Welder jobs in Northampton, MA - 73 jobs

Job Type: Full-Time Pay: Competitive, based on experience We are seeking a highly skilled Welder with 10+ years of experience to join our team in Springfield, MA. This role requires expertise in welding, fabrication, blueprint reading, and working with a variety of metals in a fast-paced industrial or manufacturing environment. Key Responsibilities Perform high-quality welding using MIG, TIG, and Stick processes Read and interpret blueprints, drawings, and welding symbols Fabricate, assemble, and repair metal components and structures Ensure welds meet quality, safety, and structural standards Inspect finished welds for accuracy, strength, and defects Maintain welding equipment and tools in proper working condition Follow OSHA safety standards and company procedures Collaborate with supervisors and team members to meet production deadlines Required Qualifications 10+ years of professional welding experience Proficiency in MIG, TIG, and Stick welding Strong ability to read blueprints and technical drawings Experience welding carbon steel, stainless steel, and aluminum Excellent attention to detail and workmanship Ability to work independently and as part of a team Reliable, punctual, and safety-focused Preferred Qualifications Welding certifications (AWS or equivalent) Experience in industrial, structural, or manufacturing environments Forklift or overhead crane experience Physical Requirements Ability to stand for extended periods Lift up to 50 lbs Comfortable working in industrial settings

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Operate various welding, soldering and brazing equipment to manufacture heat exchangers, water separators and environmental control system components while practicing and complying with environmental health and safety directions and procedures. **What You Will Do** + Work from various instructions such as specifications, sketches, technical orders, blueprints and other written and verbal instructions within established methods and procedures. + Perform fusion welding, salt braze torch braze, plasma cutting, electric-arc, heli-arc, and acetylene welding processes. + Ensure that all documentation including specifications, blueprints and applicable tools, gages and fixtures are quality compliant and traceable. + Perform preventative maintenance. + Participate in audits of processes, procedures and work areas. + Responsible for own work. + Move parts and materials to designate locations in accordance with normal material flow procedures. + Keep equipment and surroundings neat, clean and organized. + Perform related duties as required within the scope and skill level of this job function. + **2nd Shift 3:30 pm - 12:00 pm Monday - Friday** + **Training may take place on 1st or 2nd Shift for ~3 months** **What You Will Learn** + Operating within Lean Manufacturing method. + Welding in accordance tight specifications and tolerance in the aerospace. + Cross-functional collaboration through various types of manufacturing and processes. **Qualifications You Must Have** + 1-2 years relevant experience. + High school diploma or GED **Qualifications We Prefer** + Production welding Experience + Experience with TIG and Aluminum welding + Experience in the aerospace industry + 5-7 years of relevant experience **What We Offer** Some of our competitive benefits package includes: + Medical, dental, and vision insurance + Generous 401(k) plan that includes employer matching funds + Collins provides eligible employees with paid time off + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Ovia Health, fertility, and family planning + Adoption Assistance + Autism Benefit + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + Doctor on Demand, virtual doctor visits + Bright Horizons, child and elder care services + Teladoc Medical Experts, second opinion program + And more! **Learn More & Apply Now!** We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range for this role $35.40 - $44.47 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. **\#TopOpps** **\#P&CPM** **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not RequiredJoining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Operate various welding, soldering and brazing equipment to manufacture heat exchangers, water separators and environmental control system components while practicing and complying with environmental health and safety directions and procedures. What You Will Do Work from various instructions such as specifications, sketches, technical orders, blueprints and other written and verbal instructions within established methods and procedures. Perform fusion welding, salt braze torch braze, plasma cutting, electric-arc, heli-arc, and acetylene welding processes. Ensure that all documentation including specifications, blueprints and applicable tools, gages and fixtures are quality compliant and traceable. Perform preventative maintenance. Participate in audits of processes, procedures and work areas. Responsible for own work. Move parts and materials to designate locations in accordance with normal material flow procedures. Keep equipment and surroundings neat, clean and organized. Perform related duties as required within the scope and skill level of this job function. 2nd Shift 3:30 pm - 12:00 pm Monday - Friday Training may take place on 1st or 2nd Shift for ~3 months What You Will Learn Operating within Lean Manufacturing method. Welding in accordance tight specifications and tolerance in the aerospace. Cross-functional collaboration through various types of manufacturing and processes. Qualifications You Must Have 1-2 years relevant experience. High school diploma or GED Qualifications We Prefer Production welding Experience Experience with TIG and Aluminum welding Experience in the aerospace industry 5-7 years of relevant experience What We Offer Some of our competitive benefits package includes: Medical, dental, and vision insurance Generous 401(k) plan that includes employer matching funds Collins provides eligible employees with paid time off Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, parental leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program And more! Learn More & Apply Now! We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range for this role $35.40 - $44.47 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. #TopOpps #P&CPM As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Purpose/Scope: To provide general construction labor tasks, in an efficient and safe manner, as part of a welding for precast panels. Essential Duties and Responsibilities: Completes general construction labor tasks necessary to caulk precast concrete panels Takes work direction from welding crew foreperson May perform work of a miscellaneous nature as directed by foreperson Uses materials/supplies in an efficient manner Handles equipment in a responsible manner Follows established safety procedures and policies Basic Qualifications: 3G & 4G Certified Welder AWS Certification Other Required Qualifications: Ability to carry out simple and complex verbal instructions Ability to work well with others and maintain professional conduct at all times Ability to work from ladders and aerial work platforms above 20 ft Ability to obtain membership to local Laborers union General knowledge of construction practices Valid driver's license and reliable means of transportation Ability to travel extensively (50% of the time or more, including overnights) and work overtime as needed Preferred Qualifications: 2+ years of construction or manual labor experience High school diploma or equivalent Physical Requirements: Field: Must be able to traverse uneven ground, move minimum of 50lbs., spatial awareness/depth perception, climb on a flatbed semi-trailer Work Environment: Field: All types of weather conditions (year-round, Mid-west and Northeast), dirt/dust, noise from heavy machinery/vehicles

Job Description We are seeking a skilled and detail-oriented Welder to join our production team. In this role, you will be responsible for fusing metals using various welding processes to manufacture high-quality components. If you take pride in your craftsmanship and are looking for a stable, long-term career with a company that values precision and safety, we want to hear from you. Responsibilities Include: Read and interpret blueprints, technical drawings, and measurements to plan layout. Operate manual or semi-automatic welding equipment to fuse metal segments (MIG, TIG, or Stick as required). Set up components for welding according to specifications (e.g., cutting material, clamping, and tacking). Inspect welded joints and surfaces for defects or hidden cracks to ensure quality standards are met. Maintain equipment in a condition that does not compromise safety or production. Follow all institutional and safety regulations (OSHA) at all times. Skills & Qualifications: Proven experience as a Welder with a strong portfolio of relevant work. Technical knowledge of various welding techniques and metallurgy. Ability to read and understand complex blueprints and mechanical drawings. Proficiency in using electrical or manual tools (saws, squares, calipers, etc.). Strong attention to detail and a commitment to workplace safety. Professional certification (e.g., AWS) is highly preferred. Compensation & Benefits Compensation: Pay will be offered based on several factors including the candidate's education, work experience, work location, specific job duties, and certifications. Benefits: We offer comprehensive benefits to include health, and an incentive recognition bonus (all benefits are based on eligibility). If you are an experienced and reliable professional looking for a direct hire opportunity, we encourage you to apply. Please submit your resume to APPLY TODAY! We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All qualified applicants are encouraged to apply.

Job Description We are seeking a highly skilled Welder with 10+ years of experience to join our team in Springfield, MA. This role requires expertise in welding, fabrication, blueprint reading, and working with a variety of metals in a fast-paced industrial or manufacturing environment. Key Responsibilities Perform high-quality welding using MIG, TIG, and Stick processes Read and interpret blueprints, drawings, and welding symbols Fabricate, assemble, and repair metal components and structures Ensure welds meet quality, safety, and structural standards Inspect finished welds for accuracy, strength, and defects Maintain welding equipment and tools in proper working condition Follow OSHA safety standards and company procedures Collaborate with supervisors and team members to meet production deadlines Required Qualifications 10+ years of professional welding experience Proficiency in MIG, TIG, and Stick welding Strong ability to read blueprints and technical drawings Experience welding carbon steel, stainless steel, and aluminum Excellent attention to detail and workmanship Ability to work independently and as part of a team Reliable, punctual, and safety-focused Preferred Qualifications Welding certifications (AWS or equivalent) Experience in industrial, structural, or manufacturing environments Forklift or overhead crane experience Physical Requirements Ability to stand for extended periods Lift up to 50 lbs Comfortable working in industrial settings

The Welder performs preventive maintenance, fabrication welding, refurbishes refuse containers and compactors, rehabilitates scuffed paint, installs decals and ensures accurate repair and replacement of components. Hourly pay rate is $25.00-$28.00 per hour, depending on experience Key Responsibilities * Performs repairs on all sizes and types of containers and compactors, including road repair. * Performs inspections on all welding and cutting equipment to ensure safe operating procedures * Maintains inventory record keeping and ensures adequate material to complete all assigned work efficiently. * Maintains a clean, safe work area to ensure compliance with company and OSHA requirements and performs all work in accordance with established safety procedures. * Performs preventive maintenance inspections, diagnostic and repair of electrical and hydraulic systems on compactors. * Assists senior welders in the completion of project work. * Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Education, Experience & Qualifications The successful candidate will have a high school diploma or GED, equipment maintenance and repair experience, a demonstrated ability to work as part of a team in a collaborative environment, be 18 years of age or older and be legally eligible to work in the US. Excellent listening, communication, and problem-solving skills, proven commitment to work and a dedication to safety are required. Welding and fabrication skills are expected and the candidate must be a self-directed person. Attributes Positive, team-oriented individual who has a strong work ethic, is committed to safety, customer driven, open to personal and professional training and development, and results-oriented with the ability to see the larger picture while focusing on detailed information. Benefits Medical, Dental, Vision, Life & Disability Insurance, Maternity & Parental Leave, Flexible Spending Accounts, Discounted Stock Program, 401K, Boot & Clothing Allowance, Safety Awards, Employee Assistance Plan, Wellness Incentive, Tuition Assistance, Career Pathways, Tool Allowance, and More.

EB Welder - Non-Exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight-critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. The Electron Beam (EB) welder operator will prepare, arrange, fit, assemble and EB weld a variety of materials (stainless, carbon, nickel alloy, cobalt alloy etc.), and components using a CNC controlled Electron Beam Welding machines. Will perform a variety of repetitive, routine and less critical welding operations and appropriate setups within the limits of clearly established practices and procedures, under the direction of the EB Supervisor or lead person. Location: Based out of East Windsor, CT Reports to: EB Supervisor Salary Grade: Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. Apply EB welding processes to various parts, assemblies, and components Set-up, program, and operate EB and CNC controls for the EB welding process Interpret and execute production using drawings and blueprints Planning and general set up of EB welding operations in the facility, semi-manual and/or automatic, within the limits of certifications in accordance with customer requirements and current methods and process sheets Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications Utilize working knowledge of welding practice and weld-ability of current metal groups within their certification Under supervision, measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers. Maintain records and document in-process inspection data as required. Work with a variety of materials, including steel, copper, aluminum, titanium, Inconel, and other precious metals. Observe and listen to operating machines or equipment to help diagnose machine malfunctions and to determine the need for adjustments or repairs. Perform basic machine maintenance as required to maintain part quality and quantity standards. Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter. Report faulty or unusual conditions to the appropriate level of supervision. Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this . Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data. Must be able to read, write, understand, and speak English at a functional level. Participate in training as required Perform other duties as required or directed, whether or not explicitly mentioned in the job description Various other duties as assigned by Supervisor. Participate in training as required 5-10% Domestic Travel required Physical Demands : Must be able to lift, push, or pull at least 50 lbs. Regularly required to sit, stand, reach, bend, and move about our facility Requirements: Must have sheet metal fabrications skills, familiar with assembly/disassembly procedures Must be able to Set-up, program and operate EB and CNC controls for the welding process Minimum of 5 years' experience using CNC controlled EB welding equipment Experience with aerospace alloys such as Stainless Steel, Inconel, Titanium, Coba lt, and Alum Experience with in-process use of FPI a plus hours: 3p-11p AAP Statement Hanwha Aerospace USA Corporation, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Subject to change with or without notice.

Experience in underground piping and pipe welding. CT G-8 License Required.

EB Welder - Non-Exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight-critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. The Electron Beam (EB) welder operator will prepare, arrange, fit, assemble and EB weld a variety of materials (stainless, carbon, nickel alloy, cobalt alloy etc.), and components using a CNC controlled Electron Beam Welding machines. Will perform a variety of repetitive, routine and less critical welding operations and appropriate setups within the limits of clearly established practices and procedures, under the direction of the EB Supervisor or lead person. Location: Based out of East Windsor, CT Reports to: EB Supervisor Salary Grade: Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. Apply EB welding processes to various parts, assemblies, and components Set-up, program, and operate EB and CNC controls for the EB welding process Interpret and execute production using drawings and blueprints Planning and general set up of EB welding operations in the facility, semi-manual and/or automatic, within the limits of certifications in accordance with customer requirements and current methods and process sheets Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications Utilize working knowledge of welding practice and weld-ability of current metal groups within their certification Under supervision, measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers. Maintain records and document in-process inspection data as required. Work with a variety of materials, including steel, copper, aluminum, titanium, Inconel, and other precious metals. Observe and listen to operating machines or equipment to help diagnose machine malfunctions and to determine the need for adjustments or repairs. Perform basic machine maintenance as required to maintain part quality and quantity standards. Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter. Report faulty or unusual conditions to the appropriate level of supervision. Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this . Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data. Must be able to read, write, understand, and speak English at a functional level. Participate in training as required Perform other duties as required or directed, whether or not explicitly mentioned in the job description Various other duties as assigned by Supervisor. Participate in training as required 5-10% Domestic Travel required Physical Demands: Must be able to lift, push, or pull at least 50 lbs. Regularly required to sit, stand, reach, bend, and move about our facility Requirements: Must have sheet metal fabrications skills, familiar with assembly/disassembly procedures Must be able to Set-up, program and operate EB and CNC controls for the welding process Minimum of 5 years' experience using CNC controlled EB welding equipment Experience with aerospace alloys such as Stainless Steel, Inconel, Titanium, Coba lt, and Alum Experience with in-process use of FPI a plus hours: 3p-11p AAP Statement Hanwha Aerospace USA Corporation, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Subject to change with or without notice . 3p-11pm mon-fri

The position is responsible for performing all functions of welding ensuring personal and product safety, quality, and productivity. Set up, adjust, and operate welding equipment to weld castings, Sheetmetal details, etc. Following Job Operation Sheets to complete repairs as necessary Complete moderate to advanced fitting and welding tasks while applying standard practices. Capable of obtaining and holding required weld qualifications/certifications Perform plug welds in castings, cosmetic weld build up and standard join configurations Check required dimensions using calipers, micrometers, height gages and other inspection tools or fixtures. Identify any Red flag problem areas. Interpret and follow written instructions, sketches, weld schedules, drawings and documents. Involvement in development work, fixturing and process. Work independently with limited oversight. Meet or exceed operations standards for efficiency. Knows when to stop and find appropriate interpretation when necessary. Maintain thorough understanding of how to produce quality parts. Must be able to use mathematics relevant to functions. Qualifications and Education Requirements 5 Plus years TIG/GTAW experience. High school diploma or equivalent. Welding trade school or equivalent experience. Must pass internal welder qualification for welding magnesium within introductory period. Must qualify for stainless and aluminum certifications within the first year. Ability to read and interpret blueprints/drawings. Experience in welding aerospace components comprised of inconel, aluminum, mild steel and stainless steel. Keen attention to detail, accuracy, and safety. Familiar with a variety of metals and finishes. Use mathematical and reading skills. Experience with measuring devices such as meters, gauges, calipers, and other measuring instruments. Working knowledge of safety protocols. Experience working with close tolerances. Experience working in an aerospace manufacturing environment (NADCAP and FAA requirements). Ability to follow standard precautions using personal protective equipment as required. Meets D17.1 visual acceptance criteria (corrective or non-corrective). Strong communication skills as well as a team player. Preferred Skills Aerospace welding background. Manufacturing background. Physical Requirements Ability to lift up to 50 pounds. Ability to stand and sit for long periods of time. Ability to perform repetitive motion (rotating wrists, using small/large tools). Ability to tolerate constant noise (machine motors, grinding, high frequency etc.). Pre-employment requirements All applicants must satisfy a pre-employment DOT/FAA Alcohol & Drug Screen and a background check. This position must comply with our FAA regulated Random Alcohol & Drug Program for Safety Sensitive position. First Shift 7am - 3:30pm (approved OT prior to 7am & Sat mornings) Second Shift-3:30pm - midnight (approved OT after midnight) 10% differential

Wastequip Steel Division has an immediate opportunity for a Welder to support our New Lebanon, NY manufacturing operation. The ideal candidate will be a MIG Welder with prior experience in a manufacturing environment. Pay Range: $21.44 - $24.92 (Based on experience). Responsibilities Positions parts in jigs or fixtures on bench or floor, or clamps parts together along layout marks Lays out, positions, and tack welds work pieces MIG Welds along vertical, horizontal, and overhead weld lines Connects regulator valves to oxygen and fuel gas cylinders for cutting torch. Turns regulator valves to activate flow of gases, lights torch, and adjusts gas mixture and pressure to obtain desired flame. Holds & guides torch at proper angle to cut metal Examines weld for bead size and other specifications Scarfs or grooves welds and parts Chips or grinds off excess weld, slag, or splatter Other duties as assigned Employee must regularly stand, walk, reach, stoop, lift, climb or balance, kneel, crouch, or crawl Employee must regularly lift and/or move up to 25 lbs., frequently lift and/or move up to 50 lbs., and occasionally lift and/or move 90 lbs. Specific vision abilities required include distance vision, close vision, peripheral vision, & depth perception Qualifications High school diploma/GED/Technical School is preferred MIG Welding experience is a must Six months or more of related experience and/or training preferred Ability to read and comprehend simple instructions, short correspondence, and memos Knowledge of basic math, tape measure reading, fractions & decimals Ability to understands and carry out detailed but uninvolved written or oral instructions Ability to read blue prints and measuring tape Experienced in a fast paced production environment preferred Able to pass all EHS required tests and clearances Company Benefits: • 2 Medical Plan Options - Base HSA (High Deductible) and Buy-Up Medical Plans • Prescription (Rx) Insurance • Health Savings Account (HSA) • 2 Dental Plan Options - Base Dental and Buy-Up Dental Plans • Vision Insurance • Flexible Spending Accounts (FSA's) • Health Care FSA • Dependent Care FSA • Company Paid Base Life Insurance • Company Paid Accident, Death & Dismemberment Insurance • Company Paid Business Travel Accident Insurance • Company Paid Disability Insurance ▪ Short-Term Disability (STD) and Base Long-Term Disability (LTD) Insurance • Employee Assistance Program (EAP) • Voluntary Hospital, Accident & Critical Illness (Cancer) Insurance • 401(K) Retirement Plan with 50% Company Match • Voluntary Pet Insurance • Vacation and Personal/Sick Time • Paid Grandparent Leave • Paid Bonding Leave • Adoption Assistance • Education Assistance (Tuition Reimbursement) About Wastequip Wastequip got its start in 1989 with containers and compactors. But, today, we have evolved into so much more than just a manufacturer of high-quality steel containers and compactors. We are the waste industry's only All-in-One solutions provider - from carts and containers to collect waste to hoists and trash trucks to move the waste to parts, service and technology to keep your operation running smoothly. While we're proud to be North America's leading manufacturer of waste handling equipment, we are equally proud to be a driving force for enhanced sustainability across the waste industry. We are consistently striving to improve our own operations while making it easier for our customers to do the right thing - building a brighter future for all.

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: The Welder II - TIG joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques and operating various welding equipment. Location: Manchester, CT This role will be onsite 100% of the time. Responsibilities: Operate welding equipment to fabricate and assemble materials based on job specifications. Welding processes include, but not limited to, Tig, Plasma, Fusion, Resistance, Auto, Electron-beam, and Stud. Set up welding equipment based on job specifications Maintain welding equipment Read and interpret blueprints and/or drawings to determine the specific welding requirements Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications Responsible for the manufacture and maintenance of component parts and fixtures as required Consistently maintain specific tolerances and accurately perform dimensions Check parts using specified gages or check parts using furnished fixtures to see that dimensions are being maintained. Maintain a neat and orderly work area. Adhere to all company policies and procedures. Follow all applicable safety rules and precautions. Required Qualifications: High School Diploma or equivalent 3 years relevant experience working with a variety of metals, including Titanium metals Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: 5+ years relevant welding experience Trade qualified with recognized apprenticeship Professional welding certification Ability to Read Blueprints: To be successful in any welding job, you must be able to read blueprints quickly and easily and understand how the information presented affects a specific project. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Have working knowledge of shop geometry and trigonometry. Manual Dexterity: To practice as a welder safely and efficiently, you need to have excellent manual dexterity and good hand-eye coordination to be able to perform the complex physical maneuvers required for many welding jobs. Detail Oriented: When completing a project, a welder MUST be very detail oriented, thorough in their work, and not overlook anything that could have larger, unwanted, and even dangerous effects. Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals Knowledge of Welding Techniques: A great welder will have in-depth knowledge about the different welding techniques such as metal art, oxy-fuel, flux core arc, and gas tungsten arc welding. Physical Requirements: Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to frequently sit, stand and walk. Must be able to lift and carry up to 15 pounds. Must be able to have prolonged periods sitting at a desk and working on a computer. Compensation & Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The Certified Welder will participate in the installation or maintenance and inspection of HVAC, Utility and process Piping systems. Role and Responsibilities: Work on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems. Work with materials that include carbon steel and stainless steel Regular attendance at assigned location that may include office or other project sites Clean or prep pipe and fittings using wire brushes or portable grinders Position and secure work pieces utilizing hoists, cranes, or hand tools Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten, gas metal, flux-cored, plasma, and shieled metal arc, resistance welding, & submerged arc welding Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Clamp, hold, tack-weld, heat-bend, grind, or bolt component parts to obtain required configurations Additional duties as directed by job site foreman, project manager, and supervisor Qualifications Essential Skills & Characteristics: Ability to work independently or as part of a team Follow plans and instructions from supervisors or more experienced workers Strict adherence to all safety rules and quality Interact with all co-workers and clients in an attentive courteous manner At times may perform clerical/administrative duties Detect faulty operation of equipment or defective materials and notify supervisors Knowledge of materials, methods, and tools involved in industrial construction Participate in site housekeeping Educational & Experience Requirements: High School diploma or relevant field experience 5 years of Field Experience, trade school or apprenticeship Applicate State Trade License OSHA 10 certification Understanding and development of daily Job Hazard Analysis (JHA) Ability to complete a 6G Coupon for various metals and procedures AZ Corporation is an employee owned, tobacco-free, equal opportunity employer, we do not discriminate based on marital status, race, color, creed, gender, sex, religion, national origin, gender identity, age, veteran status, union affiliation, physical or mental disability, citizenship status, sexual orientation, genetic information, or other legally protected status

About the Role Are you passionate about precision and skilled in the art of welding? Join our team as a TIG Welding Technician where you'll utilize your expertise to craft products that meet the highest quality standards. What You'll Do Execute impeccable welding operations with an emphasis on quality. Validate and inspect all products before passing them for inspection. Work efficiently with time constraints while maintaining machinery in optimal state. Leverage your TIG welding skills to skillfully assemble metal products, ensuring all tools are returned post-project. Communicate challenges to your supervisor and employ strategic problem-solving for typical manufacturing hurdles. Lead discussions with colleagues on workflow efficiencies and propose improvements to the Lean process team leader. Navigate the E2 management system effectively to align with company guidelines. Your Contribution Adapt to additional responsibilities as required, enforcing safety in all operations. Expected Outcomes Champion project timeline adherence and ensure all deliverables meet customer and quality expectations. Adhere to all safety guidelines in every operation. Essential Skills Proven expertise in welding thin gauge material with flawless penetration and aesthetic presentation. TIG welding proficiency paired with foundational MIG welding knowledge. Mathematical acumen and skill in handling shop tools proficiently. Blueprint and technical document literacy relevant to machinery operations. A continuous improvement mindset ready to challenge and enhance processes for efficacy. Strong organizational, multitasking, and communication capabilities. Basic computer skills and inspection gauge knowledge. Background & Certification At least 5 years of relevant manufacturing experience with a valid driver's license. FLSA CLASSIFICATION: Non Exempt PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; or smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Personal Protective Equipment (PPE) may be required. *The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.* Proficiencies: • Welding Setups for Production • Blueprint Reading Technology: • MIG Welder • TIG Welder • Roll Forming Machine

If you're looking for a special place to build or grow your career, you've found it. Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impact. With interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses around the globe, chances are, we have something special for you. Position Overview Mott currently has an opening for a High Purity Technician (HP Tech) on the 3rd shift. This position reports to the Production Supervisor and is located at our 75 Spring Lane facility. Role Profile & Responsibilities The HP Technician performs kitting, manufacturing, inspection, and packing of filters, diffusers, porous assemblies, and other components for both High Purity and Industrial lines. · Process HP Products: Meet production schedules and meet customer expectations. · Quality Control: Maintain less than 2% scrap or rework. · Inventory Accuracy: Check and maintain accuracy of components in WIP and stock. · Compliance: Adhere to QMS Procedures and HP cleanliness requirements. · Environment: Maintain standards in the Clean Room work environment. Requirements & Skills · Education: High School Diploma or equivalent (2-year technical degree is beneficial). · Experience: 1-3 years in a manufacturing environment; clean room and TIG welding experience is a plus. · Technical: Basic computer skills, blueprint reading, and use of inspection tools. · Soft Skills: Detail-oriented, team player, proactive, and a hunger for learning. Are you ready to join a different kind of company where our people, our culture, and our commitments are centered around providing trusted solutions that improve lives around the world? Total Rewards The compensation range for this position is $0.00 - $0.00, depending on experience. This position may be eligible for performance based bonus plan. Benefits Package Our comprehensive U.S. benefit offerings include: Health benefits, 401(k) retirement savings program with company match, PTO, and more. More information on our benefits and rewards can be found on our career page: ********************************************************** IDEX is an Equal Opportunity Employer. IDEX gives consideration for employment to qualified applicants without regard to race, color, religion, creed, genetic information, sex, sexual orientation, gender identity or expression, marital status, age, national origin, disability, protected veteran status, or any other consideration or protected category made unlawful by federal, state or local laws. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact our Talent Acquisition Team at ********************** for assistance with an accommodation. These contact tools may be used only by individuals with a disability for accommodation requests. Do not inquire as to the status of an application. Artificial intelligence is not used to screen, assess or select applicants. This posting is for an existing vacancy.

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Operate various welding, soldering and brazing equipment to manufacture heat exchangers, water separators and environmental control system components while practicing and complying with environmental health and safety directions and procedures. **What You Will Do** + Work from various instructions such as specifications, sketches, technical orders, blueprints and other written and verbal instructions within established methods and procedures. + Perform fusion welding, salt braze torch braze, plasma cutting, electric-arc, heli-arc, and acetylene welding processes. + Ensure that all documentation including specifications, blueprints and applicable tools, gages and fixtures are quality compliant and traceable. + Perform preventative maintenance. + Participate in audits of processes, procedures and work areas. + Responsible for own work. + Move parts and materials to designate locations in accordance with normal material flow procedures. + Keep equipment and surroundings neat, clean and organized. + Perform related duties as required within the scope and skill level of this job function. + **3rd Shift: 12am to 8:30am, Monday to Friday.** + **Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.** **What You Will Learn** + Operating within Lean Manufacturing method. + Welding in accordance tight specifications and tolerance in the aerospace. + Cross-functional collaboration through various types of manufacturing and processes. **Qualifications You Must Have** + 1-2 years relevant experience. + High school diploma or GED **Qualifications We Prefer** + Production welding Experience + Experience with TIG and Aluminum welding + Experience in the aerospace industry + 5-7 years of relevant experience **What We Offer** Some of our competitive benefits package includes: + Medical, dental, and vision insurance + Generous 401(k) plan that includes employer matching funds + Collins provides eligible employees with paid time off + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Ovia Health, fertility, and family planning + Adoption Assistance + Autism Benefit + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + Doctor on Demand, virtual doctor visits + Bright Horizons, child and elder care services + Teladoc Medical Experts, second opinion program + And more! **Learn More & Apply Now!** We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range for this role $35.40 - $44.47 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. **\#TopOpps** **\#P&CPM** **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Essential duties The position is responsible for performing all functions of welding ensuring personal and product safety, quality, and productivity. Set up, adjust, and operate welding equipment to weld castings, Sheetmetal details, etc. Following Job Operation Sheets to complete repairs as necessary Complete moderate to advanced fitting and welding tasks while applying standard practices. Capable of obtaining and holding required weld qualifications/certifications Perform plug welds in castings, cosmetic weld build up and standard join configurations Check required dimensions using calipers, micrometers, height gages and other inspection tools or fixtures. Identify any Red flag problem areas. Interpret and follow written instructions, sketches, weld schedules, drawings and documents. Involvement in development work, fixturing and process. Work independently with limited oversight. Meet or exceed operations standards for efficiency. Knows when to stop and find appropriate interpretation when necessary. Maintain thorough understanding of how to produce quality parts. Must be able to use mathematics relevant to functions. Qualifications and Education Requirements 5 Plus years TIG/GTAW experience. High school diploma or equivalent. Welding trade school or equivalent experience. Must pass internal welder qualification for welding magnesium within introductory period. Must qualify for stainless and aluminum certifications within the first year. Ability to read and interpret blueprints/drawings. Experience in welding aerospace components comprised of inconel, aluminum, mild steel and stainless steel. Keen attention to detail, accuracy, and safety. Familiar with a variety of metals and finishes. Use mathematical and reading skills. Experience with measuring devices such as meters, gauges, calipers, and other measuring instruments. Working knowledge of safety protocols. Experience working with close tolerances. Experience working in an aerospace manufacturing environment (NADCAP and FAA requirements). Ability to follow standard precautions using personal protective equipment as required. Meets D17.1 visual acceptance criteria (corrective or non-corrective). Strong communication skills as well as a team player. Preferred Skills Aerospace welding background. Manufacturing background. Physical Requirements Ability to lift up to 50 pounds. Ability to stand and sit for long periods of time. Ability to perform repetitive motion (rotating wrists, using small/large tools). Ability to tolerate constant noise (machine motors, grinding, high frequency etc.). Pre-employment requirements All applicants must satisfy a pre-employment DOT/FAA Alcohol & Drug Screen and a background check. This position must comply with our FAA regulated Random Alcohol & Drug Program for Safety Sensitive position. First Shift 7am - 3:30pm (approved OT prior to 7am & Sat mornings) Second Shift-3:30pm - midnight (approved OT after midnight) 10% differential

The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems. Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites; Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems; Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press); Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Fill holes, and increase the size of metal parts. Detect faulty operation of equipment or defective materials and notify supervisors. Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. Preheat work pieces prior to welding or bending, using torches or heating furnaces. Hammer out bulges or bends in metal work pieces. Develop templates and models for welding projects, using mathematical calculations based on blueprint information. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives. Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials. Set up and use ladders and scaffolding as necessary to complete work. Use fire suppression methods in industrial emergencies. Detect faulty operation of equipment or defective materials and notify supervisors; Direct helpers or apprentices in appropriate tasks; Must maintain strict adherence to safety rules and quality; Participate in site housekeeping; Interact with co-workers in an attentive courteous manner; Additional duties as directed by management. Qualifications SKILLS & EXPERIENCE/REQUIREMENTS: Ability to work independently or as part of a team; Experience: 5 years of Field Experience, trade school or apprenticeship; Knowledge of materials, methods and tools involved in industrial construction; Attention to detail; Ability to keep hand and arm steady; Be highly focused on customer satisfaction expectations; Good documentation and record keeping; Preparation of miscellaneous paperwork including time sheets, daily reports and material requests; Competency in Permit Required Confined Space; Understanding of and strict adherence to daily Job Hazard Analysis (JHA); Appropriate state certification or license; OSHA 10 certification. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL DEMANDS: Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs. WORK ENVIRONMENT: Industrial manufacturing facilities Power generating facilities Chemical manufacturing Healthcare & Institutional Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces