Welder jobs in Hammond, IN

JOB TITLE: WELDER / FABRICATOR REPORTS TO: Production Supervisor / Plant Manager DEPARTMENT: Welding BASIC FUNCTION: Perform, under minimum supervision, the function of lay-out, fabricating and mig welding. GENERAL JOB RESPONSIBILITIES: Interpret simple to difficult drawings, sketches and/or work from samples and instruction. Clean, cut and prepare various metals for welding. Set-up and perform mig welding on items for customer products. Safely operate various pieces of equipment such as the saw, cutting torch, presses (hydraulic drill and punch), brakes, etc. in order to produce various sub-assemblies. Responsible for producing acceptable work which meets or exceeds all Quality Control Standards. Requisition welding supplies in order to maintain an uninterrupted flow of welded product. Safely operate various forms of material handling equipment such as hoists, cranes, tow motors, etc. Maintain cleanliness and organization of work area. Exhibit interpersonal skills sufficient to perform as an active team member. Perform other duties as assigned or required by company management. JOB QUALIFICATIONS: Must have high school diploma or acceptable equivalent. Must be able to obtain welding certification within six months of hiring date. Ability to read and interpret blueprints. Able to safely handle various forms of material handling equipment such as hoists, cranes, etc. Requires attention and care to prevent injury to self and others when performing work. Ability to use various measuring tools. 1 - 3 years welding experience preferred. PHYSICAL REQUIREMENTS: Routine stooping and bending. Occasional heavy lifting - up to 50 lbs. Ability to stand 7+ hours per day. OTHER REQUIREMENTS: Must be able to read, write and understand the English language. Demonstrate a positive and business-like attitude. Required to wear all OSHA mandated safety equipment and to adhere to all company safety practices and policies. Conduct all interactions with customers (internal and external), vendors, field sales representatives, co-workers, and supervisors in a focused, positive, courteous and respectful manner. Regular attendance is an essential element of the job. Unplanned absences have the potential to impair the operation of the department and diminish effectiveness of the company. NOTE: This job description is not intended to be all-inclusive. It represents typical duties and criteria necessary to successfully fulfill the responsibilities of the position. Other duties may berequired at the discretion of supervision or management. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Title: A-Welder Reports to: Foreman Employment Status: Full Time Hourly (Non-Exempt) Pay Rate: Up to 52.45 (depending on qualifications and assessment) About us: Manhattan Mechanical Services provides highly skilled, merit shop craftsmen, ensuring the highest quality and safest mechanical services to light and heavy industrial facilities. Our merit shop philosophy ensures efficiency at every step of the project - from engineering/planning through startup. We are committed to a progressive career path for employees, complete with certifiable skills training. Manhattan Mechanical Services is a unique services provider that supports our customers in multiple areas: industrial maintenance services, process piping, structural steel, equipment installation, scaffolding and insulation. We specialize in providing turnkey projects to our customers. ***TO BECOME AN A OR B WELDER, CANDIDATES MUST PASS AN ASSESSMENT IN BOTH STICK AND TIG WELD*** Primary Function: The A-Welder will be certified in a combination of SMAW & GTAW welding and perform these processes in both shop and field environments. The A-Welder will be expected to work closely with their team and Manhattan Mechanical Services QA/QC Department to ensure all work is completed with the highest degree of quality. Manhattan Mechanical Services is a merit shop contractor supporting a team working environment. As such, all employees will be required from time to time to perform other duties that they are qualified to perform, outside of this job description and their normal work function. Work Environment: The normal work environment for this position will be in an industrial facility, which has been determined to be a safety sensitive environment. You will experience exposure to outdoor weather conditions and wear proper PPE is required for a variety of potential hazards. Every employee's performance could result in a significant incident affecting the health or safety of other employees, customers, customer's employees, the public, property or the environment. Roles & Responsibilities: The roles and responsibilities of an A-Welder may include, but are not limited to, the following: The A Welder is responsible for producing x-ray quality welds according to site standards and specifications. Safe use of hand and power tools. Responsible for identifying potential hazards and mitigating the hazards. Familiar with pipe cutting and beveling operations Read and understand WPS/WPQ documents. Must be willing to work as a team at all times to support the project. Fully participate in health, safety, quality and environmental processes. Experience: Three - Five years of experience in pipe welding, and able to pass SMAW & GTAW welding processes. Skills Required: Must have the following three certifications: Capable of performing X-ray quality welds on carbon steel with SMAW 6010 and 7018 electrodes in all positions including structural steel and pipe. Capable of performing X-ray quality welds on carbon steel and stainless steel with GTAW E70S2 or E70S6 electrodes in all positions including structural steel and pipe. Must be NCCER certified in related trade (knowledge verified and performance verified). Fabricating threaded pipe, socket weld pipe and butt weld pipe. Able to read and understand piping isometric drawings, weld maps, blueprints, and P&ID's. Able to install piping and piping components. Able to build and install various types of pipe hangers and supports. Able to cut and or bevel piping using oxyfuel, plasma, mechanical equipment. Knowledge of Rigging and Rigging operations Able to perform Hydrostatic Testing Education and requirements: Must be willing to attend continued training applicable to job as deemed necessary by Manhattan Mechanical Services. Must be able to pass an NCCER Assessment and be Performance Verified. Must be able to pass and receive TWIC card verification Physical: Must comply with Manhattan Mechanical Services 's drug and alcohol policy. Able to pass physical examination, pre-employment if necessary, as required by Manhattan Mechanical Services. Must be able to climb ladders and stairways. Must be able to carry 50 lbs. of tools and/or materials. Must be able to work at elevated heights as well as in confined spaces. (towers, vessels, excavations, etc.) Must be able to work extended hours on your feet on uneven surfaces. (dirt, concrete, asphalt, mud, gravel, etc.) Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required. Safety/Environmental: Must be able to pass applicable site-specific training. Must be able to read and understand safety instructions, signs, labels and permits in English. Manhattan Mechanical Services is an Equal Opportunity Employer, and relies on the diverse skills, backgrounds and perspectives of our people to drive change, innovation and growth. EOE/M/F/D/V Powered by JazzHR IksQyd0Wnj

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

As an S&C Electric team member, you'll work on projects that have real-world impact. You'll help transform the grid for resilient and reliable power worldwide. S&C has more than a 100-year history of innovation and has been 100% employee-owned since 2012. We continue this legacy as a trusted, forward-thinking leader in the electrical industry. You will advance a safer, more reliable, and more resilient electrical grid. Our products help the grid adapt to severe weather and transition to clean energy. We're big enough to be a respected industry leader but small enough for you to impact our company directly. Our commitment gives you opportunities to impact on and off the job positively. Join S&C to make an impact on tomorrow's energy challenges and become an employee-owner! Hours 4:00 pm- 2:30 am (Monday- Friday) Occasional OT on Saturdays 10-15 hours of overtime during the week as needed Compensation At S&C, we are dedicated to providing competitive and equitable compensation for all our team members, with a commitment to transparency in our pay practices. The estimated hourly base pay rate for this position is $28 per hour. This role is also eligible for S&C's annual short-term incentive bonus, subject to eligibility criteria. Join Our Team as a Welder! Are you passionate about Welding? S&C Electric Company is seeking a dynamic individual to coordinate our welding function. As a welder, you'll be crucial in ensuring smooth operations and supporting our diverse team. The Welder-Intermediate is responsible for performing various welding tasks to assemble metal structures and parts. The role involves using manual or semi-automatic welding equipment to fuse metal segments. This position requires adherence to safety protocols, precision in execution, and the ability to work collaboratively within a team environment to ensure the production of high-quality welded products. Key Responsibilities: Execute moderately complex welding operations to join, fabricate, and repair metal and other weldable material such as stainless steel. Set up and operate manual and semi-automatic (robotic) welding equipment including MIG and TIG welding, including turntable MIG. Read and interpret moderately complex blueprints, diagrams, specifications, and job orders to determine appropriate welding processes. Ensure welding is completed to the required standards and specifications. Inspect welded surfaces and structures to identify defects and ensure conformity with specifications. Deburr pieces to create appropriate welding services when necessary. Move materials, parts, equipment and other items using material handling equipment (ie. Lifts, hoists, hand trucks. etc) ensuring safety practices are diligently followed. Robotic Welders: Operate and program robotic welding equipment. Set up robotic welding systems for production runs. Monitor robotic welding operations and make necessary adjustments to ensure quality. Troubleshoot and resolve issues with robotic welding equipment. Maintain welding equipment in good working condition. Work collaboratively with team members and other departments to achieve production goals. Record and report production data accurately and timely. Participate in and identify continuous improvement initiatives to enhance welding processes. Meet department targets and consistently adhere to quality and safety standards. Understand and comply with all applicable Company policies and rules. Maintain regular and punctual attendance. Attend in-person or virtual meetings as requested or required. Communicate effectively and respectfully with others. Understand and comply with all applicable Company policies and rules. Other responsibilities as assigned. Required High School diploma. What you'll Need To Succeed: 3-4 years of demonstrated experience in a welding role in a manufacturing, automotive, or related environment. Sound understanding of welding techniques, metallurgy, and welding symbols. Knowledge of safety standards related to welding and metalworking. Ability to pass a welding skills test. Sound understanding of the properties and characteristics of metals used in welding. Understanding of welding equipment maintenance and troubleshooting. Robotic Welders: Understanding of robotic welding systems and programming. Knowledge of robotic welding setup and maintenance. Familiarity with robotic welding software and troubleshooting techniques. Ability to perform MIG, stick, and flux-cored arc welding techniques. Proficient in reading and interpreting moderately complex blueprints, drawings, and specifications. Good attention to detail to ensure precision in welding tasks. Excellent hand-eye coordination and manual dexterity. Ability to set up, operate, and maintain welding equipment and tools. Well-rounded problem-solving skills to identify and resolve welding-related issues. Effective communication skills to collaborate with team members and supervisors. Ability to work independently and as part of a team. Physical demands: Standing: Continuously required to stand and perform tasks Lifting & Carrying: Infrequently required to solo or team lift and/or carry items, exercising sound judgment to employ manual handling or machine lifts where required, and risk assessments, if appropriate Walking: Infrequently required to walk moderate distances Pushing: Occasional pushing of motorized material handling carts with loaded weights up to 1000 lbs. Low Posture: Infrequently required to perform tasks using a low posture, including but not limited to stooping, bending, crawling, crouching, kneeling, or squatting Position Self/ Move: Infrequently required to position self to perform tasks involving but not limited to reaching, twisting, rotating, and pushing/pulling Manual dexterity: Infrequently required to use hand-eye coordination to control both hands and arms for a full range of motion to operate equipment/machinery/power tools/office productivity equipment Ascending/ descending: Infrequently ascending or descending ladders/stairs/scaffolding/ramps/poles Observation/ Eyesight: Infrequently required to observe details at close range including depth perception, peripheral vision, and the ability to differentiate between colors S&C Electric is committed to equal-opportunity employment. All employees and applicants will be considered without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. If you are an individual with a disability and need an accommodation to complete the application, please email us at *******************. No fixed Deadline

Cadrex is searching for a Welder II to use Manual Welding skills to manufacture weldments to defined specifications, workmanship standards and production schedule. KEY RESPONSIBILITIES Prepare and set up necessary tools and equipment for welding jobs Arrange parts for welding and staging processes Perform quality inspection/checks per quality documentation/control plan (including documentation of results) Detect and report defective materials or questionable conditions to the Lead Maintain work area and equipment in a clean orderly condition and follows prescribed safety procedures Read and comprehend simple instructions, short correspondence, and memos. Write simple correspondence Uphold site efficiency standards Learn and demonstrate continuous improvement for Safety and Quality standards and procedures Perform other duties as requested by the Lead Assist in other work areas as assigned Understand welding symbols, print tolerances and quality measuring equipment Work completely independently without supervision Trouble shoot and resolve issues in assigned work center Produce quality work at company standard efficiency level for assigned work center Cross trained in multiple workstations Requirements PREFERRED QUALIFICATIONS 1+ years in a metal manufacturing setting preferred Pass AWS certifications for MIG welding steel and aluminum Possess a basic understanding of welding symbols, print tolerances and quality measuring equipment Meet or exceed company PPM level standards by consistently producing quality work Obtain and maintain weld certifications in two or more welding processes specific to employee's location Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Ability to read and interpret prints and work orders Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions EDUCATION High School Diploma LOCATION Onsite SCHEDULE M-F TOTAL COMPENSATION INCLUDES Health/dental/vision coverage Employer-paid and supplemental life insurance Short- and long-term disability insurance Generous paid time off and holiday pay Monthly remote work stipend (for remote employees who qualify) 401(k) investment plan, with an employer match of up to 4% Education support program Safety eyeglasses/shoe reimbursement Referral bonuses Bonus plan for all full-time employees WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and vibration. The employee is occasionally exposed to the risk of electrical shock. The noise level in the work environment is usually moderate and occasionally loud. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, sit, use hands and fingers, handle or feel, and talk or hear. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception and ability to adjust focus. CADREX'S CORE VALUES Safety first, rising to the challenge, collaboration, accountability, and doing the right thing ABOUT US CADREX Manufacturing Solutions is a leading provider of complex sheet metal and machined production parts, assemblies, and weldments for a variety of end markets, including electrical transmission and distribution, warehouse automation, technology, aerospace & defense, medical, food, and industrials. With locations in Colorado, Pennsylvania, Illinois, Washington, Wisconsin, Minnesota, Michigan, Indiana, Massachusetts, Oklahoma, and Monterrey Mexico, CADREX offers numerous in-house manufacturing capabilities, including laser cutting, sheet metal fabrication, complex assembly, CNC punching, CNC machining, forming, robotic welding, stamping, fastener insertion, and tool and die manufacturing, to effectively serve customers with lights-out manufacturing capabilities for mid- to high-volume production. For more information, visit *************** Cadrex provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Description $25.00-$32.00 per hour

Job Description Welder/Fabricator Are you a Welder who is looking for a good work culture and a company that cares for your well-being? SMS is the place for you. What we do: SMS group is an industrial equipment manufacturer for the steel industry. We design, build, and service equipment and sleep plants across the globe with a strong technical services/machine shop network in North America. Summary The right candidate will: · Perform welding operations such as arc, MIG, TIG brazing and burning in all positions on a variety of metals. · Operate drill press to make parts for fabrication. · Record measurements, record pertinent information as required. · Weld per SMAW, GMAW, GTAW standards; vertical up, vertical down, and horizontal · Plasma arc cutting · Air carbon arc cutting · Pipe bending, fitting, welding, and threading · Use horizontal and vertical saws, torch, and cut off wheel · Set up and operate all welding machines, be able to do basic troubleshooting · Set up and operate all machines in the fabrication area, be able to do basic troubleshooting What you'll need: · Must have GED or High school Diplomas · Basic knowledge of mechanical applications · Follow instructions and established procedures. · Read and interpret prints, including welding prints What we offer: · Competitive compensation · Medical/Dental/Vision coverage starting after 30 days · Paid vacation · 10 paid holidays · 401K with a company match · Paid lunches · Paid uniforms, internal metatarsal boots and all other PPE · Training · Tuition reimbursement program and more! Who we are: At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test. **************** LinkedIn

Job DescriptionSalary: $25-$40 per hour, based on skills and experience Dubak Electrical Group is growing and we are looking to add an experienced Pipefitter/Welder to our team in La Grange Park, Illinois. This individual will perform skilled work in welding and cutting using MIG, TIG & Aluminum welding equipment. Perform electric arc and acetylene welding on equipment, including pipe, tanks, machine parts, metal structures, fixtures, and fittings under direct supervision of the HVACR Senior Project Manager and designated supervision. Work environment will be in the field. The ideal candidate will have worked in an industrial environment and have experience with the primary job duties listed in this description. Primary Job Duties and Requirements will include, but not limited to: Prepare objects for welding by preheating, cleaning, and filing, positioning, aligning, and clamping or wiring loose parts. Evaluate, design, repair and/or fabricate machine work as required. Read and interpret blueprints, diagrams, sketches, and job specifications. Maintain, clean, and perform minor repairs on welding equipment. Assemble, maintain, install, and/or repair piping systems and components. Perform prime coat painting as necessary Other related duties as required. Proficiently use standard machine ship equipment such as lathe, milling machine, drill press, band sawn, and other machinist related hand tools. Follow all safety procedures Always wear all required PPE Travel to national projects may be required Must have a valid drivers license and a reliable vehicle Experience & Education: Technical school, 4 yr. apprenticeship and/or equivalent experience. 2+ years experience as a Pipefitter/Welder at journey level. 2+ years experience in a field environment Technical proficiency on standard machine shop equipment such as lathe, milling machine, drill press, band saw and any machinist related hand tools. Sufficient strength and physical dexterity to perform duties and responsibilities of this job, including heavy lifting. Must be able to wear/use all personal protective equipment required to perform job safely. Benefits: Competitive Salary Comprehensive Benefits, including Medical, Dental, Vision, Life, Short-Term Disability, Long- Term Disability, among other voluntary options Paid Time Off 401(k) and Profit Sharing (6) Paid Holidays Training Reimbursement Program Positive Work/Life Balance Opportunities for Advancement Dubak Electrical Group, LLC and its affiliates is an Equal Opportunity Employer that is committed to a diverse and inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, national origin, ancestry, gender, gender identity, marital status, status with regard to public assistance, citizenship status, physical or mental disability, sexual orientation, membership or activity in a local commission, veteran status, age, or any other status protected by law.

After School Matters is seeking committed, part-time instructors to teach Welding programs for 12-30 high school participants (12:1, instructor: teen ratio) between the ages of 14 to 20 for 2025-2026. The program will allow students to learn and engage in activities specific to the content area. An instructor will expose teens to a wide range of activities and concepts to meet measurable program outcomes. The instructor will recruit, teach, and mentor teens and manage operational pieces such as program planning and budget creation. This part-time position is scheduled for approximately 20-30 hours per week per program session. Instructors must have a program curriculum plan. See ASM Program Planner Major Duties and Responsibilities: Guide a 6-10 week session for teens offering an introduction to welding in a fabrication setting Instructors will be responsible for educating a diverse population of teenagers methods of GMAW, SMAW and GTAW, with a strong coinciding element of welding sciences and associated skills The instructor will develop, plan and implement high quality content related field trips, master classes, events and guest visits to enhance instruction and training. Instructors will be expected to participate in the recruitment, interview and selection process of teen program participants. Instructors will also be expected to participate in planning and program dates such as instructor orientation, professional development workshops, meetings and other required sessions. Supervise teens at an average of 12:1, instructor: teen ratio Knowledge, Skills and Abilities: Comprehensive knowledge of safety guidelines in a weld shop A thorough understanding of combination welding processes and associated prep/finishing skills Knowledge of aluminum, steel and stainless welding processes An understanding of the science of welding Ability to read and understand technical drawings or blueprints Familiarity with schools and career pathways in welding industries and an interest in working with teens Qualifications: Associates Degree in a related vocational program, Applied Science in Welding Technology, or Applied Industrial Technology preferred, equivalent professional experience accepted. Certifications also accepted in lieu of a university degree. Experience working in a field relevant to the content area is required. Familiarity with specific Chicago neighborhoods is required. Experience teaching, specifically teenagers, is highly preferred. Commitment to diversity and inclusion is required. Program Sessions and Schedules: The typical schedule for program sessions are as follows: Summer: 6 to 7 weeks, daily Monday through Thursday/Friday (based on the program model), four instructional hours daily in the afternoon. Additional hours are allotted for planning, recruitment, professional development and meetings. Exact program meeting days/times are flexible, with some restrictions, so long as instructional hours are met. Summer programs begin in late June 2025 Fall: 10 weeks, Monday through Friday (after school hours) and/or Saturday, 60-90 instructional hours (based upon the program model). Additional hours are allotted for planning, recruitment, professional development, and meetings. Exact program meeting days/times are flexible, with some restrictions, so long as instructional hours are met. Fall programs begin in late September 2025 Spring: 10 weeks, Monday through Friday (after school hours) and/or Saturday, 60-90 instructional hours (based upon the program model). Additional hours are allotted for planning, recruitment, professional development and meetings. Exact program meeting days/times are flexible, with some restrictions, so long as instructional hours are met. Spring programs begin in late February 2026 Daytime during School Year (Fall & Spring): 9am-2pm. Exact program days are flexible, with some restrictions, so long as instructional hours are met. Limited opportunities for Saturday only programs are available. After School Matters has four program branches: North/Northwest, South/Southwest, Downtown, and Program Supports (special initiatives). Please note that Interstate-55 is an approximate dividing line between our North/Northwest and South/Southwest branches. This role is for the North/Northwest Branch at the 3435 N. Cicero Ave location. Compensation: The pay rate is typically between $21-35 per hour based on experience and education. About Us: After School Matters is a Chicago-based nonprofit organization that annually offers after-school and summer programs to nearly 19,000 Chicago high school teens to explore and develop their talents while gaining critical skills that will set them up for success in college and beyond. Thirty-five years later, now known as After School Matters, our program has engaged more than 450,000 Chicago teens and is the nation's largest and most successful provider of after-school and summer programs for high school teens. No other organization offers programs to high school students at the scale and quality that we do. We offer paid apprenticeships led by professionals in the fields of arts, communications and leadership, sports, and STEM (Science, Technology, Engineering, and Math). Our nationally respected youth development model has been replicated in cities across the country and earned us the City Livability Award from the U.S. Conference of Mayors. Programs take place at community locations throughout the city, including three ASM buildings: downtown at Gallery 37 Center for the Arts, the Michael and Karyn Lutz Center in Belmont Cragin, and the Pullman community at Gately Park. Currently, After School Matters' annual operating budget is approximately $35M and employs approximately 500 staff across the organization. For more information, visit *************************** EEO: After School Matters is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, national origin, religion, sex, sexual orientation, gender identity, disability, protected veteran status, military discharge status, age, marital status, parental status, or source of income. Powered by JazzHR UJVNbN4oC9

About Folding Guard: Folding Guard is a leading manufacturer and provider of innovative security and safety solutions for a wide range of industries. With a history spanning over 50 years, we are committed to delivering high-quality products that protect people, property, and assets. Our dedication to excellence and our customer-centric approach have made us an industry leader in security enclosures, wire mesh partitions, and other customizable security solutions. Position Summary: Folding Guard is seeking a skilled Welder to join our dynamic team. The Welder will play a crucial role in fabricating and assembling our safety and security products, ensuring they meet the highest quality standards. The ideal candidate should have experience in various welding techniques and a strong commitment to safety and precision. Key Responsibilities: Perform welding tasks using various techniques such as MIG and ARC welding to join metals according to specifications. Read and interpret engineering drawings, blueprints, and welding symbols to accurately produce components. Ensure all welds meet quality and safety standards and make necessary adjustments as needed. Prepare workpieces by cleaning, cutting, and shaping materials as required for the welding process. Set up welding equipment, including selecting appropriate tools and adjusting settings for optimal performance. Inspect finished welds to verify they meet established quality standards and specifications. Address any defects or inconsistencies in the welding process promptly and report them to the supervisor. Adhere to all safety protocols, including the use of personal protective equipment (PPE) and following established procedures. Ensure compliance with company policies, industry regulations, and relevant codes and standards. Work closely with other members of the production team to ensure seamless workflow and efficient production processes. Provide support to other departments as needed to meet production goals and deadlines. Qualifications: Proven experience as a Welder, with a strong portfolio of completed welding projects. Proficiency in MIG, and ARC welding techniques. Familiarity with various metals and alloys. Ability to read and interpret engineering drawings and blueprints. Strong attention to detail and a commitment to producing high-quality work. Excellent problem-solving skills and the ability to work independently. Knowledge of safety protocols and a commitment to a safe working environment. Welding certification (preferred). Physical Requirements: Ability to lift heavy materials and work in various positions, including standing, kneeling, and bending for extended periods. Benefits: Competitive salary Opportunities for professional growth and advancement Positive and collaborative work environment Employee recognition and development programs Comprehensive benefits package including: Medical: Access to our medical insurance plan, which provides coverage for medical expenses and prescriptions. Dental: Enrollment in our dental insurance plan, helping you maintain your oral health. Vision: Participation in our vision insurance plan for regular eye exams and eyewear. 401(k) Retirement Plan: Eligibility to enroll in our 401(k) plan, with a company match of the first 6% of your contributions at a 40% match. This is an excellent opportunity for you to save for your retirement with added support from the company. Vacation: will accrue 10 vacation days Additional Information: We are looking for candidates for both first and second shifts. Folding Guard is an equal opportunity employer. We are committed to providing a workplace that is free from discrimination and harassment based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable law. Employment decisions are based on qualifications, merit, and business needs. Visa Sponsorship Disclaimer: Folding Guard regrets that, at this time, we are unable to sponsor work visas or provide immigration assistance for employment. All candidates must be legally authorized to work in the United States of America without requiring sponsorship. We appreciate your understanding in this matter.

I. BASIC FUNCTION The Welder is responsible for performing all aspects of welding on inland marine vessels and equipment, including maintenance, fabrication, and structural repairs. This position plays a critical role in ensuring the structural integrity and operational readiness of barges and boats while maintaining a strong focus on safety, quality, and compliance. By executing high-quality repairs and fabrications, the Welder supports vessel reliability, minimizes downtime, and contributes directly to the safety, efficiency, and longevity of marine operations. II. MAJOR RESPONSIBILITIES 1. Performing all aspects of welding work including prepare/check equipment. 2. Welding steel barges and ships. 3. Stick welding - 6010, 7018 and 7024. 4. Flux core welding in all positions using 0.52 wire. 5. Safely operate heavy equipment and follow all safety policies and procedures. 6. Staying compliant with all regulatory bodies as it applies to the work that is being completed and with all safety rules and policies. 7. This position may involve travel to multiple locations. Other 1. Perform other duties as required and directed by management. 2. Carry out the Business Philosophy, Code of Conduct, Mission and Vision of Illinois Marine Towing and Canal Barge Company. III. TRAITS AND ATTRIBUTES A. Communication Skills: Effectively communicates with team members, supervisors, and support staff to ensure project clarity, task coordination, and safety. Demonstrates active listening and the ability to give and receive constructive feedback. B. Attention to Detail: Executes welds and repairs with precision, ensuring structural integrity and adherence to specifications and codes. C. Safety Oriented: Proactively follows all safety procedures and helps foster a culture of safety in all work environments. IV. ORGANIZATIONAL RELATIONSHIP The Welder is appointed by and reports to the Shipyard Services Manager. V. EXPERIENCE/EDUCATION 1. High School Diploma or equivalent is required. 2. Hold a valid Driver's License. 3. Minimum 2 years of experience in stick welding. 4. ABS certification is preferred but not required. 5. Strong understanding and application of workplace safety practices. 6. Have strong written, verbal, and interpersonal skills. 7. Possess a Transportation Worker Identification Credential (TWIC). VI. PHYSICAL REQUIREMENTS 1. Ability to climb ladders and stairs. 2. Repetitive bending and stooping, squatting, and kneeling. 3. Lifting heavy marine equipment and lifting objects from various levels up to 75 pounds. 4. Ability to work outdoors in weather such as rain, snow, and extremely hot and cold temperatures. 5. Since the use of a respirator mask is required, welders must be clean shaven at all times to ensure an effective face seal. VII. OUTCOMES The Welder is expected to produce high-quality, structurally sound welds that meet safety and regulatory standards critical to the integrity of marine vessels and equipment. Work must be completed efficiently, with minimal rework or delays, while maintaining a strong focus on safety and compliance. The welder should demonstrate reliability, adaptability to changing priorities, and a commitment to supporting team goals. Consistent adherence to safety protocols, timely completion of assigned tasks, and professional conduct across all job sites are key measures of success in this role. EEO/AA/M/F/Vet/Disability Employer Illinois Marine Towing is a federally regulated company. Any applicant tentatively selected for this position will be subject to pre-employment drug and alcohol screening. Persons occupying this role will be subject to random drug and/or alcohol testing. Canal Barge Company and its subsidiaries are Equal Opportunity Employers - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information.

Job Title: TIG Welder Pay Rate: $24.00 - $26.00/hour Schedule: Monday - Friday: 6:00 A.M. - 2:30 P.M. (Overtime often until 4:30 P.M.) Saturday: 6:00 A.M. - 12:00 P.M. (Mandatory if needed, depending on workload) Position Overview We are seeking experienced TIG Welders to join our team and contribute to the fabrication and manufacturing of high-quality metal parts. The ideal candidate will be able to step in with minimal training, follow blueprints with precision, and produce strong, clean welds that meet exact specifications. Key Responsibilities Fabricate and manufacture metal parts in accordance with blueprints and specifications. Follow blueprints and welding symbols to ensure accuracy and quality. Perform TIG welding and operate metal fabrication tools. Produce strong, clean welds that meet quality and tolerance standards. Grind, finish, and inspect completed welds for strength and accuracy. Test welded output to ensure it meets required specifications. Maintain a safe and organized work area. Follow all safety policies and procedures. Requirements & Qualifications Proven TIG welding experience (2+ years preferred), ideally in a manufacturing environment. Strong blueprint reading skills and knowledge of welding symbols-must be able to work independently without additional training. Proficiency in TIG welding, grinding, finishing metals, and general metal fabrication. Ability to stand, crouch, and lift heavy equipment as needed. Detail-oriented with a commitment to quality workmanship. Must pass a weld test, drug test, and background check prior to hire. Benefits Competitive hourly pay based on experience. Full-time hours with overtime opportunities. Opportunity to work with a skilled, professional team. Pre-Employment Screening: Drug screen and background check required. Chase Technical Staffing is an Equal Opportunity / Affirmative Action employer: All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, disability, sex, age, ethnic or national origin, marital status, sexual orientation, gender identity or presentation, pregnancy, genetics, veteran status or any other status protected by state or federal law

MIG Welder/ Fabricator Full time - M-F Overtime available The National Joist Company is hiring full time experienced MIG welders. Come and join a dedicated team at a growing company! Job Description: At The National Joist Company we fabricate steel joist and deck building systems. We are looking for individuals who are passionate in their line of work and are dedicated to helping bring our visions to life. Qualifications: Minimum 2yrs experience in MIG Welding Self- motivated and detail- oriented Material handling with sit-down forklifts & overhead cranes Be familiar with the steel industry Be proficient at MIG/TIG welding working in thickness Must have fabrication skills Ability to read a tape measure Ability to read and understand blueprints, work orders and instructions Certified welder is a plus

Join an award-winning workplace of energetic, talented people, and be on one of the best work teams in the Chicagoland area! We are devoted to having a workplace that supports each of our team members in making high quality products and working together to be the best at what we do. We are a sheet metal fabrication and machining company specializing in stainless steel, servicing the Midwest. Our customers are Original Equipment Manufacturers (OEM's) that are primarily in the food processing, food packaging, environmental, and pharmaceutical industries. We pride ourselves on our customer responsiveness which has made us successful for a number of years. Check us out at ***************** Benefits Offered Include: Medical Dental Vision Short and Long Term Disability Paid Time Off 9 Annual Paid Holidays 401k Retirement Plan Weekly Pay Period Welder Ensure ACE delivers quality welded parts to meet customer expectations. Welding Responsibilities: Develop a work plan that includes the sequence for the overall fabrication and finishing processes, as well as the approach, process and sub-assemblies for completing the work and meeting customer requirements. Responsible for reading blueprints and demonstrating an understanding of geometric tolerances, welding symbols and quality of the required weld using MIG or TIG standards. Responsible for the overall quality of the welding work including distortion and dimensional control and taking corrective actions. Collaborate with engineering as needed to complete the job. Responsible for verifying that the work meets the required quality standards. Participate in visual work instructions development activities as needed. Coordinate with Grinding & Polishing to maintain paperwork and required QC tracking, including routing, documenting critical inspection features, work completed, etc. Responsible for material handling that reflect common manufacturing processes and takes precautions to protect material and finish. Perform daily and ongoing preventative maintenance on welding tools and equipment as required. Maintain calibrated equipment used to verify quality to standards. Participate in QC/continuous improvement processes to increase performance and product quality. Projects as assigned. Safety Responsibilities: Always wear personal protective equipment when in the plant Participate in all required safety training and perform as trained Speak up when you see something happening that is not safe Fully trained in crane and fork lift safety Qualifications: Blueprint reading with comprehension of part 5 years experience with stainless steel MIG and or TIG welding Fabrication knowledge Make sub-assemblies Sequence the weld assembly How to restrain part for welding Develop procedures for welding Knowledge of distortion control and straightening Know how to measure and handle measuring equipment Material handling and crane operation Ability to lift 50 lbs This is a Safety Sensitive Position.

Job Details CHICAGO, IL $20.00 - $22.00 HourlyDescription Position Overview: We are looking for skilled TIG Welders to cut and join metals and other materials at our manufacturing facility. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is essential as it provides the foundation for a strong infrastructure. A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is essential. We offer a competitive salary based on experience. Job Description Preferred Skills Experience welding to ASME Section 9 standard Familiarity welding open root schedule 40 pipe Familiarity with MIG welding is a plus Ability to select equipment, plan layout, assemble and weld Ability to apply knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding technique Must be able to lift and move up to 20-50 lbs. Must be able to maintain a safe and clean work environment Must be able to effectively work off drawings/templates/specifications Must be able to accurately verify quality and quantity of piping products Must be able to position, align, and fit components together Qualifications Professional welding training - preferred High school diploma - minimum Basic reading and writing skills High motivation Strong attention to detail Benefits Competitive Salary based on experience Entry Range: $20.00-$22.00 Medical, Dental, Vision, Short-term disability, Paid time off, AFLAC 401k with company match Website: *****************

FLSA Status: Non-Exempt Reports To: Production Supervisor Location: North Aurora, IL Job Summary: The Welder is responsible for performing skilled welding work in the fabrication, maintenance, and repair of metal structures and equipment. This role involves interpreting blueprints, using welding equipment, and ensuring the quality and safety of welded products. Key Responsibilities: Welding & Fabrication: Perform welding tasks using various welding techniques such as MIG, TIG, and arc welding. Fabricate and repair metal structures, equipment, and parts according to specifications. Interpret blueprints, diagrams, and work orders to determine welding requirements. Quality Control: Inspect completed welds to ensure they meet quality standards and specifications. Perform necessary adjustments and repairs to achieve desired results. Maintain accurate records of work performed and materials used. Safety & Maintenance: Follow all safety protocols and procedures to ensure a safe working environment. Maintain and clean welding equipment and tools. Report any equipment malfunctions or safety hazards to the supervisor. Collaboration & Communication: Work closely with other team members to complete projects on time. Communicate effectively with supervisors and colleagues regarding project status and any issues. Participate in team meetings and training sessions as required. Qualifications: High school diploma or equivalent. Certification in welding or completion of a welding training program. Minimum of 2 years of welding experience. Proficiency in various welding techniques and equipment. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and commitment to quality. Good communication and teamwork skills. EEO Statement: the company is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description FLSA Status: Non-Exempt Reports To: Production Supervisor The Welder is responsible for performing skilled welding work in the fabrication, maintenance, and repair of metal structures and equipment. This role involves interpreting blueprints, using welding equipment, and ensuring the quality and safety of welded products. Key Responsibilities: Welding & Fabrication: Perform welding tasks using various welding techniques such as MIG, TIG, and arc welding. Fabricate and repair metal structures, equipment, and parts according to specifications. Interpret blueprints, diagrams, and work orders to determine welding requirements. Quality Control: Inspect completed welds to ensure they meet quality standards and specifications. Perform necessary adjustments and repairs to achieve desired results. Maintain accurate records of work performed and materials used. Safety & Maintenance: Follow all safety protocols and procedures to ensure a safe working environment. Maintain and clean welding equipment and tools. Report any equipment malfunctions or safety hazards to the supervisor. Collaboration & Communication: Work closely with other team members to complete projects on time. Communicate effectively with supervisors and colleagues regarding project status and any issues. Participate in team meetings and training sessions as required. Qualifications: High school diploma or equivalent. Certification in welding or completion of a welding training program. Minimum of 2 years of welding experience. Proficiency in various welding techniques and equipment. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and commitment to quality. Good communication and teamwork skills. EEO Statement: the company is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Chief Buildings is seeking a Fitter Welder to join the Chief team. In this role, you will be responsible for performing GMAW tack welding, torch cutting, and layout operations to assemble steel components for final welding. You will also carry out GMAW welding processes on production materials in accordance with the required specifications. This position plays a key role in ensuring structural accuracy and weld quality throughout the fabrication process. To be successful in this position, you should be detail-oriented, skilled in blueprint reading, and committed to working safely in a fast-paced manufacturing environment. Job Responsibilities: Ensure compliance with quality control standards and maintain required AWS certifications, consistently meeting or exceeding the 85% UT pass ratio. Assemble steel frames through precise layout, tack welding, and final welding, including lifting and positioning heavy components safely. Operate assigned equipment with a thorough understanding of its capabilities and relevant welding codes; perform machine setup and routine maintenance as needed. Accurately complete all job-related documentation and data entry; manage tasks independently with minimal supervision. Work effectively in elevated temperatures while wearing layered personal protective equipment (PPE). Education: High School Diploma, or GED, preferred. Qualifications and Skill Requirements: Solid understanding of welding techniques and metal fabrication processes. Proficient in using hand tools including tape measures, squares, protractors, oxy-acetylene torches, plasma cutters, and grinding equipment. Capable of reading and interpreting fabrication drawings and data sheets for precise assembly. Strong mathematical skills, with the ability to work confidently with fractions and decimals. Shift: 2nd Shift 4:30pm-3:00am The Company: Putting the needs of customers first has taken Chief Industries, Inc. from a small construction company in 1954, to a highly diverse company with a reputation for manufacturing quality products and offering unparalleled customer service. Through its many divisions and subsidiaries, Chief Industries employs over 1,400 skilled and dedicated employees who produce a wide variety of products, many of which are used around the world. A brand of Chief Industries, Chief Buildings has designed and manufactured a wide variety of construction solutions for customers located throughout the United State since 1966. Specific applications include manufacturing, commercial, community and agricultural buildings. Each structure is designed to meet the needs of the customer. Chief Buildings are sold by authorized builders throughout the United States, and are manufactured in Grand Island, Nebraska, Lancaster, South Carolina, and Rensselaer, Indiana. Our Benefits: This full-time position is eligible for full company benefits, including Paid vacation/time off 401(k) retirement plan plus company match Company-paid life insurance Company-paid short-term disability benefits Health Insurance Dental Insurance Vision Insurance Financial wellness coaching Employee assistance program Paid holidays (8) Employee discounts Education assistance And much more. **Chief Industries Inc. is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the basis of equal employment opportunity for all and to providing employees and applicants with a work atmosphere free of discrimination and harassment. All employment decisions are based on professional demand, job requirements and qualifications, without regard to color, race, family status, religion or belief, or any other status protected by the laws or regulations in the settings in which work is being completed. Chief Industries Inc. will not tolerate any discrimination or harassment based on any of these characteristics. Chief Industries Inc. encourages all to apply for any available jobs. If you need additional assistance with the application process, please call ************.**

This is the perfect Welder job! It won't last long, Apply NOW! Welder role with a great starting pay of $18-$19/hr. 1st shift hours with a 5:00AM start with lots of OT! Welder Job Description: Read blueprints and drawings and take or read measurements to plan layout and procedures. Determine the appropriate welding equipment or method based on requirements. Set up components for welding according to specifications. Operate grinders to prepare the parts that must be welded. Align components using calipers, rulers etc. and clamp pieces. Weld components using manual or semi-automatic welding equipment in various positions. Repair machinery and other components by welding pieces and filling gaps. Test and inspect welded surfaces and structure to discover flaws. Maintain equipment in a condition that does not compromise safety. May be temporarily assigned to other areas as workload demands. Other duties as assigned by supervisor. Not the job for you? Who do you know? We love referrals, and your friends will love you too! #ZR#335046

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions. Heat oxygen/propane heating torch. Perform grinding and pick up work as needed. Complete air carbon arc gouging. Properly use fillet and butt gauges. Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material. Requirements Minimum 8 years of naval/commercial welding experience. Successfully pass several tests over a three-week period. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability