, strength, and appearance, making adjustments as necessary to ensure compliance with standards. Maintain and care for welding equipment and tools, ensuring they are in proper working condition. Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications Responsible for the manufacture and maintenance of component parts and fixtures as required Inspect completed work with a variety of measuring equipment such as height gages, micrometers, verniers, dial indicators and CNC coordinate inspection machine. Required Qualifications: High School diploma or equivalent; technical certification in welding, weld visual inspection, and/or NDT preferred. 1 year of TIG welding experience. Must be authorized to work in the U.S. on a full-time bases without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations Preferred Qualifications: 2+ years GTAW specific work experience. Sheet metal manufacturing experience. Aerospace specific work experience. Welding school or other applicable schooling Working Conditions: While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. Must be able to communicate verbally and have the ability to hear. The employee frequently is required to stand, walk, reach with hands and arms, and stoop or crouch. The employee is occasionally required to sit. The employee must regularly lift and/or move up to thirty (30) pounds and occasionally lift and/or move up to fifty (50) pounds. Specific vision abilities required by this job include close vision. Must be able to pass an eye exam on an annual basis. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. 3rd shift Monday to Friday from 10:00 PM to 6:30 AM.

ESSENTIAL FUNCTIONS * Welding and fabrication of elevator parts. (Predominately Aluminum TIG; occasional Steel MIG) * Fabrication of miscellaneous steel parts * Keeping track of inventory production parts * Painting, cleaning, deliveries, etc. * Occasional travel is required QUALIFICATIONS * An understanding of shop safety * Experience with Power Tool and common metal-shop tools * Mechanically inclined * Good communication skills * Ability to develop a rapport with customers and staff * Ability to follow plans and procedures and complete tasks on time * Drivers license * Clean Driving Record (Pass a DOT Physical) * 3+ years of welding experience * This position requires a person to have the ability to perform work while standing, walking, or sitting for extended periods, including up and down stairs * The ability to lift 40 pounds frequently and up to 75 pounds on an occasional basis is required * Must be able to work in a fast-paced environment * Work below the knees and above the shoulders will be required Benefits: * Dental Insurance * Disability Insurance * Health insurance * Life insurance * Vision insurance * Paid time off

Riviera Beac h Manufacturing company in business more than 50 years seeks experienced Welders with MIG and TIG experience. Chosen candidate must possess the following skills and be able to work Monday through Thursday 6:00 am 4:30 pm. Welds metal components together with a variety of arc and gas welding equipment to fabricate or repair products such as filter housings, piece parts, machine parts, and/or plant equipment. Welds metal parts together using both MIG and TIG welding processes. o Performs related tasks such as thermal cutting and grinding. o Repairs broken or cracked parts, fills holes, and increases size of metal parts. o Positions and clamps together components of fabricated metal products preparatory to welding. o Arranging components as based on blueprints and work order instructions. Welding components together in sequence following work order instructions using such tools as square, level, caliper or ruler for this task. o Clamping, holding, argon purging, tack-welding, or grinding weld components as necessary to satisfy the quality requirements and create a welded final product. o Control the processes of welding to avoid problems in relation to overheat, distortion, expansion or shrink of stainless o Maintain a clean work station and environment. o Performs preventative maintenance on equipment JOB PERFORMANCE STANDARDS: All applicants to be considered will be subject to weld test. 1. All welds must pass inspection no failures. 2. All work meets blueprint specifications. 3. Does not exceed the allowed number of absences as define in the employee manual. 4. Zero complaints from employees or customers. 5. Daily reporting with zero errors. 6. Exhibits flexibility/willingness to learn new technologies/techniques and new processes. 7. Exhibits ability to apply new processes.

Job DescriptionDescription: About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA United States, Inc. has partnered with a company in Jupiter, Florida that is a leading aftermarket service provider for multi-platform OEM gas turbine power plants worldwide. The Welding Technician welds all types of metals, designing, fabricating and repairing equipment and fixtures. Essential Functions: Set-up and installation of welding equipment Execution of welding on gas turbine components as per the required technical specification Quality check of the performed work before operation step confirmation Preparation/confirmation of the required quality documentation Reporting of used production time per production step Setting up welding parameters, selects consumable materials, and prepares work piece for new welding process trials together with engineering staff Designs and fabricates welding fixtures, chill blocks, and purge boxes as required Reporting of technical deviations with the Non-Conformance Reporting System (NCR) Carrying out scheduled and unscheduled maintenance on equipment and tools Keeping the working environment and machines in a clean and proper condition Following Environmental Health and Safety regulations Continually improving operations and the working environment Other tasks assigned by production manager or supervisor Requirements: High School Diploma or GED equivalent 3+ years of experience with TIG welding 3+ years of experience in a production or maintenance environment 1+ years of experience with welding of Ni-base or Ni-Cr alloys Experienced in carrying out visual inspections of welds Demonstrated knowledge of manufacturing processes Certified in welding (TIG & MIG) or equivalent years of experience. Must complete EHS assigned regulatory training for work area as described by PSM's EHS Training Matrix

Since 1953, Ferguson has been a source of quality supplies for a variety of industries. Together We Build Better infrastructure, better homes and better businesses. We exist to make our customers' complex projects simple, successful, and sustainable. We proactively solve problems, adapt and grow to continuously serve our customers, communities and each other. Ferguson, a Fortune 500 company, is proud to provide best-in-class products, service and capabilities across the following industries: Commercial/Mechanical, Facilities Supply, Fire and Fabrication, HVAC, Industrial, Residential Trade, Residential Building and Remodel, Waterworks and Residential Digital Commerce. Ferguson has approximately 36,000 associates across 1,700 locations. Ferguson is a community of proud associates who operate with the shared purpose of building something meaningful. You will build a career that you are proud of, at a company you can believe in. Ferguson is seeking expert Welders to fill immediate needs in our brand new semi-automatic fabrication shop. If you have pipe welding experience in the commercial or industrial HVAC industry, this is the position for you! **Position Details:** Location | **Onsite - Riviera Beach, Fl** Schedule | **Monday - Friday 7:am to 3:30pm with some occasional OT** **The pay rate for this role is $27 hourly.** **Responsibilities:** + Operate the Novarc robotic welder, training provided. + Perform specialty welding tasks; hand welding of all fittings, mechanical branch outlet nozzles, threadolets, pipe fitting fit-ups, and tack and root welding. + Inspect work for defects, dimensions, alignment, end preparations, and seam splits in pipe. + Maintain a clean and safe welding station while conforming to Ferguson's standards of quality and performance. + Reports all equipment malfunctions, safety issues, and required repairs. + Assist in all aspects of the shop when not welding such as groove assemblies, thread assemblies, hanger assemblies, etc. **Qualifications** + 3 years pipe welding / pipe fitting experience in either the commercial or industrial HVAC industry required. Graduate from technical college in pipe welding with minimum of 1 year field experience in pipe trades will also be considered. + Stick electrode welding experience required. + GMAW (Gas Metal Arc Welding) experience preferred. + TIG and MIG experience preferred. + Basic computer skills required. + Attention to detail, integrity and professionalism. + The ability to thrive in an inclusive environment. ** Must pass a welding test to complete the interview process. Must pass a pre-employment drug screen and background check. ** We are dedicated to providing meaningful benefits programs and products to our associates and their families. We offer competitive health insurance, paid time off, and more! - Ferguson complies with all wage regulations. The starting wage may be higher in certain locations based on local or state wage requirements. - _The Company is an equal opportunity employer as well as a government contractor that shall abide by the requirements of 41 CFR 60-300.5(a), which prohibits discrimination against qualified protected Veterans and the requirements of 41 CFR 60-741.5(A), which prohibits discrimination against qualified individuals on the basis of disability._ _Ferguson Enterprises, LLC. is an equal employment employer_ _F/M/Disability/Vet/Sexual_ _Orientation/Gender_ _Identity._ Equal Employment Opportunity and Reasonable Accommodation Information (******************************************************************

SUMMARY: Fits, and welds fabricated, cast, and forged components to assemble by preforming the following duties. Also, assures parts comply to drawing specifications. This will be for welding aluminum. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: * Read blueprints and drawings and take or read measurements to plan layout and procedures * Determine the appropriate welding equipment or method based on requirements * Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) * Operate angle grinders to prepare the parts that must be welded * Align components using calipers, rulers etc. and clamp pieces * Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) * Lays out, positions, aligns, and fits components together. * Bolts, clamps, and tack-welds parts to secure in position for welding. * Test and inspect welded surfaces and structure to discover flaws * Repairs products by dismantling, straightening, reshaping, and reassembling parts. * Clean work area * Maintain equipment in a condition that does not compromise safety * Other duties may be assigned. * This job has no supervisory responsibilities. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to walk, climb or balance, and talk or hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. Minimum vision of 20/40 with corrective lenses. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places; and fumes or airborne particles. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. The noise level in the work environment is usually loud. * 3+ years proven experience aluminum TIG/MIG welding * Must be able to lift 50 lbs. * Experience in using electrical or manual tools (saws, squares, calipers etc.) * Ability to read and interpret technical documents and drawings * Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.) * Deftness and attention to detail * Proficient in English * Successful completion of a relevant apprenticeship program preferred * Professional Certification (e.g. an AWS welding certificate) preferred * Knowledge of ISO-9001 QM System preferred REQUIRED COMPETENCY: To perform the job successfully, an individual should demonstrate the following competencies: * Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality. * Quantity - Meets productivity standards; completes work in timely manner; strives to increase productivity; works quickly. * Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly.

Job Description We are seeking a skilled Welder specializing in TIG welding aluminum to join our team in a cool, air-conditioned warehouse environment. The ideal candidate will have proven hands-on experience with TIG welding techniques, aluminum fabrication, and the ability to work independently with precision. This position is subcontractor-based (1099). Welder Qualifications: Must be able to TIG weld aluminum (stick welding only is not acceptable) Previous experience welding aluminum is strongly preferred Experience with aluminum fabrication (most of our work involves aluminum) Ability to read and interpret blueprints and technical drawings Strong attention to detail and precision Ability to work independently and efficiently using TIG welding techniques Physical dexterity and stamina Welder Responsibilities: TIG Welder Perform TIG welding tasks on aluminum components with accuracy and efficiency Handle and fabricate aluminum materials to exact specifications Collaborate with team members to meet project deadlines as a key Welder in our team Maintain welding equipment and tools in good working condition Follow safety guidelines and maintain a clean, organized workspace suitable for a Welder Additional Requirements for Welder Role: TIG Welder Ability to work in a warehouse environment Strong communication skills and willingness to work collaboratively Availability to work an 8-hour day shift, Monday to Friday, with occasional weekends as needed Must be available to start right away Welder Job Details: TIG Welder Welder Job Title: TIG Welder / Fabricator Welder Job Type: Full-time, Contract (1099 subcontractor) Welder Pay: $20.00 - $25.00 per hour Welder Schedule: 8-hour shift Day shift Monday to Friday Weekends as needed Welder Work Location: In-person If you are a skilled TIG Welder with aluminum experience looking for an exciting opportunity in a cool warehouse environment, we encourage you to apply. Join our team and bring your welding expertise to life!

Job Description Welder compensation range (based on experience level) $22- $37/hr Welder I($22/hr-$24/hr) · Attains familiarity with Piper QAM/QIM and FAA requirements. · Perform TIG welding of aluminum and steel parts. · Understands standards and criteria required to inspect and buying off own work using Piper inspection certifications. · Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties as assigned by supervision. Welder II($25/hr-$27/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG welding of less complex aluminum and steel parts such as tow bars and seat handles. · Inspect and buying off own work using Piper inspection certifications. · Ability to and willingness to receive and share practical knowledge, train, and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain and assist teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision. Senior Welder II($28/hr-$30/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG welding of less complex aluminum and steel parts such as Tow bars and seat handles. · Inspect and buying off own work using Piper inspection certifications. · Serves as lead with the ability to guide and willingness to receive and share practical knowledge, train, cross-train and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain, assist and train teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform audits of areas within the department as required to maintain compliance with all FAA and Piper operational requirements. Initiate related operational process or procedural corrective action, or request additional assistance from leadership or other support teams where necessary. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision Structural Welder I($28/hr-$30/hr) · Maintaining compliance with Piper QAM/QIM and Faa requirements. · Performing TIG structural welding of complex aluminum, steel, and stainless-steel welded structures including oil collector tanks and air boxes. · Inspect and buying off own and other Team Mate's work using Piper inspection certifications · Assisting in addressing departmental quality concerns to resolve them expeditiously and in a cost-effective manner. · Helping troubleshoot and re-work discrepancies as necessary directed by the Supervisor or Team lead · Providing technical assistance for other teammates & Piper's Manufacturing Support Teams. · Conducting training and cross training of teammates to attain acceptable levels of performance. · Provides assistance when required during new product development, design, build and testing. · Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties as assigned by supervision. Structural Welder II($34/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG structural welding of complex and intricate aluminum, stainless steel and steel parts including engine mounts & other aircraft assemblies. · Assisting in addressing departmental quality concerns to resolve them expeditiously and in a cost-effective manner. · Helping troubleshoot and re-work all major discrepancies as necessary. · Inspect and buying off own and other teammates work using Piper inspection certifications. · Providing technical assistance for other teammates & Piper's Manufacturing Support Teams as well as vendors, equipment suppliers, etc. when appropriate. · Conducting training and cross training of teammates to attain acceptable levels of performance. · Assisting with continuous improvement efforts to enhance the Team's performance including schedule delivery performance, reduction of late work, elimination of quality defects & scrap, productivity improvement initiatives and cost reductions. · Works with other manufacturing areas to ensure production readiness for design changes. Provides assistance when required during new product development, design, build and testing. · Ability to and willingness to receive and share practical knowledge, train, and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain and assist teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision Senior Structural Welder ($37/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG structural welding of all complex, intricate aluminum, stainless steel and steel parts · Interfacing with other departments regarding quality concerns to resolve expeditiously and in a cost-effective manner. · Troubleshooting and re-working all major discrepancies as necessary · Inspect and buying off own and other teammates work using Piper inspection certifications. · Acting as a technical liaison between teammates & Piper's Manufacturing Support Teams as well as vendors, equipment suppliers, etc. when appropriate. · Conducting or coordinating training and cross training of teammates to attain acceptable levels of performance. · Driving continuous improvement efforts to enhance the team's performance including schedule delivery performance, reduction of late work, elimination of quality defects & scrap, productivity improvement initiatives and cost reductions. Assists with data collection, review and report generation. · Working with other manufacturing areas to ensure production readiness for design changes. Provides assistance when required during new product development, design, build and testing. · Serves as lead with the ability to guide and willingness to receive and share practical knowledge, train, cross-train and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain, assist and train teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform audits of areas within the department as required to maintain compliance with all FAA and Piper operational requirements. Initiate related operational process or procedural corrective action, or request additional assistance from leadership or other support teams where necessary. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision Minimum Qualifications · High school diploma or equivalent · Successful completion welding program or 2 years' experience preferred · Related welding experience requirements: o Welder I: ≤ 2 years of experience o Welder II: 2 - 5 years of experience o Senior Welder: ≥ 5 years of experience o Structural Welder I: ≤ 2 years of experience o Structural Welder II: 2 - 5 years of experience o Senior Structural Welder: ≥ 5 years of experience · Must be able to pass required weld certification per AWS D17.1. ·

Job Description About Us: At Liberty Tire Recycling, we're building a sustainable future - one tire at a time. As North America's leading tire recycler, we offer a unique opportunity to make a real impact on the environment. Join our team of nearly 4,000 dedicated employees across 70+ sites and help us transform billions of pounds of waste tires into valuable resources. We're committed to innovation, a circular economy, and providing a rewarding workplace where you can grow and thrive. Job Summary: We are seeking a skilled and detail-oriented Welder to join our team. The Welder will be responsible for assembling, fabricating, and repairing metal structures and equipment using welding techniques and tools. This position requires a high level of precision, safety awareness, and the ability to read blueprints and technical drawings. The ideal candidate has experience in various welding methods and industrial maintenance skills and thrives in a fast-paced industrial or manufacturing environment. Duties and Responsibilities: • Interpret and follow blueprints, drawings, and specifications to determine welding requirements. • Perform welding tasks using appropriate techniques such as MIG, TIG, Stick (SMAW), or flux-cored arc welding (FCAW). • Inspect and ensure welds meet structural specifications and quality standards. • Set up and operate welding equipment and tools safely and efficiently. • Fabricate and assemble metal parts by cutting, shaping, and welding components. • Repair broken or cracked parts and rework defective welds as necessary. • Grind, cut, or clean welds and surfaces using power tools. • Follow all company safety protocols and OSHA regulations. • Maintain tools, equipment, and work areas in clean and orderly condition. • Collaborate with supervisors and team members to meet production goals and deadlines. • Perform other duties as assigned. Required Skills/Abilities: • Proficient in MIG, TIG, Stick, and/or flux-core welding. • Ability to read and interpret blueprints, technical drawings, and welding symbols. • Knowledge of metal properties and appropriate welding techniques. • Strong attention to detail with an emphasis on quality and precision. • Ability to use hand and power tools related to welding and metal fabrication. • Good physical condition and stamina; ability to lift 50+ pounds and work in awkward positions. • Strong safety orientation and commitment to maintaining a hazard-free environment. • Ability to work independently and as part of a team in a fast-paced setting. Education and Experience: • High school diploma or equivalent (required). • Completion of a welding certification program or technical training (preferred). • Minimum of 2 years of welding experience in a manufacturing, construction, or industrial setting (highly preferred). • Certification from the American Welding Society (AWS) or equivalent (preferred). EEO Statement: Liberty Tire Recycling is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: A Welder joining Pursuit Aerospace will be part of a talented group of aerospace welders who specialize in GTAW (TIG) welding. The clean and air-conditioned environment combined with using up to date Miller electric machines make for a comfortable day to day experience that is built around producing high quality aerospace engine components. You will work hand in hand with sheet metal mechanics and engineers to properly fit up and weld multiple different components. Majority of the time is spent in the weld booth but will also require some time spent working with the details prior to welding or post welding. Location: Stuart, Florida - Onsite Role. 2nd shift Monday to Friday from 3:15 PM to 11:45 PM. Responsibilities: The Primary functions of a welder I at Pursuit are, Welding on various alloys including but not limited to, Stainless, Nickle and TI. Completing Fillet and Groove welds in multiple different positions. Light sheet metal work includes fit up and correction that is directly related to welding. Working with engineers to improve processes and or development. Completing work in line with our quality system. Comfortable working in a team environment. Capable of managing the workload with minimum direction. Required Qualifications: High School diploma or equivalent; technical certification in welding, weld visual inspection, and/or NDT preferred. 1 year of TIG welding experience. Must be authorized to work in the U.S. on a full-time basis, without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: 2+ years GTAW specific work experience. Sheet metal manufacturing experience. Aerospace specific work experience. Welding school or other applicable schooling. Working Conditions: While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel. Must be able to communicate verbally and have the ability to hear. The employee frequently is required to stand, walk, reach with hands and arms, and stoop or crouch. The employee is occasionally required to sit. The employee must regularly lift and/or move up to thirty (30) pounds and occasionally lift and/or move up to fifty (50) pounds. Specific vision abilities required by this job include close vision. Must be able to pass an eye exam on an annual basis. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Monday to Friday 3:15 PM to 11:45 PM (10% Shift Differential)

Job DescriptionBenefits: 401(k) Bonus based on performance Health insurance Training & development We are looking for automotive welder/technicians that are able to work independently of others, while also being able to work collaboratively at times with peers. We have a full-service facility and we are looking for automotive welder/technicians with some exhaust experience to help us create an environment of success! Responsibilities As a Midas automotive technician, youll be exposed to and have the ability to learn a wide range of skills, including: Diagnostics using state-of-the-art computer systems Tires and tire repair Car heating and air conditioning Steering and suspension Belts and hoses Radiator and engine cooling systems Batteries, starting and charging Steering and suspension Brakes and brake repair Oil changes Check engine light Welding Mufflers and exhaust services Visual safety and courtesy inspections Qualifications Ability to repair vehicles independently, while also having experience working well in a team environment Knowledge in welding, exhaust work, automotive brakes, suspension, & engine diagnostics Knowledge of, and adherence to, safety and environmental standards for repair facilities Experience using shop equipment such as lifts, tire changing equipment, alignment machines High School Diploma or equivalent - technical degree a definite plus Valid drivers license Own tools/equipment Able to service both foreign and domestic vehicles

SUMMARY Individual brings significant steel welding and fitting experience to specialty tower manufacturing company. Positioning and connecting various steel parts by hand, use of torch, grinders, saws, drills, and related equipment is essential. Inspects and assures parts comply with drawing specifications. Excellent work environment and facility with great pay and benefits. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: * Set up equipment, cuts and welds parts using gas-shielded arc and gas cutting equipment. Cleans weld spatter and metal finishes parts as required. * Lay out, position, align, and fit components together. Bolts, clamps, fixtures, and tack-welds parts to secure in position for welding. * Repair products by dismantling, straightening, reshaping, and reassembling parts. * Operate hand drills, drill presses, hand grinders, band saw and air tools. * Unload incoming shipments delivered to their point of use at assembly. * Visually inspect outer packaging and inner contents for damage, refusing damaged goods. Count, weigh, and measure parts and materials and compare quantity, description, and part numbers to the packing slip. Deliver paperwork to the shop office. Store materials appropriately. * Clean work area. * Other duties may be assigned. REQUIRED COMPETENCY To perform the job successfully, an individual should demonstrate the following competencies: * Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality. * Quantity - Meets productivity standards; completes work in timely manner; strives to increase productivity; works quickly. * Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); Minimum three years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as blueprints, safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS AWS D1.1 PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to walk, climb, or balance, and talk or hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. Minimum vision of 20/40 with corrective lenses WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places; and fumes or airborne particles. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. The noise level in the work environment is usually loud.

We are seeking a skilled Welder specializing in TIG welding aluminum to join our team in a cool, air-conditioned warehouse environment. The ideal candidate will have proven hands-on experience with TIG welding techniques, aluminum fabrication, and the ability to work independently with precision. This position is subcontractor-based (1099). Welder Qualifications: * Must be able to TIG weld aluminum (stick welding only is not acceptable) * Previous experience welding aluminum is strongly preferred * Experience with aluminum fabrication (most of our work involves aluminum) * Ability to read and interpret blueprints and technical drawings * Strong attention to detail and precision * Ability to work independently and efficiently using TIG welding techniques * Physical dexterity and stamina Welder Responsibilities: TIG Welder * Perform TIG welding tasks on aluminum components with accuracy and efficiency * Handle and fabricate aluminum materials to exact specifications * Collaborate with team members to meet project deadlines as a key Welder in our team * Maintain welding equipment and tools in good working condition * Follow safety guidelines and maintain a clean, organized workspace suitable for a Welder Additional Requirements for Welder Role: TIG Welder * Ability to work in a warehouse environment * Strong communication skills and willingness to work collaboratively * Availability to work an 8-hour day shift, Monday to Friday, with occasional weekends as needed * Must be available to start right away Welder Job Details: TIG Welder * Welder Job Title: TIG Welder / Fabricator * Welder Job Type: Full-time, Contract (1099 subcontractor) * Welder Pay: $20.00 - $25.00 per hour * Welder Schedule: * 8-hour shift * Day shift * Monday to Friday * Weekends as needed * Welder Work Location: In-person If you are a skilled TIG Welder with aluminum experience looking for an exciting opportunity in a cool warehouse environment, we encourage you to apply. Join our team and bring your welding expertise to life!