Welder jobs in Freeport, NY - 27 jobs

JOB PURPOSE: The Trades Instructor will provide job and safety training, demonstrate proper workplace procedures and standards in a classroom setting and/or in regular operating conditions in the workplace, and prepare students to become skilled in their trade while providing a safe, constructive, and positive learning environment. JOB SUMMARY: The Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade. ESSENTIAL FUNCTIONS : Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades. Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly. Explains and demonstrates jobs and tasks to be performed. Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student. Schedules, organizes, and provides supplemental training when necessary. Conducts refresher training and make-up sessions when necessary. Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety. Guides, assigns, schedules, and supervises the work of students; ensures work is completed on in accordance with assigned curriculum. Ensures each assigned student follows all safety standards. Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner. Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards. Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school. Participate and successfully complete all professional development sessions as required by accrediting and state standards. Participate in all individual career development sessions as required. Maintain trades licenses as needed per state and accrediting standards. Functions as an ambassador and liaison for Apex Technical School. Contributes to organization success by accepting new assignments, helping team members, learning new skills, and striving to improve team results. NOTE :The employer reserves the right to change or assign other duties to this position. QUALIFICATIONS: Job qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below: Education: High School Diploma or equivalent Equipment Skills: · Thorough understanding of the correct and safe operation of all manually operated and power related tools and equipment. · Use of safety equipment/apparel. Job Experience: Minimum of 3 years' experience in the trade(s) Knowledge, Skills, & Abilities: Maintain good safety practice throughout the workday Conduct and effectively manage daily workload Interpret and layout projects according to specifications Manage and organize training resources effectively Knows the fundamentals of different welding techniques Evaluate and conduct tests to determine the soundness/quality of welds Maintain good recordkeeping Basic understanding of theoretic principles and practical application of respective trade concepts and skills. Oral, written, and presentation communication skills. Establishing and maintaining effective working relationships with staff, supervisors, and students. Problem-solving and conflict resolution skills. Ability to teach and work with a diverse student population with varying skills and abilities. Ability to establish a safe and comfortable learning environment. Effective communication of complex ideas and concepts to students. Ability to work independently and collaboratively as a team. Ability to objectively evaluate and grade student performance against established standards as prescribed by Apex and accrediting entities.

1st Shift Hours: 7:00am - 3:30pm Company Paid Benefits including Medical, Dental, Vision and Paid Time Off Fabrication and assembly of sub-components for the completion of heat exchangers to drawing specification. Essential Duties And Responsibilites: * Prepare any cores (IE straighten and soap testing) needed for use in the welding area * Prepare any sub-components (IE cleaning) needed for use in the welding area. * Set up cores/sub-components in welding fixture and preparing unit for welding. * Test any cores (certification required) in the leak tanks. * Review all welds for any obvious flaws (IE- Missing welds, Voids in welds, Excess weld rod, Extremely sloppy welds) * Maintain workstation clean during the shift and ensure it is clean and organized for the next shift, following all 5S instructions * Other duties may be assigned. Required Skills and Abilities: * Must be mechanically inclined * Must be able to read and interpret engineering drawings and blue prints of parts * Must have mathematics skills * Use of calipers, height gauges, micrometers, squares, grinders, sanders, routers, band saws, drill presses, hydraulic presses and other miscellaneous hand tools are required. * Must be able to read, write and converse in English Education and Experience: * High School education or equivalent * Shop floor experience a plus AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications. HT specializes in custom build-to-specification applications where thermal performance, weight, structural and reliability are key considerations. HT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements.AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications. HT specializes in custom build-to-specification applications where thermal performance, weight, structural and reliability are key considerations. HT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements. Compensation Employee Type: Hourly Salary Minimum: $30,000 Salary Maximum: $50,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call ****************. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The MIG Welder at our Baldwin, WI Location is responsible for set up and welding of product. This is a 2nd shift onsite role, with hours Monday - Thursday 3:15 p.m. to 1:15 a.m. Role Responsibilities: * Performs set up and all position welding on a diversified line of standard and non-standard product according to print specifications. Materials may include steel, stainless steel, and aluminum. * Fit and position product weldments having several parts, using welding and welding fixtures and jigs where applicable. * Work from prints and routings. * Statistical process control (SPC) data collection and use of graphs (TIG welding). * Complies with all DOT, HAZMAT and environmental policies and procedures. * Uses all designated Personal Protective Equipment as required. While this list is representative of essential job duties, it is not an all-inclusive list of duties required to perform this role. Other duties may be assigned to fulfill Donaldson's mission, vision, and strategic plan objectives. Minimum Qualifications: To perform this job successfully, an individual must be able to demonstrate ability to: * Completion of welding diploma from an accredited weld school, or * Six months industrial weld experience, or * A combination of weld education and experience. * Pass blueprint reading test * Pass practical weld test * Ability to MIG and TIG weld * The position may require that the selected candidate is medically evaluated and able to wear a Power Air Purified Respirator ("PAPR") while fulfilling the requirements of the position. * Perform a variety of tasks throughout the day in a fast-paced work environment. * Interact constructively and effectively with all plant employees. * Ability to work in a team environment toward a common goal. * Reacts to change productively and to handle other tasks as assigned. * Maintains a pattern of regular and predictable attendance. Certifications/Licenses/Registrations: * Weld Hourly Pay Range: $27.41 - $33.50, depending on relevant experience, qualifications, and skills. This position is overtime eligible as per state and federal regulations. This position is eligible for a gainsharing plan based on the achievement of specific goals. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. Key words: TIG Welding, Fabrication, Blueprint Reading, Metalwork, Production Environment Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

P.H. Works, Inc. is looking to hire a Welder fabricator with a great attitude. Proficient welding and fabrication skills to join metal parts according to print, sketch, or verbal instructions Ability and skill to setup and operate machine tools to cut and shape light gauge material safely and proficiently Fit-up and polishing experience Must have the ability to read and work off blueprints Ability to communicate and work well with others in a spirit of cooperation and teamwork Required: OSHA 30 & 10-Hour F60 & G60 Valid Drivers License - with minimal to no moving violations in the last 3 years We offer: • Competitive Salary • Paid Weekly • Paid Time Off • Health Benefits

JOB PURPOSE: The Trades Instructor will provide job and safety training, demonstrate proper workplace procedures and standards in a classroom setting and/or in regular operating conditions in the workplace, and prepare students to become skilled in their trade while providing a safe, constructive, and positive learning environment. JOB SUMMARY: The Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade. ESSENTIAL FUNCTIONS : * Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades. * Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly. * Explains and demonstrates jobs and tasks to be performed. * Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student. * Schedules, organizes, and provides supplemental training when necessary. * Conducts refresher training and make-up sessions when necessary. * Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety. * Guides, assigns, schedules, and supervises the work of students; ensures work is completed on in accordance with assigned curriculum. * Ensures each assigned student follows all safety standards. * Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner. * Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards. * Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school. * Participate and successfully complete all professional development sessions as required by accrediting and state standards. * Participate in all individual career development sessions as required. * Maintain trades licenses as needed per state and accrediting standards. * Functions as an ambassador and liaison for Apex Technical School. * Contributes to organization success by accepting new assignments, helping team members, learning new skills, and striving to improve team results. NOTE :The employer reserves the right to change or assign other duties to this position. QUALIFICATIONS: Job qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below: Education: High School Diploma or equivalent Equipment Skills: · Thorough understanding of the correct and safe operation of all manually operated and power related tools and equipment. · Use of safety equipment/apparel. Job Experience: Minimum of 3 years' experience in the trade(s) Knowledge, Skills, & Abilities: * Maintain good safety practice throughout the workday * Conduct and effectively manage daily workload * Interpret and layout projects according to specifications * Manage and organize training resources effectively * Knows the fundamentals of different welding techniques * Evaluate and conduct tests to determine the soundness/quality of welds * Maintain good recordkeeping * Basic understanding of theoretic principles and practical application of respective trade concepts and skills. * Oral, written, and presentation communication skills. * Establishing and maintaining effective working relationships with staff, supervisors, and students. * Problem-solving and conflict resolution skills. * Ability to teach and work with a diverse student population with varying skills and abilities. * Ability to establish a safe and comfortable learning environment. * Effective communication of complex ideas and concepts to students. * Ability to work independently and collaboratively as a team. * Ability to objectively evaluate and grade student performance against established standards as prescribed by Apex and accrediting entities.

Based in St. Louis, Core & Main is a leader in advancing reliable infrastructure with local service, nationwide. As a specialty distributor with a focus on water, wastewater, storm drainage and fire protection products and related services, Core & Main provides solutions to municipalities, private water companies and professional contractors across municipal, non-residential and residential end markets, nationwide. With over 370 locations across the U.S., the company provides its customers local expertise backed by a national supply chain. Core & Main's 5,700 associates are committed to helping their communities thrive with safe and reliable infrastructure. Visit coreandmain.com to learn more. YOU love playing a vital role in completing customer projects that can directly save lives. You enjoy working with your hands and take pride in your workmanship. You can weld various fittings to different sizes of pipe and welding joints. You have excellent attention to detail and can spot deficiencies. ARE you able to weld with manipulators, positioners, and free hand? Are you able to read CAD or hand drawings to calculate and accurately measure, cut, fit-up, and align piping for the welding of various configurations? Are you a certified Welder with experience in code welding? HERE at Core & Main, we value the individual, and the unique contributions you bring. Here we support and encourage continued learning. Here we invest in the development and well-being of our people, who are the key to our future. Here we value diversity and want to ensure each voice is heard. Here, our team members thrive as a community. Preferably, YOU have: * 1+ year of welding experience * Certification in pressure pipe welding HERE, we have: * Medical with 100% preventative care coverage * Health Savings Account * Dental and Vision * 401K * Tuition Reimbursement and Tuition Grants * Continued learning opportunities through our onsite training facility and extensive online learning catalog * Professional development and industry networking opportunities, e.g. Our Women's Network and community engagement events Pay: $17.42 - $23.24 per hour Core & Main is an Equal Employment Opportunity employer. Employment at Core & Main is based solely on a person's merit and qualifications directly related to professional competence. Core & Main does not discriminate against any employee or applicant on the basis of race, creed, color, religion, national origin, nationality, ancestry, age, disability, veteran status, pregnancy or related condition (including breastfeeding), affectional or sexual orientation, gender identity or expression, marital status, status with regard to public assistance, citizenship, or any other basis protected by law. None of the questions in this application are intended to elicit information regarding any protected characteristics, nor imply any limitation, illegal preferences or discrimination based upon non-job-related information or protected characteristics. For more information, please click here or visit ********************

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

Job Description TopView Sightseeing is a New York City-based company offering a variety of sightseeing bus tours. We own and manage the portfolio of brands, including TopView Sightseeing, Event Cruises NYC, Liberty Cruise, Bike Rental Central Park, and Attraction Pass. TopView Sightseeing serves over 500k customers annually, creating unforgettable experiences for New Yorkers and visitors. Join TopView Sightseeing as a Metal Fabricator in Ridgewood, Queens! About the Role: As a Metal Fabricator, you will play a crucial role in the construction of our new fleet of sightseeing buses. You will utilize your expertise in metal fabrication, including welding and assembly techniques, to contribute to exciting and innovative projects. Responsibilities: Fabricate, assemble, and install sheet metal products. Light welding: MIG and stick welding as required. Operate fabricating machines: Cutting, bending, straightening, and shaping metal. Perform various metalworking tasks: Riveting, drilling, gluing, grinding, and joint preparation. Maintain a clean and safe workspace. Contribute to a positive and collaborative team environment. Qualifications: 1+ years of experience in metal fabrication Experience with aluminum and steel fabrication Proficiency in using various power tools Ability to lift up to 50 lbs. Ability to pass a pre-employment drug screen MIG welding experience (preferred) Bilingual (English/Spanish) (preferred) Benefits: Competitive Pay: $20.00 - $22.00 per hour Excellent Benefits: Health, dental, vision insurance Union Membership: Join TWU Local 100 after 90 days Paid Time Off Employee Discount Schedule: 8-hour shifts: 5:30 AM - 2:30 PM (Monday-Friday) or Tuesday-Saturday Weekends as needed Powered by JazzHR TFNj6sevjw

Job DescriptionDescription: Come join the best heating service company in the NYC area! Controlled Combustion maintains one of the largest and most qualified licensed heating specialist staffs in the industry. Our service personnel, numbering more than 40 people, are members of the Metal Trades Branch-Local 638-A.F.L-C.I.O. That means they are highly qualified, highly competent professionals. In addition, they receive rigorous in-house training as well as ongoing instruction from factory authorized experts and educational institution to keep their technical knowledge current and their maintenance skills sharp. Our shop has earned the prestigious National Board Repair "R" Certificate of Authorization and Symbol Stamp and "U" Certificate of Authorization and Symbol Stamp attesting to our service expertise. Also, our technicians are certified ASME code welders. We maintain a Class "A" installers license in New York City and are licensed throughout the metropolitan area as well. Benefits: 401(k) Dental insurance Health insurance Paid time off Retirement plan Vision insurance Schedule: Monday to Friday Overtime Weekends as needed Experience: Installation / Repair of Gas Piping: 1 year (Preferred) Welding: 1 year (Preferred) License/Certification: Driver's License (Preferred) Work Location: In person Requirements: This position will require the following skills and traits: Five (5) years experience under a Licensed Master Plumber DOB Full Gas Work Card Cutting, threading, and fitting black malleable steel piping Cutting, soldering, and braising copper piping ProPress fittings Knowledge of natural gas and fuel oil heating systems Knowledge of utility (ConEd and National Grid) procedures is a plus Electrical experience is a plus.

IHOP Porters will be responsible for cleaning and maintaining dishware/utensils for the continued smooth operation of the restaurant. IHOP Porters will also perform assigned sanitation and housekeeping tasks. Porters must have good communication skills and work well with others. This position requires you to stand for up to 8 hours during a shift, be able to lift at least and/or move up to 50 pounds, and have full mobility of hands and arms while performing repetitive tasks. Porters are also required to perform duties necessary for restaurant operations as assigned by acting supervisor, following governmental and company policies. The above is not an all-inclusive job description. Responsibilities of a Dishwasher:: ● Maintaining a clean and well-organized working environment ● Bussing tables to collect soiled plates and flatware ● Maintaining the availability of clean dishes at all times ● Cleaning kitchen appliances and machines ● Helping other team members to unload and store deliveries ● Assist other staff members with tasks when the need arises ● Adhere to food safety procedures and regulations ● Taking out the trash ● Rinsing garbage cans Dishwasher Job Requirements:: ● Must have minimal work experience as a dishwasher ● Must be proficient in operating with different types of dishes ● Must know and follow all food safety procedures ● Must carry at least a high school diploma or an equivalent ● Must have communication skills ● Must be able to prioritize tasks Benefits: ● Competitive Pay ● Flexible Hours ● Extensive Training ● Real Advancement Opportunities Work schedule Weekend availability Holidays Night shift

SunMED Medical is seeking a mastectomy (CMF)/compression garment fitter to join our NY location, A Personal Touch Boutiques, in either a part-time or full-time capacity. Successful candidates will have excellent customer service and must be outcome-oriented. The ability to work in a fast paced environment with strong attention to detail is essential. Provides clear and concise paperwork to the inside sales team to facilitate product ordering. Communicates effectively with inside sales team. Helps to obtain prescriptions and additional paperwork when asked. · Measures patients for Mastectomy and Lymphedema products. Completes the correct forms based on the products ordered. Ensures a proper fit for each patient. Works with the inside team when a return is necessary. Is familiar with products and assists therapists/customers/patients with product selection. Schedules fitting appointments efficiently in order to accomplish as many fittings as possible each day. Upon delivery in the Boutique, ensures a proper fit of garments. Develops positive relationships with local referral sources and manufacturer reps. Traveling to other boutique and facility locations for fittings, as needed. Qualifications Prior Mastectomy and Compression Garment Fitting Experience preferred; however, we are willing to train the right candidate. Understanding of Insurance and the ability to convey benefits to patients Exceptional customer service skills, over the phone and in person, with our customers and other employees. Ability to build rapport with customer and personalize their experience. Strong sense of urgency and problem solving skills. Familiarity with computers and willingness to learn our program used for patient charting. Adaptability to new processes and technology. Additional Information We have a pleasant work environment, with a flexible work schedule between the workday hours of 8AM-6PM, and some Saturdays as needed. Full-time employees received paid holidays and vacations. We offer medical/dental/life/disability benefits, a 401K program, and tuition reimbursement for eligible employees.

Job Description Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Powered by JazzHR sM65VnVpr0

The alterations fitter reports to a/the Alterations Manager. The alterations fitter is responsible for hosting a positive fitting experience for each customer and pinning the garments in accordance with Kleinfeld Bridal Customer and Fitting Standards Roles and Responsibility: The duties of the alterations fitter include but are not limited to the following: Provide courteous and pleasant service and perform tasks in accordance with Kleinfeld Bridal Customer Service and Fitting Standards Be courteous and pleasant with coworkers and supervisors Complete fittings assigned by the alterations manager Pin each garment to Kleinfeld Bridal Pinning Standards Perform the work assigned by the Alterations Manager Meet productivity standards Communicate supply needs to the Alterations Manager Ensure that the alterations office, workrooms and fitting areas are kept organized, clean and safe for all employees and customers Communicate machine or equipment repair needs to the Alterations Production Supervisor Qualifications and Education Requirements Education: Technical or Design degree, or equivalent 5 years work experience Communication: Able to communicate and read/write instructions Leadership: Able to demonstrate problem resolution skills Able to work effectively with all functions across the company, with individuals from diverse backgrounds and with staff at all levels of the organization Demonstrates ability to work flex style and work with a variety of groups including trades, creative, executives and hourly work force. Demonstrate the highest level of ethics and integrity Organizational Skills: Ability to keep workroom and space clean and organized Required Skills: Be an experienced alterations specialist, seamstress or tailor 5 years' experience Have 2 years of bridal sewing and fitting experience

Department Rooms Division Employment Type Fixed Term Contract Location Global Workplace type Onsite Compensation $1,622 - $2,311 / month Key Responsibilities Skills, Knowledge & Expertise Job Benefits About Princess Cruises At Princess Cruises, we believe in creating a welcoming, inclusive, and supportive work environment for our diverse, multicultural teams, both at sea and on shore. We offer unique career opportunities that combine professional growth, adventure, and the chance to make a lasting impact on people's lives through travel. Whether you're looking to advance your hospitality career, explore the world, or work in a dynamic, high-performing environment, Princess Cruises offers: Opportunities to travel and experience new cultures. Comprehensive training and development programs. A strong focus on teamwork and personal growth. Competitive compensation and benefits. A chance to be part of a world-class brand known for excellence. Get to know us by exploring our career site. You'll learn about our history, hear first-hand what our employees love about working for Princess Cruises, and discover the passion we have for giving our guests lifetime memories. Princess Cruises is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to the applicant's age, color, race, religion, national origin, sex (including pregnancy and pregnancy related conditions), sexual orientation, gender identity or expression, disability, genetic information, or military or protected veteran status or any other characteristic protected under applicable laws. Scam Alert Protect Yourself from Recruitment Scams. Your safety and trust are important to us. Thank you for helping us maintain a secure and transparent hiring process.

1st Shift Hours: 7:00am - 3:30pm Company Paid Benefits including Medical, Dental, Vision and Paid Time Off Fabrication and assembly of sub-components for the completion of heat exchangers to drawing specification. Essential Duties And Responsibilites: Prepare any cores (IE straighten and soap testing) needed for use in the welding area Prepare any sub-components (IE cleaning) needed for use in the welding area. Set up cores/sub-components in welding fixture and preparing unit for welding. Test any cores (certification required) in the leak tanks. Review all welds for any obvious flaws (IE- Missing welds, Voids in welds, Excess weld rod, Extremely sloppy welds) Maintain workstation clean during the shift and ensure it is clean and organized for the next shift, following all 5S instructions Other duties may be assigned. Required Skills and Abilities: Must be mechanically inclined Must be able to read and interpret engineering drawings and blue prints of parts Must have mathematics skills Use of calipers, height gauges, micrometers, squares, grinders, sanders, routers, band saws, drill presses, hydraulic presses and other miscellaneous hand tools are required. Must be able to read, write and converse in English Education and Experience: High School education or equivalent Shop floor experience a plus AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications. HT specializes in custom build-to-specification applications where thermal performance, weight, structural and reliability are key considerations. HT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements.AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications. HT specializes in custom build-to-specification applications where thermal performance, weight, structural and reliability are key considerations. HT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements. Compensation Employee Type: Hourly Salary Minimum: $30,000 Salary Maximum: $50,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) ###-####. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The TIG Welder at our Baldwin, WI location is responsible for set up and welding of product. This is a 2nd shift onsite role, with hours Monday - Thursday 3:15 p.m. to 1:15 a.m. Role Responsibilities: * Performs set up and all position welding on a diversified line of standard and non-standard product according to print specifications. Materials may include steel, stainless steel, and aluminum. * Fit and position product weldments having several parts, using welding and welding fixtures and jigs where applicable. * Work from prints and routings. * Statistical process control (SPC) data collection and use of graphs (TIG welding). * Complies with all DOT, HAZMAT and environmental policies and procedures. * Uses all designated Personal Protective Equipment as required. While this list is representative of essential job duties, it is not an all-inclusive list of duties required to perform this role. Other duties may be assigned to fulfill Donaldson's mission, vision, and strategic plan objectives. Minimum Qualifications: To perform this job successfully, an individual must be able to demonstrate ability to: * Completion of welding diploma from an accredited weld school, or * Six months industrial weld experience, or * A combination of weld education and experience. * Pass blueprint reading test * Pass practical weld test * Ability to MIG and TIG weld * The position may require that the selected candidate is medically evaluated and able to wear a Power Air Purified Respirator ("PAPR") while fulfilling the requirements of the position. * Perform a variety of tasks throughout the day in a fast-paced work environment. * Interact constructively and effectively with all plant employees. * Ability to work in a team environment toward a common goal. * Reacts to change productively and to handle other tasks as assigned. * Maintains a pattern of regular and predictable attendance. Certifications/Licenses/Registrations: * Weld Hourly Pay Range: $27.41 - $33.50, depending on relevant experience, qualifications, and skills. This position is overtime eligible as per state and federal regulations. This position is eligible for a gainsharing plan based on the achievement of specific goals. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. Key words: TIG Welding, Fabrication, Blueprint Reading, Metalwork, Production Environment Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

As a Welder, you will be responsible for welding the structural framework on the exterior of a building in Manhattan. This role involves working with structural steel and framework, utilizing various welding techniques to ensure a strong and stable construction. $35-$50/hr depending on experience **Responsibilities** + Perform welding on structural frameworks of high-rise buildings. + Utilize flux core, TIG, and MIG welding techniques. + Execute vertical and structural welds on building exteriors. + Ensure all welding work meets safety and quality standards. **Essential Skills** + Proficiency in flux core, TIG, and MIG welding. + Experience in welding structural steel and frameworks. + OSHA 30 certification. + Site Safety Training (SST) certification. **Additional Skills & Qualifications** + Experience working on high-rise building exteriors is advantageous. **Why Work Here?** Join a team that offers multiple job opportunities lasting 1-2 years, with the potential to transition to a permanent position. Benefit from a stable work environment with opportunities for career growth. **APPLY NOW!** **Job Type & Location** This is a Contract position based out of New York, NY. **Pay and Benefits** The pay range for this position is $35.00 - $50.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in New York,NY. **Application Deadline** This position is anticipated to close on Jan 21, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Based in St. Louis, Core & Main is a leader in advancing reliable infrastructure™ with local service, nationwide . As a specialty distributor with a focus on water, wastewater, storm drainage and fire protection products and related services, Core & Main provides solutions to municipalities, private water companies and professional contractors across municipal, non-residential and residential end markets, nationwide. With over 370 locations across the U.S., the company provides its customers local expertise backed by a national supply chain. Core & Main's 5,700 associates are committed to helping their communities thrive with safe and reliable infrastructure. Visit coreandmain.com to learn more. YOU love playing a vital role in completing customer projects that can directly save lives. You enjoy working with your hands and take pride in your workmanship. You can weld various fittings to different sizes of pipe and welding joints. You have excellent attention to detail and can spot deficiencies. ARE you able to weld with manipulators, positioners, and free hand? Are you able to read CAD or hand drawings to calculate and accurately measure, cut, fit-up, and align piping for the welding of various configurations? Are you a certified Welder with experience in code welding? HERE at Core & Main, we value the individual, and the unique contributions you bring. Here we support and encourage continued learning. Here we invest in the development and well-being of our people, who are the key to our future. Here we value diversity and want to ensure each voice is heard. Here, our team members thrive as a community. Preferably, YOU have: 1+ year of welding experience Certification in pressure pipe welding HERE, we have: Medical with 100% preventative care coverage Health Savings Account Dental and Vision 401K Tuition Reimbursement and Tuition Grants Continued learning opportunities through our onsite training facility and extensive online learning catalog Professional development and industry networking opportunities, e.g. Our Women's Network and community engagement events Pay: $17.42 - $23.24 per hour Core & Main is an Equal Employment Opportunity employer. Employment at Core & Main is based solely on a person's merit and qualifications directly related to professional competence. Core & Main does not discriminate against any employee or applicant on the basis of race, creed, color, religion, national origin, nationality, ancestry, age, disability, veteran status, pregnancy or related condition (including breastfeeding), affectional or sexual orientation, gender identity or expression, marital status, status with regard to public assistance, citizenship, or any other basis protected by law. None of the questions in this application are intended to elicit information regarding any protected characteristics, nor imply any limitation, illegal preferences or discrimination based upon non-job-related information or protected characteristics. For more information, please click here or visit ********************

SunMED Medical is seeking a mastectomy (CMF)/compression garment fitter to join our NY location, A Personal Touch Boutiques, in either a part-time or full-time capacity. Successful candidates will have excellent customer service and must be outcome-oriented. The ability to work in a fast paced environment with strong attention to detail is essential. Provides clear and concise paperwork to the inside sales team to facilitate product ordering. Communicates effectively with inside sales team. Helps to obtain prescriptions and additional paperwork when asked. · Measures patients for Mastectomy and Lymphedema products. Completes the correct forms based on the products ordered. Ensures a proper fit for each patient. Works with the inside team when a return is necessary. Is familiar with products and assists therapists/customers/patients with product selection. Schedules fitting appointments efficiently in order to accomplish as many fittings as possible each day. Upon delivery in the Boutique, ensures a proper fit of garments. Develops positive relationships with local referral sources and manufacturer reps. Traveling to other boutique and facility locations for fittings, as needed. Qualifications Prior Mastectomy and Compression Garment Fitting Experience preferred; however, we are willing to train the right candidate. Understanding of Insurance and the ability to convey benefits to patients Exceptional customer service skills, over the phone and in person, with our customers and other employees. Ability to build rapport with customer and personalize their experience. Strong sense of urgency and problem solving skills. Familiarity with computers and willingness to learn our program used for patient charting. Adaptability to new processes and technology. Additional Information We have a pleasant work environment, with a flexible work schedule between the workday hours of 8AM-6PM, and some Saturdays as needed. Full-time employees received paid holidays and vacations. We offer medical/dental/life/disability benefits, a 401K program, and tuition reimbursement for eligible employees.