Welder fitter jobs in Wilmington, DE

and Job Description DME Fitter and Coordinator Job Summary: The DME Fitter and Coordinator will be responsible for fitting and maintaining the DME schedule for patient delivery. The coordinator will also be responsible for the care, authorization, and maintenance of the equipment and supplies, as well as the overall cleanliness of the fitting rooms. The coordinator will work with a team of MA's and billing staff to ensure that all patients receive the best care possible. Key Responsibilities: • Measure, schedule, and fit off-the-shelf orthopedic bracing. • Instruct patients regarding the use of orthopedic bracing products and other orthopedic devices. • Ordering products and maintaining inventory. • Check patient benefits and perform pre-certification for certain orthopedic products. • Communicate patient questions or concerns regarding orthopedic products with physicians and staff. • Communicate with product representatives and vendors regarding product complications or issues. • Complete special projects as assigned. • Perform duties of co-workers and subordinates as workload dictates. • Ensure all necessary documentation regarding payer requirements and standard operating procedures is obtained. • Perform patient/customer scheduling, education, order processing, delivery, and courtesy call back. • Comply with all HIPAA, Medicare, Medicaid, and other required programs. Procurement and insurance processing of DME. Job Requirements include: Certified Athletic Trainer (pending certification ok). Experience working in a DME provider's office, physician's office, rehab clinic or hospital, or similar role - preferred but not required. Excellent organizational and communication skills (verbal and written) Knowledge of DME protocols is recommended. Inventory Control Management. Requirements: • Must be able to work at different locations. • Ability to perform required physical requirements of the position (standing, sitting, walking, bending, squatting, etc.) as well as the required physical requirements of the position • Must have reliable transportation • Must have a valid driver's license and a clean driving record • Ability to lift 50 lbs. or more as needed by the patient • Ability to work in all weather conditions • Experience with medical bracing and DME preferred but not required

Job Description Pipe Welder Wanted APEX Mechanical & Fabrication is a leading provider of industrial piping services. Specializing in welding and installation projects for a wide range of sectors including construction, oil and gas, and manufacturing. We are currently seeking a highly skilled Pipe Welder to join our team. Responsibilities: Weld and fabricate pipe systems according to blueprints and specifications. Perform welding techniques such as TIG, MIG, Stick, and Flux Core. Ensure the integrity and quality of welded joints using appropriate inspection methods. Adhere to all safety protocols and industry standards during welding operations. Maintain tools, equipment, and a clean work environment. Collaborate with other team members to complete projects on time. Qualifications: Proven experience as a Pipe Welder or similar role. Proficiency in welding techniques (TIG, MIG, Stick). Ability to read and interpret blueprints and technical drawings. Strong attention to detail and problem-solving skills. Valid welding certifications (e.g., AWS, ASME) are preferred. Ability to work in various environments, including outdoors and in confined spaces. Ability to lift heavy materials and work in physically demanding conditions. Benefits: Competitive pay based on experience. Health, dental, and vision insurance. Paid time off and holidays. Opportunities for advancement and skill development. Safe and supportive work environment.

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal is looking for a Welder to join our team. This role will be on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday. at our Darrah St location. Responsibilities: Perform Welding Operations: Welding thin, light gauge nickel alloy & stainless steel metal (0.020 - .125in). Maintain Welding Equipment: Ensure welding equipment is in good working condition by conducting regular maintenance and repairs. Report any malfunctions or issues to the supervisor. Setting up a GTAW machine, including hookup to their own shielding gas cylinders Quality Control: Inspect welded joints and structures to ensure they meet quality standards and specifications. Ability to perform certain quality inspections on their own work through use of measuring tools, specifically calipers. Follow Safety Procedures: Adhere to safety protocols and guidelines to prevent accidents and injuries. Use personal protective equipment (PPE) and follow proper safety procedures during welding operations. Collaborate with Team: Work closely with engineers, fabricators, and other team members to complete projects efficiently and accurately. Communicate effectively to ensure tasks are completed on time and to specifications. Hands-on work: Roll-forming sheet metal. Comprehension of drawings: Reading, reasoning, and fabricating from blue prints, shop drawings, and standard work procedures. Requirements: Welding Experience: Minimum of 1 year of experience in welding operations, preferably in a manufacturing or industrial setting. Experience with various welding processes with sheet metal or comparable materials. Technical Skills: Proficient in reading and interpreting engineering drawings, blueprints, and welding symbols. Strong understanding of metallurgy and welding principles. Certifications: Possess relevant welding certifications such as AWS (American Welding Society) certification or equivalent. Additional certifications in specific welding techniques or materials may be preferred. Attention to Detail: Ability to work with precision and attention to detail to produce high-quality welds and assemblies. Familiarity with quality control techniques and inspection procedures is essential. Safety Awareness: Knowledge of safety protocols and procedures related to welding operations. Demonstrated commitment to maintaining a safe working environment for oneself and others. Teamwork and Communication: Excellent teamwork and communication skills to collaborate effectively with colleagues and convey information accurately. Physical Stamina: Ability to stand for extended periods, lift heavy materials, and work in various positions and environments. Good physical stamina and dexterity are required for welding tasks. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week (6:00AM-4:30PM M-Th) Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life to our employees and their families. Every day, we come together to build stronger relationships with our vendors, our customers, and each other, so we can solve challenging problems, and continue to improve the safety, quality, and efficiency of all that we do. Caring matters at R-V. We care for each other, our safety, our quality, our learning, and our growth. We seek out diversity of thought, experience, and strengths in individuals, so we can continue to innovate as a team. We believe when we bring our true full selves to serve others, it elevates the quality of life for all. GENERAL JOB DESCRIPTION A Welder/Fitter is required to safely prepare various alloys for fabrication processing, welding, and fitting. The Welder/Fitter is an individual contributor that requires little or no supervisory assistance and possess working knowledge of welding and fabrication technology and applications. Additionally, the Welder/Fitter will lead and engage RVII to achieve all assigned manufacturing goals: Safety (no one gets hurt), Quality (free of defect), On-Time Delivery (meet customer delivery dates), Budget (at or below estimated hours) and People (develop & retain “hungry, humble and smart” leaders). SKILLS/QUALIFICATIONS Demonstrated safety awareness and training in a construction/manufacturing environment Read measuring devices such as a tape measure to 1/64” • Follow verbal and written directions such as work order or drawings • Daily use of grinders, torches, plasma cutters, overhead cranes, and forklifts • May occasionally perform x-ray quality welds that are code compliant • Read and follow weld procedures, QC plans, and other work instruction documents • Safely setup and adjust welding machine and plasma cutting parameters • Read and interpret blueprints ASME code and AWS weld symbology • Layout and fit products as directed by drawing or process sheet • Create fixtures to safely hold part while being welded or cut • Perform basic NDE procedures (LPT and VT) as needed • Understand tolerances and general quality control principles and applications • Knowledge of welding principals and methods including but not limited to: SAW, FCAW, GMAW, and GTAW • 5+ years welding/fitting experience welding ASME Code pressure vessels • Welding with multiple processes in multiple positions as required EDUCATIONAL/PHYSICAL REQUIRMENTS • Must be able to complete and pass a physical assessment • Must be able to perform the essential functions of the job with or without accommodation • Formal training in Welding Technology or 3+ years of practical welding & fabrication experience. • Must be able to lift at least 50lbs and stand or sit for extended periods in an office and/or industrial environment. R-V Industries, Inc. is an equal opportunity employer. Day Shift Monday to Thursday from 6am to 4pm Night Shift Monday to Thursday from 4pm to 2am

Job Description Welder/Fitter A Welder/Fitter is required to cut and burn in relation to the fabrication process, fabricate, weld, and straighten all types of materials used in the company's fabrication and welding operation with little or no supervisory assistance in the shop. Education/Physical Qualifications: Knowledge of welding principals and methods including FCAW, GMAW, and GTAW Welding/fitting experience welding ASME Code pressure vessels is a plus Welding with multiple processes in multiple positions as required Must be able to complete and pass a physical assessment Must be able to perform the essential functions of the job with or without accommodation Every day repetitive wrist, hand or finger movement, involving gripping and wrist torqueing Every day standing, walking, bending, crouching, and stooping Everyday lifting 25 to 50 lbs Exposure to moving machinery, dust, dirt, grease, or other disagreeable elements Must have ability to hear emergency communications and alarms Skills/Qualifications: Demonstrated safety awareness and training in a construction/manufacturing environment Read a tape measure to 1/64” Follow oral and written directions Daily use grinders, torches, plasma cutters, overhead cranes, and forklifts May occasionally perform x-ray quality welds Read and follow weld procedures, QC plans, and other work instruction documents Setup and adjust welding machines and plasma torches Read and interpret blueprints and AWS weld symbols Lay and fit as directed by drawing or process sheet Create fixtures to hold part while being welded Perform basic NDE procedures (LPT and VT) Understand tolerances and the importance of maintaining them Benefits: Health / Dental / Vision Insurance 401k (company matches 25% up to 7%); Roth 401k options Company paid Life Insurance Vacation and Sick Leave Paid Holiday's Flexible Spending Accounts (FSA) Bereavement

WHO WE ARE Kinsley Construction is a full-service construction company committed to doing right by our people, right by our roots, and right by you. Operating throughout the Mid-Atlantic Region, we serve clients in a variety of industries. From Building, Civil, and Industrial construction, we do what it takes to get the job done and done right. If you want to leave your mark, take pride in what you do each day, and create something to show off to your family - then join ours. WHY KINSLEY CONSTRUCTION? Competitive salary and benefits package; including Single and Family Medical Insurance/Dental/Vision, Short/Long Term Disability, Life Insurance, 401K Plan with company match, (9) paid holidays, and up to (20) days PTO. Opportunities for career advancement and professional development. A collaborative and inclusive work environment. A company committed to safety, quality, and integrity in all projects. The chance to be part of a respected construction company with a long history of excellence. SUMMARY OF POSITION Kinsley is currently seeking personnel for our mechanical trades with experience in Millwrighting & Welding based out of our North East, MD Office. Our work includes machinery moving, complete facility relocate, plant maintenance, field fabrication, piping disconnects and reconnects, and installation of various material handling systems. TYPICAL RESPONSIBILITIES/ESSENTIAL FUNCTIONS Use instruments for precise layout. Perform rigging work including jacking, skating, heavy forklift operation and loading/unloading trucks. Perform steel erection including shake out, connections and detail work. Perform installation of miscellaneous metals Perform installation of conveyors, dryers, and other material handling equipment Perform installation of equipment and piping in Water and Wastewater Treatment Plants Field verify dimensions and perform field fabrication and fitting. Working at heights utilizing ladders, man lifts, etc. is required. Must be willing to work some weekends as needed for client shutdowns. Must be willing to travel for “out of town” jobs as needed and some will require overnight stay. REQUIREMENTS High school diploma or GED is required. 3-5 years of experience is preferred but not required. Ability to pass DOT pre-employment physical and drug/alcohol screening. Current driver's license is required. Ability to operate man lifts, forklifts, telehandlers, skid steer loaders, etc. is a plus. Must be familiar with or willing to learn OSHA and MSHA safety regulations. Must be familiar with working around cranes and hand signals. Willingness to multitask and strong communications skills are required. Strong math skills are essential. Welding with experience in MIG and stick welding in all positions is preferred. Previous work experience installing equipment in heavy industry and/or the mining industry is preferred. HOW TO APPLY If you are interested in a position at Kinsley Construction, please apply on our website at **************************************** or mail, fax, or email a resume including salary requirements to: KINSLEY CONSTRUCTION, LLC. PO BOX 2886 YORK PA 17405 ************ (Fax) ******************************* WE ARE AN EQUAL OPPORTUNITY EMPLOYER

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform layout work and all types of welding Work on large equipment and mobile equipment Assist in maintenance work Ensures compliance with all health, safety, and environmental regulations, and with company policies and procedures Must pass certification for 3G,4G What Are We Looking For High school diploma or GED required Minimum 2 years welding experience Must pass welding certification Able to use oxygen/acetylene torches Horizontal and Vertical, Overhead, and arc welding experience Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $29.49 per hour. Benefits through the Union for Medical, Dental, Vision, and Pension. Union paid vacation, sick leave, and holidays. Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Job Description Thompson First Group is seeking Welders for contract to hire positions with a local client in Clayton, DE. Candidates with experience welding in an industrial setting are encouraged to apply. This position reports to the Plant Manager or a Department Supervisor. The ideal candidate should possess knowledge of machines and tools including their design, uses, repair, and maintenance. Responsibilities: Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. Support the ISO 9001 Quality Management System and the Quality Policy calling for self-inspection of your work product. Reads blueprints. Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers. Drill and punch holes in metal, for screws, bolts, and rivets. Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items. Fabricate or alter parts at construction sites, using shears, hammers, punches, and drills. Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools. Operate safety equipment and use safe work habits. Weld components in flat, vertical, or overhead positions. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Will also use basic hand tools and grinder at times Detect faulty operation of equipment or defective materials and notify supervisors. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Performs other duties as assigned. Lifting production objects of up to 50lbs. Performs other duties as assigned. Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Requirements: Education: High school diploma or equivalent. Thompson First Group is an equal opportunity employer and participates in E-Verify. All applicants will be considered for employment regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law.

Welding of light gauge steel starting from reviewing layouts, blueprints, diagrams, and work orders, to the final inspection of the work piece.

Job Description Shop Welder | $25-$26/hr | Temp-to-Hire | Media, PA We're looking for a skilled Shop Welder to join a stable and supportive manufacturing team in Media, PA. This is a full-time, temp-to-hire position with consistent hours and long-term potential. ???? Schedule: Monday-Friday, 7:00 AM - 3:30 PM ???? Pay: $25-$26 per hour (based on experience) ???? Type: On-site | Temp-to-Hire What You'll Do Perform MIG and TIG welding on a variety of metal components Read and interpret blueprints and technical drawings Inspect welds for accuracy, strength, and quality Safely operate shop equipment and maintain a clean work environment What We're Looking For Proven MIG and TIG welding experience Ability to pass a hands-on welding test during the interview process Strong attention to detail and commitment to quality workmanship Reliability and a strong work ethic Physical Requirements Ability to stand for extended periods during shifts Capability to lift up to 50 pounds as needed Comfortable working with welding equipment, tools, and protective gear Ability to work in a shop environment with exposure to heat, noise, and metal materials Why Join Us? This role offers steady work, a supportive environment, and the opportunity to transition to a permanent position with a growing company. Apply today to be considered for this opportunity! Equal Employment Opportunity (EEO) Statement We are an Equal Opportunity Employer and value diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable law. IND123

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 / (251)385-0491 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads' capabilities enable our customers to achieve superior results by deploying our diverse, highly skilled workforce and fabrication capabilities across commercial, government and maritime projects, all backed by state‐of‐the‐art resources and a 100+ year legacy of leadership. As a member of the Rhoads team, you'll join a quickly growing team of energetic, skilled tradespeople and professionals who are committed to delivering exceptional products and services to our customers across every market we serve. We are building on our success across more than a century by continuing to grow an innovative company dedicated to building exciting careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex pipe spools and complex piping systems to work packages, drawings, PI&Ds per ASME B31.1 and MIL TP278, to production schedule under the guidance of the shop superintendent. What You Will Be Doing Perform pipe welding with pipe fitting experience using knowledge of codes and specifications Reads and deciphers work packages, work scope, engineered drawings, and PI&Ds Works with the pipe shop group with a focus on quality, customer compliance, and schedule Assemble piping spools, weld, test, and assure all shop packages are complete, and work is compliant before presenting to QA Assures welding equipment is in good working condition and reports any malfunctions or maintenance needed Have all personal gear to perform pipe welding and fitting including welding gear, measuring devices, levels square, etc. maintained in good condition Additional duties as assigned Your Background High school Graduate, related to Trade school and no less than 5 years' work history/experience in this industry required Have experience in GTAW processes. Must qualify to Pipe in the 6-G position Per ASME Section IX using the GTAW process. Experience in structural welding using GMAW in various positions to AWS D1.1. Proven past welding qualification history is a plus Decipher welding symbols, reads, and follows work packages, drawings, PI&Ds, and blueprints Use various measuring equipment Full range of mechanical knowledge as well as the ability to fabricate and install piping on equipment as specified on drawings and PI&Ds 5+ years of experience Able to work in a team environment and self-motivated. US Citizenship required Able to work overtime when needed Have all the necessary hand tools to perform their discipline and maintain in good working order Supply their own transportation to and from Rhoads Industries, able to work within the Navy Yard and other job sites at times when requested OSHA /10 safety training required provided by Rhoads, having an up-to-date OSHA/10 a plus Experience in MIL work Per TP278 and past qualifications to TP248 is a plus Various shifts may be required, including overtime and weekends The Work Environment at Rhoads The performance of this position involves exposure to construction or industrial areas where the use of personal protective equipment such as safety glasses, hard hats and hearing protection is required. What Rhoads Can Offer You At Rhoads Industries, our team is the foundation of our success. Along with a competitive salary, we offer a variety of additional benefits designed to support your well-being and promote a healthy work-life balance for you and your family. Benefits include: Competitive health insurance packages 401k matching PTO Our Location We are based out of The Navy Yard in Philadelphia, a reimagined industrial locale with more than 150 companies, 15,000+ people, 20 acres of parks, dining options, public art, and events throughout the year. Recognized as a leading model for repurposing military and industrial assets for a diversified modern economy, The Navy Yard has been dubbed “the coolest shipyard in America.” For more information about Rhoads Industries and our opportunities please visit RhoadsInc.com and follow us on LinkedIn. Rhoads Industries, Inc. is an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, and disability.

Job Description: Welder: Shift: 6 AM - 2:30 PM: Responsible for preparing and welding aftermarket custom exhaust components. Strong communication and math skills. Good interpersonal skills with the ability to communicate and interface positively with other team members and departments. Must be able to stand for the duration of the shift and able to lift up to 50lbs unassisted. Conduct quality workmanship, attention to detail and customers' satisfaction. Ability to read and comprehend blueprints. Practice safe work habits, follow safety guidelines, and support company safety initiatives. Perform daily organization and cleanup of work area. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Job Description Join Our Team: Shop Welder & Fabricator At Precision Hydraulics, we pride ourselves on being at the forefront of the waste equipment industry, offering top-notch retail and industrial equipment repair and maintenance services. We are currently looking for Welders and Fabricators to join our team to repair balers, compactors, and other industrial equipment at our Norristown, PA based shop. This role involves working on hydraulics, basic electrical operations, and welding fabrication to ensure safe and efficient site operations. **Minimum Requirements: ** 1. High School Diploma or G.E.D. 2. 1-2 years of experience in compaction maintenance and repair 3. Proficiency with basic and advanced hand tools 4. Ability to lift up to 50 pounds, climb ladders, and possess a mechanical background 5. Valid Fit-Test certification 6. Reliable transportation is required. **Essential Functions: ** -Conduct inspections, diagnostic tests, preventative maintenance, and repairs on various types of compactors and stationary equipment - Read electrical schematics and diagnose/repair electrical issues using single and three-phase AC voltage, including high-voltage electricity - Read hydraulic schematics and diagnose/repair hydraulic issues - Maintain knowledge of proper installation procedures for compactors and other stationary equipment - Perform or assist with installations, ensuring deadlines are met - Execute welding and fabrication tasks as needed - Accurately complete paperwork and enter data related to equipment repairs in a timely manner - Adhere to all safety policies and procedures - Perform other job-related duties as assigned **Company Culture: ** Our culture is described as customer service oriented, competitive, and growth oriented. Benefits include: Retirement Plan with Company matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Vision insurance Safety Incentive Program **Work Details: ** - Type of work: Other - Work Location: Fabrication Shop - Open to applicants without a college diploma - Remote work: No - Job Type: Full-time - Pay: $22.00 - $28.00 per hour

Join Our Team: Shop Welder & Fabricator At Precision Hydraulics, we pride ourselves on being at the forefront of the waste equipment industry, offering top-notch retail and industrial equipment repair and maintenance services. We are currently looking for Welders and Fabricators to join our team to repair balers, compactors, and other industrial equipment at our Norristown, PA based shop. This role involves working on hydraulics, basic electrical operations, and welding fabrication to ensure safe and efficient site operations. **Minimum Requirements: ** 1. High School Diploma or G.E.D. 2. 1-2 years of experience in compaction maintenance and repair 3. Proficiency with basic and advanced hand tools 4. Ability to lift up to 50 pounds, climb ladders, and possess a mechanical background 5. Valid Fit-Test certification 6. Reliable transportation is required. **Essential Functions: ** -Conduct inspections, diagnostic tests, preventative maintenance, and repairs on various types of compactors and stationary equipment - Read electrical schematics and diagnose/repair electrical issues using single and three-phase AC voltage, including high-voltage electricity - Read hydraulic schematics and diagnose/repair hydraulic issues - Maintain knowledge of proper installation procedures for compactors and other stationary equipment - Perform or assist with installations, ensuring deadlines are met - Execute welding and fabrication tasks as needed - Accurately complete paperwork and enter data related to equipment repairs in a timely manner - Adhere to all safety policies and procedures - Perform other job-related duties as assigned **Company Culture: ** Our culture is described as customer service oriented, competitive, and growth oriented. Benefits include: Retirement Plan with Company matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Vision insurance Safety Incentive Program **Work Details: ** - Type of work: Other - Work Location: Fabrication Shop - Open to applicants without a college diploma - Remote work: No - Job Type: Full-time - Pay: $22.00 - $28.00 per hour

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off About the Role: Join United Plastics Machinery LLC as a Welder Fabricator and become an integral part of our innovative manufacturing team in Exton, PA. We are looking for skilled individuals who are passionate about precision welding and fabrication to help us deliver top-quality machinery solutions to our clients. Responsibilities: Perform welding on various materials including steel. Read and interpret blueprints and technical drawings to execute fabrication tasks accurately. Assemble and fit components according to specifications to ensure structural integrity. Conduct quality inspections on finished products to ensure adherence to industry standards. Maintain a clean and safe working environment by following safety protocols and regulations. Collaborate with team members to optimize production processes and improve efficiency. Utilize hand tools and welding equipment effectively to complete projects on time. Requirements: High school diploma or equivalent; vocational training in welding preferred. Minimum of 2 years of welding experience in a manufacturing environment. Proficient in welding techniques with a strong attention to detail. Ability to read and understand technical drawings and blueprints. Strong problem-solving skills and a proactive approach to work. Excellent communication and teamwork abilities. Willingness to comply with safety standards and regulations. About Us: United Plastics Machinery LLC has been a leader in the equipment manufacturing industry for over 50 years, known for our commitment to quality and innovation. Our customers appreciate our tailored solutions and exceptional service, while our employees enjoy a collaborative and supportive work environment that fosters growth and development.

MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients. Job Description Position summary: use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Qualifications · Demonstrated experience as a professional welder. · Ability to strictly adhere to all safety standards. · Demonstrated ability to accept and follow instructions from others. · Willingness and ability to work cooperatively with others. · Strong knowledge of welding equipment, materials, etc.. · Must successfully complete pre-access drug and alcohol testing. · Must have a valid driver's license. Additional Information · Weld components in flat, vertical, or overhead positions. · Operate safety equipment and use safe work habits. · Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. · Measure dimensions of completed products or workpieces to verify conformance to specifications. · Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. · Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. · Select production equipment according to product specifications. · Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. · Monitor equipment operation to ensure that products are not flawed. · Review blueprints or other instructions to determine operational methods or sequences. · Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. · Clean workpieces or finished products. · Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. · May perform other related duties as assigned. Must have, or be able to obtain, OSHA 10 certification.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR sCkIDpzNuh