Welder fitter jobs in Tuscaloosa, AL

Epsilon Worker DUTIES & RESPONSIBILITIES: Perform welding duties using a wire welder and stick welder Weld steel components with welding equipment as specified by layouts, engineering drawings, work orders, or verbal instructions. Work includes set-up, laying out work using jigs/fixtures or hand layouts to fabricate parts and/or rework finished products. Works and assists in the fabrication or welding of multi-component parts. Operate forklifts, hoists, hand power tools, slings, grinders, cutting torch, and other hand tools related to the jobs needs. Inspect and correct welds as necessary to meet product specifications. Read, understand, and follow job order specifications, engineering drawings, and/or work orders. Inspect equipment to maintain functional equipment if any equipment needs repairs notify supervisor/lead or maintenance department. Willingness to cross-train and perform the work of other job tasks in addition to the primary assigned position. ACCOUNTABILITIES AND PERFORMANCE MEASURES: Produce high quality of work with zero non conformances Meet project deadlines as assigned Work in a safe manner following Health & Safety policies and procedures Maintain an excellent attendance & punctuality record EDUCATION, SKILLS & EXPERIENCE REQUIRED: Possess a suitable combination of education and experience to meet the requirements of this position Must have AWS D 1.1 certification. A minimum of 5 years welding experience is preferred Familiar with a variety of welder concepts, practices, and procedures. Ability to understand welding symbols and diagrams, read blueprints, and/or other printed instructional material in the welding of products or parts. Must be thoroughly familiar with welding equipment such as torches, torch tips, filler rods, flux, hoses, valves, and gas cylinders. Must be able to work with various hand tools and operate an industrial powered fork truck Have a demonstrated proficiency reading and interpreting work orders and drawings. Able to work independently or as a team player Able to take direction and communicate with others Have excellent time management skills, organized and detail oriented Employs a friendly, outgoing personality, respectful of co-workers and ability to work with individuals to carry out goals of the organization PHYSICAL DEMANDS: The physical demands described here are representative of those that are expected for an employee to successfully perform the essential functions of this job. Perform work standing up in work cell for 8-10 hours per day and up to 6 days a week. The employee frequently is required to stand; walk ; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move material during the course of performing his/her job Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

Traveling TIG Welders - Journeyman Level - (Alabama) Pay Range: $24-$34/hour + Per Diem (TBD) United Trades of America is hiring Journeyman-level TIG Welders for projects across Alabama. Positions include new construction, shutdowns, and repairs. Candidates must have: Strong TIG welding skills Experience working with carbon and stainless steel OSHA 10 (minimum) or OSHA 30 certification Ability to pass verbal/written and hands-on tests Willingness to complete a pre-employment drug screen and background check Certification preferred. Apply now: *************************** Email your resume: *****************************

Birmingham, AL Order: 955057 Order Type : Temp Elevate Workforce is looking for certified welder in the Birmingham AL are. Payrate 19 hr but negotiable depending on experience The welder will perform submerged arc and 3G flux core steel plate welding and heavy fabrication in a job shop environment. Must take and pass weld test in accordance to AWS D1.5 Must take and pass x-ray weld test Skills: 5 years experience in structural steel or fabrication welding Pay Rate : 19.00

Job DescriptionDescription: The 1st Class Structural Welder will be pivotal in the construction and assembly of marine vessels and other structural components. This role will be contributing to the structural integrity and functionality of marine projects. The schedule for this role has 6 hours of built in overtime. Additional overtime is typically available for those interested. Full Time Position: Monday-Thursday 6:00 AM - 4:30 PM and Friday 6:00 AM - 12:00 PM Successful candidates will pass a Open-Butt V-Groove Weld Test in the 3g vertical/4g overhead position(s). Full benefits package includes medical, dental, vision, 401(k) and additional voluntary benefits. Key Responsibilities: Welding Functions: Perform various welding tasks, including Frame Tacking, Non-Watertight Butts, Butt Welding, Pick-up Welding, with a focus on producing consistent, high-quality welds. Collaboration: Coordinate close with other welders, pipe fitters, and supervisors to ensure timely and accurate completion of projects. Safety Compliance: Follow all safety protocols and procedures to maintain a safe working environment for yourself and your colleagues. Requirements: Proven experience as a Structural Welder in shipbuilding or maritime construction (3 years of prior experience preferred). Must be able to pass and certify on 3g (vertical) and 4g (overhead). Demonstrated knowledge and ability to perform various welding functions with precision. Capable of handling a physical workload and working in various positions. Ability to consistently produce welds that meet quality and production standards. Education: High school diploma or equivalent preferred. Additional technical training or certification in welding, fabrication, or shipbuilding preferred. Physical Requirements: Ability to lift heavy objects and work in confined spaces as required in a shipbuilding environment. Physical agility and dexterity to perform tasks such as bending, stooping, and reaching. Willingness to work in various weather conditions and environments, including both indoor and outdoor settings. If you are a skilled welder ready for a challenging role in a dynamic environment, we encourage you to apply immediately.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials, including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Safety. Take an active role in prioritizing safety for yourself and others throughout the operation at all times in accordance with MSHA and Vulcan standards. Inspect and Diagnose. Inspect and diagnose repair and maintenance of mobile and plant equipment. Plan Jobs. Plan, organize, weld, fit, and layout construction and repair jobs from blueprints. Fabricate structural components according to company standards. Fitting and welding according to blueprints. Welding. Stick and Dual Shield Welding. Weld materials in flat, vertical, and overhead positions. Cut materials using air arcs, burning rods, and acetylene/oxygen cutting torches to fit fabrication and job requirements. Perform welding repair and maintenance to stational production-related equipment, machinery, and structures such as conveyors, crushers, elevators, drives, and screws. Perform General Physical Activities. Perform physical activities that require moving your whole body and considerable use of your arms and legs, such as climbing, lifting, balancing, walking, stooping, and handling materials. Must have the ability to work at elevated heights. Problem Solving. Must be able to problem solve and make independent decisions regarding weld draws while fabricating and addressing other issues. Travel. In-state travel is required occasionally. Skills You'll Need: Leadership. Provide leadership and coaching to other team members. Experience. 15 years of Fabrication Experience. Must have welding experience. Must be able to perform brazing, welding, arc welding, and cutting tasks. Functional Knowledge. Must have extensive knowledge of fitting, welding, and fabrication finishing accuracy. Flexibility. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is that the work we do impacts daily lives - and every employee contributes. The aggregates we produce are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs, and helping our employees meet their goals, as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Job Title: Structural Welder Job Type: Full-Time Schedule: 45-55 hours per week, with occasional Saturdays as needed Salary: $25-$28 per hour (DOE) Job Description: We are seeking a skilled Structural Welder to join our team in Birmingham. The ideal candidate will have hands-on experience in welding, cutting, and fabricating metal structures according to blueprints and technical specifications. You will work with a variety of metals and welding techniques to ensure high-quality results in compliance with safety standards. Key Responsibilities: Weld, cut, and fabricate metal structures and components based on blueprints and specifications. Utilize MIG, TIG, and Stick welding techniques on steel, stainless steel, and aluminum. Inspect materials and completed welds to meet quality standards and safety regulations. Read and interpret detailed technical drawings and schematics. Perform welding tasks in various environments, including construction sites and workshops. Maintain welding equipment and tools in proper working condition. Collaborate with project managers, engineers, and team members to meet project deadlines. Ensure all work follows safety guidelines and company procedures. Qualifications: Proven experience as a Structural Welder with a portfolio of completed projects. Welding certification (AWS, ASME, or equivalent) preferred. Proficient in MIG, TIG, and Stick welding processes. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and commitment to high-quality workmanship. Excellent problem-solving and troubleshooting skills. Ability to work in indoor and outdoor environments, including extreme weather conditions. Must have OSHA 10 certification. Strong safety awareness and adherence to safety protocols..

Welder BH Job ID: BH-3354-1 SF Job Req ID: Welder Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job title: Welder II Shift: 1st Shift Monday - Thursday 6 am - 4:30 pm/ Friday - 6am - 4pm. Two weekends a month Location: Moody, AL (on-site) About Us Ingersoll Rand is a Fortune 500 company with a passion for making lives better. We do this by living our values, and through a relentless focus on the success of our customers and partnering with our employees to think and act like owners. We believe in sustainability through the development and distribution of a broad range of global brands designed to meet the needs of our customers in both efficient and responsible ways. Ingersoll Rand is a diverse and inclusive environment. For more information visit: ************* Job Overview: We are seeking a skilled Welder to join our dynamic team. The Welder will be responsible for performing welding tasks to assemble and fabricate metal structures and components according to specifications. This role requires proficiency in various welding techniques, attention to detail, and a commitment to safety and quality. Responsibilities: * Welding nickel 55/45 wire to cast-iron as a filler or to build back up or to fill in part erosion/cavitation * Welds all types of metals and alloys of various sizes, shapes, and thicknesses, including dissimilar metals such as steel. * Operates various hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. * May set up, operate, and/or tend to robots that weld, braze, solder, or heat treat metal products, components, or assemblies. * Read and understand fabrication blueprints/drawings; * Fit metal components as per provided blueprints/drawings and specifications, ensuring all tolerances are met; * Using processes such as GMAW (MIG), GTAW (TIG) and FCAW to fuse together metal segments; * Operate welding equipment (manual or semi-automatic), metal shaping machines; * Ensuring that all tasks are performed in the allotted time provided and in accordance with Health and Safety regulations and company policies and procedures; * Basic maintenance of welding equipment. * As required, operate metal working equipment including shear, press brake, roll forming machine, saws, etc. Requirements: * High School Diploma or GED * 3+ years of experience welding * 2+ years of fitting experience Core Competencies: * Experience and ability to read and understand fabrication prints; * Manual Dexterity and hand-eye co-ordination; * Able to stand for extended periods of time and handle heavy loads (up to 50lbs) * Ability to work both independently, with little supervision and as a team * Ability to adjust quickly to changing priorities and conditions Preferences: * GTAW, SMAW and Sub-arc welding experience * Reading and understanding blueprints * The ability to pass a GMAW/FCAW 6G test. Travel & Work Arrangements/Requirements * This position will be based in Moody, AL with minimal anticipated travel. What we Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit ************* What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances.

You may not know our name, but you know our products. What we make is part the places where we live, work and play - all day, everyday. Zekelman is a family of companies - 100% domestic manufacturers - with a legacy dating back to 1877. We're proud to be the largest independent steel pipe and tube manufacturer in North America and the leading innovator in multi-family housing development. We believe in what we build and what we build, builds the world around us. Hospitals, hotels, schools, bridges, airports and more. Come build a career you believe in. About the Role As a End Welder at Atlas Tube, a division of Zekelman Industries, Birmingham, AL, you will play a key role in supporting efficient tube mill operations by welding coil ends, maintaining material flow, and assisting with mill changeovers. This role is ideal for someone who is safety-focused, mechanically inclined, and committed to improving uptime, product quality, and overall mill performance. What You'll Do Operate controls for the leveler and end welder. Set up the butt welder for each gauge of material and weld coil ends together. Identify butt welds, gauge changes, and coil numbers with paint. Keep the accumulator loaded with sufficient steel supply to run the mill continuously. Assist in the performance of mill changeovers. Complete all required operating and quality reports accurately. Assist maintenance personnel in making repairs to equipment. Assist other operators during breakdowns, bottlenecks, and scheduled downtime. Report irregularities or malfunctions to managers and/or maintenance. Empty all scrap buckets and maintain proper scrap flow. Keep the work area and equipment clean and in a safe condition. Operate the crane for loading coils. Keep the uncoiler loaded with correct material for production. Perform other duties as assigned to support mill operations. Who You Are High school diploma or GED preferred. 2+ years of experience in a manufacturing facility. Tube mill manufacturing experience preferred. Proven leadership skills. Ability to follow written and verbal instructions. Basic computer skills and ability to read measuring devices/equipment. Basic math skills. Effective listening, communication, and interpersonal skills. Visual acuity to read and record numerical data. Strong attention to detail, dependability, professionalism, and a strong work ethic. Regular full-time, predictable onsite attendance per the posted schedule. Physical Abilities Regularly lift and/or move up to 50 pounds. Walk or stand for extended periods of time during the shift. Bend, twist, stoop, sit, kneel, crawl, push, and pull as required. Reach in all directions to complete job tasks. Meet additional physical requirements as needed for safe and effective job performance. What You'll Get Zekelman Industries offers competitive compensation and excellent benefits, including low-cost, high-quality medical and dental benefits. In addition, we have an amazing tuition assistance program, a bonus plan, a 401(k) plan with a generous company match, loyalty awards, and much more: Competitive Compensation Bonus Plan & Profit-Sharing Opportunities 401(k) with Company Match Comprehensive Health, Dental & Vision Insurance Tuition Assistance Program Paid Vacation & Holidays Employee Loyalty Awards Compensation & Benefits Below is the expected base hourly range for this position. This is a good-faith estimate, and offers will be determined based on experience, education, skill set, and interview performance. Base Hourly Range: $24.26 USD Zekelman Industries offers competitive compensation and excellent benefits, including low-cost, high-quality medical and dental benefits. In addition, we have an amazing tuition assistance program, a bonus plan, a 401(k) plan with a generous company match, immediate vesting, and much more. M/F/D/V We are Zekelman Industries. We manufacture superior quality tubular and related products, and provide outstanding service for our valued customers. We seek to continuously advance the skills and opportunities of our employees, utilizing the latest technology and management tools available to consistently increase profitability and the enterprise value of Zekelman Industries and of our customers.

Job Details Pelham, AL Pelham, AL Full Time None Second ShiftDescription This position is responsible to lay out, fit and fabricate metal components to assemble structural forms using knowledge of welding techniques, metallurgy, and engineering requirements. RESPONSIBILITIES & EXPECTATIONS: 1. Welding • Weld parts in flat, vertical, and/or overhead positions • weld in all positions, vertical, horizontal • Evaluate all engineering drawings and ensure implementation according to welding specifications. • Perform all welding work with help of forming and cutting equipment. • Provide assistance to production process wherever necessary. • Design and produce new parts according to specifications. • Perform efficient welding of various metal objects. • Perform work with help of various hand and power tools. • Analyze diagrams and specifications and cut all metal accordingly with help of cutting equipment. • Evaluate finished products and perform quality checks on products. • Administer all welding activities in a safe and efficient manner. • Assemble old units and perform modification and repair work if required. • Collaborate work with metal sheets and apply various insulation materials. 2. Read Blueprints and/or Drawings • Use Welding material per provided drawings. • Communicate defects to manager. 3. Safety • Attend scheduled safety meetings. • Enforce all applicable safety policies. • Maintain a safe work environment • Promote safety among co-workers. • Participate in Behavior Based Safety program. 4. Power saws and portable grinders • Assist in use of portable grinder, hand file, and/or scraper as necessary • Use precision measuring tools to inspect grooves and angles 5. Other • All other duties as assigned. ATTRIBUTES: • Problem Solving - Ability to read blueprints • Must be capable of working any shift, overtime, be on-call, or work seven days a week, if needed. • Must be able to multiple tasks with a strong sense of urgency to meet the customer needs. • Must be able to work well within a team environment and take instructions from management and co-workers. • Must be a self-starter with the ability to work independently • Must possess the basic reading and math skills • Must have good written and verbal communicate skills. • Strong record of attendance reliability • Safety Oriented with the ability to work well within a team environment. • Must be capable of performing the essential job duties required of this job Physical Demands include, but are not limited to: • Must be physically able to perform work assigned. • Must be physically capable of accessing all plant locations. • Access all areas within a site which could include heights, confined spaces, climbing ladders or stairs, and accessing tunnels. • Will be working at times in covered environment or in an outside environment. • The employee will be exposed to the following working conditions: Extreme Heat and Cold, Noise, Vibration, Oils, and Atmospheric Conditions such as Dust, Fumes, and Particles. • The employee will be required to perform the following actions (from time to time): Standing, walking, balancing, stooping, kneeling, reaching, talking, seeing, hearing and sitting. • Ability to consistently lift over 50 pounds as needed. Preferred Experience: 3-5 years Required Education: High School Diploma or GED Equivalent Preferred Education: Technical training or AA degree in technical related field is desired.

Job DescriptionWelder / Fabricator NeededHey there! We are looking for a skilled Welder/Fabricator to join our client's crew.What You'll Be Doing: Reading blueprints and fitting up metal parts to spec Welding & fabricating components (stick, MIG, TIG-whatever the job calls for) Plasma cutting-yep, you'll be using a plasma cutter, so experience is a must Making sure everything is square, level, and meets quality before moving on Helping troubleshoot problems in fit-ups or welds when things don't go exactly like the drawings When needed, leading or helping others: prior lead/floor supervisor experience is a plus What We Need From You: Must be an early riser: 1st shift, 5:00 AM - 2:00 PM - if you like sleeping in, this isn't the one Solid plasma cutting skills Good with blueprints & fabrication fit-ups Detail oriented + pride in making things right (no cutting corners) If you've led a small team or run jobs before, even better Able to keep pace, safe, and with good stamina (fab work is physical) If you're ready to roll up your sleeves, get in early, and build something real - shoot me your resume or come by and let's talk. You might be exactly who we're looking for!Pay is DOE - $23/hour-$30/hour#ZR #TALROO

Journeyman Welder - 2500033H Description Build Your Career. Build America's Future.Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials, including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Safety. Take an active role in prioritizing safety for yourself and others throughout the operation at all times in accordance with MSHA and Vulcan standards. Inspect and Diagnose. Inspect and diagnose repair and maintenance of mobile and plant equipment. Plan Jobs. Plan, organize, weld, fit, and layout construction and repair jobs from blueprints. Fabricate structural components according to company standards. Fitting and welding according to blueprints. Welding. Stick and Dual Shield Welding. Weld materials in flat, vertical, and overhead positions. Cut materials using air arcs, burning rods, and acetylene/oxygen cutting torches to fit fabrication and job requirements. Perform welding repair and maintenance to stational production-related equipment, machinery, and structures such as conveyors, crushers, elevators, drives, and screws. Perform General Physical Activities. Perform physical activities that require moving your whole body and considerable use of your arms and legs, such as climbing, lifting, balancing, walking, stooping, and handling materials. Must have the ability to work at elevated heights. Problem Solving. Must be able to problem solve and make independent decisions regarding weld draws while fabricating and addressing other issues. Travel. In-state travel is required occasionally. Qualifications Skills You'll Need: Leadership. Provide leadership and coaching to other team members. Experience. 15 years of Fabrication Experience. Must have welding experience. Must be able to perform brazing, welding, arc welding, and cutting tasks. Functional Knowledge. Must have extensive knowledge of fitting, welding, and fabrication finishing accuracy. Flexibility. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is that the work we do impacts daily lives - and every employee contributes. The aggregates we produce are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs, and helping our employees meet their goals, as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters. Job: Plant Operations Primary Location: Alabama-Birmingham Organization: GM - SGD OH & SRV Schedule: Full-time Job Posting: Nov 19, 2025, 2:31:47 PM

Core Industrial Maintenance is looking for an experienced TIG Welder to join our talented team of skilled tradespeople. We are looking for someone that understands multiple different types of welding techniques and proper applications of those skills in an industrial setting. This position will require the Welder to work in a variety of environments and frequent travel to customer sites. - Perform welding and soldering tasks to join metal components together - Read and interpret blueprints to determine welding specifications - Assemble and fabricate metal structures using various welding techniques - Use rigging equipment and cranes to position and secure large metal pieces - Perform pipe threading and welding for plumbing and construction projects - Conduct inspections of welded joints to ensure quality and accuracy - Operate machinery and tools for cutting, grinding, and machining metal - Use calipers and other measuring instruments to ensure precise measurements Requirements - High School Diploma or Equivalent - Minimum of 3 years TIG Welding experience in an industrial setting - Knowledge of industry standard concepts, practices, and procedures

MiG/TiG Welder Automation Personnel Services is looking for a skilled MiG/TiG Welder for a company based in Jemison, AL. In this role you are primarily responsible for welding metal components using MIG and TIG welding techniques. This role requires precision, attention to detail, and a strong understanding of welding processes and safety protocols. Pay Rate $16.00 to $20.00per hour Depending on Experience Schedule and Hours Monday through Friday, 7 00 am 4 30 pm. MiG/TiG Welder- Duties and Responsibilities•Perform MIG and TIG welding on various metals, including stainless steel, aluminum, and carbon steel.•Read and interpret blueprints, schematics, and technical drawings.•Inspect welded joints and structures to ensure they meet quality standards.•Maintain welding equipment and tools in good working condition.•Follow safety protocols and guidelines to ensure a safe working environment.•Collaborate with other team members to complete projects on time.•Perform routine maintenance and repairs on welding equipment. MiG/TiG Welder- Qualifications and Requirements •High school diploma or equivalent.•Proven experience as a MIG/TIG welder or similar role.•Proficiency in MIG and TIG welding techniques.•Ability to read and interpret blueprints and technical documents.•Strong attention to detail and commitment to quality.•Physical stamina and ability to work in various positions (standing, bending, etc.).•Excellent communication and teamwork skills.•Certification in welding or related field is a plus. Job Type Full-time: Temporary to Hire Benefits • Weekly Pay • Medical, dental, vision, short-term disability, and life insurance • 40 Hours Service Bonus after 1 year of continuous service and 1500 hours • 6 paid Holidays after 1 year of continuous service and 1500 hours 401(k) Retirement Plan Automation Personnel Services is the only staffing agency specializing in manufacturing and industrial roles that offers 401K matching to all eligible contingent and temporary associates. Interested in this job? Click Apply Now, email your resume to aps Pelham@apstemps.com, or call us at 205.444.9774 to learn more. You can also apply in person at our office located at Automation Personnel Services Pelham Branch 2145 Pelham Parkway Pelham, AL 35214 Bonus Opportunity! We are also offering a $50.00 referral bonus. Both employee and referral must stay on assignment for 30 days to receive the payout. About Automation Personnel Services Automation Personnel Services is a highly recognized staffing agency with over 30 years of experience in manufacturing and light-industrial staffing. Our accolades include: • 10-time consecutive winner of the ClearlyRated Best of Staffing Client Award (2016-2025). • Winner of the ClearlyRated Best of Staffing Talent Award (2019-2025). • Recipient of the Safety Standard of Excellence Award by the American Staffing Association. • Named one of the Best Staffing Companies to Work For by CIO Views Magazine. • Consistently ranked among the top U.S. staffing agencies by Staffing Industry Analysts (SIA). Get that New Job Feeling! Apply Today!Equal Opportunity Employer APSPelham

The role involves building and fabricating components for bridges and barges. You will be responsible for welding, cutting, and fitting steel to create specific bridge parts according to project requirements. **Responsibilities** + Weld, cut, and fit steel components to fabricate bridge and barge parts. + Read and interpret blueprints to guide welding and fabrication tasks. + Utilize various welding techniques, including Flux Core, Mig, and arc welding, on structural and stainless steel. + Perform grinding and arc gauging of metal as required. **Essential Skills** + Proficiency in Flux Core welding on structural and stainless steel. + Ability to read and work off blueprints. + Experience with Mig welding. + Skill in grinding and arc gauging metal. **Additional Skills & Qualifications** + Experience in welding and fabrication of bridge components. + Familiarity with blueprint reading and interpretation. **Work Environment** The work environment involves working with steel and welding equipment. Safety gear and appropriate attire are required to ensure a safe and productive workspace. **Job Type & Location** This is a Contract to Hire position based out of Cordova, AL. **Pay and Benefits** The pay range for this position is $18.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Cordova,AL. **Application Deadline** This position is anticipated to close on Dec 16, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description Traveling TIG Welders - Journeyman Level - (Alabama) Pay Range: $24-$34/hour + Per Diem (TBD) United Trades of America is hiring Journeyman-level TIG Welders for projects across Alabama. Positions include new construction, shutdowns, and repairs. Candidates must have: Strong TIG welding skills Experience working with carbon and stainless steel OSHA 10 (minimum) or OSHA 30 certification Ability to pass verbal/written and hands-on tests Willingness to complete a pre-employment drug screen and background check Certification preferred. Apply now: *************************** Email your resume: *****************************

Job DescriptionSalary: $24-$30 Do you enjoy working in a stable work environment? Do you prefer routine and following a set process? Do you enjoy doing detailed, accurate work in a structured work environment, if so keep reading! Hardy Corporation has been providing mechanical services for over 80 years. Below are some of the skills, qualifications, and benefits of the position. This is not meant to be an exhaustive list of responsibilities, based on the job site objectives, competencies, and goals the skills needed will vary. ***This position requires an occasional commute to some local job sites in Birmingham AL ***All welding work is performed in our on-site fabrication shop. Travel to job sites is only as needed. CORE VALUES Trustworthy Team-Player Positive Work Ethic SKILLS The ability to adapt to the work environment (fast-paced environment, weather changes, small spaces, etc.) The ability to work independently, read labels, safety warnings, and guidelines The ability to receive and follow instructions from the supervisor and communicate with co-workers The ability to lift 50lbs or more Possess a strong attention to detail and alert to ensure all OSHA safety guidelines are being followed Possess the will to continuously learn QUALIFICATIONS -Must be able to pass a pre-employment drug screen and background check - 3+ years of experience as a pipe welder - Must be able to pass a 6G weld certification test - Must be able to weld in the following styles: MIG, TIG & STICK -The ability to travel (not optional) -A valid certificate in welding from an accredited institution is preferred - Experience piping with cooling towers, chillers, boilers, large roof top equipment -Weld small and large components such as copper plumbing, beams, and pipelines - Utilize hand tools, plasma cutters, and metal cutting machines to measure and cut metal components RESPONSIBILITIES -Maintain a clean and safe work environment and adhere to all OSHA safety protocols - Observes and complies with all safety and project rules, as well as all company policies and procedures - Must be detail-oriented, have a positive attitude, and be able to work as part of a team - Collaborate with team members to plan and prioritize work assignments - Set up, maintain, and operate welding equipment safely and efficiently - Assess welded surfaces, structures and components to identify errors - Follow and enforce strict safety regulations such as wearing heat-resistant gloves, protective masks, and safety shoes -Monitor machinery for appropriate usage and temperature -Weld components in flat, vertical, and overhead positions BENEFITS -Competitive Wages - Employer contributed Insurance packages offered - 401K Retirement Savings Plan with an Employer Match - Paid Time Off and Paid Holidays

Job Title: Structural Welder Job Type: Full-Time Schedule: 45-55 hours per week, with occasional Saturdays as needed Salary: $25-$28 per hour (DOE) Job Description: We are seeking a skilled Structural Welder to join our team in Birmingham. The ideal candidate will have hands-on experience in welding, cutting, and fabricating metal structures according to blueprints and technical specifications. You will work with a variety of metals and welding techniques to ensure high-quality results in compliance with safety standards. Key Responsibilities: Weld, cut, and fabricate metal structures and components based on blueprints and specifications. Utilize MIG, TIG, and Stick welding techniques on steel, stainless steel, and aluminum. Inspect materials and completed welds to meet quality standards and safety regulations. Read and interpret detailed technical drawings and schematics. Perform welding tasks in various environments, including construction sites and workshops. Maintain welding equipment and tools in proper working condition. Collaborate with project managers, engineers, and team members to meet project deadlines. Ensure all work follows safety guidelines and company procedures. Qualifications: Proven experience as a Structural Welder with a portfolio of completed projects. Welding certification (AWS, ASME, or equivalent) preferred. Proficient in MIG, TIG, and Stick welding processes. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and commitment to high-quality workmanship. Excellent problem-solving and troubleshooting skills. Ability to work in indoor and outdoor environments, including extreme weather conditions. Must have OSHA 10 certification. Strong safety awareness and adherence to safety protocols..

Job Details Pelham, AL Fully Remote Part Time Road Warrior AnyDescription This position is responsible to lay out, fit, fabricate, install and/or construct metal components to assemble structural forms using knowledge of welding techniques, metallurgy, and engineering requirements. RESPONSIBILITIES & EXPECTATIONS: What are the 5-8 major responsibilities/activities of the role and 2-3 major expectations attributed to each activity? 1. Welding • Weld parts in flat, vertical, and/or overhead positions • weld in all positions, vertical, horizontal • Evaluate all engineering drawings and ensure implementation according to welding specifications. • Perform all welding work with help of forming and cutting equipment. • Provide assistance to production process wherever necessary. • Design and produce new parts according to specifications. • Perform efficient welding of various metal objects. • Perform work with help of various hand and power tools. • Analyze diagrams and specifications and cut all metal accordingly with help of cutting equipment. • Evaluate finished products and perform quality checks on products. • Administer all welding activities in a safe and efficient manner. • Assemble old units and perform modification and repair work if required. • Collaborate work with metal sheets and apply various insulation materials. 2. Read Blueprints and/or Drawings • Use Welding material per provided drawings. • Communicate defects to manager. 3. Safety • Attend scheduled safety meetings. • Enforce all applicable safety policies. • Maintain a safe work environment • Promote safety among co-workers. • Participate in Behavior Based Safety program. 4. Power saws and portable grinders • Assist in use of portable grinder, hand file, and/or scraper as necessary • Use precision measuring tools to inspect grooves and angles 5. Other • All other duties as assigned. ATTRIBUTES: What are the Essential Knowledge/Skills/Abilities for this position? • Problem Solving - Ability to read blueprints • Must be capable of working any shift, overtime, be on-call, or work seven days a week and travel to customer sites • Must be able to multiple tasks with a strong sense of urgency to meet the customer needs. • Must be able to work well within a team environment and take instructions from management and co-workers. • Must be a self-starter with the ability to work independently • Must possess the basic reading and math skills • Strong record of attendance reliability • Safety Oriented with the ability to work well within a team environment. • Must be capable of performing the essential job duties required of this job Physical Demands include, but are not limited to: • Must be physically able to perform work assigned. • Must be physically capable of accessing all plant locations including working at heights. • Access all areas within a site which could include heights, confined spaces, climbing ladders or stairs, and accessing tunnels. • Will be working at times in covered environment or in an outside environment. • The employee will be exposed to the following working conditions: Extreme Heat and Cold, Noise, Vibration, Oils, and Atmospheric Conditions such as Dust, Fumes, and Particles. • The employee will be required to perform the following actions (from time to time): Standing, walking, balancing, stooping, kneeling, reaching, talking, seeing, hearing and sitting. • Ability to consistently lift over 50 pounds as needed.

Job DescriptionDescription: Core Industrial Maintenance is looking for an experienced TIG Welder to join our talented team of skilled tradespeople. We are looking for someone that understands multiple different types of welding techniques and proper applications of those skills in an industrial setting. This position will require the Welder to work in a variety of environments and frequent travel to customer sites. - Perform welding and soldering tasks to join metal components together - Read and interpret blueprints to determine welding specifications - Assemble and fabricate metal structures using various welding techniques - Use rigging equipment and cranes to position and secure large metal pieces - Perform pipe threading and welding for plumbing and construction projects - Conduct inspections of welded joints to ensure quality and accuracy - Operate machinery and tools for cutting, grinding, and machining metal - Use calipers and other measuring instruments to ensure precise measurements Requirements: - High School Diploma or Equivalent - Minimum of 3 years TIG Welding experience in an industrial setting - Knowledge of industry standard concepts, practices, and procedures