Welder jobs in Kansas

Check all associated application documentation thoroughly before clicking on the apply button at the bottom of this description. Job Status/Type: Full Time Hourly Mid Level (5 years experience minimum) Shift/Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Benefits: * Several medical coverage options to fit your needs best * 401K match * FREE entry to ALL our parks and water parks! Perks: * Complimentary tickets for friends and family * Discounts on food and park merchandise * Full-time and part-time employee events and gatherings Responsibilities: Responsibilities * Weld items as specified by layout, blue prints, weld procedures, diagrams, work orders, and oral directions. * Operate machine shop equipment when required or needed. * Weld in flat, vertical, or overhead positions. * Clean and degrease weld joints or work pieces using brush, grinder, or chemicals. * Prepare broken parts by grooving or scarfing surfaces. * Capable of positioning work piece using clamps or jigs. * Able to follow all company policies, rules, and regulations. * Perform Ride Mechanic duties when welding is not available. Qualifications: Qualifications: Knowledge, Skills & Abilities: Ability to handle plumbing tools and equipment (pipe wrenches, pipe cutters, plungers etc.). Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs. Education: High school graduate or equivalent. Related degree or vocational training preferred. License or Certification: Able to pass company required performance tests including 6G weld test in 2" and 8" steel pipe within 60 days of employment. xevrcyc Experience : Typically requires 5 years welding experience Equivalency : Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Job DescriptionDescription: Job Purpose: The Welder performs duties related to steel production. Essential Functions include the following. Other duties may be assigned. Sets and modifies welding machine settings per materials and parameters, makes welds according to specification on prints and inspects finished product. Troubleshoots and fixes welds as needed or required by QC Inspector. Performs weld on steel products to the applicable code (ASME & API Codes). Follows prints accurately and operates grinders and other hand tools. Operates overhead cranes and other lifting devices. Accurately maintains required paperwork. Maintains safe and clean working environment by complying with procedures, rules and regulations. Secures tools, materials and equipment at end of day. Follows protocol and procedures documented in the employee handbook. Regular attendance and timeliness. Additional duties as assigned. Requirements: Qualifications and Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or equivalent preferred. Trade school preferred, plus a minimum of 2 years GMAW welding experience preferred, SMAW experience helpful; or 3+ years experience in relative field. Ability to pass GMAW 3G DH internal weld certification test under WPS (Welding Procedure Specification). Excellent written and verbal communication skills, with the ability to clearly communicate detailed information to customers, coworkers and management. Ability to read and interpret documents such as procedure manuals and job instructions with basic problem solving skills. Must be able to measure accurately. Able to read welding symbols preferred. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to calculate figures and amounts such as proportions. Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to manage time effectively and prioritize tasks to meet deadlines. Strong attention to detail and organizational skills. Experience using power tools and hand tools. Ability to maintain confidentiality. Physical Demands and Work Environment: The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to stand, bend, kneel, climb stairs and walk; use hands to finger, handle, or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds for men or 30 pounds for women and is subject to confined spaces (crawling inside pressure vessels). Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. The work environment is usually an indoor setting with frequent exposure to outside elements. The noise level in the work environment is frequently high. Must abide by PPE requirements. Applicants must be 18 years or older. We have an amazing benefits package! Benefits include Competitive Wages(DOE), Paid Health/Dental Coverage, Vision Coverage, Paid Life Insurance, Retirement Plan with an Employer Match, a wide range of supplemental benefits you can pick and choose from to customize your coverage, Uniforms (We even clean them for you.) and Paid Time Off. Pre-Employment Drug Testing is required. Equal Opportunity Employer. Women and minorities encouraged to apply.

Structural Welder for CD&H Inc. in El Dorado, KS area -$22-$26Safety-Driven & Family-Orientated Company / Opportunity for GrowthWe understand the importance of your weekends being free for Family & Friends, our typical working hours are Monday-Friday, 7-530pm. Join Our Team as a Structural Welder! Are you a skilled Structural Welder looking for a new opportunity to showcase your talents? CDH Inc. in El Dorado, KS is seeking a dedicated individual to join our team. As a Structural Welder, you will play a crucial role in the fabrication and assembly of metal structures for various projects. This position offers the chance to work on exciting and diverse projects while honing your welding skills. Responsibilities: Perform structural welding on metal components according to blueprints and specifications Inspect welds for accuracy and quality Operate welding equipment safely and effectively Collaborate with team members to ensure project timelines are met Maintain a clean and organized work environment Qualifications: 3+ years of experience as a Structural Welder Certification in welding preferred Ability to read blueprints and technical drawings Strong attention to detail Good communication and teamwork skills Benefits: CDH Inc. offers competitive wages, a comprehensive benefits package, and opportunities for career growth and advancement. We value our employees and strive to create a positive and supportive work environment where your skills and talents are recognized and appreciated. About CD&H Inc. CD&H Inc. is a leading construction company based in Butler County, Kansas, specializing in commercial and residential construction projects of all sizes. With over 20 years of experience in the industry, we have built a reputation for excellence and quality craftsmanship. Our team of experienced professionals provides our clients with top-notch construction services, from project conception to completion. We take pride in our ability to deliver projects on time and within budget, while maintaining the highest standards of quality and safety. At CD&H Inc., we believe in building strong relationships with our clients, subcontractors, and suppliers, based on trust, integrity, and mutual respect. We are committed to providing a positive work environment for our team members, where they can learn, grow, and thrive. Join us at CD&H Inc. and be a part of a dynamic and innovative construction company that is changing the industry, one project at a time.

Hillsboro, a leader in Truck Bed & Aluminum Trailer Design and Manufacturing, is looking for a reliable and self-driven individual to join our Aluminum Weld Team in Newton, Kansas. The successful applicant will be responsible for an array of tasks associated with the welding and quality assurance of Hillsboro Trailers & Truck Beds at our new Newton Facility. Responsibilities and Duties (include, but not limited to): Aluminum Welding Inspection and Quality Assurance of finished Welds Production support in other areas as needed Qualifications and Skills Must pass an onsite aluminum weld test Self-Motivated Strong attention to detail Excellent work ethic and ability to work within a fast-paced team environment Work Experience Minimum 1 year of experience with Steal and Aluminum welding Benefits Basic and Accidental Death and Dismemberment Insurance (no cost to employee) Short Term Disability Insurance (no cost to employee) Long Term Disability Insurance (no cost to employee) Dental Insurance (Employee Only at no cost) Health Insurance with 70% paid by the company, 30% paid by the employee Dental Insurance for dependents of the employee (optional employee cost) Vision Care Plan (optional employee cost) Flexible Health Care Spending Account (optional employee cost) Dependent Care Spending Account (optional employee cost) Term Life Insurance (optional employee cost) Other Benefits: Earned up to 2 weeks PTO/yearly Holiday Pay Annual Picnic 401k Plan w/ Matching Yearly Profit Sharing depending on Company/Employee performance. Employee Uniform Program Starting Pay will be based on experience.

955 North Haverhill Rd El Dorado Kansas 67042-4806 **_Why Valmont_** **We're Here to Move the World Forward.** Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a _Fortune_ 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. _We are the modern workforce_ . Are you ready to move the world forward? Apply now. 2nd Shift (4:00 pm - 2:30 am; Mon - Sat) Starting Wage $25.24/hr + $1/hr shift differential The Submerged Arc Seam Welder is an Individual Contributor responsible for the set-up and operation of the flux core sub-arc seam welding machine to place a continuous seamed weld on one or two sides of the pole shafts. **Essential Functions:** + Fuse (weld) metal structural components together by means of multiple forms of Submerged Arc Welding processes in the fabrication of steel electrical poles and other structures + Performs welding operations requiring most of the following: planning and layout, working from blueprints and drawings or other specifications; requires a knowledge of welding properties of a variety of metals; setting up work and determining operation sequences; welding objects involving critical safety and load requirements; working in a variety of positions + Perform repetitive types of assembling operations according to procedures established by others; and use hand tools and measuring devices in the performance of work + Move pole shafts using an overhead crane and gather parts and materials to complete the project + Other duties as required and/or assigned **Important Details about the Role:** + Setup, operate, and perform general maintenance of equipment without difficulty + Make mathematical calculations in preparing product or setting up the machinery + The employee must maintain a safe and productive work environment producing a quality product which is shipped complete and on time to satisfy the needs of the customer + The employee has a direct impact on safety, quality, productivity, and delivery + This position reports to the Production Supervisor **Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities):** + Successful completion of an internal welding test + Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) + Knowledge of welding properties of a variety of metals + The ability to read and interpret blueprints and/or shop drawings + The ability to set up work and determine operation sequence + The ability to calculate formulas using basic mathematics and standard U.S. and Metric Measurements + The ability to recognize and solve practical problems or issues + The ability to work in a team environment with a diverse group of people + The ability to pay attention to detail and follow work instructions + The ability to meet production, safety, and quality standards in a high-paced working environment + The ability to lift up to 50 pounds, with most frequent lift up to 20 pounds + Wear required personal protective equipment and follow facility safety regulations + Maintain a safe and productive working environment **Highly Qualified Candidates Will Also Possess These Qualifications:** + High School Diploma or GED equivalent + Graduation from an accredited trade school for welding + Three years or more of previous experience in a manufacturing or fabrication environment + One or more years of previous experience welding in a professional environment + Must have a high awareness for safety at all times + Must be a person of passion and integrity who has the drive to excel and deliver exceptional results **Benefits** Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: + Healthcare (medical, prescription drugs, dental and vision) + 401k retirement plan with company match + Paid time off + Employer paid life insurance + Employer paid short-term and long-term disability including maternity leave + Work Life Support + Tuition Reimbursement up to $5,250 per year + Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. Valmont is here to modernize vital infrastructure and increase agricultural productivity, sustainably and reliably. We galvanize steel to last a century with minimal environmental impact. We modernize irrigation to feed a growing population by utilizing the latest technology. We harden the electrical grid to enable the delivery of reliable power to millions of homes around the world. And we help make communities everywhere safer, cleaner and more connected through our smart infrastructure technology. Valmont serves two primary markets - agriculture and infrastructure - and seven diverse product lines: Utility, Lighting and Transportation, Telecom, Solar, Coatings, Irrigation and Ag Tech. We manufacture products in 85 facilities spread across six continents, and we do business in 100 different countries. That's what Valmont does. We conserve resources and improve life, finding ways to make innovation and technology beneficial in the real world. + That's the value we add.

? Job Title: Structural Welder ? Pay Rate: $28-$30 per hour (DOE) ? Schedule: Full-Time | 40-50 Hours per Week (including occasional Saturdays) We are seeking an experienced Structural Welder to join our team in Olathe, KS. The ideal candidate will have strong fabrication skills, the ability to read blueprints, and experience working with various metals. This position involves welding, cutting, and assembling structural components to meet project specifications while maintaining top safety and quality standards. Key Responsibilities Weld, cut, and fabricate metal structures according to blueprints and specifications. Work with steel, stainless steel, aluminum, and other metals using MIG, TIG, and Stick welding techniques. Inspect welds and materials to ensure compliance with quality and safety standards. Interpret detailed technical drawings and schematics accurately. Perform welding tasks in shop and field environments as needed. Maintain welding equipment and tools in proper working condition. Follow all company safety policies and OSHA regulations. Collaborate with supervisors, engineers, and team members to meet project deadlines. Qualifications Proven experience as a Structural Welder. OSHA 10 Certification - Required. Welding certifications (AWS, ASME, or equivalent) - Preferred. Proficiency in MIG, TIG, and Stick welding processes. Ability to read and interpret blueprints and technical drawings. Strong attention to detail and quality workmanship. Excellent troubleshooting and problem-solving skills. Ability to work in both indoor and outdoor environments, including various weather conditions. Strong safety awareness and commitment to following established procedures.

PARTS TIG WELDER Tig Welders are responsible for building/fabricating, measuring/cutting and tig welding doors, gates, dividers, windows and many other trailer components. It's a physically active job which requires reading blueprints & diagrams, working at a steady pace and being on your feet all day. Come see us if you have a strong work ethic & want to build the best trailers in the industry! Essential Duties and Responsibilities: Work from blueprints, sketches, drawings, sample parts and written/verbal work instructions to construct and assemble components of trailer assemblies using electric, pneumatic and hand-powered tools, Mig and/or Tig welding equipment Verify conformance of product with the appropriate specifications and standards from work order and drawings Measure, mark, cut and machine parts on machines such as tube bender, bandsaw, plasma torch or other machines Confer and collaborate with other sheeters/welders and/or supervisors to resolve any product or process problems Adhere to and sustain lean manufacturing processes including but not limited to 5-S, Point of Use Storage, Kanban systems, etc. in order to maintain productivity requirements and a clean, safe work area Float to other departments at any time as needed by the Company Follow all policies and procedures as directed by Cimarron Trailers Ensure quality product is completed in a timely manner. Regular attendance is a critical function of this job Perform other duties as requested, directed or assigned. Education and Experience: Experience working in a manufacturing environment Aluminum Mig and/or Tig welding experience Job Knowledge, Skills and Abilities: Must be able to read a tape measure to 1/16's of an inch Capable of welding aluminum parts using a Mig and/or Tig welder Capable of using a plasma torch as well as other tools needed for the job Must possess the ability to work effectively with your team and other teams. Must be familiar with product construction and application and provide quality work at the source. Must be organized, self-motivated, and able to work independently. Must be able to manage multiple tasks and or priorities and easily adapt to changing situations. Must maintain regular work schedule to ensure product flow Physical Demands: Required to stand and move about the facility for prolonged periods of time, including up to an entire 9 hour shift as well as any required overtime. Able to stoop, bend, twist, squat, and kneel during the course of the day Required to be able to use hands and arms to repetitively grip, twist, squeeze and otherwise use tools such as welding guns, plasma torches, pneumatic and electric hand tools and other hand tools throughout the 9 hour shift as well as any required overtime Frequent and repetitive lifting of up to 30 lbs. throughout shift and occasional lifting of items up to 50 lbs. individually throughout the shift. Anything over 50 lbs. is team-lifted. Required to be able to safely and effectively handle necessary tools required to perform the essential functions of the position. Personal Protective Equipment: Safety Glasses Safety Shoes at all times Welding hood with appropriate rated lens for aluminum welding Hearing Protection Work Environment: Combination of typical non air-conditioned plant and outdoor environment. Exposed to any number of elements, extreme heat & cold, working in and out of doors between buildings Exposed to loud noise throughout shift - hearing protection is required for this job Exposed to smoke/fumes from welding operations Will be required to perform other duties as requested, directed or assigned.

TITLE: TIG Welder OPEN POSITIONS: 1 REPORTS TO: Fabrication Foreman Magnum Systems, Inc. is currently seeking a TIG Welder to join our team at our Parsons, KS facility. If you are hardworking, trustworthy, reliable, and can succeed in a physically demanding, fast-paced work environment, we want you as part of our team. Your Partner in End-to-End Manufacturing Solutions Magnum Systems is uniquely positioned as both a highly skilled systems integrator and a manufacturer of customized bulk material handling solutions, including pneumatic conveying and automated packaging. Our dual expertise gives us a distinct advantage when designing and building custom solutions. For example, our in-depth understanding of manufacturers' challenges allows us to identify and prevent potential issues early in the process, enabling us to deliver more effective, tailored outcomes than most system integrators. On February 28, 2025, Magnum Systems, a leading systems integrator and a manufacturer of bulk material handling and packaging solutions, acquired ECS Solutions, an acclaimed, CSIA-certified expert in batch and process control automation, control systems integration, and manufacturing execution systems. With the addition of ECS, Magnum is positioned to deliver more extensive, innovative, end-to-end integrated systems. This acquisition combines over 110 years of industry expertise to provide tailored, turnkey, start-to-finish solutions for our valued customers, significantly increasing their operational efficiency, precision, and scalability for modern and future manufacturing. SUMMARY As a TIG Welder, you will be responsible for performing high-quality welds on various metal components and ensuring the structural integrity and aesthetics of the finished products. ESSENTIAL FUNCTIONS Perform TIG welding operations using appropriate equipment, tools, and techniques to join metal components accurately and securely, according to blueprints, specifications, and welding codes. Select and set up the welding equipment, including TIG welding machines, gas cylinders, torches, filler rods, and other related tools. Read and interpret blueprints, drawings, and specifications to determine welding requirements, dimensions, and tolerances. Prepare workpieces by cleaning, degreasing, and positioning them for welding, ensuring proper fit and alignment. Set welding parameters, such as voltage, amperage, and gas flow, according to the material type, thickness, and desired weld quality. Execute TIG welding operations on a variety of metals, such as stainless steel, aluminum, and titanium, while maintaining strict adherence to safety protocols and quality standards. Monitor the welding process. Inspect the welds for defects, such as cracks, porosity, and distortion, and make necessary adjustments to ensure optimal results. Perform post-welding tasks, including grinding, smoothing, and polishing, to remove sharp edges and achieve a finished appearance. Conduct regular maintenance and inspection of welding equipment. Identify and report any malfunctions or repair needs to the supervisor. Follow safety guidelines and maintain a clean and organized work area to ensure a safe and efficient working environment. Collaborate with team members, including engineers and fabricators, to discuss project requirements, troubleshoot issues, and provide input on welding techniques and processes. QUALIFICATIONS Required: High School Diploma or GED equivalent 2 years of professional welding experience required In-depth knowledge of welding principles, techniques, and best practices, with expertise in TIG welding on various metals a plus. Preferred: 3+ years of experience Valid welding certification, TIG certification preferred SKILLS REQUIREMENTS Proficient in reading and interpreting blueprints, drawings, and specifications. Strong attention to detail and ability to maintain high-quality standards in welding operations. Skilled in operating and maintaining TIG welding equipment and related tools. Ability to assess weld quality and identify and rectify defects. Solid understanding of welding safety procedures and practices. Good communication skills and the ability to collaborate effectively with team members. Physical stamina and dexterity to perform welding tasks for extended periods. High level of professionalism, reliability, and a strong work ethic. OTHER Work Environment Operates in a manufacturing environment. Requires the use of personal protective equipment (such as safety glasses with side shields, safety footwear, hearing protection, etc.) Is subject to both inside and outside environmental conditions. Physical Requirements Lifting, carrying, and/or moving up to 50 lbs.; occasionally over 50 lbs. with assistance. Frequent standing, up to 100%. Occasional squatting and sitting. Ability to use hands and fingers for holding, carrying, grasping, pinching, pulling, pushing; rotating fingers, wrists, hands; manipulation of machine controls, tools, and parts. Ability to identify parts and tools, observe operations of machine, and visually inspect completed parts. Travel Requirements None. Supervisory Requirements None. DISCLAIMER This is not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the and other duties as assigned may be required. Magnum Systems reserves the right to modify this job description at any time. Magnum Systems is a drug and alcohol-free workplace. Magnum Systems is an Equal Opportunity Employer. Reasonable accommodation may be made for employees with disabilities if requested. Applicants must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

We are seeking a SENIOR MIG WELDER/FABRICATOR to join our Weld Team in this customer-focused industry. A successful SENIOR MIG WELDER/FABRICATOR at WEBCO MFG is both Efficient and Precise, meeting customer specifications and expectations by producing high quality welds done efficiently. WEBCO MFG is a growing local business united under one aim: "GIVE THE CUSTOMER WHAT THEY WANT, WHEN THEY WANT IT, & HOW THEY WANT IT". This aim extends not only to our external customers, but also to our internal ones. We don't over hire or over staff and pride ourselves on being Home Grown & Employee Owned. Come grow with us and enjoy…. * Air Conditioned and Professional Work Environment Built for Craftsman * ESOP - Employee Stock Ownership Plan * Quarterly Bonus Potential * Best in Class Benefits Package * Employee Referral Program * Flexible Scheduling * OT Opportunities Readily Available * Safety First Culture Job duties: * Produce high quality welds efficiently. * Ensure materials meet customer specifications by determining the welding method to be used if it is not stated on the blueprint. * Ensure parts are welded correctly by performing the first piece check and submitting it to quality assurance for inspection prior to completing the entire job. * Ensure production of the correct number of parts by maintaining records on production * Ensure efficient and timely processing of various job orders by organizing work to be performed according to complexity, method used, anticipated completion time, etc. * Other responsibilities as required. Skills/Requirements: * 3+ YEARS MIG Welding/Fabricator experience * Ability to read and interpret blueprints and welding symbols * Comfortable with flat, horizontal, and vertical uphill welds * Can weld mild, stainless, and galvannealed steel * Strong attention to detail and efficiency About us: WEBCO MFG was founded more than 40 years ago and is now a proud Employee-Owned Company with more than 150 associates (co-owners). Over the years, we've earned an outstanding record for quality and delivery performance, serving OEMs in many rugged, high demand industries. This growth has led to us being one of the only local manufacturers with a Fully Air-Conditioned Work Environment. Check us out Here: *************** Job Type: Full-time Pay: $22.00 - $27.00 per hour Expected hours: 40 - 50 per week Benefits: * 401(k) * Dental insurance * Flexible schedule * Health insurance * Life insurance * Paid time off * Professional development assistance * Referral program * Retirement plan * Tuition reimbursement * Vision insurance Ability to Commute: * Olathe, KS 66062 (Required) Ability to Relocate: * Olathe, KS 66062: Relocate before starting work (Required) Work Location: In person

Perform manual and semi-automatic welding on all types of materials, components, and products. Main Duties/Responsibilities: Setup, adjust, and operate all types of manual and semi-automatic welding equipment (i.e. SMAW, GMAW, FCAW, Bortech) in accordance with the proper Welding Procedure Specification (WPS) in an efficient manner. Provide technical support for Sales during the inquiry process. Ensure welding is being done such that welds are capable of passing RT and UT requirements. Verify welding and material is in accordance with drawings, standards, and specifications. Perform pre-heat and post-heat operations. Perform all types of gouging operations. Maintain accurate welding and material records. Clean up welds by grinding, buffing, and/or other means to provide an acceptable surface condition. Assist and train other welders, as required. Report abnormal conditions of equipment to Foreman. Work in a safe and secure manner and comply with the safety rules and procedures. Weld fixtures, temporary lugs, dies, and other non-production items in accordance with the proper WPS. Perform small repairs and preventative maintenance on the welding equipment. Assist in placing and removing pieces, components, and products to/from the welding area. Operate jib cranes, forklifts, and other mobile equipment (except heavy cranes) for the moving of material, components, and equipment from location to location within the plant. Occasionally operate overhead cranes and towmotors in support of small moves to continue production within the department. Perform general laborer duties as required (i.e. grinding, loading and unloading of trucks and railcars, bricking furnace). Keep working area clean and perform housekeeping duties around the plant as required (i.e. pickup tools, roll-up hoses and cables, sweep). EOE/Veterans/Disabled OBSERVE ALL SAFETY PRACTICES The above statements are intended to describe the general nature and level of the work being performed by the people holding this position and shall not be construed as a detailed description

Production Welder B - 2nd shift(Job Number: 336521) Textron Aviation has been inspiring the journey of flight for nine decades through the iconic and beloved Cessna and Beechcraft brands. We are passionate advocates of aviation, empowering people with the freedom of flight. As you join our legacy as a global leader in private aviation, you'll have opportunities to try new fields, expand your skills and knowledge, stretch your abilities, and build your career. We provide a competitive and extensive total rewards package that includes pay and innovative benefits to support you and your family members - now and in the future, beginning day one. Your success is our success.Description We are hiring immediately for a Production WelderWhat you will be doing as a Production Welder:In this role, you can expect to perform a variety of production welding operations on different metal parts, ensuring smooth and fully penetrated welds. You'll also have the opportunity to assist both higher and lower grade Welders, enhancing your skills and experience. Join us to be part of a dynamic team creating the future of flight.Your responsibilities may include (but are not limited to):Welding Operations: Perform fusion welding processes (solder, tungsten inert gas (TIG), spot, seam, orbital) on various metal alloys, including carbon steel, stainless steel, Inconel, magnesium, and titanium Equipment Setup: Set up parts and operate welding equipment, input sequence of events in work center console, and improvise holding and locating devices Material Preparation: Clean, form, and position parts, tubes, and assemblies; determine welding sequence to minimize internal stress and defects Finishing and Testing: Grind and smooth welded parts to appearance specifications, perform leak tests on welded parts and assemblies Assembly and Adjustment: Check, join, straighten, or hand form detail and welded assemblies; operate power machines like band saws, drill presses, and sandblasting equipment Heating and Quenching: Select proper heating coil and holding fixtures, adjust time cycle and voltage, regulate coolant flow, prepare quenching media, and apply flux and solder rings What you need to be successful:• A high school diploma, an equivalent certificate, or a bronze level WorkKeys certification is required• Must be able to obtain 3 tig weld certifications (of your choosing and with supervision approval) within a period of 9 months of entering this classification. Certification choices include:AluminumStainless SteelTitaniumSteelInconel• Must be able to pass written welding exam and annual eye exam• Ability to work in working conditions exposed to sparks, fumes, heat, and other shop floor related environment Why join us? Your success is our success. We provide a competitive and extensive total rewards package that includes pay and innovative benefits to help you and your family members - now and in the future, beginning day one. • 401K company match + additional annual contribution equal to 4% of eligible compensation • $3,000 annual lump sum payment eligibility per contract • Annual cost of living adjustment up to $1,500 per contract• Automatic increases of $0.30/hr every 3 months up to top of grade per contract• Education assistance for undergraduate, graduate, and certificate programs, compensated at the start of the semester • Flight training bonus program for earning pilot certifications • Access to the onsite Textron Aviation Plane Wellness Center and Pharmacy • Explore more benefits here At Textron Aviation, base pay is only one of the parts of our Total Rewards package and is determined within a range. This provides you the opportunities to grow and develop within your role, and depends on your experience, qualifications, and location.Textron Aviation Inc. must comply with U.S export control laws and regulations. If a position requires access to sensitive information controlled under these laws and regulations, a successful applicant must be eligible to meet any requirements to access controlled information. Qualifications Our workforce is made up of individuals throughout the world with a wide range of backgrounds, interests, and passions. Our unique perspectives lead us to be a world-class workforce, helping us develop legendary products. Because we recognize that our differences make us stronger, and studies have shown that some may be less likely to apply unless they match the job description exactly, we welcome you to apply to this role if it meets your career goals. You could be our next great fit! We're Here to Support You: We understand the hiring process can be overwhelming which is why our team is committed to assisting you at each stage. If you have questions, visit the Career & Learning Center located in Wichita, Kansas where you'll find answers and additional resources as you explore your career opportunities with us. Kansas Tax CreditJoin Textron Aviation's Kansas team and you may be eligible for a $5,000 state of Kansas Aviation tax credit for up to five years. Visit *********************************************** for more information on the tax credit. EEO StatementTextron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex (including pregnancy and sexual orientation), genetic information or any other characteristic protected by law. Recruiting Company: Textron AviationPrimary Location: US-Kansas-WichitaSchedule: Full-time Job Level: Individual ContributorShift: Second ShiftJob Posting: 12/03/2025, 2:01:19 PM

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Temp Welding Fabricating 1/8" to 1" steel Skills/Requirements: The ideal candidate will have at least 2 years of MIG and SMAW Ability to work within deadlines, follow verbal instructions, and work both independently or with a team Great attention to detail and thorough inspection of work Individuals must be reliable and punctual Must pass a pre-employment drug screen and background check About Performance Personnel: Performance Personnel is a data-driven, people-focused staffing and recruitment company with hundreds of jobs available daily. Take the work out of finding work! Our skilled recruiters will partner with you to find the best opportunities. We offer an array of services to help our employees maximize their professional development. Benefits available. Please contact us at any time - we're happy to help!

Job Details Experienced Ottawa-Shop - Ottawa, KS Full Time Not Specified None Any Skilled Labor - TradesDescription Employee Value Proposition Working for a world-class leader in building structures, a Schuff Steel Production Fitter-Welder brings his/her expertise and knowledge in steel and/or bridge fabrication to build some of the most complex and high profile projects in the commercial building, bridge, and industrial sectors. Critical to the production process this position assembles and fits drawing dimensions of the various structural, plate, and mechanical materials. Welds a large variety of materials. Welds in all positions with a high degree of proficiency utilizing full skills of the trade including knowledge of common heat reactions of structural metals, and are certifiable. The production fitter utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge of blueprints and common heat reactions of structural metals. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career. Core Responsibilities Follows applicable welding procedures (AWS, AISC) Welds on the ground level, above ground and below ground, in any required position. Chips peens and grinds material to prepare for welding or finish. Welds structural materials such as plates, sheets, girders, tanks, etc., occasionally involving uncommon structural metals or machine metals under close tolerances of heat application and workmanship. Straightens materials by heat or flame. Perform gouging and scarfing as needed. Must take and pass welding test in accordance to AWS D1.1. Receives instructions, prints, sketches and work orders. Reads and interprets blueprints and plans the fitting operation. Directs and assists in handling and spreading of material, assembling material into required relationships according to detail drawings; handling and placing detail material in assembly, placing bolts, drift pins and other fastening deceives in proper locations. Lays out work lines or fits up jigs for positioning material when required; checks, squares, and scribes all detail connections. Responsible for work conforming to drawings and notes thereon. Cleans up material by grinding or chipping. Burns and tack welds for assembly purposes. Burns, copes, bevels and straightens material. Does minor layout. Spot paints for identification marks. Moves material to and from the work area. Moves welding equipment to material when necessary. Positions component parts on a table held by a fixture or jib, tacking when required. Maintain clean and organized work area. Perform other routine duties per management direction. Must adhere to and follow all safety rules and PPE requirements Education/Training - Work Experience High school diploma or general education degree (GED), and/or 12 months of stable work experience. Must pass required weld test and fitter test. Specialized Knowledge - Certificates & Licenses Equipment Knowledge & Skills - use a variety of hand tools and welding equipment Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and blueprints. Mathematical Skills: Ability to add, subtract, multiply and divide into all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Cert in AWS D1.1 weld test DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

RESPONSIBILITIES : Essential Functions- Teach Welding Technology classes in Pratt, Kansas. (May be asked to assist at other locations.) Willingness to accept a course schedule that may vary from semester to semester. Advise current and prospective students in appropriate curricula. Assist in selecting textbooks, developing curricula, completing reports, and tracking and entering assessment data. Plan and implement appropriate activities to supplement instruction. Provide assessment and evaluation of student performance. Provide adequate laboratory supervision whenever students are working. Plan, revise, and update curricula, as well as grade and assess student learning. Maintain skills in teaching methods and course development as recommended by Pratt Community College. Maintain an inventory of equipment. Maintain and repair lab equipment while keeping shop in professional working appearance. Participate, as possible and appropriate, in faculty development activities at the college and with state and regional organizations. Maintain, plan, and schedule advisory committee meetings. Maintain records and files as requested by the department and/or Vice President of Instruction. Assist with and maintain National Accreditation, American Welding Society (AWS), and any other professional certification. Arrive on time for work, attend work regularly, and successfully complete the responsibilities of the position. Comply with Pratt Community College policies, procedures, and practices. Promote Pratt Community College. Secondary Functions- Work closely with faculty within the Technical department. Work closely with personnel in admissions and student services. Work closely with high schools in our service area. QUALIFICATIONS : A.A.S. or higher degree in Welding preferred. 2 years (minimum) industry experience required. American Welding Society (AWS) certified welder (CW) Certified Welding Educator (CWE) credential(s) preferred; must be willing to work toward both credentials. Ability and interest in teaching required. Teaching experience preferred. Ability to work cooperatively with college and high school instructors Ability and willingness to teach via alternative delivery systems including online and/or other distance education modes Ability to establish and maintain effective professional relationships with staff, students, faculty, and other Pratt Community College stakeholders Ability to plan, revise, and update curricula Ability to communicate effectively with individuals from diverse ethnic, racial, socioeconomic, gender and disabilities populations Ability to maintain confidentiality in a student-centered environment Physical requirements include excellent written, verbal, and listening communication skills; the ability to understand words and respond effectively and appropriately; visual acuity to view a computer terminal. The ability to learn and comprehend basic instructions about the position and its responsibilities is essential. The qualifications listed are guidelines for selection purposes; alternative qualifications may be substituted if sufficient to perform the duties. WORK CONDITIONS: Classroom and welding shop environments. Some travel within service area. SALARY and STATUS : The salary is commensurate with qualifications as determined by the Master Agreement Salary Schedule. This full-time faculty position is 9-month annual, due process rights eligible, benefit eligible, and exempt. APPLICATION : For full consideration, apply online at ******************************************************** send completed PCC employment application, resume, and copies of transcripts to the Director of Human Resources, Pratt Community College, 348 NE S.R. 61, Pratt, KS 67124. ************. AA/EOE Transcripts - The hired candidate will be required to submit official, non-issued to student, transcripts. Start date: August 2025 PRATT COMMUNITY COLLEGE does not discriminate on the basis of race, color, national origin, sex, disability, age or veteran status in its programs and activities. Complete notice can be found at: ************************* Pratt Community College reserves the right to revise or change job responsibilities as the need occurs. This job description does not constitute a written or implied contract of employment; rather, it is a clarification of the responsibilities of the position. This position description Additional Information For more information regarding this position, please visit: ******************************************************** PCC offers an excellent benefit package. Send completed PCC employment application to Director of Human Resources, Pratt Community College, 348 NE S.R. 61, Pratt, KS 67124. ************. Visit our web site ******************************************************* to apply online or download application. AA/EOE

Operates Tig and Mig welders; ensures quality of all welds; maintains a safe working environment; contributes to team effort PRIMARY OBJECTIVES AND RESPONSIBILITIES Facilitates the fusing of production materials by Tig and Mig welding mild steel, aluminum, and stainless steel; understanding various weld form symbols on blueprints and understanding size of fillet forms; welding both vertical and horizontal plane geometry; understanding various edge preps before welding; Ensures the quality of all welds by using and maintaining the proper equipment for each weld; examining work pieces for defects and measuring work piece with straightedge, tape measure, or template to ensure conformance with specifications; adhering to ISO and FDA regulations Maintains a safe working environment by attending safety training; cleaning and maintaining a clean work area Accomplish company and organizational mission by contributing to team effort and handling other duties as assigned assisting in the overall success of the company. QUALIFICATIONS Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent. Detail oriented Manual dexterity required for operating machinery and computers. Ability to lift up to 40 pounds required. Possesses solid working knowledge of subject matter. Ability to become qualified to perform Lock‐Out/Tag‐Out procedures. Ability to stand for long periods of time; up to 80% of day. KNOWLEDGE, SKILLS, AND ABILITIES High School Diploma or equivalent required; 2‐4 years of experience required DISCLAIMER This job description in no way states or implies that these are the only duties to be performed by the employee in this position. It is not intended to give all details or a step-by-step account of the way each procedure or task is performed. The incumbent is expected to perform other duties necessary for the effective operation of the department and the company. It is the policy of Agiliti to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender identity, sex, sexual orientation, national origin, age, physical or mental disability, genetic information, marital status, status as a veteran, military service, or any other characteristic protected by applicable federal, state, or local civil rights laws. In addition, Agiliti will provide reasonable accommodations for qualified individuals with disabilities. Agiliti strictly prohibits any form of retaliation against individuals who make good faith reports of alleged violations of this policy or who cooperate in Agiliti's investigation of such reports. Affirmative Action Policy Statements You may be required to obtain certain vaccinations, or provide proof of current vaccination status, based on customer and/or company requirements. If vaccination is required, Agiliti will provide specific directions and cover the expense at a participating clinic. Please note, this includes the COVID-19 vaccination. Agiliti offers a robust suite of benefits for regular, full-time, non-union employees including: health insurance options for Medical, Dental & Vision plans, Short- and Long-Term Disability plans, Flexible Spending Accounts, Health Savings Accounts, Life Insurance Options, Paid Time Off, 401K Saving Plan with employer match, Employee Discounts, Tuition Reimbursement, Daily Pay program, Employee Assistance Program, and wellness programs. Agiliti is an equal opportunity employer and provides reasonable accommodations to employees and applicants consistent with state and federal law. If you require assistance with your application, please contact ****************************. Primary Job Location:Hays KS BranchAdditional Locations (if applicable):Job Title:Welding Technician ICompany: Agiliti Location City:HaysLocation State:Kansas

Shift: 1st | Monday-Friday, 7:00 AM-3:30 PM Pay: $21/hour to start | Weekly Pay | Overtime Available Build your career with a company that invests in you. Inova Staffing is hiring TIG Welders for a growing manufacturing team in Edwardsville. This position is perfect for individuals who enjoy hands-on work and want to be part of a positive, supportive environment where teamwork and growth are top priorities. Key Responsibilities Assist with assembly, manufacturing, and material handling tasks Operate basic hand tools and welding equipment safely Maintain a clean, safe, and team-ready workspace Follow instructions, meet production goals, and support team success Qualifications High school diploma or equivalent preferred Ability to lift up to 60 lbs and stand for extended periods Dependable, motivated, and committed to great attendance Ability to pass a weld test Previous manufacturing or warehouse experience is a plus Why You'll Love Working Here Positive, team-oriented culture Supportive leadership that encourages learning and advancement Competitive weekly pay with overtime available Stable Monday-Friday schedule - no weekends Ongoing training and real opportunities for career growth Benefits After Probationary Period 401(k) with company match Medical, dental, and vision insurance 9 paid holidays Paid time off (PTO) Apply today at www.inovastaffing.com Inova Staffing is an Equal Opportunity Employer. #GA

The Fitter/Welder works with little or no instruction to perform a variety of welding processes and methods to weld all types of metals and alloys of various shapes, sizes, and thicknesses as needed for projects. Duties and Responsibilities: * Use a variety of welding processes and methods to weld all types of metals to perform complete part fabrication in compliance with company quality standards. * Complete fit-up of structure, pipe, accessories and tanks. * Welds in flat, horizontal, and vertical positions. * Identify various metals and alloys such as mild & high strength steel, aluminum, and stainless as well as identify structural shapes. * Use measuring devices and gauges to determine thickness and size of metal. * Use oxygen/acetylene torch for cutting metals. * Use grinder and other hand or power tools required to grind, bevel, or fit metals together, and remove slag. * Read and follow blue prints to determine structure or fit of parts that are being welded and are in compliance with the Method of Production Standard. * Maintain work area and equipment in a clean orderly condition and follow prescribed safety procedures. Skills and Specifications: * Proficient knowledge of welding procedures, practices, symbols, and techniques required to weld and/or fuse metals together. * Skilled ability to use hand and power tools associated with welding, such as chipping hammer, grinder, arc welder, and oxygen/acetylene torch including setup or connection of hoses, cords, and regulators. * Accomplished ability to read and comprehend blue prints and/or sketches. * Knowledge and ability to use common measuring instruments and hand tools such as tape measure, level, square, file or rasp. * Demonstrated leadership skills. * Solid problem-solving skills. * Ability to contribute and work in a team environment. * Ability to demonstrate accuracy and thoroughness to ensure first quality of work. * Ability to establish and maintain healthy working relationships with people in course of work. * Willingness to work additional hours in order to meet tight deadlines. Education and Qualifications: * High School diploma or equivalent (GED). * Certification from a trade or welding institute is preferred. * Must demonstrate welding proficiencies through Visual & Fillet break or Radiography testing and be able to successfully perform Flux Core, Sub Arc, Tungsten Inert Gas or Gas Metal Arc welds in 1 through 6 Groove positions as well as welds in the 1 through 2 Fillet positions.

Job Description We are growing! - Come be part of our story! We are looking for a highly talented welder to join our dynamic team! We're seeking a hardworking professional who likes meeting challenges and surpassing client expectations. We are seeking a TIG Welder to complete our welding department. This is a full time position, working in a clean and collaborative manufacturing environment. Responsibilities: Weld metal parts together using blueprints, layouts and sketches provided by Engineering department Will layout metal, set-up, and tack in accordance with welding blueprints, etc before welding Ability to fit pipe and weld flanges Use fixtures, jigs, clamps, and other positioning devices commonly used in welding Use various power and hand tools as required to complete production welding tasks Perform user maintenance on all machines and equipment Maintains a neat, clean, orderly, and functional work area at all times Checks work area for compliance of all safety rules and standards. Reports any unsafe or uncompliant issues to Team Lead or Operations Manager in a timely manner Other duties as assigned Requirements: High School Diploma or equivalent. Welding certification/experience desirable Ability to perform Tig welding tasks Heli-Arc weld experience is a plus Ability to read blueprints, technical layouts/sketches Ability to follow verbal or written instructions Knowledge and experience using both manual and power hand tools Ability to use manual arc, wire and mig welders. Familiar with fixtures, jigs, clamps and other positioning devices Must be detail oriented Ability to work in a fast- paced environment Ability to work overtime if required Familiar with working in a warehouse/manufacturing environment Benefits Health/Dental/Vision/HSA Life/STD/LTD 401(k) with matching Parental Leave Vacation and quarterly PTO days Profit Sharing Any offer is contingent based upon the successful completion of a background investigation, a mandatory pre-employment drug test (we will arrange for you), and your ability to comply with federal law requiring you to show proof of your ability to work in the United States on your first day of employment.