Welder fitter jobs in Springfield, OR

Welder/Fabricator Are you ready to put some flame to metal? Astec - Eugene Airport Road is where welding careers grow. If you have a knack for safety, quality and team work, Astec is where you should be! *Astec is giving a $1500 sign on bonus! Astec is dedicated to a culture of Behavior Based SAFETY and a Healthy Environment! Both Day and Swing Shift Opportunities As a welder/fabricator you will: Cut and prepare surfaces or components, lay out, position, fit, tack, weld, and finish a variety of parts or products following prescribed methods and specifications Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures. Weld in flat, horizontal, vertical or overhead positions. Other duties as assigned Successful candidates should have a High school diploma. Must be able to pass weld test. Must be able to read, analyze and interpret blueprint drawings. Experience in forklift, overhead crane and rigging is plus but not required. EQUAL OPPORTUNITY STATEMENT As an Equal Opportunity Employer, Peterson Pacific Corporation does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law. Monday - Friday 6:00am - 2:30pm (Day), Monday - Friday 3:30pm - 2:00am (Swing $1.50 differential)

Your next opportunity is here - Urgently hiring Welder Fabricators in Eugene, Oregon! Job Title: Welder Fabricator Pay: $20.00 - $25.00+ per hour, DOE Hours: Monday - Friday, 7:00AM - 3:30PM As a Welder Fabricator, you'll perform MIG welding, structural fabrication, and metal cutting operations to support the production of custom steel components. You'll work closely with a knowledgeable team in a hands-on, fast-paced manufacturing environment. What You'll Do As a Welder Fabricator, you will be responsible for: Performing MIG welding using .045 wire Welding and fabricating structural steel components Cutting metal parts using shears and Parana equipment Operating torches and plasma cutters Fabricating full-size catch basins Welding grates, including tack and spot welding Following safety standards and maintaining a clean work area Using personal tools, including a welding hood (required for welders) Learning additional fabrication tasks as training is provided What You'll Bring The ideal candidate for this role will have: At least 2 years of welding/fabrication experience MIG welding experience (required) Experience working with structural steel Strong measurement and blueprint-reading skills Ability to lift up to 50 lbs and perform physical tasks such as bending, stooping, and twisting Reliable work ethic and willingness to learn additional fabrication skills Why Join Us in Eugene? Full-time, stable opportunity with a long-standing local steel manufacturer Consistent weekday schedule with no weekend work Hands-on fabrication environment with opportunities to expand your skills Ask us about our Referral Bonus Program to earn extra cash! Location & Schedule This position is on-site in Eugene, Oregon, with a full-time schedule of Monday-Friday, 7:00AM-3:30PM. Ready to Take the Next Step? If you're ready to grow your career as a Welder Fabricator in Eugene, apply today or contact our recruiting team to learn more. Don't wait - we're hiring now! #STEUG

AA/EEO Statement: Lane Community College is an Affirmative Action / Equal Opportunity / Veteran / Disabled Employer embracing equity, inclusion and accessibility. We encourage a safe and hospitable environment for historically marginalized populations including women, BIPOC, Latinx, LGBTQ+ individuals, veterans, and candidates and employees living with disabilities. Veterans Statement Lane actively recruits veterans and those with disabilities for all positions. For accommodations and questions call ************. * Veterans, please fax, e-mail, mail or deliver your documentation (DD214/DD215/letter of disability) to Human Resources; Jill Deneault, ********************, ************ * Lane Community College ensures that all documentation submitted to HR will remain confidential. Position Information: Posting Number: 250080 Job Title: Instructor Pool - Fabrication/Welding Technology Applicant Notification: Department Information Our Business, Technology, and Trades Department is seeking to expand its pool of part-time faculty to teach Fabrication and Welding Technology. * Beyond the required education and experience instructors must have a passion for what they teach and have teaching styles that support student success. Instructors are responsible for following Division and College procedures in support of teaching and learning. * This is an application pool posting for 2025-2026. The assigned location for this position is at the Lane Community College's main campus located in Eugene, Oregon. Search Information * First review date of applications may be as early as 10 business days after posting. Subsequent review dates will be based upon department needs. Lane Community College reserves the right to modify this information. * Your application will remain in the pool until a decision is made on your candidacy. Application Information * Provide all documents as requested. * A resume may not take the place of any section of the application. * Unofficial Transcripts (Certifications if applicable) are required for this position at the time of application. See instructions below. Location: Main Campus Classification: Part-time Faculty Position Type: Contracted Part-Time Faculty Anticipated Start Date: As Needed, Fall (September 2025), Winter (January 2026), or Spring (April 2026) Salary/Wage: Hourly Salary/Wage Range: Salary/Compensation Statement: * Our application is used to determine the initial salary placement for selected candidates. All employment and education history will be considered. * Starting range for part-time faculty is Step 1 - Step 10, see our Part-time Faculty Salary Schedule in our Part-time Faculty Payroll Information section. * The Part-time Faculty benefits package includes a generous contribution toward medical, dental, and vision insurance, life insurance, long-term disability, and paid sick leave. Part-time faculty may be eligible for full contracted benefits after meeting certain criteria. Grant Statement: Working Schedule: Classes as assigned by the Division Dean based on need, enrollment, and availability of contracted and/or more senior part-time faculty. FLSA: Exempt Position Status: Temporary Full/Part: Part-Time Annual Schedule: Other Annual Schedule Details: If other - see working schedule. Quicklink for Posting: ************************************** POSTING TEXT Posting Date: 07/30/2025 Closing Date: 06/30/2026 Applicant Pool: Academic Year Open Until Filled: No Required QUALIFICATIONS Required Education: Formal training in Fabrication and Welding including course work, on-the-job training and/or higher education. Required Experience: * One (1) year of industrial experience in fabrication and welding OR * One (1) year of formal training and experience in operation, maintenance, and manual skills associated with wire drive welding Licensure or Certification Requirements Conditions of Employment: * Successful applicants are required to complete a criminal background check. Infractions do not necessarily disqualify a candidate, and will be evaluated on a case-by-case basis. See our FAQs for more detail. * Must work and reside in the state of Oregon at the time their work is being performed. Preferred QUALIFICATIONS Preferred Education * Bachelor's Degree in Fabrication/Welding. * Possess industry credentials i.e. American Welding Society (AWS) Certified Welder, CWI (Certified Welding Inspector), NCCER, SENSE, API, and/or ASME. Preferred Experience * Prior teaching or industrial training experience. * Fabrication/Welding management experience. * Proficiency with the following specific welding processes: FCAW, SMAW, GTAW, OAC. * Proficiency in teaching at the community college level. * Experience with distance education/web teaching modalities is desirable. Language Statement We welcome multilingual applicants who can support and welcome all students. Bilingual/Multicultural Statement: Inclusiveness, diversity, and equity are integral to Lane's commitment to excellence in education and our commitment to student and community engagement. We welcome applicants who bring a diversity of identity, culture, experience, perspective, multilingual skills, and thought. We encourage applications from candidates that identify with groups that are historically underrepresented in higher education. Equivalency Statement: We want to find the best candidate for the job, and that candidate may be one who comes from a less traditional background. We encourage you to apply, even if you do not believe you meet every one of the qualifications described. You are also encouraged to address how your professional and lived experience, scholarship, teaching, mentorship, and/or service will contribute to the Lane mission of transforming lives through learning. Position Purpose: Faculty are professional educators with the primary responsibility of providing a quality learning experience for all Lane Community College students. The relationship of the faculty member to the student is one of the teacher of record and facilitator of learning. Essential Functions: * Plan, write, and administer Fabrication and Welding curricula to include instruction in varied learning environments, such as in-person, online, remote, and hybrid formats. * Blueprint reading. * Operation, maintenance, and manual skills associated with SMAW, GMAW, GTAW, FCAW, PAC, and OAC equipment. Support student learning through activities that include: * Exhibit compliance with College policies and procedures, accountability for leave time, timesheet completion, release time, textbook ordering and related functions. * Sustain currency in discipline and innovation in teaching. * Collegial participation in the faculty performance evaluation process. * Maintain and post office hours in alignment with College expectations. * Maintain physical campus presence for instruction and daily needs of students, departments, college, and community, as specified in the College Operations Policies and Procedures. * Maintain requirements for student records, attendance, grades, and/or other documentation; ensure a safe, quality classroom or lab, including equipment, supplies, and inventory. * Problem solve and manage sensitive information with appropriate awareness of FERPA standards; maintain confidentiality and sensitivity to the privacy needs of students. * Other duties as assigned. Curriculum Delivery * Provide high-quality classroom instruction. * Create course content, develop and revise course content and materials. * Establish learning outcomes consistent with core ability outcomes, assess outcomes using appropriate assessment tools, and use assessment results to inform improvements at a program and course level. * Incorporate college values into the curriculum and promote a respectful learning environment including facilitating awareness of multicultural and diversity issues in curricula. * Teach and develop all class syllabi and course materials, in a form that can be directly delivered to, and used by, students. * Confer with students on course materials. * Deliver curriculum to students in traditional and online formats. Online Teaching and Student Support * Engage within the online course environment to ensure Regular and Substantive Interaction (RSI). * Monitor student progress and provide reasonable coaching and assistance to struggling students toward success. * Review and grade all work submitted by students and provide timely and substantive feedback. * Provide timely response to student inquiries. * Ensure that all materials created comply with College Policies and Procedures for technology and accessibility, and applicable accessibility laws. * Use effective strategies for teaching online. Equity and Inclusion * Demonstrate Lane Community College's core value of social justice by ensuring equity and inclusion skills such as respect, inclusiveness, reflecting, valuing of cultural and personal differences, are the basis of employee and student interpersonal communications and relationships, and are applied to all position responsibilities * Duties are carried out respectfully and inclusively, regardless of age, disability, gender, gender identity or expression, social class, marital status, national origin, race, ethnicity, religion, sexual orientation, veteran's status, nationality, age, language, origin or employment status * Actively assist with ADA compliance in conjunction with Human Resources and Disability Resource departments; support appropriate access for persons with disabilities in order to provide for the success of students and staff; mentor and role model cultural competency for persons with disabilities * Must demonstrate an active concern for students, staff, and the public Supervision Statement: Reports to the Senior Instructional Dean of the Business, Technology, and Trades Division; and performs instruction-related duties and responsibilities in a timely manner and in accordance with the mission, policies, and procedures of the college: Lane Vision, Mission, Values. Physical Demands/Working Environment: Coordinate fine and gross motor movements. Coordinate hand/eye movements. Maintain balance from any position. Negotiate level surfaces, ramps, and stairs. This position works indoors and is exposed to usual office working conditions that include office noises and interruptions, such as printers, telephones, and visitors. This position requires that an employee is able to sit or stand for extended periods of time; perform cognitive and psychometric tasks for more than six (6) hours a day. Work may require transporting materials up to fifty (50) pounds with assistance as needed. Work safely. Knowledge Skills and Abilities: Expected Competencies * Analytical Thinking * Building Relationships * Change Advocate * Teamwork * Service Mindset * Process Improvement * Innovation * Supervision and Leadership * Strategic Project Management * Knowledge of instructional design, delivery, and learning theory Knowledge of & Skill in: * The differences among learning styles, current advances in teaching methods and uses of technology in education, and the ability to integrate these elements into curricula and teaching methods. * Effective teaching methods and knowledge related to a broad range of metal Fabrication and Welding technologies including machine operation (manual and CNC programming), maintenance, and manual welding skills. * Teaching individuals and groups with diverse backgrounds and varying needs. Ability to: * Advise, motivate, encourage, explain options, and guide students in the learning process. * Plan, implement, and evaluate professional-technical courses. * Maintain a classroom atmosphere conducive to student learning. * Establish and maintain effective working relations with faculty, students, and staff. * Communicate effectively. * Demonstrate organizational abilities. * Manage time effectively. * Show well-rounded leadership skills. * Show computer skills, including word processing. * Analyze and problems solve. * Write clearly and present information in concise summary reports. * Prioritize and set long and short-term goals. * Understand the role of the community college and the diversity of the community college student body. * Understand and carry out Lane Community College's commitment to student success, lifelong learning, and the needs of students, staff and the public. * Understand and carry out Lane Community College's mission and strategic agendas including College Learning Outcomes, cultural competency, and diversity. * Manage and facilitate communications between Division Dean, support staff, and full and part-time faculty. Applicant Instructions: Applicant Instructions * Incomplete applications will not be considered. All fields in the application must be completed, including employment dates, work hours, and detailed job duties. * Resume may not take the place of any section in the application. Required Documents To be considered a candidate for this position, all of the following must be included in the application package: * Online Application - Complete and submit online via the applicant portal. * Resume - Comprehensive of experience, education, and accomplishments. * Transcripts and/or Certifications - Unofficial transcripts are required at the time of application, see instructions below. If applicable: DD214 - Veterans, please fax, email, mail or deliver your documentation (DD214/DD215/letter of disability) to Human Resources at Lane Community College; Jill Deneault ********************, ************ Additional Documents and Letters of reference are not accepted. Questions? * For assistance with the online application call Human Resources at ************ * For position questions contact Wendy Milbrat, *******************. How to monitor your application * Enter ********************** into your Safe Senders list. Notifications will be sent toward the end of the search process. * Visit your Employment Opportunities account. The main page will show your status in the search. Posting closes at 9 PM on the closing date. Transcript Instructions: Transcripts and/or Certifications are required In order to be considered for the position unofficial or, official transcripts must be provided. Attach under "Optional Document", fax, email, deliver or mail to: Lane Community College Posting #250080 / Attn: Wendy Milbrat Building #33/ Office 115 4000 E 30th Ave Eugene, OR 97405 Email: ******************* Phone: ************ Fax: ************ * Official transcripts will be required within thirty (30) days from hire if you are the selected candidate for the position. * International degrees will require a foreign degree evaluation for their US equivalent. For more details, click here. Union Association: LCC Education Association (Faculty)

Job Description At Astec-Franklin Blvd, formerly known as Johnson Crushers International (JCI), our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! $1500.00 Sign-On Bonus and Day or Swing shift. Swing has a $2.00 shift differential. What You'll Do: • Cut and prepare surfaces or components • Lay out, position, fit, tack, weld, and finish a variety of parts or products following established methods and specifications • Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures • Weld in flat, horizontal, vertical, or overhead positions • Other job duties as assigned Why You'll Love Working for Us: • Health, Dental, Vision- Day 1 Eligibility • Life, and Spousal Insurance • Health Savings and Flexible Spending Accounts • Short-Term and Long-Term Disability • 401(k) with Company Match • PTO • Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: • High school diploma or GED preferred • Forklift, overhead crane, and rigging experience required • Must pass weld test • Ability to read, analyze, and interpret detailed drawings ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

Read and interpret Drawings and work orders Fabricate / weld stainless steel components with attention to detail Must be able to safely operate the following production machinery: Shear Metal Saw Press Brake Overhead Crane Welder Ability to safely operate the following production machinery a plus: Hydraulic Punch Plasma Table Experience with a Bridgeport milling machine Non job specific duties as assigned Experience installing industrial equipment We are a small local company that manufactures high end, hand built commercial grade dehydrators. We offer PTO, medical and life insurance, and a Simple IRA. All new employees are subject to a 90-day probationary period. Education: High school or equivalent (Preferred) Experience: Fabrication: 2 years (Preferred) Probation Period: 90 days

We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our Tangent, OR facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1" thick coupon. 2. Operate air arc to remove steel (back gouging). 3. Grind with 90° angle grinder. 5. Read weld symbols and check weld size using weld fillet gauges. 6. Heat material to required temperature using temperature sticks and heating torch/cutting torch. (read and follow pre-heart & interpass temperature tables.) 7. Set machines according to procedure charts. 8. Use air chipper to chip of slag. 9. Use natural gas propane heaters to pre-heat steel. 10. Operate stud welder. 11. Follow weld procedures as it applies to volts, amps & wire feed speed. 12. Heat, straighten and be able to know when to use pre-heat to offset distortion. 14. Perform other duties as required by management. Shift Times: Day (M-F): 6:00am-4:30pm Swing Shift: 4:30pm-3:00am Qualifications and Requirements Required: Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years' experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90° angle grinder, crane, heating torch, cutting torch.

We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our Tangent, OR facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1" thick coupon. 2. Operate air arc to remove steel (back gouging). 3. Grind with 90° angle grinder. 5. Read weld symbols and check weld size using weld fillet gauges. 6. Heat material to required temperature using temperature sticks and heating torch/cutting torch. (read and follow pre-heart & interpass temperature tables.) 7. Set machines according to procedure charts. 8. Use air chipper to chip of slag. 9. Use natural gas propane heaters to pre-heat steel. 10. Operate stud welder. 11. Follow weld procedures as it applies to volts, amps & wire feed speed. 12. Heat, straighten and be able to know when to use pre-heat to offset distortion. 14. Perform other duties as required by management. Shift Times: Day (M-F): 6:00am-4:30pm Swing Shift: 4:30pm-3:00am Qualifications and Requirements Required: Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years' experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90° angle grinder, crane, heating torch, cutting torch.

TIG Welder - Titanium Aerospace Parts: Prior Experience Required If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: This welder position requires the candidate to TIG weld in a chamber under argon atmosphere on titanium castings for the aerospace industry. At least one year of prior experience welding titanium is required. Duties and Responsibilities: * Titanium TIG welding in chamber to repair castings, following all applicable procedures. * Using tools such as calipers, profile templates, etc., to accurately repair castings. * Working with your team on rework plans to make castings conform to specification. * Using grinder to shape tungsten. * Load and unload castings from chamber. * Keep equipment and work area clean and orderly. * Other duties as assigned. Minimum Qualifications and Experience: * Completion of formal vocation program and/or 1 year or more of prior TIG welding experience is required. * Must pass welding test within 4 weeks of start date. * Must pass an annual eye exam. * This position requires ability to bend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations. * Must have basic high-school level math skills including addition, subtraction, multiplication, and division. * Able to use small, fine tools. * Good attendance record required. * Requires continuous mental and/or visual attention to detail. * Able to understand measurements; read and use measurement tools correctly. * Able to work as a team player and be self-motivated. * Able to read, understand, and follow written and verbal instructions. * HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered. * Must be at least 18 years of age. * Stable job history including more than 1 year at previous or recent employer. * Must be able to lift up to 50 lbs with or without reasonable accommodations. * Must be willing to undergo a pre-employment background check. * Must be willing to participate in pre-employment drug screening. Environment: * The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Shifts after training: * Swing Shift (Monday-Thursday 3:30pm-2:15am) includes $1.00/hr. shift differential * Weekend Shifts (Friday/Saturday/Sunday) 3x12 includes $1.25/hr. shift differential for days; $2.50/hr. shift differential for nights * Training may not be available on the same shift * Overtime offered based on business needs Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: *********************** U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position

Experienced Steel Welder/Fabricator: Requirements: Verifiable 5-10 years of Full-Time MIG Welding AND Fabricating experience with AWS weld certifications D.1.1 - will consider degree in welding or certificate equivalent to 1 year of Full-Time experience Knowledge of industry terminology Ability to read weld symbols and prints Ability to accurately measure Ability to follow verbal and written directions Weld & Fabrication test required during interview process - structural steel fabrication Must be reliable - arrive at work on time and at work every day scheduled If Overtime is necessary - must be willing to work as early as 6am & work Saturday mornings (gone by noon) Provide own basic tools - list provided during interview Polite, friendly, cooperative attitude Efficient team player with good communication skills to get the job done properly Standing 90-100% of the day on concrete floors in covered, outdoor conditions (inside warehouse/shop environment) Ability to push, pull and assist movement of heavy materials using crane, forklift and carts as needed Ability to lift up to 50-75lbs on regular basis Standing/stooping for long periods using various equipment Holding welding and/or grinding equipment for 8+ hours a day Starting Rate of Pay: $21.00-22.00/hr - review after 90 days of employment to determine payscale moving forward. At 90 days, Employees will be evaluated based on daily performance, attendance, attitude, aptitude, and time management to determine pay rate moving forward. Benefits are mostly paid by the company and add approximately $4/hr to pay rate. Review after 90 days of employment to determine payscale moving forward based on daily performance/merit, attendance, attitude and time management. (Company paid benefits kick in on the 1st of the month following 60 days of employment. These benefits add around $4.00 per hour in company paid benefits to your package - see below) Benefits: These company paid benefits kick in on the 1st of the month after 60 days of employment, they add rouchly $4.00/hour to your hourly rate of pay. As of 2025, the employee contribution for base insurance is approximately $110.00/month for base plan. Paid weekly - direct deposit available & encouraged Medical, Dental, Vision, AD&D, and Life Insurance benefits begin on the 1st of the month after 60 days of employment Medical, dental, vision coverages include $ 648.68 paid by the company toward premiums - for Employee only - starting 11/1/25 the employee portion ranges from $54 to $227/month depending on the plan you choose AD&D and Life insurance is 100% paid by the company - you get a total of $10,000 in life insurance Review at 90 days determines your correct pay scale for the skills you bring to T-Plus After 90 days you earn: Up to 40 hours a year of company paid sick time - earned as you work 3 paid holidays - Thanksgiving Day, Christmas Day and New Year's Day Non-paid holidays that we take off depending on workload and timing (for example: the day after Thanksgiving, July 4th, Memorial Day, Labor Day, etc.) Optional other insurances such as short term disability, critical care, LegalShield, etc. are available After 6 months you earn: 401k that has a safe harbor company match of 3% then a ½% match for each % up to 5% Example: Joe puts 5% into his 401k each paycheck, the company contributes 4% Example: Jane puts 3% into her 401k each check, the company puts in 3% too Enrollment is at the 1st of each quarter so you enroll after your qualification date (Jan 1, Apr 1, July 1, Oct 1) After 12 months you earn: One week of paid vacation time - based on the hours you have worked over the past year - typically 40 hours After 3 years you earn: Two weeks of paid vacation, instead of one week - typically 80 hours

ENTEK is synonymous with some of the world's best lead-acid separators, lithium-ion separators, extruders, and engineering services for the battery and extrusion markets. We operate on six continents; astronomical growth for the simple lead-acid battery separator company James Young and Pete Johnson founded in Lebanon, OR in 1984. Our intimate knowledge of both the design and manufacturing of separators spurred the introduction of our high-speed co-rotating twin-screw E-Max extruder in 1998-recognized as the fastest to install and easiest to operate extruder on the market. In 2001, our first lithium-ion battery separator line expanded our reach in Asian markets, delivering a quality product at a market-leading price. Our success here is fueled by consistently living our core values of respect, integrity, commitment, and innovation. From state-of-the-art separators and extruders, to 360° engineering and support for all of it, ENTEK's commitment to non-stop innovation and attention to customer service keeps production lines humming. We are set up to make sure that a world at work has what it needs to stay at work, 24-7. SUMMARY The primary function of this position is for lays out, fits and welds fabricated components to assembly structures forms, such as machinery frames, tanks, and parts according to prints and knowledge of welding metallurgy. Selects equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal shrinkage and welding techniques. May operate other equipment such as overhead crane, forklift, high lift, crane truck. PRIMARY DUTIES AND RESPONSIBILITIES may include all or some of the following. Other duties may be assigned as needed. Welding and fabrication of 316L SS tanks Qualifications EDUCATION and/or EXPERIENCE Class 5 welding certification and at least five years of experience in welding and fabrication environment. Welding and fabrication of Tank building is a plus. TIG, MIG & Stick Welding skills preferred. Additional Information Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: Ability to comprehend and apply principles of advanced algebra, trigonometry. Ability to work with concepts such as limits, engineering equations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is occasionally required to talk or hear. The employee must use proper lifting technique when required to lift and/or move objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The Maintenance Millwright work frequently requires work to be done above ground level, using ladders, lift platforms, scaffolding, catwalks, safety belts, etc. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essentials functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes or airborne particles, extreme heat, risk of electrical shock, and vibration. The employee is occasionally exposed to high, precarious places; toxic or caustic chemicals; and outside weather conditions. The noise level in the work environment is usually loud. This job description is not intended to be all inclusive and assignments may change as operations necessitate. We are an Equal Opportunity Employer. M/F/Disabled/Veteran

Job Title: Pipe Welder Pay: $36 per hour Hours: 40-50 per week Job Type: Full-Time | In-Person We are seeking a skilled and reliable Pipe Welder to join our team in Eugene. This role involves performing high-quality TIG and Stick welding on steel pipe, interpreting blueprints, and working both independently and with a team. The ideal candidate is safety-focused, detail-oriented, and experienced in industrial or mechanical environments. Key Responsibilities Read and interpret blueprints Perform TIG and Stick welding on steel pipe Execute welds to high-quality standards Collaborate with team members and work independently when required Follow all company policies and OSHA safety protocols Qualifications Minimum of 2 years of TIG and Stick welding experience Strong blueprint reading and layout skills Mechanical or industrial background preferred OSHA 10 certification required Ability to work overtime as needed Must pass a pre-employment drug screen Schedule 8-10 hour shifts Monday through Friday Overtime and occasional weekends as required

JCI welder/fabricators have a knack for safety, quality and team work. If these sound like characteristics that describe you, JCI is where you should be! At JCI, we take pride in developing talent. If you're new to welding/fabrication and want to expand your skillset, this is the place for you! OR- if you're an experienced welder, bored with seeing the same plans all the time, we can offer variety! Our welders start at $20-$25/hr depending on experience and the scale currently goes to $30.81- so if opportunity is what you want, that is what you will get at JCI! As a welder/fabricator you will: Cut and prepare surfaces or components, lay out, position, fit, tack, weld, and finish a variety of parts or products following prescribed methods and specifications Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures. Weld in flat, horizontal, vertical or overhead positions. Other duties as assigned Successful candidates should have a High school diploma. Must be able to pass JCI weld test. Must be able to read, analyze and interpret detail drawings. Experience in forklift, overhead crane and rigging is required. At JCI, we take pride in developing talent. If you want to expand your skillset, this is the place for you! EOE/M/F/Vets/Individuals with Disabilities.

At Astec-Franklin Blvd, formerly known as Johnson Crushers International (JCI), our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! $1500.00 Sign-On Bonus and Day or Swing shift. Swing has a $2.00 shift differential. What You'll Do: • Cut and prepare surfaces or components • Lay out, position, fit, tack, weld, and finish a variety of parts or products following established methods and specifications • Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures • Weld in flat, horizontal, vertical, or overhead positions • Other job duties as assigned Why You'll Love Working for Us: • Health, Dental, Vision- Day 1 Eligibility • Life, and Spousal Insurance • Health Savings and Flexible Spending Accounts • Short-Term and Long-Term Disability • 401(k) with Company Match • PTO • Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: • High school diploma or GED preferred • Forklift, overhead crane, and rigging experience required • Must pass weld test • Ability to read, analyze, and interpret detailed drawings ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

Your next opportunity is here - Urgently hiring Welder Fabricators in Eugene, Oregon! Job Title: Welder Fabricator Day Shift Pay: $21.00 - $28.00 per hour, DOE Hours: Monday - Friday, 7:00AM - 3:30PM As a Welder Fabricator, you'll perform MIG, Fluxcore, and occasional TIG welding, operate fabrication equipment, and prepare metal components for assembly. You'll work on a wide variety of metal products and custom jobs-perfect for welders who enjoy diverse, hands-on work. What You'll Do As a Welder Fabricator, you will be responsible for: Performing Hardwire/MIG welding and Fluxcore welding Completing occasional TIG welding as needed Grinding and deburring metal parts using handheld and palm grinders Operating drill presses and press brakes Removing parts from laser cutting machinery and burn tables Tack and spot welding components Reading and measuring accurately with tape measures Maintaining a clean and organized shop environment Supporting production goals by delivering high-quality, consistent work What You'll Bring The ideal candidate for this role will have: Prior welding experience (required) MIG and Fluxcore welding experience; TIG welding preferred Ability to read and interpret blueprints Ability to lift up to 30 lbs Attention to detail and strong fabrication skills Reliable attendance and a strong work ethic Why Join Us in Eugene? Competitive pay at $21-$28/hr DOE Temp-to-hire opportunity with wage reviews upon hire and during probation Hands-on fabrication environment with diverse contract manufacturing projects Excellent benefits upon permanent hire, including: Full Medical, Dental, and Vision Two weeks PTO 8 paid holidays 401(k) with 4% match Life insurance Ask us about our Referral Bonus Program to earn extra cash! Location & Schedule This position is on-site in Eugene, Oregon, with a full-time schedule of: Monday-Friday, 7:00AM-3:30PM Ready to Take the Next Step? If you're ready to grow your career as a Welder Fabricator in Eugene, apply today. Don't wait - we're hiring now! #STEUG

TIG Welder - Titanium Aerospace Parts: Prior Experience Required If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: This welder position requires the candidate to TIG weld in a chamber under argon atmosphere on titanium castings for the aerospace industry. At least one year of prior experience welding titanium is required. Duties and Responsibilities: * Titanium TIG welding in chamber to repair castings, following all applicable procedures. * Using tools such as calipers, profile templates, etc., to accurately repair castings. * Working with your team on rework plans to make castings conform to specification. * Using grinder to shape tungsten. * Load and unload castings from chamber. * Keep equipment and work area clean and orderly. * Other duties as assigned. Minimum Qualifications and Experience: * Completion of formal vocation program and/or 1 year or more of prior TIG welding experience is required. * Must pass welding test within 4 weeks of start date. * Must pass an annual eye exam. * This position requires ability to bend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations. * Must have basic high-school level math skills including addition, subtraction, multiplication, and division. * Able to use small, fine tools. * Good attendance record required. * Requires continuous mental and/or visual attention to detail. * Able to understand measurements; read and use measurement tools correctly. * Able to work as a team player and be self-motivated. * Able to read, understand, and follow written and verbal instructions. * HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered. * Must be at least 18 years of age. * Stable job history including more than 1 year at previous or recent employer. * Must be able to lift up to 50 lbs with or without reasonable accommodations. * Must be willing to undergo a pre-employment background check. * Must be willing to participate in pre-employment drug screening. Environment: * The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: * Training available on day shift * Shift after training: Swing Shift (Monday-Thursday 3:30pm-2:15am) includes $1.00/hr. shift differential * Overtime offered based on business needs Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: *********************** U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position

ENTEK is synonymous with some of the world's best lead-acid separators, lithium-ion separators, extruders, and engineering services for the battery and extrusion markets. We operate on six continents; astronomical growth for the simple lead-acid battery separator company James Young and Pete Johnson founded in Lebanon, OR in 1984. Our intimate knowledge of both the design and manufacturing of separators spurred the introduction of our high-speed co-rotating twin-screw E-Max extruder in 1998-recognized as the fastest to install and easiest to operate extruder on the market. In 2001, our first lithium-ion battery separator line expanded our reach in Asian markets, delivering a quality product at a market-leading price. Our success here is fueled by consistently living our core values of respect, integrity, commitment, and innovation. From state-of-the-art separators and extruders, to 360° engineering and support for all of it, ENTEK's commitment to non-stop innovation and attention to customer service keeps production lines humming. We are set up to make sure that a world at work has what it needs to stay at work, 24-7. Job Description SUMMARY The primary function of this position is for lays out, fits and welds fabricated components to assembly structures forms, such as machinery frames, tanks, and parts according to prints and knowledge of welding metallurgy. Selects equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal shrinkage and welding techniques. May operate other equipment such as overhead crane, forklift, high lift, crane truck. PRIMARY DUTIES AND RESPONSIBILITIES may include all or some of the following. Other duties may be assigned as needed. Welding and fabrication of 316L SS tanks QualificationsAt least five years experience in welding and fabrication environment. Welding and fabrication of Tank building is a plus. TIG, MIG & Stick Welding skills preferred. Additional Information Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: Ability to comprehend and apply principles of advanced algebra, trigonometry. Ability to work with concepts such as limits, engineering equations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to talk or hear. We are an Equal Opportunity Employer. M/F/Disabled/Veteran

JCI welder/fabricators have a knack for safety, quality and team work. If these sound like characteristics that describe you, JCI is where you should be! At JCI, we take pride in developing talent. If you're new to welding/fabrication and want to expand your skillset, this is the place for you! OR- if you're an experienced welder, bored with seeing the same plans all the time, we can offer variety! Our welders start at $20-$25/hr depending on experience and the scale currently goes to $30.81- so if opportunity is what you want, that is what you will get at JCI! As a welder/fabricator you will: Cut and prepare surfaces or components, lay out, position, fit, tack, weld, and finish a variety of parts or products following prescribed methods and specifications Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures. Weld in flat, horizontal, vertical or overhead positions. Other duties as assigned Successful candidates should have a High school diploma. Must be able to pass JCI weld test. Must be able to read, analyze and interpret detail drawings. Experience in forklift, overhead crane and rigging is required. At JCI, we take pride in developing talent. If you want to expand your skillset, this is the place for you! EOE/M/F/Vets/Individuals with Disabilities.

At Astec-Franklin Blvd, formerly known as Johnson Crushers International (JCI), our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! $1500.00 Sign-On Bonus and Day or Swing shift. Swing has a $2.00 shift differential. What You'll Do: * Cut and prepare surfaces or components * Lay out, position, fit, tack, weld, and finish a variety of parts or products following established methods and specifications * Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures * Weld in flat, horizontal, vertical, or overhead positions * Other job duties as assigned Why You'll Love Working for Us: * Health, Dental, Vision- Day 1 Eligibility * Life, and Spousal Insurance * Health Savings and Flexible Spending Accounts * Short-Term and Long-Term Disability * 401(k) with Company Match * PTO * Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: * High school diploma or GED preferred * Forklift, overhead crane, and rigging experience required * Must pass weld test * Ability to read, analyze, and interpret detailed drawings ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

Job Title: Production MIG Welder - Immediate Opening! Pay: $20.00 - $22.00/hour, DOE Hours: Monday - Thursday, 5:00AM - 3:30PM Need help applying? Call us at ************! As a Production Welder you will be responsible for: Stage parts using sawhorses, jigs, overhead crane & forklifts Read & Interpret Blue Prints and various Spec Sheets Perform Wire feed welding Must display a 'Sense of Urgency' - this is production welding! Some Heavy Lifting may be required General Clean-up as needed The ideal candidate for this role will have: Previous MIG welding experience required Must be able to lift up to 50lbs as needed throughout the day and up to 75lbs with a 'Team-Lift' Must be able to read & use a tape measure Must be able to stand for up to 10 hours a day. Must be able to read blueprints and spec sheets Must display 'Sense of Urgency' - this is a fast-paced production facility! Benefits: Ask us about our Referral Bonus Program to earn extra cash! Ready to take the next step? Apply now for this Production Welder role in Coburg-or contact us to learn more! #STEUG