Welder jobs in Grenada, MS

For more than 100 years, Modine has solved the toughest thermal management challenges for mission-critical applications. Our purpose of Engineering a Cleaner, Healthier World means we are always evolving our portfolio of technologies to provide the latest heating, cooling, and ventilation solutions. Through the hard work of more than 11,000 employees worldwide, our Climate Solutions and Performance Technologies segments advance our purpose with systems that improve air quality, reduce energy and water consumption, lower harmful emissions, enable cleaner running vehicles, and use environmentally friendly refrigerants. Modine is a global company headquartered in Racine, Wisconsin (U.S.), with operations in North America, South America, Europe, and Asia. For more information about Modine, visit modine.com. Position Description Operator joins tubing, sheet metal and studs together by brazing, welding or soldering, using tools such as oxygen acetylene torch, arc welder, heliarc, stud welder and tig weld. Assist in personnel training as required Key Responsibilities * Ability to interact with others and be self-motivated to maximize production. * Read and understand blue prints. * Operate and read all measuring devices * Organize and set up work. * Required to stand constantly, walk occasionally, bend frequently, squat occasionally, and reach forward frequently. These motions are sustained and repetitive. * Good safety habits are a must as caution is required in preparing the welder for operation. Safety glasses are required at all times, and to avoid eye injury a welding helmet is required when engaged in actual welding activity. Employees are required to frequently lift up to 50 lbs. or more with assistance and must use proper body techniques when performing floor, knee, and waist lifts. * Welder is exposed to heat and fumes that may be somewhat disagreeable. * Requires employee to perform other jobs in the cell as needed. Required Education & Qualifications * 2 years welding experience preferred. * Must be able to be 6G, 3F and 5F certified by an outside welding certification body. * Requires ability to use MIG/TIG welders to join metal to close tolerances. Various metals may be required, some of which are galvanized steel, aluminum, copper, and stainless steel. * Requires ability to read and interpret complicated shop drawings. * Requires understanding of standardized welding symbols used on shop drawings to convey method of welding. * Requires a strong mechanical background as well as the ability to use simple math with both decimals and fractions. * Must wear safety protective equipment at all times. * Minimal travel involved, but may be required. * This list is not all inclusive and other duties may be assigned as necessary. Modine is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by law. Modine provides a competitive benefit package, which could include paid vacation, short term disability, 401(k), health, dental, vision, life insurance, flex spending benefits, tuition reimbursement, Health Savings Account and much more. Human Resources will provide more detail upon your hiring.

Job Description: Pipe WelderDay shift pay: $42.00Night shift pay: $43.00Per-diem: $180.00Sign-On Bonus: $1,000 Responsible for performing pipe welding procedures on Stainless Steel and Copper-Nickel pipe using Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding. The shipyard environment is an around the clock manufacturing setting. Production areas at times involve working at different heights, confined spaces, different weather conditions as well as multiple shifts 24 hours a day. As with most every position in the shipyard, a Welder may be required to work either day or night dependent upon the number of ships under construction at any one point in time. Client stresses the practice of working safely in all situations with safety procedures meeting, and most times, exceeding industry standards. Types of metal materials with a variety of welding processes; the most basic of which are, Shielded Metal Arc Welding (SMAW) also known as "stick welding” and Flux-Core Arc Welding (FCAW) also known as “wire welding.” Must pass military standard X-Ray welding test on stainless steel and copper nickel in the 6G position (restricted). The pipe welding test is given in a restricted position (6 G) on a 5'' schedule 80 carbon steel pipe. GTAW (TIG) process used for root pass, 11018 electrode used for weld fill portion and cap. Basic Qualifications: Minimum 3 years of Pipe Welding experience. Must have experience in Gas Tungsten Arc Welding (GTAW), also known as Tungsten Inert Gas (TIG) welding Shielded Metal Arc Welding (SMAW) also known as "stick welding” . **Work is locate d in Pascagoula, MS Safety & Environmental Factors: All employees are expected to adhere to the company's safety policies to maintain a safe and healthy work environment. This role involves working under extreme hot or cold conditions and requires the physical ability to stand for the entire shift, use hands for various tasks, ascend stairs, balance, stoop, kneel, crouch, talk, and hear. Team members must occasionally lift items weighing up to 50 lbs. Specific vision abilities required include close, distant, and peripheral vision, depth perception, and the ability to focus. BenefitsAs part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: Medical Coverage Dental Coverage Vision Coverage Short Term Disability Benefits Term Life Benefits * Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law.

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina with offices spanning the United States, primarily southeast and central United States. Position Description Lay out, fit, and weld fabricated, cast, and forged components to assemble structural forms. This will be completed in a safe and timely manner with the highest quality possible. Job Responsibilities * Lay out, position, align, and secure parts and assemblies prior to assembly. * Examine work pieces for defects and measure work pieces to ensure conformance with specifications. * Weld together metal components of products such as piping systems, plate, pipe and tube or structural shapes, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment. * Obtain specified electrode and insert electrode into portable holder or thread consumable electrode wire through portable welding gun. * Connect cables and adjust welding unit to obtain amperage, voltage, polarity, and pulse, as specified by welding procedure or supervisor. * Start power supply to produce electric current. * Strike (form) arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. * Manually guide electrode or gun along weld-line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. * Weld in flat, horizontal, vertical, or overhead positions. * Examine weld for bead size and other specifications. * May manually apply filler rod to supply weld metal. * May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. * May prepare broken parts for welding by grooving or scarfing surfaces. * May remove excess weld, defective weld material, slag, and spatter, using carbon arc gouge, hand scraper, grinder or power chipper. * May preheat work piece, using hand torch or heating furnace. * May position and clamp work piece together or assemble then in a jig or fixture. * May tack weld assemblies together. * May cut metal plates or structural shapes. * May fit up parts (pipe, tube, structural shapes, or plate) and inspect fit before welding. * May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded-Metal Arc welding processes. * Respiratory protection is common and may be required. * Responsible for observing and complying with all safety and project rules. * Other duties as assigned. Job Qualifications * Must be at least 18 years of age. * Must be able to TIG and stick weld on stainless and/or carbon (pipe size and material welded varies per site). * Must pass required weld tests (varies per site). * Must be willing to work outside craft. * Workers are surrounded by hot materials and strong light. * Must wear safety gear, including protective goggles, masks, face shields and safety shoes. * Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor. * Utilize basic math and a calculator to solve geometric problems associated with Instrument Fitting. * May be required to work outside and be subject to severe weather as well. * Employee must be able to climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments. * Candidate may be required to pass a drug test and criminal background check based on job location/requirements. * Required Tool List For Pipe Welder: * Must have own TIG Rig and Stinger * 1 each 12" Crescent Wench * 1 each Stinger (whip) for Stick Welding * 1 each Tig Rig w/Hose and Gauges * 1 each 25' Tape Measure * 1 set Burning Goggles * 1 each Chipping Hammer * 1 set Brushes * 1 pair Welding Gloves * 1 pair Leathers (optional) * 1 each Welding Hood and Lens (Must be attached to hard hat or will attach to hard hat) * *No Soft Cap Hoods * Must be at least 18 years of age * Must be able to lift 50 pounds, climb, bend, twist, stand and reach repetitively. * Work in hot/cold/damp/cramped environments * 40 or more hours per week with possible weekend work * Background check and drug screen based on job location/requirements Benefits * We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************** Email: *********************************** Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English To see other positions, click here.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: * Read blueprints and other customer specifications/drawings. * Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). * 6GR Requirements * Minimum 8 years of naval/commercial welding experience. * Must have reliable transportation. * Familiar with OSHA regulations relative to the shipbuilding industry. * Pass hair follicle test and background check. * Comfortable with heights and in confined spaces. * Lift 50lbs without assistance. * Must understand the layout of the ship and compartment identification. * Basic reading, writing and math skills required. * Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: * Health * Dental * Vision * Voluntary Life/Voluntary AD&D * Short-Term Disability * Long-Term Disability * Hospital Indemnity * Accident * Critical Illness * 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability Apply Now Apply Now Share via Email Location Gulfport, ms Type Full-time Posted Date April 11, 2025 Compensation * Don't Miss Out Sign up to be notified of new jobs that match this search. Email This field is for validation purposes and should be left unchanged. Email CAPTCHA Get Notified Δ

Job Description Build or repair Pipe in Fabrication Shop, or repair in Ship-Yard setting Cut, shape, fit, or join Pipe or other construction materials with torch Cut and Bevel Perform safety inspections in construction or resource extraction setting Read and interpret blueprints and Bluebook Use measuring devices in construction math calculations Understand Take-Off's & specifications Move or lift heavy objects using Overhead Crane and Rigging Plan or organize work read technical drawings Determine project methods and procedures Fitting tools such as (tape measure, square, level, grinder, torch) Examine products or work to verify conformance to specifications Use hazardous materials information, adhere to safety procedures Pipefitter with 4+ years of shipyard experience. Pass a drug screen and physical Written Pipefitters test required along with skills test

HUTCO, INC. Pipe Welder Hutco Branch: Moss Point, MS Rate of Pay: $40.00 per hour and $180 per diem for those who qualify Description: Pipe Welders are responsible for preforming pipe welding procedures on Stainless Steel and Copper-Nickel pipe using the TIG welding process. Requirements: Minimum 4 years of experience as Pipe Welder Must have GTAW (TIG) and SMAW (STICK) experience Must be able to pass X-Ray welding test on stainless steel and copper nickel in the 6G position (restricted) Pipe Welding test is given in a restricted position (6G) on a 5” schedule 80 carbon steel pipe. GTAW (TIG) process is used to weld the root pass and an 11018 electrode is used to weld the fill portion and cap. This is for X-ray quality. Must pass drug test (HFT) and E-Verify Must be able to work all shifts Must be able to work in confined spaces, ascend and work at heights, under all weather conditions. Benefits: A limited benefit plan is available to Hutco, Inc. employees through Essential Staff Care. Available plans include: Medical/Prescription Dental Coverage Vision Coverage Short Term Disability Benefits Term Life Benefits Accidental Death & Dismemberment Benefit CONTACT HUTCO TODAY! Apply ONLINE or at the MOSS POINT branch: 6043 Hwy 63, Suite 2 Moss Point, MS 39563 Contact: Brandi ChoatePhone: ************ E-mail: ******************** #HUTCOSP Hutco is an Equal Opportunity Employer (EOE).

Job Summary**Resume is a Must, please include date of birth, city and state of birth and Social Security number when applying. This information is requested before testing day. Pipe Welder Job DescriptionThe Pipe Welder is responsible for welding and assembling pipe systems in accordance with blueprints, specifications, and industry standards. This role requires precision welding techniques to ensure strong, leak-free, and durable joints for piping systems used in shipbuilding, marine, and industrial applications.Key Responsibilities: Perform welding on carbon steel, stainless steel, copper-nickel, and other alloys using SMAW, GTAW, and/or GMAW processes. Read and interpret blueprints, drawings, and welding symbols to determine job requirements. Fit, align, and tack-weld pipe components in preparation for final welding. Inspect and test completed welds to ensure compliance with safety and quality standards. Maintain welding equipment and ensure proper use of tools and consumables. Adhere to OSHA, company, and shipyard safety policies and procedures. Collaborate with pipefitters and supervisors to meet production schedules. Qualifications & Skills: Minimum 2-5 years of pipe welding experience in shipyards, industrial plants, or construction. Strong knowledge of welding procedures, codes, and standards (AWS, ASME). Ability to work in confined spaces, at heights, and in various environmental conditions. High attention to detail and commitment to quality workmanship. E04JI802qiff407q2x9

Team: 21 Pipe Entity: Ingalls Shipbuilding No Full-Time Shift: Multiple Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No We're building tomorrow's fleet today With more than 11,000 employees, HII's Ingalls Shipbuilding division is the largest manufacturing employer in Mississippi and a major contributor to the economic growth of Alabama. For nearly 85 years, we've designed, built and maintained amphibious ships, destroyers, and cutters for the U.S. Navy and the U.S. Coast Guard. The largest supplier of U.S. Navy surface combatants, we're simultaneously building four classes of ships and have pioneered the development and production of technologically advanced, highly capable ships for the surface Navy fleet for decades. Think that's cool? Keep reading: Position Overview With surgical precision the Ingalls First-Class Pipewelders seal together the vital piping networks supplying our ships their various chemicals, steam, ventilation, and heating and cooling systems. Our Pipe Welders are among the best in the world and stound out in their field. Does that sound like an interesting way to make a great living? Then a rewarding career as an Ingalls Shipbuilding Pipewelder awaits you at Mississippi's largest manufacturing employer and “America's Shipyard”. Since 1938, Ingalls workforce has done their part in helping our nation by constructing nearly 70 percent of our US Navy's fleet of ships. If you possess the talent, skill, ability or even the willingness to learn, perhaps you have what it takes to become a valued team member. Job Description An Ingalls Pipewelder is responsible for performing pipe welding procedures on Stainless Steel and Copper-Nickel pipe using Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding. Types of metal materials with a variety of welding processes; the most basic of which are, Shielded Metal Arc Welding (SMAW) also known as "stick welding” and Flux-Core Arc Welding (FCAW) also known as “wire welding”. The shipyard environment is an around the clock manufacturing setting. Ingalls shipyard production areas at times involve working at different heights, confined spaces, different weather conditions as well as multiple shifts 24 hours a day. As with most every position in the shipyard, a Welder may be required to work either day or night dependent upon the number of ships under construction at any one point in time. Ingalls stresses the practice of working safely in all situations with safety procedures meetings, and most times, exceeding industry standards. Basic Qualifications Minimum of 3 years of pipewelding experience. Must have experience in Gas Tungsten Arc Welding (GTAW), also known as Tungsten Inert Gas (TIG) welding, and Shielded Metal Arc Welding (SMAW), also known as "stick welding”. Preferred Qualifications Mississippi Tech Master Certification Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to ************************** and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call ************** for assistance. Press #1 for Ingalls Shipbuilding.

CTR Group is seeking a Pipe Welder for our client in Louisiana. Immediate openings and urgently hiring! What We Offer: Weekly Pay - you receive a paycheck every week Comprehensive Benefits Package Safety First! Pay: Based on experience *Per diem is available for non-local employees* RESPONSIBILITIES: Read and interpret basic drawings, blueprints, and weld symbols. Successfully complete company weld tests, including procedures in the 6GR position. Pass company TIG weld test procedures for Carbon Steel, Stainless Steel, and Copper-Nickel (CUNI) pipe. Follow company housekeeping procedures to maintain a safe and organized work environment. Inspect work, identify potential issues, and take corrective actions as needed. Support and promote quality procedures within the department. Collaborate as a productive team member to meet daily goals set by the supervisor. Communicate effectively and adapt to changing priorities within the team. Contribute to building a positive team environment. Demonstrate pride in workmanship and quality through on-the-job training. Participate in innovation and productivity improvement initiatives. Assist in minimizing waste of materials, consumables, and other resources. Support the supervisor in maintaining department equipment and ensuring proper upkeep. Provide and maintain a full set of personal tools required for the role, or request reasonable accommodation as needed. Work toward the team goal of delivering projects on schedule. Arrive prepared and ready to begin work at the start of each shift, subject to reasonable accommodation. Adhere to company guidelines and procedures, including attendance and break schedules, subject to reasonable accommodation. REQUIREMENTS: Perform TIG welding on carbon steel, stainless steel, and copper nickel pipe. Successfully pass “A Class” skills validation test for restricted open root welds. Complete onboarding procedures and meet 6GR weld qualification test requirements for copper nickel, carbon steel, and stainless steel to fulfill contract requirements for A Class welding on the vessel. Safely and appropriately use required tools and equipment. Properly utilize personal protective equipment (hard hat, safety glasses, steel-toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) in compliance with OSHA standards. Work in environments with varying temperatures (hot and cold). About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified. California Consumer Privacy Act Statement We value your privacy and are committed to protecting your personal information. In accordance with the California Consumer Privacy Act (CCPA), you have the following rights: Right to Know: You can request details about the personal information we collect, use, and share. Right to Delete: You may ask us to delete your personal information, subject to certain exceptions. Right to Opt-Out: You can opt out of the sharing of your personal information. Personal information is only shared to prospective employers with your permission. We never sell personal information. Right to Non-Discrimination: Exercising your CCPA rights will not result in any discrimination. For more information or to exercise your rights, please contact us at ************.

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

We build what the future runs on. Accelevation designs, manufactures and installs the physical infrastructure that powers today's most advanced technologies. We've grown over 440% in the last 18 months because we take ownership, solve hard problems, and build with purpose. Join us to build the future. Position Summary A Welder is responsible for fabricating, assembling, and repairing metal structures and products using various welding techniques and equipment. This role involves setting up parts for welding, utilizing hand tools, clamps, jigs, and fixtures to ensure precision and quality. The Welder interprets blueprints, technical drawings, and welding symbols to execute work accurately. Key tasks include welding, cutting, grinding, and finishing metal surfaces to meet specifications and safety standards. Key Responsibilities Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment. Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage. Prepares, assembles, and tacks weld parts and surfaces to be welded. Maintains, organizes, and cleans equipment and the work area. Notifies Team Leader when faulty equipment or defective materials are discovered. Performs other related duties as assigned including Machine Operation. Perform Quality Control and process all required documentation. Perform Prep work and grinding. Minimum Qualifications High School diploma or general education degree (GED); or three to six months related experience and/or training; or equivalent combination of education and experience Hands on experience in welding and fabrication applications: cutting, welding/brazing, drilling, marking/engraving, welding of dissimilar metals a plus. Proficient in welding safety, weld filler selection, weld processing parameters, fixturing. Familiarity and experience with metallurgy, weld joint analysis, backing gas applications. Strong cognitive and clear communication skills which emphasize attention to detail. Self-motivated, with the ability to lead projects to completion with minimal oversight, while demonstrating significant problem-solving ability. Be able to work independently and unsupervised while prioritizing tasks. Core Competencies Safety: Proactively fosters a culture of safety in our work environment. Inclusion: Appreciates and respects individuals from diverse backgrounds, identities, values, and cultures. Speed: Operates with a sense of urgency, recognizing the competitive advantage of being swift and responsive. Innovation: Consistently seeks opportunities to simplify processes and continuously improve. Judgement: Ability to exercise discretion and lead initiatives autonomously. Accountability: Ability to hold self and others to the highest of standards. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or carry up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles, toxic or caustic chemicals, risk of electrical shock, and explosives. The noise level in the work environment is very loud where ear protection is necessary. Equal Opportunity Employer Accelevation LLC is an equal opportunity employer - Inclusion is one of our core values, as we appreciate and respect individuals from diverse backgrounds, identities, values and cultures. We enthusiastically build teams that celebrate and embrace the contributions of everyone, fostering an environment of welcome and respect for all. As a part of our pre-hire process, we may conduct a background check. We use E-Verify to confirm the identity and employment eligibility of all new hires.

Full-time Description Carrier Process Equipment Group (CPEG) is a Louisville-based company with multiple businesses specializing in material handling and processing equipment. We are looking for the BEST employees in the industry to help us grow our business at Sly in Mathiston. Welders are responsible producing quality welded products in accordance to customer and engineering specifications. Schedule: Monday through Thursday, 5 a.m. to 3:30 p.m. What you'll do Conduct all business in accordance with all company policies and safety practices. Responsible for welding products in accordance to specification. Able to be efficient with their time. Knowledgeable of product fabrication procedures. Able to execute the following type of welds: GMAW, FCAW, GTAW. Responsible for tacking and finish welding. Marginal or Peripheral Functions Knowledge of product components and how they fit together. Able to read engineering drawings in order to accurately produce equipment. Requirements Able to lift 50 lbs. Able to stand and/or walk around the plant for up to 7 hours a day. Maintain regular attendance. Able to work varied hours and shifts if required. Follow company policies and procedures. Able understand and adhere to safety policies and procedures. Able to wearing Personnel Protective Equipment (PPE), Operate equipment in a safe manner as trained. Be committed to working safely being mindful of one's own safety and the safety of co-works. Able to understand and follow directions. Excellent team player. Able to read a tape measure and/or ruler in increments of 1/32”. Understand and perform simple math. Must be dedicated to customer satisfaction. Maintain a high standard of quality of work. Understand and able to use and read a framing, square, tri square, and combination square. Able to read or learn to read mechanical prints and drawings. Qualified to or able to qualify within six (6) months to AWS Welding code - D1.1, D1.3 & D1.6 for the following processes: GMAW, FCAW, GTAW. Preferred Qualifications Minimum of High School diploma or G.E.D. Skills Integrity and Trust Results orientation Mechanical Aptitude Peer Relationships Decision Quality Problem Solving Accountability Drive for Results Competitive Benefits including: 40 Hours of PTO after 90 Days. Four-Day Workweek. Overtime Opportunities. Ability to Become an Employee Owner. Typically, employers will do a 401K company match for retirement at 3-4%. We provide the ESOP retirement plan instead because it historically provides a benefit of up to 25% of your compensation. Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Life and Short-term/Long-term Disability Insurance, and more. Fun company events. Employee Referral Program. Employee Health and Financial Wellness activities. Employee Assistance Program. Estate Planning and Travel Services (for emergencies). Educational Assistance. Endless coffee. Career advancement and professional development. Sly is a division of Carrier Process Equipment Group, Inc. (CPEG). CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure. 401(k) Plan with a loan feature. Cash Balance Pension Plan. Sly contributes to your retirement savings plan. That coupled with a guaranteed 4% rate of return means you get a consistent contribution every year. About Sly: With nearly 150 years of expertise and the first-ever patent of the cloth-type dust collector, Sly LLC is at the forefront of industrial dust collection and air pollution equipment service and customization. It is additionally known for its Windsor Wire product line, the nation's largest filter bag cage provider. Learn more at ************************ About CPEG: CPEG offers customers a comprehensive line of bulk material handling equipment and processing equipment. CPEG companies include Carrier Vibrating Equipment, S. Howes, Sly, and Heyl Patterson Thermal Processing. All companies are 100% employee-owned and are proud to offer high quality equipment and superior customer service. Learn more at ************* Salary Description $19 to $26 an hour

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As a Welder you will be welding fuel tanks and aluminum stud frames for the weatherproof or sound attenuation enclosures. Primary Responsibilities: Using MIG welding techniques, weld aluminum stud frames, walls and roof to create the enclosures Weld all secondary and supporting components for the enclosure Assemble and weld walls around fuel tanks Test welds for leaks and complete spot welds where needed Work with Quality Control to confirm all weld work is as required by specifications Additional Responsibilities: Participate in required safety program, and work in a safe manner. Additional duties as assigned by manager. Who We Are Looking For: To be successful in this position you should have a strong mechanical aptitude, training and experience with MIG welding and the desire to learn. You should possess a strong sense of urgency and desire to provide superior customer service. The ability to work safely alone and around others is essential to this position as well. Education/Experience: High school diploma or equivalent preferred. Required Qualifications/Skills: Minimum 1 year experience of MIG welding (work/hobby/volunteer) Light and medium gauge fabrication experience Able to max lift 50 lbs. without assistance Successfully read tape measure and compute basic math Preferred Qualifications/Skills: Interpret shop drawings AWS Certification Certified Flux Core welder Technical Degree or Certification Values: At Yancey Bros. Co, we are always looking to add people to our team who share our core values: Safety: We value the lives and health of our team and customers above all else. Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly. Teamwork: We work as one across our organization for the benefit of our customers. Excellence: We strive to be the best, continuously improving our customers' experience and the solutions we provide. Sense of Urgency: We respond quickly to customer needs and hold ourselves accountable for results. Ideal candidates will demonstrate the following values: Acting in a safe manner Exhibiting honesty and integrity Acting in a fair and ethical manner Team mentality Delivering quality results Embraces change / improvement Exhibiting superior customer service skills Exhibiting pride and ownership Working with a sense of urgency Exhibiting a winning attitude What We Offer: Yancey Bros. Co. offers a full benefits package that includes aggressive compensation levels, technician tool allowances, full medical, vision and dental coverage, employee wellness programs, paid vacations and more. Competitive Pay Structure Competitive Pay Individual Bonus Opportunities Available Technician Tool Allowance 401k Plan Strong Company Match Employee Profit Sharing Financial Wellness Coaching Employee Wellness Program Medical, Vision, Dental Insurance Prescription Drug Coverage Flexible Spending Accounts Short & Long Term Disability Group Life Insurance Personal Time Off Paid Holidays Paid Sick Leave Career Development Tuition Reimbursement Ongoing Training Advancement Opportunities #zr

With over 50 years' experience, ACI Building Systems, LLC. is one of the most respected customer-focused companies in the business. ACI specializes in the design, engineering, manufacturing and delivery of high-quality pre-engineered steel and premium building components. We work in a safe, positive, and engaging environment, and believe our employees are the fuel that drives our business. ACI Building Systems, LLC. is seeking a Welder-Fitter to join our growing team. The Welder-Fitter assists in the fabrication of steel frames and building components. Ability to MIG weld and fit are a plus. Responsibilities May Include, But Not Limited To: · scrapers, 7” grinders, welding hood and gouger for tools used · Safely perform skilled welding in the fabrication of steel frames and building components · Maintain proper housekeeping of assigned work area · Must always have a high awareness for safety · Any other duties assigned · Must train on company policies and procedures · Must follow welding procedures Preferred Qualifications & Experience: · Familiar/fluent in MIG processes · Previous experience with plasma torches & oxy acetylene cutting a plus · Welding certifications beneficial but not required Requirements: · Ability to lift 50lbs., bend, squat, kneel and or stand for extended periods of time · Must wear proper safety equipment · Ability to read a tape measure · Knowledge of basic math (add, subtract, multiply & divide fractions)

Insituform Technologies LLC, an Azuria Company, is looking for an experienced Fabricator. Insituform is a leading worldwide provider of cured-in place pipe (CIPP) and other technologies and services for the rehabilitation of pipeline systems. Insituform's businesses consist of sewer, drinking water and energy and mining pipeline rehabilitation and protection. The Company provides cost-effective solutions to remediate operational, health, regulatory and environmental problems resulting from aging and defective pipelines. Insituform's technologies allow its customers to avoid the extraordinary expense and extreme disruption that can result from traditional "dig and replace" methods. Position Summary The Fabricator will be responsible for fabricating various parts and equipment from blueprints and/or work orders, completing shop work orders, and rework and/or repair of existing mechanical components. Reporting Status The Fabricator/Welder reports to the Engineering Manager. Position Responsibilities & Accountabilities Primary responsibilities include the following: Fabricates various structural equipment from blueprints and work orders. Welding, metal fabrication, rigging, lifting of heavy dangerous objects in a safe manner, use of forklifts, use of scissors lifts, use of cutting equipment, torch, plasma saw, assembly and painting of projects as well as general repair and maintenance of shop equipment. Completes shop work orders as assigned. Diagnoses cause of mechanical malfunction or failure of operational equipment and performs preventative and corrective maintenance. Communicates the work schedule to the customer as required. Directly supports manufacturing operations in troubleshooting and repairing production equipment. Move parts and heavy frames on and off machinery and throughout the facility. Other duties as assigned. Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: High school diploma or GED or diploma from a technical school. Hands on experience in welding (MIG, TIG, Stick) and troubleshooting. Utility construction experience and mechanical experience. 3 - 5 of prior Fabrication/Welding experience is required. Must possess a working knowledge of fabrication methods and equipment to include CNC-milling machines, various saws, portaband, vertical & horizontal bands, lathe, milling & drilling machines, metal shear, metal lathe, sanders/grinders, power punch press, hand & power benders, rolling machine, hand brake and various power hand tools, drills, etc. Proven knowledge of the American Welding Society welding symbols and codes Language Skills: Ability to read, analyze interpret and understand and follow blueprints and fabrication drawings. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; ability to listen and comprehend instructions accurately. Mathematical Skills: Ability to add, subtract, multiply, and divide all units of measure, including whole numbers, common fractions, and decimals. Reasoning Skills: Ability to apply common-sense understanding to carry out instructions furnished in written, oral or diagram form; ability to deal with problems involving several concrete variables in standardized situations. Must be able to use independent judgment and initiative to complete projects on a timely and safe basis. Other Skills and Abilities: Must be able to read blueprints and fabricate parts and machinery and be attentive to detail. Must have forklift operator's license. Physical Demands / Work Environment: The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: In the performance of duties for this position, the employee is: regularly required to sit, talk, and hear; required to use hands to finger, handle, or feel objects, required to stand, reach with hands and arms, climb or balance, and taste or smell; regularly lift and/or move up to 50 pounds (occasionally up to 75 pounds). Vision abilities required by this job include close, distance, peripheral, and color vision, depth perception, and ability to adjust focus. Ability for extended concentration. Work Environment: In performing the duties for this job, the employee will generally work in a shop environment (with moving vehicles and mechanical operations). Will be occasionally exposed to fumes or airborne particles. The noise level is usually moderate. Travel by automobile and airplane required. We offer a Competitive Salary with Career Growth Opportunities and a Full Benefits Package including Medical, Dental and Vision Insurance, Matching 401k, Tuition Assistance, Paid Time Off, and much more. Azuria is an Equal Opportunity Employer. Equal opportunity is a sound and just concept to which Azuria is firmly bound. Azuria will not engage in discrimination against, or harassment of, any person employed or seeking employment with Azuria on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, non-disqualifying disability, status as a protected veteran or other characteristics protected by law. VEVRAA compliant - priority referral Protected Veterans requested.

Job DescriptionDescription: ob Purpose: The Welder Helper will assist the welders in various tasks related to metal fabrication and welding operations. The ideal candidate will support the welding team by preparing materials, maintaining equipment, and ensuring a safe and efficient work environment. Key Responsibilities: · Assist welders in setting up and operating welding equipment · Prepare materials for welding by cleaning, cutting, or grinding metal surfaces · Transport tools, materials, and equipment to and from work areas · Maintain cleanliness and organization of the worksite · Monitor welding operations to ensure safety and quality standards are met · Perform basic measurements and mark materials for cutting or welding · Help with post-welding tasks such as inspecting welds and cleaning finished products · Follow safety protocols and wear appropriate protective gear at all times Requirements: Required Skills/Abilities: · Understanding of welding processes, tools, and safety procedures · Ability to work with hand and power tools, and assist in equipment setups · Capable of lifting heavy materials, standing for extended periods, and working in various environmental conditions · Ability to follow instructions precisely and ensure quality in material preparation and cleanup · Familiarity with measuring tools such as tape measures, calipers, and squares · Knowledge of workplace safety standards and the ability to identify and avoid hazards · Ability to work effectively with welders and other crew members · Efficient in completing tasks within deadlines and maintaining productivity Education and Experience: · High School diploma or equivalent preferred · Previous experience in a construction or metalworking environment is a plus · Willingness to learn and grow within the welding trade Physical Requirements: · Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. · May involve working outdoors or in industrial environments · Exposure to heat, noise, and fumes · Use of protective equipment such as gloves, goggles, and welding masks · Must be able to bend at waist and knees and stand for extended periods of time. · Must be able to lift 25 pounds when necessary. · This is a safety sensitive position.

Job Description: Structural Welder The Welder Class B is responsible for welding material according to specifications of job orders. This position is deemed ‘safety sensitive' due to the fact that a person improperly performing the essential or marginal functions of the job would constitute a threat to the health or safety of the employee, the employee's co-workers, and/or the public at large. Pay: $23.00 - $ 25.00 Essential Duties and Responsibilities Receive and understand welding symbols and select proper welding material needed to finish for fitting, painting, and shipping. Locate pieces approved by Quality Control for welding. Gather equipment necessary to complete the job. Clean welded pieces for next phase of processing. Responsible for adhering to all company safety and QA/QC programs and OSHA regulations. The ability to work overtime and regular, punctual attendance is required. Perform non-essential functions as needed. Minimum Qualifications Minimum of two years' welding experience required. Must be able to read and comprehend welding symbols and instructions. Must be able to read and understand structural drawings. Must be able to pass a tape measure test. Must have ability to pass an unlimited thickness groove plate test in the vertical and overhead positions using FCAW and SMAW. Must be able to carbon arc gouge the back side of butt joints to sound metal. Safety & Environmental Factors: All employees are expected to adhere to the company's safety policies to maintain a safe and healthy work environment. This role involves working under extreme hot or cold conditions and requires the physical ability to stand for the entire shift, use hands for various tasks, ascend stairs, balance, stoop, kneel, crouch, talk, and hear. Team members must occasionally lift items weighing up to 50 lbs. Specific vision abilities required include close, distant, and peripheral vision, depth perception, and the ability to focus. BenefitsAs part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: Medical Coverage Dental Coverage Vision Coverage Short Term Disability Benefits Term Life Benefits * Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law. #ZR #TLRS

Job Description •3 years' of 1st class shipyard experience. Must also pass copper nickel test. Need to have copper nickel experience. •This is a 2-day test. 3