Welder jobs in Mount Vernon, NY

We are currently seeking an experienced welder to TIG weld aluminum, stainless, and inconel heat transfer components and sub-assemblies for Aerospace applications. 1st Shift Hours: 7:00am - 3:30pm Company Paid Benefits including Medical, Dental, Vision and Paid Time Off Duties and Responsibilities: * Weld any and all assemblies in accordance with weld specifications, weld schedules, method sheets and blueprints as required. * Inspect all welds for any obvious flaws (IE- Missing welds, Porosity, Incomplete Fusion, Undercut, Starts/Stops/Cracks, Excess reinforcement, Arc strike). * Training any new or existing welders on proper weld process techniques or improved welding techniques. * Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. * Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment. * Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage. * Prepares, assembles, and tacks weld parts and surfaces to be welded. * Maintains, organizes, and cleans equipment and the work area. * Notifies supervisor when faulty equipment or defective materials are discovered. * Performs other related duties as assigned. Required Skills and Abilities: * Responsible for welding assemblies in accordance with weld specifications, weld schedules, method sheets and blueprints as required. Education and Experience: * High School education; Trade school preferred * Minimum 3 years' experience welding aluminum and stainless * Must demonstrate ability to weld in accordance with aerospace welding spec. AWS D17.1 and pass welder certification. * Must be able to read and interpret engineering drawings. * Must be able to pass annual eye examination. * Must be conversant in and read, write, and understand English. * Due to ITAR Restrictions, an export license may be required. * Equipment Used: Gas Tungsten Arc Welder (Lincoln, Miller) Physical Requirements: * Must be able to weld components that are vertical, flat, or overhead. * Must have enough manual dexterity and stability as required for precision work. * Must be able to see details at close range. * Must be able to lift up to 75 pounds at times. * Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. The Hughes-Treitler Business Unit designs and manufactures state of the art plate-fin heat exchangers, cold plates, condensers, evaporators, and other heat transfer products. We provide custom design and engineering services, to high quality manufacturing standards, for the aircraft, engine and industrial heat exchangers in the mobile/marine/avionics/space and missile markets. Compensation Employee Type: Hourly Salary Minimum: $50,000 Salary Maximum: $75,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call ****************. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Title: A-Welder Reports to: Foreman Employment Status: Full Time Hourly (Non-Exempt) Pay Rate: Up to 52.45 (depending on qualifications and assessment) About us: Manhattan Mechanical Services provides highly skilled, merit shop craftsmen, ensuring the highest quality and safest mechanical services to light and heavy industrial facilities. Our merit shop philosophy ensures efficiency at every step of the project - from engineering/planning through startup. We are committed to a progressive career path for employees, complete with certifiable skills training. Manhattan Mechanical Services is a unique services provider that supports our customers in multiple areas: industrial maintenance services, process piping, structural steel, equipment installation, scaffolding and insulation. We specialize in providing turnkey projects to our customers. ***TO BECOME AN A OR B WELDER, CANDIDATES MUST PASS AN ASSESSMENT IN BOTH STICK AND TIG WELD*** Primary Function: The A-Welder will be certified in a combination of SMAW & GTAW welding and perform these processes in both shop and field environments. The A-Welder will be expected to work closely with their team and Manhattan Mechanical Services QA/QC Department to ensure all work is completed with the highest degree of quality. Manhattan Mechanical Services is a merit shop contractor supporting a team working environment. As such, all employees will be required from time to time to perform other duties that they are qualified to perform, outside of this job description and their normal work function. Work Environment: The normal work environment for this position will be in an industrial facility, which has been determined to be a safety sensitive environment. You will experience exposure to outdoor weather conditions and wear proper PPE is required for a variety of potential hazards. Every employee's performance could result in a significant incident affecting the health or safety of other employees, customers, customer's employees, the public, property or the environment. Roles & Responsibilities: The roles and responsibilities of an A-Welder may include, but are not limited to, the following: The A Welder is responsible for producing x-ray quality welds according to site standards and specifications. Safe use of hand and power tools. Responsible for identifying potential hazards and mitigating the hazards. Familiar with pipe cutting and beveling operations Read and understand WPS/WPQ documents. Must be willing to work as a team at all times to support the project. Fully participate in health, safety, quality and environmental processes. Experience: Three - Five years of experience in pipe welding, and able to pass SMAW & GTAW welding processes. Skills Required: Must have the following three certifications: Capable of performing X-ray quality welds on carbon steel with SMAW 6010 and 7018 electrodes in all positions including structural steel and pipe. Capable of performing X-ray quality welds on carbon steel and stainless steel with GTAW E70S2 or E70S6 electrodes in all positions including structural steel and pipe. Must be NCCER certified in related trade (knowledge verified and performance verified). Fabricating threaded pipe, socket weld pipe and butt weld pipe. Able to read and understand piping isometric drawings, weld maps, blueprints, and P&ID's. Able to install piping and piping components. Able to build and install various types of pipe hangers and supports. Able to cut and or bevel piping using oxyfuel, plasma, mechanical equipment. Knowledge of Rigging and Rigging operations Able to perform Hydrostatic Testing Education and requirements: Must be willing to attend continued training applicable to job as deemed necessary by Manhattan Mechanical Services. Must be able to pass an NCCER Assessment and be Performance Verified. Must be able to pass and receive TWIC card verification Physical: Must comply with Manhattan Mechanical Services 's drug and alcohol policy. Able to pass physical examination, pre-employment if necessary, as required by Manhattan Mechanical Services. Must be able to climb ladders and stairways. Must be able to carry 50 lbs. of tools and/or materials. Must be able to work at elevated heights as well as in confined spaces. (towers, vessels, excavations, etc.) Must be able to work extended hours on your feet on uneven surfaces. (dirt, concrete, asphalt, mud, gravel, etc.) Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required. Safety/Environmental: Must be able to pass applicable site-specific training. Must be able to read and understand safety instructions, signs, labels and permits in English. Manhattan Mechanical Services is an Equal Opportunity Employer, and relies on the diverse skills, backgrounds and perspectives of our people to drive change, innovation and growth. EOE/M/F/D/V

**Job Title: Welder** **Responsibilities:** + Mig and Stick welding + Take and read measurements for precise execution. + Follow specifications and instructions to ensure maximum efficiency. + Determine the appropriate welding equipment or machinery for each task. + Set up components for welding and ensure alignment using calipers and rulers. + Report any damages to machines and equipment promptly. + Test and inspect welded surfaces and structures to identify any flaws. + Maintain equipment in a safe and operational condition. **Essential Skills:** + Proficient in Mig and Stick welding + At least 1 year experience or welding program certification + Ability to use a variety of welding equipment and procedures (TIG, MIG, etc.). + Strong knowledge and adherence to safety standards. + Attention to detail and critical thinking skills. + Ability to work effectively as part of a team. **Job Type & Location** This is a Permanent position based out of Rutherford, NJ. **Pay and Benefits** The pay range for this position is $22.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Rutherford,NJ. **Application Deadline** This position is anticipated to close on Dec 12, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary: The Entry-Level B Welder is responsible for performing basic welding and repair tasks on steel waste containers and compactors. This position focuses on structural reinforcement, minor fabrication, and the restoration of worn or damaged units under supervision. The B Welder must be reliable, safety-conscious, and eager to learn and grow in a fast-paced industrial environment. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Perform MIG welding, stick welding and torch cutting on steel containers and compactors following basic repair instructions. Assist in structural repairs such as lid attachment, bottom plate patching, caster bracket welding, and frame reinforcement. Grind and clean welds to ensure proper finish and functionality. Operate hand tools and basic fabrication equipment under supervision. Support the team in container inspections and identification of weld-related defects. Adhere to all company safety policies and welding procedures. Maintain a clean and organized work area and assist in equipment maintenance. Report any material shortages, damaged equipment, or safety hazards to supervisor promptly. Document completed repairs and work performed when required. Assist senior welders or fabricators on more complex builds as needed. Requirements and Qualifications: Basic MIG welding, stick welding and torch cutting experience or completion of a welding training program. Ability to follow verbal instructions, work orders, or simple repair sketches. Understanding of basic hand and power tools used in metal repair. Physically capable of lifting heavy parts, standing, bending, and working in indoor and outdoor conditions. Strong work ethic, willingness to learn, and ability to work well with others. Commitment to safety and quality workmanship at all times. Bilingual (English/Spanish) a plus but not required. Working outdoors and in a shop environment. Exposure to welding fumes, sparks, grinding dust, noise, and heavy materials is expected. PPE including welding hood, gloves, boots, and eye protection will be provided and required at all times. Additional Information This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum USD $22.00/Hr. Salary Range Maximum USD $27.00/Hr.

Lincoln Tech is seeking a Welding Instructor to join our team. We invite experienced welders to apply for this full-time position within our Welding program. While prior teaching experience is not required, we offer comprehensive training to ensure your success in this role. Your expertise and passion for welding will be instrumental in educating and mentoring the next generation of skilled professionals. This is a unique opportunity to contribute to the advancement of welding education and make a lasting impact on the careers of aspiring welders. Key Responsibilities of Welding Educator: * Teach Welding Technologies Classes: Deliver lessons using Lincoln Tech's accredited training program, ensuring comprehensive understanding of welding principles. * Provide Hands-on Training: Offer practical welding experience in our fully equipped facility, focusing on skill development for students. * Emphasize Safety and Compliance: Teach students the critical importance of safety procedures and industry standards in the welding field. * Support Student Growth: Foster an environment that encourages professionalism, accountability, and continuous improvement. * Motivate and Engage Students: Create a positive and interactive classroom atmosphere to enhance student learning and enthusiasm. * Evaluate and Communicate Progress: Regularly assess student performance and provide clear feedback on their progress. * Prepare Students for Successful Careers: Equip students with the skills and knowledge needed to pursue a successful and in-demand career in Welding Technology. Key Requirements of Welding Educator: * High school diploma/GED * 3+ years of field experience in Pipe Welding / Structural Welding: * GMAW - MIG * GTAW - TIG * SMAW -- Stick * FCAW - Flux-cored arc * Plasma Cutting Benefits * Health, Welfare and Retirement Plans * Paid Holidays and Paid Time Off * Good Work/Life Balance * Career Growth Opportunities * Ongoing Training Support and Resources About Us For over 75 years Lincoln Tech has been one of the nation's leading providers of career training in Healthcare, Automotive/Diesel, Skilled Trades, Information Technology, Cosmetology, and Culinary Arts. Lincoln Tech is an Equal Opportunity Employer. * Email: *********************** * Website: *************************** 14-19874 - Instructor/Welding-27044

Thank you for your interest in joining the National Ramp team! National Ramp is a market leader, innovator, and disruptor providing newfound freedom to elderly and disabled human beings with the greatest range of accessibility ramps in the industry. Our family has been in the access business for over 30 years, and the foundation of our growth and any success we've had is our Core Value to care about people. National Ramp dealers have installed hundreds of thousands of ramps across North America, and it is truly rewarding to make a real and meaningful change in so many lives. We believe that making great ramps is only a part of our work. The greatest work we do is giving fellow humans their freedom back. When someone is literally trapped inside their home or stuck in a hospital, and we can provide a means for them to regain their Freedom Now - that is what brings us true joy and purpose. At National Ramp, we work hard, we are accountable, and we are results-driven. We recognize that these attributes may not be valued by everyone, and that's OK! Our Core Values are: We WOW - We go the Extra Mile. We exceed expectations. We work hard and have fun. We are obsessed with our customers, we love our business, and we love what we do. We are “World Class” in everything we do. We NOW - We GSD (Get Stuff Done) and we get it done fast. Freedom NOW. We are urgent, driven, energetic, and fast-paced. We believe in “production, then perfection”. We Own It - We are accountable. No excuses, no jerks. We take responsibility for our actions, our job, our life, and our world by seeing things through to completion. We are nice, but we are driven for results. We Innovate and disrupt. We are growth-minded, for us and for our customers. We never stop learning. We adapt quickly and thrive on new challenges. We constantly seek ways to disrupt the status quo and improve. We Care. We care about people. About each other, about our customers, about our customers' customers, about our families, and about the world. We are invested in National Ramp and behave like it's our own business to help everyone win. We stay safe to ensure everyone goes home the way they came, every day. Overview: Today, National Ramp is in search of a passionate and enthusiastic Robotic Welder Operator / Programmer that will bring their expertise to our team and help us grow to become the #1 Ramp Company in the World. The Robotic Welder Operator / Programmer, programs, operates, and maintains robotic welding systems to ensure precision and efficiency in automated welding tasks. This role bridges traditional welding skills with modern automation Key Attributes We Admire: Confidence and determination Ability to build rapport across diverse personality types Active listening skills to truly understand and address customer needs Persistence and creativity in problem-solving Your Key Responsibilities: Robotic Welding Programming & Operation Program and operate KUKA/Fronius and OTC robotic welding systems Perform precise and efficient aluminum MIG welding based on product specifications Troubleshoot and optimize robotic programs to minimize downtime and improve cycle times Maintain welding quality standards with consistent attention to detail Welding Fixture Maintenance Maintain, clean, and inspect welding fixtures regularly to ensure alignment, stability, and repeatability Collaborate with engineering and maintenance teams to address wear, damage, or required adjustments Ensure all fixtures are properly stored and accounted for when not in use Production Execution Complete job orders accurately and safely according to defined work instructions Record daily production data on provided worksheets and submit all required forms on time Team Engagement Be actively present in team huddles, stretch sessions, and production meetings Contribute ideas and collaborate respectfully with peers to support continuous improvement Issue Reporting & Communication Notify your supervisor promptly of any issues impacting safety, quality, or productivity - such as defective materials, worn consumables, or missing components Support the manufacturing team in identifying and resolving process bottlenecks or inefficiencies Housekeeping & Tool Management Keep your work area, tools, and equipment clean and organized Return all tools to their designated locations and help maintain 5S standards Additional Duties Carry out other tasks assigned by your lead, supervisor, or manager Skills and Qualifications: 3 years of experience operating and programming robotic welding systems preferred Proven skill in aluminum MIG welding, preferably in a production environment Experience with KUKA/Fronius and OTC robotic systems is a plus Strong mechanical aptitude, attention to detail, and a proactive work ethic Ability to read and follow technical drawings, weld symbols, and job specifications Why Join National Ramp? Our commitment to you goes beyond the usual. You'll enjoy a competitive salary and a comprehensive benefits package after 30 days of employment. This includes health, dental, and vision insurance, a matching 401(k), life and disability insurance, and a wealth of other resources to support your personal and professional life. With 4 weeks of Paid Time Off and additional days for statutory holidays, we ensure you have the time to recharge and enjoy life. More than that, we offer a work environment where you're encouraged to excel and innovate. At National Ramp, your work is more than a job - it's a passion fueled by a community that values your contributions and celebrates your achievements. Join us in our mission to create accessible spaces for everyone. At National Ramp, your work changes lives, including your own. Location: Valley Cottage, NY (On-Site), 5 days a week Salary: The salary range for this position, based in Valley Cottage, NY, is $28.00-$33.00 an hour, plus bonus opportunities. The final salary will be based on the candidate's qualifications and experience. Ready to Make a Difference? Apply Now!

Are you an experienced welder looking for a new and exciting challenge? Do you ever ask yourself "I wish I had the opportunity to be a mentor"? If so, we have an exciting opportunity for you to become an Instructor at Universal Technical Institute! Never taught? No problem! If you have the drive, patience, skills, and passion we'll train you! You've come this far to become an amazing welder…why don't you take the next step to make that happen for the next generation of welders? Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Welding Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in the industry will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern welding technology. What We Offer: $XXXX Sign on Bonus $XX - $XX per hour/year Weekends OFF Paid Training Tuition Waiver: Enjoy a tuition waiver after 6 months of employment for you AND your immediate family offered at UTI and Concorde campuses Paid Time Off: Competitive paid time off programs for employees (Vacation, Sick, Flexible, Holiday) Retirement Matching: 50% match on the first 6% of your contributions after 90 days Paid Parental Leave: 4 weeks of paid leave for both birthing and non-birthing parents to bond with a new baby Competitive Insurance: Health, vision, and dental coverage for you and your dependents Pet Insurance: Competitive coverage for your furry family members through ASPCA Health Plan Enrollment: Eligibility starts first of the month following completing one full month of employment Responsibilities Responsibilities: Inspire and Educate: Create an engaging and inclusive learning environment where students can flourish, fostering their passion for welding while imparting your expert knowledge. Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience. Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements. Mentorship: Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions. Safety First: Instill the importance of safety procedures and best practices to ensure a secure working environment for students. Qualifications Qualifications: Education: High school diploma or GED Experience: 3 years of practical work experience in the field Technical Skills: MIG, TIG, stick and flux-cored welding, oxy-acetylene torch work, plasma cutting, and brazing Communication Skills: Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff Patience and Empathy: A patient and empathetic approach to teaching, understanding that every student learns at their own pace About Us: It's all about reputation. 60 years of experience, trusted by 35+ industry-leading brands, 16 campuses, and 16 technical programs. But it's not all about the numbers. Here at Universal Technical Institute and its family of schools, we care about YOU. We care about making a change in the lives of our employees and our students. We're on a mission to expand our reach and increase our impact, one life at a time and that starts with yours...Come and be a part of our legacy! #INSUTI#LI-KC1

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The TIG Welder at our Baldwin, WI location is responsible for set up and welding of product. This is a 2nd shift onsite role, with hours Monday - Thursday 3:15 p.m. to 1:15 a.m. Role Responsibilities: * Performs set up and all position welding on a diversified line of standard and non-standard product according to print specifications. Materials may include steel, stainless steel, and aluminum. * Fit and position product weldments having several parts, using welding and welding fixtures and jigs where applicable. * Work from prints and routings. * Statistical process control (SPC) data collection and use of graphs (TIG welding). * Complies with all DOT, HAZMAT and environmental policies and procedures. * Uses all designated Personal Protective Equipment as required. While this list is representative of essential job duties, it is not an all-inclusive list of duties required to perform this role. Other duties may be assigned to fulfill Donaldson's mission, vision, and strategic plan objectives. Minimum Qualifications: To perform this job successfully, an individual must be able to demonstrate ability to: * Completion of welding diploma from an accredited weld school, or * Six months industrial weld experience, or * A combination of weld education and experience. * Pass blueprint reading test * Pass practical weld test * Ability to MIG and TIG weld * The position may require that the selected candidate is medically evaluated and able to wear a Power Air Purified Respirator ("PAPR") while fulfilling the requirements of the position. * Perform a variety of tasks throughout the day in a fast-paced work environment. * Interact constructively and effectively with all plant employees. * Ability to work in a team environment toward a common goal. * Reacts to change productively and to handle other tasks as assigned. * Maintains a pattern of regular and predictable attendance. Certifications/Licenses/Registrations: * Weld Hourly Pay Range: $27.41 - $33.50, depending on relevant experience, qualifications, and skills. This position is overtime eligible as per state and federal regulations. This position is eligible for a gainsharing plan based on the achievement of specific goals. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. Key words: TIG Welding, Fabrication, Blueprint Reading, Metalwork, Production Environment Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Job Title: Welder - Allegro Sanitation The welder is responsible for fabricating, repairing, and maintaining metal components of sanitation equipment, such as waste collection trucks, dumpsters, compactors, containers and other related infrastructure. Key Responsibilities: Perform welding, cutting, and fabrication on sanitation equipment, including garbage trucks, dumpsters, and recycling bins. Repair and reinforce metal structures to ensure the durability and safety of sanitation machinery. Read and interpret blueprints, technical drawings, and work orders to execute welding tasks efficiently. Use various welding techniques, including MIG, TIG, stick, and arc welding, depending on the project requirements. Conduct inspections of sanitation equipment and identify areas needing repairs or reinforcement. Operate welding and cutting equipment such as torches, plasma cutters, and grinders safely. Maintain a clean and safe work environment while following all workplace safety regulations and protocols. Collaborate with mechanics and other team members to ensure timely maintenance and repair of sanitation equipment. Perform routine maintenance and troubleshooting of welding equipment. Ensure all welded components meet industry standards and quality expectations. Qualifications & Requirements: High school diploma or equivalent; certification from a welding school or technical program is preferred. Minimum of 2 years of welding experience, preferably in heavy equipment or industrial settings. Proficiency in MIG, TIG, stick welding, and oxy-fuel cutting. Strong mechanical aptitude and troubleshooting skills. Knowledge of workplace safety standards, including OSHA regulations. Physical ability to lift heavy objects, stand for extended periods, and work in outdoor or confined spaces as needed. Work Environment & Schedule: Work is performed in a workshop, outdoor settings, and on-site at sanitation facilities. Exposure to heat, fumes, and noise from welding and fabrication equipment. May require overtime. Benefits: Union position Starting hourly rate $19.96 Health, dental, and vision insurance Pension plan Paid time off and holidays Opportunities for training and career advancement

We are seeking a part-time Welding Instructor who will work alongside the senior instructor, communicate well with other Instructors, and follow the curriculum and provide assistance to students receiving instruction in the Welding Lab. The (PT) welding Instructor will work under the guidance of the Industry and Trades Coordinator. Available hours Mon & Tuesday 8:30 am-2:30pm. Possibly more in fall. This is a part-time, hourly position. EXAMPLE OF DUTIES: * Prep, weld, and visually inspect welds on all materials and processes. * Weld, fabricate and cut, all materials, including mild, stainless, and aluminum. * Guide student learning both in the classroom and welding lab. * Facilitate workshop sessions as needed. * Perform other duties as assigned. Qualifications: * Current welding certification/completion from (AWS), Trade School, 900 hour or equivalent welder/fabricator course or 15 years documented experience. * Candidate must possess knowledge of welding theory, welding code requirements, and certification mandates. * Strong fundamentals and respects, follows and enforces safety protocols. * Ability to work with students of diverse abilities and backgrounds in various learning settings. * Be able to pass a multi process welding and cutting Evaluation. * 5 years of experience in fabrication, fitting, iron work, welding, cnc, pipe, and related metal working industries civilian and military. * Bend test, osha, torch and fire watch certifications, or DOT Certifications ARE required. Do not apply if you don't have a min of 3G in @ least 2 Processes. * Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, Plasma, Oxy-fuel in all positions. Compensation: The hourly pay for this position is $28. Benefits: * New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.) * Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance. * Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses. * NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

Job Description TopView Sightseeing is a New York City-based company offering a variety of sightseeing bus tours. We own and manage the portfolio of brands, including TopView Sightseeing, Event Cruises NYC, Liberty Cruise, Bike Rental Central Park, and Attraction Pass. TopView Sightseeing serves over 500k customers annually, creating unforgettable experiences for New Yorkers and visitors. Join TopView Sightseeing as a Metal Fabricator in Ridgewood, Queens! About the Role: As a Metal Fabricator, you will play a crucial role in the construction of our new fleet of sightseeing buses. You will utilize your expertise in metal fabrication, including welding and assembly techniques, to contribute to exciting and innovative projects. Responsibilities: Fabricate, assemble, and install sheet metal products. Light welding: MIG and stick welding as required. Operate fabricating machines: Cutting, bending, straightening, and shaping metal. Perform various metalworking tasks: Riveting, drilling, gluing, grinding, and joint preparation. Maintain a clean and safe workspace. Contribute to a positive and collaborative team environment. Qualifications: 1+ years of experience in metal fabrication Experience with aluminum and steel fabrication Proficiency in using various power tools Ability to lift up to 50 lbs. Ability to pass a pre-employment drug screen MIG welding experience (preferred) Bilingual (English/Spanish) (preferred) Benefits: Competitive Pay: $20.00 - $22.00 per hour Excellent Benefits: Health, dental, vision insurance Union Membership: Join TWU Local 100 after 90 days Paid Time Off Employee Discount Schedule: 8-hour shifts: 5:30 AM - 2:30 PM (Monday-Friday) or Tuesday-Saturday Weekends as needed Powered by JazzHR TFNj6sevjw

Full-time Description Come join the best heating service company in the NYC area! Controlled Combustion maintains one of the largest and most qualified licensed heating specialist staffs in the industry. Our service personnel, numbering more than 40 people, are members of the Metal Trades Branch-Local 638-A.F.L-C.I.O. That means they are highly qualified, highly competent professionals. In addition, they receive rigorous in-house training as well as ongoing instruction from factory authorized experts and educational institution to keep their technical knowledge current and their maintenance skills sharp. Our shop has earned the prestigious National Board Repair "R" Certificate of Authorization and Symbol Stamp and "U" Certificate of Authorization and Symbol Stamp attesting to our service expertise. Also, our technicians are certified ASME code welders. We maintain a Class "A" installers license in New York City and are licensed throughout the metropolitan area as well. Benefits: 401(k) Dental insurance Health insurance Paid time off Retirement plan Vision insurance Schedule: Monday to Friday Overtime Weekends as needed Experience: Installation / Repair of Gas Piping: 1 year (Preferred) Welding: 1 year (Preferred) License/Certification: Driver's License (Preferred) Work Location: In person Requirements This position will require the following skills and traits: Five (5) years experience under a Licensed Master Plumber DOB Full Gas Work Card Cutting, threading, and fitting black malleable steel piping Cutting, soldering, and braising copper piping ProPress fittings Knowledge of natural gas and fuel oil heating systems Knowledge of utility (ConEd and National Grid) procedures is a plus Electrical experience is a plus. Salary Description $25 to $45

Job Description Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Powered by JazzHR sM65VnVpr0

IHOP Porters will be responsible for cleaning and maintaining dishware/utensils for the continued smooth operation of the restaurant. IHOP Porters will also perform assigned sanitation and housekeeping tasks. Porters must have good communication skills and work well with others. This position requires you to stand for up to 8 hours during a shift, be able to lift at least and/or move up to 50 pounds, and have full mobility of hands and arms while performing repetitive tasks. Porters are also required to perform duties necessary for restaurant operations as assigned by acting supervisor, following governmental and company policies. The above is not an all-inclusive job description. Responsibilities of a Dishwasher:: ● Maintaining a clean and well-organized working environment ● Bussing tables to collect soiled plates and flatware ● Maintaining the availability of clean dishes at all times ● Cleaning kitchen appliances and machines ● Helping other team members to unload and store deliveries ● Assist other staff members with tasks when the need arises ● Adhere to food safety procedures and regulations ● Taking out the trash ● Rinsing garbage cans Dishwasher Job Requirements:: ● Must have minimal work experience as a dishwasher ● Must be proficient in operating with different types of dishes ● Must know and follow all food safety procedures ● Must carry at least a high school diploma or an equivalent ● Must have communication skills ● Must be able to prioritize tasks Benefits: ● Competitive Pay ● Flexible Hours ● Extensive Training ● Real Advancement Opportunities Work schedule Weekend availability Holidays Night shift

Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customers and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary: The A Welder / Fabricator is a senior-level technician responsible for high-quality welding, fabrication, and structural rebuilding of steel containers and compactors. This role requires advanced skills in MIG and stick welding and custom fabrication. The A Welder works independently on complex repair tasks and supports the training and development of entry-level team members. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other duties may be assigned. Perform advanced MIG welding, stick welding and metal fabrication on a variety of container types and compactor components. Rebuild or replace structural frames, bottoms, lids, caster brackets, and mechanical parts using custom-cut steel. Interpret repair orders and/or sketches to execute precise rebuilds or modifications. Use cutting torches, plasma cutters, grinders, and bending tools to shape and prepare materials. Lead fabrication of specialized equipment or container configurations as needed for customer orders. Perform quality control checks to ensure all welds meet company standards. Mentor and train junior welders and assist with onboarding of new hires. Maintain clean and organized welding area and perform basic preventative maintenance on shop tools. Track parts used and time spent on custom or complex builds for cost analysis. Collaborate with supervisors to improve repair standards, safety practices, and efficiency in the yard. Requirements and Qualifications: Minimum 3-5 years MIG welding, stick welding and fabrication experience in industrial or structural repair settings. Proven ability to perform precise welds in various positions and on worn or contaminated metal. Advanced skills using fabrication tools including shears, brakes, torches, and weld jigs. Self-motivated and capable of leading complex projects with minimal supervision. Strong safety awareness and adherence to PPE and shop protocols. Ability to lift heavy materials, work outdoors in all weather conditions, and operate yard equipment as needed. Working outdoors and in a shop environment. Exposure to welding fumes, sparks, grinding dust, noise, and heavy materials is expected. PPE including welding hood, gloves, boots, and eye protection will be provided and required at all times. Additional Information This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum USD $25.60/Hr. Salary Range Maximum USD $25.60/Hr.

1st Shift Hours: 7:00am - 3:30pm Company Paid Benefits including Medical, Dental, Vision and Paid Time Off Fabrication and assembly of sub-components for the completion of heat exchangers to drawing specification. Essential Duties And Responsibilites: * Prepare any cores (IE straighten and soap testing) needed for use in the welding area * Prepare any sub-components (IE cleaning) needed for use in the welding area. * Set up cores/sub-components in welding fixture and preparing unit for welding. * Test any cores (certification required) in the leak tanks. * Review all welds for any obvious flaws (IE- Missing welds, Voids in welds, Excess weld rod, Extremely sloppy welds) * Maintain workstation clean during the shift and ensure it is clean and organized for the next shift, following all 5S instructions * Other duties may be assigned. Required Skills and Abilities: * Must be mechanically inclined * Must be able to read and interpret engineering drawings and blue prints of parts * Must have mathematics skills * Use of calipers, height gauges, micrometers, squares, grinders, sanders, routers, band saws, drill presses, hydraulic presses and other miscellaneous hand tools are required. * Must be able to read, write and converse in English Education and Experience: * High School education or equivalent * Shop floor experience a plus AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications. HT specializes in custom build-to-specification applications where thermal performance, weight, structural and reliability are key considerations. HT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements.AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications. HT specializes in custom build-to-specification applications where thermal performance, weight, structural and reliability are key considerations. HT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements. Compensation Employee Type: Hourly Salary Minimum: $30,000 Salary Maximum: $50,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call ****************. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The TIG Welder at our Baldwin, WI location is responsible for set up and welding of product. This is a 1st shift onsite role, with hours Monday - Thursday 5 a.m. to 3 p.m. Role Responsibilities: * Performs set up and all position welding on a diversified line of standard and non-standard product according to print specifications. Materials may include steel, stainless steel, and aluminum. * Fit and position product weldments having several parts, using welding and welding fixtures and jigs where applicable. * Work from prints and routings. * Statistical process control (SPC) data collection and use of graphs (TIG welding). * Complies with all DOT, HAZMAT and environmental policies and procedures. * Uses all designated Personal Protective Equipment as required. While this list is representative of essential job duties, it is not an all-inclusive list of duties required to perform this role. Other duties may be assigned to fulfill Donaldson's mission, vision, and strategic plan objectives. Minimum Qualifications: To perform this job successfully, an individual must be able to demonstrate ability to: * Completion of welding diploma from an accredited weld school, or * Six months industrial weld experience, or * A combination of weld education and experience. * Pass blueprint reading test * Pass practical weld test * Ability to MIG and TIG weld * The position may require that the selected candidate is medically evaluated and able to wear a Power Air Purified Respirator ("PAPR") while fulfilling the requirements of the position. * Perform a variety of tasks throughout the day in a fast-paced work environment. * Interact constructively and effectively with all plant employees. * Ability to work in a team environment toward a common goal. * Reacts to change productively and to handle other tasks as assigned. * Maintains a pattern of regular and predictable attendance. Certifications/Licenses/Registrations: * Weld Hourly Pay Range: $27.41 - $33.50, depending on relevant experience, qualifications, and skills. This position is overtime eligible as per state and federal regulations. This position is eligible for a gainsharing plan based on the achievement of specific goals. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. Key words: TIG Welding, Fabrication, Blueprint Reading, Metalwork, Production Environment Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Job Description We are seeking a part-time Welding Instructor who will work alongside the senior instructor, communicate well with other Instructors, and follow the curriculum and provide assistance to students receiving instruction in the Welding Lab. The (PT) welding Instructor will work under the guidance of the Industry and Trades Coordinator. Available hours Mon & Tuesday 8:30 am-2:30pm. Possibly more in fall. This is a part-time, hourly position. EXAMPLE OF DUTIES: Prep, weld, and visually inspect welds on all materials and processes. Weld, fabricate and cut, all materials, including mild, stainless, and aluminum. Guide student learning both in the classroom and welding lab. Facilitate workshop sessions as needed. Perform other duties as assigned. Qualifications: Current welding certification/completion from (AWS), Trade School, 900 hour or equivalent welder/fabricator course or 15 years documented experience. Candidate must possess knowledge of welding theory, welding code requirements, and certification mandates. Strong fundamentals and respects, follows and enforces safety protocols. Ability to work with students of diverse abilities and backgrounds in various learning settings. Be able to pass a multi process welding and cutting Evaluation. 5 years of experience in fabrication, fitting, iron work, welding, cnc, pipe, and related metal working industries civilian and military. Bend test, osha, torch and fire watch certifications, or DOT Certifications ARE required. Do not apply if you don't have a min of 3G in @ least 2 Processes. Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, Plasma, Oxy-fuel in all positions. Compensation: The hourly pay for this position is $28. Benefits: New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.) Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance. Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses. NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)