Welder jobs in Glendale, AZ

EIG Electrical Systems, as part of the DPR Family of Companies, is seeking for a motivated Welder to join our vibrant team in Surprise, AZ. Together, we'll work toward our vision of creating a brighter, more sustainable future. If you're seeking a workplace that highly values integrity, innovation, a positive work environment, and your unique talents, then you're in the right place! Learn and apply proper tool and equipment usage in completing metal work. Drill holes in metal, concrete, and masonry structure. Locate and mark reference points. Dig postholes and erect ornamental fencing. Assemble metal work, including structural ironwork and opening framing. Weld brackets to lintels, sills, columns or other structural framework. Create bolted and welded connections while erecting structural steel framing members. Bolt, clip, and weld ironwork. Bolt newel posts, balusters, and other stairway parts/rails to supports; embed in sockets. Install metal work, structural ironwork/joist/deck, and opening framing, including metal windows and door frames. Stage and sequence steel pieces according to erection plans for hoisting and framing. Measure and mark layout for installation. Set and check elevations. Connect ironwork to brackets, anchors, and existing structures. Verify installs are level and plumb. Install cover plates and molding with metal screws. Follow directions and adhere to company procedures. Apply an understanding of construction/welding terminology and industry to execute with excellence. Submit time entry daily. Comprehend and apply instructions and ask questions as needed. Remain open and flexible to changes. Seek clarity from Foreman or Leadman as needed. Manage work and self by noting work to be completed each day, completing tasks safely, demonstrating a willingness to assist with other tasks, as needed, and staying focused and motivated to build with excellence. Coordinate with other trades. Communicate with trade partners to coordinate work to be completed and ensure work flows smoothly. Escalate any issues or concerns, as needed. Required Education And Experience Experience using templates, square, transit, laser, level, plumb bob, transit, posthole digger Experience operating a welder, torch, power tools, and hand tools Experience operating off-road forklift, aerial boom, and scissor lift 5 to 10 years of Construction Welding/Fabrication experience Willing to work outside in various weather elements on large commercial construction projects Preferred Education And Experience High School Diploma Welding/Journeyman Certifications and/or Training Previous experience assembling metalwork Experience reading fabrication and erection drawings OSHA 10 or OSHA 30 training completion Willing to travel regionally as needed DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

**Traveler Aluminum Welder** **Paying $30 / HR - $32 / HR + $150 per diem 7 days a week** These positions are open due to the Maneuver Support Vessel (MSV) project. Currently the company is in the production of making 32 of these ships over the next 10 years. Currently they are working on the construction of the prototypes but all of these ships are being built for the army and will be used to transport military vehicles. Weld test will be held in Vancouver, WA. **Responsibilities:** + Must have experience on aluminum. + Must be able to describe this experience and pass a weld test. + Read blueprints and weld to specific instructions + On the job welding and fabricating on aluminum in and out of position. + MIG experience is a requirement and pulse arc experience is preferred. + Welding in multiple positions is preferred. **Qualifications:** + Prior welding experience on aluminum. **Environment/ Shift:** + Large scale manufacturer of structural steel and aluminum parts for government work including: bridges, dams, nuclear sites, boats and barges. + Clean shop that works almost exclusively with aluminum a majority of the time. + Day shift: 5:00am - 3:30pm, Monday through Thursday. **Employee Value Proposition:** + This is a long term position and are looking for long term employees. + Having 10 years of guaranteed work is not something most companies can offer. This is a great option for candidates looking for a stable company with guaranteed work. **Weld Test Information:** + Running uphill beads in 3G and 4G Aluminum weld test using MIG 3/64th wire to D1.2 standard (pulse arc). Weld together 5" long aluminum plates or coupons that is 3/8ths thick and there is no back end strip and gouge it is just a v-groove and open back. Visual test and break test to failure. Any qualified candidate will have the ability to interview within 24 hours with potential following week start date. If you are looking for a rewarding career with a stable company apply now! For any immediate questions please call Fernando Ortiz (Recruiter with Aerotek) at ************* (Cell). **Job Type & Location** This is a Contract to Hire position based out of Phoenix, AZ. **Pay and Benefits** The pay range for this position is $28.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Phoenix,AZ. **Application Deadline** This position is anticipated to close on Dec 17, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

MMI Tank & Industrial Services (MMI) is a full-turnkey industrial contractor serving clients in major markets across North America. Based in Phoenix, AZ, MMI has built a reputation for exceeding customer expectations through our commitment to safety, quality, and customer service. MMI specializes in engineering and design, fabrication, shop blast and prime, tank foundations, tank field erection, and field coating. We seek highly skilled welders and experienced storage tank erectors to join our team. You should be competent in using potentially dangerous equipment, follow all safety precautions, and have great attention to detail-knowledge of working with various materials to fabricate and assemble quality tanks. Tank Welder's responsibilities: Compliance with company procedures and policies. Ability to read and interpret technical drawings and blueprints. Prepare the appropriate welding methods and equipment based on requirements. Perform welding tasks on storage tanks, including a variety of welding techniques. Manual and semi-automatic welding equipment can be used in various positions to weld components. Check welded surfaces and structures for flaws by testing and inspecting them. Knowledge of tank erection tools: key plates, bull pins, u-bars, strong backs, hammers, and grinders Ability to climb ladders, stairs, scaffolding up to heights of 60 ft. and lift to 50lbs Working at heights and in confined spaces. Working in heat and cold weather. Hands-on experience in welding and fabricating storage tanks: hanging steel, working with tank fit-up tools/equipment, jumping scaffolding, and grinding. Adhere to all safety guidelines and regulations to ensure the working environment. Maintain welding equipment, troubleshoot issues, and perform routine maintenance. Strong attention to detail and quality craftsmanship Proficiency in working with different materials Requirements: Must pass 2G/3G/4G weld test in Flux Core (FCAW) and Stick (SMAW). Eligible to work in the US with a valid driver's license Must pass a pre-employment / random alcohol and drug screens. Travel to job sites across the country is required (75%). Effective communication and teamwork skills to collaborate with colleagues and support overall project objectives. A team-oriented and can-do attitude is a must. Benefits: Health Insurance Retirement plan Advancement opportunities Join our team and enjoy competitive starting pay of $30-$35 per hour, which may vary depending on your experience and the results of your welding test. In addition to the attractive pay range, we offer a competitive per diem and travel pay.

Job Title: Structural Welder Pay Rate: $25-$28/hour Schedule: Monday - Friday; 6:00 AM - 2:30 PM Madden Industrial Craftsmen, a premier staffing firm, is seeking a Structural Welder for a client in Phoenix, AZ. The client is a structural steel erection company offering services including structural steel fabrication, machinery and plant moving, trucking and rigging, and industrial piping. Responsibilities: * Operate welding equipment, forklifts, plasma programming, and other machinery. * Ensure the safe operation of equipment and maintain the yard area. * Assist in meeting production objectives. * Maintain shop tools and machinery. * Collaborate with the shop foreman to complete assigned work. * Perform additional tasks as assigned. Qualifications: * 3-5+ years of experience in MIG, FCAW, SMAW, and structural welding. * Current welding certification: AWS/Certified Weld Inspector preferred. * Working knowledge of welding methods, procedures, and quality control. * Strong technical background with hands-on experience in metal fabrication and welding using steel metals. * Ability to bend, stoop, reach, push, pull, climb, and carry objects with ease. * Ability to lift up to 75 pounds. #zr

We are looking for a skilled Welder to cut and join metals and other materials at our facilities or construction sites. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is important as it provides the foundation for strong infrastructure. A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is essential. Responsibilities Read blueprints and drawings and take or read measurements to plan layout and procedures Determine the appropriate welding equipment or method based on requirements Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Operate angle grinders to prepare the parts that must be welded Align components using calipers, rulers etc. and clamp pieces Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) Repair machinery and other components by welding pieces and filling gaps Test and inspect welded surfaces and structure to discover flaws Maintain equipment in a condition that does not compromise safety Requirements Proven experience as welder Experience using a variety of welding equipment and procedures (TIG, MMA etc.) Experience in using electrical or manual tools (saws, squares, calipers etc.) Ability to read and interpret technical documents and drawings Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.) Deftness and attention to detail Proficient in English Successful completion of a relevant apprenticeship program is required Professional Certification (e.g. an AWS welding certificate) will be a plus

Job DescriptionWise Staffing group is in search of Aluminum Tig Welders in West Phoenix!Job Title: Aluminum Tig WelderPay: $28-$30hr Location: Phoenix, AZCompany: Wise Staffing GroupAbout us:Wise Staffing Group, headquartered in Mississippi, is a full-service human resource company specializing in temporary and career staffing. Committed to providing excellent customer service.Apply today for our Aluminum Tig Welder position - Weekly Pay for jobs in Phoenix, AZ.Wise Staffing Group Offers:• Direct deposit & Global Cash Debit Cards• Health, vision, dental, life, and disability insurance• Overtime available The Torque Converter Welding Machine Operator will use semi- automatic welding equipment to weld TC cases together. The operator is required during the welding process to monitor and adjust end play, runout, balance and TC height. Is required to not only to operate the semi- automatic welder but be capable of making manual weld repairs using the TIG welding process. This position must have the ability to read, follow and interpret documents such as operating and maintenance instructions, and procedure manuals. While performing the duties of this job, the Torque Converter Technician is regularly required to stand for periods of time, and must also be able to regularly lift and/or move up to 50 pounds. Prior experience working in a manufacturing environment required.Tig Welder Essential Duties and Responsibilities: Capable of diagnosing welding machine issues Inspects and identifies issues on all welded TC's Ensures the highest levels of quality in work Understand and interpret test requirements Ability to set up and work with semi-automated equipment Knowledge of both manual TIG and semi-automatic MIG welding Knowledge of equipment painting procedures is a plus Other duties may be assigned Tig Welder Competencies: Strives to continuously build knowledge and skills Follows through and meets commitments Good at multitasking Detail-oriented and organized Supports organization and department goals and values Completes tasks on time or notifies appropriate person with an alternate plan Prioritizes and plans work activities, uses time efficiently Demonstrates accuracy and thoroughness in work Meets productivity standards; completes work in a timely manner Observes safety and security procedures High energy and enthusiasm Tig Welder Education/Experience:High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Want to contact us? Wise Staffing Group 10620 N 43rd Ave Ste 9 Glendale, AZ 85304 Contact Rosemary by calling at 602.975.6079. Click on the link to apply.https://www.wisestaffinggroup.com

All Things Metal is a structural and miscellaneous steel fabricator and erector located in Phoenix, Arizona. We are seeking a dedicated fitter/welder to join our fabrication shop for a full-time, Monday-Friday position. We are only interested in skilled professionals who can produce efficiently and meet required deadlines. All Things Metal is a fast-paced environment with an existing culture in a challenging industry. We are looking for fitter/welders to help take us to the next level and that are here to stay. This isn't a temporary position where you'll be laid off in a couple months after you complete a job. You will have a minimum of 40 hours per week. All Things Metal is built by positive, hardworking self-starters. That kind of spark creates an undeniable energy we appreciate and embrace. It keeps the work and the team moving forward and improving. At the same time, we're fueled by humility. Our team knows when to listen, when to adapt, and when to agree to disagree. Responsibilities - Accurately Layout & Fit-up of steel per shop drawings Properly setup welding machine/wire feeder for welding - and adjust settings as required during welding Verify and ensure fit-up of full penetration welds comply with plans, AWS D1.1, and welding requirements, and quality control Ability to read and properly interpret shop drawings Ability to perform welds per AWS D1.1 specification. Perform clean welds with no inclusions, undercut, porosity. Cleaning of all slag/splatter from welds and surrounding area Ensure equipment used is properly maintained/stored during/after use Grinding/Cleaning/Beveling fit-up of welds where required Advantages, but not required: MIG Welding with solid core gas-shielded wire (Light welding of railings/misc. steel) Ability to weld mild steel over 1-1/2" thickness Requirements - 3-5 years' experience in structural steel Fitting, layout, and welding using the Flux Cored welding process Candidate must be able to read and interpret shop drawings & plans. Candidate should be safety oriented (OSHA 10 or OSHA 30 a plus) A team player, punctual, and motivated Applicant must pass in-shop layout/fit-up test. Must be able to bring your welding hood/gloves/jacket as you will be given a fillet test to ensure proper tack welding abilities as well. Valid Identification Background test and drug screening will be done prior to hire Fitter/welders must be physically able to: Lift and carry objects weighing more than 50 lbs. Stoop, kneel, crawl, lay, bend, squat, stand and walk for long periods of time Work outdoors in all weather conditions Benefits: $19.00-$24.00 an hour depending on experience, with opportunity for advancement after the first 90 days Full benefits including PTO/ Sick time First- Time home buyer incentive with optional home buying references and a $500 bonus Dave Ramsey's SmartDollar Budget & Financial Education Library Additional company-wide giveaways 401K plan Family friendly culture events Birthday and Work Anniversary perks If you've read this far and think this sounds like a good fit for you, apply today and you'll hear from us soon! Please ensure a valid email is on file because that is how you will hear from us after you apply. We look forward to speaking with you! Job Type: Full-time Salary: DOE Benefits: 401(k) Dental insurance Flexible spending account Health insurance Health savings account Paid time off Referral program Vision insurance Experience level: 3 years Shift: Day shift Weekly day range: Monday to Friday, weekends required as needed to fulfill production needs. Work setting: Outdoor work Ability to commute/relocate: Phoenix, AZ 85024: Reliably commute or planning to relocate before starting work (Preferred) Experience: Welding: 3 years (Preferred) Work Location: In person #cm

We are seeking an experienced MIG Welder with a strong background in outer shell welding to join our team. We are looking for someone who takes pride in their craft, maintains high-quality standards, and thrives in a fast-paced production environment. Key Responsibilities: Perform high-quality MIG welding on outer shells, frames, and fabricated components Read and interpret blueprints, schematics, and welding symbols Measure, cut, and prepare materials before welding Inspect completed welds to ensure compliance with specifications Maintain a clean, safe, and organized work area Work collaboratively with fabrication and production teams Requirements: 2+ years of MIG welding experience (outer shell welding highly preferred) Ability to weld clean, aesthetically consistent outer shell welds Familiarity with shop tools, grinders, clamps, and measuring devices Ability to lift up to 50 lbs. and stand for extended periods Strong attention to detail and commitment to safety Welding certifications a plus but not required Why Join Us? Competitive pay Steady, long-term work Growth opportunities and skill development Supportive team environment If you're a skilled MIG Welder looking for a great opportunity, we'd love to hear from you!

Job Description Resolute Performance Iron is currently looking for structural fitters. General responsibilities and qualifications listed below. Shop Fitter/Welder Scope and Responsibilities Use MIG welding equipment to manufacture parts and assemblies in accordance with AISC and job specific standards. Supply quality parts and assemblies from jigs and fixtures for the welders to complete. Work on special projects as required. Support QC by taking feedback into their work and making the necessary changes for a quality product. Operate necessary equipment to perform tasks - includes but not limited to cranes, forklifts, mag drills, torches, hand tools, power tools, etc. Arrange parts and pass along important information to welders. Review fabricated assemblies for accuracy against drawings. Participate and attend safety and company meetings. Perform other duties as required by your manager. Qualifications Minimum 2 years of experience fitting/welding. Familiar with jigs and fixtures. Familiar with hand and power tools. The ability to read blueprints/engineered drawings. Able to lift and carry 50lbs without assistance. Must pass a drug test and weld test. Powered by JazzHR 01uajHNj8h

As a Welder Fabricator at Creative Environments, you will be an essential force behind our custom, high-quality designs that set us apart in the industry. With your skill and precision, you'll push the boundaries of traditional fabrication, creating innovative and truly unique pieces that bring our client's visions to life. Your dedication to excellence will strengthen our brand's reputation, while your commitment to safety and teamwork will empower a culture of collaboration and efficiency, ensuring each project's success in bold and impactful ways. Our welders / Fabricators can work in both shop and field settings. The Shop welders work mostly with aluminum and our field welders work to create, assemble, and install structures, components, and products such as frames, structural beams, gates, fences etc. Responsibilities: * Interpret technical drawings, blueprints, and specifications to determine welding and fabrication requirements. * Weld metal parts using various welding techniques (MIG, TIG, Stick, etc.) based on project needs. * Fabricate and assemble metal structures and components using a variety of hand tools, power tools, and welding equipment. * Prepare, cut, and fit metal materials for welding, ensuring accuracy in measurements and alignment. * Inspect completed work for defects or imperfections, ensuring compliance with quality standards. * Operate and maintain welding and fabrication equipment safely and efficiently. * Maintain a clean and organized work environment, adhering to safety regulations and guidelines. * Work closely with the engineering and production teams to ensure timely project completion. * Maintain a thorough understanding of welding safety practices, including the use of personal protective equipment (PPE). * Collaborate with other team members to meet production deadlines and ensure quality control. * Other duties as assigned by management Qualifications * High school diploma or equivalent. * Vocational training in welding or metal fabrication is preferred. * Proven experience as a welder/fabricator or in a similar role. * Proficient in various welding techniques (MIG, TIG, Stick, etc.) and familiarity with fabrication tools. * Ability to read and interpret blueprints, technical drawings, and welding symbols. * Strong attention to detail and ability to perform precision work. * Knowledge of safety procedures and ability to maintain a safe working environment. * Physical stamina and dexterity to handle heavy equipment and materials. * Ability to work as part of a team and communicate effectively with other workers and supervisors. * Ability to lift heavy objects up to 50 pounds * Ability to work outside in direct sunlight * Ability to navigate difficult terrain when necessary.

Job DescriptionWe are currently seeking experienced welders to join our National Projects team. Our crews work locally in various locations or travel to project sites throughout the country with a large volume of our work located in Southern Arizona. We also have active work opportunities throughout the rest of Arizona, Texas, Oklahoma, New Mexico, Florida, and elsewhere. Much of our work is federal, so employees have the opportunity to earn prevailing wages (Davis Bacon Act) based on their location. Responsibilities. Take charge of all assigned work and maintain a sense of ownership of all scope on-site Walk the site in an observant manner, taking note of hazards and, when appropriate, correcting them accordingly Develop an awareness of the entire project to include other trade work Communicate with fellow crew members, assigned foreman, and with public, customers, or adjacent trade crews when necessary Use various welding methods to create new piping systems and repair existing ones Requirements. Be able to test out in accordance with ASME Section IX and weld pipe in the 6g position

Job description: Work in the field in various settings on comprehensive industrial and mechanical projects. Responsible for maintenance and repair of industrial machinery and mining equipment using welding and mechanical skills. This position requires working in adverse weather conditions and working at heights. This position requires traveling and willing to work in different departments in the shop setting when field work is not available with regular overtime. Welding experience and mechanical ability is a must. This position will require being willing to work with our mechanics department and weld shop department regularly when field work is not available. Must be willing to travel or move areas with limited notice. Formal Requirements and Certifications of Job - Required Minimum 2 years of experience in welding or heavy industrial mechanics Knowledge of shop mechanics and mechanical equipment Ability to troubleshoot, identify and correct problems Good verbal and written communication Team player with focus on safety and quality Ability to prioritize, organize and multi-task daily Self-directed and can work with minimal supervision Willingness to learn 18 years or older Preferred: MSHA (Mine, Safety, Health Administration) OSHA safety training 2 year Welding degree or certificate Knowledge of shop mechanics and mechanical equipment Successfully completed college welding program or have at least 2 years of welding experience including dual shield welding Special Demands Lift or carry 75lbs We do pre-employment drug testing, functional job analysis and background checks “Equal Opportunity Employer: all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.”

Structural Fitter/Welders Needed MMI is an industrial contractor and steel fabricating company based in Mesa, Arizona. MMI has been in business since 1974 and continues to grow each year. We are very proud of the more than 200 loyal members of our team and are looking for individuals to contribute at a very high level. MMI is looking to hire experienced fitter/welders who have at least 5 years of experience in structural steel. Fitter/welders are involved in assembling and fitting to drawing dimensions of all kinds of structural steel. Must be able to pass a drug test. Pay range: $22.00 - $29.00 an hour We also offer the following benefits: Health insurance, Dental, Vision, Life 401K Holiday pay Paid time off Profit Sharing Responsibilities for Fitter/welders: Must be able to read, understand and interpret structural steel drawings Communicate with Foreman and QC Have the mathematical skills to accurately fit Follow welding procedures Must be certified or able to pass a weld test Must be competent riggers able to operate heavy loads on overhead cranes Should work systematically so QC can check jobs in a prioritized fashion Follow company and jobsite safety guidelines, procedures and policies Must be willing to work overtime and Saturdays as needed Strong teamwork Have tools Fitter/welders must be physically able to: Lift and carry objects weighing more than 50 lbs. Stoop, kneel, crawl, lay, bend, squat, stand and walk for long periods of time Work outdoors in all weather conditions MMI has strong reason for existing. Our Purpose is “To improve the lives of MMI Employees, Customers, & Vendors” We live our Core Values every day Happy - Choose to be happy and treat others with respect. Hungry - Seek learning and create opportunities. Adapt to change. Hardworking - Be ambitious and obsessed with quality. Honorable - Demonstrate humility and integrity and put the team first. If you appreciate our purpose and embrace our core values stated above, we invite you to apply.

Job Details Chandler, AZ $20.00 - $25.00 Hourly Road WarriorDescription At Sure Steel, Inc., we are more than just a construction company - we are builders of success, integrity, and innovation. We have established ourselves as a trusted leader in the steel fabrication and construction industry. Our commitment to excellence, safety, and customer satisfaction has earned us a reputation for delivering top-quality projects on time and within budget. Our team is dedicated to delivering innovative solutions to meet the unique needs of each project, ensuring safety, efficiency, and client satisfaction. Overview: The Welder I at Sure Steel, Inc. is an entry-level position responsible for performing basic welding tasks to support the fabrication of steel components. This role involves following detailed instructions, operating welding equipment safely, and ensuring high-quality welds. The Welder I will work under the supervision of experienced welders and supervisors to develop their skills and contribute to the successful completion of projects. Key Responsibilities: 1. Welding Operations: - Perform basic welding tasks, including MIG, TIG, and stick welding, on steel components. - Follow welding procedures and specifications to ensure high-quality welds. - Operate welding equipment safely and efficiently, adhering to company standards and guidelines. 2. Material Preparation: - Prepare materials for welding, including cutting, grinding, and cleaning surfaces. - Set up welding equipment and select appropriate settings based on material and project requirements. - Assist in the layout and assembly of components to be welded. 3. Quality Control: - Inspect completed welds to ensure they meet quality standards and specifications. - Identify and repair defects in welds, such as cracks, porosity, and incomplete fusion. - Maintain accurate records of welding activities and quality checks. 4. Safety and Compliance: - Follow all safety procedures and protocols, including the use of personal protective equipment (PPE). - Participate in safety training and drills to stay current with best practices. - Report any safety incidents or near-misses to the supervisor immediately. 5. Equipment Maintenance: - Perform routine maintenance and minor repairs on welding equipment. - Ensure welding tools and equipment are properly stored and maintained. - Report any equipment malfunctions or safety concerns to the supervisor. 6. Team Collaboration: - Work closely with other welders, fabricators, and shop personnel to support project needs. - Communicate effectively with team members to ensure clear understanding of tasks and responsibilities. - Participate in team meetings and training sessions as required. Qualifications Qualifications - High school diploma or equivalent. Technical or vocational training in a related field is a plus. Candidates with relevant work experience in a similar role or environment may be considered in lieu of formal education or certification. - Completion of a certified welding program or vocational training in welding is preferred. - Previous experience in welding or a related field is preferred but not required. - Familiarity with basic welding techniques and equipment operation. - Basic understanding of welding processes, techniques, and safety standards. - Strong attention to detail and ability to follow instructions accurately. - Good physical stamina and the ability to work in various positions (standing, bending, lifting) for extended periods. - Ability to lift and move heavy materials and equipment (up to 50 lbs.). - Strong communication and teamwork skills. - Willingness to learn and develop welding skills through on-the-job training. Sure Steel, Inc. is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state, or local law. Core Values: Ability, Integrity Benevolence, Safety, Continuous Improvement, and Environmental Responsibility.

About the role As a Combo Pipe Welder Journeyman you will be responsible for welding and fitting piping systems for commercial and industrial projects. This role requires proficiency in multiple welding processes, including TIG and Stick, on various materials such as carbon and stainless steel. You'll read and interpret blueprints, ensure all work meets safety and quality standards, and collaborate with a team to complete high-quality installations. If you're a skilled pipe welder looking for a challenging and rewarding opportunity, we want to hear from you! Essential Duties, Roles, Responsibilities & Procedures: Project Review: Analyze welding blueprints, specifications, and work orders to understand project requirements. Material Preparation: Prepare and inspect materials before welding to ensure proper fit and alignment. Welding Operations: Perform welding tasks using various techniques, including MIG, TIG, and stick welding. Quality Control: Ensure all welds meet industry standards and company quality requirements. Safety Compliance: Follow all OSHA and company safety procedures, including proper use of personal protective equipment (PPE). Equipment Maintenance: Maintain welding tools and equipment in good working condition. Regulatory Compliance: Stay informed about industry regulations and ensure all welding activities meet safety and code requirements. Documentation: Maintain accurate records of welding activities, including materials used, inspection reports, and work completion details. Collaboration: Work closely with supervisors, engineers, and other trades to ensure project efficiency. Training & Mentorship: Assist in training and mentoring junior welders to enhance their skills and knowledge. Communication: Maintain clear and effective communication with supervisors, project managers, and team members. Qualifications & Experience: Education & Certifications: High school diploma or equivalent required. Completion of a welding apprenticeship program or vocational training preferred. AWS (American Welding Society) certification preferred. Must possess any licenses or certifications required by state or local regulations OSHA 10 certification required. Experience: Minimum of 3+ years of experience in industrial welding and fabrication. Experience with carbon steel, stainless steel, and alloy welding is a plus. Technical Skills: Proficiency in MIG, TIG, stick (SMAW), and flux-core welding techniques. Ability to read and interpret welding blueprints, schematics, and fabrication drawings. Familiarity with welding inspection methods, including visual and non-destructive testing (NDT). Ability to operate grinders, cutting torches, and plasma cutters. Competencies & Behavioral Expectations: Strong problem-solving abilities to identify and resolve welding issues efficiently. Effective teamwork and collaboration to coordinate with other trades and supervisors. Excellent attention to detail and precision in welding and fabrication work. Commitment to workplace safety, ensuring compliance with OSHA and industry regulations. Adaptability and reliability to work in changing job site environments. Ability to work independently and follow strict welding procedures. Physical Requirements & Work Environment: Physical Requirements: Ability to lift and carry up to 50 lbs. regularly. Frequent standing, bending, kneeling, and working in confined spaces. Ability to work at heights, on scaffolding, and in enclosed areas when required. Work Environment: Primarily field-based, working on industrial construction sites and fabrication shops. Exposure to high heat, sparks, fumes, and loud noise from welding operations. Use of personal protective equipment (PPE), including welding helmets, gloves, and fire-resistant clothing. Travel Requirements: May require travel between job sites depending on project needs.

Job Description At Radius Aerospace - Phoenix, we offer a unique environment that fosters individual growth and rewards performance. The work environment is fast-paced and high-energy. You'll be surrounded by people who are passionate about what they do. Help us succeed by doing your part as a member of our Machine Shop as a Senior Aerospace Fusion/Tig Welder . We offer a unique environment that fosters individual growth and rewards performance. The work environment is fast-paced and high-energy. You'll be surrounded by people who are passionate about what they do. To learn more about what we do, who we are, and what we value, please visit our website at ****************************** Employee Benefits: We recognize people as our most asset. Our competitive salary and benefits package includes 401K, matching 401k, dental insurance, medical insurance, disability benefits, prescription drug coverage, life insurance, casual dress, paid company holidays, and tuition reimbursement. New hires are eligible for medical, dental and vision coverage upon date of hire. Essential Duties and Responsibilities include the following. Other duties may be assigned. Develops welding, sequences, techniques and procedures associated with 300 series stainless and high nickel based alloy including combination aluminum and steel. Performs welding Parts and/or assemblies subject to pressure such as aqueous lines, structural and/or stress assemblies, complete manifold assemblies, and part and/or subassemblies of light gauge material. Setup and operate resistance welding equipment as required with little or no supervision. Setup, fit-up, trimming, position, align, clamp, bolt, and tack-weld diversified and involved structural assemblies and subassemblies. Works in conjunction with customer surveys and teams, and with vendors, subcontractors and suppliers in audits and selling situations projecting a positive company image. Setup operation to weld production assemblies and/or subassemblies developing procedures as required, for qualification, certification and/or making weld schedules on various types of metals. Rework self-detected defects based upon Engineering disposition approval. Performs tasks as related to fit-up and finishing incidental to the process. Performs daily maintenance and minor machine repairs on all types of weld equipment. Keeps work area clean Performs all other task as may be assigned by management Trains other employees. Qualifications High school diploma or general education degree (GED) required. Two to three years related experience in a manufacturing environment (preferred) Two year certificate from college or technical school and/or training; or three yeas related experience; or equivalent combination of education and experience. Additional Information Equal Opportunity Employer: Radius Aerospace is an Equal Opportunity Employer (M/F/D/V) and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, or any other characteristic protected by law. Disability Accommodation: If you are an individual with disabilities who needs accommodation or you are having difficulty using our website to apply for employment, please contact Human Resources at ************. Drug-Free Workplace: In order to maintain our Drug-Free work environment, successful completion of a pre-employment drug screen is required. Cybersecurity and Compliance: All employees are required to comply with the company's cybersecurity, information security, and Controlled Unclassified Information (CUI) handling policies. This includes safeguarding sensitive information, completing mandatory security training, and promptly reporting any suspected data or security incidents. Certain roles may involve access to CUI associated with U.S. Department of Defense contracts and require completion of CMMC/ITAR compliance training. ITAR/EAR Requirements: Pursuant to International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), applicants for select positions may be required to provide proof of U.S. Citizenship, U.S. Permanent Residence, or U.S. Immigration Status to meet the minimum qualifications. All inquiries related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. Work Authorization: All U.S. applicants must be legally authorized to work in the United States without company sponsorship.

JobID: 9078 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America.