Welder jobs in Greece, NY - 40 jobs

Tasks and Responsibilities: Sets up and operates electric and gas welding machines to weld metal parts according to work order, blueprint layouts and verbal instructions Regulates flow of gases for proper mixture Maintains recordkeeping of setting from precision tig control panels on power packs for repeat applications. Cleans parts to remove contamination before welding Sets up and operates all phases of welding applications using clamps, fixtures and torches, working to specified tolerances Performs grinding/testing duties (drain pans, tanks, etc.) Assembles assigned parts in accordance with production guidelines Moves material with appropriate equipment (forklift, hand truck) throughout the work area as needed Completes standard job sheets for each job Changes weld cups, electrodes and any other tooling to maintain quality and production standards Completes standard job sheets for each job Changes weld cups, electrodes and any other tooling to maintain quality and production standards Examines electrodes for sharpness and sharpen as needed Assists management recommending tooling needs Measures and sets up jobs according to blueprints as required Reports any discrepancies in material to management Notifies management of any equipment or area repairs needed Maintains tools, gauges and equipment in a clean, orderly and safe manner Complies with company policies and procedures giving special attention to safety regulations Wears protective clothing and equipment in accordance with safety guidelines Ability to distinguish colors Ability to read and understand the English language Other duties may be assigned.

On-Site **Title: Welder I** Job Family: Machinist Career Band: T13 _(The below is reflective of the listed band, but may be adjusted based on experience level)_ **Your Impact:** As a Welder Operator on our team at Qualitrol, you will be performing daily shop tasks assuring high quality, and efficient production. We primarily use TIG, SPOT and BRAIZE welding and you'll be responsible for welding a variety of products. The primary materials that you will weld are brass, aluminum and stainless steel. This position is critical to our production operation and supports Qualitrol Overall delivery. Support the accomplishment of Quality, Delivery, Inventory, and Productivity targets. Perform quality checks on welded metal parts at different stages through the process. Track and account for parts and adhere to the Kanban process for parts replenishment. Work in both metric as well as the U.S. standard units of measure. Set up, operate and/or maintain production equipment, machines and tools using process documents, diagrams, and written instructions in support of production goals. Use a variety of machinist's hand tools and precision measuring instruments. Produces set-ups and adjustment holding tolerances to blueprint specification. Inspect incoming raw parts from outside vendors as necessary. Participate in continuous improvement and lean methodologies. Perform duties using regular test equipment in accordance with prescribed procedures, practices, and specifications. Receive instructions on routine work assignments and general instructions on new assignments. Communicate effectively, troubleshoot, and use good judgment when resolving problems. Figures out material, parts, and equipment required. Completes testing for functionality and criteria. Other tasks as assigned. **Qualifications:** Ability to read and interpret blueprint drawings. Basic Shop Mathematics skills. Related welding experience preferred. Solid understanding of measuring tools. Ability to follow written and verbal work instructions; attention to detail. Able to work and communicate effectively with others. Commitment to quality and accuracy of work performed, and ability to observe and follow company safety rules and regulations. Ability to effectively communicate with team members. **Working Conditions:** Regularly exerting up to 20 lbs. of force and occasionally up to 50 lbs. Bending body downward and forward at the waist. Standing for sustained periods of time. Moving about on foot to accomplish tasks. **Ralliant Corporation Overview** Ralliant, originally part of Fortive, now stands as a bold, independent public company driving innovation at the forefront of precision technology. With a global footprint and a legacy of excellence, we empower engineers to bring next-generation breakthroughs to life - faster, smarter, and more reliably. Our high-performance instruments, sensors, and subsystems fuel mission-critical advancements across industries, enabling real-world impact where it matters most. At Ralliant we're building the future, together with those driven to push boundaries, solve complex problems, and leave a lasting mark on the world. **About Qualitrol** QUALITROL manufactures monitoring and protection devices for high value electrical assets and OEM manufacturing companies. Established in 1945, QUALITROL produces thousands of different types of products on demand and customized to meet our individual customers' needs. We are the largest and most trusted global leader for partial discharge monitoring, asset protection equipment and information products across power generation, transmission, and distribution. At Qualitrol, we are redefining condition-based monitoring. We Are an Equal Opportunity Employer. Ralliant Corporation and all Ralliant Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Ralliant and all Ralliant Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at applyassistance@Ralliant.com. **Pay Range** The salary range for this position (in local currency) is $24 - $29 / hourly

Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description Under the direction of the Welding Group Leader or Supervisor, the Welder works from customer drawings and a traveler to fabricate and weld components to produce the highest quality products at the lowest cost, while meeting departmental performance standards, customer specifications and delivery requirements, in accordance with company policies and procedures. A Class A Welder is capable of performing all aspects of welding. Can weld any type of project while consistently meeting or exceeding cycle times. Have the ability to fabricate from prints without the aide of fixtures. Able to do prototypes while also working with engineering to develop fixtures. Capable of being certified. Requires little to no supervisor and has the ability to interpret blueprints and understands weld symbols at an advanced level. Minimum Qualifications: Job knowledge through suitable education or prior work experience Have the ability to regularly lift and/or move 25-50 pounds Meet minimum 20/20 vision standards (with corrective lenses if needed) Score a minimum score on the in-house welding test Knowledge on how to set-up weld machine and lay a quality bead for both Mig and Tig Ability to read and understand blueprints and weld symbols at an advanced level Knowledge of the metric system preferred Accurately measure and lay out locations for welded components Adjust weld as needed to accommodate varying thicknesses of steel Operate grinder, drill, band saw, torch Complete and maintain all required paperwork, records, documentation, etc. Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards Specific Duties: Using MIG and/or TIG, weld components together according to blueprints and Traveler While performing the duties of this job, the employee is regularly required to stand, use hands, stoop, kneel, or crouch. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Must work at a reasonable pace (measured by production efficiency) and within our quality standards to insure timely completion Check and verify part numbers prior to assembly of product to customer specifications Notify supervisor of part shortages before the part runs out Protective clothing/equipment requirement: Must supply his/her own welding helmet and safety shoes Requires the use of safety glasses and shoes, welding helmet, grinding shield, tight-fitting clothing without tears, hearing protection and gloves This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Gorbel's mission is simple: We improve people's lives. That mission guides everything we do, from the products and service we provide to our outside customers to the work environment we foster for our employees. We are a manufacturer of material handling and fall protection products for the production and warehouse/distribution sectors. We're on the cutting edge of manufacturing and distribution; a thriving, growing company that is constantly seeking out new ways to innovate and elevate our products and our processes - and we're looking for people like you to join us in that mission. We're currently hiring for open positions in the US and Canada. We operate in Canada as Engineered Lifting Systems and Equipment (ELS)/DBA Gorbel Canada, and subsequent communication related to Canadian positions may show the ELS name. You may be contacted by phone by recruitment personnel based in either Canada or New York. Work Shift: Second Shift (United States of America) Job Description: Welders are responsible for designing, cutting, and permanently joining metal parts together through the application of appropriate welding techniques. Responsibilities Produce weldments to the specified documentation using both prints and job paperwork. Weld various grades of carbon steel, stainless steel, and aluminum Layout and fabrication of a custom product according to drawings Utilize fabrication tools such as oxy-acetylene torches, plasma cutters, magnetic-based drills, multi-spindle drilling machines, and other equipment as necessary Responsible forthe setup, operation, and maintenance of the tools and equipment SMAW, MCAW, GMAW, and spray arc welding Fit all assemblies and subassemblies to ensure accuracy and quality control. Safe operation of overhead cranes and all other shop equipment (electric, pneumatic, or hydraulic). Complete all required documentation All other duties as assigned by management Qualifications: High School Diploma, Trade School Certificate, or equivalent required SMAW, MCAW, GMAW, and spray arc welding experience required Must be certifiable and able to pass the certification test in accordance with the AWS D14.1 specifications Use and read basic hand tools, including but not limited to grinders, drills, and tape measures Handle materials with forklifts, pallet jacks, and overhead cranes as needed Ability to read a tape measure Ability to read a blueprint Must be able to communicate effectively with factory supervision Work Environment: ADA Physical/Mental/Workplace Requirements Able to lift and/or move up to 50 pounds. Able to stand (75%); walk (20%); stoop, kneel, or crouch (5%), as required. Able to climb a portable ladder Able to wear safety glasses and foot protection throughout the shift. Able to wear hearing protectors (earplugs) throughout the shift while working in an environment with moderate noise levels. Gorbel is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, gender, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Gorbel is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform their job-related duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ************. The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions, including but not limited to skill sets, experience and training, licensure and certifications, and other business and organizational needs. At Gorbel, it is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is: Welder I: Min $20.80 - Max $31.20 Welder II: Min $23.02 - Max $34.52 Welder III: Min $25.20 - Max $37.80 #HP

OPENING PFAUDLER - ROCHESTER, NY LAYOUT FITTER-WELDER Description of Job: Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques, including FCAW, GTAW open root and GMAW, all to ASME code standards. Additional skills that may be required include: X-ray repair. Automatic SAW and machine GMAW. C/S to S/S, S/S to S/S, and inconel qualified. Make or assist in making templates and fixtures. All functions including grinding, small head layout, nozzle swage and trim as required for single operator completion of vessels. Light grinding operations are included in all layout fitter-welder jobs. Must possess good match, blueprint and layout skills. Ability to solve production and quality problems with little supervision. Required Testing: Basic Math, radial and circumference, layout and welding questions. Calculator may be used. Must also pass a code weld test. Full-time position, competitive salary and full benefits package offered. This position will be filled without regard to sex, religion, age, race, color, non-job related disability or national origin. Pfaudler is an equal opportunity employer. Apply for this job though ADP careers.

About Us: Headquartered in St. Louis, MO, USA, Afinitas is the global market leader for pipe and precast concrete equipment, forming systems and concrete accessories used to build the world's critical transportation, water and utility infrastructure systems. Afinitas is known for the innovative technologies and services it provides through its trusted HawkeyePedershaab, BFS, New Hampton Metal Fab and other well-known brands, which customers have relied upon for decades. Afinitas is a part of BW Forsyth Partners, LLC, the investment arm of Barry-Wehmiller, a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: Summary This Operations group position executes procedures as they relate to fabrication, layout and preparation for welding operations needed for throughput of production parts, shop fixtures and other miscellaneous items. Responsibilities • Review shop drawings and other pertinent project information to identify and understand the scope of fabrication and process control requirements for each project. • Read and understand shop drawings, weld symbols and WPSs. • Understand the requirements of the pertinent AWS welding code. • Discuss and disseminate project requirements with management and other personnel. • Properly and safely handle work pieces using overhead crane equipment. • Verify component parts of weldment comply dimensionally with shop drawing details including weld preparations. • Communicate material quality issues to quality and supervisory personnel. • Set up and operate equipment for cutting, bending, milling, drilling and other operations as required for various materials. • Mark layout lines for component part locations forming subassemblies compliant with shop drawing details. • Preheat and measure material temperature in preparation for tack welding as necessary. • Tack weld component parts sufficiently to ensure their proper placement, alignment and orientation in the subassembly is achieved on completion of production welding. • Identify and incorporate bracing into tack welded subassemblies to control distortion during production welding. • Verify subassemblies comply dimensionally with shop drawings after the completion of tack welding and bracing. • Other duties as required. Qualifications Work Experience ……………………… 2 - 4 years as a production welder or fabricator.* Education & Training ……………….. High school graduate.* Skills and Knowledge Areas Required ………………………………….. Required and preferred welder capabilities, shop drawing reading and interpretation, layout, distortion control methods, multitasking, process adherence. Preferred …………………………………. Weld quality inspection, AWS D1.5 procedure qualification. At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: Afinitas

Full-time Description Second Shift 2:00PM - 10:30PM Clarence, NY 14031 *Must have reliable transportation* Pay Rate: $21 - $23/hour (based on experience) Job Summary for Welder: Works from a job traveler to fabricate and weld components to produce quality compliant products, while meeting departmental performance standards, customer specifications and delivery requirements. Essential Duties and Responsibilities for Welder: Using MIG and/or TIG, weld components together according to blueprints and job traveler Check and verify part numbers prior to assembly of product to customer specifications Accurately measure and lay out locations for welded components Adjust weld as needed to accommodate varying thicknesses of steel Non-essential Duties for Welder: Operate grinder, drill, band saw, torch and crane as assigned Complete and maintain all required paperwork, records, documentation, etc. including accurately completing daily labor card and submitting at conclusion of shift Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards Assist in training new employees in safe and efficient use of fabricating and welding methods Notify supervisor of part shortages before the part runs out Requirements Knowledge, Skills, and Abilities for Welder: Reads and accurately interprets blueprints at an advanced level Able to learn operations of multiple jigs/fixtures within a job area and must be able to regularly rotate jobs to meet schedules Skill level includes MIG, TIG and pipe welding capabilities as outlined in attached level breakdown Must work at a reasonable pace (measured by production efficiency) and within quality standards to insure timely completion Able to follow directions and perform repetitive tasks Ability to understand and carry out detailed written and oral instructions. Experience and Education for Welder: High School Diploma 2-4 years previous welding experience with non-structural components Must successfully complete in-house welding test Salary Description $21 - $23/hour

Job DescriptionDescription: This position includes enrollment in our 20-week, Arc & Flame Training Program in Rochester, NY. The $11,000 training cost is covered. Compensation and benefits begin at the start of your training date. Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate. Key Results Areas by level of work Level I: Quality - Complete and accurate work performed efficiently 1. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. Investigates special welding instructions to conform to Quality Assurance requirements. Slag work; examines weld for size of bead, penetration and quality continuous code welding and testing. Visually examines completed weld for size of bead, penetration and quality. Understand and work with complicated standards or special structures and weldments involving a number of parts and details, using clamp, tack weld, jigs, fixtures, and turning rigs. In preparation of surfaces to be welded, will use a variety of tools such as grinder, chippers and arc gouging equipment. Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. Uses an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions Consistently meets customer's quality requirements and expectations. 2. Follow instructions - oral and/or written Can properly read all blueprint and work instructions Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate. 3. Safety & housekeeping Work may require use of scaffold, ladders, forklift, and/or scissor lift. Work may require the use of a crane to move part. Maintains a clean work area with no clutter. Practices safety at all times while at work. Follows safety policies and procedures and speaks up when others are non-compliant. Wears all safety equipment for area of work. 4. Continual Improvement suggestions Keeps an open mind to others continuous improvement suggestions Bring continuous improvement suggestions to the appropriate team member. 5. Professional Development Demonstrates initiative, positive attitude, and enthusiasm for the job Will follow up with supervisor on professional development goals and opportunities Takes an interest and lets it be known that they have a desire to grow with the company Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training · Technical Trades School in Welding · High school GED Required Experience: · 1+ years of welding experience. Other: · Must be willing to work overtime as required. · Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: 1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. 2. Strong organization and time management skills. 3. High attention to detail. 4. Demonstrate behavior consistent with company values. 5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. 6. Exhibits polite and professional communication via phone, e-mail and mail. 7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. 8. Maintain a collaborative relationship with internal and external stakeholders. 9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. 10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. 11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. 12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. 13. Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. · Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. · Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization Must be able to work in the U.S without sponsorship. Requirements:

Graver Technologies LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Responsible for the entire sequence of cutting and welding operations for a wide variety of repair and fabrication work. Aligns and welds components of metal tools, wires, fixtures and other metal products. May utilize different types of welding systems for different tasks. Maintains a safe work area and may train apprentices in the trade. Compensation for this role ranges from $25-28, prior to shift differential, which is an additional $1.00/hour. Full benefits package is included in this role. Pay Range: 21.60 - 32.40 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Are you looking to grow your career with a well-known, successful organization? If you have previous experience as a structural welder, Patriot Towers might be a great fit for you! COMPENSATION: $20-$50 based on experience Weekly per diem checks issued where room and board is applicable. Summary of Position: Structural Field Welders responsibilities involve performing proper lay out, fit up of steel plate, beams and various metal components. Must be able to use basic hand tools including grinders, torches, saws to ensure proper fit up of metal components. The Field Welder must possess a basic understanding of mathematics, blueprint reading, as well as general welding knowledge. Welders must be comfortable working from heights to include welding out of position for extended periods of time. Individuals must be able to pass 3G & 4G SMAW welding test on 1" plate after hire. Duties & Responsibilities: * Works at heights for extended periods of time (Must pass Climbing and Climber Rescue tests to earn Certifications) * Welds in horizontal, vertical and overhead positions * Ensures safety standards are met at all times * Complete work and maintain high quality standards * Preps steel for welding and fitment * Selects proper size and type of welding electrodes to ensure penetration and complete fusion of base and filler metals Competencies/ Qualifications: * Working knowledge of different metals and alloys commonly used. * Must have the mechanical and technical knowledge and skill to perform operator maintenance on all equipment pertinent to the position. * Knowledge of or ability to learn Patriot Towers, Inc. acquisition procedures and practices. * Must take and follow detailed instructions * Ability to understand basic and intermediate steel fabrication and installation. Education/ Experience: * High School Diploma / GED * 1-3 Years related experience * Certified Welder 3G & 4G * OSHA 10hr Certification (company will provide) Basic Abilities: * Basic math, reading, writing and computer skills * Must be able to use common sense and solve problems independently Physical Demands: * Must be able to lift and or move up to 50lbs independently. Must be able to lift and or move up to 100lbs with help * Must be able to stand, crawl, crouch, reach and walk for extended periods of time * Must be able to climb and descend a ladder without help * Ability to climb to heights greater than 500ft Other: * Must have and maintain a clean driver's license, CDL preferred * Must be able to travel overnight during the week and weekends Patriot Towers is proud to be an EEO/AA and Veteran-Friendly employer. Pre-employment drug screening and criminal background check required. Only candidates whose profiles closely match requirements will be contacted during this search. Must be eligible to work in this country. This is a full time position

Entry level weld position who is responsible for continuing to learn the fundamental TIG welding procedures and techniques on a variety of metals and applications within 1 year of being awarded position. Upon successful completion of requirements for this position, employee will be promoted to Welder II. Key Responsibilities: Complete On the Job Training Traveling to offsite training may be required Read and interpret engineering drawings Assemble parts prior to welding; ability to understand part fit-up and clearance requirements Weld production grade hardware Perform visual weld inspection, including under 10x magnification Ability to section and polish hardware so that weld penetration can be evaluated Basic understanding and able to explain the use of backup gases (argon) Develop understanding of weld terminology (i.e. Drop thru, negative/positive welds, porosity, etc.) Use gage tools such as calipers, micrometers, feeler gauges, pin gages, and comparator Upon completion of training, ability to work on multiple welds per certifications as a Welder II Meet standard work requirements at operation Other tasks as directed by management Certification Criteria: Maintain weld certification & sign-off obtained as a Weld Trainee Complete one of the two following training options: Option A Obtain S-558 Certification Certify on two S-558 weld types Obtain Work Instruction Sign-off for at least one part within each of the two new certifications Option B Certify on four non S-558 weld types Obtain Work Instruction Sign-off for at least one part within each new certification. Required Qualifications: High school diploma or equivalent. Pass Eye Exam as prescribed under AA TECH Quality Policies Completed Weld Safety Training Completed AA TECH on the Job Training for both Basic and Advanced Weld Operator Completed AA Tech Weld Trainee position requirements. Key Competencies: Mechanical aptitude Attentive to detail Ability to perform problem-solving Good manual dexterity and hand eye coordination Ability to work in a sitting position for a full shift of work Due to the Company's military contractor status, the applicant must be a U.S. citizen or a permanent resident of the United States and must provide evidence of citizenship or immigration status upon applying for the position. Advanced Atomization Technologies, LLC is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state or local laws. ("Minority/Female/Disability/Veteran/VEVRAA Federal Contractor”). Typical Mental and Physical Demands: While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips. In addition to the key responsibilities listed above, this position requires successful completion of all other duties assigned by management.

Prepares and welds all joints to AWS D1.1 structural steel welding code standard. Operates semi-automatic welding equipment to join metal parts using the gas metal arc welding process. Cleans and repairs welds with grinders, plasma gougers, other equipment, and methods common to the welding trade. Essential Duties and Responsibilities Fabricate components by following requirements; using equipment to clean, prepare, burn, and weld pieces, utilizing power and hand tools as necessary Read specifications, blueprints and/or sketches to repair or modify metal parts Verify welding results by inspecting welds; Check angles and gap allowances using micrometers and calipers. Maintain accurate and timely documentation by completing necessary records (job order, router tracking) Maintain safe work environment by following procedures, complying with legal and company regulations Safely operate electric cranes to transport workpieces (pipe) and metal components Note: The above description is illustrative of tasks and responsibilities. It is not meant to be all inclusive. Employees are required to follow appropriate supervisory direction and perform other related duties as required. Qualifications Minimum Qualifications (Knowledge, Skills, and Abilities) At least 1 year of Welding and Fabrication experience; Ideal Group will certify in AWS D1.1 Structural Steel Welding Possess basic knowledge of computer systems and equipment maintenance Must be able to communicate effectively with leadership and teammates Must have the ability to read/write and understand both verbal and written work instructions in English, work orders and customer specifications Basic math and measurement skills required (addition, subtraction, decimal and fraction conversions); able to accurately read a tape measure Must be at least 18 years of age Must have reliable transportation Must have authorization to work in the United States Minimum of High School Diploma or equivalent preferred PHYSICAL DEMANDS AND WORK ENVIRONMENT Able to lift and/or move up to 50 pounds as needed Able to stand (85%); walk (10%); stoop, kneel, bend or crouch (5%), as required Frequent twisting, horizontal reaching, upper extremity push/pull, bending Able to wear required PPE; ear plugs, safety glasses, steel-toed boots and welding gear Most of the year temperatures inside the plant will match or exceed the outdoor conditions as bay doors remain open Weld smoke and metal-cutting machine filtration systems minimize smoke but do not eliminate it. Air quality is below OSHA PEL (Permissible Exposure Limits) guidelines; therefore, Respirator use not required by standard, Voluntary Use only- must have medical evaluation prior. *** IDEAL MANUFACTURING IS COMMITTED TO LEVERAGING THE TALENT OF A DIVERSE WORKFORCE TO CREATE GREAT OPPORTUNITIES FOR OUR COMPANY AND OUR PEOPLE. IDEAL MANUFACTURING, INC. IS AN EQUAL OPPORTUNITY EMPLOYER AND DOES NOT DISCRIMINATE BASED ON RACE, COLOR, RELIGION, SEX, SEXUAL ORIENTATION, GENDER IDENTITY, NATIONAL ORIGIN, DISABILITY, AGE, OR VETERAN STATUS, OR ANY OTHER LEGALLY PROTECTED CHARACTERISTICS WITH RESPECT TO EMPLOYMENT OPPORTUNITIES. IDEAL WILL MAKE REASONABLE ACCOMMODATIONS FOR KNOWN PHYSICAL OR MENTAL LIMITATIONS OF OTHERWISE QUALIFIED EMPLOYEES AND APPLICANTS WITH DISABILITIES UNLESS THE ACCOMMODATION WOULD IMPOSE AN UNDUE HARDSHIP ON THE OPERATION OF OUR BUSINESS.

This position includes enrollment in our 20-week, Arc & Flame Training Program in Rochester, NY. The $11,000 training cost is covered. Compensation and benefits begin at the start of your training date. Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate. Key Results Areas by level of work Level I: Quality - Complete and accurate work performed efficiently 1. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed * Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. * Investigates special welding instructions to conform to Quality Assurance requirements. * Slag work; examines weld for size of bead, penetration and quality continuous code welding and testing. * Visually examines completed weld for size of bead, penetration and quality. * Understand and work with complicated standards or special structures and weldments involving a number of parts and details, using clamp, tack weld, jigs, fixtures, and turning rigs. * In preparation of surfaces to be welded, will use a variety of tools such as grinder, chippers and arc gouging equipment. * Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. * Uses an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions * Consistently meets customer's quality requirements and expectations. 2. Follow instructions - oral and/or written * Can properly read all blueprint and work instructions * Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. * Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate. 3. Safety & housekeeping * Work may require use of scaffold, ladders, forklift, and/or scissor lift. * Work may require the use of a crane to move part. * Maintains a clean work area with no clutter. * Practices safety at all times while at work. * Follows safety policies and procedures and speaks up when others are non-compliant. * Wears all safety equipment for area of work. 4. Continual Improvement suggestions * Keeps an open mind to others continuous improvement suggestions * Bring continuous improvement suggestions to the appropriate team member. 5. Professional Development * Demonstrates initiative, positive attitude, and enthusiasm for the job * Will follow up with supervisor on professional development goals and opportunities * Takes an interest and lets it be known that they have a desire to grow with the company Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training * Technical Trades School in Welding * High school GED Required Experience: * 1+ years of welding experience. Other: * Must be willing to work overtime as required. * Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: 1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. 2. Strong organization and time management skills. 3. High attention to detail. 4. Demonstrate behavior consistent with company values. 5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. 6. Exhibits polite and professional communication via phone, e-mail and mail. 7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. 8. Maintain a collaborative relationship with internal and external stakeholders. 9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. 10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. 11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. 12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. 13. Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization Must be able to work in the U.S without sponsorship. Salary Description $21.62/hr

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Welder Your Role: The welder is responsible for welding various sheet metal parts to both commercial, AWS and ASME standards via customer drawings. The welder will use the following processes GTAW, GMAW-S and GMAW-P on common base metals such as, but not limited to Aluminum, Stainless Steel and Cold Rolled Steel. Reports To: Welding Supervisor Essential Functions: Weld components using various techniques Follow and comply with all safety and work rules and regulations Proficiency with metal fabrication tools that are common with the Welding industry. Maintain departmental housekeeping standards Good organizational, communication and problem-solving skills Proficiently read and interpret blueprints and technical drawings Perform quality checks to ensure that fabricated metal components meet the required standards and specifications. Collaborate and work with team members to complete projects on time and according to customer requirements. Rig and lift heavy objects safely Additional duties as needed and assigned. Required Qualifications: 3+ years MIG/TIG welding experience and/or technical school or equivalent combination. Highschool, GED or equivalent is required Familiarity with AWS standards preferred Proven experience as a fabricator/welder or similar role Understanding of welding symbols Knowledge of relevant codes, standards, and safety regulations Work Authorization: US Persons PEKO Perks: Competitive Total Rewards Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: Compassion: We care for our talented and loyal PEKO family. Safety: A commitment to providing a safe, clean, and positive workplace. Integrity: We believe in transparency, honesty, and respect for all stakeholders. Agility: We are dedicated to a financially prudent organization. Endurance: Fostering the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $21.00 - $29.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR XZOCxYPEr7

Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description Under the direction of the Welding Group Leader or Supervisor, the Welder works from customer drawings and a traveler to fabricate and weld components to produce the highest quality products at the lowest cost, while meeting departmental performance standards, customer specifications and delivery requirements, in accordance with company policies and procedures. A Class A Welder is capable of performing all aspects of welding. Can weld any type of project while consistently meeting or exceeding cycle times. Have the ability to fabricate from prints without the aide of fixtures. Able to do prototypes while also working with engineering to develop fixtures. Capable of being certified. Requires little to no supervisor and has the ability to interpret blueprints and understands weld symbols at an advanced level. Minimum Qualifications: Job knowledge through suitable education or prior work experience Have the ability to regularly lift and/or move 25-50 pounds Meet minimum 20/20 vision standards (with corrective lenses if needed) Score a minimum score on the in-house welding test Knowledge on how to set-up weld machine and lay a quality bead for both Mig and Tig Ability to read and understand blueprints and weld symbols at an advanced level Knowledge of the metric system preferred Accurately measure and lay out locations for welded components Adjust weld as needed to accommodate varying thicknesses of steel Operate grinder, drill, band saw, torch Complete and maintain all required paperwork, records, documentation, etc. Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards Specific Duties: Using MIG and/or TIG, weld components together according to blueprints and Traveler While performing the duties of this job, the employee is regularly required to stand, use hands, stoop, kneel, or crouch. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Must work at a reasonable pace (measured by production efficiency) and within our quality standards to insure timely completion Check and verify part numbers prior to assembly of product to customer specifications Notify supervisor of part shortages before the part runs out Protective clothing/equipment requirement: Must supply his/her own welding helmet and safety shoes Requires the use of safety glasses and shoes, welding helmet, grinding shield, tight-fitting clothing without tears, hearing protection and gloves This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Layout Fitter-Welder will be a single classification that applies to all welders in vessel fabrication (including touch-up), vessel reglassing, and jacket weld. Within the overall classification there will be three skill groupings, or hierarchies of skills, one for each major work center. The three skill groups and the rate potential of each is as follows: Fabrication: RC 11 - Set-up, all of old job #22, T-up repair, SMAW of x-ray quality, grinding operations as listed below. Ability to train in set-up or touch-up. RC 13 - RC 11 functions above plus TIG, FCAW, and manual MIG processes. Set-up. Nozzle welding, on or off positioner, x-ray quality. Grinding operations as listed above. All layout. All duties previously contained in jobs 22-27. Trains others. Able to solve production and quality problems with little supervision. Additional skills - X-ray repair. Automatic SAW and machine GMAW. C/S to S/S, S/S to S/S, and inconel qualified. Make or assist in making templates and fixtures. All Cell One functions including grinding, small head layout, nozzle swage and trim as required for single operator completion of vessels at Cell One. RC 14 - All of above. Ability to direct the efforts of others within the cell or department. Jacket Weld: RC 12 - Set-up as described in old job # 30. Grinding operations as listed. All SMAW processes. Trains others. Set-up problem-solving ability. Able to solve production and quality problems with little supervision. RC 13 - SMAW, FCAW, TIG, GMAW manual. Jkt set-up as required. All layout. Able to solve production and quality problems with little supervision. Follows all current procedures for production, quality, and safety. Additional skills - Overhead welding. Welding on glass. Operation of large automatic. Carbon steel to stainless, stainless to stainless, and inconel qualified. All small jacketing cell operations including grinding and jacket hydro of small vessels as required for single operator completion in cell. Makes or assists in making templates and fixtures. RC 14 - All of above. Ability to direct the efforts of others within the department. Reglass: RC 11 - Entry level. Set-up as above. All grinding operations as below. SMAW, FCAW of X-ray quality. Jacket cut-off, other operations on reconditioned materials RC 13 - All duties previously performed under jobs 22-27. Set-up of all components as in fabrication above. SMAW, TIG, FCAW. X-ray quality welding. Grinding operations as listed above. All layout. Trains others. Able to solve production and quality problems with little supervision. Additional - X-ray repair, all aspects. Hand-forming of special parts as required for proper fit. Carbon steel to stainless, stainless to stainless, Inconel welding qualifications. Installation of all patches in all configurations. RC 14 - All of above. Able to direct the efforts of others within the department. The above descriptions of the RC13 levels for each skill group within the new classification list a group of basic skills, which are required for entry into the classification, followed by another group referred to as "additional." Although not all members of the group will be able to perform all of the additional skills, at least at first, everyone is required to know some of them and to learn the others as time permits and production/customer needs require. All members of the group will follow all current standard operating procedures. All members are responsible for the quality of their workmanship and must follow all safety and housekeeping procedures and work in a safe manner at all times. All members of the group will train others in the various functions. Light grinding operations are included in the layout welder-fitter job. Grinding that may be required of all members of the class in any department include: Corrective grinding as required before tacking or welding a joint. Responsibility for the correct preparation of the joint is assumed by the act of welding. Backgrinding of tack welds. Interpass cleaning. Backgrinding of nozzles or patches after backgouging or cutting out. Adjustment of bevels or taper by cutting and/or grinding as needed for correct fit-up in head set-up and jacket set-up areas, or in head or shell nozzle or patch set-up. Prep grinding of torch cut surfaces prior to welding or tacking components. Use of grinder to remove rust, scale, spatter, flux, or other contaminants from surfaces. Grinding and dyechecking internal to x-ray or dyecheck or leak repair. Any and all grinding necessary in the process of repairing defective or cosmetically substandard work of the welder's own making. Responsible for quality, safety and housekeeping in their job assignment and follows current SOPs. Certifications/Requirements: Crane Operation, Tow Motor, Welding Housekeeping: Keeps area clean and puts tools away Employer's Disclaimer: All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship and in accordance with the Collective Bargaining Agreement.

Second Shift 2:00PM - 10:30PM Clarence, NY 14031 *Must have reliable transportation* Pay Rate: $21 - $23/hour (based on experience) Job Summary for Welder: Works from a job traveler to fabricate and weld components to produce quality compliant products, while meeting departmental performance standards, customer specifications and delivery requirements. Essential Duties and Responsibilities for Welder: Using MIG and/or TIG, weld components together according to blueprints and job traveler Check and verify part numbers prior to assembly of product to customer specifications Accurately measure and lay out locations for welded components Adjust weld as needed to accommodate varying thicknesses of steel Non-essential Duties for Welder: Operate grinder, drill, band saw, torch and crane as assigned Complete and maintain all required paperwork, records, documentation, etc. including accurately completing daily labor card and submitting at conclusion of shift Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards Assist in training new employees in safe and efficient use of fabricating and welding methods Notify supervisor of part shortages before the part runs out Requirements Knowledge, Skills, and Abilities for Welder: Reads and accurately interprets blueprints at an advanced level Able to learn operations of multiple jigs/fixtures within a job area and must be able to regularly rotate jobs to meet schedules Skill level includes MIG, TIG and pipe welding capabilities as outlined in attached level breakdown Must work at a reasonable pace (measured by production efficiency) and within quality standards to insure timely completion Able to follow directions and perform repetitive tasks Ability to understand and carry out detailed written and oral instructions. Experience and Education for Welder: High School Diploma 2-4 years previous welding experience with non-structural components Must successfully complete in-house welding test Salary Description $21 - $23/hour

Full-time Description This position includes enrollment in our 20-week, Arc & Flame Training Program in Rochester, NY. The $11,000 training cost is covered. Compensation and benefits begin at the start of your training date. Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate. Key Results Areas by level of work Level I: Quality - Complete and accurate work performed efficiently 1. Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. Investigates special welding instructions to conform to Quality Assurance requirements. Slag work; examines weld for size of bead, penetration and quality continuous code welding and testing. Visually examines completed weld for size of bead, penetration and quality. Understand and work with complicated standards or special structures and weldments involving a number of parts and details, using clamp, tack weld, jigs, fixtures, and turning rigs. In preparation of surfaces to be welded, will use a variety of tools such as grinder, chippers and arc gouging equipment. Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. Uses an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions Consistently meets customer's quality requirements and expectations. 2. Follow instructions - oral and/or written Can properly read all blueprint and work instructions Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate. 3. Safety & housekeeping Work may require use of scaffold, ladders, forklift, and/or scissor lift. Work may require the use of a crane to move part. Maintains a clean work area with no clutter. Practices safety at all times while at work. Follows safety policies and procedures and speaks up when others are non-compliant. Wears all safety equipment for area of work. 4. Continual Improvement suggestions Keeps an open mind to others continuous improvement suggestions Bring continuous improvement suggestions to the appropriate team member. 5. Professional Development Demonstrates initiative, positive attitude, and enthusiasm for the job Will follow up with supervisor on professional development goals and opportunities Takes an interest and lets it be known that they have a desire to grow with the company Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training · Technical Trades School in Welding · High school GED Required Experience: · 1+ years of welding experience. Other: · Must be willing to work overtime as required. · Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: 1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. 2. Strong organization and time management skills. 3. High attention to detail. 4. Demonstrate behavior consistent with company values. 5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. 6. Exhibits polite and professional communication via phone, e-mail and mail. 7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. 8. Maintain a collaborative relationship with internal and external stakeholders. 9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. 10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. 11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. 12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. 13. Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. · Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. · Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization Must be able to work in the U.S without sponsorship. Salary Description $21.62/hr

* Working from drawings, specifications, bills of material, material specifications, welding instructions and codes, sets up, fits, clamps, bolts and tack welds diversified structural and weldment assemblies in accord with dimensional and alignment requirements. Requires knowledge of welding technology in addition to welding experiences; fulfills ASME section IX Welding Qualifications. Provides leadership and guidance to helpers and others as they may be assigned to assist. . Key Results Areas by level of work: Level I: Quality - Complete and accurate work performed efficiently * Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed * Working from drawings, specifications, manuals, codes, etc., determines the sub-assemblies necessary, the centerlines and quadrant locations for shell openings. * Directs or personally cuts out these openings. * Fits up and tack welds nozzles, plates, lift lugs, couplings and reinforcements specified for large units. * Makes temporary fixtures when standard fixtures are not available. * Sets up face block, jogs and fixtures in proper locations to minimize the effect of heat, weld distortion and shrinkage during subsequent welding operations. * Repairs and straightens damaged or bent parts. * Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. * May design and make templates. * Is alert to subsequent machining allowances * May consult with welder on methods to offset effects of heat on dimension alignment to obtain final dimension and weld appearance. * May be involved with Supervisor and Drafting/Engineering when corrective action is required because of non-conformities or drawing errors. * Where products are repetitive, may fabricate and construct fixtures, position riqs and their devices to expedite production. * Uses an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions * Consistently meets customer's quality requirements and expectations. * Follow instructions - oral and/or written * Can properly read all blueprint and work instructions * Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. * Performs other duties as assigned by the Production Supervisor, or his/her designate. * Safety & housekeeping * Work may require use of scaffold, ladders, forklift, and/or scissor lift. * Work may require the use of a crane or hoist to move part. * Maintains a clean work area with no clutter. * Practices safety at all times while at work. * Follows safety policies and procedures and speaks up when others are non-compliant. * Wears all safety equipment for area of work. * Continual Improvement suggestions * Keeps an open mind to others continuous improvement suggestions * Bring continuous improvement suggestions to the appropriate team member. * Professional Development * Demonstrates initiative, positive attitude, and enthusiasm for the job * Will follow up with supervisor on professional development goals and opportunities * Takes an interest and lets it be known that they have a desire to grow with the company Requirements Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training * High school Diploma/GED * BOCES or trade school or its equivalent in on the job training Experience: * Knowledge of welding * Competent in use of material handling equipment Other: * Must be willing to work overtime as required. Skills: To perform the job successfully, an individual should demonstrate the following competencies: * Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. * Strong organization and time management skills. * High attention to detail. * Demonstrate behavior consistent with company values. * Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. * Exhibits polite and professional communication via phone, e-mail and mail. * Maintain strict confidentiality regarding company matters. * Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. * Maintain a collaborative relationship with internal and external stakeholders. * Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. * Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. * Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. * Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment. * Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. * Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Salary Description $22.00-$31.00