Welder jobs in Idaho - 31 jobs

The J.R. Simplot Company is a diverse, privately held global food and agriculture company headquartered in Boise, Idaho. We are a true farm-to-table company with an integrated portfolio including food processing and food brands, phosphate mining, fertilizer manufacturing, farming, ranching and cattle production, and other enterprises related to agriculture. **Summary** The Maintenance Mechanic/Welder works independently and with other maintenance personnel to perform preventative, predictive and routine maintenance tasks and welding tasks. This role includes troubleshooting issues, repairing failures of production and mobile equipment, and ensuring maximum equipment efficiency and effectiveness. This person provides direction for effective execution of maintenance activity on all machinery and equipment throughout the mine. The Maintenance Welder/Mechanic is also responsible for the optimum utilization of available resources such as manpower, equipment, time, etc. This person must be responsible for decisions, actions and failures; must establish clear responsibilities and processes for monitoring work and measuring results. In addition, the maintenance welder/ mechanic must partner with others to get work done and work cooperatively with others across the organization to achieve shared objectives. **Key Responsibilities** + Perform minor and major welding repairs on mobile equipment. perform line boring tasks, fabricate materials and components for special projects. **Typical Education** + High School Diploma of General Education Degree (GED) **Relevant Experience** + 3+ years related experience and/or training **Other Information** + Experience with welding and cutting equipment, hydraulics, pneumatics, and mechanics + Ability to read and interpret documents and drawings and write detailed repair reports + Ability to analyze and make decisions + Ability to diagram equipment control problems + Strong verbal and written English communication skills + Good organizational and planning skills. + Preferred: Experience with Climax line boring equipment. + Must be able to perform each essential duty satisfactory, and represent the knowledge, skill and/or ability required. + Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. + **Physical Requirements** : + Lift and move heavy equipment + Climb ladders and work in high, precarious places. + **Working Environment** : + May be exposed to wet or humid conditions + May be exposed to outdoor weather conditions + May be exposed to high noise environments + May be exposed to chemicals used in the process + Could be in temperatures of -30 degrees. **Job Requisition ID** : 24649 **Travel Required** : None **Location(s)** : ABW Smoky Canyon Mine - Afton **Country:** United States ****The J.R. Simplot Company is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, religion, national origin, ancestry, age, sex, gender, gender identity, gender expression, genetic information, physical or mental disability, medical condition, sexual orientation, military or veteran status, marital status, or any other protected status. ****

Weir ESCO Elko, NV Onsite Purpose of Role: The Welder will be responsible for heavy fabrication and repair work, specifically on large mining buckets and related industrial equipment. They should have a strong background in welding thick materials, structural components, and wear parts, with a focus on safety, precision, and durability. Why choose Weir: Be part of a global organization dedicated to building a better future: At Weir, the growing world depends on us. It depends on us constantly reinventing, quickly adapting and continually finding better, faster, more sustainable ways to access the resources it needs to thrive. And it depends on each of us doing the best work of our lives. It's a big challenge - but it is exciting. An opportunity to grow your own way: Everything moves fast in the dynamic world of Weir. This creates opportunities for us to take on new challenges, explore new areas, learn, progress and excel. Best of all, there is no set path that our people must take. Instead, everyone is given the support and freedom to tailor-make their own career and do the best work of their lives. Feel empowered to be yourself and belong: Weir is a welcoming, inclusive place, where each individual's contribution is recognized and all employees are encouraged to innovate, collaborate and be themselves. We continually focus on people and their wellbeing. We believe in fairness and choose to be honest, transparent and authentic in everything we do. Key Responsibilities: MIG Welding: Perform MIG welding on large scale mining buckets and heavy equipment components. Conduct structural repairs, rebuilds, and modifications using appropriate welding techniques Blueprint Reading: Read and interpret blueprints, technical drawings, and welding symbols Mechanical Aptitude: Operate heavy-duty fabrication tools including grinders, torches, and plasma cutters. Quality Inspection: Inspect welds for quality and compliance with specifications as determined by blueprints Safety First: Demonstrate 100% commitment to our zero harm behaviors in support of our drive towards developing a world class safety culture. Job Knowledge/Education and Qualifications: Ability to use and run an air arc Must pass a welding test to be considered for hire Founded in 1871, Weir is a world leading engineering business with a purpose to make mining operations smarter, more efficient and sustainable. Thanks to Weir's technology, our customers can produce essential metals and minerals using less energy, water and waste at lower cost. With the increasing need for metals and minerals for climate change solutions, Weir colleagues are playing their part in powering a low carbon future. We are a global family of 11,000 uniquely talented people in over 60 counties, inspiring each other to do the best work of our lives. For additional information about what it is like to work at Weir, please visit our Career Page and LinkedIn Life Page. Weir is committed to an inclusive and diverse workplace. We are an equal opportunity employer and do not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, veteran status, disability, age, or any other legally protected status. #ESCO #LI-SK1

Benefits: 401(k) Dental insurance Health insurance Paid time off We are seeking a skilled Fabricator/Welder to join our team at TRC Fabrication. The ideal candidate will have experience in welding and fabrication, and knowledge working with various materials to create structures and components. Duties - Interpret and work from blueprints, drawings, and specifications - Perform welding tasks using appropriate welding techniques - Utilize power tools and equipment for fabrication work - Work with sheet metal, and other materials as needed - Adhere to welding codes and standards - Read and understand schematics for fabrication projects Experience One year of experience is preferred. Pay DOE. Required Skills: - Proficiency welding techniques - Familiarity with power tools used in fabrication work - Ability to work with sheet metal - Work well alone and with others on a team -Strong attention to detail -Physical stamina and strength to handle the demands of the job Nice-to-Have Skills: - Knowledge of welding codes and standards - Forklift operation experience - Welding Certifications (preferred but not required) If you are a dedicated Fabricator/Welder with a passion for precision and quality workmanship, we invite you to apply for this exciting opportunity. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Life insurance Vision insurance Paid Time Off Shift: 10 hour shift Day shift Evening shift Experience: Welding: 1 year (Required) Compensation: $19.95 - $24.00 per hour SEAA is a not-for-profit organization dedicated to the advancement of steel industry professionals. SEAA assists our members in their employee recruitment, hiring and training processes and we provide on-going safety and training support in effort to nurture success.

Job DescriptionDescription: The Welder is responsible for performing high-quality welds and fabrications used in the manufacturing of trailers, including frames, axles, ramps, structural supports, and custom components. This role ensures all welds meet company specifications, safety standards, and DOT compliance requirements. The Welder contributes to meeting production timelines while maintaining a clean, safe, and efficient work environment. Requirements:Safety Expectations Wear required PPE at all times, including welding hood, flame-resistant clothing, gloves, steel-toe boots, and hearing/eye protection (OSHA 1910.132-138). Ensure proper ventilation while welding to avoid exposure to fumes (OSHA 1910.252). Keep work area free of flammables; use fire-retardant screens where needed. Inspect welding machines, leads, torches, and gas cylinders at the start of each shift. Ensure compressed gas cylinders are properly labeled, capped, and secured (OSHA 1910.253). Report damaged equipment immediately and tag out if unsafe. Follow lockout/tagout procedures when working on powered equipment (OSHA 1910.147). Maintain awareness around overhead cranes, forklifts, and moving assemblies. Use proper lifting techniques when handling trailer frames and heavy components. Know the location of fire extinguishers and hot-work permits. Maintain a fire watch after completing welds near combustible materials. Immediately remove slag, spent rods, and scrap metal from walkways. Participate in safety meetings, toolbox talks, and required training. Report all near-misses, hazards, and injuries immediately. Maintain clean and organized workstations to prevent trips, falls, and equipment damage. Responsibilities Perform MIG welding (and TIG if required) on steel components for trailer frames and assemblies. Read and interpret blueprints, shop drawings, and measurement specifications. Fabricate parts, components, and assemblies with accuracy and minimal rework. Fit, tack, and weld components together following manufacturing processes. Inspect welds for accuracy, structural integrity, and compliance with specifications. Operate grinders, torches, plasma cutters, drills, and other fabrication tools. Ensure all work meets quality standards and passes internal inspections. Maintain production deadlines and communicate delays to the supervisor. Report any design or specification issues to management for correction. Work closely with team members to assemble full trailer units. Maintain welding equipment, leads, gas cylinders, and tools in safe operating condition. Perform basic troubleshooting and adjustments to welding machines. Report damaged or unsafe equipment immediately. Education & Experience 1-3 years of welding experience preferred (manufacturing or metal fabrication environment). Previous MIG welding experience required; TIG and stick welding a plus. Ability to pass a welding test at time of interview. Knowledge & Skills Ability to read and interpret blueprints and measurements. Strong understanding of welding techniques, materials, and symbols. Familiarity with basic trailer manufacturing components a plus. Ability to lift 50-75 lbs, work on feet for long periods, and work in varying shop conditions. Fast-paced manufacturing setting with exposure to welding fumes, sparks, noise, and moving machinery. Required use of PPE (welding hood, gloves, steel-toed boots, safety glasses, hearing protection, etc.). May require overtime based on production needs. Physical Requirements Ability to lift and carry up to 75 lbs. Ability to climb, kneel, bend, twist, stoop, and stand for extended periods. Ability to work in hot, cold, or noisy environments. Benefits Medical Health's Savings Account (HSA) Dental Vision 401k Paid Time Off Holiday Pay Pay Range: $20.00 USD to $25 USD Hourly Applicants must be able to pass a pre-employment drug test, background check and physical. Higley Group is an Equal Opportunity Employer and provides opportunity to all employees and applicants and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. It is not intended be an exhaustive list of all responsibilities, duties, and skills required of employees in this classification.

id="is Pasted"> Prep is responsible for blade preparation before final assembly. The Prep Operator will complete mid and final prep operations using a series of different abrasive wheels, sanding belts, polishing compounds and fixtures to produce the desired blade finish for further processing or final assembly. SCHEDULE: Day Shift: Monday - Thursday, 6:00 AM - 4:30 PM. Swing Shift: Monday - Thursday, 4:15 PM - 2:15 AM. Essential Duties and Responsibilities Comply with all standard safety practices, company rules and policies. Verification of complete and accurate paperwork before further processing. Visual inspection or parts pre and post completion of prep operations. Understanding QA visual tolerances set by Buck Knives. Complete all prep operations ensuring that all parts adhere to Buck QA standards. Managing time between baders to ensure there is no disruption in final assembly. Changing out wheels and belts on baders as needed. Inform Lead/Supervisor of any and all quality deviations, mechanical issues, QA/engineering support needed and process nonconformities found. Logging steps and accounting for time accurately within InvTrack. Area cleanliness requirements are kept updated by each shift. QUALIFICATIONS Excellent communications skills and ability to communicate effectively with co-workers and management. Excellent time management abilities. Manual dexterity and ability to manipulate small parts repeatedly throughout the shift. Visual blade inspection with a high degree of scrutiny. Ability to lift 40lbs regularly. Must be able to remain standing for long periods of time. Must have the ability to discern where help/disposition is needed. Ability to read and interpret work instructions. Must possess a sense of urgency, accountability, and professionalism. Able to work well independently and as a team with little supervision. EDUCATION/EXPERIENCE GED/High School Diploma or related experience and training. Experience working within a manufacturing environment a plus. Experience with visual inspection or holding parts to visual standards is a plus. PHYSICAL DEMANDS While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to handle or feel parts; reach with hands and arms. The employee must regularly lift and/or move up to 40 pounds for the duration of the shift. WORK ENVIRONMENT While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. Hearing and eye protection is required while working on the production floor. The work environment may include office areas, manufacturing areas and warehouse/shipping areas.

Custom Glass Fabricator Wage: Starting at $17.00 - $19.00 (Depending on Experience) with 90 Day Evaluation & Pay Rate Change Department: Manufacturing/Production Operations Job Type: Full-time, 2nd Shift - 2:00 pm - 10:00 pm If you are looking for a great position, Visit our office! Summary Glaz-Tech is seeking a skilled and detail-oriented glass fabricator to contribute to our manufacturing process and deliver exceptional glass products at our Boise location. The position entails handling flat glass panes and operation of fabrication machines, such as a polisher machine. These fabricated glass panes are used for shower doors, table tops, mirrors, etc. The glass fabricator will use a variety of tools, machinery, and protective gear to ensure product is produced safely and to the highest quality. Responsibilities may include: Polish and finish glass products using various tools and techniques Handle and organizing glass panes onto machinery, storage racks or transport carts Fabricate glass panes based on customer specifications and/or drawings Operate and maintain glass fabrication equipment, including polishing machines Inspect glass products for defects and correct sizing Requirements: Ability to safely lift over 75 pounds frequently Must be able to read a tape measure down to 1/8” increments Ability to physically stand for 8 hours per day Ability to complete simple computer task Ability to communicate in English Background Check/Drug Screen Qualifications: Must be 18 years or older High School Diploma or equivalent Authorized to work in the US What is Glaz-Tech Industries? Glaz-Tech Industries is a wholesale manufacturer and supplier of residential, commercial, & specialty glass with locations across 7 states. We offer the broadest product line in the flat glass industry including low-e products, laminated glass, tempered safety glass, tinted glass, reflective glass, and specializes in the manufacture of thermal efficient insulated glass units (Dual Pane Units). Why Glaz-Tech Industries? Annual Performance Reviews Health Insurance with Employer Contribution Medical, Dental and Vision Insurance Company Paid Life Insurance 401K Employer Plan Opportunity with Matching Paid Vacation and 6 Paid Holidays Employee Discount Program Job Type: Full-time

$1,500 SIGN ON BONUS AVAILABLE WELDER / FABRICATOR Who We Are: Founded in 2006, Johnson Thermal Systems (JTS) is the largest and leading provider of Power Packaging, Power Distribution Centers and Industrial Refrigeration Units. Located in Caldwell ID, our 107,000 sq ft facility is built on 11 acres and houses our 200+ employees. At JTS, we are proud to have a 'work focused' culture that demands the very best of our staff. As a company, we are committed to ongoing training and education to ensure, every job we complete is right the first time. Our 'On Time" ethic is what makes our clients return, project after project. Why You Are Needed: As a Welder you will be responsible for fabricating stainless steel metal products in the construction and assembly of Power Packaging Units. What You Will Receive in Return: Competitive Salary 120 hours of PTO 9 Paid Holidays Health/Dental/Vision Insurance Corporate Health Club Membership with CRUNCH FITNESS 401k with 2% match What You Will Need To Succeed: Must have at least 2 years experience in a manufacturing or construction environment, preferably using hand and power tools. Operating Press Break/Shear a plus. Sets up and operates specialized equipment and tooling for fabrication of stainless sheet metal products Assembles, lifts, positions and removes work pieces from machinery Prepares metal for fabrication, welding, painting or shipping Understands and adheres to established safety and quality procedures Maintains a clean work area which includes equipment kept in safe operating condition Performs all tasks to ISO standards and requirements Break down top level drawings. Program parts. Build prototypes units Layout blank sizes. Calculate circumference. Determine best use of material. Load and run programs. Calculate bend radius. Blueprint reading. Reading and applying decimal chart. Using dial calipers and other inspection gauges. Die handling and safety. Install, align, and lock/flip specified punches, dies, or other fixtures in rams or bed of brake press, using hand tools. Clean and lubricate machines. Load and unload material as needed using a forklift. Knowledge of machines and tools, including their uses. Knowledge of materials, methods, and the tools involved in the fabrication of sheet metal structures Ability to interpret blue-prints and drawings. Mathematical skills such as adding, subtracting, multiplying, dividing, fractions and using a tape measure. Ability to effectively interact and communicate with individuals at all organizational levels. Ability to conduct self in a respectful and appropriate manner. Ability to safely perform tasks and produce a quality product in an efficient and productive manner to meet schedule. Ability to reason and apply principles of logic to a wide range of factors when monitoring and working on jobs. Being reliable, responsible and dependable Ability to work independently without constant supervision. JOIN OUR GROWING TEAM TODAY! ##ZR

Reference Number: 4010 Department: Engineering Most communications will be done electronically. Please check email, including spam folders, daily. If you wish to solicit an employee referral for this position, please ensure the employee submits the referral prior to submitting your application. Description Become part of a dedicated group of Welder Helpers who have been instrumental in maintaining Union Pacific's railroad tracks for over 150 years! As a Welder Helper, you will actively contribute to the repair, tempering, and cutting of rails, frogs, switches, and other essential welding tasks. Your efforts in repairing or replacing tracks will play a vital role in ensuring the safe and efficient movement of trains, enabling Union Pacific to serve its customers across North America. We are powered by our people, will you join our team? Required Certifications:For this position, you will be required to become a Union Pacific certified driver during your probationary period. To become certified, you must meet the following Motor Vehicle and Medical Requirements: 1. Must be a minimum of 21 years of age 2. Have valid driver's license 3. Have an acceptable driving record per your Motor Vehicle Record (MVR) 4. Acquire your Commercial Driver's License (CDL) if you will be operating a vehicle(s) with a GVWR of 26,000 lbs or greater. If this is required, you will need to obtain your CDL during your probationary period. Medical Requirements:Must meet the medical requirements (also called physical qualifications) for commercial motor vehicle drivers as specified by the US Federal Motor Carrier Safety Administration (FMCSA). The FMCSA physical qualifications for drivers can be found on the FMCSA homepage. Health and Medical Services at Union Pacific Railroad will make the final determination on whether or not an individual meets the FMCSA medical qualifications, and may add additional medical requirements to assure the person can safely perform job tasks, with or without accommodation. Accountabilities * Perform track maintenance activities such as repairs, installations, and component removals as required. * Utilize load/unload devices to handle and transport track materials and equipment. * Monitor track conditions for any issues or defects, while also observing the right-of-way and passing trains for any shifted loads or spillages. * Operate equipment safely and efficiently to drive spikes, tighten or loosen track bolts, and utilize pullers to remove spikes. * Maintain the trackbed by replacing and compacting ballast, as well as assisting in unloading ballast from ballast cars. * Foster positive relationships with colleagues, supervisors, contractors, and customers, and effectively manage conflicts when they arise. * Ensure compliance with all safety rules, operational guidelines, and regulations set by the Federal Railroad Administration (FRA). * Carry out additional assigned duties as necessary. Qualifications - Required * Possess a current and valid driver's license. * Hold a Commercial Driver's License (CDL) of either Class A or Class B, or have the ability to obtain one during the probationary period. * Capable of comprehending and interpreting regulations and instructions. * Demonstrates strong verbal and written communication skills to effectively convey information to colleagues and supervisors. * To be considered for this position, candidates are required to successfully complete an assessment in English before proceeding to the interview stage. For more information go to the FAQs on UP.jobs. Qualifications - Preferred * Valid Commercial Driver's License (CDL) - Class A or Class B. * Minimum of 1 year experience in Railroad Maintenance of Way work. * Demonstrated experience working outdoors in diverse weather conditions, including professional, personal, or volunteer work. * Proficiency in working within a construction-type environment, gained through professional, personal, or volunteer experience. * Skilled in operating heavy equipment such as construction or farm machinery, with relevant experience in professional, personal, or volunteer capacities. * Proficiency in welding or possession of a welding certificate, gained through professional, personal, or volunteer experience. * Flexibility and willingness to work on-call, overtime, various shifts (including weekends and holidays), and up to 7 days a week. Physical and Mental Job Requirements * To be considered for employment, candidates must successfully pass a Physical Ability Test (PAT). Please note that this test is separate from the medical exam. For additional details, refer to the FAQs on UP.jobs. * Physical Stamina: Capable of performing physically strenuous work continuously. Occasionally, bending, stooping, and kneeling may be necessary. * Manual Dexterity: Must possess manual dexterity with eye-hand coordination, allowing for precise and coordinated movements. * Lifting and Carrying: Occasionally, there is a need to lift and carry objects weighing up to 65 lbs. Additionally, pushing and pulling objects weighing up to 119 lbs may be required. * Balance and Mobility: There may be occasions when climbing ladders is necessary to access truck storage. The ability to walk frequently and maintain balance on various surfaces is essential. * Prolonged Standing: The job requires the ability to remain standing for more than half of each workday. There will be periodic opportunities to change positions for comfort. Work Conditions * Minimum age requirement: Applicants must be at least 21 years old. * Must be legally authorized to work in the United States without requiring company sponsorship. * Comfortable working in close proximity to large equipment, including railcars, locomotives, and cranes. * Preference given to candidates who are willing to reside and work in specific locations indicated in the job listing. * Strong commitment to practicing and maintaining safe work practices. * Flexibility in terms of travel: Candidates should be prepared for extensive travel across Union Pacific's 23-state system, which may be required at short notice. What we offer: * A strengths-based, engagement-focused, and performance-oriented culture * Ongoing learning, development, and Educational Assistance (including little to no out-of-pocket cost for online and in-person courses at the University of Nebraska at Omaha) * 401(k) retirement plan * Employee Stock Purchase Plan with 20% match up to 5% * Medical, dental and vision insurance, which are collectively bargained for through union membership * Wellness and Employee Assistance Programs

Hours worked per week: 40 Daily Shift: 8 or 10 Hour Shift Depending on Season Work Schedule: ___Su X M X T X W X Th X Fr ___Sat The City of Helena is an equal opportunity employer. The City shall, upon request, provide reasonable accommodations to otherwise qualified individuals with disabilities. Job Purpose: The purpose of this position is to perform duties as a skilled Mechanic and Welder in servicing, repairing, rebuilding, manufacturing, system designing, fabricating specialized parts, diagnosing, and troubleshooting of special equipment and motorized vehicles. Position performs a variety of routine and highly technical skills associated with the maintenance and report of gasoline and diesel vehicles, machinery, and equipment. Types of equipment involved are parks maintenance mowers and lift trucks, solid waste refuse trucks, sewer cleaning equipment, snow removal equipment, street sweepers, fire apparatus, transit buses and vans, police protection vehicles, fleet cars and pickups and includes all facets of heavy equipment used in street, water, and sewer maintenance. Essential Duties: These job functions are the essential duties of the position and are not all-inclusive of all the duties the incumbent may be assigned. Duty I: Diagnosing and performing repairs on City vehicles 75% Time Essential Tasks: ? Repairing heavy equipment using a variety of tools and software. Using up-to-date online and standard technical manuals and manufacturer tech support. ? Repairing heavy/ light duty vehicles while utilizing scan tools and online programs like Mitchell On Demand. ? Repairing Emergency vehicles Police/Fire. Outfitting new police vehicles with cages and necessary equipment, and programing emergency lighting on vehicles. ? Servicing and inspecting vehicles on a scheduled basis. As well as Preforming preventative maintenance. ? Repairing HVAC systems on a wide range of different vehicles and Equipment. ? Performing complex electrical system repairs dealing with multiplexing and traditional systems. ? Performing complex hydraulic system repairs involving air over hydraulic/electric over hydraulic. Duty 2: Repairing light equipment/welding/fabricating 15% Time Essential Tasks: ? Repairing/servicing Lawn mowers and grounds keeping equipment. ? Repairing/servicing ATVs for multiple departments. ? Welding/Fabricating on a wide array of equipment. ? Parts ordering Duty 3: Entering maintenance records 10% Time Essential Tasks: ? Entering vehicle data into fleet software to maintain accurate vehicle information on repairs and parts costs. ? Attend safety training and use that knowledge to safely perform the job functions. ? Attend shop meetings to discuss work assignments and vehicle repair progress. Essential Knowledge, Skills, and Abilities Related to this Position: Knowledge of: * The operation, repair, and preventive maintenance of light and heavy gasoline and diesel-powered vehicles and equipment and automotive apparatus. * Journeyman level experience in equipment repair and operational knowledge of equipment such as, but not limited to semi-tractors and trailers, dump trucks with snowplow and sand spreaders, front end loaders, backhoe / loaders, air compressors, water and sludge pumps, front, rear and side loading refuse trucks, grizzly loaders, sewer jet and vac trucks, road graders, hot asphalt patch and slurry seal trucks, sludge injection vehicles, street sweepers, police response units, complex fire apparatus, bucket lift trucks, light and heavy-duty cars and pickups, power mowers, and miscellaneous other city equipment. * Arithmetic, algebra, geometry, calculus, statistics, and their applications in this profession. * The hazards and safety precautions of the trade, and use of protective clothing or gear (PPE) while exposed to power tools and equipment, caustic, and hazardous materials, or while performing physical activities. * The principles and operation of internal combustion engines, gas, and diesel engines. * Methods, materials, tools, and standard practices of the auto/diesel mechanics' trade. * Circuit boards, processors, chips, electronic equipment and computer hardware and software, including application and programs applicable to this profession. * The hazards and safety precautions of the mechanic's trade. * Steering and suspension systems and electrical systems and equipment. * Techniques and practices of gas and arc welding. Skill or ability to: * Use tools and equipment including, but not limited to, air tools, jacks, and hoists, mechanic's hand and power tools, all arc welding, oxyacetylene and cutting equipment, machining, and metal fabrication equipment, measuring gauges and instruments, and sophisticated electronic and other diagnostic equipment including laptop computers with diagnostic software, along with various miscellaneous tools and equipment needed for this specific profession. * Repair machines or systems using the needed tools * Determine causes of operating errors and decide on the best method of repair. * Watch gauges, dials, or other indicators to make sure equipment is working properly * Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. * Identify complex problems and review related information to develop and evaluate options and implement solutions. * Determine the correct kind of tools and equipment needed to do a job. * Understand the implications of latest information or both current and future problem-solving and decision making. * Start, drive, or operate equipment or devices to test performances and troubleshoot/diagnose, detect and isolate causes of equipment failures and make required repairs. * Must be able to respond to emergency situations and demands, calmly and efficiently. * Maintain service records, estimate costs and materials; order parts and maintain an inventory * Quickly and repeatedly adjust the controls of a machine or vehicle to exact positions. * Be careful about detail and thorough in completing work tasks. * Communicate effectively orally and in writing and follow oral and written instructions. * Establish and maintain effective working relationships and communication with coworkers, administration, other agencies and technical experts. Use teamwork to obtain objectives and goals for the department. Physical Demands: The nature of mechanics' work involves bending, crawling, stooping, and climbing, reaching over the head, talking, hearing and visualization to affect repairs. Must be able to perform strenuous physical activity in lifting, carrying, and/or operating the tools, equipment and materials needed to fulfill the position of mechanic/welder. Requires the ability to move or lift items weighing up to 50 to 75 pounds. The work is performed in or near the vehicle maintenance shops, in an environment with exposure to dust, fumes, noise, odors, grease, caustic and hazardous materials and adverse weather conditions. Has constant contact with, moving parts, electrical, high pressure and high speed power tools and special equipment. Safety Performs all functions in the safest possible manner and according to policies and procedures. Participates fully with safety training. Reports unsafe work conditions and practices, work-related injuries, illnesses, and near-misses as soon as possible to assigned supervisor. Minimum Qualifications (Education, Experience and Training): This position requires a minimum of graduation from mechanics trade school AND high school graduation/GED OR equivalent with 5 years' experience to equal a certified journeyman auto/diesel mechanic. Other relevant Combinations of education and work experience may be evaluated individually. License or Certificate: Must obtain a valid MT Class B CDL within six months of hire with air brakes and taker endorsement and acceptable driving record

Job Summary: Weld team members are responsible for welding quality trailer with outstanding service in a safe manner and must be able to manufacture in a fast paced, team-oriented environment while maintaining a clean and organized work area. id="is Pasted"> Ensure your own safety by always using designated personal protective equipment (PPE) and tools designed and rated for the task, complying with safety regulations and maintaining a clean and organized workspace. Report to work on time to support production startup and throughput goals. Operate all power tools and machinery on the weld line(s) effectively and respectfully. Read and understand work orders and work instructions. Perform quality checks and product inspections by completing final inspection sheets, as directed by assigned production supervisor. Perform daily inspections on equipment prior to shift startup to ensure the safety of you and your coworkers, as well as the operational effectiveness of equipment. Assist in other areas and perform other duties, as needed. (This is not intended to be a comprehensive list of activities, duties, or responsibilities required for this job.) id="is Pasted"> Qualifications and Requirements High School Diploma / GED, or equivalent demonstrated skills and abilities in directly job-related experiences. Possess good physical stamina and coordination with the ability to safely lift 50 pounds with prolonged periods of standing. Able to work 10 hour shifts with potential overtime. Willing to submit a pre-employment background check. Able to work in a self-directed way to manage multiple demands of time and attention in a fast-paced manufacturing environment. Benefits Medical Insurance Dental Insurance Vision Insurance Critical Illness Insurance Accident Insurance Supplemental Life Insurance (Employee, Spouse and Children) 401(k) contribution after 30 days + company match on first 3% Weekly Accrued PTO Company Paid Short Term and Long-Term Disability Company Paid Life Insurance id="is Pasted"> ************* id="is Pasted"> Novae LLC provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Novae LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Summary: Weld team members are responsible for welding quality trailer with outstanding service in a safe manner and must be able to manufacture in a fast paced, team-oriented environment while maintaining a clean and organized work area. Ensure your own safety by always using designated personal protective equipment (PPE) and tools designed and rated for the task, complying with safety regulations and maintaining a clean and organized workspace. Report to work on time to support production startup and throughput goals. Operate all power tools and machinery on the weld line(s) effectively and respectfully. Read and understand work orders and work instructions. Perform quality checks and product inspections by completing final inspection sheets, as directed by assigned production supervisor. Perform daily inspections on equipment prior to shift startup to ensure the safety of you and your coworkers, as well as the operational effectiveness of equipment. Assist in other areas and perform other duties, as needed. (This is not intended to be a comprehensive list of activities, duties, or responsibilities required for this job.) Qualifications and Requirements High School Diploma / GED, or equivalent demonstrated skills and abilities in directly job-related experiences. Possess good physical stamina and coordination with the ability to safely lift 50 pounds with prolonged periods of standing. Able to work 10 hour shifts with potential overtime. Willing to submit a pre-employment background check. Able to work in a self-directed way to manage multiple demands of time and attention in a fast-paced manufacturing environment. Benefits Medical Insurance Dental Insurance Vision Insurance Critical Illness Insurance Accident Insurance Supplemental Life Insurance (Employee, Spouse and Children) 401(k) contribution after 30 days + company match on first 3% Weekly Accrued PTO Company Paid Short Term and Long-Term Disability Company Paid Life Insurance ************* Novae LLC provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Novae LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Summary: Weld team members are responsible for welding quality trailer with outstanding service in a safe manner and must be able to manufacture in a fast paced, team-oriented environment while maintaining a clean and organized work area. Ensure your own safety by always using designated personal protective equipment (PPE) and tools designed and rated for the task, complying with safety regulations and maintaining a clean and organized workspace. Report to work on time to support production startup and throughput goals. Operate all power tools and machinery on the weld line(s) effectively and respectfully. Read and understand work orders and work instructions. Perform quality checks and product inspections by completing final inspection sheets, as directed by assigned production supervisor. Perform daily inspections on equipment prior to shift startup to ensure the safety of you and your coworkers, as well as the operational effectiveness of equipment. Assist in other areas and perform other duties, as needed. (This is not intended to be a comprehensive list of activities, duties, or responsibilities required for this job.) Qualifications and Requirements High School Diploma / GED, or equivalent demonstrated skills and abilities in directly job-related experiences. Possess good physical stamina and coordination with the ability to safely lift 50 pounds with prolonged periods of standing. Able to work 10 hour shifts with potential overtime. Willing to submit a pre-employment background check. Able to work in a self-directed way to manage multiple demands of time and attention in a fast-paced manufacturing environment. Benefits Medical Insurance Dental Insurance Vision Insurance Critical Illness Insurance Accident Insurance Supplemental Life Insurance (Employee, Spouse and Children) 401(k) contribution after 30 days + company match on first 3% Weekly Accrued PTO Company Paid Short Term and Long-Term Disability Company Paid Life Insurance ************* Novae LLC provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Novae LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description We are seeking a skilled and dependable Welder to join our fabrication shop team at Verto Steel in Emmet, ID. The ideal candidate will have experience welding and fabricating metal components according to drawings and specifications. This position offers steady work, a team-oriented environment, and opportunities for growth. Responsibilities Perform welding and fabrication using MIG, TIG, and/or Stick processes Read and interpret blueprints, drawings, and work orders Cut, fit, and assemble metal components Operate shop equipment safely (grinders, saws, presses, etc.) Inspect finished work to ensure quality and accuracy Maintain a clean and safe work area Assist with loading/unloading materials as needed Qualifications Previous welding or fabrication experience preferred Ability to read and understand fabrication drawings Strong attention to detail and workmanship Reliable, punctual, and team-oriented Preferred (Not Required) CDL (Commercial Driver's License) is a plus, but not required Forklift or overhead crane experience Welding certifications Benefits Competitive pay based on experience Overtime opportunities Health insurance / retirement plan Paid time off and holidays Stable, long-term employment

The Welder position is responsible for accurately reading and interpreting blueprints, drawings, and specifications to meet project requirements. This role involves fabricating large fuel tanks-up to 60 feet long and 13 feet wide-designed to hold 3,000 to 10,000 gallons of diesel fuel. The welder must ensure strict adherence to safety standards by wearing required PPE and following all safety guidelines throughout the process. Accountabilities: Read and interpret blueprints, drawings, and specifications to determine welding requirements. Prepare materials by cleaning, cutting, and positioning components for welding. Set up, operate, and maintain welding equipment and tools. Weld components using manual or semi-automatic equipment in multiple positions. Inspect welds to ensure compliance with specifications and quality standards. Complete quality checklists at each stage of the process. Work with various metals, including steel, aluminum, and stainless steel. Prepare surfaces by removing slag, rust, grease, and scale prior to welding. Maintain a safe and clean work environment by following all safety protocols and wearing required PPE. Report hazards, near misses, and unsafe conditions promptly. Collaborate with team members and supervisors to meet production goals. Perform other duties as assigned to support welding and fabrication operations. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Attributes Safety First: Adheres to all safety protocols and promotes a hazard-free workplace. Have Humanity: Works respectfully and collaboratively with team members. Be Transparent: Communicates clearly about progress, challenges, and safety concerns. Drive Innovation: Suggests improvements to welding processes and tools for efficiency. Be Resilient: Adapts to changing priorities and production demands with a positive attitude. Always Reliable: Consistently delivers accurate, high-quality work. Grit: Handles physically demanding tasks with persistence and pride in craftsmanship. Required Knowledge/Experience: High school diploma or equivalent required; welding certification preferred. 2+ years of welding experience, preferably in manufacturing or heavy equipment. Experience with 7024 welding rods and .045 wire MIG preferred. Ability to read and interpret blueprints and engineering drawings. Familiarity with welding machinery, electrical equipment, and manual tools. Strong mechanical aptitude and attention to detail. Knowledge of jobsite safety regulations and PPE requirements. Reliable, responsible, and respectful team player. Must pass a background check and drug screening. Work Environment and Physical Demands Manufacturing environment with exposure to indoor and outdoor conditions. Ability to stand, kneel, stoop, or crouch for 8-10 hours per day. Frequent use of hands for handling tools and components. Must be able to lift up to 50 lbs and push/pull up to 100 lbs (following OSHA standards). Visual and auditory ability to navigate safely and communicate effectively. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

A Combination Welder will weld, fabricate and assist pipe fitters in installation of varying types of industrial pipe into the projects piping systems. This position will also require assisting fitters, rigging, and knowledge of process piping. Qualification Highlights * Must have the ability to weld in 2g, 4g, and 6g conditions. * Must be able to SMAW (Stick) and Carbon Steel Pipe. GTAW (Tig) Carbon & Stainless Pipe. * Must have current applicable welding certification with Zachry or be able to successfully pass a weld test. * Must have 4+ years welding experience. * Must have all required knowledge, skills, and abilities. * Must be able to meet all physical requirements. Position Responsibilities * Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. * Layout, position, aligns, cut, assemble, and fit metal components together in various body positions and in various places. * Bolts, clamps, and tack-welds parts to secure in position for welding. * Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc, or arc gas welding equipment. * Weld metal materials to piping systems equipment using the appropriate welding procedure for the various equipment and metal types involved. * Identify all equipment for job and process. * Identify all safety risks and requirements. Preferred Additional Qualification * Current Zachry or Zachry ROF'ed employee. * Former experience working with Zachry Industrial, Inc. * Previous experience in this position with Zachry Industrial, Inc. * Current Zachry Certification. * Experience working as an Industrial Pipe Fitter. * Former experience working an a Combined-Cycle power plant construction project. JOB REQUIREMENTS Physical Requirements * Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. * Will talk and hear to communicate. * Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will work at slight heights, climb ladders and stairways, and may occasionally work off of platforms using the appropriate fall protection requirements. * Must be able to work in weathering conditions including heat conditions while wearing appropriate PPE. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and leather work boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. #LI-KL1

This position will fabricate, install and repair mechanical systems, research equipment and structural components. It will repair and maintain mechanical equipment and perform welding on structural components. Duties may include: * Provide fabrication and maintenance support * Use hand-welding, flame-cutting, hand-soldering and brazing equipment to join metal components, fill holes, indentations and seams of fabricated metal products * Fabricate custom-made parts * Fit, align and assemble fabricated parts; clean and finish projects to meet specifications * Rebuild and manufacture replacement parts of complete mechanical assemblies * Determine cause of failure or wear and select appropriate repair/replace method * Communicate and coordinate with supervisors, coworkers, faculty and students to develop efficient, cost-effective plans * Interpret plans, blueprints, schematics, manuals and verbal instructions to determine project scope * Provide CEE laboratory support for teaching * Maintain CEE laboratory space and equipment * Provide CEE laboratory support for research * Coordinate COE Laboratory Safety Program * Other duties as assigned

The J.R. Simplot Company is a diverse, privately held global food and agriculture company headquartered in Boise, Idaho. We are a true farm-to-table company with an integrated portfolio including food processing and food brands, phosphate mining, fertilizer manufacturing, farming, ranching and cattle production, and other enterprises related to agriculture. Summary The Maintenance Mechanic/Welder works independently and with other maintenance personnel to perform preventative, predictive and routine maintenance tasks and welding tasks. This role includes troubleshooting issues, repairing failures of production and mobile equipment, and ensuring maximum equipment efficiency and effectiveness. This person provides direction for effective execution of maintenance activity on all machinery and equipment throughout the mine. The Maintenance Welder/Mechanic is also responsible for the optimum utilization of available resources such as manpower, equipment, time, etc. This person must be responsible for decisions, actions and failures; must establish clear responsibilities and processes for monitoring work and measuring results. In addition, the maintenance welder/ mechanic must partner with others to get work done and work cooperatively with others across the organization to achieve shared objectives. Key Responsibilities * Perform minor and major welding repairs on mobile equipment. perform line boring tasks, fabricate materials and components for special projects. Typical Education * High School Diploma of General Education Degree (GED) Relevant Experience * 3+ years related experience and/or training Other Information * Experience with welding and cutting equipment, hydraulics, pneumatics, and mechanics * Ability to read and interpret documents and drawings and write detailed repair reports * Ability to analyze and make decisions * Ability to diagram equipment control problems * Strong verbal and written English communication skills * Good organizational and planning skills. * Preferred: Experience with Climax line boring equipment. * Must be able to perform each essential duty satisfactory, and represent the knowledge, skill and/or ability required. * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical Requirements: * Lift and move heavy equipment * Climb ladders and work in high, precarious places. * Working Environment: * May be exposed to wet or humid conditions * May be exposed to outdoor weather conditions * May be exposed to high noise environments * May be exposed to chemicals used in the process * Could be in temperatures of -30 degrees. Job Requisition ID: 24649 Travel Required: None Location(s): ABW Smoky Canyon Mine - Afton Country: United States The J.R. Simplot Company is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, religion, national origin, ancestry, age, sex, gender, gender identity, gender expression, genetic information, physical or mental disability, medical condition, sexual orientation, military or veteran status, marital status, or any other protected status.

Job Summary: Weld team members are responsible for welding quality trailer with outstanding service in a safe manner and must be able to manufacture in a fast paced, team-oriented environment while maintaining a clean and organized work area. Ensure your own safety by always using designated personal protective equipment (PPE) and tools designed and rated for the task, complying with safety regulations and maintaining a clean and organized workspace. Report to work on time to support production startup and throughput goals. Operate all power tools and machinery on the weld line(s) effectively and respectfully. Read and understand work orders and work instructions. Perform quality checks and product inspections by completing final inspection sheets, as directed by assigned production supervisor. Perform daily inspections on equipment prior to shift startup to ensure the safety of you and your coworkers, as well as the operational effectiveness of equipment. Assist in other areas and perform other duties, as needed. (This is not intended to be a comprehensive list of activities, duties, or responsibilities required for this job.) Qualifications and Requirements High School Diploma / GED, or equivalent demonstrated skills and abilities in directly job-related experiences. Possess good physical stamina and coordination with the ability to safely lift 50 pounds with prolonged periods of standing. Able to work 10 hour shifts with potential overtime. Willing to submit a pre-employment background check. Able to work in a self-directed way to manage multiple demands of time and attention in a fast-paced manufacturing environment. Benefits Medical Insurance Dental Insurance Vision Insurance Critical Illness Insurance Accident Insurance Supplemental Life Insurance (Employee, Spouse and Children) 401(k) contribution after 30 days + company match on first 3% Weekly Accrued PTO Company Paid Short Term and Long-Term Disability Company Paid Life Insurance ************* Novae LLC provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Novae LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

The Welder position is responsible for accurately reading and interpreting blueprints, drawings, and specifications to meet project requirements. This role involves fabricating large fuel tanks-up to 60 feet long and 13 feet wide-designed to hold 3,000 to 10,000 gallons of diesel fuel. The welder must ensure strict adherence to safety standards by wearing required PPE and following all safety guidelines throughout the process. Accountabilities: Read and interpret blueprints, drawings, and specifications to determine welding requirements. Prepare materials by cleaning, cutting, and positioning components for welding. Set up, operate, and maintain welding equipment and tools. Weld components using manual or semi-automatic equipment in multiple positions. Inspect welds to ensure compliance with specifications and quality standards. Complete quality checklists at each stage of the process. Work with various metals, including steel, aluminum, and stainless steel. Prepare surfaces by removing slag, rust, grease, and scale prior to welding. Maintain a safe and clean work environment by following all safety protocols and wearing required PPE. Report hazards, near misses, and unsafe conditions promptly. Collaborate with team members and supervisors to meet production goals. Perform other duties as assigned to support welding and fabrication operations. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Attributes Safety First: Adheres to all safety protocols and promotes a hazard-free workplace. Have Humanity: Works respectfully and collaboratively with team members. Be Transparent: Communicates clearly about progress, challenges, and safety concerns. Drive Innovation: Suggests improvements to welding processes and tools for efficiency. Be Resilient: Adapts to changing priorities and production demands with a positive attitude. Always Reliable: Consistently delivers accurate, high-quality work. Grit: Handles physically demanding tasks with persistence and pride in craftsmanship. Required Knowledge/Experience: High school diploma or equivalent required; welding certification preferred. 2+ years of welding experience, preferably in manufacturing or heavy equipment. Experience with 7024 welding rods and .045 wire MIG preferred. Ability to read and interpret blueprints and engineering drawings. Familiarity with welding machinery, electrical equipment, and manual tools. Strong mechanical aptitude and attention to detail. Knowledge of jobsite safety regulations and PPE requirements. Reliable, responsible, and respectful team player. Must pass a background check and drug screening. Work Environment and Physical Demands Manufacturing environment with exposure to indoor and outdoor conditions. Ability to stand, kneel, stoop, or crouch for 8-10 hours per day. Frequent use of hands for handling tools and components. Must be able to lift up to 50 lbs and push/pull up to 100 lbs (following OSHA standards). Visual and auditory ability to navigate safely and communicate effectively. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Powered by JazzHR rRY1XKZUOR