Welder jobs in Modesto, CA - 452 jobs

Full-time Description The general purpose of this position is to weld simple to complex components and/or structures while meeting all safety, quality, and schedule requirements. Responsible for various types of weld preparation, welding, and weld finishing operations to accomplish welding in accordance with customer drawings and specifications. Requirements Proficient in assigned aluminum welding techniques, including weld fillets, gusset toe and wraps, frame wraps and termination Demonstrated ability to weld into corners / vertical intersections with minimal blending Ability to evaluate and correct basic weld pick up, with minimal supervision Basic knowledge in assigned welding techniques Basic knowledge of wire and filler material applications for various steel alloys and aluminum Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) Working in compliance with all safety, quality, environmental and health requirements. Job Requirements Must be able to pass eye test and workmanship qualification test. Must be tested and fit for respirator use. Willing to work any shift and overtime as required. Education and/or Experience High school diploma required. Minimum of 2 years of proven experience in a welding trade is required. Shipyard experience is preferred, but not required. Knowledge, Skills, and Abilities Ability to take direction and follow instructions Good mechanical aptitude with ability to produce consistent quality Ability to inspect and correct basic weld pick-up without supervision Ability to work independently and as part of a team Problem-solving and trouble-shooting skills Excellent hand-eye coordination; good spatial orientation Ability to consistently meet production deadlines Ability to use conventional and precision measuring instruments Ability to pass a skills evaluation test to demonstrate welding ability Ability to weld in uncomfortable positions where applicable Ability to work on beams, scaffolding, ladders and confined spaces. Ability and willingness to work with and to teach less-skilled workers Ability to maintain and perform routine preventive maintenance on welding equipment Physical Requirements: Frequent standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Physical ability to lift, push, pull and carry 50+ lbs., bend, stoop and climb scaffold and work on elevated work surfaces, beams, ladders, and confined spaces. While performing the duties of this job the employee is regularly required to use hands and fingers to handle, feel, talk, or hear. The vision requirements include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Works in all areas of the shipyard and on-board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. The noise level in the work environment can vary and is often loud. Salary Description $25 - $38 Hourly - DOE

Reference Number: 4012 Department: Engineering Most communications will be done electronically. Please check email, including spam folders, daily. If you wish to solicit an employee referral for this position, please ensure the employee submits the referral prior to submitting your application. Description Become part of a dedicated group of Welder Helpers who have been instrumental in maintaining Union Pacific's railroad tracks for over 150 years! As a Welder Helper, you will actively contribute to the repair, tempering, and cutting of rails, frogs, switches, and other essential welding tasks. Your efforts in repairing or replacing tracks will play a vital role in ensuring the safe and efficient movement of trains, enabling Union Pacific to serve its customers across North America. We are powered by our people, will you join our team? Required Certifications:For this position, you will be required to become a Union Pacific certified driver during your probationary period. To become certified, you must meet the following Motor Vehicle and Medical Requirements: 1. Must be a minimum of 21 years of age 2. Have valid driver's license 3. Have an acceptable driving record per your Motor Vehicle Record (MVR) 4. Acquire your Commercial Driver's License (CDL) if you will be operating a vehicle(s) with a GVWR of 26,000 lbs or greater. If this is required, you will need to obtain your CDL during your probationary period. Medical Requirements:Must meet the medical requirements (also called physical qualifications) for commercial motor vehicle drivers as specified by the US Federal Motor Carrier Safety Administration (FMCSA). The FMCSA physical qualifications for drivers can be found on the FMCSA homepage. Health and Medical Services at Union Pacific Railroad will make the final determination on whether or not an individual meets the FMCSA medical qualifications, and may add additional medical requirements to assure the person can safely perform job tasks, with or without accommodation. Accountabilities * Perform track maintenance activities such as repairs, installations, and component removals as required. * Utilize load/unload devices to handle and transport track materials and equipment. * Monitor track conditions for any issues or defects, while also observing the right-of-way and passing trains for any shifted loads or spillages. * Operate equipment safely and efficiently to drive spikes, tighten or loosen track bolts, and utilize pullers to remove spikes. * Maintain the trackbed by replacing and compacting ballast, as well as assisting in unloading ballast from ballast cars. * Foster positive relationships with colleagues, supervisors, contractors, and customers, and effectively manage conflicts when they arise. * Ensure compliance with all safety rules, operational guidelines, and regulations set by the Federal Railroad Administration (FRA). * Carry out additional assigned duties as necessary. Qualifications - Required * Possess a current and valid driver's license. * Hold a Commercial Driver's License (CDL) of either Class A or Class B, or have the ability to obtain one during the probationary period. * Capable of comprehending and interpreting regulations and instructions. * Demonstrates strong verbal and written communication skills to effectively convey information to colleagues and supervisors. * To be considered for this position, candidates are required to successfully complete an assessment in English before proceeding to the interview stage. For more information go to the FAQs on UP.jobs. Qualifications - Preferred * Valid Commercial Driver's License (CDL) - Class A or Class B. * Minimum of 1 year experience in Railroad Maintenance of Way work. * Demonstrated experience working outdoors in diverse weather conditions, including professional, personal, or volunteer work. * Proficiency in working within a construction-type environment, gained through professional, personal, or volunteer experience. * Skilled in operating heavy equipment such as construction or farm machinery, with relevant experience in professional, personal, or volunteer capacities. * Proficiency in welding or possession of a welding certificate, gained through professional, personal, or volunteer experience. * Flexibility and willingness to work on-call, overtime, various shifts (including weekends and holidays), and up to 7 days a week. Physical and Mental Job Requirements * To be considered for employment, candidates must successfully pass a Physical Ability Test (PAT). Please note that this test is separate from the medical exam. For additional details, refer to the FAQs on UP.jobs. * Physical Stamina: Capable of performing physically strenuous work continuously. Occasionally, bending, stooping, and kneeling may be necessary. * Manual Dexterity: Must possess manual dexterity with eye-hand coordination, allowing for precise and coordinated movements. * Lifting and Carrying: Occasionally, there is a need to lift and carry objects weighing up to 65 lbs. Additionally, pushing and pulling objects weighing up to 119 lbs may be required. * Balance and Mobility: There may be occasions when climbing ladders is necessary to access truck storage. The ability to walk frequently and maintain balance on various surfaces is essential. * Prolonged Standing: The job requires the ability to remain standing for more than half of each workday. There will be periodic opportunities to change positions for comfort. Work Conditions * Minimum age requirement: Applicants must be at least 21 years old. * Must be legally authorized to work in the United States without requiring company sponsorship. * Comfortable working in close proximity to large equipment, including railcars, locomotives, and cranes. * Preference given to candidates who are willing to reside and work in specific locations indicated in the job listing. * Strong commitment to practicing and maintaining safe work practices. * Flexibility in terms of travel: Candidates should be prepared for extensive travel across Union Pacific's 23-state system, which may be required at short notice. What we offer: * A strengths-based, engagement-focused, and performance-oriented culture * Ongoing learning, development, and Educational Assistance (including little to no out-of-pocket cost for online and in-person courses at the University of Nebraska at Omaha) * 401(k) retirement plan * Employee Stock Purchase Plan with 20% match up to 5% * Medical, dental and vision insurance, which are collectively bargained for through union membership * Wellness and Employee Assistance Programs

Stockton, CA Salary Range: $36.00 - $40.00/Hourly Build an Aviation Career You're Proud Of Build your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. StandardAero has an opportunity for a Welder with experience in metal fabrication equipment such as gas tungsten arc (GTAW), gas metal arc (GMAW), flux-cored arc (FAW), plasma arc (PAW), shielded metal arc (SMAW), and resistance welding. As a Welder I, you will perform precision welding and metal fabrication work in support of aerospace repair and manufacturing operations, using a variety of welding processes and fabrication equipment. This role requires strong blueprint interpretation skills, attention to detail, and a commitment to quality and safety standards. What you'll do: Produce a variety of parts from shop drawings to conform to specifications Read and interpret blueprints or welding process specifications Operate brazing and soldering equipment Operate metal shaping machines such as brakes, shears, and other metal straightening and bending machines Participate in continuous improvement of processes Cross train in other complementary skills to support production requirements Observe all applicable safety requirements Basic Qualifications: High School Diploma or GED and 3+ years of welding experience Completion of a welding apprenticeship program; or equivalent Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day Desired Characteristics: Background in Aerospace/Aviation environment Experience with welding thin gauge material and exotic metals (Inconel and Hastelloy) Ability to read, understand and interpret blueprints and welding process specifications Thorough understanding of tool design and fabrication methods and processes Working knowledge of related company instructions, company processes, reworks process instructions, original equipment manufacturer manuals and MSDS labels Working knowledge of production management computer system and other related internal control systems Attainment of trade certification Attainment of applicable welding ticket(s) Well organized with attention to detail Strong communication and interpersonal skills Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us. Inclusivity Is Our Standard It is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex (including transgender status, sexual orientation, and pregnancy), national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.

Job Description Together We Build - Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. WHO WE ARE Retrofit Technology is part of the Kelso Industries family of companies, a rapidly growing group of mechanical, electrical, and plumbing (MEP+) contractors committed to excellence in safety, quality, customer success, and craftsmanship. Based in Bloomington, California, Retrofit Technology specializes in all aspects of commercial HVAC systems, including installation, maintenance, and service. Our team is equipped to handle projects from start to finish with precision and care. Backed by certified welders, electricians, and service technicians, we have the expertise to tackle even the most challenging HVAC retrofit and mechanical projects-delivering exceptional results every time. ABOUT THE ROLE We are seeking an experienced Pipe Welder to join our growing team and support mechanical and HVAC retrofit projects across Southern California. This position is based out of Bloomington, CA and requires frequent travel to job sites throughout the region. A daily per diem is provided and hotel accommodations are covered by the company when overnight stays are necessary. The Pipe Welder will be responsible for fabricating, assembling, and installing piping systems for commercial and industrial HVAC applications. The ideal candidate has hands-on experience with multiple welding methods and piping materials, values safety and quality, and can work both independently and as part of a field crew. RESPONSIBILITIES Weld and assemble piping systems using various methods (TIG, MIG, stick, brazing, soldering, etc.). Fit, align, and secure pipe systems and supports according to specifications and drawings. Read and interpret blueprints, schematics, and technical drawings. Fabricate and install copper, carbon steel, stainless steel, and PVC piping. Perform rigging, demo, and installation work on HVAC retrofit projects. Inspect completed welds to ensure compliance with codes and safety standards. Collaborate with project managers, foremen, and other trades to complete projects efficiently. Maintain a clean, safe, and organized work area in compliance with OSHA and company policies. QUALIFICATIONS High school diploma or GED equivalent. 3+ years of experience in pipe welding or mechanical retrofit environments. Proficiency in one or more of the following: Soldering or brazing copper pipe Welding carbon or stainless steel pipe Fitting or threading steel and PVC pipe Ability to pass a pipe welding test (administered at our Bloomington shop). Skilled at reading and following mechanical drawings and specifications. Valid driver's license and willingness to travel throughout Southern California. Strong attention to detail, reliability, and safety mindset. COMPENSATION & BENEFITS Hourly wage: $30 - $50 per hour (based on experience and certification) Per diem and hotel accommodations provided for overnight travel Paid travel time to and from job sites Comprehensive benefits package: Medical and dental (50% employer paid) 401(k) with up to 4% company match Eligibility after 30 days of employment Paid Time Off (PTO) and company holidays Opportunities for long-term growth within the Kelso Industries family JOIN OUR TEAM If you're a skilled welder who takes pride in craftsmanship and enjoys working on complex HVAC retrofit projects, we'd love to hear from you. Apply today to join a team that values safety, integrity, and excellence in every project. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from our lowest geographic market up to our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered and forms of compensation that may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. California Pay Range$30-$40 USD Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. About the Role: This position is for experienced welders who are able to use the necessary equipment for MIG and TIG welding of structures, enclosures, pipes, and other components, as well as general fabrication and refurbishment, and operating equipment and heavy machinery. Experienced welders who are able to perform open root welding. What You Will Do: Plan sequences of welding operations and determine methods of welding to weld structural details and assemblies, using all available welding processes such as gas, electric arc, (GTAW), heli-arc, orbital, sigma and submerged arc welding. Perform setup incidental for welding operations, working from blueprints, sketches, other authorized documents and/or oral instructions. Weld any gauge materials where welded areas are subject to high pressure or extreme stress and where care must be taken to prevent leaks and cracks. Weld flat, vertical or overhead areas, or in difficult positions and areas difficult of access. Recognize need for and pre-heat materials as necessary and minimize warpage by proper location of weld and stress relieving methods. Form and shape details, as required. Improvise welding aids such as paper templates, locating devices, holding blocks, etc. Perform surface preparation of parts such as cleaning, sanding, grinding, polishing and some assembly of parts. Clean and dress welds including the cutting and repairing of unacceptable weld joints. Check own work for conformance to specifications. Must pass and maintain required certifications. Use all necessary equipment, tools and materials required to perform work as a journeyman. Must be able to climb and weld from ladders, scaffolds roofs, and in pits. Maintain good shop practices. What You Have: Must be able to pass multiple welder qualification tests Minimum of three (3) years GTAW 2G and 3G experience in a production environment Available to work any shift Ability to perform simple computer operations, work from digital prints Desired Qualifications: Three (3) to five (5) years of GTAW welding experience Experience welding with precision fixturing Ability to work overtime as needed Summary Pay Range: $32.52- $48.78 Compensation and benefits may vary depending on multiple individualized factors, job level, market, location, job-related knowledge, skills, individual performance, and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. Medical, dental, and vision benefits* Paid time off plan (Vacation, Holidays, Volunteer, etc.)* 401(k) savings plans* Health Savings Account (HSA)* Flexible Spending Accounts (FSAs)* Health Lifestyle Programs* Employee Assistance Program* Voluntary Benefits and Employee Discounts* Career Development* Incentive bonus* Disability benefits Life Insurance Parental leave Adoption benefits Tuition Reimbursement Sign on bonus * These benefits also apply to part-time employees This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Passionate people create exceptional things Did you know that the solutions we develop are a key part of most industries? Electronics, medical research, renewable energy, food production, infrastructure and many more. We´re everywhere! Working with us means working with the latest technologies and groundbreaking, sustainable innovations. With our inclusive and caring environment, you get the support and inspiration you need to grow. Here, your ideas are embraced, and you never stop learning. Interested in being part of our team? Join us on our journey for a better tomorrow. We at Edwards believe that there is always a better way. This spirit drives us to provide leading edge technology, innovative and sustainable products, as well as best in class service to our customers around the globe. That's where you come in - we believe our people make it happen. We provide a collaborative, inclusive and flexible work environment along with competitive compensation and comprehensive wellness & benefits programs. Weld Prep (Saugerties, NY) The Weld Prepper is responsible for welding, cutting, and assembly of metals parts according to work order, blue-print and verbal direction. Essential Duties and Responsibilities: Familiarization with orbital welding system to develop competency in order to weld metal parts according to work orders, blue print layouts and verbal instructions Familiarization with gas flow characteristics Competency with basic department functions, including but not limited to the fundamentals of orbital welding overall Use of inspection gauges such as micrometers Follow blueprints to meet product specifications and maintain tight tolerances Wear Personal Protective Equipment as required by job detail Participate in training provided by seasoned employees to learn basic department functions Maintains awareness of workload and plans workflow accordingly Maintain tools, gauges, and equipment in a clean, orderly, and safe manner Comply with company policies and procedures, paying special attention to safety requirements. Follow clean room protocol Perform all other duties as assigned Knowledge, Skills, and Abilities: Work well in a team environment Excellent attention to detail Strong analytical and problem-solving skills Ability to focus on and complete assigned tasks in a timely fashion Ability to follow guidelines to ensure a safe and efficient work environment Always maintains professional approach with internal and external customers Strong verbal and written communication skills Practices department and company-wide continuous improvement Willingness to train in multiple disciplines to drive company-wide cross-functionality Ability to sit for prolonged periods and occasionally walk, bend and lift up to 25 lbs. Education, Certifications and Experience: High School Diploma, equivalent, or related experience required Previous industry experience preferred Salary Range: $20 - $24 per hour Compensation may vary outside of this range depending on a number of factors, including a candidate's qualifications, skills, competencies, experience, and location. #UWX What you can expect from us: Excellent working conditions and benefits Part of the Atlas Copco Group with a wide-reaching internal job market Work in a global diverse and dynamic environment You can grow with us: we always look for internal candidates before checking the market and have training and development programs We have a friendly, family-like atmosphere - and that is not just a claim on the wall, it's a true fact You can be creative and promote your own ideas Every day brings new challenges and new things to learn Edwards Company considers for employment and hires qualified candidates without regard to race, religion, color, sex, sexual orientation, genetic information, gender, gender identity, gender expression, age, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law, and as such affirms in policy and practice to support and promote the concept of equal employment opportunity and affirmative action, in accordance with all applicable federal, state, provincial and municipal laws. Edwards is a global leader of vacuum and abatement systems. We are proud to lead the industry, pushing the boundaries of science to deliver innovative products which are intrinsic to everyday life, working in partnership with our customers and continually setting new standards. With over 100 years of rich heritage, Edwards is the partner of choice for tens of thousands of customers in critical applications around the world. Vacuum is required in diverse sectors, from the generation of power to the production of steel, to the challenging environments of space simulation and high energy physics research. At Edwards, we believe there is always a better way. Our employees are full of ideas. When looking to add a new team member, we are looking for someone that can appreciate what the Edwards Team has done and bring their new ideas and perspective to enhance where we can go. At Edwards you get to be part of something big; we work globally, but also get the opportunity make a difference locally in our own discipline. We work hard to attract, motivate, develop and retain the best talent from the diversity of people across the globe. Our vision to be First in Mind, First in Choice relies on this strategy. We are an Equal Opportunity Employer. For more information about Edwards visit our website: ********************* A division of Atlas Copco Diverse by nature and inclusive by choice Bright ideas come from all of us. The more unique perspectives we embrace, the more innovative we are. Together we build a culture where difference is valued and we share a deep sense of purpose and belonging.

Job Description Company Background: We are 24 (and growing) market-leading operating companies that deliver unmatched HVAC, mechanical, refrigeration, plumbing, and electrical solutions. We are actively building the nation's preferred technical service partnership for commercial MEP+ ecosystems, empowering industrial, commercial, and institutional clients-including Fortune 500 companies and other industry leaders across the United States-with reliable, innovative service. Learn more about us at ************************ WHO WE ARE Retrofit Technology is part of the Kelso Industries family of companies, a rapidly growing group of mechanical, electrical, and plumbing (MEP+) contractors committed to excellence in safety, quality, customer success, and craftsmanship. Based in Bloomington, California, Retrofit Technology specializes in all aspects of commercial HVAC systems, including installation, maintenance, and service. Our team is equipped to handle projects from start to finish with precision and care. Backed by certified welders, electricians, and service technicians, we have the expertise to tackle even the most challenging HVAC retrofit and mechanical projects-delivering exceptional results every time. ABOUT THE ROLE We are seeking an experienced Pipe Welder to join our growing team and support mechanical and HVAC retrofit projects across Southern California. This position is based out of Bloomington, CA and requires frequent travel to job sites throughout the region. A daily per diem is provided and hotel accommodations are covered by the company when overnight stays are necessary. The Pipe Welder will be responsible for fabricating, assembling, and installing piping systems for commercial and industrial HVAC applications. The ideal candidate has hands-on experience with multiple welding methods and piping materials, values safety and quality, and can work both independently and as part of a field crew. RESPONSIBILITIES Weld and assemble piping systems using various methods (TIG, MIG, stick, brazing, soldering, etc.). Fit, align, and secure pipe systems and supports according to specifications and drawings. Read and interpret blueprints, schematics, and technical drawings. Fabricate and install copper, carbon steel, stainless steel, and PVC piping. Perform rigging, demo, and installation work on HVAC retrofit projects. Inspect completed welds to ensure compliance with codes and safety standards. Collaborate with project managers, foremen, and other trades to complete projects efficiently. Maintain a clean, safe, and organized work area in compliance with OSHA and company policies. QUALIFICATIONS High school diploma or GED equivalent. 3+ years of experience in pipe welding or mechanical retrofit environments. Proficiency in one or more of the following: Soldering or brazing copper pipe Welding carbon or stainless steel pipe Fitting or threading steel and PVC pipe Ability to pass a pipe welding test (administered at our Bloomington shop). Skilled at reading and following mechanical drawings and specifications. Valid driver's license and willingness to travel throughout Southern California. Strong attention to detail, reliability, and safety mindset. COMPENSATION & BENEFITS Hourly wage: $30 - $50 per hour (based on experience and certification) Per diem and hotel accommodations provided for overnight travel Paid travel time to and from job sites Comprehensive benefits package: Medical and dental (50% employer paid) 401(k) with up to 4% company match Eligibility after 30 days of employment Paid Time Off (PTO) and company holidays Opportunities for long-term growth within the Kelso Industries family JOIN OUR TEAM If you're a skilled welder who takes pride in craftsmanship and enjoys working on complex HVAC retrofit projects, we'd love to hear from you. Apply today to join a team that values safety, integrity, and excellence in every project. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from our lowest geographic market up to our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered and forms of compensation that may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. California Pay Range$30-$40 USD Why Join Us? We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at ************************ We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment on the basis of race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business.

Non-Exempt Oldcastle Infrastructure, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We're more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We're a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we're leading the industry with innovation and a safety-first mindset. Oldcastle Infrastructure - Built For Life from Oldcastle Infrastructure on Vimeo. Job Summary Performs a wide range of duties in an industrial manufacturing environment. Uses shop prints to weld and fabricate in a safe and efficient manner. This is a union plant. Job Responsibilities * Interpret basic drawings, including plan, isometric and sectional views * Maintain an average efficiency rate of 85% or above * Attain knowledge of proper PPE required in each are of Weld * Demonstrate safe and effective use of hand tools related to welding duties * Routinely perform cleaning procedures (as explained by maintenance) and replace consumable parts specific to your machine * Maintain a clean workspace * Other duties assigned as needed Job Requirements * High school diploma / equivalent * Ability to understand and interpret work orders * Ability to lift up to 40 lbs. * Welding experience * Ability to set and adjust welding machine settings to accommodate changing job requirements Compensation * The hourly pay rate is $27.72/hr * 401(k) plan / group retirement savings program * Short-term and long-term disability benefits * Life insurance * Health, dental, and vision insurance * Paid time off * Paid holidays What CRH Offers You * Highly competitive base pay * Comprehensive medical, dental and disability benefits programs * Group retirement savings program * Health and wellness programs * An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. Date: Jan 15, 2026

Job Description The specific pay rate and level will depend on the successful candidate's qualifications, prior experience and location. “Perks” DailyPay Available!! Make any day a payday - You deserve to get paid any day!! 10 days + 2 half days Company Paid Holidays + vacation and sick time! Medical, Dental, and Vision benefit options 401(k) Retirement Plan with Company Match. Company paid Life Insurance We also offer HSA, FSA, EAP and Pet Insurance! Safety and Recognition programs Boot Program Drug-Free, Safety-Focused Work Environment It's a great place to work where you are given the space to share ideas and opinions and the bottom-line is “YOU” matter! “A Day in the Life” Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques. Ability to determine appropriate welding process. Cuts, grinds, shapes, and moves materials to be welded or fabricated. Ensures the highest possible quality is performed on work provided. “What You'll Do” Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding technique Operate and assist with programming or setup of robotic welding arms used in the fabrication process Grinding, cutting, and shaping materials to be fabricated or welded Operates machinery associated with welding and manufacturing of modular buildings Inspects, repairs, installs, modifies, and performs welds, and maintains welding equipment Maintain inventory, tools, supplies and work area in an organized manner Operate both plasma and flame cutting torch Perform other duties as assigned “Must Haves” Knowledge of codes and industry standards applicable to work performed Good at establishing clear directions and lays out work in a well-planned and organized manner. Monitors process, progress and results. Be able to read and understand floor plans and work orders for projects Able to work outside in variable weather conditions Ability to use both manual and power tools Ability to use mathematics to calculate length, width, depth, etc. as it relates to construction and accuracy of specs and requirements Ability to follow written and spoken instruction Ability to safely perform tasks “Nice to Haves” Experience working in environments that use automated or robotic welding technology Maintains current certification through industry standard agency or process High school diploma or equivalent Prior experience in the construction industry performing welding and commercial welding new construction and remodel construction required Able to read Company's construction documents (provided in English) and provide guidance to construction team to complete necessary work; fluency in spoken Spanish preferred Knowledge of LEAN construction a plus Special Considerations: Able to lift up to 50 pounds Able to carry, bend, stoop, turn, kneel, crawl, climb a ladder and other manual labor activities Flexibility & Evolving Responsibilities This job posting is intended to convey the general nature and level of work expected in the role. It is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Responsibilities may evolve over time, and team members may be asked to take on additional tasks or adjust their focus in response to changing business needs-sometimes with or without prior notice. This flexibility is a valued part of our culture and supports our commitment to collaboration, agility, and shared success. McGrath will continue pre-employment drug testing including marijuana, even in states where it is legal, for this position which is classified as safety-sensitive within our construction operations and Drivers. Ensuring a drug-free environment is not only essential for the well-being of our team members but also aligns with regulatory requirements that govern safety-sensitive positions and commercial driving. Pre-employment screenings are conducted after a conditional offer of employment is extended, in accordance with fair hiring laws. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, on the basis of disability and any other legally protected status. Our company uses E-Verify to confirm employment eligibility. #ENV

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: * Read blueprints and other customer specifications/drawings. * Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). * 6GR Requirements * Minimum 8 years of naval/commercial welding experience. * Must have reliable transportation. * Familiar with OSHA regulations relative to the shipbuilding industry. * Pass hair follicle test and background check. * Comfortable with heights and in confined spaces. * Lift 50lbs without assistance. * Must understand the layout of the ship and compartment identification. * Basic reading, writing and math skills required. * Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: * Health * Dental * Vision * Voluntary Life/Voluntary AD&D * Short-Term Disability * Long-Term Disability * Hospital Indemnity * Accident * Critical Illness * 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability Apply Now Apply Now Share via Email Location San Diego, ca Type Full-time Posted Date April 11, 2025 Compensation * Don't Miss Out Sign up to be notified of new jobs that match this search. Instagram This field is for validation purposes and should be left unchanged. Email CAPTCHA Get Notified Δ

The specific pay rate and level will depend on the successful candidate's qualifications, prior experience and location. “Perks” DailyPay Available!! Make any day a payday - You deserve to get paid any day!! 10 days + 2 half days Company Paid Holidays + vacation and sick time! Medical, Dental, and Vision benefit options 401(k) Retirement Plan with Company Match. Company paid Life Insurance We also offer HSA, FSA, EAP and Pet Insurance! Safety and Recognition programs Boot Program Drug-Free, Safety-Focused Work Environment It's a great place to work where you are given the space to share ideas and opinions and the bottom-line is “YOU” matter! “A Day in the Life” Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques. Ability to determine appropriate welding process. Cuts, grinds, shapes, and moves materials to be welded or fabricated. Ensures the highest possible quality is performed on work provided. “What You'll Do” Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding technique Operate and assist with programming or setup of robotic welding arms used in the fabrication process Grinding, cutting, and shaping materials to be fabricated or welded Operates machinery associated with welding and manufacturing of modular buildings Inspects, repairs, installs, modifies, and performs welds, and maintains welding equipment Maintain inventory, tools, supplies and work area in an organized manner Operate both plasma and flame cutting torch Perform other duties as assigned “Must Haves” Knowledge of codes and industry standards applicable to work performed Good at establishing clear directions and lays out work in a well-planned and organized manner. Monitors process, progress and results. Be able to read and understand floor plans and work orders for projects Able to work outside in variable weather conditions Ability to use both manual and power tools Ability to use mathematics to calculate length, width, depth, etc. as it relates to construction and accuracy of specs and requirements Ability to follow written and spoken instruction Ability to safely perform tasks “Nice to Haves” Experience working in environments that use automated or robotic welding technology Maintains current certification through industry standard agency or process High school diploma or equivalent Prior experience in the construction industry performing welding and commercial welding new construction and remodel construction required Able to read Company's construction documents (provided in English) and provide guidance to construction team to complete necessary work; fluency in spoken Spanish preferred Knowledge of LEAN construction a plus Special Considerations: Able to lift up to 50 pounds Able to carry, bend, stoop, turn, kneel, crawl, climb a ladder and other manual labor activities Flexibility & Evolving Responsibilities This job posting is intended to convey the general nature and level of work expected in the role. It is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Responsibilities may evolve over time, and team members may be asked to take on additional tasks or adjust their focus in response to changing business needs-sometimes with or without prior notice. This flexibility is a valued part of our culture and supports our commitment to collaboration, agility, and shared success. McGrath will continue pre-employment drug testing including marijuana, even in states where it is legal, for this position which is classified as safety-sensitive within our construction operations and Drivers. Ensuring a drug-free environment is not only essential for the well-being of our team members but also aligns with regulatory requirements that govern safety-sensitive positions and commercial driving. Pre-employment screenings are conducted after a conditional offer of employment is extended, in accordance with fair hiring laws. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, on the basis of disability and any other legally protected status. Our company uses E-Verify to confirm employment eligibility. #ENV

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

Job Description Leading large-scale commercial plumbing contractor is seeking an experienced pipe welder to join their team. This person will be responsible for various types of weld preparation, welding, and weld finishing operations to manufacture product to drawings, specifications, or other forms of instruction. Ideal candidate must be adaptable and able to work in a fast-paced environment. Qualifications: Must have experience with Stainless Steel and Carbon Pipe. Posses working knowledge of Mig and Stick welding techniques Relevant certs required Minimum of 2 years of experience with industrial pipe welding Familiarity with torch operation and ability to use skillfully Iron Mechanical offers a competitive salary, medical, dental, vision, 401K benefits, paid time off and sick leave, and travel/per diem pay for jobsite travel.

Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Essential Duties and Responsibilities: * Operate safety equipment, and use safe work habits. * Weld components in flat, vertical, or overhead positions. * Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. * Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding. * Detect faulty operation of equipment and/or defective materials, and notify supervisors. * Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. * Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. * Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications. * Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. * Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. * Performs other related duties as required. Educational and Other Requirements: * High School diploma or equivalent preferred, but not required. * Minimum one (1) year work related skill, knowledge, and hands on experience or vocational training preferred, but not required. * Must stay in position for at least two (2) years depending on prior experience before promoting to Welder II. * Knowledge of principles and processes for providing customer and personal services. * Sensitive to confidential information. * Must work independently and as a member of team. Mental and Physical Requirements: * Able to read, speak and write English. * Strong physical and mental health to maintain demanding workload. * Able to work under stressful conditions at times. * Climbing - able to go up and down stairs. * Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. * Able to wear common protective or safety equipment such as safety shoes, glasses, gloves, hearing protection, hard hats when needed, including welding safety equipment. * Position will consistently dictate 40 - 60 hours per week with frequent overtime demands based on the workload requirements. * Position will require some (6) six day weeks when workload demands, with time off scheduled per current workload and other staff availability. * Strong work ethics of integrity and honesty strives for excellence in all activities employing accompanying communication. * Observing, receiving, and otherwise obtaining information from all relevant sources. * Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. * Analyzing information and evaluating results to choose the best solution and solve problems. * Resolving conflicts and other minor problems. * Dependable, reliable, fulfills responsibilities. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

POSSIBLE TRAVEL TO WISCONSIN WITH PER DIEM SUMMARY/OBJECTIVE The Pipe Welder JM2 assist pipefitter with fit-up of piping systems, accomplish welding piping onboard ship and shop fabrication for P- 2 piping. Welding need to pass all NDT's including hydrostatic testing. For production of Navy ship repair and other marine and commercial equipment. Pipe Welder JM2 must possess trade specific tools. ESSENTIAL FUNCTIONS / DUTIES Setup welding equipment Certified for all P-2 piping All welding must pass ndt's Fit and Tack parts together in preparation for welding Perform precise fitting work on components Running lines and leads Blueprint reading and interpret weld symbols Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. Ensure that employees assigned with Firewatch duties are in place and ready prior to begin hot work Fill out Job JSA forms Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. PHYSICAL DEMANDS The Pipe Welder JM2 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Along with such movements, employee is required to lift parts/machinery of up to 75 pounds. Additional demands are listed below: Able to climb ladders and work off scaffolding Able to lift, carry, and or push up to 50 - 75 lbs. throughout the shift (including overtime) * Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions KNOWLEDGE / SKILLS Must be certified in Pipe Welding Ability to weld in all positions Ability to troubleshoot minor welding equipment problems Must be able to evaluate the use of various resources and make knowledgeable decisions regarding safety and company procedures and policies Able to read a tape measure Pass Welder Workmanship Training (WWT) Able to operate sawzall, 4” & 7” grinders, and various other tools Able to use Weld Gauges COMPETENCIES Communication Proficiency Flexibility (Job duties & schedule) Work well with others in all areas where SCW&M is performing work Follow verbal/written instructions Teamwork orientation SUPERVISORY RESPONSIBILTY Pipe Welder JM2 position has no supervisory responsibilities. POSITION TYPE / HOURS OF WORK This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6:00 a.m. to 2:30 p.m. / 2:30 p.m. to 11:00 p.m. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs. REQUIRED EDUCATION AND EXPERIENCE Must be certified Pipe Welder Must have a minimum of 1-2 years of ship repair experience and/or skill set. Must be able to speak and understand Basic English Work Authorization Clearance For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card. Other Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice. Safety and responsible work practices are of SCW&M importance in everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success!

CTR Group is seeking several Pipe Welder's local to the San Diego, CA area. Immediate openings and urgently hiring! What We Offer: Weekly Pay - you receive a paycheck every week Comprehensive Benefits Package Safety First! RESPONSIBILITIES: (may include but are not limited to) Read and interpret basic drawings and weld symbols Pass weld test for all Company weld procedures in the 6GR position Pass Company TIG weld test procedure for Carbon Steel, SS and CUNI pipe Work to Company housekeeping procedure Inspection of work, identification of potential problems, initiation of corrective actions Increase awareness of Quality procedures within department Perform as a productive working team member that meets daily goals set by the supervisor Continuously improve communications and flexibility within the team Help build the team environment Build pride of workmanship and quality through on job training Contribute towards innovation / productivity improvements Assist in the control of waste elimination, e.g. materials, consumables etc Assist supervisor to maintain control of department equipment and its maintenance Must have full set of personal tools Work towards the team goal of delivering the vessel on time Always be ready to start shift on time Follow Company guidelines and procedures Do not leave job early or return late from break times Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage REQUIREMENTS: (may include but are not limited to) Must be able to TIG Carbon, Stainless steel, and Copper Nickle Pipe Ability to pass “A Class” skills validation test to demonstrate welding ability for restricted open root welds Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel, carbon steel and stainless steel to meet contract requirements for A Class welding on the vessel Must have the ability to bend, squat, stoop, crawl, and kneel Perform prolonged standing Ability to turn head from side to side and about the vertical axis Lift/push/pull 50lbs on an occasional basis Lift/push/pull up to 20lbs on a frequent basis Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps) Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts Able to work at a variety of levels (ex. waist, eye, overhead) Demonstrate the ability to safely and appropriately use required tools and equipment Demonstrate good balance while working on uneven surfaces and maneuvering obstacles Possess sufficient handgrip and coordination to carry and operate tools and equipment Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards Ability to withstand cold and hot temperatures Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time within OSHA guidelines Able to respond to verbal and audible sounds/commands Able to utilize adequate visual skills Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Must be able to tour all vessels and work sites While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear The employee is occasionally required to sit Candidates must meet the following employment eligibility guidelines to be considered for employment: 18 years of age or older at time of application Able to provide proof of US Person Status Willing to submit to a drug screen Willing to submit to a background check Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

TempToFT Job Title: Welder / Pipe Welder Pay: $20 - $30 per hour Schedule: Monday - Friday, 7:00 AM - 4:00 PM (some Saturdays for overtime) About the Company: Key Staffing is hiring a Welder to join a growing company that supplies new, used, and surplus pipe. Their goal is to retain and develop employees who are motivated, team-oriented, and eager to grow with the company. They value individuals who take initiative, work independently when needed, and contribute to a positive team environment. Job Description: We are seeking a talented Welder / Pipe Welder with experience in GMAW (MIG) and flux core welding, primarily on stainless steel. The ideal candidate will be certified in D1.1, with structural welding experience preferred. Responsibilities: Perform welding on stainless steel using flux core and GMAW techniques. Cut, grind, and prepare materials independently. Work outdoors approximately 85% of the time. Follow all safety procedures and company policies. Collaborate with team members to complete projects efficiently. Take initiative to troubleshoot and complete work independently when needed. Requirements: GMAW welding experience required. FCAW welding experience required. D1.1 welding certification preferred; structural welding experience preferred. Ability to cut and grind materials independently. Strong team-oriented mindset; able to get along with others and contribute to a positive work environment. Self-starter with a strong work ethic and desire to grow with the company. Long-term commitment to the company is highly valued. What We Offer: Monday - Friday schedule with some overtime on Saturdays. Opportunity to grow with a stable and supportive company. Team-focused work environment. Commitment to Diversity: As an equal opportunity employer committed to meeting the needs of a multi-generational and multicultural workforce, Key Staffing recognizes that a diverse staff, reflective of our community, is an integral and welcome part of a successful and ethical business. We hire local talent at all levels regardless of race, color, religion, age, national origin, gender, gender identity, sexual orientation, or disability and actively foster inclusion in all forms both within our company and across interactions with clients, candidates, and partners. If this position caught your eye, send us your resume! For best consideration, include the job title and source where you found this position in the subject line of your email to cbalz@hirekeystaff.com 30.00