Welder jobs in Kingsville, TX - 24 jobs

**Requisition ID: 177750** Plan, lay-out, weld, install, and repair all types of structural steel products in accordance with applicable plans, specifications, welding codes and industry standards. **Experience Level** Intermediate - Perform welding on various materials at required position using different welding processes, including, but not limited to, GTAW, SMAW, FCAW, GMAW and SAW. - Lay out, position, fit and weld various structural components, including flanges, piping supports, structural plates, beams, etc., in accordance with the supplied piping/structural fabrication drawings. - Set up, troubleshoot, and operate welding machines according to job specifications and welding procedures. - Adjust valves, gauges, and flames as needed and be capable of handling compressed gas and oxygen cylinders safely. - Operate air arc gouger, grinder, and other industry machines, tools, and equipment. **Qualifications** -May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. -Must possess working knowledge skills and abilities for position. -Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. -Ability to use hand tools, power tools and layout tools safe and efficiently. **Requirements** -Able to meet all physical requirements. -Must have all required tools -Expected to climb and work at heights and in confined spaces (may exceed 200 ft) -Able to work outdoors in all weather conditions -Able to work overtime, nights, and weekends as required by the workload -Observe and comply with all safety and project rules. Performs other duties as required. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit_Craft

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (956)382-2631 / (281)965-2749 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Description:Offshore Welder Job Description ** Offshore Welder **Department:** Offshore **Employment Type:** Full-time The Offshore Welder position requires the individual to demonstrate the ability to weld on piping and/or structural components as directed and per Acadian (or customer) welding procedure requirements. The role demands efficient, productive work throughout the day, punctual attendance, and professionalism in all working relationships. The Welder is ultimately responsible for the quality and completeness of their workmanship. Key Responsibilities **Use pipe cutting machine, or if unavailable, use beveling machine to cut pipe to the required length. Upon completion of every weld, clean and apply stencil/stamp (3/8” from every weld). Vessel fabrication/welding requires stenciling every three (3) feet of weld length. Communicate with the helper/rigger regarding necessary materials or equipment for each task. **Align parts using jacks, turnbuckles, wedges, drift pins, pry bars, and heavy hammers. **Straighten warped or bent parts using sledge, hand torch, straightening press, and push/pull methods. Ensure daily submission of accurate oxygen and acetylene bottle counts to offshore management. Ensure all welding activities comply with company policies, class requirements, and regulatory laws. Maintain accurate inventory of consumables to facilitate repair work, modifications, and general fabrication. Perform welding, flame cutting, and associated tasks as required. **Assemble and secure pipes, tubes, fittings, and related equipment according to specifications by welding, brazing, cementing, soldering, and threading joints. Inspect, examine, and test installed systems and pipelines using pressure gauges, hydrostatic testing, or other approved methods. **Ascend/descend stairwells frequently with or without tools and equipment. Plan pipe system layout, installation, or repair according to specifications. Read and understand blueprints and ISOs. **Demolish and install handrails and grating on platforms. Verify all measurements and check for square and level before welding. **Hang and swing on vertical ropes to/from platform and boat (potential rough seas/wind). Ensure all fabricated items are tagged with the correct job number, customer name, and piece number. Complete and inspect all weld passes. Ensure 100% penetration on all pipe welds, including hydro-welds; structural welds must follow drawings unless otherwise specified. Inspect all equipment (welding machine, leads, flux-core box, grinder, etc.) at the start of every shift. **Climb and work from heights as required. What You'll Need to Know Minimum of 2 years offshore experience. Recent offshore experience within the last 4 years. Minimum of 2 years experience welding pipe and/or structural on carbon steel. Ability to layout, fit, install, and assemble according to plans. Familiarity with emergency response/escape and water survival procedures on offshore facilities. HSE Responsibilities Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” - Vision & Mission Statement as fundamental core values. Demonstrate visible leadership and support proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture. Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, safe work practices, and client-specific regulatory requirements. Make a personal commitment and be accountable for HSE results, driving toward the achievement of defined goals. Clearly communicate these goals through direct reports, while coaching, mentoring, and empowering others to achieve desired outcomes. Conduct periodic quality assessments of HSE processes to enhance personal coaching and mentoring effectiveness and demonstrate ownership in the successful implementation of HSE programs. Requirements:

Job DescriptionDescription: OFS Facility Operations | Sub Arc Welder Force Pressure Control is seeking safety-oriented production personnel to work in its Orange Grove facility. Welding personnel must be able to operate with and without supervision, prepare and initiate jobs, maintain machinery and working production area, and record all data outlined in QAQC protocols. Three years working experience within sub arc work scopes is required as is working experience with alloys and API ring grooves. Working background with valve and other wellhead / surface pressure control equipment is valued. Candidates must be able to successfully pass bend test The Sub Arc Welder position is a full time, non-exempt position. Overtime in excess of 40 hours per work week will be required. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws. Requirements:

No teaching experience required, we will provide all necessary tools and training to succeed!! We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities * Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; * Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; * Modifies instructional methods and strategies to meet diverse students' needs; * Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; * Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements * Minimum of 3 years of industry experience preferred; * Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; * Certified AWS and/or NCCER. Benefits * Training & Development * Fun & Energetic, Family-Based Environment * Continuous Growth Opportunities * Medical, Dental, & Vision Options * Health Savings & Flexible Spending Options (HSA & FSA) * Basic Life & Accident Insurance * Short & Long-term Disability * 401K Retirement Plan * SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Job Description Pipe Welder 1st Class Project Details: Pipe Welder Shop and ships Essential Duties and Responsibilities: Other duties may be assigned. A welder must understand welding procedures and parameters. Can comprehend and utilize blueprints, sketches, drawings, technical. Manuals, gouge, and work process instruction. Welds steel plates and pipes in the repair and/or construction of marine vessels, industrial components, and associated equipment. Have the skills to use various types of welding equipment for different types of metal. Welds components in a flat, vertical, or overhead position. Performs related tasks such as cutting and grinding. Repairs broken or cracked parts, fills holes, and increases the size of metal parts. Welds metal parts together using gas welding, brazing, arc welding, wire fed welding, or tig welding process and procedures. Highly skilled welders often are trained to work with a wide variety of materials, such as titanium, aluminum, or exotic metals, in addition to steel. Select and set up welding equipment, execute the planned welds, and examine the welds to ensure that they meet standards or specifications. Required Education & Experience: High School Diploma, some college or technical school certification, six months to one year(s) experience or equivalent combination of education and experience. Must pass an ABS, or ASME weld test. Working Conditions: Open-air conditions such as noisy, hot, cold, etc. Must be able to stand and operate equipment for up to four continuous hours. You must wear hearing, eye, head protection and proper PPE. Some climbing (100 feet or higher) and lifting (50 lbs.) involved. Working with hot and sometimes hazardous materials. Work on inland and offshore barges or in industrial settings. Enter round manholes with inside diameters of 18”, and other internally confined spaces. Traverse gangways and scaffolding at varying heights. Necessary Equipment Operation: Blow torches- Motorized cutting torches; Pattern cutting torches; Welding torches. Gas welding, brazing, or cutting apparatus- Brazing equipment; Heliarc welding equipment; Oxyacetylene equipment; Portable gas operated arc welders. Manlift or personnel lift- hydraulic truck lifts; Swing stages Welding masks- Hand shields; Welding shields. Special Skills: Ability to work under deadlines and schedule pressures. Ability to read and interpret blueprints, sketches, drawings, and technical manuals. Excellent interpersonal and communication skills. High performance and a strong team player. Commitment to company values and safety program. Welder Position Basic Requirements: Qualifications of class - Class will be based upon judgment by quality control and/or production management in terms of the quality and productivity of the welds. Plate Welder 2nd Class (PLW2) - Welder capable of welding SMAW or FCAW on plate/structural with ABS Q2+4G or ASME or AWS plate test (2G+3G+4G). Plate Welder 1st Class (PLW1) - Welder capable of welding SMAW & FCAW on plate/structural with ABS Q2+4G or ASME or AWS plate test (2G+3G+4G). Pipe Welder 2nd Class (PPW2) - Welder capable of welding SMAW or FCAW on plate/structural &SMAW or FCAW on pipe with ABS Q3 or AWS 6g pipe test. Pipe Welder 1st Class (PPW1) - Welder capable of welding SMAW & FCAW and or GTAW on pipe. Must Pass ABS Q3 or ASME 6G or AWS 6G pipe test. Combination Welder 1st Class- Pipe/Plate/Structural (PPLW)- Welder capable of process / structural pipe and plate welding using GTAW+FCAW and or GTAW+SMAW. Combination Welder 2nd Class- Pipe/Plate/Structural (PPLW)- Welder capable of process / structural pipe and plate welding using GTAW+FCAW and or GTAW+SMAW. the individual responsibility of every employee to maintain a current awareness and understanding of appropriate regulations, internal policies and procedures, and to comply fully with those regulations, policies and procedures. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity Posters. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email: *********************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail: *********************. The statements herein are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as a comprehensive list of all responsibilities, duties, and skills required of assigned personnel. Powered by JazzHR e6xuCLrAxC

Industrial Air Flow Dynamics, Inc. is now hiring for our Spring Season! (March - June) We've Got the Gear, the Travel, and the Pay - Just Bring the Skill At Industrial Air Flow Dynamics, Inc., we know great welders don't just need a paycheck, they need support. That's why we supply all the tools and PPE required for each job, cover your travel and hotel, pay you for passing your weld test, and even reward you for bringing your friends along. When you work with us, you're not just another name on a roster. You're part of the crew that keeps America's power plants running. We're hiring experienced Stainless Steel Structural Welders (Flux-Core Process) for long term, nationwide turnaround work. If you're dependable, driven, and ready to get paid to travel, read on. Why Weld with Us? * Tools & PPE Provided - No need to haul your gear. We've got it covered. * Travel Covered - We pay your airfare and provide shared hotel accommodations. * Daily Per Diem - $30/day to cover meals and incidentals. * Referral Bonuses - Know someone who's got what it takes? Get paid when we hire them. * Fair Pay - $25/hour + $15/hour paid while you travel time to the project The Job You'll travel across the U.S. to power plant sites, welding stainless steel structural components using the Flux-Core process (309 wire on ½" carbon plate). You'll read and work from detailed blueprints, and perform 2G, 3G, and 4G welds in all positions including overhead and vertical, in high-pressure, physically demanding environments like boilers and scaffolding systems. What We're Looking For * 3+ years of industrial welding experience * Ability to pass bend-tested welds: 2G, 3G, and 4G (Flux-Core, 309 wire) * Comfortable working at heights and in tight, hot spaces * Willing to travel continuously nationwide * Strong work ethic, blueprint reading skills, and commitment to safety Pay & Benefits * $25/hour base pay + $15/hour travel pay + $30/day per diem * Paid airfare + hotel accommodations * Rental car provided (must have valid driver's license) * Referral bonuses when your referrals get hired Full Benefits Package Includes: * Safe Harbor 401(k) * Medical, Dental & Vision coverage * Life, AD&D, Short & Long-Term Disability options Quick, No-Nonsense Hiring Process Our application is simple and fast. No long forms, no fluff. Just tell us who you are, where you've worked, and how to reach you. If it's a match, we'll reach out from an 281 area code. Next Steps: * Phone screening * Weld test (with clear instructions) * Drug Test If you're a skilled welder who wants to travel the country, earn great pay, and work with a team that has your back, this is your chance. Apply now and bring your skills to the job. We'll handle the rest!

Job Description No teaching experience required, we will provide all necessary tools and training to succeed!! We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; Modifies instructional methods and strategies to meet diverse students' needs; Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements Minimum of 3 years of industry experience preferred; Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; Certified AWS and/or NCCER. Benefits Training & Development Fun & Energetic, Family-Based Environment Continuous Growth Opportunities Medical, Dental, & Vision Options Health Savings & Flexible Spending Options (HSA & FSA) Basic Life & Accident Insurance Short & Long-term Disability 401K Retirement Plan SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

Job Description Are you a talented welder looking to travel and work on exciting projects across the country? Tanco Engineering wants to hear from you! With over 40 years in the industry, we're proud of our reputation for safety, reliability, and excellence. As a Storage Tank Welder with us, you'll play a critical role in ensuring the quality and safety of storage tanks. You'll join a friendly team that values your skills and contributions while giving you the chance to work in varied locations, meeting new people, and tackling interesting challenges. At Tanco Engineering, we believe in teamwork and open communication. You won't just be a number; you'll be a valued part of our family. So, if you're ready for an opportunity to shine, let's make it happen! Position Duties: Utilize your welding skills to ensure the structural integrity of storage tanks through various techniques like stick and flux core welding. Read and interpret blueprints to ensure your welding tasks meet all specifications. Inspect your work for quality control, promptly addressing any issues you may uncover. Work alongside your team to ensure projects are completed efficiently and on time. Maintain a safe work environment by following all safety protocols. Keep your welding equipment in top shape with routine maintenance and troubleshooting as needed. Requirements At least a year of welding experience, ideally in the storage tank industry. Attention to detail with a skill for spotting potential defects. A willingness to lift heavy equipment and engage in physically demanding tasks. Strong communication abilities coupled with a collaborative spirit. A passion for travel and the flexibility to work in various locations. A TWIC card might be required Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Background checks will also be included in the hiring procedure. Must be over 18 and eligible to work in the United States. Benefits Medical, dental, & vision insurance Retirement plan & ESOP Competitive pay with annual reviews. Join our team and enjoy competitive starting pay of $30-$34 per hour, which may vary depending on your experience and the results of your welding test. In addition to the attractive pay range, we offer a subsistence allowance of $125 (exceptions may apply per location) and reimbursement of $0.70 per mile for travel (when applicable).

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (956)382-2631 / (281)965-2749 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Full-time Description Offshore Welder Job Description ** Offshore Welder **Department:** Offshore **Employment Type:** Full-time The Offshore Welder position requires the individual to demonstrate the ability to weld on piping and/or structural components as directed and per Acadian (or customer) welding procedure requirements. The role demands efficient, productive work throughout the day, punctual attendance, and professionalism in all working relationships. The Welder is ultimately responsible for the quality and completeness of their workmanship. Key Responsibilities **Use pipe cutting machine, or if unavailable, use beveling machine to cut pipe to the required length. Upon completion of every weld, clean and apply stencil/stamp (3/8” from every weld). Vessel fabrication/welding requires stenciling every three (3) feet of weld length. Communicate with the helper/rigger regarding necessary materials or equipment for each task. **Align parts using jacks, turnbuckles, wedges, drift pins, pry bars, and heavy hammers. **Straighten warped or bent parts using sledge, hand torch, straightening press, and push/pull methods. Ensure daily submission of accurate oxygen and acetylene bottle counts to offshore management. Ensure all welding activities comply with company policies, class requirements, and regulatory laws. Maintain accurate inventory of consumables to facilitate repair work, modifications, and general fabrication. Perform welding, flame cutting, and associated tasks as required. **Assemble and secure pipes, tubes, fittings, and related equipment according to specifications by welding, brazing, cementing, soldering, and threading joints. Inspect, examine, and test installed systems and pipelines using pressure gauges, hydrostatic testing, or other approved methods. **Ascend/descend stairwells frequently with or without tools and equipment. Plan pipe system layout, installation, or repair according to specifications. Read and understand blueprints and ISOs. **Demolish and install handrails and grating on platforms. Verify all measurements and check for square and level before welding. **Hang and swing on vertical ropes to/from platform and boat (potential rough seas/wind). Ensure all fabricated items are tagged with the correct job number, customer name, and piece number. Complete and inspect all weld passes. Ensure 100% penetration on all pipe welds, including hydro-welds; structural welds must follow drawings unless otherwise specified. Inspect all equipment (welding machine, leads, flux-core box, grinder, etc.) at the start of every shift. **Climb and work from heights as required. What You'll Need to Know Minimum of 2 years offshore experience. Recent offshore experience within the last 4 years. Minimum of 2 years experience welding pipe and/or structural on carbon steel. Ability to layout, fit, install, and assemble according to plans. Familiarity with emergency response/escape and water survival procedures on offshore facilities. HSE Responsibilities Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” - Vision & Mission Statement as fundamental core values. Demonstrate visible leadership and support proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture. Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, safe work practices, and client-specific regulatory requirements. Make a personal commitment and be accountable for HSE results, driving toward the achievement of defined goals. Clearly communicate these goals through direct reports, while coaching, mentoring, and empowering others to achieve desired outcomes. Conduct periodic quality assessments of HSE processes to enhance personal coaching and mentoring effectiveness and demonstrate ownership in the successful implementation of HSE programs.

←Back to all jobs at FORCE PRESSURE CONTROL LLC Sub Arc Welder FORCE PRESSURE CONTROL LLC is an EEO Employer - M/F/Disability/Protected Veteran Status OFS Facility Operations | Sub Arc Welder Force Pressure Control is seeking safety-oriented production personnel to work in its Orange Grove facility. Welding personnel must be able to operate with and without supervision, prepare and initiate jobs, maintain machinery and working production area, and record all data outlined in QAQC protocols. Three years working experience within sub arc work scopes is required as is working experience with alloys and API ring grooves. Working background with valve and other wellhead / surface pressure control equipment is valued. Candidates must be able to successfully pass bend test The Sub Arc Welder position is a full time, non-exempt position. Overtime in excess of 40 hours per work week will be required. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws. Please visit our careers page to see more job opportunities.

Project Details: Pipe Welder Shop and ships Essential Duties and Responsibilities: Other duties may be assigned. A welder must understand welding procedures and parameters. Can comprehend and utilize blueprints, sketches, drawings, technical. Manuals, gouge, and work process instruction. Welds steel plates and pipes in the repair and/or construction of marine vessels, industrial components, and associated equipment. Have the skills to use various types of welding equipment for different types of metal. Welds components in a flat, vertical, or overhead position. Performs related tasks such as cutting and grinding. Repairs broken or cracked parts, fills holes, and increases the size of metal parts. Welds metal parts together using gas welding, brazing, arc welding, wire fed welding, or tig welding process and procedures. Highly skilled welders often are trained to work with a wide variety of materials, such as titanium, aluminum, or exotic metals, in addition to steel. Select and set up welding equipment, execute the planned welds, and examine the welds to ensure that they meet standards or specifications. Required Education & Experience: High School Diploma, some college or technical school certification, six months to one year(s) experience or equivalent combination of education and experience. Must pass an ABS, or ASME weld test. Working Conditions: Open-air conditions such as noisy, hot, cold, etc. Must be able to stand and operate equipment for up to four continuous hours. You must wear hearing, eye, head protection and proper PPE. Some climbing (100 feet or higher) and lifting (50 lbs.) involved. Working with hot and sometimes hazardous materials. Work on inland and offshore barges or in industrial settings. Enter round manholes with inside diameters of 18”, and other internally confined spaces. Traverse gangways and scaffolding at varying heights. Necessary Equipment Operation: Blow torches- Motorized cutting torches; Pattern cutting torches; Welding torches. Gas welding, brazing, or cutting apparatus- Brazing equipment; Heliarc welding equipment; Oxyacetylene equipment; Portable gas operated arc welders. Manlift or personnel lift- hydraulic truck lifts; Swing stages Welding masks- Hand shields; Welding shields. Special Skills: Ability to work under deadlines and schedule pressures. Ability to read and interpret blueprints, sketches, drawings, and technical manuals. Excellent interpersonal and communication skills. High performance and a strong team player. Commitment to company values and safety program. Welder Position Basic Requirements: Qualifications of class - Class will be based upon judgment by quality control and/or production management in terms of the quality and productivity of the welds. Plate Welder 2nd Class (PLW2) - Welder capable of welding SMAW or FCAW on plate/structural with ABS Q2+4G or ASME or AWS plate test (2G+3G+4G). Plate Welder 1st Class (PLW1) - Welder capable of welding SMAW & FCAW on plate/structural with ABS Q2+4G or ASME or AWS plate test (2G+3G+4G). Pipe Welder 2nd Class (PPW2) - Welder capable of welding SMAW or FCAW on plate/structural &SMAW or FCAW on pipe with ABS Q3 or AWS 6g pipe test. Pipe Welder 1st Class (PPW1) - Welder capable of welding SMAW & FCAW and or GTAW on pipe. Must Pass ABS Q3 or ASME 6G or AWS 6G pipe test. Combination Welder 1st Class- Pipe/Plate/Structural (PPLW)- Welder capable of process / structural pipe and plate welding using GTAW+FCAW and or GTAW+SMAW. Combination Welder 2nd Class- Pipe/Plate/Structural (PPLW)- Welder capable of process / structural pipe and plate welding using GTAW+FCAW and or GTAW+SMAW. the individual responsibility of every employee to maintain a current awareness and understanding of appropriate regulations, internal policies and procedures, and to comply fully with those regulations, policies and procedures. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity Posters. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email: [email protected]. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail: [email protected]. The statements herein are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as a comprehensive list of all responsibilities, duties, and skills required of assigned personnel.

Job Description Industrial Air Flow Dynamics, Inc. is now hiring for our Spring Season! (March - June) We've Got the Gear, the Travel, and the Pay - Just Bring the Skill At Industrial Air Flow Dynamics, Inc., we know great welders don't just need a paycheck, they need support. That's why we supply all the tools and PPE required for each job, cover your travel and hotel, pay you for passing your weld test, and even reward you for bringing your friends along. When you work with us, you're not just another name on a roster. You're part of the crew that keeps America's power plants running. We're hiring experienced Stainless Steel Structural Welders (Flux-Core Process) for long term, nationwide turnaround work. If you're dependable, driven, and ready to get paid to travel, read on. Why Weld with Us? Tools & PPE Provided - No need to haul your gear. We've got it covered. Travel Covered - We pay your airfare and provide shared hotel accommodations. Daily Per Diem - $30/day to cover meals and incidentals. Referral Bonuses - Know someone who's got what it takes? Get paid when we hire them. Fair Pay - $25/hour + $15/hour paid while you travel time to the project The Job You'll travel across the U.S. to power plant sites, welding stainless steel structural components using the Flux-Core process (309 wire on ½" carbon plate). You'll read and work from detailed blueprints, and perform 2G, 3G, and 4G welds in all positions including overhead and vertical, in high-pressure, physically demanding environments like boilers and scaffolding systems. What We're Looking For 3+ years of industrial welding experience Ability to pass bend-tested welds: 2G, 3G, and 4G (Flux-Core, 309 wire) Comfortable working at heights and in tight, hot spaces Willing to travel continuously nationwide Strong work ethic, blueprint reading skills, and commitment to safety Pay & Benefits $25/hour base pay + $15/hour travel pay + $30/day per diem Paid airfare + hotel accommodations Rental car provided (must have valid driver's license) Referral bonuses when your referrals get hired Full Benefits Package Includes: Safe Harbor 401(k) Medical, Dental & Vision coverage Life, AD&D, Short & Long-Term Disability options Quick, No-Nonsense Hiring Process Our application is simple and fast. No long forms, no fluff. Just tell us who you are, where you've worked, and how to reach you. If it's a match, we'll reach out from an 281 area code. Next Steps: Phone screening Weld test (with clear instructions) Drug Test If you're a skilled welder who wants to travel the country, earn great pay, and work with a team that has your back, this is your chance. Apply now and bring your skills to the job. We'll handle the rest! Job Posted by ApplicantPro

Job Description No teaching experience required, we will provide all necessary tools and training to succeed!! Full and part-time available We call it being a life changer, but you'll call it a job you love while helping others find the same. You'll have a hand in improving the lives of countless SCI students throughout Texas by working with impassioned educators and campus faculty in a collaborative, interactive environment to create optimized environment for our students. Responsibilities Demonstrates and applies a thorough and accurate knowledge of the teaching field and discipline; Plans and organizes instruction in ways which maximize student learning. Practice excellence in teaching and instruction; Modifies instructional methods and strategies to meet diverse students' needs; Prepare lesson plans and teach course as prescribed by the approved institutional curriculum; Encourages the development of communication skills and higher order thinking skills through appropriate assignments. Requirements Minimum of 3 years of industry experience preferred; Prior post-secondary related teaching experience of at least 1 year in subject matter is highly preferred; Certified AWS and/or NCCER. Benefits Training & Development Fun & Energetic, Family-Based Environment Continuous Growth Opportunities Medical, Dental, & Vision Options Health Savings & Flexible Spending Options (HSA & FSA) Basic Life & Accident Insurance Short & Long-term Disability 401K Retirement Plan SCI is an Equal Opportunity employer. About Southern Careers Institute SCI has been changing lives for over 60 years, now and we're just getting started. We offer certification-based training with programs in Medical, Business, Cosmetology, Skilled-Trades and Technology with campuses spanning across central and south Texas as well as online. Our students can graduate most of our programs in under one year and with real-world experience under their belt.

OFS Facility Operations | Sub Arc Welder Force Pressure Control is seeking safety-oriented production personnel to work in its Orange Grove facility. Welding personnel must be able to operate with and without supervision, prepare and initiate jobs, maintain machinery and working production area, and record all data outlined in QAQC protocols. Three years working experience within sub arc work scopes is required as is working experience with alloys and API ring grooves. Working background with valve and other wellhead / surface pressure control equipment is valued. Candidates must be able to successfully pass bend test The Sub Arc Welder position is a full time, non-exempt position. Overtime in excess of 40 hours per work week will be required. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws.

Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 ; (956)247-2467 ; (281)965-2749 *Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 20005 State Highway 48 Brownsville, TX 78521 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence. 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention. 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) 4. Must be able to effectively confer job related information to the supervisor. 5. Must understand SMAW, FCAW, and GMAW. 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal) • FCAW Full Penetration weld with permanent backing (ceramic and metal) • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals. 8. Must possess a working knowledge of welding equipment and work processes used in marine welding. 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work. 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. 11. Must understand the US customary and metric measurement system. 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks. 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. . 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor. 4. Work shifts and overtime as assigned. 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and shipyards best safety practices. 6. Keep your work area clean and safe at all times, especially at the end of the shift. 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor. 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day). 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day). 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps). 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles. 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day). 9. Respond to visual, verbal, and audible sounds/commands. 10. Work at heights above 12' from ladders, scaffolding, and manlifts. 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Industrial Air Flow Dynamics, Inc. is now hiring for our Spring Season! (March - June) We've Got the Gear, the Travel, and the Pay - Just Bring the Skill At Industrial Air Flow Dynamics, Inc., we know great welders don't just need a paycheck, they need support. That's why we supply all the tools and PPE required for each job, cover your travel and hotel, pay you for passing your weld test, and even reward you for bringing your friends along. When you work with us, you're not just another name on a roster. You're part of the crew that keeps America's power plants running. We're hiring experienced Stainless Steel Structural Welders (Flux-Core Process) for long term, nationwide turnaround work. If you're dependable, driven, and ready to get paid to travel, read on. Why Weld with Us? Tools & PPE Provided - No need to haul your gear. We've got it covered. Travel Covered - We pay your airfare and provide shared hotel accommodations. Daily Per Diem - $30/day to cover meals and incidentals. Referral Bonuses - Know someone who's got what it takes? Get paid when we hire them. Fair Pay - $25/hour + $15/hour paid while you travel time to the project The Job You'll travel across the U.S. to power plant sites, welding stainless steel structural components using the Flux-Core process (309 wire on ½" carbon plate). You'll read and work from detailed blueprints, and perform 2G, 3G, and 4G welds in all positions including overhead and vertical, in high-pressure, physically demanding environments like boilers and scaffolding systems. What We're Looking For 3+ years of industrial welding experience Ability to pass bend-tested welds: 2G, 3G, and 4G (Flux-Core, 309 wire) Comfortable working at heights and in tight, hot spaces Willing to travel continuously nationwide Strong work ethic, blueprint reading skills, and commitment to safety Pay & Benefits $25/hour base pay + $15/hour travel pay + $30/day per diem Paid airfare + hotel accommodations Rental car provided (must have valid driver's license) Referral bonuses when your referrals get hired Full Benefits Package Includes: Safe Harbor 401(k) Medical, Dental & Vision coverage Life, AD&D, Short & Long-Term Disability options Quick, No-Nonsense Hiring Process Our application is simple and fast. No long forms, no fluff. Just tell us who you are, where you've worked, and how to reach you. If it's a match, we'll reach out from an 281 area code. Next Steps: Phone screening Weld test (with clear instructions) Drug Test If you're a skilled welder who wants to travel the country, earn great pay, and work with a team that has your back, this is your chance. Apply now and bring your skills to the job. We'll handle the rest!

Description:Offshore Fitter Job Description ** Offshore Fitter **Department:** Offshore **Employment Type:** Full-time The Offshore Fitter is responsible for accurately laying out, cutting, and fitting piping, vessel, and structural components based on supplied drawings or field-verified dimensions. This position requires offshore construction experience, physical capability, and a strong commitment to quality, productivity, and safety. The Fitter must maintain professionalism, show up on time, and work effectively with helpers, riggers, and welders. Key Responsibilities Figure material take-offs on drawings for required cut lengths. **Use pipe cutting machine, or if unavailable, use beveling machine to cut pipe to required length. Communicate with helper/rigger to identify needed material or equipment for each task. **Align parts using jacks, turnbuckles, wedges, drift pins, pry bars, and heavy hammers. Mark reference points on floor or face block and transpose them to workpiece using measuring devices, squares, chalk, and soapstone. Give instructions to welders to build up low spots or short pieces with weld. **Straighten warped or bent parts using sledge, hand torch, straightening press, and push-pull methods. **Remove high spots and cut bevels using hand files, portable grinders, and cutting torch. Examine blueprints and plan work sequence, applying knowledge of geometry, weld shrinkage, machining, and metal thickness. **Assemble and secure pipes, tubes, fittings, and related equipment using welding, brazing, cementing, soldering, and threading joints. Label all information on pipe before cutting; transfer item numbers onto cut sheet and carry them over to drop pipe. Inspect and test installed systems and pipelines using pressure gauges, hydrostatic testing, observation, or other methods. **Ascend/descend stairwells frequently with or without tools and equipment. Plan pipe system layout, installation, or repair per specifications. Read and understand blueprints and ISOs. **Demolish and install handrails and grating on platform. Verify all measurements, checking for square and level before releasing to welder. Note pre-weld dimensions on fitter drawings. **Hang and swing on vertical rope to/from platform and boat (potential rough seas/wind). Ensure all fabricated items are tagged with the correct job number, customer name, and piece number. **Climb and work from heights. **Pull tools and equipment up/down to workstations or areas. Show up to work on time and as scheduled. Inspect all equipment daily (torch, torch hoses, grinder, levels, tapes, etc.). Maintain a clean and safe work area by sweeping as needed. Complete and discuss a thorough Job Safety and Environmental Analysis (JSEA) prior to each task. Maintain a positive attitude toward customers and represent ACI professionally. What You Need to Know Preferably 2 years minimum experience in fitting (piping, vessel, and structural) fabrication. Minimum of 2 years recent offshore construction experience. Most recent offshore experience within the last 4 years. Ability to read and interpret ISOs and blueprints. Familiarity with offshore emergency response, escape procedures, and water survival skills. HSE Responsibilities Embrace, lead, and demonstrate “Acadian F.I.R.S.T.” - Vision & Mission Statement as fundamental core values. Demonstrate visible leadership and support proactive safety processes (JSA, Time Out & TEAM BBS Observations) to achieve an incident-free workplace and advance our safety culture. Adhere to all Health, Safety & Environmental (HSE) Management System policies, procedures, safe work practices, and client-specific regulatory requirements. Make a personal commitment and be accountable for HSE results, driving toward the achievement of defined goals. Clearly communicate these goals through direct reports, while coaching, mentoring, and empowering others to achieve desired outcomes. Conduct periodic quality assessments of HSE processes to enhance personal coaching and mentoring effectiveness and demonstrate ownership in the successful implementation of HSE programs. Requirements: