Welder jobs in Key Largo, FL - 336 jobs

Night Shift starting at $19.82! 48-Hour Work Week Monday- Thursday 4:30 pm - 4:30 am Overtime available Double Time After 50 hrs. Worked! *Train on 1st Shift (5am-4:30pm) At Veritas Steel, were leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? Join the Veritas Steel team today! Welders employed at Veritas Steel's Palatka location are responsible for performing FCAW & SMAW processes to codes, and standards, including repairs and miscellaneous tasks as assigned by Shop Supervisor. They must be able to meet high production demands in a timely manner and complete high-quality work with expertise. Welders must also adhere to company policies to ensure a safe working environment. Principle Duties and Responsibilities: Uses proper safety equipment to ensure surfaces are adequately prepared for all operations: Air arc, Grove Welds, Flex Core, Full Pin Using correct procedures to obtain proper weld profile, etc., Understands general knowledge of welding codes and welding tools Proper preparation, cleaning, and setup Hand torch setup and use Understand basic weld symbols/gauges Maintains shop, equipment, tools, vehicles, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety Coordinates with shop supervisor and other personnel for the purpose of completing projects/work orders efficiently, on time, and with no defects Adheres to safety policies to ensure a safe working environment for oneself and surrounding coworkers Knowledge, Skills, & Abilities: High School diploma or GED Must be able to read, write, and comprehend English Need to be able to read metric tapes Able to adapt to work priorities, communicate well, meet deadlines and schedules, and work as part of a team Commitment to work safety and actively participating in our safety culture Commitment to attendance policy and procedures Quality, accuracy, thoroughness, and reliability of work performed Willingness to learn and contribute to the success of your team Welding experience is preferred but not required Physical Requirements: Able to lift 40 pounds and carry 30 pounds Must be able to push /move objects up to 50 pounds of force Pulling requirements up to 122 pounds of force Necessary to stand, walk, stoop, and kneel up to 99% of the shift Must have a good range of motion when reaching forward, shoulder to overhead, and bending Agile fingers and thumbs on both hands Working Conditions: Work is performed indoors in a large warehouse or outside in all weather conditions There is regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel & other possible hazardous conditions Safety glasses, hearing protection, hard hats, and steel-toed boots are required; a respirator is required for specific operations Compensation details: 18.72-22.16 Hourly Wage PIdedfb5a09e17-31181-39200127

Come join an industry leader! Bellingham Marine is seeking an Aluminum Tig Welder for its Drystack Division located in Jacksonville, FL. Enjoy a competitive wages, profit sharing, generous PTO and holiday schedule, 401k with employer contribution, and a full suite of health care benefits. You'll work in a team-oriented environment that puts safety first, including Covid-19 protocols. SUMMARY: Lays out, fits, and welds steel and aluminum components to assemble structural forms such as triangle frames, rectangle frames, pile frames, columns, struts, and other building parts by performing the following duties. Dependability for work schedule is crucial. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Able to read a tape measure competently. * Reads and interprets prints. * Welds s Aluminum with the tig or mig spool gun process. * Able to weld in the 3,4, and 6g positions. * Fabs then welds gangways/ weldments according to a print * Verifies product conformance using blueprints and other means. * Calculates figures such as angles and degrees. * Operates small hand tools, such as grinders, drills, and radial saws. * Bolts, clamps, and tack-welds parts to secure in position for welding; * Sets up equipment and welds parts, using arc, gas-shielded arc, or gas welding equipment; * Assembles parts by welding, bolting and riveting; * Repairs products by dismantling, cleaning, straightening, reshaping, and reassembling parts; * Operates forklift; * Operates tools and equipment in strict accordance with company safety policies; and * Other duties as assigned.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

This position is an instructional position with duties and responsibilities which are established in accordance with State Board of Education Rules and Board of Trustee policies. Teaching assignments will focus welding practices to include gas and electric welding. This position reports to the Director of Workforce Development and Continuing Education. All instructors are responsible for utilizing the College's learning management system as all College courses are at a minimum technology enhanced. Essential Job Duties: * Plans, organizes, and instructs assigned courses to promote studentsuccess. * Responsible for evaluating student learning and objective achievement and providingfeedback. * Selects appropriate materials and equipment for discipline or program use and ensures proper care andsafety. * Adheres to and enforces the administrative policies and procedures of the College. * Assists in implementing College policies, objectives, and functions in accordance with the College Mission Statement. * Responsible for keeping current in the discipline or program areastaught. * Assist in College recruitment and retention efforts, as appropriate. * Other related duties as assigned. Knowledge, Skills, and Abilities: * Ability to perform welding practices to industry standards to ensure safety of staff, students, facilities, and equipment. * Knowledge and ability in these specific areas: Oxy-Acetylene cutting, welding and brazing, Carbon Arc cutting, blueprint reading for welders, metallurgy, metal fabrication, and the following welding techniques: SMAW, GMAW, GTAW, PAC, FCAW, and metal corrosion. * Strong knowledge of welding safety standards and practices. * Experience in instructing students of varying skill levels. * Understanding of, and commitment to, Equal Access/Equal Opportunity. * Ability to communicate effectively, both verbally and inwriting. * Knowledge of College mission, policies, procedures, and services. * Proficient in the use of technology. Education and Qualifications: * High Schol diploma or equivalent required. * Postsecondary training or certification in welding technology or a related field. * Three (3) years' teaching experience is preferred. * Three (3) years' work experience in field is preferred. (A comparable amount of training, education or experience may be substituted for the above minimum qualifications) Licenses, Certifications or Registrations: * A current AWS (American Welding Society) Certified Welder Certification is preferred. * Certifications in any of the following preferred: Oxy-Acetylene cutting, welding and brazing, carbon arc cutting, blueprint reading for welders, metallurgy, metal fabrication, and the following welding techniques: SMAW, GMAW, GTAW, PAC, FCAW, metal corrosion, CRAW, are preferred. Please submit all materials online. Contact the Office of Talent Acquisition, Development, and Accountability at ********** or ************** if you need assistance. Employment Consideration Requirement: Completed CFK application, cover letter, resume, and post-secondary transcripts as applicable (unofficial and/or copies are acceptable, but must provide official transcripts within 30 days of employment). Please Note: Transcripts from non-U.S. colleges and universities will require a U.S. academic equivalency evaluation from a credential evaluation service recognized by the U.S. Department of Education. Please visit ********************** or ********************** for more information. E-Verify Notice of Participation: This employer participates in E-Verify. If you accept an offer of employment, this employer will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. For more information, please visit E-Verify. Notice of Non-Discrimination: The College of the Florida Keys does not discriminate on the basis of race, color, national origin, ethnicity, age, sex (including sexual orientation and gender identity), marital status, military status, protected veteran status, genetic information, religion, pregnancy, or disability in its programs, activities, or employment practices. The following persons have been designated to handle inquiries and grievances regarding the non-discrimination policies: * Civil Rights Compliance Officer: Promise Clark-Kimbio, Manager, Office of Talent Acquisition, Development and Accountability, ************** or *************************** * Title IX Coordinator: Jessica Losardo, Director, Advancement, ************** or *********************** * Disability Services: Nicole Gerrard, Executive Director, Student Success Services, ************** or ********************** Mailing Address: The College of the Florida Keys, 5901 College Road, Key West, FL 33040 State Complaint Process: Federal regulations and State laws require that public colleges in The Florida College System have processes for students, employees, and applicants to file complaints against any respective college. In almost every situation, the college's process for resolving complaints must be followed first. Before contacting the State Division of Florida Colleges, please read CFK's policies and procedures for filing complaints. For more information on filing a complaint with the State Division of Florida Colleges, please visit FCS Concerns and Complaints Process.

Build an Aviation Career You're Proud Of Build your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Welder, you'll operate metal fabrication equipment such as gas tungsten arc (GTAW), gas metal arc (GMAW), flux-cored arc (FAW), plasma arc (PAW), shielded metal arc (SMAW), and resistance welding. What you'll do: * Produce a variety of parts from shop drawings to conform to specifications * Read and interpret blueprints or welding process specifications * Operate brazing and soldering equipment * Operate metal shaping machines such as brakes, shears, and other metal straightening and bending machines * Participate in continuous improvement of processes * Cross train in other complementary skills to support production requirements * Observe all applicable safety requirements Position Requirements: * At least 6-12 months of experience reading, understanding, and interpreting blueprints and basic welding process specifications under supervision * Minimum 6 months of hands-on exposure to basic tool fabrication methods and standard shop processes, including measuring, cutting, and fitting parts to specification * 3-6 months of experience using production tracking or inventory control systems to log work orders, time, and materials accurately * Ability to lift up to 50 pounds (unassisted) Preferred Characteristics: * Working knowledge of related company instructions, company processes, reworks process instructions, original equipment manufacturer manuals and MSDS labels * Completion of a welding apprenticeship program; or equivalent * Attainment of trade certification * Attainment of applicable welding ticket(s) * Well organized with attention to detail * Strong interpersonal skills * Ability to think outside the box when solving problems Benefits that make life better: * Comprehensive Healthcare * 401(k) with 100% company match; up to 5% vested * Paid Time Off starting on day one * Bonus opportunities * Health- & Dependent Care Flexible Spending Accounts * Short- & Long-Term Disability * Life & AD&D Insurance * Learning & Training opportunities #LI-KC1

Principle Responsibilities Skilled in general mechanical abilities. Must be able to read blueprints; layout to tight tolerances. Must be able to weld 6G and pass an Xray quality proficiency test. Using arc welders, gas welders, and gas torches, welds together metal components and alloys such as pipelines, boilers for a variety of complex precision assemblies. Involves a considerable amount of welding to high strength and pressure requirements. Joins together components of fabricated sheet metal assemblies; cut, trim, or scarf metal objects to dimensions, as specified by layout, work orders, or blueprints. Requirements High school degree or equivalent education/experience plus three years trade related experience preferred. Certification required. Capabilities Ability to read and interpret blueprints, manuals. Physical Requirements Standing, bending, stooping, lifting up to 70 lbs. Equipment to be Used Arc welders, gas welders, gas torches. Note Duties and skills required for this position are general and describe the principal functions, level of knowledge and skills required of this job. You should not consider it an all-inclusive listing of work requirements. You may be asked to perform other duties as assigned, including work in other functional areas. Willingness to contribute in such a manner is taken into consideration in job candidacy, transfer, and performance appraisal. The Precision Companies are committed to providing: An environment that encourages all employees to make full use of their talents Equitable compensation Good working conditions Opportunity for personal development Precision Companies is an Equal Opportunity employer committed to workplace diversity. All applicants will be considered with equal opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected characteristics. Precision Companies participates in the E-Verify program as required by law. Precision Companies is dedicated to working with and providing reasonable accommodation to applicants and employees with physical and mental disabilities. Precision Companies is a drug-free workplace. Job Type: Full-time Job Type: Full-time Pay: $28.00 - $34.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Professional development assistance Tuition reimbursement Shift: 8 hour shift Ability to Commute: Cocoa, FL 32926 (Preferred) Ability to Relocate: Cocoa, FL 32926: Relocate before starting work (Preferred) Work Location: In person

Our client is looking for First Class Welders to work at their Jacksonville facility. This is a full-time temp to hire position. Hours: Days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Summary/Objective Capable of performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. Willingness to cross train for multi-function structural and piping assembly processes Essential Functions Fluent in understanding job specific WPS / PQR's and capable of setting machine up for performance in all positions to certified testing criteria. Analyze blueprints for welding insignia and the application thereof to assembly components on piping and structural systems. The ability to identify correctly, measure, hand dress, cut and fit prepare metal surfaces for welding process to be completed per job specific requirements. Capable of visual observation of pre- and post-welded surfaces; and the interpretation of fulfilled job requirements with micrometer, caliper, and other precision measuring instruments. Technically proficient in the interpretation of insufficient weld criteria and knowledge to efficiently blend to repair. Strong mechanical aptitude and problem solver who can understand and follow instruction. Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations. Operate overhead cranes and or forklifts. Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Competencies Collaboration Skills Reliable Attendance Decision Making Leadership Communication proficiency written and verbal Ethical Conduct. Problem Solving Organizational Skills Thoroughness Time Management Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Required Education and Experience Basic math and language skills required. Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting. Related experience or training. Preferred Education and Experience 6+ Years' experience in Welding SMAW, FCAW and GTAW, or a combination. 2 years vocational technical training. Additional Eligibility Qualifications Must have dependable transportation, valid driver's license, clean back-ground check and random drug screening consent. Job Type: Full-time Pay: $22.00 - $28.00 per hour Shift: 8-hour shift Day shift Application Question(s): Are you willing to take a drug test? Do you have a clean background, and can we run a background check? Experience: Precision measuring instruments: 6 years (Required) ISO 9001: 3 years (Required) TIG welding: 6 years (Required) Stick welding: 6 years (Required) License/Certification: Driver's License (Required) Ability to Relocate: Jacksonville, FL: Relocate before starting work (Required) Work Location: In person

Working Title: OPS ALUMINUM WELDER - 42902825 Pay Plan: Temp 42902825 Salary: $18.00 Hourly Total Compensation Estimator Tool OPS ALUMINUM WELDER FLORIDA DEPARTMENT OF AGRICULTURE AND CONSUMER SERVICES FLORIDA FOREST SERVICE * OPEN COMPETITIVE OPPORTUNITY -- THIS IS A FULL-TIME OTHER PERSONAL SERVICES (OPS) POSITION* CONTACT: Karen Mathis, ************** MINIMUM REQUIREMENTS: One (1) year of aluminum and/or steel welding or mechanical installation experience. Vocational/technical training in welding can substitute at the rate of 720 classroom hours for the required experience provided such training includes MIG welding, Arc welding or TIG welding. Requires possession of a valid Class E driver license. * ATTENTION CANDIDATES* To be considered for a position with the Florida Department of Agriculture and Consumer Services: * All fields in the Candidate Profile must be completed (an attached resume is not a substitution for the information required on the candidate profile). * Work history, duties and responsibilities, hours worked, supervisor, and formal education fields, etc. must be filled out to determine qualifications for this position. * Responses to Qualifying Questions must be verifiable in the Candidate Profile. The Florida Department of Agriculture and Consumer Services values and supports employment of individuals with disabilities. Qualified individuals with disabilities are encouraged to apply. ADDITIONAL REQUIREMENTS: Occasional to moderate travel required. Position may respond to emergencies, including natural disasters or other type incidents requiring travel, as needed. NOTES: To maintain fairness and integrity in our hiring process, the use of Artificial Intelligence (AI) tools to answer qualifying questions or participate in interviews is strictly prohibited. Applicants must provide their own, authentic responses during all stages of the evaluation and recruitment process. Any candidate found using AI to assist in their answers will be disqualified from consideration. The anticipated hiring salary for this position is $18.00 hourly. JOB DUTIES: * Preheats and cleans aluminum, cuts, and fits component parts of manufacturing jobs in preparation for welding. * Performs the duties of cutting aluminum tubing and welding various types of sign structures and any other aluminum manufacturing jobs. * Fabricates special safety devices for construction and maintenance equipment. * Manufactures items such as eye bolts, braces, angle brackets, and similar items. * Assists in loading completed sign structures and unloading and placing shipments of incoming aluminum in racks. * Maintains and makes minor repairs to welding equipment. * Performs related work as required. * Weld steel, if required * Assist in outfitting of new equipment (IE: installing wires, harness, lights, pumps, toolboxes, hoses, hose reels, light bars, back racks, water tanks. * Heavy equipment experience * Operation of metal cutting/fabrication machines, drill presses, saws, punches, etc. * Operates and maintains other equipment for state lands management purposes such as road graders, dump trucks, loaders, etc. * Performs maintenance and construction activities on fixed facilities and equipment. Makes purchases of materials as needed. * Performs other related work as assigned. The Benefits of Working for the State of Florida Working for the State of Florida as an OPS employee is more than just a paycheck. * Participation in state group insurance (must meet eligibility requirements*); * Participation in the Florida Deferred Compensation Plan (457b). For additional details and online enrollment visit MyFloridaDeferredComp.com; * State of Florida 401(a) FICA Alternative Plan (tax deferred Retirement Savings Plan). For more information visit Social Security Alternative Plan (aigrs.com) and read OPS Social Security Alternative Plan (Does not apply to previous FRS Retirees); * Flexible Spending Accounts; For a more benefits information, visit ***************************** * Employee Assistance Program (EAP). * Seasonal and part-time OPS employees (less than 30 hours average per week) refer to People First at ************ or go to: ************************************************************************************** SPECIAL NOTES: The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. Location:

Are you looking to join Florida's fastest growing mechanical contracting team? B&I Contractors, Inc., a proud four-time winner of the Great Place to Work certification, is seeking an experienced and dedicated Pipe Shop Fabricator Welder 2nd shift to join our dynamic and expanding team. Why Choose B&I Contractors, Inc.? * Industry Leader: As Florida's fastest growing mechanical contractor, we specialize in large-scale commercial projects. * Continuous Development: Benefit from our NCCER-certified in-house and online training that equips you with the skills needed to advance in your career. * Comprehensive Benefits: Enjoy employer-paid health insurance, accrued vacation, and sick time, along with a wellness reimbursement program to support your overall well-being. * Retirement Benefits: We are a 100% employee owned company with an ESOP. You can also participate in our 401(k) plan with company match and explore post-tax Roth IRA options to secure your financial future. * Established Legacy: Join a team of over 1000 employees contributing to our success since 1960, with a proven track record of excellence in mechanical contracting. Key Responsibilities * Fabricate and weld metal components according to blueprints and specifications. * Operate various tools and equipment such as plasma cutters, iron worker, and hand tools. * Assemble fabricated parts using various techniques. * Read and interpret schematics and diagrams. * Perform quality checks to ensure finished products meet specifications. * Maintain a clean and organized work area. Qualifications * Previous experience in fabrication and welding. * Proficient in the use of hand tools. * Basic math skills for measurements and calculations. * Ability to read and interpret technical drawings and schematics. * Knowledge of different welding techniques including stick welding. * Must be willing to work 2nd shift hours Monday through Friday 3:00 pm - 11:30 pm. * Familiarity with operating overhead cranes or other lifting equipment is a plus. * This position requires the ability to lift and carry materials weighing up to 50 pounds on a frequent basis. The employee must be able to perform tasks involving physical labor, including lifting, pushing, pulling, and carrying materials, tools, or equipment. Manual material handling must be performed in accordance with OSHA safety standards and company policies to minimize risk of injury. * Esta posición requiere la capacidad de levantar y transportar materiales de hasta 50 libras de manera frecuente. El empleado debe poder realizar tareas que involucren trabajo físico, incluyendo levantar, empujar, jalar y transportar materiales, herramientas o equipo. El manejo manual de materiales debe realizarse de acuerdo con los estándares de seguridad de OSHA y las políticas de la compañía para minimizar el riesgo de lesiones. Ready to grow your career with a respected, employee-owned leader in mechanical contracting? Apply now and be a part of something built to last. B&I Contractors is committed to maintaining a safe and productive work environment. We are a drug-free workplace.

We're looking for Welders with aluminum welding experience who are excited to grow their careers while supporting critical energy infrastructure projects across the U.S. This hands-on field role offers the opportunity to work on a wide variety of job sites, including power plants, hydroelectric dams, and large-scale industrial facilities. You'll focus on systems such as Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers, and will be part of a fast-growing team that takes pride in safety, quality, and craftsmanship. What You'll Do: Weld aluminum components in multiple positions (vertical, horizontal, overhead - 6G test required) Read and interpret construction, welding, and electrical drawings Rig, lift, align, and set electrical bus duct equipment based on plans and specifications Demo, fit, and install new mechanical components as part of system upgrades Maintain tools and welding equipment in a safe, working condition Conduct safety checks and inspections; identify and address wear, defects, and deterioration Operate electrical testing equipment, including Hi-Pot, Ductor, and Megger Work effectively alongside field technicians, project teams, and other trades Complete daily job reports and timesheets Operate company vehicles and follow RMS Energy's safety and driving policies Follow strict safety and PPE usage protocols due to noise, electrical hazards, and elevated work areas Take initiative and work independently with minimal supervision The Experience We're Looking For: 3+ years of aluminum welding experience (MIG required, TIG preferred) Familiarity with medium and high voltage electrical equipment Ability to read and interpret technical drawings and field documentation Knowledge of OSHA safety standards, including PPE use and working at heights Experience with substation construction or electrical bus installation is preferred Proficient in operating forklifts, manlifts, and other field equipment Additional Requirements: Willingness to travel up to 75% across the continental U.S. High school diploma or GED required Valid driver's license with a history of safe and responsible driving Must pass a background check and drug/alcohol screening Legally authorized to work in the United States Available for extended and irregular hours as needed Able to work outdoors in all weather, at heights (100+ ft), in confined spaces, and around high-voltage equipment and heavy machinery Physically capable of lifting 50+ lbs and enduring extended physical activity Requires good vision, hearing, and English proficiency for safe, effective communication in noisy environments Bonus Points for: Completion of a trade school program, technical college, associate degree, or skilled trade certification in welding or a related field is strongly preferred TWIC Card CDL License Prior experience working with Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers Why Join RMS Energy: We're not just another power services company. We're a tight-knit, mission-driven team that values safety, teamwork, innovation, and continuous growth. Competitive Compensation - Overtime potential and merit-based raises Full Benefits - Medical, dental, and vision coverage fully paid for employees, starting the month after hire Steady Employment & Career Growth - Be part of a fast-growing company with promotion potential 401(k) with Company Match - Traditional & Roth options + free investment guidance Top-Tier Equipment - Provided to support you in the field Compensated Travel Time plus Per Diem - Earn while seeing new places Education Support - Paid training, certifications, and industry memberships Generous PTO - Paid vacation, holidays, and sick leave Employee Assistance Program - Legal, financial, and mental wellness support Want to be part of something meaningful? Apply today and join a team where People, Purpose, and Power come together - your future starts here. RMS Energy is an Equal Opportunity Employer. We believe diverse teams drive better outcomes, and we're committed to creating an inclusive environment where all employees feel valued and empowered. For more information about RMS Energy, please visit ******************

St Johns Ship Building, Inc. is a full-service shipbuilding and marine repair company that specializes in new construction and repair of commercial aluminum and steel vessels. Operations are conducted in a storm-protected 100-acre inland campus in the city of Palatka just 30 miles southwest of Jacksonville on the St. Johns River that provides direct access to the Atlantic Ocean. We are committed to providing top quality craftsmanship and personalized service by delivering vessels on time and on budget. Position Summary As an Aluminum Welder, you will use hand-welding or flame-cutting equipment to weld or join metal components, to fill holes, indentations, or seams of fabricated metal products. This position will be responsible for welding components of the ship and completing repairs or new builds on time, to specifications, and within scope of the project. Completes all the required company training and follows all company policies and procedures. Responsibilities Operate safety equipment and use safe work habits. Weld components in flat, vertical, or overhead positions. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Detect faulty operation of equipment or defective materials and notify supervisors. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Lie out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. Fill holes and increase the size of metal parts. Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. Gouge metals, using the air-arc gouging process. Guide and direct flames or electrodes on or across work pieces to straighten, bend, melt, or build up metal. Preheat work pieces prior to welding or bending, using torches or heating furnaces. Use fire suppression methods in industrial emergencies. Set up and use ladders and scaffolding as necessary to complete work. Hammer out bulges or bends in metal work pieces. Qualifications Six months to one-year related experience Must pass AWS certification within the first 60 days on the job High School Graduate or General Education Degree (GED) Accountability - Ability to accept responsibility and account for his/her actions. Accuracy - Ability to perform work accurately and thoroughly. Autonomy - Ability to work independently with minimal supervision. Detail Oriented - Ability to pay attention to the minute details of a project or task. Organized - Possessing the trait of being organized or following a systematic method of performing a task. Resource Management (People & Equipment) - Ability to obtain and appropriate the proper usage of equipment, facilities, materials, as well as personnel. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Technical Aptitude - Ability to comprehend complex technical topics and specialized information. Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience. Communication, Oral - Ability to communicate effectively with others using the spoken word. Judgment - The ability to formulate a sound decision using the available information. Reliability - The trait of being dependable and trustworthy. What We Have to Offer You Starting pay is $18+ per hour, based on experience. Medical, Dental, and Vision Cost Savings and Worksite Benefits Company paid Medical Gap Insurance Company paid Short Term Disability Company paid Basic Life and AD&D Company Match 401K Paid holidays Personal and Vacation time PHYSICAL DEMANDS Physical Demands Lift/Carry Stand C (Constantly) Walk C (Constantly) Sit O (Occasionally) Handling / Fingering C (Constantly) Reach Outward C (Constantly) Reach Above Shoulder C (Constantly) Climb F (Frequently) Crawl F (Frequently) Squat or Kneel F (Frequently) Bend F (Frequently) 10 lbs or less F (Frequently) 11-20 lbs F (Frequently) 21-50 lbs F (Frequently) 51-100 lbs N (Not Applicable) Over 100 lbs N (Not Applicable) Push/Pull 12 lbs or less F (Frequently) 13-25 lbs F (Frequently) 26-40 lbs F (Frequently) 41-100 lbs F (Frequently) N (Not Applicable) Activity is not applicable to this occupation. O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements Vision (Near, Distance, Peripheral, Depth Perception) Sense of Sound (hear alarms and radios) Sense of Touch Ability to wear Personal Protective Equipment (PPE) (safety glasses, hard hats, steel toed shoes, gloves) WORK ENVIRONMENT Outdoor Environment, Excessive Heat, Excessive Cold St Johns Ship Building is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Labor One is hiring TIG Pipe Welders for a shipyard in Florida . Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 or (251)385-0491 *Please send us a text if we don't answer* POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Complete welds to the specified standards using appropriate equipment and materials. Install and verify operation of high-pressure steel pipes and fittings. Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipes and/ or similar tubular products. Test installed piping systems and install other related items in accordance with the applicable plans and specifications. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Troubleshoot equipment. Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. Work with minimal supervision. Perform other duties as assigned. REQUIREMENTS Education/ Experience: High school diploma or GED equivalence plus three to five years of pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of the safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/ adaptability, initiative, interpersonal skills, attention to detail, safety consciousness, and multitasking. Maintain the confidential integrity of details pertaining to shipyard. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstanding extreme heat and cold in an outside climate or confined space. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Here at Alcom we believe in our mission, vision, and values. Mission: To be the most influential partner in the trailer industry. Vision: To become the market leader in innovative, quality transportation solutions through an unmatched commitment to our employees and customers. Values: Customer Focus, Integrity, Problem Solving, Teamwork The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Apply in person - 2526 W. New York Ave, Deland, Fl 32720 M-Th 6:00a - 4:30p | Friday Overtime Potential Heath Insurance Dental & Vision Insurance Short-Term & Long-Term Disability Paid Holidays and Paid Vacation Paid Life Insurance 401(K) plan with 4% match FUNCTIONS AND RESPONSIBILITIES: The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Reads and follows blueprints and work orders ensuring a quality product that meets customer demands. Welds different facets of a trailer, including but not limited to: tacking, clamping, and welding with proper bead size on bases and cages in accordance with the work order; ensures quality of welds for structural integrity. Obtains raw materials from Material Handlers. Buffs out rough edges using a hand-held power grinder. Notifies supervisor of any mechanical or material issues including but not limited to, defects in material, damage to the trailer, and deviations from work order. Ensures that finished product meets quality expectations. Strives for the highest level of quality and understands the need for continuous improvement; supports the concept of “good enough is never good enough.” Maintains a clean and safe work area; works to minimize scrap, places unused material back in appropriate area, and disposes of waste appropriately. Follows all safety procedures, wears appropriate personal protective equipment (PPE), and reports any accidents or near misses to supervisor immediately. Performs other related duties and assignments as required. Requirements: •Must be able to work quickly without sacrificing quality or safety •Must have a keen understanding of manufacturing processes. •Must be able to measure and cut accurately •Must possess the ability to creatively think and solve problems •Ability to read blueprints and work orders accurately •Ability to work in a fast- paced environment •Strong time management and organizational abilities Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace. EOE

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Now Hiring: Traveling Welders - Panama City, FL United Trades of America is currently seeking experienced Traveling Welders for a high-profile industrial project located in Panama City, Florida. This is an excellent opportunity for skilled tradespeople who take pride in precision welding, are comfortable with travel, and are ready to join a team committed to safety, quality, and performance. If you have a strong work ethic, are willing to travel, and meet the qualifications below, we want to connect with you! Position Overview: This project requires welders with a solid background in structural and/or pipe welding in industrial or heavy commercial environments. Welders will be responsible for fitting, welding, and inspecting work to ensure it meets or exceeds project standards. This is a travel role - per diem is available for qualified candidates. Pay is based on experience. Competitive hourly rates + per diem. Key Responsibilities: Perform various types of welding including MIG, TIG, Stick (SMAW/GTAW/GMAW) on structural steel and piping systems Interpret and work from blueprints, weld symbols, and technical drawings Prep materials, cut, grind, and align components as needed Follow project specifications and welding procedures Conduct visual and quality inspections on welds; maintain consistent quality Work in coordination with foremen and other trades to ensure project milestones are met Follow all safety protocols and maintain a clean, hazard-free work environment Report progress, issues, and material needs in a timely manner Requirements: Minimum 3+ years of welding experience in commercial or industrial environments Ability to pass weld tests (plate and/or pipe, depending on scope) Familiarity with various types of welding processes and materials Must have own welding hood, basic hand tools, and PPE Willingness to travel to Panama City, FL and work overtime as needed Strong work ethic, attention to detail, and ability to work independently or on a team Must pass pre-employment drug screen and background check Preferred Qualifications: Certified welder (AWS or other recognized certs) OSHA 10 or 30 certification Prior experience with traveling crews or per diem projects Comfortable working outdoors or in industrial conditions To Apply: Visit *************************** to upload your resume OR Send your resume directly to *****************************

This is a general description of the essential job functions and is not intended to be an employment contract. Eastern Shipbuilding Group, Inc. maintains its status as an at-will employer. Position requirements, skills, and abilities included in this have been determined to be the minimal standards required to successfully perform the position. Eastern Shipbuilding Group Inc. reserves the right to increase, waive or reduce these minimal standards. In no instance, however, should the duties, responsibilities, and requirements described be interpreted as all-inclusive. All employees of Eastern Shipbuilding Group, Inc. are expected to perform the duties as assigned by Eastern Shipbuilding Group, Inc., supervisory/management personnel, regardless of job title or routine job duties. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. To perform this job successfully, an individual is expected to be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability expected. In accordance with the Americans with Disabilities Act, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. However, no accommodation will be made which may pose serious health or safety risks to the employee or others or which imposes undue hardship on Eastern Shipbuilding. POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because Eastern Shipbuilding is continually growing to meet the needs of our customers, the essential duties and responsibilities may be different than described. Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Complete welds to the specified standards using appropriate equipment and materials. Install and verify operation of high-pressure steel pipes and fittings. Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. Test installed piping systems and install other related items in accordance with the applicable plans and specifications. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Troubleshoot equipment. Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. Work with minimal supervision. Perform other duties as assigned. SUPERVISORY RESPONSIBILITIES: May indirectly supervise and/or train subordinates. REQUIREMENTS Experience: Three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of the safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to Eastern Shipbuilding Group. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory We are equal opportunity/affirmative action employers, committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status, or any other protected characteristic under state or local law.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR bg FcZzNGMU

Our Mission : Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first. Job Purpose: Fabricate and refurbish wire rope slings and other lifting assemblies. Key Duties and Responsibilities: Fabricate and repair wire rope slings and assemblies; and Achieve qualification as an apprentice (minimum) or journeyman splicer. Perform other functions as required. Job Requirements: Must have experience in manufacturing role working with various tools. Must be able to lift up to 70 pounds. Must be comfortable standing for extended periods of time. Must be authorized to work in the United States without sponsorship Must be at least 18 years of age Must be able to pass a pre-employment drug test, physical and background check (including MVR) Bishop Lifting Products, Inc. and it's subsidiaries are an Affirmative Action and Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Are you looking for an opportunity to become part of a rapidly-growing industry? Bishop Lifting Products, Inc. is looking for talent that will hold true to our mission while maintaining the safety and knowledge that we have valued since we were founded in 1984. Apply today! We're ready to help you start your new career path.

A fitter mechanic working in the maritime industry, specifically on cruise ships, is responsible for the maintenance, repair, and installation of various mechanical systems and equipment onboard the vessel. They play a crucial role in ensuring the smooth operation and functionality of the ship's machinery and systems. Here is a general job description for a fitter mechanic on maritime cruise ships: Maintenance and Repair: Conduct routine maintenance tasks, inspections, and repairs on mechanical equipment such as engines, generators, pumps, valves, hydraulic systems, and HVAC (Heating, Ventilation, and Air Conditioning) systems. This involves diagnosing issues, troubleshooting, and replacing or repairing faulty components. Installation and Upgrades: Install new equipment and systems on the ship as needed. This includes fitting and aligning components, connecting pipes, cables, and wires, and ensuring proper functioning and integration with existing systems. Safety and Compliance: Adhere to safety protocols and regulations to ensure a safe working environment for oneself and others. Follow guidelines for the proper handling, storage, and disposal of hazardous materials and waste. Stay up to date with industry standards and regulations to ensure compliance. Documentation: Maintain accurate records of maintenance and repair activities, including work performed, parts used, and any relevant measurements or readings. Complete maintenance logs, reports, and other documentation as required by the company or regulatory bodies. Teamwork and Collaboration: Coordinate and collaborate with other members of the engineering department, including engineers, electricians, and other mechanics, to carry out maintenance tasks, repairs, and installations efficiently. Communicate effectively with supervisors, colleagues, and other departments as necessary. Emergency Response: Be prepared to respond to emergencies and breakdowns, including participating in drills and exercises. Quickly assess and resolve mechanical issues during critical situations to ensure the safety and well-being of passengers, crew, and the ship itself. Continuous Learning: Stay updated on the latest advancements and technologies in the maritime industry through training programs, workshops, and self-study. Keep abreast of new equipment, tools, and techniques that could enhance job performance and efficiency. Please note that specific job duties and responsibilities may vary depending on the cruise ship company, the size of the vessel, and the specific role within the engineering department. Working Place: Miami, FL, United States