Welder jobs in Lake Charles, LA - 1,189 jobs

Job Description CDR General Services is seeking an Aluminum Welder near Franklin, LA to perform high-quality aluminum welding for marine applications. This role requires advanced welding skills, attention to detail, and the ability to meet strict quality standards in all positions.Job Details Job Type: Full-Time Job Location: Franklin, LA Pay Rates: $29 to $33 per hour Schedule: Monday to Friday, 6:00 A.M. - 5:00 P.M. Potential Overtime: Weekdays and WeekendsKey Responsibilities Perform aluminum welding in all positions (uphill, overhead, horizontal, pipe, and flat). Read and interpret blueprints accurately. Tack weld, distribute heat evenly, and produce clean, high-quality welds. Pass MSB Pre-Employment Mock Weld Test and maintain compliance with company standards. Repair defective welds and ensure consistent quality. Operate power equipment safely and follow all safety protocols. Maintain strong attention to detail to support quality assurance requirements. Accurately measure materials using a tape measure. Collaborate effectively with team members and demonstrate strong communication skills. Pass required weld tests for seam welder and top seam welder pay, including: 3G-4G structure plate bend test. MSB 3G-4G groove test and 1G-2mm plate test per Metal Shark WPS. MSB 3G and 4G-4mm plate test per Metal Shark WPS. Provide consistent quality welds daily to maintain seam/top welder pay. Qualifications 3-5 years of experience in the ship/boat building industry welding aluminum. Ability to pass all required weld tests as outlined above. Excellent math skills and ability to read a tape measure accurately. Strong work ethic, communication skills, and ability to work well in a team. Physical ability to lift up to 50 lbs., stand, bend, stoop, squat, kneel, and climb stairs/ladders regularly.

Job DescriptionWelder Constructs and or repairs metal products either manually or by machine II. RESPONSIBILITIES: Welds a range of metals including but not limited to mild steel, stainless steel, cast iron, aluminum, copper, brass, die cast, chrome metal. Aware of safety regulations and must wear protective equipment to minimize heat and noise levels, and to guard against corrosive chemicals. Ability to read Blueprints and weld maps preferred. Ability to have all welds pass with QA/QC approval. Proper placement of stencils. Ability to follow all the Fabrication guidelines. III. MINIMUM QUALIFICATIONS: Pass a Weld Qualification Test Provide your own personal tool in a lockable toolbox Available for short - term travel IV. REPORTING REQUIREMENTS: High School Education or equivalent Possess a valid driver's license V. PHYSICAL REQUIREMENTS: Ability to lift, carry or otherwise move and position objects and materials weighing up to 50 lbs. Ability to stand, walk or otherwise move around on a continuous basis.

SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Lays out, fabricates, assembles, installs and maintains piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment for steam, hot water fixtures and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and production and processing systems. RESPONSIBILITIES - Selects type and size of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications. - Inspects worksite to determine presence of obstructions. - Plans sequence on installation to avoid obstructions and activities of other workers. - Cuts pipe using hacksaw, pipe cutter, hammer and chisel, cutting torch and pipe cutting machine. - Threads pipe using threading machine. - Bends pipe by hand or with pipe-bending tools and machine. - Mounts pipe hangers and brackets on walls and ceiling to hold pipe. - Assembles and installs a variety of metal or nonmetal pipes and pipe fittings, using threaded caulked, soldering, brazen, fused, or cemented joints, and hand tools. - Secures pipes to structure with bracket, clamps, and hangers, using hand and power tools. - Installs and maintains refrigeration and air conditioning systems, including compressors, pumps, meter, pneumatic and hydraulic controls and piping, - Test piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks. - Welds pipe supports to structural steel members. - May observe production machines in assigned area of manufacturing facility to detect machinery malfunctions. May operate machinery to verify repair. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of material and work pieces during installation. - Performs minor maintenance of cleaning activities of tools and equipment. - Respiratory protection is common and may be required. - Responsible for observing and complying with all safety and project rules. Perform other duties as required.

ABOUT THE TEPA COMPANIES Established in 2005 and owned by the Paskenta Band of Nomlaki Indians, The Tepa Companies deliver comprehensive and sustainable solutions to federal, state, local, and private-sector clients throughout the United States. The tribally owned companies work independently and collaboratively to provide wide-ranging construction, engineering, environmental, industrial, staffing, and technology services. When you join Tepa Companies, you have the opportunity to expand your entrepreneurial skill set while growing professionally alongside the best in the industry. You will have the opportunity to impact your team, the organization as a whole, and subsequently, our Tribe. We seek out top talent to provide the best services for our clients. We focus on being a responsible company for our employees and their families by creating a culture that reflects our core values and offering competitive pay and benefits package. Our benefits package includes comprehensive medical, dental, vision, generous paid time off and holidays, 401(k) plan with company match, life insurance, flexible spending and health savings account, mental health support and resources, short and long-term disability, and tuition reimbursement. LOCATION: This is a nationwide traveling position requiring frequent travel to project sites across the United States. Per diem will be provided. ABOUT THE JOB The Tepa Companies are seeking a Welding Apprentice who will Perform welding tasks under supervision on piping and plate within petroleum operations facilities. In addition to welding, the successful candidate must be able to assist in tasks related to welding such as fit‐up, preparation, repair, inspection, and post weld preparation. As required, the Apprentice Welder will also be tasked to assist with general site work such as loading and unloading equipment and materials, site clean‐up and preparation, mobilization, and demobilization to and from the jobsite, scaffolding erection, general tank construction tasks and other duties as assigned. This role is intended for May 2026 college graduates who majored in an applicable field. As Tepa continues to grow, we are focusing on hiring recent graduates to begin their careers at our organization with opportunities to receive hands-on learning, mentorship, and growth within the company. This is an entry-level position that does not require previous experience but does require completed education in the particular discipline. Job Functions: * Follow welding procedure specifications when welding * Train and assist with performing quality welds able to pass radiographic examination * Train and assist with performing quality welds using various welding process, such as TIG, GMAW, SMAW, FCAW, etc. * Train and assist with producing quality welds with efficiency * Train to perform or assist with fit‐up and preparation of welds * Perform or assist with post weld cleanup, inspection, and repair * Communicate regularly with the Field Foreman regarding issues and concerns on the job site * Train to determine the required tools, materials and welding methods based on the project specifications * Assist with the assembly, installation, and repair of pipe components and systems according to specifications * Inspect all materials, equipment, and tools required to perform the work * Maintain supplies, equipment, and tools * Properly prepare materials by clamping, cutting, or applying chemical solutions to piping * Observe all safety regulations WHAT WE'RE LOOKING FOR * High School diploma or GED * Formal vocational/technical training in GTAW- Gas tungsten arc welding and basic welding processes/procedures * Must be graduating in 2026 from vocational training (May/June graduates preferred) * Must be able to pass a multi-position weld test utilizing the SMAW process * Must be able to pass 2 and 3G plate welding tests * Must be able to perform stick welds on both carbon and stainless-steel plate and pipe * Must be able to utilize large weld rods (3/16" minimum) in multi-positions in an effective and efficient manner * Ability to learn to read and interpret blueprints, schematics, and written instructions * Must have a general knowledge of AWS, API, ANSI, and ASME codes and standards * Must be able to troubleshoot and have a strong attention to detail * Must have physical dexterity * Must be able to follow verbal directions * Must be able to read and write in English * Must be willing to travel for long durations * Must be able to pass a background check required to access US military installations * Must have a valid driver's license Equal Opportunity Employer Veterans

Industrial Air Flow Dynamics, Inc. is now hiring for our Spring Season! (March - June) We've Got the Gear, the Travel, and the Pay - Just Bring the Skill At Industrial Air Flow Dynamics, Inc., we know great welders don't just need a paycheck, they need support. That's why we supply all the tools and PPE required for each job, cover your travel and hotel, pay you for passing your weld test, and even reward you for bringing your friends along. When you work with us, you're not just another name on a roster. You're part of the crew that keeps America's power plants running. We're hiring experienced Stainless Steel Structural Welders (Flux-Core Process) for long term, nationwide turnaround work. If you're dependable, driven, and ready to get paid to travel, read on. Why Weld with Us? Tools & PPE Provided - No need to haul your gear. We've got it covered. Travel Covered - We pay your airfare and provide shared hotel accommodations. Daily Per Diem - $30/day to cover meals and incidentals. Referral Bonuses - Know someone who's got what it takes? Get paid when we hire them. Fair Pay - $25/hour + $15/hour paid while you travel time to the project The Job You'll travel across the U.S. to power plant sites, welding stainless steel structural components using the Flux-Core process (309 wire on ½" carbon plate). You'll read and work from detailed blueprints, and perform 2G, 3G, and 4G welds in all positions including overhead and vertical, in high-pressure, physically demanding environments like boilers and scaffolding systems. What We're Looking For 3+ years of industrial welding experience Ability to pass bend-tested welds: 2G, 3G, and 4G (Flux-Core, 309 wire) Comfortable working at heights and in tight, hot spaces Willing to travel continuously nationwide Strong work ethic, blueprint reading skills, and commitment to safety Pay & Benefits $25/hour base pay + $15/hour travel pay + $30/day per diem Paid airfare + hotel accommodations Rental car provided (must have valid driver's license) Referral bonuses when your referrals get hired Full Benefits Package Includes: Safe Harbor 401(k) Medical, Dental & Vision coverage Life, AD&D, Short & Long-Term Disability options Quick, No-Nonsense Hiring Process Our application is simple and fast. No long forms, no fluff. Just tell us who you are, where you've worked, and how to reach you. If it's a match, we'll reach out from an 281 area code. Next Steps: Phone screening Weld test (with clear instructions) Drug Test If you're a skilled welder who wants to travel the country, earn great pay, and work with a team that has your back, this is your chance. Apply now and bring your skills to the job. We'll handle the rest!

Venture Dynamics is hiring skilled aluminum welders for long term permanent employment in New Orleans, LA. ASK ABOUT THE 1,500.00 sign on bonus!! We are seeking a skilled and experienced Welder to join our fabrication team. The ideal candidate will be proficient in various welding techniques, have a solid understanding of sheet metal fabrication, and be able to interpret blueprints and schematics. The Welder will be responsible for welding, fabricating, and assembling metal products, as well as ensuring compliance with relevant codes and standards. Duties - Weld metal parts together using stick welding techniques. - Interpret blueprints and schematics to determine the correct welding procedure. - Fabricate sheet metal products using various fabrication techniques, including plasma cutting and press brake machine operation. - Assemble metal products using a variety of welding and fabrication methods. - Ensure that all work meets quality and safety standards. - Operate a plasma cutting machine to cut metal sheets and tubes according to specifications. - Maintain a clean and organized work area, adhering to all safety protocols. - Conduct routine maintenance on equipment and machinery. - Collaborate with other team members to ensure efficient and effective production processes. Experience - Proven experience in welding and fabrication, with a focus on sheet metal products. - Familiarity with welding codes and standards. - Knowledge of press brake machine operation and plasma cutting techniques. - Ability to read and interpret blueprints and schematics. - Experience with ductwork fabrication and installation. - A strong understanding of safety protocols and procedures. - Ability to work in a fast-paced environment and meet production deadlines. - Physical stamina and ability to lift and maneuver heavy metal products. Job Type: Full-time Pay: $25.50 - $28.75 per hour Expected hours: 40 - 60 per week Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Shift: 10 hour shift Experience: Welding: 4 years (Required) Ability to Commute: New Orleans, LA 70129 (Preferred) Ability to Relocate: New Orleans, LA 70129: Relocate before starting work (Required) Work Location: In person View all jobs at this company

Job Description Role Title: 1st Class Flux core Welder Employment Type: Full Time Shift: Days Job Summary: We are seeking experienced 1st Class Flux core Welders for a Shipyard that does outside New Construction work in Houma. Candidates must be willing to work 40 to 50 hours. All welders will have to pass a Flux core welders' test. Key Requirements Must Have ·Must pass a drug screen. ·Minimum 3 years of experience as a Flux core Welder. ·tools for welding Preferred Qualifications ·Experience with industrial or Fabrication shop welding. ·Strong knowledge of welding safety procedures. ·Proven reliability and consistent attendance. ·Experience working indoor and outdoor welding environment.

Integrity has an exciting opportunity to for an Aluminum Welder in New Orleans, LA. This is a long-term contract that offers Per Diem! About This Role Requires 1-3 years of aluminum welding experience in all positions, specifically using GTAW (Tig Welding) process. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding. Climbing on and over bulkheads, up and down ladders, etc. Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line) Lifting of material and tools (jacks, porta-powers, come-a longs, etc). Also loading and unloading of parts. Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner Walking on tops of frames and tees (uneven walking surfaces) Qualifications Prefers aluminum welding certificate from recent experience. Level will be determined based on relevant experience, scope of role, skills, etc Education Requirements: Must have high school diploma, GED or equivalent certificate, or bronze level (or higher) for ACT WorkKeys Certification. Schedule: Monday-Thursday: 5:30am-4pm #I08

Job Description Combo Welders/Inconel Work Schedule: 5 x 10'x, Monday through Friday, 6:00AM - 4:30PM (could go to 6 x 10's). Duration: 4 months. Scope: Welding of carbon steel piping, chrome, and stainless-steel piping. Modularized furnace piping. Some laydown area welds, with most being elevated work.

Job DescriptionJob Title: Class 1 Welder Job Type: Full-Time Pay Range: $24/hr + $100 per diem We are seeking experienced Class 1 Welders for full-time positions in Jeanerette, LA. This role involves welding aluminum in a ship/boat building environment. Candidates must be proficient in reading blueprints, welding in multiple positions, and adhering to safety and quality standards. Hours: Monday-Friday, 6:00 A.M. - 5:00 P.M. (40 hours per week) Potential for overtime on weekdays and weekends Education or Required Experience: 3 to 5 years of experience in the ship/boat building industry welding aluminum Must be able to read blueprints Must be able to tack, distribute heat evenly, and lay a clean bead Must be able to pass a Pre-Employment Mock Weld Test Required Skills: Strong attention to detail to support a high-quality assurance program Excellent math skills and ability to read a tape measure accurately Proficient in either fitting or welding aluminum Ability to repair defective welds Ability to weld in all positions (uphill, downhill, horizontal, pipe, or flat) Safe operation of power equipment in compliance with safety standards Strong work ethic Ability to operate power tools (grinders, saws, drills, etc.) Good communication skills and ability to work well in a team Physical Requirements: Must be able to lift up to 50 lbs Must be able to stand, bend, stoop, squat, or kneel regularly Must be able to climb stairs and ladders as needed to perform tasks Ameri-Force Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes:• Industry Leading Pay • Medical Coverage • Dental Coverage • Vision Coverage • Short Term Disability Benefits • Term Life Benefits • Referral Bonuses Referral Bonuses are available for specific jobs only About Ameri-Force Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker's compensation. In addition, we offer a comprehensive benefits package, including medical, dental, vision, short-term disability, and life insurance, tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Learn more at ameriforce.com Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law.

YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys Must be able to pass aluminum welding certification tests Performs related tasks such as thermal cutting and grinding Repairs broken or cracked parts, fills holes, and increases size of metal parts Locates and repairs cracks in products and equipment Maintains clean work area Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears Determines layouts and welds parts and assemblies according to engineering drawings and specifications May monitor and verify quality in accordance with statistical process or other control procedures Trains less experienced employees to build quality products within the time standard Participates in continuous improvement meetings, and shares knowledge for improvement actions Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation Interacts with employees and managers across the company May need to operate a vehicle or forklift Work done with minimal supervision Work may be done without established procedures Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Must know shop mathematics through geometry Ability to read and interpret complex prints Good eye/hand coordination Basic computer skills Must have the ability to follow written and verbal instructions Must have the ability to follow safety practices Basic problem-solving skills Ability to learn how to use necessary computer tools Visual attention to detail Reliable hand strength and manual dexterity Three (3) years directly related work experience or two (2) years of concentrated welding training. High school Diploma or GED required, AA in welding. Able to lift to a maximum of 25-40 lbs. Able to sit/stand for long periods of time. Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

←Back to all jobs at TREO STAFFING LLC Aluminum Pulse Welders - Must have a minimum of 6 months of Aluminum (GMAW-P) welding experience - Must successfully demonstrate the ability to pass a hands-on 3G/4G aluminum (GMAW-P) pulse welding test with the 3G position uphill progression and 4G entirely in the overhead position. - Must pass pre employment medicals to include: Drug Screen, Audiogram, Respirator FIT and PFT - Must be clean shaven for testing - Must have reliable transportation to and from work daily LONG TERM Positions Please visit our careers page to see more job opportunities.

Job Description Aluminum Pulse Welder The Aluminum Pulse Welder welds together structural metal components as specified in blueprints, work orders or oral instructions. Key Responsibilities: Obtains the appropriate tools needed for a particular job and subsequently sets up their equipment. Binds together structural metal components that have been pre-assembled and tacked into place. Performs good, cosmetic sound welds. Examines his/her work and may chip off excess weld, slag, and splatter with the appropriate tools. (i.e. grinder, chipping hammer, etc.). Leaves little to no rework when the job is complete. (i.e. cold rolls, pin holes, wraps, burn throughs, etc.). Troubleshoots his/her equipment. May gouge/grind to remove a member, make a seam sound, remove weld reinforcement, etc. Must be able to work in confined spaces. Must be able to work to work/climb in elevations greater than 5". Must be able to wear/work a respirator when applicable. Qualifications: Certified in 3G and 4G in at least 3 or more of the following disciplines preferred: flux core, short arc, aluminum, aluminum heliarc, stainless steel, carbon-to-stainless steel, and submerged arc. Able to make a full penetration weld that will pass NDE Testing. (i.e. x-ray, ultrasound, magnetic particles, dye penetrant). Able to lay out track marks. Able to identify most used welding symbols. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity. Powered by ExactHire:184506

(Franklin, LA): Flexicrew Technical Services (FTS) is seeking a Welders with Aluminum experience to support shipyard fabrication, new construction, and repair operations. This role requires a high level of technical welding proficiency, strong safety awareness, and the ability to work collaboratively in a fast-paced production environment. Essential Duties: • Read, interpret, and follow blueprints, sketches, weld symbols, and project specifications. • Perform welding using SMAW (Stick), GMAW (MIG), FCAW (Flux Core), and GMAW-P processes in 3G and 4G positions. • Complete stainless steel, Cupro-Nickel, and carbon steel pipe welds (6G). • Conduct weld fit-up, tacking, and preparation of work surfaces by grinding, cutting, and cleaning. • Perform structural welding on ship components such as hulls, decks, bulkheads, frames, and foundations. • Execute grinding, cutting, torching, and pick-up work as needed to support fabrication tasks. • Inspect completed welds to ensure conformance with specifications and correct any defects. • Perform daily inspection and routine maintenance on welding equipment, tools, and PPE. • Work in various welding positions, including overhead, vertical, flat, and within tight or elevated spaces. • Collaborate with welders, fitters, pipefitters, electricians, and additional trades to support efficient workflow. • Assist in mentoring and developing junior welders. • Maintain a clean and safe work environment and follow all safety, fire-prevention, and confined-space protocols. • Represent FTS professionally with a positive and safety-focused attitude. • Meet welding performance standards required for NDT (Non-Destructive Testing) and applicable classification society requirements. Requirements/Skills: • Strong understanding of weld symbols, blueprint reading, and fabrication drawings. • Thorough knowledge of various metals, their characteristics, and the appropriate welding processes. • Ability to inspect and self-assess quality of welds to ensure compliance with industry standards. • Proficient in structural and pipe welding (6G) for carbon steel, stainless steel, aluminum, and Cupro-Nickel. • Skilled in the proper use of welding tools, gauges, torches, grinders, and measuring equipment. • Ability to work independently or as part of a team in a high-paced shipyard environment. • Strong communication and collaboration skills. • Commitment to safety, including PPE use, hazard mitigation, and safe work practices. Physical Requirements: • Ability to work in tight, enclosed, elevated, or awkward positions as required. • Ability to lift, carry, push, and pull materials and equipment up to 50 lbs. • Ability to stand, bend, climb, kneel, and work for extended periods. • Ability to work in varying environmental conditions including heat, noise, and confined spaces. • Ability to wear required PPE including welding hoods, gloves, respirators (if needed), and protective clothing. Equal Opportunity Statement: Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

Your Job The jobsite located in Vidor, TX has an opening for a Structural Welder . Our Team Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in the natural gas, natural gas liquids, and petrochemical industries. OPD is part of the larger Koch Engineered Solutions (KES) organization which provides a variety of capabilities across many industries. Originally incorporated in 1980, OPD has developed a strong reputation for honesty, integrity, and ability to successfully execute projects. OPD has a key advantage in being able to supply construction services as well as engineering/procurement. This enables clients to have a ''one stop shop'' for the overall project, providing increased efficiency and avoiding potential interface problems. OPD's industry experience, flexibility, and personal attention have made us a preferred partner to our customers and our tight knit, highly productive, team atmosphere makes OPD a great place to work. What You Will Do Core responsibilities for a Structural Welder include: Must own portable welding rig including PPE and jack stands. Weld skids, structural steel and related equipment according to specifications. Read drawings and recognize basic symbols for the job application. Operate tools and equipment including: angle grinders, beveling machines, cut-off grinders, hammers, tape measure, levels and torches (oxygen/acetylene & plasma). Possess skilled knowledge of welding, and welding process required (GMAW and/or SMAW). Exhibit knowledge of material identification, equipment utilization, welder equipment set-up and maintenance. Must be able to work with minimal supervision. Ability to work safely and accurately. We expect all field employees to: Actively participate in a strong safety culture. Recognize safety hazards and risks. Participate in onsite safety meetings. Follow OPD and client safety policies and procedures. Be aware of changing conditions on an active jobsite. Be on time to the jobsite each day ready for work. Display a positive attitude and can work in a team environment. Some physical demands of being a Structural Welder include: Capable of working in outdoor weather and environmental conditions including extreme heat and humidity, extreme cold, and high elevations. Lifting and carrying awkward objects up to 60 lbs. Standing for extended periods of time up to 11 hours per day. Moving the entire body. Considerable use of arms, legs, climbing, lifting, balancing, walking, stooping, crawling, twisting, reaching, and bending on a regular basis. Must be able to work on elevated platforms and maintain balance when stepping on narrow platforms such as beams and pipes. Must be able to perform these activities while wearing an approved full-body harness and lanyard. Use hands to handle, control, and feel objects and/or tools. Who You Are (Basic Qualifications) At least 2 years of structural welding experience. Must be able to read, write & communicate in English. Must own the necessary tools to perform the welding and fabrication of structural steel. Must be able to pass code welding test: ASME Section IX 6G pipe test (SMAW and GTAW) and AWS D1.1 plate test for structural welds (SMAW and/or GMAW). Must demonstrate the ability to produce welds that are visually acceptable per the construction code i.e. ASME B 31.3. Must maintain your equipment in a condition that does not compromise safety or the environment. Must be able to work shifts up to 12 hours per day and 7 days per week. Must be able to meet all physical demands of the job. Must be able and willing to attend mandatory safety meetings. Must be a safety role model. What Will Put You Ahead 5 or more years of experience as a structural welder and fabricator. Previous experience in a gas plant construction environment Strong interpersonal skills. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here . Who We Are As a Koch Engineered Solutions company, Optimized Process Designs (OPD) provides clients with detailed engineering packages in all disciplines, single-point procurement for all equipment and materials, fabrication and direct-hired construction services throughout the United States. We leverage in-house capabilities and provide services with faster speed to market to help deliver increased cost savings while minimizing risk. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please visit the following website for additional information: ******************************************

We're looking for Welders with aluminum welding experience who are excited to grow their careers while supporting critical energy infrastructure projects across the U.S. This hands-on field role offers the opportunity to work on a wide variety of job sites, including power plants, hydroelectric dams, and large-scale industrial facilities. You'll focus on systems such as Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers. You will be part of a fast-growing team that takes pride in safety, quality, and craftsmanship. What You'll Do: Weld aluminum components in multiple positions (vertical, horizontal, overhead - 6G test required) Read and interpret construction, welding, and electrical drawings Rig, lift, align, and set electrical bus duct equipment based on plans and specifications Demo, fit, and install new mechanical components as part of system upgrades Maintain tools and welding equipment in a safe, working condition Conduct safety checks and inspections; identify and address wear, defects, and deterioration Operate electrical testing equipment, including Hi-Pot, Ductor, and Megger Work effectively alongside field technicians, project teams, and other trades Complete daily job reports and timesheets Operate company vehicles and follow RMS Energy's safety and driving policies Follow strict safety and PPE usage protocols due to noise, electrical hazards, and elevated work areas Take initiative and work independently with minimal supervision The Experience We're Looking For: 3+ years of aluminum welding experience (MIG required, TIG preferred) Familiarity with medium and high voltage electrical equipment Ability to read and interpret technical drawings and field documentation Knowledge of OSHA safety standards, including PPE use and working at heights Experience with substation construction or electrical bus installation is preferred Proficient in operating forklifts, manlifts, and other field equipment Additional Requirements: Willingness to travel up to 75% across the continental U.S. High school diploma or GED required Valid driver's license with a history of safe and responsible driving Must pass a background check and drug/alcohol screening Legally authorized to work in the United States Available for extended and irregular hours as needed Able to work outdoors in all weather, at heights (100+ ft), in confined spaces, and around high-voltage equipment and heavy machinery Physically capable of lifting 50+ lbs and enduring extended physical activity Requires good vision, hearing, and English proficiency for safe, effective communication in noisy environments Bonus Points for: Completion of a trade school program, technical college, associate degree, or skilled trade certification in welding or a related field is strongly preferred TWIC Card CDL License Prior experience working with Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers Why Join RMS Energy: We're not just another power services company. We're a tight-knit, mission-driven team that values safety, teamwork, innovation, and continuous growth. Competitive Compensation - Overtime potential and merit-based raises Full Benefits - Medical, dental, and vision coverage fully paid for employees, starting the month after hire Steady Employment & Career Growth - Be part of a fast-growing company with promotion potential 401(k) with Company Match - Traditional & Roth options + free investment guidance Top-Tier Equipment - Provided to support you in the field Compensated Travel Time plus Per Diem - Earn while seeing new places Education Support - Paid training, certifications, and industry memberships Generous PTO - Paid vacation, holidays, and sick leave Employee Assistance Program - Legal, financial, and mental wellness support Want to be part of something meaningful? Apply today and join a team where People, Purpose, and Power come together - your future starts here. RMS Energy is an Equal Opportunity Employer. We believe diverse teams drive better outcomes, and we're committed to creating an inclusive environment where all employees feel valued and empowered. For more information about RMS Energy, please visit ******************

YOUR DAY TO DAY: To set-up, maintain, and perform a limited number of welding processes working with prints, specification sheets, and verbal instructions on generally routine production items under minimal supervision. Machine and Equipment Used: Hand tools, electric and gas welding equipment. YOU WILL BE ACCOUNTABLE FOR: * Welds aluminum metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, and plant equipment * Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys * Performs welding processes on aluminum parts and assemblies to required tolerances using welding metals and metal alloys * Must be able to pass aluminum welding certification tests * Performs related tasks such as thermal cutting and grinding * Repairs broken or cracked parts, fills holes, and increases size of metal parts * Locates and repairs cracks in products and equipment * Maintains clean work area * Operates lathes, drill presses, mills, routers, grinning machines, duplicating, and profile machines, brakes and shears * Determines layouts and welds parts and assemblies according to engineering drawings and specifications * May monitor and verify quality in accordance with statistical process or other control procedures * Trains less experienced employees to build quality products within the time standard * Participates in continuous improvement meetings, and shares knowledge for improvement actions * Under minimal supervision, interprets drawings, sketches, and/or preliminary designs, and produces weldments from that interpretation * Interacts with employees and managers across the company * May need to operate a vehicle or forklift * Work done with minimal supervision * Work may be done without established procedures * Performs other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: * Must know shop mathematics through geometry * Ability to read and interpret complex prints * Good eye/hand coordination * Basic computer skills * Must have the ability to follow written and verbal instructions * Must have the ability to follow safety practices * Basic problem-solving skills * Ability to learn how to use necessary computer tools * Visual attention to detail * Reliable hand strength and manual dexterity * Three (3) years directly related work experience or two (2) years of concentrated welding training. * High school Diploma or GED required, AA in welding. * Able to lift to a maximum of 25-40 lbs. * Able to sit/stand for long periods of time. * Must be a U.S. Citizen Salary Range: $22.00 - $26.00 / hour SHAPING THE FUTURE THROUGH INNOVATION AND DISCOVERY! With a history spanning more than seven decades, Communications & Power Industries' thousands of products have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, assist in diagnosing medical conditions, empower scientific discoveries and space exploration, and much more. CPI is headquartered in Plano, Texas and is a global manufacturer of electronic components and subsystems. We have manufacturing locations in the United States, Canada, Europe, and Asia. With a heritage of technological excellence, our team serves customers in the communications, defense, medical, industrial, and scientific markets. WHAT WE OFFER: Whether you are a seasoned professional or just embarking on your career, CPI is an ideal place to expand your knowledge and expertise. We cultivate a healthy, dynamic, and team-oriented environment that empowers our employees to develop, create and deliver innovative, reliable technology solutions to power, connect, protect, and support a better tomorrow. We offer our employees an attractive compensation package with competitive salaries and comprehensive benefits, including health and wellness programs, career development, generous retirement savings plan with company match and more! WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI, and we respect each employee as an integral member of our growing team. CPI is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

The Welder position is responsible for accurately reading and interpreting blueprints, drawings, and specifications to meet project requirements. This role involves fabricating large fuel tanksup to 60 feet long and 13 feet widedesigned to hold 3,000 to 10,000 gallons of diesel fuel. The welder must ensure strict adherence to safety standards by wearing required PPE and following all safety guidelines throughout the process. Hours of operation: 4:30pm 2:30am This position is scheduled Monday through Thursday and is eligible for 10% differential pay. Accountabilities: Read and interpret blueprints, drawings, and specifications to determine welding requirements.Prepare materials by cleaning, cutting, and positioning components for welding.Set up, operate, and maintain welding equipment and tools.Weld components using manual or semi-automatic equipment in multiple positions.Inspect welds to ensure compliance with specifications and quality standards.Complete quality checklists at each stage of the process.Work with various metals, including steel, aluminum, and stainless steel.Prepare surfaces by removing slag, rust, grease, and scale prior to welding.Maintain a safe and clean work environment by following all safety protocols and wearing required PPE.Report hazards, near misses, and unsafe conditions promptly.Collaborate with team members and supervisors to meet production goals.Perform other duties as assigned to support welding and fabrication operations. Attributes Safety First: Adheres to all safety protocols and promotes a hazard-free workplace.Have Humanity: Works respectfully and collaboratively with team members.Be Transparent: Communicates clearly about progress, challenges, and safety concerns.Drive Innovation: Suggests improvements to welding processes and tools for efficiency.Be Resilient: Adapts to changing priorities and production demands with a positive attitude.Always Reliable: Consistently delivers accurate, high-quality work.Grit: Handles physically demanding tasks with persistence and pride in craftsmanship Required Knowledge/Experience: High school diploma or equivalent required; welding certification preferred.2+ years of welding experience, preferably in manufacturing or heavy equipment.Experience with 7024 welding rods and .045 wire MIG preferred.Ability to read and interpret blueprints and engineering drawings.Familiarity with welding machinery, electrical equipment, and manual tools.Strong mechanical aptitude and attention to detail.Knowledge of jobsite safety regulations and PPE requirements.Reliable, responsible, and respectful team player.Must pass a background check and drug screening. Work Environment and Physical Demands Manufacturing environment with exposure to indoor and outdoor conditions.Ability to stand, kneel, stoop, or crouch for 810 hours per day.Frequent use of hands for handling tools and components.Must be able to lift up to 50 lbs and push/pull up to 100 lbs (following OSHA standards).Visual and auditory ability to navigate safely and communicate effectively. Powered by JazzHR PI2c34d28464f9-31181-39359315