Welder jobs in Florida - 385 jobs

We're looking for Welders with aluminum welding experience who are excited to grow their careers while supporting critical energy infrastructure projects across the U.S. This hands-on field role offers the opportunity to work on a wide variety of job sites, including power plants, hydroelectric dams, and large-scale industrial facilities. You'll focus on systems such as Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers, and will be part of a fast-growing team that takes pride in safety, quality, and craftsmanship. What You'll Do: Weld aluminum components in multiple positions (vertical, horizontal, overhead - 6G test required) Read and interpret construction, welding, and electrical drawings Rig, lift, align, and set electrical bus duct equipment based on plans and specifications Demo, fit, and install new mechanical components as part of system upgrades Maintain tools and welding equipment in a safe, working condition Conduct safety checks and inspections; identify and address wear, defects, and deterioration Operate electrical testing equipment, including Hi-Pot, Ductor, and Megger Work effectively alongside field technicians, project teams, and other trades Complete daily job reports and timesheets Operate company vehicles and follow RMS Energy's safety and driving policies Follow strict safety and PPE usage protocols due to noise, electrical hazards, and elevated work areas Take initiative and work independently with minimal supervision The Experience We're Looking For: 3+ years of aluminum welding experience (MIG required, TIG preferred) Familiarity with medium and high voltage electrical equipment Ability to read and interpret technical drawings and field documentation Knowledge of OSHA safety standards, including PPE use and working at heights Experience with substation construction or electrical bus installation is preferred Proficient in operating forklifts, manlifts, and other field equipment Additional Requirements: Willingness to travel up to 75% across the continental U.S. High school diploma or GED required Valid driver's license Must pass a background check and drug/alcohol screening Legally authorized to work in the United States Available for extended and irregular hours as needed Able to work outdoors in all weather, at heights (100+ ft), in confined spaces, and around high-voltage equipment and heavy machinery Physically capable of lifting 50+ lbs and enduring extended physical activity Requires good vision, hearing, and English proficiency for safe, effective communication in noisy environments Bonus Points for: Completion of a trade school program, technical college, associate degree, or skilled trade certification in welding or a related field is strongly preferred TWIC Card CDL License Prior experience working with Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers Why Join RMS Energy: We're not just another power services company. We're a tight-knit, mission-driven team that values safety, teamwork, innovation, and continuous growth. Competitive Compensation - Overtime potential and merit-based raises Full Benefits - Medical, dental, and vision coverage fully paid for employees, starting the month after hire Steady Employment & Career Growth - Be part of a fast-growing company with promotion potential 401(k) with Company Match - Traditional & Roth options + free investment guidance Top-Tier Equipment - Provided to support you in the field Compensated Travel Time plus Per Diem - Earn while seeing new places Education Support - Paid training, certifications, and industry memberships Generous PTO - Paid vacation, holidays, and sick leave Employee Assistance Program - Legal, financial, and mental wellness support Want to be part of something meaningful? Apply today and join a team where People, Purpose, and Power come together - your future starts here. RMS Energy is an Equal Opportunity Employer. We believe diverse teams drive better outcomes, and we're committed to creating an inclusive environment where all employees feel valued and empowered. For more information about RMS Energy, please visit ******************

Night Shift starting at $19.82!48-Hour Work WeekMonday- Thursday 4:30 pm - 4:30 am Overtime available Double Time After 50 hrs. Worked!*Train on 1st Shift (5am-4:30pm) At Veritas Steel, were leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? Join the Veritas Steel team today! Welders employed at Veritas Steel's Palatka location are responsible for performing FCAW & SMAW processes to codes, and standards, including repairs and miscellaneous tasks as assigned by Shop Supervisor. They must be able to meet high production demands in a timely manner and complete high-quality work with expertise. Welders must also adhere to company policies to ensure a safe working environment. Principle Duties and Responsibilities: Uses proper safety equipment to ensure surfaces are adequately prepared for all operations:Air arc, Grove Welds, Flex Core, Full PinUsing correct procedures to obtain proper weld profile, etc.,Understands general knowledge of welding codes and welding tools Proper preparation, cleaning, and setup Hand torch setup and use Understand basic weld symbols/gauges Maintains shop, equipment, tools, vehicles, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety Coordinates with shop supervisor and other personnel for the purpose of completing projects/work orders efficiently, on time, and with no defects Adheres to safety policies to ensure a safe working environment for oneself and surrounding coworkers Knowledge, Skills, & Abilities:High School diploma or GEDMust be able to read, write, and comprehend EnglishNeed to be able to read metric tapes Able to adapt to work priorities, communicate well, meet deadlines and schedules, and work as part of a team Commitment to work safety and actively participating in our safety culture Commitment to attendance policy and procedures Quality, accuracy, thoroughness, and reliability of work performed Willingness to learn and contribute to the success of your team Welding experience is preferred but not required Physical Requirements:Able to lift 40 pounds and carry 30 pounds Must be able to push /move objects up to 50 pounds of force Pulling requirements up to 122 pounds of force Necessary to stand, walk, stoop, and kneel up to 99% of the shift Must have a good range of motion when reaching forward, shoulder to overhead, and bending Agile fingers and thumbs on both hands Working Conditions: Work is performed indoors in a large warehouse or outside in all weather conditions There is regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel & other possible hazardous conditions Safety glasses, hearing protection, hard hats, and steel-toed boots are required; a respirator is required for specific operations Compensation details: 18.72-22.16 Hourly Wage PIc63dd01558e1-31181-39493829

St Johns Ship Building, Inc. is a full-service shipbuilding and marine repair company that specializes in new construction and repair of commercial aluminum and steel vessels. Operations are conducted in a storm-protected 100-acre inland campus in the city of Palatka just 30 miles southwest of Jacksonville on the St. Johns River that provides direct access to the Atlantic Ocean. We are committed to providing top quality craftsmanship and personalized service by delivering vessels on time and on budget. Position Summary As an Aluminum Welder, you will use hand-welding or flame-cutting equipment to weld or join metal components, to fill holes, indentations, or seams of fabricated metal products. This position will be responsible for welding components of the ship and completing repairs or new builds on time, to specifications, and within scope of the project. Completes all the required company training and follows all company policies and procedures. Responsibilities Operate safety equipment and use safe work habits. Weld components in flat, vertical, or overhead positions. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Detect faulty operation of equipment or defective materials and notify supervisors. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Lie out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. Fill holes and increase the size of metal parts. Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. Gouge metals, using the air-arc gouging process. Guide and direct flames or electrodes on or across work pieces to straighten, bend, melt, or build up metal. Preheat work pieces prior to welding or bending, using torches or heating furnaces. Use fire suppression methods in industrial emergencies. Set up and use ladders and scaffolding as necessary to complete work. Hammer out bulges or bends in metal work pieces. Qualifications Six months to one-year related experience Must pass AWS certification within the first 60 days on the job High School Graduate or General Education Degree (GED) Accountability - Ability to accept responsibility and account for his/her actions. Accuracy - Ability to perform work accurately and thoroughly. Autonomy - Ability to work independently with minimal supervision. Detail Oriented - Ability to pay attention to the minute details of a project or task. Organized - Possessing the trait of being organized or following a systematic method of performing a task. Resource Management (People & Equipment) - Ability to obtain and appropriate the proper usage of equipment, facilities, materials, as well as personnel. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Technical Aptitude - Ability to comprehend complex technical topics and specialized information. Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience. Communication, Oral - Ability to communicate effectively with others using the spoken word. Judgment - The ability to formulate a sound decision using the available information. Reliability - The trait of being dependable and trustworthy. What We Have to Offer You Starting pay is $18+ per hour, based on experience. Medical, Dental, and Vision Cost Savings and Worksite Benefits Company paid Medical Gap Insurance Company paid Short Term Disability Company paid Basic Life and AD&D Company Match 401K Paid holidays Personal and Vacation time PHYSICAL DEMANDS Physical Demands Lift/Carry Stand C (Constantly) Walk C (Constantly) Sit O (Occasionally) Handling / Fingering C (Constantly) Reach Outward C (Constantly) Reach Above Shoulder C (Constantly) Climb F (Frequently) Crawl F (Frequently) Squat or Kneel F (Frequently) Bend F (Frequently) 10 lbs or less F (Frequently) 11-20 lbs F (Frequently) 21-50 lbs F (Frequently) 51-100 lbs N (Not Applicable) Over 100 lbs N (Not Applicable) Push/Pull 12 lbs or less F (Frequently) 13-25 lbs F (Frequently) 26-40 lbs F (Frequently) 41-100 lbs F (Frequently) N (Not Applicable) Activity is not applicable to this occupation. O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements Vision (Near, Distance, Peripheral, Depth Perception) Sense of Sound (hear alarms and radios) Sense of Touch Ability to wear Personal Protective Equipment (PPE) (safety glasses, hard hats, steel toed shoes, gloves) WORK ENVIRONMENT Outdoor Environment, Excessive Heat, Excessive Cold St Johns Ship Building is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

About Us At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. Overview The Welder will be welding Carbon Steel Pipe of all sizes. Responsibilities Welds together components of products specified by layout, blueprints, diagram, and work order, welding procedures or oral instructions. Sets controls on welding machine in conformance with WPS. May weld in flat, horizontal, vertical, or overhead positions as qualified. Must be able to read a tape measure. Tack assemblies together using approved WPS. Adheres to all company health, and safety policies. Work in a safe manner. Maintain a clean and organized workspace. Qualifications Required Education, Experience, and Qualifications Welds together components of products specified by layout, blueprints, diagram, and work order, welding procedures or oral instructions. Sets controls on welding machine in conformance with WPS. May weld in flat, horizontal, vertical, or overhead positions as qualified. Must be able to read a tape measure. Tack assemblies together using approved WPS. Adheres to all company health, and safety policies. Work in a safe manner. Maintain a clean and organized workspace. Must be qualified under AWS D1.1 code for Overhead (4G) and Vertical (3G) using SMAW Must pass welding test. Experience working with stainless and carbon steel. Experience working with overhead cranes. High school diploma or equivalent. Must be able to lift up to 50 lbs. Must be able to understand fractions, decimals, and degrees of a circle. General knowledge of structural members ( beams, channel, angle, pipe, and tubing Preferred Education, Experience, and Qualifications OSHA 10 or 30 hour preferred Travel Requirements 5-10% of time will be spent traveling to job site(s)/office location. Physical Activities Climbing stairs. Operating machinery and/or power tools Remaining in a stationary position, often standing or sitting for prolonged periods Environmental Conditions Noisy environment Physical Demands Medium work that includes adjusting and/or moving objects up to 50 pounds Pay Range USD $24.28 - USD $32.41 /Hr. ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

Job Title: Welder II FLSA: Non-Exempt Reports To: Manufacturing Supervisor / Manufacturing Manager / Plant Director Job Category (EEO Description): Craft Workers Job Code (EEO Code): 6 Job Family: Special Trade Affirmative Action Job Group and Description: II > 6A Craft Workers: Senior / Mid SUMMARY: Title and responsibilities will be determined in a progressive manner based on skill and expertise within the same job group. Job consists of various types of weld preparation, welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction. Embraces and executes the Company Core Values. Actively supports the Companys vision and goals. ESSENTIAL DUTIES AND RESPONSIBILITIES: Includes the following; other job duties will be assigned in a progressive manner. Welding of tanks and components from mechanical drawings, blueprints and written specifications. Interpretation of weld requirement. Knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials. Holding weld quality to set criteria, checked by x-ray and penetrant inspection. Holding dimensional tolerances per blueprints. Other duties may be assigned. Working knowledge of fixturing and weld set ups. Conventional and precision measuring instruments. Process inspection, certification, and documentation. Welding equipment maintenance. Adheres to requirements of ISO 9001 and maintains procedures and work instructions to satisfy these requirements. Active participation in 6s, lean initiatives, continual improvement, and any other program deemed necessary by management. Proficient in welding stainless and aluminum. Also, must be able to fusion weld, spot weld and/or braze. Duties will also include cleaning parts for welding. SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities; however all team members are expected to self-supervise to ensure the Companies Continual Improvement philosophy and Core Values are maintained. QUALITY RESPONSIBILITIES: In daily work, a team member is responsible to maintain or exceed the degree of excellence requested by the internal and external customers of this department. This includes following established policies, following ISO 9001 & 14001 policies, business practices, and work instructions, using problem solving techniques to solve root causes of problems, and viewing quality as customer satisfaction. Shaw Development expects all team members to take pride in their work, in our company and appearance. QUALIFICATIONS: Proficient in assigned welding techniques, TIG welding for stainless and aluminum fabrication. An individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. CORE COMPETENCIES: Welder II 1. Strategic Skills a. Functional and technical skills b. Problem solving c. Learning on the fly 2. Operating Skills a. Time management b. Informing 3. Energy and Drive a. Action oriented 4. Personal and Interpersonal Skills a. Approachability b. Peer relationships c. Boss relationships d. Ethics and values e. Integrity and trust EDUCATION and/or EXPERIENCE: Formal welding training through vocational school or apprenticeship program. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers and the general staff. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the team member is regularly required to talk or listen. The team members frequently is required to walk and sit. The team member is occasionally required to stand; use hands to finger, handle, or feel; reach with hands and arms; and use hands to fingers to write, operate a computer keyboard, mouse and telephone keypad. The team member must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 35 pounds. Specific vision abilities required by this job include vision, and distance vision. WORK ENVIRONMENT: Promote a working environment that provides a clean, orderly and safe facility for all team members so that we may perform, develop and exceed the contributor status. The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the team member is frequently exposed to moving mechanical parts. The team member is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. An Equal Opportunity Employer/Vet/Disability PI92244aef6a8e-31181-39470560

Our client is looking for First Class Welders to work at their Jacksonville facility. This is a full-time temp to hire position. Hours: Days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Summary/Objective Capable of performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. Willingness to cross train for multi-function structural and piping assembly processes Essential Functions Fluent in understanding job specific WPS / PQR's and capable of setting machine up for performance in all positions to certified testing criteria. Analyze blueprints for welding insignia and the application thereof to assembly components on piping and structural systems. The ability to identify correctly, measure, hand dress, cut and fit prepare metal surfaces for welding process to be completed per job specific requirements. Capable of visual observation of pre- and post-welded surfaces; and the interpretation of fulfilled job requirements with micrometer, caliper, and other precision measuring instruments. Technically proficient in the interpretation of insufficient weld criteria and knowledge to efficiently blend to repair. Strong mechanical aptitude and problem solver who can understand and follow instruction. Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations. Operate overhead cranes and or forklifts. Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Competencies Collaboration Skills Reliable Attendance Decision Making Leadership Communication proficiency written and verbal Ethical Conduct. Problem Solving Organizational Skills Thoroughness Time Management Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Required Education and Experience Basic math and language skills required. Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting. Related experience or training. Preferred Education and Experience 6+ Years' experience in Welding SMAW, FCAW and GTAW, or a combination. 2 years vocational technical training. Additional Eligibility Qualifications Must have dependable transportation, valid driver's license, clean back-ground check and random drug screening consent. Job Type: Full-time Pay: $22.00 - $28.00 per hour Shift: 8-hour shift Day shift Application Question(s): Are you willing to take a drug test? Do you have a clean background, and can we run a background check? Experience: Precision measuring instruments: 6 years (Required) ISO 9001: 3 years (Required) TIG welding: 6 years (Required) Stick welding: 6 years (Required) License/Certification: Driver's License (Required) Ability to Relocate: Jacksonville, FL: Relocate before starting work (Required) Work Location: In person

Are you looking to join Florida's fastest growing mechanical contracting team? B&I Contractors, Inc., a proud four-time winner of the Great Place to Work certification, is seeking an experienced and dedicated Pipe Shop Fabricator Welder 2nd shift to join our dynamic and expanding team. Why Choose B&I Contractors, Inc.? * Industry Leader: As Florida's fastest growing mechanical contractor, we specialize in large-scale commercial projects. * Continuous Development: Benefit from our NCCER-certified in-house and online training that equips you with the skills needed to advance in your career. * Comprehensive Benefits: Enjoy employer-paid health insurance, accrued vacation, and sick time, along with a wellness reimbursement program to support your overall well-being. * Retirement Benefits: We are a 100% employee owned company with an ESOP. You can also participate in our 401(k) plan with company match and explore post-tax Roth IRA options to secure your financial future. * Established Legacy: Join a team of over 1000 employees contributing to our success since 1960, with a proven track record of excellence in mechanical contracting. Key Responsibilities * Fabricate and weld metal components according to blueprints and specifications. * Operate various tools and equipment such as plasma cutters, iron worker, and hand tools. * Assemble fabricated parts using various techniques. * Read and interpret schematics and diagrams. * Perform quality checks to ensure finished products meet specifications. * Maintain a clean and organized work area. Qualifications * Previous experience in fabrication and welding. * Proficient in the use of hand tools. * Basic math skills for measurements and calculations. * Ability to read and interpret technical drawings and schematics. * Knowledge of different welding techniques including stick welding. * Must be willing to work 2nd shift hours Monday through Friday 3:00 pm - 11:30 pm. * Familiarity with operating overhead cranes or other lifting equipment is a plus. * This position requires the ability to lift and carry materials weighing up to 50 pounds on a frequent basis. The employee must be able to perform tasks involving physical labor, including lifting, pushing, pulling, and carrying materials, tools, or equipment. Manual material handling must be performed in accordance with OSHA safety standards and company policies to minimize risk of injury. * Esta posición requiere la capacidad de levantar y transportar materiales de hasta 50 libras de manera frecuente. El empleado debe poder realizar tareas que involucren trabajo físico, incluyendo levantar, empujar, jalar y transportar materiales, herramientas o equipo. El manejo manual de materiales debe realizarse de acuerdo con los estándares de seguridad de OSHA y las políticas de la compañía para minimizar el riesgo de lesiones. Ready to grow your career with a respected, employee-owned leader in mechanical contracting? Apply now and be a part of something built to last. B&I Contractors is committed to maintaining a safe and productive work environment. We are a drug-free workplace.

PIPE WELDER ESSENTIAL FUNCTIONS: * Welding in and out of position on various pipe configurations using SMAW and FCAW welding processes. * Work closely with supervisors and pipe fitters to provide solutions to design deficiencies, system breakdowns, equipment malfunctions and other repair situations. * Tear down/repair/repack/reassemble valves in place. * Assess and repair reach-rods, deck actuators, valve handles, valve bodies and bonnets. * Repair sanitary systems aboard vessels. * Work with systems aboard vessels for fresh/potable water. * Work with engine cooling systems. * Repair or renew various other pieces of equipment as warranted. KNOWLEDGE, SKILLS AND ABILITIES: * Successfully pass a 6GR Pipe Welding Test using SMAW and FCAW. * Stainless Steel 6GR Pipe Welding Test will be SMAW. * Follows ABS / USCG pipe welding and fitting requirements * Assist in all types of valve, reach rod, heat exchanger or other miscellaneous mechanical work * Will work independently with minimal supervision * Conflict management, leadership, teambuilding and time management skills will be used * Attention to detail, organizational, problem solving, analytical, critical thinking and decision making skills will be used EDUCATION AND EXPERIENCE: * High School Diploma or Equivalent * Two (2) years of pipe welding experience * Must have tools; employer does not provide tools * Shipyard Experience is preferred WORK ENVIRONMENT: Outdoors. Work in confined spaces, in the elements, aboard shipyard vessels, in the shop, and travel outside the facilities to other local ports in the area via company truck. HOURS: 40+ hours per week. E-Verify and Drug-Free Workplace LOCAL CANDIDATES PREFERRED, as relocation expenses are NOT covered. Benefits * Two medical plans * Two dental plans * Vision plan * Short-term and long-term disability insurance plans * Company provided life insurance * Employee elected supplemental life insurance for employees and family * Employee Assistance Plan * Work-site Benefits * 401(K) plan with company match Gulf Marine Repair is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, and we consider all qualified individuals without regard to legally protected characteristics. Location: 33605

Labor One is hiring TIG Pipe Welders for a shipyard in Florida . Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 or (251)385-0491 *Please send us a text if we don't answer* POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Complete welds to the specified standards using appropriate equipment and materials. Install and verify operation of high-pressure steel pipes and fittings. Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipes and/ or similar tubular products. Test installed piping systems and install other related items in accordance with the applicable plans and specifications. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Troubleshoot equipment. Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. Work with minimal supervision. Perform other duties as assigned. REQUIREMENTS Education/ Experience: High school diploma or GED equivalence plus three to five years of pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of the safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/ adaptability, initiative, interpersonal skills, attention to detail, safety consciousness, and multitasking. Maintain the confidential integrity of details pertaining to shipyard. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstanding extreme heat and cold in an outside climate or confined space. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

This is a general description of the essential job functions and is not intended to be an employment contract. Eastern Shipbuilding Group, Inc. maintains its status as an at-will employer. Position requirements, skills, and abilities included in this have been determined to be the minimal standards required to successfully perform the position. Eastern Shipbuilding Group Inc. reserves the right to increase, waive or reduce these minimal standards. In no instance, however, should the duties, responsibilities, and requirements described be interpreted as all-inclusive. All employees of Eastern Shipbuilding Group, Inc. are expected to perform the duties as assigned by Eastern Shipbuilding Group, Inc., supervisory/management personnel, regardless of job title or routine job duties. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. To perform this job successfully, an individual is expected to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability expected. In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. However, no accommodation will be made which may pose serious health or safety risks to the employee or others or which imposes undue hardship on Eastern Shipbuilding. POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because Eastern Shipbuilding is continually growing to meet the needs of our customers; the essential duties and responsibilities may be different than described. * Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. * Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. * Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. * Complete welds to the specified standards using appropriate equipment and materials. * Install and verify the operation of high-pressure steel pipes and fittings. * Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. * Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipes and/ or similar tubular products. * Test installed piping systems and install other related items in accordance with the applicable plans and specifications. * Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. * Troubleshoot equipment. * Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. * Work with minimal supervision. * Perform other duties as assigned. * Successfully pass a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG. * Successfully pass a 6G (6" weld coupon) Carbon Stell - root and cap. SUPERVISORY RESPONSIBILITIES May indirectly supervise and/or train subordinates. REQUIREMENTS Education/ Experience: High school diploma or GED equivalence plus three to five years of pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety conscious, and multitasking. Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstanding extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. We are equal opportunity/affirmative action employers, committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status, or any other protected characteristic under state or local law.

Working Title: OPS ALUMINUM WELDER - 42902825 Pay Plan: Temp 42902825 Salary: $18.00 Hourly Total Compensation Estimator Tool OPS ALUMINUM WELDER FLORIDA DEPARTMENT OF AGRICULTURE AND CONSUMER SERVICES FLORIDA FOREST SERVICE * OPEN COMPETITIVE OPPORTUNITY -- THIS IS A FULL-TIME OTHER PERSONAL SERVICES (OPS) POSITION* CONTACT: Karen Mathis, ************** MINIMUM REQUIREMENTS: One (1) year of aluminum and/or steel welding or mechanical installation experience. Vocational/technical training in welding can substitute at the rate of 720 classroom hours for the required experience provided such training includes MIG welding, Arc welding or TIG welding. Requires possession of a valid Class E driver license. * ATTENTION CANDIDATES* To be considered for a position with the Florida Department of Agriculture and Consumer Services: * All fields in the Candidate Profile must be completed (an attached resume is not a substitution for the information required on the candidate profile). * Work history, duties and responsibilities, hours worked, supervisor, and formal education fields, etc. must be filled out to determine qualifications for this position. * Responses to Qualifying Questions must be verifiable in the Candidate Profile. The Florida Department of Agriculture and Consumer Services values and supports employment of individuals with disabilities. Qualified individuals with disabilities are encouraged to apply. ADDITIONAL REQUIREMENTS: Occasional to moderate travel required. Position may respond to emergencies, including natural disasters or other type incidents requiring travel, as needed. NOTES: To maintain fairness and integrity in our hiring process, the use of Artificial Intelligence (AI) tools to answer qualifying questions or participate in interviews is strictly prohibited. Applicants must provide their own, authentic responses during all stages of the evaluation and recruitment process. Any candidate found using AI to assist in their answers will be disqualified from consideration. The anticipated hiring salary for this position is $18.00 hourly. JOB DUTIES: * Preheats and cleans aluminum, cuts, and fits component parts of manufacturing jobs in preparation for welding. * Performs the duties of cutting aluminum tubing and welding various types of sign structures and any other aluminum manufacturing jobs. * Fabricates special safety devices for construction and maintenance equipment. * Manufactures items such as eye bolts, braces, angle brackets, and similar items. * Assists in loading completed sign structures and unloading and placing shipments of incoming aluminum in racks. * Maintains and makes minor repairs to welding equipment. * Performs related work as required. * Weld steel, if required * Assist in outfitting of new equipment (IE: installing wires, harness, lights, pumps, toolboxes, hoses, hose reels, light bars, back racks, water tanks. * Heavy equipment experience * Operation of metal cutting/fabrication machines, drill presses, saws, punches, etc. * Operates and maintains other equipment for state lands management purposes such as road graders, dump trucks, loaders, etc. * Performs maintenance and construction activities on fixed facilities and equipment. Makes purchases of materials as needed. * Performs other related work as assigned. The Benefits of Working for the State of Florida Working for the State of Florida as an OPS employee is more than just a paycheck. * Participation in state group insurance (must meet eligibility requirements*); * Participation in the Florida Deferred Compensation Plan (457b). For additional details and online enrollment visit MyFloridaDeferredComp.com; * State of Florida 401(a) FICA Alternative Plan (tax deferred Retirement Savings Plan). For more information visit Social Security Alternative Plan (aigrs.com) and read OPS Social Security Alternative Plan (Does not apply to previous FRS Retirees); * Flexible Spending Accounts; For a more benefits information, visit ***************************** * Employee Assistance Program (EAP). * Seasonal and part-time OPS employees (less than 30 hours average per week) refer to People First at ************ or go to: ************************************************************************************** SPECIAL NOTES: The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. Location:

Job Description Here at Alcom we believe in our mission, vision, and values. Mission: To be the most influential partner in the trailer industry. Vision: To become the market leader in innovative, quality transportation solutions through an unmatched commitment to our employees and customers. Values: Customer Focus, Integrity, Problem Solving, Teamwork The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Apply in person - 2526 W. New York Ave, Deland, Fl 32720 M-Th 6:00a - 4:30p | Friday Overtime Potential Heath Insurance Dental & Vision Insurance Short-Term & Long-Term Disability Paid Holidays and Paid Vacation Paid Life Insurance 401(K) plan with 4% match FUNCTIONS AND RESPONSIBILITIES: The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Reads and follows blueprints and work orders ensuring a quality product that meets customer demands. Welds different facets of a trailer, including but not limited to: tacking, clamping, and welding with proper bead size on bases and cages in accordance with the work order; ensures quality of welds for structural integrity. Obtains raw materials from Material Handlers. Buffs out rough edges using a hand-held power grinder. Notifies supervisor of any mechanical or material issues including but not limited to, defects in material, damage to the trailer, and deviations from work order. Ensures that finished product meets quality expectations. Strives for the highest level of quality and understands the need for continuous improvement; supports the concept of “good enough is never good enough.” Maintains a clean and safe work area; works to minimize scrap, places unused material back in appropriate area, and disposes of waste appropriately. Follows all safety procedures, wears appropriate personal protective equipment (PPE), and reports any accidents or near misses to supervisor immediately. Performs other related duties and assignments as required. Requirements: •Must be able to work quickly without sacrificing quality or safety •Must have a keen understanding of manufacturing processes. •Must be able to measure and cut accurately •Must possess the ability to creatively think and solve problems •Ability to read blueprints and work orders accurately •Ability to work in a fast- paced environment •Strong time management and organizational abilities Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace. EOE

Full-time Description Are you an experienced commercial combination pipefitter/welder looking for a dynamic and challenging work environment? If yes, then Rogers Building Solutions is the right place for you! We are a leading full service commercial mechanical contractor specializing in industrial, commercial, and institutional projects. Our team is made up of skilled and passionate individuals who are committed to delivering high-quality services to our clients. As we continue to expand our operations, we are looking for a talented Commercial Combination Pipefitter Welders to join our Merritt Island Florida team. This is a safety sensitive position Requirements Key Responsibilities: (list is not inclusive) - Reading and interpreting blueprints, plans, and specifications to determine the layout and placement of pipes, fittings, and fixtures. - Cutting, threading, and bending pipes using various tools and equipment. - Assembling and installing pipe systems for hot and cold water, heating, cooling, and gas and the ability to install copper piping to reheats and FCUs - Welding pipes and fittings using various techniques such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), and shielded metal arc welding (SMAW). 6g weld test required - Inspecting and testing installed pipes and systems to ensure proper functioning and adherence to building codes and safety standards. - Collaborating with other team members to ensure safety, good communication, and timely and efficient completion of projects. - Always maintaining a neat and orderly work area and following company safety protocols. - Experienced with screw pipe and weld pipe and knowledgeable of all fitting take outs for screw and weld fittings - Victaulic experience is preferred - Background checks, motor vehicle checks, drug screening performed - This is not a per diem position. Must be legally authorized to work in the United States and able to complete Form I-9 upon hire. Employment subject to E-Verify confirmation. Must be able to travel to multiple construction sites within the U.S. and present acceptable identification for security or travel purposes. Reliable transportation and ability to meet job-site access requirements. Qualifications: - High School Diploma or equivalent. - Minimum of 3 years of experience as a combination pipefitter welder in copper and pipe welding in a commercial setting. - Proficiency in interpreting blueprints and technical drawings. - Strong knowledge and experience in welding techniques and equipment. - Ability to work independently and as part of a team. - Excellent communication in English and problem-solving skills. - Must have a valid driver's license and reliable transportation. Essential Functions: · Climbing up and down ladders · Push, pull and frequently carry objects as tools, materials and equipment weighing up to 50 pounds. · Stoop, kneel, crouch and crawl. - Stand and walk for long periods of time. - · See and hear well with or without correction to avoid safety hazards to themselves and others. · Overtime and weekend availability, regular attendance · Work in heat and various other weather conditions · Travel to current job sites within Florida Rogers Building Solutions is an Equal Opportunity Employer and a Drug Free Workplace.We offer various insurance benefits to include, Medical, Dental, Vision, Life, STD, LTD, 401K with partial match and others! We also sponsor employees through free apprenticeships while you work. At Rogers, we take pride in our work and in our employees! Visit our website at: ******************** to see our projects and pride! CMSFOR1 Salary Description $30 - $38

We are hiring experienced traveling 1st Class Steel Pipe Welders for a long-term shipyard project in Port St. Joe, FL. This role is built for welders who travel for work and want steady hours, daily per diem, and a fast hiring process. Qualified candidates can be tested, cleared, and ready to start within 1-2 days. Weld Test (Onsite): 6G position on carbon steel Stick root - 6010 Flux core fill and cap Job Highlights: Up to 56 hours per week $150 per diem per day worked Long-term shipyard project Consistent work with overtime Requirements: Proven experience as a 1st Class Steel Pipe Welder Ability to pass the onsite 6G weld test Minimum 4 years of shipyard experience Strong safety awareness and reliable attendance Benefits: Company-paid Minimum Essential Coverage (MEC) plan (employee only) $100 travel reimbursement added to first paycheck Long-term project stability Fast hiring process

Job Description Our client is looking for First Class Welders to work at their Jacksonville facility. This is a full-time temp to hire position. Hours: Days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Summary/Objective Capable of performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. Willingness to cross train for multi-function structural and piping assembly processes Essential Functions Fluent in understanding job specific WPS / PQR's and capable of setting machine up for performance in all positions to certified testing criteria. Analyze blueprints for welding insignia and the application thereof to assembly components on piping and structural systems. The ability to identify correctly, measure, hand dress, cut and fit prepare metal surfaces for welding process to be completed per job specific requirements. Capable of visual observation of pre- and post-welded surfaces; and the interpretation of fulfilled job requirements with micrometer, caliper, and other precision measuring instruments. Technically proficient in the interpretation of insufficient weld criteria and knowledge to efficiently blend to repair. Strong mechanical aptitude and problem solver who can understand and follow instruction. Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations. Operate overhead cranes and or forklifts. Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Competencies Collaboration Skills Reliable Attendance Decision Making Leadership Communication proficiency written and verbal Ethical Conduct. Problem Solving Organizational Skills Thoroughness Time Management Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Required Education and Experience Basic math and language skills required. Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting. Related experience or training. Preferred Education and Experience 6+ Years' experience in Welding SMAW, FCAW and GTAW, or a combination. 2 years vocational technical training. Additional Eligibility Qualifications Must have dependable transportation, valid driver's license, clean back-ground check and random drug screening consent. Job Type: Full-time Pay: $22.00 - $28.00 per hour Shift: 8-hour shift Day shift Application Question(s): Are you willing to take a drug test? Do you have a clean background, and can we run a background check? Experience: Precision measuring instruments: 6 years (Required) ISO 9001: 3 years (Required) TIG welding: 6 years (Required) Stick welding: 6 years (Required) License/Certification: Driver's License (Required) Ability to Relocate: Jacksonville, FL: Relocate before starting work (Required) Work Location: In person

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (956)382-2631 / (281)965-2749 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

We are hiring experienced traveling TIG Pipe Welders for a long-term shipyard project in Port St. Joe, FL. This role is ideal for welders who are confident in 6G TIG welding, flexible with process changes, and looking for steady hours, daily per diem, and fast placement. Qualified candidates can be tested, cleared, and ready to start within 1-2 days. Job Highlights: Up to 56 hours per week $150 per diem per day worked Long-term shipyard project Consistent work with overtime Onsite Weld Test: 6G TIG test TIG “all the way” - root and cap Welders must be prepared for modifications, which may include: Flux on the cap Stick & TIG processes Must also pass a carbon steel weld test Requirements: Proven experience as a TIG Pipe Welder Strong ability to pass 6G pipe weld tests Minimum of 4 years of shipyard experience Ability to adapt to different welding procedures Strong safety awareness and reliable attendance Benefits: Company-paid Minimum Essential Coverage (MEC) plan (employee only) $100 travel reimbursement added to first paycheck Long-term project stability Fast hiring process

This is a general description of the essential job functions and is not intended to be an employment contract. Eastern Shipbuilding Group, Inc. maintains its status as an at-will employer. Position requirements, skills, and abilities included in this have been determined to be the minimal standards required to successfully perform the position. Eastern Shipbuilding Group Inc. reserves the right to increase, waive or reduce these minimal standards. In no instance, however, should the duties, responsibilities, and requirements described be interpreted as all-inclusive. All employees of Eastern Shipbuilding Group, Inc. are expected to perform the duties as assigned by Eastern Shipbuilding Group, Inc., supervisory/management personnel, regardless of job title or routine job duties. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. To perform this job successfully, an individual is expected to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability expected. In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. However, no accommodation will be made which may pose serious health or safety risks to the employee or others or which imposes undue hardship on Eastern Shipbuilding. POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because Eastern Shipbuilding is continually growing to meet the needs of our customers; the essential duties and responsibilities may be different than described. Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Complete welds to the specified standards using appropriate equipment and materials. Install and verify the operation of high-pressure steel pipes and fittings. Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipes and/ or similar tubular products. Test installed piping systems and install other related items in accordance with the applicable plans and specifications. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Troubleshoot equipment. Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. Work with minimal supervision. Perform other duties as assigned. Successfully pass a 6G (6” pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG. Successfully pass a 6G (6” weld coupon) Carbon Stell - root and cap. SUPERVISORY RESPONSIBILITIES May indirectly supervise and/or train subordinates. REQUIREMENTS Education/ Experience: High school diploma or GED equivalence plus three to five years of pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety conscious, and multitasking. Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstanding extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. We are equal opportunity/affirmative action employers, committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status, or any other protected characteristic under state or local law.