Welder jobs in Jackson, MS

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions-from design and installation to ongoing maintenance and emergency support-helping clients maximize building performance, energy efficiency, and equipment lifespan. About the role We're hiring an experienced pipefitter/welder to lead a truck-based field crew for the Jackson Team. This role runs point on daily work planning, onsite fit-up/welding, quality checks, and mentoring helpers-delivering safe, code-compliant installs on schedule. What you'll do Lead the truck/crew: Plan the day's work, assign tasks, verify materials/tools, and communicate with the Project Manager/Superintendent. Layout & fit-up: Read prints/isometrics/ P&IDs; field-measure and fabricate spools; install hangers/supports. Welding: Perform SMAW/GTAW/FCAW (carbon/stainless; structural/process) to spec; prep joints; maintain heat control and bead quality. Quality & documentation: Follow WPS, complete weld maps/heat numbers, support inspections, close punch lists. Safety: Enforce JHAs/LOTO, maintain housekeeping, ensure PPE compliance, and drive zero-incident culture. Equipment & truck care: Maintain truck inventory, tools, and consumables; submit needs and keep equipment in serviceable condition. Mentor talent: Coach apprentices/helpers; model best practices and workmanship standards. Install and fit Victaulic grooved piping systems per spec (gaskets, couplings, fittings) with proper groove verification and QA sign-offs. Perform Aquatherm fusion pipe fitting (butt fusion, socket fusion) following manufacturer procedures and project WPS; maintain heat logs and fusion records. What you'll bring 5+ years pipefitting/welding experience; 2+ years in a lead/crew-lead role running a truck or small crew. Strong print/isometric reading; able to lay out, cut, thread/groove, and fit from drawings. Proficient in SMAW and GTAW (TIG) on carbon/stainless; FCAW a plus. Ability to pass shop/field weld tests (e.g., 2G/3G/6G as required). Familiar with AWS D1.1/D1.3 and job-book practices (weld maps, continuity logs, NCR closeout). Solid understanding of rigging, hoisting, and hot-work procedures. Valid driver's license and insurable MVR; comfortable driving/operating a company truck. Ability to lift 50+ lbs, climb/stoop, and work at heights or in confined spaces as required. Hands-on experience with Victaulic grooved systems and Aquatherm fusion methods (or strong aptitude to learn). Nice to have Current CWI/CW familiarity or prior work with inspectors. CDL or ability/interest in obtaining one; field fabrication experience (shop/field hybrid). Current Aquatherm fusion training/certification. Benefits: Competitive salary based on experience. Health, dental, and vision insurance. Paid time off and holiday pay. Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Full-time Description Main Purpose: To perform job functions required and assigned in the fabrication of structural/piping materials per the contract/job specifications and quality assurance requirements/fitting procedures and established ISO/QC program standards. The Welder's job duties are to properly weld structure or pipe to construct a drilling deck. This position is located Offshore in the Gulf of America, formerly known as the Gulf of Mexico. Essential Functions: Set and operate welding machine for applicable welding processes. Perform welding processes assigned for structural, pipe, and welding projects. Pass required welding test per AWS D1.1 latest edition, ASME section IX, and API 1104. Maintain quality of welding that can pass NDT testing procedures. Perform welding assignments safely and efficiently, always practicing safety. Operate appropriate hand tools (chipping hammers, grinders, etc.) Weld separately or in combination, using aluminum, stainless steel, cast iron, carbon steel, and other alloys. Select and install torches, torch tips, filler rods, and flux according to welding chart specifications or any thickness of metals. Determine required equipment and welding methods, applying knowledge of welding techniques. Connect and turn regulator valves to activate and adjust gas flow and pressure to obtain desired flames. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking distortion, or expansion of the material. Expertly welds small, medium, and large structural and pipes of various metals and alloys. Expertly welds small, medium, and large structural items. Be able to weld structure (beams, grating, stairways) and pipe. Assist with building a scaffold to access all areas on structure, pipe, or deck. Pull up leads to weld on deck. Transport welding equipment in the yard to the work area. Benefits Offered: Earned Wage Access Health, Dental, and Vision Insurance 401(k) with Company Match Paid Holidays Paid Vacation Life Insurance Disability Insurance Safety Awards Company Store Employee Assistance Program (EAP) Requirements Physical Requirements: Standing: This is an essential job function/physical requirement. Walking: This is an essential job function/physical requirement. Turning, twisting, bending, and stooping- These physical requirements are essential job functions. Pushing and Pulling- These physical requirements are essential job functions. Reaching, forward, and overhead are essential job functions /physical requirements. Climbing: This is an essential job function /physical requirement. Balancing, fingering, feeling, talking, hearing, and seeing are all considered regular physical duties/requirements and would be needed/required to work in this industrial environment safely and efficiently. Lifting - employees must lift to 25 pounds and occasionally 50-75 pounds. Job Requirements: Must successfully demonstrate the ability to pass a practical welding test: 6G SMAW and 6GR SMAW and 6GR FCAW. Must have a minimum of 2 years of Offshore experience. Must be able to pass pre-employment physical and drug screen. Must be able to pass a background check. Ability to communicate effectively, both verbally and in writing. TWIC card Desirable Experience, Education, and Training: Highschool diploma or GED. Experience with 6G and 6GR -SMAW and FCAW welding. Tools, Equipment, and Technology: Welders must know and use: welding machines, man lifts, chipping & grinding equipment, cutting torches, welding leads, welding whips, and welding guns. All appropriate safety equipment used to perform their everyday welding duties (welding shields, goggles, hard hats, etc.) Environmental Conditions: 80 to 90% of the work activities are performed outdoors. Individuals will be required to work in changes of temperature, hot, cold, humid, wet, and dry conditions, dust, mud, etc. May also be exposed to fumes (Paint, paint thinners, diesel, /or gas, etc.) Gulf Island will not sponsor applications for work visas. Additionally, applicants for employment with Gulf Island must be currently authorized to work in the United States on a full-time basis. Accordingly, Gulf Island will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Gulf island is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Gulf Island employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Gulf Island. No recruiting placement fee will be paid in the event Gulf Island hires the candidate due to the referral or through other means.

Job Description Are you a talented welder looking to travel and work on exciting projects across the country? Tanco Engineering wants to hear from you! With over 40 years in the industry, we're proud of our reputation for safety, reliability, and excellence. As a Storage Tank Welder with us, you'll play a critical role in ensuring the quality and safety of storage tanks. You'll join a friendly team that values your skills and contributions while giving you the chance to work in varied locations, meeting new people, and tackling interesting challenges. At Tanco Engineering, we believe in teamwork and open communication. You won't just be a number; you'll be a valued part of our family. So, if you're ready for an opportunity to shine, let's make it happen! Position Duties: Utilize your welding skills to ensure the structural integrity of storage tanks through various techniques like stick and flux core welding. Read and interpret blueprints to ensure your welding tasks meet all specifications. Inspect your work for quality control, promptly addressing any issues you may uncover. Work alongside your team to ensure projects are completed efficiently and on time. Maintain a safe work environment by following all safety protocols. Keep your welding equipment in top shape with routine maintenance and troubleshooting as needed. Requirements At least a year of welding experience, ideally in the storage tank industry. Attention to detail with a skill for spotting potential defects. A willingness to lift heavy equipment and engage in physically demanding tasks. Strong communication abilities coupled with a collaborative spirit. A passion for travel and the flexibility to work in various locations. A TWIC card might be required Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Background checks will also be included in the hiring procedure. Must be over 18 and eligible to work in the United States. Benefits Medical, dental, & vision insurance Retirement plan & ESOP Competitive pay with annual reviews. Join our team and enjoy competitive starting pay of $30-$34 per hour, which may vary depending on your experience and the results of your welding test. In addition to the attractive pay range, we offer a subsistence allowance of $125 (exceptions may apply per location) and reimbursement of $0.70 per mile for travel (when applicable).

This is your opportunity to join the Fence industry leader! Master Halco, one of the nation's largest wholesale distributors of fencing products is seeking a Welder to work at our branch. The Welder's responsibilities include: Prepare, cut pipe sections using table or jig saw, then setup lay-up sections Weld pipe using MIG/ARC welding equipment and techniques. Complete projects using manufacturing work orders and/or verbal instructions Locate materials to complete project This is a very exciting time to join our company. We are continuing to grow (70 locations), introducing new products, making technological investments, and implementing innovative marketing strategies. We are also focused on our people -- our most important resource. At Master Halco, we believe in transparency, open communication, and rewarding success with a path to fully develop your potential while building a career. If you enjoy a fast-paced work environment and the opportunity to show us your best customer service skills, this is the right place for you! Working With Us Has Its Rewards: Competitive wage of $22.00 per hour Longevity Bonus Monday through Friday schedule, day shift A competitive health care plan typically effective after 31st day of employment A generous matching 401(k) plan Tuition reimbursement up to $10K per academic year Bonus Opportunities A generous paid-time off package, and more Master Halco offers advancement opportunities at every level. We are always looking for people with the drive to learn and determination to succeed. Responsibilities Uses verbal or written instruction from work orders and collects materials for processing Cuts pipe using pipe cutting equipment Lays out pipe sections on a jig or table and welds with MIG/ARC welding equipment and techniques, applies cold galvanizing solution to protect welds Performs visual inspection on completed work ensuring quality Maintains a clean and safe work area Performs other warehouse and gate fabrication duties as required Qualifications 2-3 years welding experience with MIG, ARC Experience working with hand tools Able to lift/move heavy materials (up to 75lbs) Ability to read, write and perform basic math functions Ability to perform own layouts using jigs Ability to work around heat and chemicals Must be able to work overtime as needed

We are looking for an experienced Combo Welder to join our team. Responsibilities: Must be able to observe and recognize problems during the welding process and adjust speed, voltage, amperage, or feed of the rod accordingly Must be able to read and interpret prints and plans Minimum of 4-5 years' experience required Perform code (ASME, AWS or API) compliant welds using GMAW, SMAW, GTAW & FCAW processes Properly use fabrication shop hand tools. (grinders, drills, air tools, etc.) Operate forklifts & overhead cranes Operate vertical/horizontal band saws Rig, hoist/lift & move materials Maintain safe and clean work environment Required to adhere to all safety rules and regulations Qualifications: Must be able to weld qualification test coupon for; FCAW and/or GMAW welding process in the 3G & 4G position using Carbon Steel plate. SMAW and GTAW welding processes in the 6G position with Carbon and/or Stainless Steel pipe. Positive “can do” attitude & strong work ethic. Ability to take detailed instruction. Willing to be challenged to improve welding skills to meet high quality standards. Must be able to read & understand weld symbols, weld procedures, mechanical and structural drawings. Knowledge of OSHA guidelines and safe work practices. Must be able to use Oxy/fuel & Plasma hand cutting torch. Daily housekeeping of shop and/or work area. Flexible working schedule to support project needs. Considered a Plus: ASME pipe welding experience Fit-up & layout experience on structural/misc. steel and pipe spools Experience with machine equipment such as mill or drill press Familiarity with weld inspections and related NDE (RT, MT, PT) Pipe welding experience with ASME B31.3, B31.4 and API 1104 codes Fit-up, layout & welding experience on structural/misc. steel Familiarity with weld inspections, inspection documentation and NDE (RT, UT, MT, PT) Formal/technical education Join Us Mullins Mechanical ranked #243 on the 2024 ENR Top Specialty Contractors list, #48 in the Nation and #5 in the Southeast among Firms in Mechanical. We're proud to be one of the fastest growing privately held companies in America. We're a self-performing specialty contractor specializing in design-build applications, HVAC systems, plumbing, process piping systems, boiler and chiller systems, equipment installation and rigging, plant relocation and maintenance, fire protection, and metal fabrication. Our projects are often in industrial and heavy commercial environments such as manufacturing facilities, automotive plants, chemical plants, distribution centers, warehouses, data centers, and other large facilities.

Join Our Team as a Welder/Fabricator at A-1 Kendrick Fence in Pearl MS! Are you an experienced Welder looking for a new opportunity with a reputable company? Look no further! A-1 Kendrick Fence is seeking a skilled Welder/Fabricator to join our team in Pearl, MS. As a Welder at A-1 Kendrick Fence, you will have the opportunity to showcase your welding expertise on a variety of projects. Responsibilities: Perform welding duties using a variety of tools and techniques Read and interpret blueprints and drawings to determine the specific requirements of each project Fabricate and assemble metal structures Inspect and test welds for accuracy and quality Adhere to safety standards and protocols at all times Requirements: Minimum of 2 years of welding experience Certification in welding preferred Ability to work independently and as part of a team Strong attention to detail Excellent problem-solving skills If you are a skilled Welder looking to advance your career in a dynamic work environment, then A-1 Kendrick Fence is the place for you! Join our team and be a part of our commitment to quality craftsmanship and customer satisfaction. About A-1 Kendrick Fence: A-1 Kendrick Fence has been a trusted provider of fencing solutions in Pearl, MS for over 50 years. We specialize in residential, commercial, and industrial fencing services, including installation, repair, and maintenance. Our team of experienced professionals is dedicated to delivering top-notch quality workmanship and exceptional customer service.

Integrity has an exciting opportunity to for an Aluminum Welder in New Orleans, LA. This is a long-term contract that offers Per Diem! About This Role Requires 1-3 years of aluminum welding experience in all positions, specifically using GTAW (Tig Welding) process. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding. Climbing on and over bulkheads, up and down ladders, etc. Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line) Lifting of material and tools (jacks, porta-powers, come-a longs, etc). Also loading and unloading of parts. Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner Walking on tops of frames and tees (uneven walking surfaces) Qualifications Prefers aluminum welding certificate from recent experience. Level will be determined based on relevant experience, scope of role, skills, etc Education Requirements: Must have high school diploma, GED or equivalent certificate, or bronze level (or higher) for ACT WorkKeys Certification. Schedule: Monday-Thursday: 5:30am-4pm #I08

Department: Operations FLSA Status: Non-Exempt Grade/Level: Job Type: Regular Work Schedule: Flexible Schedule Job Status: Full Time Reports To: Shop Foreman Amount of Travel Required: None Positions Supervised: None POSITION SUMMARY Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Weld per AISC D1.1 per drawings in a quality and productive manner. Steel Service: Building Excellence, Empowering Careers At Steel Service, we don't just build steel structures-we build futures. Since 1969, we've been a trusted leader in the steel construction industry, completing major projects across the U.S. and beyond. Headquartered in Flowood, Mississippi, we're proud to hold the American Institute of Steel Construction (AISC) certification with a Sophisticated Paint Endorsement (SPE), a testament to our commitment to quality. Our mission for our Welder position is simple: to be the Preferred Steel Contractor for customers worldwide. We achieve this through a culture of safety, excellence, and innovation, always delivering on time and exceeding expectations. Whether it's engineering, fabrication, or installation, our team works with cutting-edge technology like 3D modeling to ensure precision and collaboration at every step. But Steel Service is more than a workplace, it's a place where your career thrives. We empower our employees with opportunities to grow, innovate, and make a real impact in an environment that values integrity and teamwork. If you're looking for a career where you can be part of something big, join us in building the future, one beam at a time. Ready to make your mark? Steel Service is waiting for you. Essential Functions Statement(s) Weld components in flat, vertical, or overhead positions. Operate safety equipment and use safe work habits. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. Clamp, hold, tack-weld, heat-bend, grind, or bolt component parts to obtain required configurations and positions for welding. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Remove rough spots from workpieces, using portable grinders, hand files, or scrapers. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter. Preheat workpieces prior to welding or bending, using torches or heating furnaces. Develop templates and models for welding projects, using mathematical calculations based on blueprint information. Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools. Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal. Detect faulty operation of equipment or defective materials and notify supervisors. Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. Fill holes and increase the size of metal parts. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. Operate metal shaping, straightening, and bending machines, such as brakes and shears. Set up and use ladders and scaffolding as necessary to complete work. Hammer out bulges or bends in metal workpieces. Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. Signal crane operators to move large workpieces. Use fire suppression methods in industrial emergencies. Estimate materials needed for production and manufacturing and maintain required stocks of materials. Join parts such as beams and steel reinforcing rods in buildings, bridges, and highways, bolting and riveting as necessary. Gouge metals, using the air-arc gouging process. Mix and apply protective coatings to products. Operate brazing and soldering equipment. Requirements SKILLS & ABILITIES Education: High School Graduate or General Education Degree (GED): Required Experience: 1 plus years of experience in Welding Certifications & Licenses: Must be a certified welder per AISC D1.1 Other Requirements:

Job DescriptionJob Title: Class 1 Welder Job Type: Full-Time Pay Range: $24/hr + $100 per diem We are seeking experienced Class 1 Welders for full-time positions in Jeanerette, LA. This role involves welding aluminum in a ship/boat building environment. Candidates must be proficient in reading blueprints, welding in multiple positions, and adhering to safety and quality standards. Hours: Monday-Friday, 6:00 A.M. - 5:00 P.M. (40 hours per week) Potential for overtime on weekdays and weekends Education or Required Experience: 3 to 5 years of experience in the ship/boat building industry welding aluminum Must be able to read blueprints Must be able to tack, distribute heat evenly, and lay a clean bead Must be able to pass a Pre-Employment Mock Weld Test Required Skills: Strong attention to detail to support a high-quality assurance program Excellent math skills and ability to read a tape measure accurately Proficient in either fitting or welding aluminum Ability to repair defective welds Ability to weld in all positions (uphill, downhill, horizontal, pipe, or flat) Safe operation of power equipment in compliance with safety standards Strong work ethic Ability to operate power tools (grinders, saws, drills, etc.) Good communication skills and ability to work well in a team Physical Requirements: Must be able to lift up to 50 lbs Must be able to stand, bend, stoop, squat, or kneel regularly Must be able to climb stairs and ladders as needed to perform tasks Ameri-Force Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes:• Industry Leading Pay • Medical Coverage • Dental Coverage • Vision Coverage • Short Term Disability Benefits • Term Life Benefits • Referral Bonuses Referral Bonuses are available for specific jobs only About Ameri-Force Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker's compensation. In addition, we offer a comprehensive benefits package, including medical, dental, vision, short-term disability, and life insurance, tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Learn more at ameriforce.com Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law.

Join Our Team as an Aluminum Welder! Are you a skilled Aluminum Welder looking for an exciting opportunity to showcase your talents? Look no further! Unite Contracting in Harvey, LA, is seeking a dedicated Aluminum Welder to join our dynamic team. PAY: $23 TO $25 HOURS: 45 TO 53 HOURS PER WEEK Job Responsibilities: Performing high-quality aluminum welding according to specifications Reading and interpreting blueprints and drawings Ensuring the proper maintenance and care of welding equipment Adhering to safety standards and protocols Collaborating with team members to complete projects efficiently Qualifications: Proven experience as an Aluminum Welder Strong attention to detail and accuracy Ability to work independently and in a team environment Excellent communication and problem-solving skills Welding certification is a plus Benefits: Competitive pay Opportunities for growth and advancement Health and wellness benefits Supportive and inclusive work environment Training and development programs About Us Unite Contracting is a leading provider of construction and contracting services in Harvey, LA. With a focus on quality, safety, and integrity, we take pride in delivering exceptional results for our clients. Our team of skilled professionals is dedicated to excellence in every project we undertake. Join us in shaping the future of construction and make a difference with Unite Contracting.

Job Details Division: Rytec Corporation Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Basic Job Functions: The primary responsibility of the Vinyl/PVC Welder is to setup and operate the vinyl RF welder according to the production schedule. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: Measure, review and layout PVC/Vinyl materials per the order specifications. Set up and program welder and make any necessary changes. Change out tooling when necessary. Weld material using the vinyl RF welder. Inspect and examine work pieces to ensure quality of material meets the requirement of the customer. Perform repairs and preventive maintenance of vinyl RF welding equipment. Keep area clean and organized. Knowledge of the product flow and processes. Strong mechanical background. Ability to read and interpret reports, work instructions and blueprints. Ability to safely operate a forklift and an overhead crane. Requires operating hand tools, power tools and pneumatic tools, fabrication tools and measuring devices. Ability to read and interpret documents such as safety rules, operating and maintaining instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to lift 30 - 75 pounds occasionally. Squatting, kneeling and standing frequently Preferred Qualifications: High school diploma or general education degree (GED) desired; or two to four years related experience and/or training; or equivalent combination of education and experience. Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

Secondary Welding Instructor HINDS COMMUNITY COLLEGE JOB TITLE: Secondary Welding Instructor REPORTS TO: CTE Director DEPARTMENT: Vicksburg Secondary EXEMPT: VICE PRESIDENT: Of Career and Technical Education, Sponsored Grants, and HBCU Initiatives Job Description: Hinds Community College is seeking a qualified and motivated Secondary Welding Instructor to join our Career and Technical Education team. The instructor will deliver high-quality instruction in welding processes and techniques to high school students enrolled in dual credit/dual enrollment courses, preparing them for successful careers and industry certification in welding and fabrication. GENERAL STATEMENT OF THE FUNCTION All Hinds Community College employees must commit to the Caring Campus approach to student engagement and daily apply these general behavioral objectives: listen to student questions and concerns with a positive attitude and make meaningful connections with students. QUALIFICATIONS REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE Applicants with an associate degree must have at least two years of verifiable occupational experience in the past ten years. Experience must be appropriate to the subject to be taught. - Applicants with a bachelor or higher degree must have at least one year of verifiable occupational experience in the past ten years. Experience must be appropriate to the subject to be taught. An educator with a standard five - year license may use experience outside of the ten - year timeframe. - Applicant must earn a passing score on a Welding (performance & written)* Assessment: TOCA at RCU-Welding or hold American Welding Society (AWS) Certification or NCCER welding assessment. The performance assessment should include successful completion of seven test plates out of the fourteen test plates listed in the curriculum (please see curriculum for list). Or - Other teacher occupational competency assessment approved by MDE Office of Career and Technical Education SUPERVISORY RESPONSIBILITIES: Manage high school students and maintain a professional environment. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hand to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee frequently is required to stand, walk, sit, taste and smell. The employee is frequently required to sit. The employee is occasionally required to stand; walk; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. While performing the duties of this job, the employee is regularly required to use hand to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee frequently is required to stand, walk, sit, taste and smell. The employee is frequently required to sit. The employee is occasionally required to stand; walk; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. * Teaches high school students the occupational competencies necessary for employment. * Keep prompt, up-to-date, accurate records of attendance, grades, and other reports. * Prepares course competency-based outlines for each instructional course or program. * Prepares detailed lesson plans, job sheets, and laboratory experiments for all units of instruction. * Recommends changes in the total curriculum in order to maintain and up-to-date program. * Develops and maintains the progress of each student in the program. * Teaches related subject matter. * Develops a schedule of courses for each semester. * Reviews and selects instructional materials such as textbooks and audio visual materials. * Completes requests for supplies and other instructional materials on a timely basis. * Completes enrollment and follow up reports. * Assists in the development of an annual budget for the instructional program. * Maintains a clean and safe laboratory environment. * Recommends new and/or replacement equipment to be purchased for the new program. * Maintains proper inventory of all equipment and tools assigned to the program. * Keeps equipment functioning and in good working order by establishing an effective preventive maintenance system. * Maintains an active advisory committee. * Maintains a good industry relationship for the purpose of student placement for potential employees and donations. * Takes an active role in the advisement, counseling of students and register students. * Helps students find employment in an occupation related to training. * Fulfils the requirements of a technical certification by attending specified classes and workshops. * Serves on various faculty committees. * Attends faculty meeting and professional development workshops and training. * Issue to students a course syllabus or policy letter at the beginning of the semester and objective sheets for each unit of the course during the semester. * Keep classes in session for the full scheduled time. (Classes identified in the schedule as independent study classes will meet according to requirements of the instructor.) * Set aside sufficient time for student conferences, guidance, and tutorial assistance. (Minimum of 6 hours per week required) * Follow the required institutional process for recording student attendance and identifying "no-shows" in a timely manner. * Participate in student/teacher and faculty/administrator evaluations and performance review conferences. * Meet reporting requirements of the State Office of Vocational Technical Education. * Develop a personal and professional improvement plan in those areas deemed necessary as a result of evaluations. * Participate in departmental meetings, formulation, execution, and evaluations of departmental goals and objectives. * Cooperate in the execution of the college, division, and department policies. * Participate in staff development activities, professional associations, presentations, publications, applied educational research, consulting, evaluations, and similar activities which enhance the individual and the education profession. * Use teaching techniques that include the effective utilization of resources that motivate students to achieve their potential. * Present a personal appearance in keeping with contemporary community standards for a professional person. * Maintain current credentials and certifications as required in respective field. * Perform other duties as assigned by the appropriate authority. Other duties may be assigned. Maintain knowledge of diversity-related issues, legislation, and best practices. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate, and the employee is occasionally required to perform job responsibilities in the outdoors and off site. We promote a culture of inclusion for all employees that respects individual strengths, ideas, and capabilities. We believe that our differences enable us to make better decisions, drive innovation, and deliver better results. Mission Hinds Community College is committed to moving people and communities forward by helping develop their purpose, passion and profession. Vision Hinds Community College will be a catalyst to create a competitive economy and a compelling culture for Mississippi. Values Hinds Community College aspires to the following IDEALS: * Integrity * Diversity * Excellence * Accountability * Leadership * Stewardship In compliance with Title VI of the Civil Rights Act of 1964, Title IX, Education Amendments of 1972 of the Higher Education Act, Section 504 of the Rehabilitation Act of 1973, the Americans with Disabilities Act of 1990 and other applicable Federal and State Acts, Hinds Community College offers equal education and employment opportunities and does not discriminate on the basis of race, color, national origin, religion, sex, age, disability or veteran status in its educational programs and activities. We recognize our responsibility to provide an open and welcoming environment that fosters a culture of diversity, equity, and inclusion for employees and students to collaboratively learn, work and serve our communities. The following have been designated to handle inquiries regarding these policies: EEOC Compliance: The Office of Human Resources Box 1100 Raymond MS 39154; Phone: ************ or Email: ****************. Title IX: Vice President Student Services, Title IX Coordinator Box 1100 Raymond MS 39154; Phone: ************ or Email: *******************. Full Time/Part Time: Full time Position Type: 10 Month 200 Days Job Classification: Faculty - Technical, Faculty - Vocational Scheduled Hours: 35

Aluminum Pulse Welder The Aluminum Pulse Welder welds together structural metal components as specified in blueprints, work orders or oral instructions. Key Responsibilities: Obtains the appropriate tools needed for a particular job and subsequently sets up their equipment. Binds together structural metal components that have been pre-assembled and tacked into place. Performs good, cosmetic sound welds. Examines his/her work and may chip off excess weld, slag, and splatter with the appropriate tools. (i.e. grinder, chipping hammer, etc.). Leaves little to no rework when the job is complete. (i.e. cold rolls, pin holes, wraps, burn throughs, etc.). Troubleshoots his/her equipment. May gouge/grind to remove a member, make a seam sound, remove weld reinforcement, etc. Must be able to work in confined spaces. Must be able to work to work/climb in elevations greater than 5". Must be able to wear/work a respirator when applicable. Qualifications: Certified in 3G and 4G in at least 3 or more of the following disciplines preferred: flux core, short arc, aluminum, aluminum heliarc, stainless steel, carbon-to-stainless steel, and submerged arc. Able to make a full penetration weld that will pass NDE Testing. (i.e. x-ray, ultrasound, magnetic particles, dye penetrant). Able to lay out track marks. Able to identify most used welding symbols. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

Job Description Role Title: 1st Class Aluminum Welder Employment Type: Temporary /Full Time Shift: Days Job Summary: We are seeking experienced 1st Class Aluminum Welders for a Shipyard that does outside repair work in Lockport. Candidates must be willing to work 40 -50 hours. All welders will have to pass an Aluminum welders' test. Key Requirements Must Have ·Must pass a drug screen. ·Minimum 3 years of experience as an Aluminum Welder. ·tools for welding Preferred Qualifications ·Experience with industrial or Fabrication shop welding. ·Strong knowledge of welding safety procedures. ·Proven reliability and consistent attendance. ·Experience working indoor and outdoor welding environment.

We're looking for Welders with aluminum welding experience who are excited to grow their careers while supporting critical energy infrastructure projects across the U.S. This hands-on field role offers the opportunity to work on a wide variety of job sites, including power plants, hydroelectric dams, and large-scale industrial facilities. You'll focus on systems such as Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers. You will be part of a fast-growing team that takes pride in safety, quality, and craftsmanship. What You'll Do: Weld aluminum components in multiple positions (vertical, horizontal, overhead - 6G test required) Read and interpret construction, welding, and electrical drawings Rig, lift, align, and set electrical bus duct equipment based on plans and specifications Demo, fit, and install new mechanical components as part of system upgrades Maintain tools and welding equipment in a safe, working condition Conduct safety checks and inspections; identify and address wear, defects, and deterioration Operate electrical testing equipment, including Hi-Pot, Ductor, and Megger Work effectively alongside field technicians, project teams, and other trades Complete daily job reports and timesheets Operate company vehicles and follow RMS Energy's safety and driving policies Follow strict safety and PPE usage protocols due to noise, electrical hazards, and elevated work areas Take initiative and work independently with minimal supervision The Experience We're Looking For: 3+ years of aluminum welding experience (MIG required, TIG preferred) Familiarity with medium and high voltage electrical equipment Ability to read and interpret technical drawings and field documentation Knowledge of OSHA safety standards, including PPE use and working at heights Experience with substation construction or electrical bus installation is preferred Proficient in operating forklifts, manlifts, and other field equipment Additional Requirements: Willingness to travel up to 75% across the continental U.S. High school diploma or GED required Valid driver's license with a history of safe and responsible driving Must pass a background check and drug/alcohol screening Legally authorized to work in the United States Available for extended and irregular hours as needed Able to work outdoors in all weather, at heights (100+ ft), in confined spaces, and around high-voltage equipment and heavy machinery Physically capable of lifting 50+ lbs and enduring extended physical activity Requires good vision, hearing, and English proficiency for safe, effective communication in noisy environments Bonus Points for: Completion of a trade school program, technical college, associate degree, or skilled trade certification in welding or a related field is strongly preferred TWIC Card CDL License Prior experience working with Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers Why Join RMS Energy: We're not just another power services company. We're a tight-knit, mission-driven team that values safety, teamwork, innovation, and continuous growth. Competitive Compensation - Overtime potential and merit-based raises Full Benefits - Medical, dental, and vision coverage fully paid for employees, starting the month after hire Steady Employment & Career Growth - Be part of a fast-growing company with promotion potential 401(k) with Company Match - Traditional & Roth options + free investment guidance Top-Tier Equipment - Provided to support you in the field Compensated Travel Time plus Per Diem - Earn while seeing new places Education Support - Paid training, certifications, and industry memberships Generous PTO - Paid vacation, holidays, and sick leave Employee Assistance Program - Legal, financial, and mental wellness support Want to be part of something meaningful? Apply today and join a team where People, Purpose, and Power come together - your future starts here. RMS Energy is an Equal Opportunity Employer. We believe diverse teams drive better outcomes, and we're committed to creating an inclusive environment where all employees feel valued and empowered. For more information about RMS Energy, please visit ******************

Why Work with TEL Staffing & HRAs a trusted maritime staffing partner, TEL Staffing & HR connects skilled tradespeople with leading shipyards that build and repair vessels supporting our nation's defense and commercial maritime sectors. Join a team that values craftsmanship, safety, and excellence on the waterfront.What You Can Expect from TELAt TEL, we believe that taking care of our people is the foundation of our success. That's why we offer a comprehensive compensation and benefits program designed to rival those of Fortune 500 companies: Top Industry Pay - We offer the highest wages in the industry to recognize your skill and dedication. Per Diem Opportunities - Available for qualifying team members to support travel and living expenses. Sign-On Bonuses & Relocation Assistance - We invest in bringing the best talent on board. Paid Time Off - Enjoy vacation, sick leave, and holiday pay to support a healthy work-life balance. Exceptional Insurance Benefits - TEL owns its own insurance company, which means the savings come directly to you. Our team members enjoy access to high-quality, low-cost coverage, including family plans: Health, Vision, and Dental Cancer and Critical Care Short- and Long-Term Disability Life Insurance Legal Plans Pet Insurance 401(k) Retirement Plan with Company Match - Plan for your future with confidence and grow your savings with our matching contributions. Aluminum Welder/Fabricator TEL Staffing - Maritime DivisionSummaryTEL Staffing's Maritime Division is seeking experienced Aluminum Welders/Fabricators to support shipbuilding and vessel repair operations at leading U.S. shipyards. This position plays a critical role in building tactical and commercial aluminum workboats that support America's maritime future. The ideal candidate will have hands-on experience in aluminum vessel fabrication, proficiency in multiple welding processes, and the ability to work in a fast-paced production environment while meeting rigorous NAVSEA and AWS quality standards. This is primarily a shipyard/shop environment role with occasional offsite assignments as needed.Key Responsibilities Operate required safety equipment and maintain safe work practices in accordance with OSHA, NAVSEA, and shipyard regulations. Fabricate and fit aluminum components for marine vessel construction and repair. Perform welding in 2G, 3G, 4G, and 6G positions using GTAW, GMAW, and GMAW-P processes. Accurately interpret NAVSEA or AWS-approved Weld Procedure Specifications (WPS). Conduct first-line quality checks using gauges such as fillet weld gauges, V-WAC, and bridge cam to ensure compliance with NAVSEA and AWS standards. Set up and program welding power supplies, selecting correct filler metals and support equipment for each job. Perform plasma cutting, beveling, clamping, tacking, grinding, heating, and bolting of components to prepare assemblies for final welding. Monitor welding operations to minimize distortion, shrinkage, and overheating-critical for aluminum fabrication. Inspect completed work for defects, verifying dimensional accuracy and conformance to specifications. Read and work from shipyard drawings, fabrication sketches, QA packages, and 3D models. Operate and maintain hand and power tools commonly used in shipyard fabrication (e.g., grinders, sanders, band saws, bending tools). Coordinate daily activities with Production Managers and Shop Supervisors to maintain project milestone schedules. Follow all procedures to ensure proper mil-spec filler wire and base metals are used per WPS. Support other shipyard trades as required to meet production goals. Work to detailed Statements of Work (SOW) and QA Work Packages for both new builds and vessel modifications. Required Qualifications Documented experience as an aluminum welder/fabricator in a shipyard or marine vessel production environment; apprenticeship or journeyman certification preferred. Proficiency in GTAW 5xxx and GMAW-P 5xxx aluminum welding processes. Ability to weld PQR plates to qualify new company procedures. Ability to achieve Level II Visual Testing (VT) NDT certification per company procedures. Prior qualification to NAVSEA and AWS (D1.1 & D1.2) standards. Strong knowledge of weld symbols, joint configurations, tolerances, and aluminum weld defect correction. Ability to weld dissimilar metals and varying material thicknesses. Must be eligible to obtain and maintain access to military or government installations. Preferred Qualifications Multiple welding process certifications (e.g., aluminum, steel, MIG/TIG, pipe). Broad fabrication experience with various sheet metals and shipyard tooling. Certified forklift and man-lift operator. Previous experience working on tactical or government vessel programs is a plus. Required Tooling Lockable personal toolbox. Standard fabrication and layout tools. Personal welding tools and full-face welding shield. Larger tools (e.g., drills, grinders) and consumables are provided by the company. All basic tools must be obtained within 90 days of hire; additional tools may be required as work scope evolves. Physical Demands• Regular lifting of 50+ lbs, bending, stooping, crawling, and overhead work. • Ability to work in confined spaces, on scaffolding, and in various weather conditions typical of shipyard environments. • Tolerance for noisy, fast-paced industrial settings while maintaining focus on quality and safety. Equal Employment Opportunity and Affirmative Action Statement TEL Staffing & HR, TEL Staffing, Inc., and all affiliated TEL companies are proud to be Equal Employment Opportunity (EEO) and Affirmative Action employers. We are committed to providing a workplace that is inclusive, respectful, and free from discrimination. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected under applicable federal, state, or local law. We also take affirmative action to employ and advance in employment qualified minorities, women, individuals with disabilities, and protected veterans. The TEL group of companies are dedicated to fostering an environment where all employees can thrive and contribute to our collective success. If you require a reasonable accommodation to apply or participate in the employment process, please contact Human Resources at [email protected]

At Hitachi Energy our purpose is advancing a sustainable energy future for all. We bring power to our homes, schools, hospitals and factories. Join us and work with fantastic people, while learning and developing yourself on projects that have a real impact to our communities and society. Bring your passion, bring your energy, and be part of a global team that appreciates a simple truth: Diversity + Collaboration = Great Innovation General information: Hitachi Energy is seeking Welder for its Crystal Springs, Mississippi location. This role is responsible for for assembly pieces of a transformer utilizing the Flux Core Arc Welding (FCAW) process. Employees have job duties that also include; reading blueprints, cutting metal, measuring and cutting materials and checking tolerances on finished work. Available shifts: First Shift: 7:00am - 2:30 pm Second Shift: 3:00 pm - 11:30 pm Responsibilities: * Handle transformers, welded assemblies, and miscellaneous parts with an overhead crane, jib hoist, and/or fork truck. * Identify parts and assemble transformers or assemblies from assembly prints. * Set up and connect welding machine, wire feeders, welding guns, and shielding gas regulators for Flux Core Arc Welding (FCAW) process. * Perform welding work as directed by Welding Supervisor. * Remove welds on transformers or other parts using the Air Carbon Arc Gouging process (electric arc and compressed air) or another method. * Perform air tests on certain portions of the transformer as required. * Perform grinding on transformers or welded assemblies as required. * Knowledge and ability to perform Flux Core Arc Welding (FCAW) on stainless steel and carbon steel. * Observe and follow all Hitachi Energy Safety protocols. * Attend Safety meetings and morning Start-up meetings as required. * Complete the required transformer checklists and documents. * Must successfully pass Hitachi Energy Welder Qualification tests. Your background: * Diploma of vocational (welding) studies preferred. * Knowledge and skills acquired through previous experience. * 1-year previous FCAW welding experience. * Knowledge in material handling and operation of hand power tools. * Knowledge of properly reading and understanding assembly/fabrication prints. * Attention to detail and self-motivated. Work with minimal supervision. * Ability to work any shift, weekends and holidays. Equal Employment Opportunity (EEO)-Females/Minorities/Protected Veterans/Individuals with Disabilities Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

The following link can be used to access the Welding Instructor position at Hinds Community College-CTE in Vicksburg, MS: ****************************************************************************************************************

Job Details Mississippi - Crystal Springs, MS Full Time $45000.00 EducationDescription Responsible for providing students with industry recognized instruction and training in the Career Technical Training Center leading to full-time jobs, higher education or advanced training. Ensures strict confidentiality of sensitive information and integrity of student data. MANAGEMENT & SUPERVISION N/A RESPONSIBILITIES o Follows all integrity guidelines and procedures and ensures no manipulation of student data. o Ensures Center meets or exceeds DOL/Company performance goals. o Responsible to provide students with training leading to Career Technical Training completion and industry-recognized certifications. Provides students with comprehensive and individualized case management that ensures student progress, achievement and completion of the Job Corps program. o Provides quality career technical training that leads to student placement. Provides students with job leads and monitors placement of all graduates. o Ensures classroom is well organized and conducive to student learning. Holds students accountable for following Center's dress code/behavioral standards of conduct. o Produces quality work/assignments in a thorough, timely and accurate manner. o Maintains appropriate personal attendance, accountability and work productivity standards. o Plans, prioritizes and organizes assignments to meet established goals and deadlines. o Understands and applies job knowledge to effectively complete all required job responsibilities. Proactively maintains the skills required to perform job duties. o Mentors, monitors and models the Career Success Standards as required by the PRH. This job description includes data that shall not be disclosed outside the Corporation and shall not be duplicated, used or disclosed - in whole or in part - for any purposes. o Provides high-quality supervision and management for the student population. Takes swift and appropriate action and positively influences student behavior. Shows respect and courtesy to students and holds them accountable for their actions and behavior. o Provides quality programs and services for students and ensures that quality is maintained and student needs are met. Pursues improvement and enhancement of programs and services. o Exchanges ideas and information, both orally and in writing, in a clear and concise manner and contributes meaningfully to group efforts by offering relevant ideas and knowledge. Provides quality and timely information to DOL/Company when requested. o Effectively articulates thoughts and ideas. Identifies problems, analyzes causes and evaluates appropriate solutions prior to taking or recommending actions. Follows up to ensure prompt/appropriate action is taken and that problems are in fact corrected. o Works in partnership with staff from all Departments to ensure effective supervision and services are provided to students. o Accepts direction and supervision from the Center Director/Center Duty Officer/Shift Manager to include assignments to temporarily perform job responsibilities of other departments and positions. o Other duties as assigned. Adams and Associates, Inc. abides by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibits discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, national origin, protected veteran status or disability. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Qualifications QUALIFICATIONS & EXPERIENCE A minimum of one-year experience in teaching or related field required. Certified, licensed, or accredited in the state in which the center is located, or is accredited by a professional trade organization. For NTC, instructor must be certified by union or trade organization, or by a national trade certifying organization. Previous Job Corps experience preferred. Must possess a valid Drivers License and meet company insurability requirements. Physical requirements include sitting, standing, climbing, walking, lifting, pulling and/or pushing, carrying, reaching, stooping and crouching. Demonstrates the ability to lift 40 pounds and/or the ability to assess the lift load in order to ask for necessary assistance. (Depending upon trade)