TIG Welder
Welder Fitter job 39 miles from Smyrna
Summary (Position Description): Skilled Welder for fabrication ValueAdd ACP units at our facilities, while meeting all the ASME code requirements. Welders must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Must have TIG welding experience.
Reports To: Weld Supervisor
Status: Full time, Nonexempt
Duties and Task:
Basic knowledge of welding processes, such as gas metal arc and plasma arc. Basic knowledge of design techniques, tools and principals involved in production of precision technical plans, blueprints, drawings, and models.
Weld components in flat, vertical, or overhead positions. Operate manual or semi-automatic welding equipment to fuse metal segments.
Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion or expansion of material.
Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
Recognize, set up, and operate hand and power tools common to the welding trade such as GTAW (Gas Tungsten Arc Welding) and gas metal arc welding equipment.
Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches and hand tools.
Ability to read blueprints and/or drawings in addition to reading measurements in order to plan the layout and procedures.
Operate angle grinders to prepare the parts that must be welded.
Who We Are:
Bitzer Us Inc. is a leading manufacturer of key components used in commercial and industrial refrigeration and air conditioning systems. These key components include compressors, pressure vessels such as condensers and evaporators, compressor packages, and condensing units. Other products include waste heat-to-power equipment that converts excess heat to low-cost electricity.
You partner with others to get work done while gaining insight into customers' needs and deliver solutions that exceed customer expectations. You create Raving Fans. You set objectives aligning with organization and prioritize accordingly.
Conveniently located in Flowery Branch, Georgia 5 minutes off I-985 The Company is wholly owned by Bitzer SE (located in Germany), the Company is a private company and serves as Bitzer SE's flagship North American subsidiary. On a global basis, Bitzer SE has 3,900 employees at 72 sites in 38 countries, including 20 production facilities.
Competencies (Knowledge, Skills & Abilities):
Experience using a variety of welding equipment and procedures (TIG)
Experience in using electrical or manual tools (squares and calipers etc.)
Ability to read and interpret technical documents and drawings.
Knowledge of relative safety standards and willingness to use protective clothing (face-shield, FR clothing and gloves etc.)
Deftness and attention to detail.
General construction.
Mechanical amplitude.
The candidate will need to have measuring, cutting, grinding, and tool experience. Some overhead cranes are a plus.
Requirements:
TIG Welding experience
MIG Welding experience
Pulse Arc Welder experience
Work Environment:
This job is performed in the production floor/welding booth. This job requires constant use of Weld Hood and all PPE. This facility does have climate control but being a weld shop it does get hot while performing job.
Physical Demands:
While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand; walk; bend; stoop; use hands; and reach with hands and arms. May be required to lift up to 50 pounds on occasion.
Employee Benefits:
Medical Insurance (heavily subsidized by the Company)
Dental Insurance
Company paid Vision Insurance, $50,000 life insurance and Short and Long-Term Disability
2 Weeks Paid Vacation and 5 Paid Personal Days
Education Reimbursement (must be approved by manager)
401(k) Plan where it matches dollar-for-dollar up to 4% of compensation; 100% vested immediately.
Company Long Term Incentive Plan based on the profitability of the Company; 100% vested after 6 years on a graded scale).
Other Information
Please note this is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employees are required to follow any job-related instructions and to perform job-related duties requested by management. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required.
This Job Description does not imply an employment contract. BITZER US is an at-will employer.
BITZER US is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law.
Welding / Maint Technician
Welder Fitter job 38 miles from Smyrna
Major and established company with a huge majority market share in what they manufacture and a good working culture has an opportunity on the day shift for a Welding / Maintenance Technician.The Welding Technician is responsible for maintaining welding equipment and site property. Will be responsible for weld repairs to equipment and facilities in a safe, efficient manner. The location is southwest suburban Atlanta, GA. There is an attractive hourly rate. This day shift role is from 6:00 am to 4:30 pm Monday thru Thursday. OT is paid at time and 1/2. Paid weekly and an extra $1.00 an hour for perfect attendance for the week. There is also an attractive 401K with matching.
Requirements
PRINCIPAL DUTIES AND RESPONSIBILITIES: (The following duties and responsibilities are all essential job functions, as defined by the ADA, except for those that begin with the word "May.") General and other duties as assigned.
Level I
Arc Welding: Able to perform arc welding in all positions, selection of proper rod for the base material being welded, and principles of arc welding during the course of the job.
Mig Welding: Able to perform Mig welding in all positions, selection of proper wire and gases for the base material being welded. Able to weld flux core and gas. Implement the principles of Mig welding during the course of the job.
Tig Welding: Able to perform Tig welding in all positions, selection of proper rod and gases for the base material being welded, and principles of Tig welding during the course of the job.
Oxy Fuel/Plasma/Saw cutting: Implement the principles of cutting materials during the course of the job.
Fabrication: Preform with instruction and supplied prints, basic fabrication.
Safe Work Practices: Exercise safe work practices around equipment.
Level II (This level includes all Level I responsibilities)
Arc Welding: Selection, without instruction, of rods to optimize strength and performance of welds.
Mig Welding: Selection, without instruction, of wire and gases / pressures to optimize strength and performance of welds.
Tig Welding: Selection, without instruction, of rod and gases / pressures to optimize strength and performance of welds.
Oxy Fuel / Plasma cutting: Optimal torch setup, with some instruction, to maintain minimal impact to work piece.
Fabrication: Preform with minimal instruction and supplied prints, fabrication.
Safe Work Practices: Evaluate work environment to optimize safety for facilities and others in work area.
Level III (This level includes all Level I & II responsibilities)
Arc Welding: Certified Arc welding in all positions.
Mig Welding: Certified Mig welding in all positions.
Tig Welding: Certified Tig welding in all positions.
Oxy Fuel / Plasma cutting: Optimal torch setup, without instruction, to maintain minimal impact to work piece.
Fabrication: Preform without instruction and supply own prints advanced fabrication. (may include some basic machining).
Safe Work Practices: Evaluate work environment to optimize safety for facilities and others in work area.
EDUCATION/EXPERIENCE:
Should have a state certified issued by a certified welding inspector welding certification, either on file or in their possession
Level I - High school diploma or general education degree (GED), or one to two years related experience and/or training, or equivalent combination of education and experience.
Level II - High school diploma or general education degree (GED), two to four years related experience and/or training, or equivalent combination of education and experience.
Level III - Technical training certificates or associate's degree, six to eight years related experience and/or training, or equivalent combination of education and experience.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence.
Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals.
Ability to define problems, collect data, establishes facts.
PHYSICAL REQUIREMENTS: (The following statements describe the physical abilities required to perform the essential job functions, although exceptions may be made to these requirements based on the principle of reasonable accommodation.)
While performing the duties of this job, the employee is regularly required to use hands to finger, handles, or feel objects, tools, or controls and talk or hear. The employee is frequently required to stand, walk, reach with hands or arms, climb or balance, and stoop, kneel, crouch, or crawl. The employee is occasionally required to reach with hands/arms and the ability to lift up to 80 lbs.
Benefits
WORKING CONDITIONS:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually loud.
While performing the duties of this job, the employee is frequently exposed to extreme heat. The employee occasionally works in high, precarious places and in outside weather conditions, fumes or airborne particles, toxic or caustic chemicals, risk of electrical shock, and vibration.
The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time.
Welder
Welder Fitter job 11 miles from Smyrna
We are always seeking skilled welders As a welder, you will be responsible for fabricating and assembling metal structures and equipment through the use of welders, cutters, shapers, and measuring tools.
RESPONSIBILITIES
Know how to weld!
Read and interpret blueprints, sketches, or product specifications to determine sequence and methods of fabricating, assembling, and welding.
Select and set up welding equipment, tools, and supplies according to job requirements.
Perform various types of welding techniques such as MIG, TIG, arc, and oxy-acetylene welding.
Inspect workpieces to ensure conformance with specifications, using instruments such as micrometers, calipers, and gauges.
Maintain and repair all equipment used in welding to ensure proper functionality.
Follow safety protocols and maintain a clean and organized work environment.
Collaborate with engineers, fabricators, and other stakeholders to complete projects efficiently.
REQUIREMENTS
Proven experience as a welder, preferably in a manufacturing or construction environment.
Certification in welding techniques (e.g., AWS welding certification) is desirable.
Proficient in reading and interpreting blueprints and technical drawings.
Strong attention to detail and ability to work with precision.
Physical stamina and strength to lift heavy materials and work in various positions.
Excellent problem-solving skills and a proactive approach to troubleshooting.
Commitment to safety standards and practices.
QUALIFICATIONS
Vocational or technical training in welding or a related field.
Knowledge of metallurgy and welding principles.
Familiarity with welding-specific software and computer-aided design (CAD) software.
CONDITIONS
This position typically involves working in a manufacturing or construction environment.
May require working at heights or in confined spaces.
Possible travel to job sites may be required.
Welding Technician II - Non Driver
Welder Fitter job 48 miles from Smyrna
Job Title:
Weld Tech II
Dept:
Weld Production
Supervisor:
Weld Supervisor
Manager:
Production Manager
Paygrade:
H-12 Non-Driver & H-14 Driver
Job Type:
Full Time
Updated:
4/09/2022
FLSA Class:
Non-Exempt
Purpose & Description
The Weld Tech II is a member of the Welding Production team. The purpose is to weld, fabricate and assemble metal and/or aluminum structures using hand welding, flame-cutting, hand-soldering, or bracing equipment to weld or join components or to fill holes, indentations, or seams of fabricated metal products. They understand and implement personal and company safety measures by wearing specialized protective equipment.
The Weld Tech II is a skilled position who works exercising considerable independent judgement and discharging the duties with responsibility. They must possess a thorough and comprehensive knowledge of the trade, craft, or industry of welding, cutting, & fabricating metal.
Skills & knowledge
Intermediate knowledge and experience on use of specialized equipment, systems, hand tools, including power tools and techniques that is appropriate for the area(s) of specialization.
Intermediate knowledge & hands on experience with raw materials
Knowledge of how materials are used and how to control quality.
Ability to read & interpret blueprints/drawings
Ability to determine operational methods and/or sequences.
Ability to safely operate Forklift and Lull equipment.
Intermediate knowledge of tool and equipment repair and troubleshooting operating errors.
Intermediate knowledge of safety guidelines and safety equipment usage.
Intermediate to advanced welding and fabricating metal abilities.
Ability to operate firefighting equipment.
Understand safety rules and wears safety protection and equipment.
Tasks & Activities
Set up, operate, and maintain welding and/or cutting equipment.
Weld components in flat, vertical, or overhead positions.
Operate safety equipment and use safe work habits.
Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance.
Recognize, set up, operate hand, and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Weld separately or in combination, using aluminum, stainless steel, cast iron, or other alloys.
Select and install torches, torch tips, filler rods, and flux, according to welding chart specs.
Select the correct types and thicknesses of metals.
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Connect and turn regulator vales to activate and/or adjust.
Determine required equipment and welding methods, applying knowledge of welding techniques.
Monitor the fitting, burning, and welding processes.
Mark or tag material with proper job number, piece marks and other marks as required.
Chip, grind off excess weld, slag or spatter using hand scrapers or power tools.
Prepare all material surfaces to be welded.
Align and clamp workpieces together using rules, squares, hand tools, jigs, or vises.
Report faulty equipment to direct supervisor or lead.
Set up and use ladders and scaffolding, as necessary.
Grind, cut, buff or bend edges or workpieces to be joined. Hammer out bulges or bends.
Judgement & Problem Solving
Must always maintain a calm, respectful manner, and attitude.
Never use disrespectful, foul, profane language. Must always use modest and decent language and/or gestures.
Opportunity to make decisions without supervision, including decisions to meet strict deadlines.
Opportunity to make decisions that affect other people, the financial resources, and or the image and reputation of the organization.
Physical Requirements/Environment & work setting
Requires standing, sitting, bending, and repetitive motion.
Requires hands to handle, control, or feel objects, tools, or controls.
Requires lifting/moving a min. of 50 lbs. throughout an entire work shift. Excellent stamina is required.
Required to speak and listen.
Requires wearing proper safety and protective equipment when applicable.
Requires contact and/or face-to-face discussions.
Includes exposure to sounds and noise levels that are distracting or uncomfortable.
Exposure to chemicals, hazardous equipment, minor burns, cuts, bites, or stings.
Requires working indoors and outdoors in an uncontrolled environment.
Requires completion of Safety and First Aid Training and ongoing safety provided by MDI.
Education & Experience
Requires at least 2 (two) years of on-the-job training or any combination of education and experience.
Requires at least 6 months of welding aluminum and/or pass an onsite weld test scoring at least 80% proficiency.
DISCLAIMERS
The job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.
We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.
Welder & Fabricator
Welder Fitter job 9 miles from Smyrna
ALL Crane Rental of Georgia, Inc. Austell, GA (30168) ALL Crane Rental of Georgia, Inc. is seeking a metal Welder & Fabricator SMAW. This is a full-time, non-exempt position with comprehensive benefits package. Essential Functions * Read blueprints and drawings and take or read measurements to layout
* Set up components to be welded based on requirements
* Operate grinders, torches plasma cutters, shears and other welding related tools
* Be able to read a tape measure
* Weld components utilizing SMAW processes
* Maintain conformity to safety requirements and other regulations
* Operate telescopic and regular forklifts (training will be included)
* Other duties as assigned
Skills and Requirements
* Must be qualified under Section 4 of American Welding Society D1.1 Structural Steel Code or equivalent code for Overhead (4G) and Vertical (3G) or all positions, SMAW
* Strong initiative required; ability to work independently with minimal direct supervision
* Ability to work safely around moving machinery
* Ability to work in conditions with marked changes in temperature & humidity
* Ability to withstand exposure to dust, fumes, and gases
* Able to lift up to 50 lbs
Manufacturer's training will be an integral part of this position. Applicant must be willing to learn new techniques, follow safety guidelines as they evolve in our industry, and remain certified within the various portions of our field.
Benefits
* Competitive wages.
* Paid Time Off and Holidays.
* Comprehensive Benefits Plans (Medical, Dental, Life and Disability Insurance).
* 401(k) retirement plan with company match.
ALL Crane Family of Companies
The ALL Family of Companies and its affiliated branches are Equal Opportunity Employers with competitive wage and benefits packages in a drug-free environment. The ALL Family of Companies is the largest privately-owned crane rental and sales enterprise in North America, with 29 strategically located branches operating under the ALL, Central, Dawes, and Jeffers names - including specialized divisions for aerial lifts, boom trucks (ALT Sales), and parts. Since 1964, the ALL Family has been a leader in the lift industry - with market strengths that include commercial construction, roads & bridges, power generation, plants & processing, facility maintenance, and more. We're ALL you need
The ALL Family of Companies is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity.
Welder & Fabricator
Welder Fitter job 9 miles from Smyrna
ALL Crane Rental of Georgia, Inc.
Austell, GA (30168)
ALL Crane Rental of Georgia, Inc. is seeking a metal Welder & Fabricator SMAW. This is a full-time, non-exempt position with comprehensive benefits package.
Essential Functions
Read blueprints and drawings and take or read measurements to layout
Set up components to be welded based on requirements
Operate grinders, torches plasma cutters, shears and other welding related tools
Be able to read a tape measure
Weld components utilizing SMAW processes
Maintain conformity to safety requirements and other regulations
Operate telescopic and regular forklifts (training will be included)
Other duties as assigned
Skills and Requirements
Must be qualified under Section 4 of American Welding Society D1.1 Structural Steel Code or equivalent code for Overhead (4G) and Vertical (3G) or all positions, SMAW
Strong initiative required; ability to work independently with minimal direct supervision
Ability to work safely around moving machinery
Ability to work in conditions with marked changes in temperature & humidity
Ability to withstand exposure to dust, fumes, and gases
Able to lift up to 50 lbs
Manufacturer's training will be an integral part of this position. Applicant must be willing to learn new techniques, follow safety guidelines as they evolve in our industry, and remain certified within the various portions of our field.
Benefits
Competitive wages.
Paid Time Off and Holidays.
Comprehensive Benefits Plans (Medical, Dental, Life and Disability Insurance).
401(k) retirement plan with company match.
ALL Crane Family of Companies
The ALL Family of Companies and its affiliated branches are Equal Opportunity Employers with competitive wage and benefits packages in a drug-free environment. The ALL Family of Companies is the largest privately-owned crane rental and sales enterprise in North America, with 29 strategically located branches operating under the ALL, Central, Dawes, and Jeffers names - including specialized divisions for aerial lifts, boom trucks (ALT Sales), and parts. Since 1964, the ALL Family has been a leader in the lift industry - with market strengths that include commercial construction, roads & bridges, power generation, plants & processing, facility maintenance, and more. We're ALL you need
The ALL Family of Companies is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity.
Welder
Welder Fitter job 38 miles from Smyrna
Responsibilities Brasfield & Gorrie is currently accepting applications for a Welder. Below are the main responsibilities for this position. ) * Use hand welding and flame-cutting equipment to weld together metal components and parts or to cut, trim, or scarf metal objects to dimensions, as specified by layouts, work orders, or blueprints
* Must adhere to safety protocol, and work in a drug-free environment
Education - Skills - Knowledge - Qualifications & Experience
* 3 years Commercial Construction Welder experience preferred
* Must be able to lift up to 50 lbs
EOE/Vets/Disabilities
Welder/Millwright - 100% Travel
Welder Fitter job 31 miles from Smyrna
Job Description
Job Summary: Industrial Access is currently seeking experienced Welders/Millwrights to join our growing team! Work with highly skilled crews on projects nationwide while enjoying steady, long-term work and advance your skills in the Industrial Construction industry. Crews are typically mobilized for 3-6 weeks at a time and average 60-84 hours/week during deployments at client sites nationwide. We pay all Travel Expenses AND Overtime (see details below)!
Responsibilities:
Projects may include rigging and climbing, hydro-blasting, NDT inspections, masonry and concrete repairs, painting/coatings, insulation, welding and electrical work. As an Industrial Access Welder/Millwright, you will:
Perform welding, fabrication, torch cutting, plasma cutting, and fitting.
Handle rigging, climbing, and work at heights and in confined spaces.
Engage in general maintenance, hydro-blasting, inspections, masonry and concrete repairs, painting/coatings, electrical work, insulation, and more.
Work in industrial outage/shutdown environments across various job sites nationwide.
Travel to project sites for extended periods of time, typically 3-6 weeks at a time.
Ideal candidates will have experience with any of the following:
Inspections and assessments, Welding – Structural, Painting & Coatings, Steel Fabrication, FRP Maintenance, Demolition, Electrical, Concrete, Masonry, NDT – Non-Destructive Testing, Insulation & Lagging, UAV/Drone – FAA Licensed, AWL – Aviation Warning Light Systems, LPS – Lightning Protection Systems, Scaffolding – Fixed & Suspended, Rope Access – SPRAT/IRATA, Millwright, Rigging & Hoisting, Heavy Equipment Operation, Engineering
Required skills and experience:
Current or previous certification in 6G Stick & Mig welding (carbon steel/stainless steel)
Proficient in torch cutting and fabrication
Strong mechanical aptitude and capable of reading drawing submittals
Experience installing/maintaining/repairing equipment
Comfortable with a variety of power tools.
MUST be comfortable working at height and within confined spaces
Good physical strength and stamina – capable of lifting/carrying up to 75lbs.
Able to work in extreme weather conditions
Must pass pre-employment and random drug screening
Must pass Federal background check
Candidates must have a valid driver’s license and a clean MVR
What’s in it for YOU?
W2 Employment with starting pay at $28-32/hr based on skills, experience and certifications
Comprehensive benefits package for eligible employees
401K + matching
Health, Dental, Vision, PTO, Holiday Pay and more
Steady work and overtime (1.5x hourly rate) pay for any hours over 8 in a day or 40 in a week.
Travel and lodging paid by Industrial Access + food per diem
Single bunk hotel rooms
Travel, training and shop rate is 70% of hourly rate.
Tools and equipment furnished by Industrial Access
Continuing Education and Training available
Advancement and career growth opportunities
Industrial Access is a multi-craft services provider specializing in “limited access” solutions. We help our clients maintain hard-to-reach stacks, ductwork, vessels, cooling towers and other structures, utilizing rope access and other high-elevation work techniques. We regularly work with concrete, masonry, steel and fiberglass reinforced plastic (FRP), and carbon fiber for the power generation, pulp and paper, cement and heavy industrial and manufacturing sectors. Find out more at ************************
Welder
Welder Fitter job 11 miles from Smyrna
The GEMÜ Group is a global leader in the manufacturing of valves and control systems, with over 50 years of innovation and quality. As a privately-owned company, GEMÜ is known for combining advanced technology with strong traditions. With more than 2,400 employees worldwide, we are growing fast-and we're looking for great people to grow with us.
We are currently hiring a TIG Welder for our manufacturing team in Atlanta, Georgia. We're looking for someone experienced in welding, especially TIG, who takes pride in precision and quality. This role is hands-on and plays a key part in producing high-quality metal components.
Key Responsibilities
Weld stainless steel and other metals using TIG techniques to meet quality standards.
Prepare materials and set up equipment for each job.
Inspect welds for accuracy, cleanliness, and strength.
Read blueprints and follow welding symbols.
Follow all safety rules and use required protective equipment.
Keep welding tools and equipment in good working condition.
Work with the production team to meet deadlines and improve workflows.
Suggest improvements to make processes more efficient.
Help test new welding methods when needed.
Perform other duties as assigned.
Knowledge & Skills
Strong attention to detail and accuracy in welding.
Problem-solving skills for welding issues.
Ability to work well with others in a team.
Willingness to learn and adapt to changes.
Good communication with team leads and coworkers.
Able to read ASME welding procedures and blueprints.
Comfortable using hand tools and shop equipment safely.
Basic computer skills.
Qualifications
High school diploma or equivalent; trade school or apprenticeship preferred.
3+ years of TIG welding experience, preferably in manufacturing.
Able to read blueprints and use various welding methods (TIG, MIG, Stick).
Welding certification is a plus but not required.
Physically able to stand, lift, and work in factory conditions.
Must be able to handle equipment safely.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
2nd shift Mig Welder! $24.25 per hour!!
Welder Fitter job 48 miles from Smyrna
Mig Welder - 2nd shift
Gainesville, Ga
Axiom Staffing Group is seeking experienced Mig Welders for a large manufacturing facility in Gainesville, Ga. Overtime and weekends may be required! 6pm start time until finish, typically 10-12 hour days, $24.25 per hour! Will be required to take a mig welding test upon interviewing.
Mig Welder Responsibilities:
Perform various welding techniques, including mig welding, to join metal components
Load/unload welding robots
Use power tools and hand tools to cut, shape, and weld metal pieces
Operate cranes and other equipment to move heavy materials
Inspect welds for quality and make necessary repairs or adjustments
Collaborate with team members to ensure efficient production processes
Follow safety protocols and maintain a clean work environment
Mig Welder Requirements:
1+ years Mig Welding experience in a manufacturing setting
Ability to operate power tools and other equipment safely
Strong attention to detail and precision in welding techniques
Tank Builder / Welder (Nationwide)
Welder Fitter job 11 miles from Smyrna
Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications.
We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems.
Statement of Purpose
To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities.
The PTS difference:
Our people are our #1 priority.
Teamwork is the best way to solve problems.
Safety is critical. Everyone is responsible for creating a safe work environment.
We strive to find new and better ways of doing things every day.
Clear expectations and directions are always given.
Frequent coaching and support lead to great performers and high quality for our customers.
A manager's job is to set each employee up for success every day.
We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together.
We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment.
Day to Day Duties:
Performing arc and torch cutting and gouging.
Using generators, compressors, tuggers, blowers, grinders, and other power and air tools.
Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor).
Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment.
Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment.
Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations.
Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment.
Operating forklifts, man lifts, boom lifts, and other large lifting equipment.
Knowledge of crane operations (including rigging and signaling)
Reading detailed erection and fabrication drawings.
Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks.
Completing job safety analysis, safety audits, site-specific training, and other safety training.
Follow directions and work professionally with other crew members.
Other duties as assigned.
Requirements
Have great communication and organization skills.
The ability to solve problems and suggest improvements to our systems.
Have excellent attendance and show up to work on time every day.
The willingness to learn.
Be at least 18 years old.
Be able to lift 50 lbs.
Have a high school diploma or equivalent.
Be eligible to work in the United States.
Be willing to authorize background checks.
Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism.
Have a valid driver's license.
Be willing to authorize motor vehicle driving record checks.
Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing.
Ability to weld is a plus.
Benefits:
Competitive Pay with annual reviews
Health, Dental and Vision insurance
401k with company match
Great culture of teamwork, learning and development.
You'll be part of a team where YOU matter
Rig Welder III
Welder Fitter job 14 miles from Smyrna
Responsibilities
Selects type and size of pipe or other related materials and equipment according to specifications.
Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques.
May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes.
Lays out, positions, aligns and fits components together in various body positions.
Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together.
Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor.
Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun.
Starts power supply to produce electric current.
Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece.
Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle.
May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes.
Examines weld for bead size and other specifications.
Capable of setting weld machine parameters and maintain weld machine in working condition.
Loads, transports and unloads material, tools, equipment and supplies.
May assist in lifting, positioning and securing of materials and work pieces during installation.
Performs minor maintenance or cleaning activities of tools and equipment.
Assists other mechanics as needed.
Respiratory protection is common and may be required.
Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in.
Responsible for observing and complying with all safety and project rules. Performs other duties as required.
Use effective verbal and written communication skills.
Be capable of listening and communicating with other supervision and employees.
Be motivated and work safely and productively.
Understand and respond accordingly to all safety alerts, warnings, hazards, etc.
Qualifications
Journeyman with 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently.
Tig Welder
Welder Fitter job 31 miles from Smyrna
Job Title: Welder Location: Cumming, GA Join the American BOA Team! At American BOA, we're not just manufacturers; we're innovators in flexible metal products, specializing in high-performance solutions like metal bellows expansion joints, exhaust systems, and flexible metal hoses that serve diverse industries. If you're passionate about welding and want to be part of a company that's shaping the future of metal fabrication, we want to hear from you!
Your Role
As a skilled Welder at American BOA, you'll be at the heart of our operations, crafting high-quality metal components that are crucial to our groundbreaking products. With your expertise in TIG welding, you'll help us push the boundaries of metal fabrication while ensuring our products meet the highest standards of quality.
What You'll Do
* Execute TIG welding operations on a variety of metal components, translating engineering drawings and specifications into top-notch welds.
* Set up and fine-tune welding equipment, choosing the right parameters to achieve optimal penetration and fusion.
* Decode blueprints, sketches, and technical drawings to identify welding needs and dimensions.
* Inspect welds meticulously for quality assurance using visual checks and measuring instruments.
* Safely and efficiently operate welding machinery and hand tools, strictly adhering to all safety protocols.
* Keep your workspace organized and clean, ensuring proper handling and storage of welding materials and tools.
* Collaborate with a talented team across departments to meet production targets and tackle any welding challenges that arise.
* Engage in ongoing training and improvement initiatives to elevate your welding skills and stay ahead in the industry.
* Uphold company policies and quality standards, ensuring compliance with regulations and exceeding customer expectations.
* Foster a positive work environment by exemplifying professionalism, teamwork, and a relentless pursuit of excellence.
* Take on additional tasks as needed to support our dynamic team!
What You Bring
* High school diploma or equivalent.
* Proven experience as a Welder, showcasing your TIG welding expertise.
* Welding certification (e.g., AWS, ASME) is a plus!
* Strong ability to read and interpret engineering drawings, blueprints, and welding symbols.
* Exceptional attention to detail and a commitment to quality craftsmanship.
* Excellent hand-eye coordination and manual dexterity.
* Ability to work both independently and collaboratively as part of a team.
* Basic math skills and a solid understanding of measurements.
* Physical stamina for repetitive tasks and the capability to lift heavy objects.
* A strong commitment to safety, with knowledge of welding hazards and best practices.
Why Join Us?
Be part of a vibrant team at American BOA, dedicated to delivering innovative solutions and superior quality products. We offer competitive compensation, comprehensive benefits, and pathways for career advancement. If you're ready to take your welding career to the next level, apply now and become a valued member of our welding team!
Note: We are an ITAR-compliant location. Must be a U.S. Person as defined by ITAR. You can expect a TIG weld test as part of the interview process.
Job Type: Full-time
Pay: $18.00 - $25.00 per hour
Shift:
* Day shift
* Evening shift
* Night shift
Experience:
* TIG welding: 3 years (Required)
Ability to Commute:
* Cumming, GA 30040 (Preferred)
Ability to Relocate:
* Cumming, GA 30040: Relocate before starting work (Preferred)
Work Location: In person
Welder II 1st shift
Welder Fitter job 30 miles from Smyrna
Your activities Works from drawings, sketches, templates, SI, or verbal instructions. Selects proper fixtures, and parts in accordance with SO requirements. Allows for the effect of heat to produce true, warp and leak-free joints. Performs basic equipment adjustments based on material variations.
Takes necessary precautions to eliminate the possibilities of fire or "flash" exposure to others in the area.
Keeps up with the production schedule.
Welds 2" systems or larger for all pressure ranges.
Performs ancillary duties as needed.
Your profile
2-3 years previous work experience in related field
Technical welding training preferred
Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent.
Manual dexterity required for operating machinery and computers.
Ability to lift up to 30 pounds required.
The ability to stand for long periods up to eight or more hours at a time
Able to work in noisy environment.
Good eyesight (eyesight correction acceptable).
Be able to work overtime if required. (including weekends)
Preform Welder
Welder Fitter job 34 miles from Smyrna
Permanent Creating foldable displays, advancing medical innovations, or giving new life to precious metals - at Heraeus, we empower our customers to stay ahead of the curve. As a family-owned global technology leader, we take pride in being the invisible force driving innovation. Whether in production, research, sales, or administration, we deliver world-class quality across key industries: Metals & Recycling, Healthcare, Semiconductor & Electronics, and Industrials. With a strong global presence, including a significant footprint in the United States, Heraeus employs approximately 16,400 people across 40 countries, all dedicated to shaping the future of technology and industry.
Heraeus Quartz North America has an immediate openeing for a skilled preform welder to join our production team in Buford, GA. This position is for 2nd (M-F 2pm-10pm) or 3rd (S-T 10pm - 6am) shift. The primary responsibility of this position is to weld handles to quartz preforms, and to tip preforms.
You Role and Responsibilities:
* Heat quartz solid on a lathe and 'weld' (butt) the ends together to form a handle.
* Load lathe with preform, align preform with handle, heat quartz preforms to weld handles on preforms.
* Flame-tip preforms per customer specifications.
* Inspect handles for proper quality and size, perform stress-test on butted handles during inspection.
* Load/unload preforms into annealing ovens and measure orientation.
* Laser scribe handles as required.
* Cut, cone, and clean preforms.
* Calculate weight, measure length, and enter data into QDC/SAP.
What is required for this role:
* High school diploma, GED, or equivalent required.
* 1 year of relevant experience required.
* A minimum of 6 months in a manufacturing enviornment a plus.
* Prior welding experience a plus.
* Demonstrate a high level of integrity and professionalism.
* Self-directed and motivated with the ability to meet deadlines.
Curious? Apply now!
Heraeus is proud to be an Equal Opportunity Employer. We provide fair and equal consideration to all qualified applicants, regardless of sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other legally protected characteristic. Diversity is at the heart of our Vision, Mission, and Values. We are dedicated to cultivating an inclusive workforce that reflects a broad spectrum of cultures, backgrounds, and perspectives.
Any further questions?
If you need any assistance or have questions, please contact ***************************** or visit our website at ****************
Keywords: manufacturing, lathes, glass
ReqID: 57536
Welder
Welder Fitter job 42 miles from Smyrna
Start your new career as a Welder with MAU in Covington, GA. As a Welder, you will weld for carts, shelving, racks, and workstations for the food industry. What We Offer * $17.00 - $18.00 per hour * Health Benefits, including telehealth medical services
* 1st shift, Monday - Friday, 5:00 AM - 1:30 PM
* On-the-job training
* Opportunity for advancement
* Unlimited referral bonuses
What We're Looking For
* High school diploma or GED
* 6+ months of experience or classroom training
* Experience welding aluminum
* TIG experience
* Ability to conduct metrics conversions
* Capacity to thrive in a fast-paced environment, stand and walk for the duration of the shift, bend, stoop, wear required PPE (gloves, eye, and face protection) and lift 50 pounds
What You'll Do as a Welder
* Weld for carts, shelving, racks, and workstations for the food industry
* Perform other duties as assigned
Tank Builder / Welder (Nationwide)
Welder Fitter job 11 miles from Smyrna
Job Description
Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications.
We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems.
Statement of Purpose
To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities.
The PTS difference:
Our people are our #1 priority.
Teamwork is the best way to solve problems.
Safety is critical. Everyone is responsible for creating a safe work environment.
We strive to find new and better ways of doing things every day.
Clear expectations and directions are always given.
Frequent coaching and support lead to great performers and high quality for our customers.
A manager's job is to set each employee up for success every day.
We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together.
We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment.
Day to Day Duties:
Performing arc and torch cutting and gouging.
Using generators, compressors, tuggers, blowers, grinders, and other power and air tools.
Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor).
Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment.
Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment.
Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations.
Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment.
Operating forklifts, man lifts, boom lifts, and other large lifting equipment.
Knowledge of crane operations (including rigging and signaling)
Reading detailed erection and fabrication drawings.
Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks.
Completing job safety analysis, safety audits, site-specific training, and other safety training.
Follow directions and work professionally with other crew members. \
Other duties as assigned.
Requirements
Have great communication and organization skills.
The ability to solve problems and suggest improvements to our systems.
Have excellent attendance and show up to work on time every day.
The willingness to learn.
Be at least 18 years old.
Be able to lift 50 lbs.
Have a high school diploma or equivalent.
Be eligible to work in the United States.
Be willing to authorize background checks.
Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism.
Have a valid driver’s license.
Be willing to authorize motor vehicle driving record checks.
Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing.
Ability to weld is a plus.
Benefits:
Competitive Pay with annual reviews
Health, Dental and Vision insurance
401k with company match
Great culture of teamwork, learning and development.
You’ll be part of a team where YOU matter
Powered by JazzHR
9hRTJBW7Ck
Mig Welder - C
Welder Fitter job 48 miles from Smyrna
Job Description
About the Role:
We are seeking a skilled Mig Welders to join our team in Gainesville, GA. As a Mig Welder, you will be responsible for welding metal components with high precision and accuracy. Your work will contribute to the production of high-quality products that meet our clients' needs. You will work closely with our production team to ensure that all welding projects are completed on time and to the highest standards.
Minimum Qualifications:
Strong attention to detail and accuracy
Ability to work independently and as part of a team
Preferred Qualifications:
Experience with welding stainless steel and aluminum
Experience with robotic welding equipment
Experience with welding in a manufacturing environment
Experience with welding in a fast-paced environment
Responsibilities:
Performing welding operations with a high degree of precision and accuracy
Reading and interpreting blueprints and schematics
Maintaining welding equipment and tools
Ensuring that all welding projects are completed on time and to the highest standards
Collaborating with the production team to identify and resolve welding issues
Skills:
As a Mig Welder, you will use your welding skills to contribute to the production of high-quality products. You will need to have a strong attention to detail and accuracy, as well as the ability to read and interpret blueprints and schematics. You will work independently and as part of a team, collaborating with the production team to identify and resolve welding issues. Your experience with welding stainless steel and aluminum, as well as robotic welding equipment, will be beneficial in this role.
MIG Welder
Welder Fitter job 46 miles from Smyrna
At Swanton Welding Company, we strive for a culture of excellence. Swanton Welding Company is a growing manufacturer of custom steel metal fabrication. Since 1956, Swanton Welding Company has been a family-owned business that has grown our footprint and expanded with three facility locations. Swanton Welding Company is driven by ingenuity and innovation. The company invests with our most valuable resource - our people.
Swanton Welding Company is seeking a Welder that is proactive, energetic, and a team player that thrives in a manufacturing environment. The position is based out of the Griffin, GA location and the hours are Monday - Friday from 4 a.m. to 2:30 p.m.
A career at Swanton Welding Company means becoming a part of a diverse group of dynamic professionals. Our work style is collaborative, open, and welcoming of new ideas. Our employees enjoy a company culture that fosters teamwork as well as individual initiative and rewards success.
Benefits: Swanton Welding Company offers an excellent benefits package with three medical plan options, dental, vision, life insurance, disability, AD&D coverage and a 401(k) plan with company match.
Essential duties and responsibilities include, but may not be limited to:
* Understand the safety features of the machines and tooling to ensure they are operating without compromise to safety systems.
* Follows safety protocol, including wearing heat resistant gloves, flame resistant (FR) clothing, protective masks, and safety toed footwear.
* Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job.
* Assesses equipment, structures, materials, and job specifications for appropriate welding positions and methods.
* Ability to perform MIG welding activities to steel components
* Maintain welding fixtures and tooling in a suitable working order
* Visually inspect weld quality and use other quality inspection equipment to confirm compliance to part specifications.
* Maintains, organizes, and cleans equipment and work area
* Performs other duties as assigned
Qualifications and Education requirements:
* High school diploma or equivalent
* Willingness to test and pass welder qualification test
* Thorough understanding of tools used in welding including designs, uses, maintenance and repair.
* Welding experience in a manufacturing environment
* Knowledge based and working background in MIG welding of carbon and stainless steel products
* Must be able to complete a manual welding test. Welds are judged on functionality and esthetics
* Must be able to perform accurate mathematical calculations (add, subtract, multiply and divide)
* Ability to work with fractions and decimals
* A work history of compliance to safety, quality, and productivity standards
* A work history that supports a good to excellent attendance record
* Strong mechanical abilities
* Fast learner and able to adapt in a fast-paced environment
* Detail oriented approach to daily work activities
* Able to work well in a team-oriented work environment
* Positive attitude and willingness to learn
Preferred skills:
* At least 2 years' welding experience and able to perform MIG welding.
* Ability to read, interpret and understand Work Orders.
Physical requirements:
* Walking, Standing, Sitting Kneeling, Stooping
* Lifting, Carrying up to 50 pounds
Swanton Welding & Machining is an equal opportunity employer. We encourage applications from candidates of all backgrounds and experiences.
MIG Welder $18-$22 Pr Hr DOE
Welder Fitter job 46 miles from Smyrna
TempToFT
Responsibilities
Reading and interpreting blueprints and technical drawings
Measuring, cutting, and joining metals correctly
Cleaning metal and work surfaces before and after work
Keeping the welding tools and equipment clean and in proper condition
Identifying and resolving any welding issues and irregularities
Operating heavy machinery to transport welding materials and equipment
Providing clients with appropriate costs and work completion timeline
Ensuring all metals and joints are welded properly
Determining and setting the correct gas ratio
Training and overseeing the work of other welders
Using welding tools such as safety glasses, chipping hammer, and wire brush while conducting daily operations
Adhering to the safety guidelines and industry standards
Repairing and replacing welding equipment as and when required
Maintaining a safe work environment at all times
Reviewing and ensuring that the final products meet quality standards
Requirements
High school diploma or equivalent
Holding a valid welder's certificate or professional training
Proven work experience in the welding industry as a MIG Welder
Knowledge of safety protocols and industry standards
Familiarity with welding tools and equipment like gauntlet cuff gloves, auto-darkening welding helmet, and MIG pliers
Ability to read blueprints and technical drawings
Excellent physical and mental strength
Ability to work for long and flexible hours
Good observation and technical skills
Strong communication and interpersonal skills
Good mathematical skills
Ability to work in extreme weather conditions
Highly motivated individual
Ability to offer excellent customer service
Shift: 7 AM - 3:30 PM Monday through Friday.
Please call (470) 751-0263 for further Questions on this position.