Welder fitter jobs in San Antonio, TX - 47 jobs

Job Details ESSENTIAL JOB FUNCTIONS: Bend, form and install all tubing on units. Do tubing layout of unit in accordance with blueprints in shop packets. Identify and install valves and / or devices on unit. Some electrical knowledge needed. MARGINAL FUNCTIONS: Perform housekeeping and other duties as required PHYSICAL/MENTAL REQUIREMENTS: Lifting 50 lbs. (occasional), Standing (constant), Walking (frequently), Bending (frequently), Climbing (frequently), Crawling (occasional), Reaching (frequently), Grasping (frequently), Sitting (occasional), Connecting (frequently), Pulling (frequently), Reading Prints (frequently), Judgment (frequently). Must understand and follow safety rules, regulations, policies and procedures. Must follow written and oral instructions. Vision corrected to 20/20. Handling equipment (frequently). ENVIRONMENTAL FACTORS: Manufacturing - Exposure to noise, dirt, dust, cold/heat (indoor), cold/heat (outdoor). Job hazards of working around heavy equipment and machinery. TOOLS AND EQUIPMENT USED: Tape measure, small hand tools, power tools and drills. QUALIFICATIONS: Possess complete understanding of P&ID on electrical drawings as applicable. Use hand tools, electrical equipment and measuring tape. Ability to maintain clean and safe work area and/or equipment as required. As a condition of employment, active participation in a Continuous Improvement Team is required. The above description covers the most significant duties performed but does not exclude other occasional work assignments necessitated by business reasons which may affect production/operations to some degree. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Temp 1) Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. 2) Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints. 3) Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment. 4) Inspect, examine, and test installed systems and pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods. 5) Measure and mark pipes for cutting and threading. 6) Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints. 7) Plan pipe system layout, installation, or repair according to specifications. 8) Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications. 9) Cut and bore holes in structures, such as bulkheads, decks, walls, and mains, prior to pipe installation, using hand and power tools. 10) Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools. 11) Install automatic controls used to regulate pipe systems. 12) Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches. 13) Remove and replace worn components. 14) Prepare cost estimates for clients. 15) Inspect work sites for obstructions and to ensure that holes will not cause structural weakness. 16) Operate motorized pumps to remove water from flooded manholes, basements, or facility floors. MUST HAVE COMMERCIAL EXPERIENCE MUST HAVE ALL TOOLS MUST HAVE RELIABLE TRANSPORTATION MUST HAVE CLEAR BACKGROUND

Job Description No teaching experience required, we will provide all necessary tools and training to succeed!! We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; Modifies instructional methods and strategies to meet diverse students' needs; Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements Minimum of 3 years of industry experience preferred; Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; Certified AWS and/or NCCER. Benefits Training & Development Fun & Energetic, Family-Based Environment Continuous Growth Opportunities Medical, Dental, & Vision Options Health Savings & Flexible Spending Options (HSA & FSA) Basic Life & Accident Insurance Short & Long-term Disability 401K Retirement Plan SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Individuals will be assigned tasks based on their capabilities and will have the opportunity to gain exposure to current industrial practices and procedures in a modern workplace. Duties will include layouts, fit-ups, and weld joint completions using a variety of weld procedures in multiple environments at our client's location. Tasks will vary and may involve structural weldments, pressure vessels, construction, and field fitment of piping systems and structural components. Candidates must be able to work with a wide range of power tools, hand tools, and material-handling devices. Strong attention to detail is required, particularly with following shop drawings and ensuring accurate fit and weld dimensions as specified per project. Required Education, Knowledge, Skills, and Abilities High school diploma or equivalent required. High-level understanding of how to read and interpret shop and ISO drawings and related terminology. Ability to understand complex instructions and communicate those instructions to junior-level technicians. Ability to interact with engineering staff and train others as needed. Knowledge of piping and structural systems and the tools required for this work. Near mastery of multiple welding processes and demonstrated proficiency welding in multiple positions and situations. Must have 2 to 5 years of welding experience in pipe and/or structural work. Physical Requirements This is a physically demanding position with exposure to metal heated to melting point, noise, and outdoor elements. While lifting assistance is available, lifting, carrying, and moving large solid objects is required. Grinding dust, fumes, and flames will be present. Candidates must be able to pass an MVR. Steel-toed shoes are required. Uniforms will be provided. Work hours are Monday through Friday, 7:00 AM to 4:00 PM. Join the Cross Resource Group Team! At Cross Resource Group, we value our employees and are dedicated to providing a rewarding and inclusive work environment. We are proud to offer a competitive and comprehensive benefits package to meet the diverse needs of our team. Employee Benefits Include: Healthcare Insurance: Comprehensive coverage to ensure access to quality healthcare. Dental Insurance: Robust coverage for optimal oral health. Vision Insurance: Regular exams and corrective lenses covered. Disability Insurance: Short and long-term coverage protecting against loss of income due to illness or injury. Life Insurance: Providing financial security and peace of mind for our employees and their loved ones. Why Choose Us? Become a part of a dynamic team committed to professional growth and development. Explore our job openings and experience the rewards of being part of a company that values your health, happiness, and success.

No teaching experience required, we will provide all necessary tools and training to succeed!! We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities * Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; * Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; * Modifies instructional methods and strategies to meet diverse students' needs; * Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; * Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements * Minimum of 3 years of industry experience preferred; * Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; * Certified AWS and/or NCCER. Benefits * Training & Development * Fun & Energetic, Family-Based Environment * Continuous Growth Opportunities * Medical, Dental, & Vision Options * Health Savings & Flexible Spending Options (HSA & FSA) * Basic Life & Accident Insurance * Short & Long-term Disability * 401K Retirement Plan * SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Candidates chosen for an interview will be required to demonstrate TIG and/or MIG welding skills during the interview. High standards in TIG welding are expected due to sanitary demands of the food industry, for which we manufacture conveyor and material handling equipment. Job Title: Fabrication Welder FLSA: Non-Exempt | Job Status: Full Time Reports To: Production Supervisor PURPOSE OF POSITION Weld complex assemblies as required using TIG and some MIG welding techniques. ESSENTIAL DUTIES AND RESPONSIBILITIES The following duties are normal for this position. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. More specifically, the employee owner will: The ability to weld complex assemblies as required using TIG or MIG welding techniques. Fabricate small components as required. The safe use of various equipment I.E. Hydraulic bushing presses, drill presses, band saws, spot welders, grinders, hand tools, etc. Use and understand various paperwork, including schedules, bar code system for tracking projects, prints & tech standards. Fork lift operation. Overhead hoist and/or crane operation and safety. Perform routine housekeeping and maintenance. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Regular, consistent attendance. EDUCATION - EXPERIENCE - COMPUTER SKILLS High School diploma or general education degree (GED); or One year of related experience and/or training; or Equivalent combination of education and experience. TRAINING - CERTIFICATIONS - LICENSES Welding certificate preferred but not required. Fork lift license desired. Continually participate in additional training related to the job. COMPETENCIES To perform this position successfully, individual should demonstrate the following work competencies: Problem Solving - Identifies and resolves issues in a timely manner. Communication Skills - Speaks clearly, listens and receives clarification, respond to questions. Dependability - Follows instructions, responds to management direction, and takes responsibility. Quality Assurance - Demonstrates accuracy and thoroughness. Ethics/Professionalism - Treats people with respect; Works ethically and with integrity. PFI Organizational Support - Follows policies and procedures. Judgment - Exhibits sound and accurate judgment. Safety and Security - Observes safety and security procedures; Uses equipment properly. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee: Must be able to frequently stoop/bend. Must be able to regularly use hands and arms. Must be able to regularly stand and walk. Must be able to occasionally lift and/or move more than 100 pounds with hoist available. Must be able to regularly lift and/or move up to 50 pounds with hoist available. Specific vision abilities required by this job include close, distance, color, and peripheral vision. Specific hearing abilities required for this job include the ability to hear equipment alarms and the ability to hear instructions from others. ENVIRONMENTAL ADAPTABILITY The noise level in the work environment is usually loud. Regularly exposed to working near moving mechanical parts, fumes or airborne particles, and extreme heat (nonweather) May be exposed to the risk of electrical shock and vibration. Steel-toe safety shoes, safety glasses, hearing protection, and protective gloves. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. PFI is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, The Employer will provide reasonable accommodations to qualified individuals with disabilities and encourages prospective employees and incumbents to discuss potential accommodations with PFI.

Temp Welder - Structural & Pipe Schedule: Full-Time, Monday - Friday 7:00 am - 4:00 pm Industry: Industrial / Fabrication / Manufacturing About the Role We are seeking a skilled Welder to join our team and support a wide range of industrial projects. In this role, you will perform layout, fit-up, and welding tasks across multiple environments, gaining hands-on exposure to modern industrial practices. Work includes structural weldments, pressure vessel construction, and field fitment of piping systems and components. This is an excellent opportunity for welders looking to broaden their experience with diverse equipment and shop operations. Responsibilities Perform layout, fit-up, and weld joint completions using a variety of welding procedures. Work on structural weldments, pressure vessels, piping systems, and structural components. Operate overhead cranes, forklifts, powered hand tools, and material-handling devices. Follow shop drawings, ISO drawings, and weld symbols with strict accuracy. Perform field fitment and assist in the assembly of piping and structural systems. Communicate instructions to junior technicians and interact with engineering staff. Train in related skills as needed and support various welding and fabrication tasks. Requirements High School Diploma or equivalent (required). 2-5 years of welding experience in pipe and/or structural environments. Strong ability to read and interpret shop drawings, ISO drawings, and weld symbols. Proficiency in multiple welding processes, including multi-position welding. Ability to understand complex instructions and collaborate with engineering teams. Knowledge of piping and structural systems and related tools. Physical Requirements Ability to stand, walk, and perform physical tasks for extended periods. Work in environments with heated metals, noise, fumes, grinding dust, and outdoor exposure. Must be able to lift, carry, and move large solid objects (lifting assistance available). Why Join Us? Exposure to cutting-edge industrial welding techniques Opportunities for skill advancement and cross-training Hands-on work with a variety of equipment, tools, and fabrication tasks

Apply Description Duties and Responsibilities Cutting and joining metal parts for fabricating or repairing vehicle equipment, tools and various other articles, applying tools like stick. Designing and fabricating the equipment and parts for meeting the special or unusual needs, using the manufacturer specifications, calculator, measuring devices, drawings etc. Installing or removing any special equipment like paint machine, grinder, power and hand tools etc. Designing and creating holding jigs that aid in fabrication of the parts in various numbers. Maintaining a record of all the work completed so as to facilitate the accounting activities. Maintaining routine inventory supplies that are used for operating the welding unit via inspection of stocks and ordering fresh stock as and when required. Skills and Specifications Knowledge of the properties and characteristics of metals used for cutting, welding and forming objects and of various welding fluxes and rods. Knowledge of safety precautions related to occupational hazards, procedures and practices of the trade. Skilled in identifying the proper power and hand tools in the safest possible manner and various equipment. Skilled in operating at least some type of vehicles like trucks, motor homes etc. Education and Qualification Entry level welder fabricators are expected to pass relevant technical exams in the field. Basic mathematics skills Basic knowledge of welding symbols and blueprint reading skills. Ability to work with complicated welding tools like ox-fuel, plasma, mag-drills, chainsaws etc.

Job DescriptionDescription: Duties and Responsibilities Cutting and joining metal parts for fabricating or repairing vehicle equipment, tools and various other articles, applying tools like stick. Designing and fabricating the equipment and parts for meeting the special or unusual needs, using the manufacturer specifications, calculator, measuring devices, drawings etc. Installing or removing any special equipment like paint machine, grinder, power and hand tools etc. Designing and creating holding jigs that aid in fabrication of the parts in various numbers. Maintaining a record of all the work completed so as to facilitate the accounting activities. Maintaining routine inventory supplies that are used for operating the welding unit via inspection of stocks and ordering fresh stock as and when required. Skills and Specifications Knowledge of the properties and characteristics of metals used for cutting, welding and forming objects and of various welding fluxes and rods. Knowledge of safety precautions related to occupational hazards, procedures and practices of the trade. Skilled in identifying the proper power and hand tools in the safest possible manner and various equipment. Skilled in operating at least some type of vehicles like trucks, motor homes etc. Education and Qualification Entry level welder fabricators are expected to pass relevant technical exams in the field. Basic mathematics skills Basic knowledge of welding symbols and blueprint reading skills. Ability to work with complicated welding tools like ox-fuel, plasma, mag-drills, chainsaws etc. Requirements:

About us:Alamo NEX Construction, LLC is a part of the Ferrovial Group in Texas. In 2021, the Texas Department of Transportation (TxDOT) selected Alamo NEX Construction, LLC, a joint venture between Ferrovial Construction Texas, LLC and DBW, LLC (both Ferrovial Group subsidiaries), to complete the Interstate 35 (I-35) NEX Central Project. This project is a $1.5 billion Texas Design-Build (DB) project through the cities of San Antonio, Live Oak, Selma, and Schertz that will consist of non-tolled improvements along I-35, I-140, and Loop 1604. The proposed improvements will include the addition of elevated managed lanes to I-35, addition of 4 connector bridges at the I-35/I-410 North interchange, addition of 4 connector bridges at the I-35/Loop 1604 interchange, and widening of Loop 1604 in Bexar and Guadalupe Counties.: Job Description: Welder Schedule: Varying Schedules Position Summary: Operates welding equipment. Job Duties Cuts, lays out, fits and welds metals or alloyed metal parts to fabricate or repair equipment. Welds the joints between lengths of pipe for oil, gas or other types of pipelines. Welds structural steel girders and diaphragms. May assist in welding of permanent metal deck forms. Whatever enhances the operations of the company. Job Requirements: High School Diploma or GED is preferred but not Ability to communicate in English via verbal and written communications Heavy physical activity performing strenuous day activities of a primarily productive/technical nature Comply with all safety policies, practices and procedures. Report all unsafe activities to supervisor and/or Human Resources. Participate in proactive team efforts to achieve departmental and company goals. Provide leadership to others through example and sharing of knowledge/skill. Work outdoors with exposure to changing weather conditions such as rain, sun, snow, and wind The Statements herein are intended to describe the general nature and levels of work performed by employees, but are not a complete list of responsibilities, duties and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Alamo NEX Construction, LLC provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, gender, national origin, age, disability, or status as a Vietnam Era or special disabled veteran in accordance with applicable federal and state laws. Alamo NEX Construction, LLC complies with applicable local, state and federal laws governing nondiscrimination in employment at each location the Company operates. This policy applies to all terms and conditions of employment, including, but not limited to: hiring, placement, promotion, termination, leaves of absence, compensation, and training.

Benefits: Competitive salary Opportunity for advancement Training & development Welder's Helper - Hiring Now | Must Be Willing to Travel Company: Triple Tech Welding Pay: DOE (Hourly) Job Type: Full-Time About Us: Triple Tech Welding is a structural steel welding and erection company based in New Braunfels, TX. We specialize in high-quality fabrication and installation of structural steel components. We're looking for a hardworking and dependable Welder's Helper to join our growing team. Job Responsibilities: Assist welders in fabricating and installing structural steel. Operate basic welding and hand tools such as grinders, cutting torches, and measuring tapes. Help set up work areas, prep materials, and clean up job sites. Follow safety guidelines and assist in ensuring a safe work environment. Travel to job sites as required (out-of-town travel may be necessary). Requirements: ✅ Must be willing to travel (out-of-town jobs as needed). ✅ Valid ID & reliable transportation to job sites. ✅ Experience with basic welding and hand tools (grinders, torches, etc.). ✅ Ability to work outdoors in various conditions. ✅ Strong work ethic, ability to follow instructions, and attention to detail. ✅ Experience reading blueprints is a plus but not required. What We Offer: Hourly pay DOE Travel compensation (if applicable) Hands-on training and opportunities for growth in structural welding 🚀 Apply Today! Compensation: $15.00 - $23.00 per hour SEAA is a not-for-profit organization dedicated to the advancement of steel industry professionals. SEAA assists our members in their employee recruitment, hiring and training processes and we provide on-going safety and training support in effort to nurture success.

ESSENTIAL DUTIES AND QUALIFICATIONS: Weld components in flat, vertical, or overhead positions. Positions work pieces; clamps work pieces together or assembles them in jigs or fixtures. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Develops templates or other work aids to hold and align parts. Analyzes engineering drawings and specifications to plan layout assembly, and welding operations. Reviews layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Inspects grooves, angles, or gaps allowance, using micrometer, caliper, and precision measuring instruments. Removes rough spots, excess weld, and slag or spatter using portable grinder. Inspects finished work pieces for conformance to specifications. Manually lifting, pushing, pulling, and/or carrying objects weighing up to 50 pounds. Other duties as assigned. Regular predictable attendance. GENERAL QUALIFICATIONS MAY INCLUDE THE FOLLOWING: The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position. The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions. The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged. The ability to concentrate on a task over a period of time without being distracted. The ability to providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. The ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. The ability to see details at close range (within a few feet of the observer). Ability to follow instructions Ability to work on more than one task at a time Ability to adapt quickly to changing conditions Ability to work with minimum supervision Ability to work effectively with fellow employees Ability to perform repetitive work Maintains composure in stressful situations. Reports to work on time and as scheduled.

Who We Are Essity is a global leader in health and hygiene with our corporate headquarters in Stockholm, Sweden, and North American headquarters in Philadelphia, PA. We are a multi-billion-dollar company that is committed to breaking barriers to well-being. Essity does this through innovative brands in the areas of Professional Hygiene, Consumer Goods, and Health & Medical Solutions. Working at Essity is not just a career; it is a chance to directly make the world a healthier, more hygienic and safer place. With impactful innovations coupled with sustainable solutions, we strive to reach more people every year with the necessary and essential solutions for well-being. At Essity you will find a caring and compassionate culture where we remain grounded in our beliefs & behaviors. About the Role Essity is looking for an experienced Compression Fitter to support our Health & Medical business unit. In this role you will be responsible for accurately measuring and fitting patients for our compression products, ensuring proper fit and compression level based on their medical needs. You will also regularly be expected to provide education on the proper use and care of compression garments The ideal candidate should/could live in the Houston, TX metro, Boston, MA, Worcester, MA, Hartford, CT, or New Haven, CT areas. We're looking for people who embody our values, aren't afraid to challenge, innovate, experiment, and move at a fast pace. We're always looking for ways to improve our products and ourselves. If this is you, we'd love to talk. What You Will Do Provide custom compression garment fitting services. Conduct patient fittings and submit orders through territory partners Account for all fittings conducted and provide weekly report that reflects where fittings were conducted and garments ordered To increase overall utilization of JOBST products within a designated regional territory by attaining or exceeding established Key Performance Indicators. Achieve fit unit targets. Work with Management and Territory Team to develop strategies for growing fitting services. Build clinic level relationships with our customers who require fitting support for their patients. Who You Are 1-2 years of fitting experience with custom compression garments in the DME space preferred but not required. High School Diploma required. College degree preferred. Experience working with a field sales team and possess strong business acumen. Travel required within designated territory. Proficient in PC application skills, including Word, Excel, Power Point and Outlook. Proven organizational and interpersonal skills required as well as strong written and verbal communication skills. Valid US driver's license and clean driving record Occasional overnights required. What We Can Offer You At Essity, we believe every career is as unique as the individual and empower employees to reach their full potential in a winning culture motivated by a powerful purpose. Compensation and Benefits Competitive annual salary + variable incentive + benefits Pay offered may vary depending on multiple individualized factors such as knowledge, skills, and experience. Along with competitive pay you will be eligible for the following benefits: United Healthcare PPO / EyeMed Vision Insurance / Delta Dental Insurance Wellness program provided through Rally Healthcare and Dependent Care Flexible Spending Accounts (FSA) 401(k) with employer match and annual employer base contribution Company paid Basic Life, AD&D, short-term and long-term disability insurance PTO offering with Paid Holidays Scholarship program for children of Essity employees. Collaborative and Caring Culture | Empowerment & Engaged People | Work with Impact and A Powerful Purpose | Individual Learning & Career Growth | Health & Safety Priority | Sustainable Value Together| Innovation| Sustainable Working Life | Competitive Total Rewards Additional Information The Company is committed to equal employment opportunity and providing reasonable accommodations to qualified candidates and employees pursuant to applicable law. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, gender, sex, age, religion, creed, national origin, ancestry, citizenship, marital status, sexual orientation, physical or mental disability, medical condition, military and veteran status, gender identity or expression, genetic information, or any other characteristic protected by federal, state, or local law. If you require reasonable accommodation as part of the application process please contact ******************************* Together, we are improving lives, every day Working at Essity is not just a career; it is a chance to directly make the world a healthier, more hygienic and safer place. With impactful innovations coupled with sustainable solutions, we strive to reach more people every year with the necessary and essential solutions for well-being. Application End Date:Job Requisition ID:Essity255682

Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Essential Duties and Responsibilities: Operate safety equipment, and use safe work habits. Weld components in flat, vertical, or overhead positions. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding. Detect faulty operation of equipment and/or defective materials, and notify supervisors. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Performs other related duties as required. Educational and Other Requirements: High School diploma or equivalent preferred, but not required. Minimum one (1) year work related skill, knowledge, and hands on experience or vocational training preferred, but not required. Must stay in position for at least two (2) years depending on prior experience before promoting to Welder II. Knowledge of principles and processes for providing customer and personal services. Sensitive to confidential information. Must work independently and as a member of team. Mental and Physical Requirements: Able to read, speak and write English. Strong physical and mental health to maintain demanding workload. Able to work under stressful conditions at times. Climbing - able to go up and down stairs. Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. Able to wear common protective or safety equipment such as safety shoes, glasses, gloves, hearing protection, hard hats when needed, including welding safety equipment. Position will consistently dictate 40 - 60 hours per week with frequent overtime demands based on the workload requirements. Position will require some (6) six day weeks when workload demands, with time off scheduled per current workload and other staff availability. Strong work ethics of integrity and honesty strives for excellence in all activities employing accompanying communication. Observing, receiving, and otherwise obtaining information from all relevant sources. Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. Analyzing information and evaluating results to choose the best solution and solve problems. Resolving conflicts and other minor problems. Dependable, reliable, fulfills responsibilities. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Essential Duties and Responsibilities: * Operate safety equipment, and use safe work habits. * Weld components in flat, vertical, or overhead positions. * Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. * Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding. * Detect faulty operation of equipment and/or defective materials, and notify supervisors. * Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. * Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. * Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications. * Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. * Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. * Performs other related duties as required. Educational and Other Requirements: * High School diploma or equivalent preferred, but not required. * Minimum one (1) year work related skill, knowledge, and hands on experience or vocational training preferred, but not required. * Must stay in position for at least two (2) years depending on prior experience before promoting to Welder II. * Knowledge of principles and processes for providing customer and personal services. * Sensitive to confidential information. * Must work independently and as a member of team. Mental and Physical Requirements: * Able to read, speak and write English. * Strong physical and mental health to maintain demanding workload. * Able to work under stressful conditions at times. * Climbing - able to go up and down stairs. * Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. * Able to wear common protective or safety equipment such as safety shoes, glasses, gloves, hearing protection, hard hats when needed, including welding safety equipment. * Position will consistently dictate 40 - 60 hours per week with frequent overtime demands based on the workload requirements. * Position will require some (6) six day weeks when workload demands, with time off scheduled per current workload and other staff availability. * Strong work ethics of integrity and honesty strives for excellence in all activities employing accompanying communication. * Observing, receiving, and otherwise obtaining information from all relevant sources. * Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. * Analyzing information and evaluating results to choose the best solution and solve problems. * Resolving conflicts and other minor problems. * Dependable, reliable, fulfills responsibilities. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

The Welders Helper supports the welding team in various tasks associated with the fabrication and assembly of products. This role is ideal for individuals eager to gain hands-on experience in welding and fabrication processes while working in a dynamic environment focused on regenerative agricultural solutions. Key Responsibilities: Assist welders in preparing materials for welding by cleaning, cutting, or grinding surfaces. Help set up welding equipment and tools before each project. Support in positioning and securing workpieces for accurate welding. Follow safe operating procedures and maintain a clean and organized work area. Perform basic maintenance on welding equipment and tools. Learn and apply various welding techniques and safety practices. Operate hand tools and power tools as necessary. Assist in the inspection of completed welds for quality assurance. Participate in team meetings and training sessions to enhance skills. Requirements Qualifications: High school diploma or equivalent preferred. Previous experience in a welding shop or fabrication environment is a plus, but not required. Basic understanding of welding processes and safety practices. Ability to follow detailed instructions and guidelines. Strong attention to detail and willingness to learn. Ability to lift heavy materials and stand for long periods. Good communication skills and ability to work well in a team environment. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Training & Development

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions. Heat oxygen/propane heating torch. Perform grinding and pick up work as needed. Complete air carbon arc gouging. Properly use fillet and butt gauges. Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material. Requirements Minimum 8 years of naval/commercial welding experience. Successfully pass several tests over a three-week period. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description The Welders Helper supports the welding team in various tasks associated with the fabrication and assembly of products. This role is ideal for individuals eager to gain hands-on experience in welding and fabrication processes while working in a dynamic environment focused on regenerative agricultural solutions. Key Responsibilities: Assist welders in preparing materials for welding by cleaning, cutting, or grinding surfaces. Help set up welding equipment and tools before each project. Support in positioning and securing workpieces for accurate welding. Follow safe operating procedures and maintain a clean and organized work area. Perform basic maintenance on welding equipment and tools. Learn and apply various welding techniques and safety practices. Operate hand tools and power tools as necessary. Assist in the inspection of completed welds for quality assurance. Participate in team meetings and training sessions to enhance skills. Requirements Qualifications: High school diploma or equivalent preferred. Previous experience in a welding shop or fabrication environment is a plus, but not required. Basic understanding of welding processes and safety practices. Ability to follow detailed instructions and guidelines. Strong attention to detail and willingness to learn. Ability to lift heavy materials and stand for long periods. Good communication skills and ability to work well in a team environment. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Training & Development