Welder jobs in Knoxville, TN

Principal Accountabilities Anchor steel supports from ceiling joists to hold pipes in place. Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment. Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment. Cut openings in structures to accommodate pipes or pipe fittings, using hand or power tools. Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders. Direct helpers engaged in pipe cutting, preassembly, or installation of plumbing systems or components. Physical Requirements: Must be able to perform physical activities that require considerable use of arms and legs and moving the whole body, such as climbing, lifting, balancing, walking, stooping, and handling materials. Must be able to make repairs and installations from ladders, scaffolding, and platforms, and where the systems and equipment worked on are in hard-to-reach places. Ability to stand, stoop, bend, kneel, climb, and work in tiring and uncomfortable positions. Must be able to frequently handle, lift, carry, and set up parts and equipment that weigh up to 50 pounds. Working Conditions The work is done inside and outside, and is usually dirty, dusty, and greasy. The pipefitters are sometimes required to make installations and repairs in areas where bad smelling fumes are present. There is frequent exposure to the possibility of uncomfortable heat conditions. The pipefitters are frequently exposed to the possibility of strains, cuts, scrapes, bruises, burns, and infections. They are occasionally exposed to the possibility of broken bones. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by persons assigned to the position. They are not intended to be an exhaustive list of all associated responsibilities, skills, efforts or working conditions. BESCO-Engert reserves the right to change, amend, add, delete, and otherwise assign any and all duties, responsibilities and position titles as it deems necessary to meet the needs of the business.

Job Description We are seeking precision-driven pipefitters and TIG pipe welders to support the fabrication and installation of high-purity stainless steel piping systems. This is a 8-12-week W2 contract role with strong potential for full-time hire based on performance, skill, and reliability. You'll be working in a clean, high-spec manufacturing environment, fabricating complex sanitary and industrial-grade process piping for global water purification, pharmaceutical, and industrial sanitation systems. Your ability to read blueprints, interpret isometric pipe drawings, and execute clean, consistent welds will directly support systems deployed in some of the world's most critical environments. This is an excellent opportunity for skilled tradespeople who take pride in precision layout, measurement, and high-integrity welds, and who thrive in structured, safety-conscious teams. Pay & Benefits Full-Time $35 - $40 /hr Medical, Dental, Vision, 401k, Paid Leave, Personal Leave and Sick Leave Contract 8-12 week contract W2 employee with full benefits from day 1 Strong ability to transition to full time employee based on performance Shift & Schedule Monday - Thursday 6:00am - 4:30pm OT may be required on Friday's 6:00am - 2:30pm Requirements Responsibilities Fit, prep, and install stainless steel process piping from blueprints, isometric drawings, and P&IDs Perform precision TIG welding on sanitary and industrial pipe (primarily stainless steel, occasional carbon) Execute layout, cutting, tacking, and fit-up of complex piping runs with minimal supervision Ensure welds meet internal quality and high-purity cleanliness standards (sanitary or orbital TIG where required) Use measurement tools (e.g., tape measures, levels, squares) to maintain tight tolerances and proper slope/fall Coordinate with mechanical team to complete full system builds (skids, racks, pump packages, etc.) Use material handling equipment (forklifts, overhead cranes, carts) to move and stage pipe and components Maintain a clean, organized, and safe work area in line with manufacturing and industry standards Support project throughput and team goals by meeting production schedules and upholding quality targets Participate in safety and process improvement efforts; uphold all QA/QC protocols and inspection criteria Benefits Qualifications 3+ years of hands-on pipefitting and TIG pipe welding experience, preferably in industrial, sanitary, or high-spec manufacturing environments Proficient in reading and interpreting blueprints, isometric piping diagrams, weld symbols, and spool sheets Demonstrated ability to fit and weld stainless steel pipe to tight tolerances with minimal supervision Experience with sanitary pipefitting a strong plus (orbital welding, purge welding, autogenous welds, etc.) Comfortable working in structured, clean environments with tight tolerances and high expectations Familiar with hand and power tools: grinders, saws, bevelers, purging equipment, etc. Forklift and overhead crane experience preferred High school diploma or GED required U.S. Citizenship required due to client worksite security restrictions Must pass hands-on weld test (TIG on stainless process pipe) before assignment Willing to work overtime as needed, including some Fridays

Are you a skilled welder looking for an exciting opportunity in fabrication? Join our team as a Fabrication Welder and showcase your expertise in Stick, Mig, and Tig welding techniques. We are seeking proficient welders who are dedicated to producing high-quality workmanship. The job's specifics are contingent on successfully passing a weld test, ensuring that our team members possess the necessary skills to excel in this role. Responsibilities: Perform Stick, Mig, and Tig welding operations according to project specifications. Interpret blueprints, drawings, and welding symbols to complete fabrication tasks accurately. Set up and operate welding equipment safely and efficiently. Conduct weld tests to ensure compliance with quality standards and specifications. Inspect welds for defects and make necessary adjustments to maintain quality. Maintain a clean and organized work area to ensure safety and efficiency. Collaborate with team members and supervisors to meet project deadlines and goals. Qualifications: Proficiency in Stick, Mig, and Tig welding techniques. Experience in fabrication and welding in a manufacturing or similar environment. Ability to interpret blueprints, drawings, and welding symbols. Own a welding hood and basic welding tools. Strong attention to detail and commitment to producing high-quality work. Ability to pass a weld test as part of the job application process. Benefits: Competitive hourly wage ranging from $20 to $25, depending on experience. Opportunity for overtime hours as needed. Potential for career growth and advancement within the company. Positive work environment with supportive team members. Comprehensive training and development opportunities. If you're a skilled welder with expertise in Stick, Mig, and Tig welding and are ready to take on new challenges in fabrication, apply now for the Fabrication Welder position. Join our team and become part of a dynamic and growing organization committed to excellence in welding and fabrication.

LOOKING FOR EXPERIENCE FLUX CORE WELDERS. MINIMUM OF 5 YEARS OF EXPERIENCE IS TEMP TO PERM - MONDAY THRU THURSDAY 10 HOUR SHIFTS. PAID WEEKLY MUST HAVE EXPERIENCE IN VERTICAL, HORIZONTAL AND FLAT WELDING: 1/16 AND 7018 WIRE. MUST HAVE OWN HOOD, SLEEVES, GLOVES, STEEL TOWED BOOTS APPLY: KNOXVILLE STAFFING 2115 MIDDLEBROOK PK KNOXVILE TN 37921 APPLICATIONS TAKEN MONDAY THRU FRIDAY FROM 8 AM - 2 PM. BRING 2 FORMS OF IDENTIFICATION AND YOUR RESUME. WELDING TEST SCHEDULED IMMEDIATELY. OR APPLYON LINE: rebecca@knoxvillestaffing.com dena@knoxvillestaffing.com

Rogers Group, Inc., headquartered in Nashville, is a privately held aggregates and asphalt highway construction company operating in 12 states with over 3,000 employees. RGI, established in 1908, has the distinction of being recognized as the largest privately held aggregate producer in the United States. We have 86 quarries and 56 asphalt plants across Tennessee, Mississippi, Georgia, Alabama, South Carolina, North Carolina, Kentucky, Arkansas, Texas, Indiana, Illinois, and Ohio. The successful candidate for this role will have an uncompromising emphasis on safety excellence, be a self-starter and will have responsibilities that include, but are not limited to: Inspect and perform maintenance on ground engaging equipment Fabricate various components for the plants throughout our East TN division Maintain a clean and safe work environment Other duties as assigned Qualifications Previous maintenance experience is a plus Mechanical aptitude/ability to diagnose and perform repairs as needed Welding and cutting experience preferred Experience in steel erection/destruction i.e., welding, cutting, and fitting preferred Previous experience working in a rock quarry preferred Must pass pre-employment drug screening As a Rogers Group employee, you will have access to our competitive company perks, including: Group insurance options plus Health Savings Account with annual company contribution. Company paid life insurance, disability insurance, and more. Retirement 401K account with company contribution and match. Paid Holidays Paid vacation Annual performance-based merit increases. Career growth opportunities Rogers Group provides extensive benefits, strong compensation, and a safe, drug-free working environment. RGI EEO Statement An Equal Opportunity Employer seeking candidates without regard to age, race, national origin, gender, disability, veteran status, gender identity, sexual orientation, or any other protected status. All applications are accepted online at **********************

Job Description We are seeking an experienced and detail-oriented Welder/Fabricator to join our team. This role involves fabricating and welding metal components according to blueprints and technical specifications. The ideal candidate will have strong welding skills, a solid understanding of fabrication processes, and a commitment to safety and quality. Key Responsibilities: Fabrication: Cut, shape, and assemble metal components using hand tools, power tools, and machinery. Welding: Perform MIG, TIG, and/or Stick welding on various metals, including carbon and stainless steel. Blueprint Interpretation: Read and interpret blueprints, technical drawings, and work specifications to complete projects accurately. Quality Control: Inspect and test welds to ensure proper quality, structural integrity, and dimensional accuracy. Equipment Operation: Safely operate tools, machinery, and equipment such as forklifts, cranes, grinders, and measuring devices. Maintenance: Maintain a clean and organized work area and perform basic maintenance on welding and fabrication equipment. Safety Compliance: Follow all company safety policies and OSHA guidelines and use appropriate PPE at all times. Qualifications: Proven experience as a welder, fabricator, or similar role. Proficiency in reading blueprints and using measuring tools such as tape measures, calipers, and micrometers. Hands-on experience with MIG, TIG, and/or Stick welding processes. Ability to lift and maneuver materials up to 50 pounds. Willingness to work overtime or weekends when required. Strong commitment to workplace safety and quality standards. IND2

Allegiant Manufacturing a one stop source for metal working solutions including stamping, fabrication, value-added assembly, tooling & machining, located in Maryville, TN has an opportunity for a Welder . We strive to provide competitive wages & benefits to our employees. We pay our employees weekly. We care about our employee's financial well-being and are invested in creating a work environment where our employees feel heard, valued, and taken care of. Tour our website at ******************** to discover more about us. SUMMARY Set up and operate welding machines that weld together and mass-produce component parts of fabricated metal products as specified by blueprints (read and understand weld symbols), layouts, welding procedures or oral instructions. Join two pieces of metal to create a quality customer product using methods such as MIG welding. Robot and spot weld included. Tack-weld or weld components and assemblies, using electric, gas, arc, or other welding equipment. Heats, forms, and dresses metal parts using hand tools, torch, or arc welding equipment. Ignites torch and adjusts valves, amperage or voltage to obtain desired flame or arc. Analyzes engineering drawings and specifications to plan layout, assembly, and welding operations. ESSENTIAL DUTIES & RESPONSIBILITIES: Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. Connects cables from welding unit to obtain amperage, voltage, slope, and pulse, as specified. Starts power supply to produce electric current. Strikes (forms) arc, which generates heat to melt and deposit metal from electrode to workpiece and join edges of workpiece. Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. Position and clamp work pieces together or assemble them in jig or fixture. Measure's part dimensions to determine accuracy of machine operation May tack assemblies together. May operate other machine shop equipment to prepare components for welding. Works safely at all times and follows safety procedures. Operates any equipment needed to perform job. Performs related duties as assigned by supervision. MINIMUM QUALIFICATIONS/REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily and demonstrate the ability to speak and read English. Must consistently meet weld quality standards and demonstrate knowledge of MIG, stainless steel, carbon steel and aluminum welding, and automated welding where applicable. Employees must supply their own hand tools. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUATION and/or EXPERIENCE REQUIRED: High School diploma or general education degree (GED). Six months to one year of related experience and/or vocational training, or experience in a metal fabrication shop. PHYSICAL DEMANDS Ability to lift 50lbs with or without accommodations. Ability to stand on feet for 10- or 12-hour shifts.

IHOP in Morristown is seeking a dedicated and energetic Dishwasher/Busser to join our team! As a key member of our restaurant, you will play an essential role in providing a clean and welcoming dining experience for our guests. This position is perfect for individuals who thrive in a fast-paced environment and are committed to maintaining the highest standards of cleanliness and efficiency. Key Responsibilities: Wash and sanitize dishes, utensils, glassware, pots, and pans using commercial dishwashing equipment Maintain cleanliness and organization of the kitchen area, including dish storage and cleaning supplies Assist with food preparation and ingredients as needed, ensuring a smooth workflow for kitchen staff Dispose of waste and recycling in accordance with health and safety regulations Ensure compliance with health and safety standards at all times Set and reset tables according to dining room standards and guest preferences Clear and clean tables after guests have finished dining promptly Maintain cleanliness of the dining area, including floors and restrooms Support the front of house team during busy periods to ensure a positive dining experience for guests. Qualifications: No prior experience required; we are willing to train the right candidate Ability to work in a fast-paced environment and handle multiple tasks efficiently Strong attention to detail and commitment to cleanliness Excellent communication and teamwork skills Availability to work flexible hours including weekends and holidays. Benefits: Paid Vacation Health Insurance Dental Insurance Vision Insurance Flexible Schedules Free Shift Meals Family Discounts On the Job Training Advancement Opportunities Discount Program (includes travel, gyms, cell phones, restaurants, auto purchases, apparel, and electronics) If you are passionate about providing exceptional service and want to be part of a well-loved franchise, we would love to hear from you! Our vision and values are the core of everything we do, and we've found that Team Members who embrace and support these have the greatest opportunity for success at IHOP. IHOP's mission is to spread more joy to more guests, every day. Through research, we found that our guests feel a sense of belonging, togetherness and joy when they dine at IHOP or eat IHOP on the go. We aim to make every guest meal at IHOP feel as comfortable and familiar as dining around their own kitchen table. At IHOP we're masters of the griddle, carefully crafting our menu and each item we create. We ensure that our guests leave with a joyful experience each time they interact with us, by making every moment matter. Our teams go the extra mile to make every meal, experience and interaction memorable. Most importantly, we lead with a joyful attitude to share the positive energy with all of our guests and serve up smiles every day. For more than 65 years, IHOP has been a leader, innovator and expert in all things breakfast, lunch and dinner. As our logo suggests, we hope that the IHOP experience brings a smile to our guests' faces. We strive to ensure that every trip to an IHOP is a memorable one, anchored by delicious food that's shared with great company.

Job Title: Welder-2 Type: Contract to Permanent Contractor Work Model: Onsite Uses hand-welding or flame-cutting to weld metal components or to fill holes, indentations, or seams. Performs duties with a high regard for safety and accuracy. JOB DUTIES/TASKS/RESPONSIBILITIES · Operate safety equipment and use safe and efficient work habits. · Operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, plasma arc, shielded metal arc, resistance welding, and cutting torch. · Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material to ensure conformance with specifications. · Positions, aligns, and secures parts and assemblies prior to assembly, using straight edges, combination squares, calipers, and rulers. · Analyzes shop drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. · Clamps, holds, tack-welds, grinds or bolts component parts to obtain required configurations and positions for welding. · Grinds off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment to smooth out rough edges and maintain safety. · Marks or tags material with proper job number, piece marks, and other identifying marks as required ensuring proper shipment to customers. · Dismantles metal assemblies or cuts scrap metal using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. · Performs daily activities and prioritizes tasks based on written and oral directions from Weld Lead and Manager. · There is no supervision of other workers at this level. · Responsible for the quality of his/her own work and satisfying customer (internal and external) specifications · Must complete process/facility training as assigned · Must be able to work independently and resolve practical problems · Provides training to Weld Technician 1 staff as needed and reviews the work of others as needed · Performs other duties as assigned. MINIMUM EDUCATION, EXPERIENCE AND CERTIFICATION REQUIREMENTS Education · High School diploma or GED Certifications · AWS D1.3 welding certification · Fork lift certification Required Experience · A minimum of 3 years of experience as a Weld Technician Preferred Experience · None preferred REQUIRED AND DESIRED SKILLS · Intermediate knowledge of welding tools · Advanced mechanical knowledge · Basic quality control analysis · Strong listening skills · Basic written, verbal and organizational skills · Strong interpersonal skills and team player attitude · General knowledge of local, state and federal health and safety regulations [e.g., Occupational Safety and Health Administration (OSHA) and Environmental Protection Agency (EPA)] · Ability to understand and apply health and safety regulations and requirements · Demonstrated ability to perform all types of welding · Demonstrated ability to read and understand blueprints and other schematics PHYSICAL/MENTAL REQUIREMENTS AND WORKING CONDITIONS · Ability to perform physically demanding work · Ability to lift up to 50 pounds and wear a respirator · Ability to carry, push, pull up to 50 pounds · Ability to sit, stand, walk, stoop, and kneel · Ability to work in extreme weather conditions and environments wherein there is exposure to noise, dust, grease, smoke, fumes, noxious odors, gases, chemicals and mechanical and electrical hazards · Ability to work in extreme temperatures · Ability to effectively communicate; pass audiogram in hearing conservation program as required by location · Ability to work in or around moving vehicles, rotating equipment, and ladders/scaffolds · Basic math and computer skills; mechanical ability · Ability to wear protective equipment such as: goggles, ear plugs, gloves, and steel toe boots · Normal vision (with or without correction) · Ability to perceive depth and adjust focus; basic hand/eye coordination · Ability to see close and distance, basic colors/shades, and peripheral vision · Forklift certified System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #193-Eng Oakridge (Precision) System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

**About Us** **Job Title:** Multi-Craft Field Welder **Department:** Operations **Reports To:** Multi-Craft Millwright Foreman **FLSA Status:** Non-Exempt **Summary:** At Cherokee Millwright, we are a multi-craft company that focuses on the needs of our customers by providing multi-trades personnel to meet the customer's unique job requests. Therefore, all field employees will be cross-trained in various trades such as millwrighting, pipefitting, welding, sheet metal, civil, etc. The focus of this position will be to plan, lay-out, weld, install and repair all types of metal components according to blueprints, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by supervisor. However, it will not be entirely set to this specific skillset. **Essential Duties and Responsibilities:** Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 1. Laying out pieces to be assembled according to blueprints, schematics or work orders. 2. Using manual/semi-automatic/automatic welding equipment to join, surface, fabricate, and repair parts of metal or other weldable materials. 3. Positioning pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools. 4. Inspecting completed work for conformance to specifications. 5. Performing minor maintenance to equipment. 6. Observing all standard safety practices, and maintaining and completing all required records. 7. Participating in safety committees or initiatives as required. 8. Additional skills in other crafts will be necessary to meet our customers need and will be expected in this role. **Supervisory Responsibilities:** No Supervision. **Qualifications:** Must be able to pass structural and 6G pipe weld test. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Education and/or Experience:** High School diploma or GED equivalent; and Two + years of experience with industrial and commercial applications. **Reasoning Ability:** Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. **Certificates, Licenses, Registrations:** Fork Lift license may be required. **Other Skills and Abilities:** Ability to operate the following equipment: Hydraulic press brake, hydraulic shear, Vulcan plasma cutting table, Pittsburg machine, TDC machine, Roller machine (three types), Hand break, Bead roller machine, Bead forming machine, Stomp shear, Magna bend, Pin spot machine, Drill press, Band saw, Plasma torch, Track torch, Mig and Tig Welders, Overhead Crane, and Forklift. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. **Work Environment:** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is frequently exposed to fumes or airborne particles. The employee is frequently exposed to moving mechanical parts. Additionally, there may be occasional exposure to high, precarious places; toxic or caustic chemicals; risk of electrical shock and vibration. The noise level in the work environment is usually loud. **Other Duties:** Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This would include duties and responsibilities working on, but not limited to millwright, pipefitting, welding, sheet metal, mechanical, and rigging projects. Notice to prospective employees; There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or to other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled. \#cherokee \#LI-JK1 \#LI-ONSITE **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-TN-Morristown_ **ID** _2025-2824_ **Company** _Cherokee Millwright, Inc._ **Category** _Operations Services_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _2 months ago_ _(10/14/2025 4:08 PM)_

Job Title: Multi-Craft Field Welder Department: Operations Reports To: Multi-Craft Millwright Foreman FLSA Status: Non-Exempt Summary: At Cherokee Millwright, we are a multi-craft company that focuses on the needs of our customers by providing multi-trades personnel to meet the customer's unique job requests. Therefore, all field employees will be cross-trained in various trades such as millwrighting, pipefitting, welding, sheet metal, civil, etc. The focus of this position will be to plan, lay-out, weld, install and repair all types of metal components according to blueprints, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by supervisor. However, it will not be entirely set to this specific skillset. Essential Duties and Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Laying out pieces to be assembled according to blueprints, schematics or work orders. Using manual/semi-automatic/automatic welding equipment to join, surface, fabricate, and repair parts of metal or other weldable materials. Positioning pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools. Inspecting completed work for conformance to specifications. Performing minor maintenance to equipment. Observing all standard safety practices, and maintaining and completing all required records. Participating in safety committees or initiatives as required. Additional skills in other crafts will be necessary to meet our customers need and will be expected in this role. Supervisory Responsibilities: No Supervision. Qualifications: Must be able to pass structural and 6G pipe weld test. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: High School diploma or GED equivalent; and Two + years of experience with industrial and commercial applications. Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Certificates, Licenses, Registrations: Fork Lift license may be required. Other Skills and Abilities: Ability to operate the following equipment: Hydraulic press brake, hydraulic shear, Vulcan plasma cutting table, Pittsburg machine, TDC machine, Roller machine (three types), Hand break, Bead roller machine, Bead forming machine, Stomp shear, Magna bend, Pin spot machine, Drill press, Band saw, Plasma torch, Track torch, Mig and Tig Welders, Overhead Crane, and Forklift. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is frequently exposed to fumes or airborne particles. The employee is frequently exposed to moving mechanical parts. Additionally, there may be occasional exposure to high, precarious places; toxic or caustic chemicals; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This would include duties and responsibilities working on, but not limited to millwright, pipefitting, welding, sheet metal, mechanical, and rigging projects. Notice to prospective employees; There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or to other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled. #cherokee #LI-JK1 #LI-ONSITE Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Fort Defiance Industries (FDI) Job Title: TIG Welder Reports to: VP of Operations Job Classification: Non-Exempt Travel Required: None Loudon, TN-based Fort Defiance Industries (FDI) is a growing engineering and manufacturing company. FDI is seeking a TIG Welder to support the production of existing products. Position Summary: The TIG Welder lays out, fits, and TIG welds steel and aluminum components to fabricate frames, pressure vessel, and miscellaneous assemblies according to company specifications performing the following job functions: Key Responsibilities: Analyzes and understands engineering drawings, specifications, and instructions Fits and positions parts in accordance with drawing specification, positions and secures holding devices and tack welds as necessary Prepares weld surfaces by cleaning, brushing, heating as appropriate for the application. Sets up and operates metal arc welding equipment selecting appropriate Sets current, gas pressures, and regulates pressure controls to obtain optimal arc and weld quality Maintain proper torch angle and technique to optimize weld quality Uses care to lay a smooth bead to obtain proper penetration and fusion, avoids burning or distortion of metal, detects defective material, unusual conditions or operating difficulties Cleans and finishes weld surfaces as needed Welds in multiple positions including flat, vertical or horizontal Assists other welders in fitting and positioning parts Maintains equipment and work area in a clean and orderly condition Maintains a continuous improvement mindset and seeks to incorporate best practices to improve weld quality and overall skill set. Other duties and responsibilities as assigned Competencies Attention to detail Reading and understanding visual and written work instructions Communication within a team and between departments Technically minded Innovative/Continuous Improvement mentality Safety oriented Adaptable Can perform tasks with minimal supervision Team player Knowledge of applicable ASME Code Requirements Knowledge of applicable ISO requirements Working Conditions This work is performed in a manufacturing environment with occasional exposure to noise levels up to 110 decibels. The job requires the ability to both sit and stand for long periods of time. The employee will frequently lift and move up to 50 pounds. Physical Abilities Arm-Hand Steadiness: The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position. Manual Dexterity: The ability to quickly move your hand, your hand together with your arm or your two hands to grasp, manipulate , or assembly objects. Near Vision: The ability to see details at close range (within a few feed of the observer). Extent Flexibility: The ability to bend, stretch, twist, or reach with your body arms and/or legs. Information Ordering: The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patters of numbers, letters, words, pictures, mathematical operations). Wrist-Finger Speed: The ability to make fast, simple, repeated movements of the fingers, hands, and wrists. Multilimb Coordination: The ability to coordinate two or more limbs (for example: two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion. Control Precision: The ability to quickly and repeatedly adjust the controls of a machine or to exact positions. Visualization: The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged. Handling and Moving Objects: The ability to using hands, arms and legs in handling, installing, positioning, lifting and moving materials/equipment - up to 50 lbs. Performing General Physical Activities: The ability to perform physical activities that require considerable use of your arms and legs and moving your whole body, such as lifting, balancing, walking, stooping, and handling of materials. Machinery/Equipment/Tools TIG Welder with Foot Pedal Regular use of standard measurement tools Benefits: FDI offers a Great Company Culture, Vacation, Holidays, Medical, Dental, and Vision Insurances along with company provided Life Insurance and Disability Benefits FDI is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. EEO/AA/M/F/disability/veteran

Job Details Experienced Dillsboro, NC Regular $18.00 - $24.00 HourlyJob Posting Date(s) 05/19/2025 01/31/2026Description Division/Department: Operations Job Title: Welder I Reports To: Mechanical Foreman of Motive Power & Operations Manager Type of position: Non-Exempt (Hourly) Employee Classification: Full Time/Regular (benefits-eligible) Compensation: $18 - $24 Location: Dillsboro, NC Benefits Offered: We offer a comprehensive Medical/Rx, Dental, and Vision plan with employer-funded H.S.A. (for qualified employees), company-funded Life AD&D insurance, generous PTO plan, 401K plan with company-match, discounts on merchandise and train vouchers for employees and family. Job Summary: The primary role of the Welder I is to provide support towards the operations and maintenance of the GSMR fleet of passenger and freight cars, the GSMR locomotives and mechanical department inventory. This position will be primarily based out of the Dillsboro yard however, it may include periods of work at other locations on the railroad. The ideal candidate will be a self-motivated individual with the ability to work both individually and in a team environment. Candidates should have a solid understanding and proven ability to work with MIG, TIG and ARC welding processes. A high degree of value will be placed on a candidate's fabrication abilities and ability to weld stainless steel. Applicants for the Welder I position are not expected to hold any certifications however, they may be requested to demonstrate their welding skills during the interview process. Preference will be given to candidates who have any experience working on or in a railroad environment and/or possess any additional trade skills or mechanical abilities. Essential Duties & Responsibilities: Manufacture and repair all necessary parts and components relating to steam and diesel locomotives, historic railroad passenger, and railroad freight cars while working in a dynamic environment with shifting projects and teammates. Fabricate parts and components from scratch, as needed, for a variety of applications and projects. Inspect, evaluate and recommend repair/replacement of rolling stock parts and components Interpret verbal/written instructions and specifications to include reading blue prints while planning and laying out scope of work. Work cross-departmentally with members of the Car Shop, Maintenance of Way and Operations teams. Work Environment: Work primarily in industrial/railroad environment with periods of outdoor work in all weather conditions Must have physical ability and agility sufficient to climb, crawl, stoop and bend in the performance of assigned tasks. Must be comfortable working in confined spaces with limited mobility. Full-time work with a minimum of 40 hours and overtime work, as needed. Regular lifting in excess of 50 pounds. Extended period of time walking and standing. Qualifications Education, Skill & Work Experience Requirements: Proven ability to weld MIG, TIG & ARC. Knowledge of structural welding, specifically running 6010 and 7018 in all positions, strongly preferred. Ability to weld stainless steel holding tanks, a must. Ability to heat, cut, and braze using oxy-acetylene or oxy-propane torches. Ability to operate heavy equipment such as loader, forklift and tractor. Ability to use a basic variety of shop and mechanical tools. Relevant experience working on railroad equipment or track, a plus. Must be able to effectively communicate written and verbally with senior management, supervisors and staff. Willingness to learn new skills specific to historic railroad work including the ability to pour babbitt. Must have a valid driver's license and be able to pass GSMR preemployment drug screening and Physical Capabilities Exam Must be compliance with GSMR, OSHA, FRA and safety procedures and operating rules.

Job DescriptionDescription: Merritt Precision manufactures highly sophisticated plugs for the marine, automotive, and aerospace industries in Merritt Island, Florida and Sweetwater, TN. Merritt Precision, a Correct Craft Company, provides the high level of quality, service, and confidentiality that customers have come to expect. Through expanded capacity and new technologies, Merritt Precision is helping create a better tomorrow today. Summary: This is a critical position in the production of our high quality molds. Working in our team environment is key, and successful candidates must have an eye for detail. We are seeking a highly skilled Welding Technician to join our team. The Welding Technician will fabricate and weld aluminum, stainless steel and mild steel to form parts in our production process. Key Responsibilities Fabricates and welds tubing and mild steel to form parts used in the production process. Cut metal components to size, perform processes to finish metal parts Requirements: Essential: Be able to drive a forklift when necessary Must be able to work in non climate controlled environment where ambient air temperature can exceed outside air temperature Be able to stand for extended periods of time while performing job duties Must be able to wear proper safety equipment when necessary Must be able to lift 40 pounds when necessary Be able to read and understand blueprints Ability to Read and Fabricate products from design or specification documents Experience with design and layout patterns Positive attitude and strong work ethic and ability to work with a team Math skills for accurate measuring and design of products/solutions Preferred: Working knowledge of metalworking machinery (Press Brake, Roller, Acetylene Torch, Metal Shear, Drill Press, Metal Lathe, Band Saw, etc.) a plus WHY APPLY: Opportunity to take your career to the next level Work for a company that values people, performance and philanthropy Join a team that is passionate about making a difference in the world Competitive benefits: Health, Dental, Vision & Life Insurance 401K Plan Paid Holidays Paid Time Off Incentive Plan All your information will be kept confidential according to EEO guidelines

Description: Job Title: Aluminum Welder Classification: Non-Exempt Reports to: Production Supervisor Job Purpose: A machine shop welder plays a crucial role in the manufacturing and fabrication industries. The primary purpose of a Machine Shop Welder is to join metal parts together using various welding techniques, ensuring the structural integrity and quality of the final product. The most successful candidate is a mechanically inclined individual that can weld a variety of parts and work independently as well as on a team. Key Responsibilities: Reading and interpreting blueprints and technical drawings Measuring and cutting metal components Welding metal parts Inspecting and testing welds Maintaining welding equipment Must comply with all OSHA and safety procedures Required Skills/Abilities: AWS (American Welding Society) certification preferred. Tube and Tank welding experience preferred. MIG/TIG welding for aluminum. Able to drive a forklift when necessary. Ability to read and fabricate products from design or specification documents. Mechanical skills. Math skills for accurate measuring and design of products/solutions Ability to perform tasks under time pressure deadlines. Ability to understand and follow verbal and written instructions. Internal weld test required. Education and Experience: High School Diploma or equivalent level of training Working knowledge of metalworking machinery (Acetylene Torch, Metal Shear, Roller, Press Brake, etc.) a plus. Minimum 3-5 years of welding experience, with at least 2 years specializing in aluminum using TIG and MIG methods in a manufacturing setting. One or more years of experience in general labor. Physical Requirements: Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. Must be able to bend at waist and knees and stand for extended periods of time. Must be able to climb into and out of the interior of boats. Must be able to lift 50 pounds when necessary. Be able to drive a forklift when necessary. Be able to read and understand blueprints. Keep work area clean and orderly. This is a safety-sensitive position. Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to weather conditions, a normal office environment or factory environment that is not climate controlled. The noise level in the work environment is usually moderate. The factory in certain areas maintains a high fiberglass and dust environment. Personal Protective Equipment might be required in certain areas of the factory including but not limited to safety glasses, respirator, hearing protection, gloves, and protective garments. Employees in safety-sensitive positions must report to work fit for duty and must remain fit for duty throughout their workday. To be fit for duty, the employee must not be impaired by alcohol, illicit drugs, or medication. Equal Employment Opportunity Employer Revel Boats, LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Revel Boats LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Revel Boats, LLC expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Revel Boats, LLC employees to perform their job duties may result in discipline up to and including discharge. By signing this job description, you understand your job tasks and responsibilities. According to the Revel Boats, LLC policy employees are not eligible for transfer until completion of one year of employment unless initiated by the Company. ______________________________ ______________________________ Employee Signature Date _______________________________ _______________________________ Manager Signature Date Requirements:

Job Description We're looking for highly skilled, precision-oriented welders to join a specialized contract team working on complex fabrication projects in a clean, high-spec manufacturing environment. This is a 12-week contract role (W2) with strong potential for full-time hire based on performance, reliability, and craftsmanship. You'll be part of a tight-knit, quality-driven production team supporting a range of high-purity process systems, pressure vessels, and stainless piping assemblies. From TIG welding on sanitary-grade stainless to heavy MIG fabrication and orbital welds on pipe spools, your work will directly contribute to systems used in critical industrial, medical, and commercial applications around the world. This is a great fit for welders who take pride in doing it right the first time, thrive in structured environments, and want to be part of a team that values safety, skill, and attention to detail. All candidates will complete a hands-on weld test prior to start. Pay & Benefits Full-Time $32 - $40 /hr Medical, Dental, Vision, 401k, Paid Leave, Personal Leave and Sick Leave Contract 12 week contract W2 employee with full benefits from day 1 Strong ability to transition to full time employee based on performance Shift & Schedule Monday - Thursday 6:00am - 4:30pm OT may be required on Friday's 6:00am - 2:30pm Responsibilities Fit, prep, and install stainless steel process piping from blueprints, isometric drawings, and P&IDs Perform precision TIG welding on sanitary and industrial pipe (primarily stainless steel, occasional carbon) Execute layout, cutting, tacking, and fit-up of complex piping runs with minimal supervision Ensure welds meet internal quality and high-purity cleanliness standards (sanitary or orbital TIG where required) Use measurement tools (e.g., tape measures, levels, squares) to maintain tight tolerances and proper slope/fall Coordinate with mechanical team to complete full system builds (skids, racks, pump packages, etc.) Use material handling equipment (forklifts, overhead cranes, carts) to move and stage pipe and components Maintain a clean, organized, and safe work area in line with manufacturing and industry standards Support project throughput and team goals by meeting production schedules and upholding quality targets Participate in safety and process improvement efforts; uphold all QA/QC protocols and inspection criteria Requirements Qualifications 3+ years of experience in MIG, TIG, combination, and orbital welding in a manufacturing or industrial environment Proficiency welding stainless steel and carbon steel with minimal supervision Strong blueprint reading and weld symbol interpretation skills Comfortable with precision fabrication for tanks, skids, piping systems, and pressure vessels Able to pass a hands-on weld test for MIG, TIG, and orbital welding prior to assignment Skilled in use of grinders, torches, saws, and other shop tools Familiar with rigging, overhead crane operation, and material handling protocols Excellent attention to detail, consistency, and quality High school diploma or GED required; technical certifications or combination welder diploma preferred U.S. Citizenship required Willing to work overtime when required, including some Fridays Benefits Benefits: 401(k) matching Dental insurance Health insurance Health savings account Paid time off Retirement plan Vision insurance

Job DescriptionWelding Job at small fabrication shop $20-25 an hour. Must take Weld Test and have own hood and gloves. Experience Required. Come to Wise Staffing 4617 Papermill Drive Knoxville

CALLING ALL EXPERIENCED FLUX AND MIG WELDERS FOR 2ND SHIFT WORKING MONDAY THRU THURSDAY - 5P - 3A PAID WEEKLY ONCE HIRED COMPANY HAS FULL BENEFIT PACKAGE APPLY IN PERSON TODAY! KNOXVILLE STAFFING 2115 MIDDLEBROOK PK KNOXVILLE TN BRING YOUR WELDING HOOD! TEST SET UP IMMEDIATELY FOLLOWING dena@knoxvillestaffing.com

Job Title: Aluminum Welder Classification: Non-Exempt Reports to: Production Supervisor Job Purpose: A machine shop welder plays a crucial role in the manufacturing and fabrication industries. The primary purpose of a Machine Shop Welder is to join metal parts together using various welding techniques, ensuring the structural integrity and quality of the final product. The most successful candidate is a mechanically inclined individual that can weld a variety of parts and work independently as well as on a team. Key Responsibilities: Reading and interpreting blueprints and technical drawings Measuring and cutting metal components Welding metal parts Inspecting and testing welds Maintaining welding equipment Must comply with all OSHA and safety procedures Required Skills/Abilities: AWS (American Welding Society) certification preferred. Tube and Tank welding experience preferred. MIG/TIG welding for aluminum. Able to drive a forklift when necessary. Ability to read and fabricate products from design or specification documents. Mechanical skills. Math skills for accurate measuring and design of products/solutions Ability to perform tasks under time pressure deadlines. Ability to understand and follow verbal and written instructions. Internal weld test required. Education and Experience: High School Diploma or equivalent level of training Working knowledge of metalworking machinery (Acetylene Torch, Metal Shear, Roller, Press Brake, etc.) a plus. Minimum 3-5 years of welding experience, with at least 2 years specializing in aluminum using TIG and MIG methods in a manufacturing setting. One or more years of experience in general labor. Physical Requirements: Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. Must be able to bend at waist and knees and stand for extended periods of time. Must be able to climb into and out of the interior of boats. Must be able to lift 50 pounds when necessary. Be able to drive a forklift when necessary. Be able to read and understand blueprints. Keep work area clean and orderly. This is a safety-sensitive position. Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to weather conditions, a normal office environment or factory environment that is not climate controlled. The noise level in the work environment is usually moderate. The factory in certain areas maintains a high fiberglass and dust environment. Personal Protective Equipment might be required in certain areas of the factory including but not limited to safety glasses, respirator, hearing protection, gloves, and protective garments. Employees in safety-sensitive positions must report to work fit for duty and must remain fit for duty throughout their workday. To be fit for duty, the employee must not be impaired by alcohol, illicit drugs, or medication. Equal Employment Opportunity Employer Revel Boats, LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Revel Boats LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Revel Boats, LLC expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Revel Boats, LLC employees to perform their job duties may result in discipline up to and including discharge. By signing this job description, you understand your job tasks and responsibilities. According to the Revel Boats, LLC policy employees are not eligible for transfer until completion of one year of employment unless initiated by the Company. ______________________________ ______________________________ Employee Signature Date _______________________________ _______________________________ Manager Signature Date